Stands for climbing roses with their own hands. Supports for climbing roses: how to make your own

Nothing decorates a suburban area like fresh flower arrangements. That is why homeowners usually start spring work from the improvement of the territory and the arrangement of flower beds. Climbing roses are a graceful, magnificent decoration for any exterior. suburban area. However, such a refined culture must be placed on a stable support. Only in this case, the flowering of the rose will become a real decoration of the garden or yard. Next, you will learn about different varieties climbing roses, as well as how you can make a support-frame for it with your own hands.

Features of growing climbing roses

The rose is known to be the queen of flowers. No one even tries to challenge her title, because this flower is graceful and perfect in its bright, exquisite beauty. The scent of a rose is her second undeniable dignity: it envelops, fascinates, attracts.

In hot climates, climbing roses can grow up to 10 meters, but in temperate latitudes - up to 3-4 meters.

Mesh trellis

Such a support can be easily made with your own hands. To do this, you need to dig poles made of wood or metal at the required distance, then stretch the mesh. In order for the design to fit perfectly into the design of the site, it is better to paint the pillars in a suitable color.

Mesh trellis

The trellis can be made from wooden planks, securing them with a grid between the bars. A similar design for a climbing rose will allow you to form a spectacular bush.

Arches and pergolas

Design data - perfect solution for the arrangement of spacious suburban areas. Arches and pergolas can also be made by hand. Pergolas are a lattice roof fixed on pillars. The dimensions of such a support are calculated individually and depend on the design idea. Poles can be wooden or metal. The advantage of a pergola is that this support can also serve as a pergola. You may also be interested in construction technology country gazebo from glued beams, see details.

Arches differ from pergolas in their smaller size and curved shapes. They can be installed at the entrance to the garden or for the purpose of decorating the surrounding area. For the queen of flowers, forged or wooden arches are often made.

Poles with supports

Such supports can also be made by yourself from wooden or metal rods and poles. Pillars for creating supports are very convenient: compact, not very wide. They are often used as supports for roses that climb slowly. Any poles are suitable for a climbing queen: in the form of a column, cylinder or cone.

Climbing roses do not have tendrils or suckers, so without additional support they will not be able to grow up.

In order to build a cone-shaped support, you need to install several wooden rods or bars in a circle and connect them at the top. Such a stand is suitable for any curly flowers.

Other types of metal supports

There are many other varieties of supports for climbing roses. Let's consider a few more options:

• support "striving up" has the form of a tower, made of a metal base; inside the structure there is a stand for a container in which it will grow fragrant flower. Such a "tower" will look especially good on an open terrace;

metal support

• metal column: versatile and reliable. As a rule, it is made of galvanized steel, which makes it strong enough and resistant to damaging effects. environment construction.
• "Eiffel Tower": this support is a crossbeam with an openwork structure, ideal for the side shoots of a rose.
• flip arcs: they can be placed on both sides of the track. A natural corridor is created, the roof and walls of which will be gracefully braided with roses. If you still install benches, then such a flowering support will allow you to make cozy place for relax.
• prop-wigwam: suitable for a garden decorated in the style of the Indians. To do this, you need to weave a cone from a willow or birch bark with a sharp crown, to which the roses will reach with their shoots.
• "Steel Obelisk"- This is a support made of pipes. Ideal for roses, roses, characterized by unhurried vegetation.

Video

An example of creating a support for a climbing rose with your own hands, see the video

Conclusion

So, making supports for climbing roses on your own will not be difficult. It is enough just to evaluate the variety of rose that needs support, and general style site. What to choose as a support for your beauty depends on your design idea. As for the plant variety, it should be selected depending on climate zone and landscape. If necessary, climbing species can be combined with.

Weaving pink stems always look more tender than their flowerbed relatives. But what kind of rose will curl without support? Flowering shoots of roses need reliable and beautiful base. We decided to tell you today about the varieties, styles and materials of support for climbing roses, and how you can make them yourself.

What should be the support for the rose?

Some novice flower growers believe that it is enough to plant a climbing rose near a fence or wall of a house, and it will find a place for itself to weave. This is fundamentally wrong. There are several important requirements that the basis for weaving roses must meet:

• Reliability. It is better to choose a support that is stable and strong enough so that it can withstand the lush flowering branches of roses. Arches, tripods and other structures should be dug in or well fixed to the ground with iron stakes.
• Decorative. A stand for a rose should organically fit into the design of the site and have an attractive appearance, especially if the rose does not completely braid it.
• Correspondence to the rose variety. Bulky supports are not advisable to install for miniature roses, in the same way as too small arches will quickly “become small” for tall beauties.
• Compactness. One of the tasks of a support for a climbing rose is to place it compactly on the site. Tapestries and tripods should take into account the length of the shoots and form a beautiful dense flowering bush.
• Profitability. Ready-made arches and stands for roses are not cheap. A great way to save money is to make a support for roses with your own hands.

The support should be selected taking into account varietal features roses. It should easily support the weight of the bush.

Types of supports for climbing roses

Option number 1: trellis mesh

This is the simplest support that you can do yourself without spending a lot of time and money. You can purchase a chain-link with large cages, or stretch a rope net between two supports. Such support is suitable for graceful pink varieties. You can do it like this:

• Determine a place for support.
• Dig wooden or metal poles along the marked edges.
• Open the pillars with varnish or paint.
• Stretch the mesh.

A trellis can also be made from thin wooden boards. It is necessary to prepare a frame from the bars and stuff the boards between them with a grid.

With the help of a lattice screen, a bush is formed in the form of a screen. Such a structure can divide the yard into separate zones

A climbing rose bush, supported by a trellis, can be shaped like a fan

Carved wooden pillars look beautiful, between which fragrant pink branches are woven. Now it remains to direct the stems of roses in the right direction and form a lush blooming rose stand as the bush grows.

Using a trellis near the wall, you need to maintain a distance of 15-30 cm. This will not disturb the air circulation around the plant

Option number 2: pergolas and arches

Arches and pergolas are created according to a similar principle. The advantages of this type of supports are constant decorativeness, functionality and good capacity for rose bushes.

For roses with thin flexible branches, you can use arches made of metal arcs as a support.

Pergolas are a lattice roof for weaving roses on support pillars. Such structures can serve as a summer gazebo in the garden or a seating area. Poles are more often used from metal, and the top can be made from wood. The length and width of the pergola is chosen individually. It is easy to make such a support on your own - you need to install poles and knock down a wooden grate above them.

arch from wooden poles erected for strong roses with long shoots, which, growing up, can reach the top of structures

Arches are smaller and curved. They are used for zoning the garden, decorating the entrances to gazebos and decorating garden paths. Wooden arches for climbing roses, painted in White color. Such supports create the effect of country comfort and impeccable cleanliness of the garden. Forged arches are also in demand. They look great in the garden classical style.

Option number 3: Poles and cones

This type of supports can also be safely made with my own hands from wooden or metal rods and poles. A single pole along which a rose will weave must be well dug in and have the right height.

Choosing a stem support standard rose, it is worth considering that it should not stand out. It must be installed from the denser side of the crown.

To grow roses on a trunk, you need to choose a long, strong rosehip shoot 1.5-2 m high. At a height of 60 to 150 cm, a varietal rose is grafted

To make a support in the form of a cone, you need to install several rods or wooden bars in a circle and connect them together at the top. Such a cone-shaped stand can serve as the basis not only for roses, but also for other climbing flowers. This is another opportunity to use your imagination to create decorative flowering arrangements.

A climbing rose is not able to curl itself - it needs to be guided and tied up. When tying, the branches should be directed to the side. This contributes to the formation of shoots growing up

1. For support under roses, you can use metal, wood, plastic and even stone. It all depends on the design of the garden, the variety of roses and the price of the issue;
2. The distance between horizontal bars the supports should be at least 50 cm. If the bush branches strongly, make additional cross bars;
3. Large blooming roses will look good on large supports in spherical shapes. Flowers with small buds will perfectly decorate vertical stands;
4. The old one can also become a support for a rose. wooden fence or barn. It is necessary to plant rose bushes at a distance of 50 cm from such a support and make additional retaining elements;
5. Be sure to process and paint supports for roses so that they do not become a source of infection.

Crossbeams on the supporting structure and grating should not be spaced too often

As a support for weaving varieties of roses, you can use various designs. To make it more convenient to tie up the shoots, horizontal bars or lattices should be present on the supports.

The trellis support must be strong and stable so that gusts of wind cannot overturn it.

Whichever option you choose to support climbing roses, you need to properly plant roses and care for these flowers. Follow the correct weaving of roses, cut off excess shoots on time and feed your rose bushes with nitrogen and mineral fertilizers, and then your roses will decorate any trellis.

Climbing roses are one of the most beautiful, graceful varieties in the flower world. They are able to decorate any place. Dacha is no exception. Landscape designers often use the bush variety to decorate gardens and parks. Why are only one arch, created from these graceful plants. And hedges of climbing roses! The variety of color variations is surprising, the competent combination of which can transform the space. This article will go into more detail on how to tie climbing roses.

General rules for caring for a climbing (curly) rose

In order for climbing roses to become a decoration of space, it is necessary to provide them with decent care. In the case of an attentive and careful attitude, these "royal flowers" will delight you year after year. In addition, they have a gorgeous, subtle, elegant fragrance that contributes to the overall enchanting atmosphere. Seeing only once how climbing roses bloom, you will want to plant such flowers in your garden.

How to tie a climbing rose

For this variety, three components are extremely important:

• top dressing;
• Watering;
• Pruning.

top dressing

There are plants that can easily do without fertilizer. Roses of this variety do not belong to this category. They love to be fertilized. Literally before our eyes, they are transformed from " proper feeding". First of all, you need to feed roses after pruning in spring period. The best fertilizer in this case will be rotted manure and ammonium nitrate. In size: 3 kg of manure under a bush and 25-30 grams per 1m2.

After 14 days, it is worth carrying out the process of feeding with other means: mullein - 3 liters, potassium salt, ammonium nitrate 10 grams, superphosphate - 40 grams. This mixture fertilizes the earth. When the roses begin to bloom a second time - add ash in the amount of up to 100 grams per bush, superphosphate - 40 grams, potassium salt 15 grams.

Watering climbing roses

On average, flowers are watered once a week. There are also factors to consider here, such as weather. There is a nuance in the technology of watering: you need to water slowly, slowly, to the very root. Such watering will prevent the possibility of the formation of surface roots. Most auspicious time for watering - early morning.

Watering a climbing rose - be sure to follow the measure. Closer to autumn, watering should be reduced. Waterlogging the soil can lead to plant diseases. In October, the watering procedure is not required. Winter is easily tolerated.

Pruning climbing roses

Pruning is a must for this variety of roses. For the formation of the crown, obtaining lush and abundant flowering and maintaining the culture in a healthy state.

rose pruning

Pruning should be done carefully so as not to damage either the plants or yourself. You need to use a well-sharpened tool.

In some cases, pruning has its own characteristics. General basic pruning rules:

• Using a sharpened cutter;
• The cut is made at an angle and at a distance of 5 cm from the kidney;
• The cuts are made very carefully;
• Timely need to remove dry, frozen stems;
• Shoots that have not developed should also be removed.

Why make supports for climbing roses

The question may arise: “Why support a climbing rose?”. The fact is that climbing roses do not have any hooks on the stems so that they can curl around them on their own. They need to be fixed on supports, setting a certain direction, fixing on supports. Mounting climbing roses solves problems such as:

• Creation beautiful shape bush;
• Abundant flowering throughout the height;
• Making the crown more rare, thereby providing a favorable climate inside the crown;
• Healthy stems and foliage give even more beautiful view climbing roses.

How to tie roses to a support

rose support

Best of all, in order to avoid additional worries, it is worth giving in advance desired shape run away. Immediately you need to establish a support by planting a seedling. This will eliminate the likelihood of damage to the emerging root system of the plant.

Note! You can give any direction to the stems, trying to get decorative effect to the maximum.

There are several options for how to fix a climbing rose:

• Horizontal garter - on a lattice or trellis;
• Spiral - tying a pole or other vertical support;
• Vertical - along tree trunks, columns of arches;
• Fan-shaped - next to a wall or fence.

"IN spring time climbing roses definitely need time to lay buds on horizontal shoots. Hurry to lift from the support - it makes no sense. It is necessary to wait a while for the buds to appear up to 3-5 cm on the shoots of the second order. Once I tried, without waiting for the young shoots to grow, and decided to attach them to a support. As a result, the entire pipe was practically bare: there was no flowering. Once again, I was convinced that I needed to wait until the kidneys swell.

When placing climbing roses on a support, it is required to take into account that the laying of pink shoots occurs at an angle of 30 degrees. In accordance with this, they are placed on supports.

When horizontal arrangement- the growth of lateral branches will increase, which are absolutely not needed in this case.

Additional Information! When the branches are directed at an angle, in a spiral, this contributes to more better education buds. Flowering lasts a long time.

When placed vertically climbing roses you will need to artificially create branching, because the flower will grow in length. Here it will be necessary to bend the top of the plant to the bottom to change direction.

A rose bush can be formed in the form of a fan, which will become a screen, a partition or will act as a decoration for walls, fences.

Climbing rose on the partition

Do-it-yourself rose arch: detailed guide, diagram

On a note! The arched version is very suitable for garden decoration. By itself, the arch fills the space with a certain mystery, elegance. When climbing roses are on it - this is an unforgettable view.

Most often, arches for climbing roses are placed near the entrance to the courtyard. This is not the only place where she "will come to court." An excellent location would be a place next to the gazebo. Arches are usually made of wood, metal. There is also a plastic version. The strength of this material leaves much to be desired. The most durable are forged arches. They are mainly used as a support for climbing roses.

In order to make a support with your own hands, you need to decide on its purpose. You can pre-create a drawing. Will it serve only as a decoration in a flower bed or will it be an entrance, a place to relax. The purpose is taken into account when choosing the material and thickness of the bases, transverse rails. Below are recommendations on how to make an arch for a climbing rose with your own hands.

Algorithm for creating an arch with your own hands

Which arch to choose?

Each material has its own advantages. So, a tree looks great in combination with greenery of leaves, with flowers. Usually thick stems are attached.

Note! For metal arches, graceful thin stems of roses, with small flowers, are better suited.

What is better to make an arch for a rose yourself or buy a ready-made one?

It depends on the size of the arch, the availability of building skills, the amount of free time and financial capabilities.

If making such an elegant garden accessory is a pleasure, and inspiration is available, then you can safely create it yourself.

An arch with climbing roses wrapped around it will become a unique decoration of the garden. It is worth the effort and time spent.

Every gardener needs to know how to tie a climbing rose so that it pleases with its flowering and thin stems do not break from improper support.

Many would like to have an unusually beautiful climbing rose on their site, which can become a real decoration of the garden. Due to its ability to curl, the flower is used to decorate arbors, arches, alleys, even ordinary fences - such designs look really amazing. In order for a climbing rose to take root in your area, it needs support, otherwise its shoots will simply spread along the ground. At first glance, the designs look complicated, but it is quite possible to make something similar yourself. In this article we will tell you what supports for roses are and how to make a support for a climbing rose with your own hands.

The first thing to do is to choose the right place, because the shoots themselves must grow where they are provided. optimal conditions. Your pink corner should be located in a place where there will be no discomfort for the roses themselves.

So, for example, it is recommended to plant plants on small hills, where there will be a low level ground water otherwise there is a risk of root rot. The beauty also needs protection from the wind - make sure that with north side there were other trees or a house. Do not forget about the sun, which should warm the flowers with its rays. However, a small shadow should also be present, because if you do not cover the rose from the sun, the plant will grow weak and lethargic.

Types for climbing roses

Although there are a great many supports for a rose, it is customary to distinguish several main types:

• arches or pergolas;
• tapestries;
• gratings;
• poles.

It should be remembered that the opinion that the rose will curl on its own, and it just needs to be provided with support, is fundamentally wrong. The main shoots of the flower must be directed so that they do not grow up, but parallel to the ground (or at least at an angle of 45 degrees) - this is the only way you can observe abundant flowering your pet.

In addition, whatever support you choose, it must be reliable so that the overgrown rose bush didn't knock her to the ground. Also choose a design that fits well into the overall atmosphere of the site (in case the shoots do not braid the entire structure at once). Choose a flower variety according to the structure itself: if the bush subsequently grows to huge size, it is pointless to build a small support for him.

Mesh trellis

Tapestry is the simplest and most versatile structure. As a rule, with the help of this design, the territory is divided into zones (this is how you can divide the garden, for example). It can look like a rectangular structure, which consists of a frame and a lattice inside it. The base itself and the grate inside can be either wooden or wire. Most often, the first option is chosen, painting the structure with white paint to give it a more noble look. Although in most cases, over time, the bush grows quite strongly and the trellis is completely hidden under it.

Arches and pergolas

Very beautiful decorative structures that can even serve as a gazebo. Pergola is summer roof, equipped with bars, which is intended just to be braided with pink shoots. It can also serve as a summer gazebo, in which it is pleasant to sit on a hot day.

The bases of pergolas are most often metal, but it is preferable to build a roof from wood. arched structures can also be made from various materials: metal ones are suitable for growing miniature flowers, but wooden ones are suitable for a plant with strong thick shoots. If there is free space, you can also put several arches located one after the other - it will look spectacular.

Cones and poles

The conical support looks like a collection of several wooden beams that are installed in a circle and connected at the top.

The column is also a very convenient design for climbing plants. It takes up very little space, while performing the necessary function. For them, they often choose those that grow very slowly.

How to DIY

So, we have described the main designs that are made for these plants. Now consider how to make supports for a climbing rose.

Next, you should make a vault for the arch. Around the pillars, observing the same indents, set in a circle wooden bars or metal rods. They are attached at the base and on the top beam. It is along them that shoots will subsequently curl, and they will take an almost horizontal position.

To build a pergola, you need a lattice or mesh that can be easily removed. Thus, it will serve well in the summer, and with the onset of cold weather, it will be possible to clean it indoors.

The pillar is the easiest to make - it is simply driven into the ground and horizontal circular fragments are built around the support, made of any materials (wood, metal). It is they who contribute to the required fixation of curly shoots so that they braid the structure in a spiral.

For the support cone, wooden bars or metal rods are fixed in a circle, which will converge at the top. By the way, this design can be used not only for roses, but also for other climbing plants and flowers.

1. The very first and most important rule: first make a support - then plant flowers!
2. When choosing a material, be guided by the following factors: variety of roses, price category, design features.

Climbing rose - the most showy plant for vertical gardening. The question of her correct garter is by no means an idle one. The problem is that the ground mass of this plant is large, and not every support can withstand it. The design options for supports for climbing roses will be discussed in the material.

Varieties of climbing roses: ramblers and climbers

First of all, you need to determine which variety the climbing rose, which needs a garter, belongs to (See also the article ⇒). There are two of them:

Varieties of climbing rose	Characteristic	Garter Features
	A strongly growing variety - the length of the lashes can reach 10 m. The lashes are thin, creeping, flexible even when mature, with numerous spikes.	Shoots can wrap around the support in a spiral. The height of the support must be more than 3 m.
climber	Conditionally weaving rose. Shoots are thick, rigid, up to 3-4 meters long, erect.	They can do without support, it is enough to tie the shoots in the right direction.

In this way, rambler roses suitable for creating tall flowering arrangements around a support of any shape.

Common mistakes when tying climbing roses

When tying lashes of roses of any variety, it is important not to make three mistakes:

1. Overly tight strap.

The epidermis of the rose stem is strong enough, however, it can also be injured by a too rigid garter. Infectious agents easily penetrate into a place with a torn bark, and the infected shoot will have to be cut off.

1. Fastening to a support in many places.

Trying to firmly fix the shoots, we must not forget that in the fall they will need to be removed and laid under cover. Multiple garter will greatly complicate this task. It is enough to wrap the whips of the ramblers around the support in 2-3 turns and tie it up only at the top. Climber shoots are tied up in 2-3 places.

1. Fastening to a flimsy support.

In the midst of flowering, climbing roses become very heavy. If the support is not strong enough, any wind will overwhelm it, forcing the grower to work hard to untie and lift the bush from the ground, and then restore the structure.

Tip #1 Climbing roses grow in one place for many years. Therefore, it is advisable to mount the support already during preparation. landing pit, cementing the ground.

Arches, trellises or ladders: what to choose?

Gardening centers offer a variety of ready-made Constructive decisions for vertical gardening:

Construction form	Peculiarities	Approximate cost, rub.
	Made of metal, may include forged decorative elements. Suitable for landscaping with rambler roses.
Tapestry (lattice panel)	They do not exceed 2 meters in height. Standard Width one span - 1 meter. Under roses, at least two spans are usually purchased. Suitable for landscaping with climbers. They fit worse under ramblers - only when launching lashes in a horizontal direction.	5700 for 1 span
	Narrow design, about 40 cm wide. It can be classic wooden or forged, figured. The height is not more than 2 meters. It is only suitable for letting the rambler on the wall, after which the lashes will need additional support and a garter.
Lattice screen with flowerpot	They are a wooden or plastic trellis with a lattice, in the lower part of which on both sides there are boxes for planting. Suitable for growing climbers in containers if the box is at least 60 cm deep and the screen is at least 2 m wide.
	Lattice arch for creating flowering tunnels, at least 140 cm wide. Can be wooden or metal, with forged elements. Suitable for landscaping with ramblers.

The location of the supports for climbing roses depends on the design intent of the grower. So you can arrange the entrance to the site or to the house, create an arched tunnel over the path or set up a support with a rose as the central figure in the rose garden.

Of great importance is the illumination of the area on which the climbing rose will be located. It is necessary to choose the brightest place, protected from cold winds, since roses bloom worse in the shade and grow more slowly.

Do-it-yourself obelisk for a climbing rose

Supports for climbing roses are expensive. However, you can minimize costs and do it yourself. The simplest option is the arrangement of a pyramidal structure. These are sold in garden centers, but they are usually not high enough (1.5 m) and are not suitable for vigorous ramblers.

For independent construction an obelisk for roses will need two 6-meter boards 25 mm thick, wooden slats 25 mm wide, hacksaw or jigsaw, as well as self-tapping screws. The sequence of work is as follows:

• cut off 1 meter from each board;
• divide each segment in half and set aside;
• divide the rest of the boards into segments of 2.5 m;
• dissolve the boards lengthwise into slats 4 cm wide;
• from half-meter segments make a spacer in the lower part of the obelisk;
• fix the rail spacers at the corners and connect them from above;
• fasten sliced ​​thin slats in the form of a ladder between the legs of the obelisk.

Climbing roses are planted on all four sides of the obelisk. As they grow, flowering "pillars" form.

Do-it-yourself arched pergola for a climbing rose

An exceptionally effective element garden decor is a pergola entwined with roses. You can also build it yourself:

• dig in wooden beams or metal poles with a step of 1.5-2 m in two rows - opposite each other;
• tie them together with a lattice of slats or metal rods;
• tie the rows together with the same lattice on top.

Roses are planted with outside rows and go up the bars. After 3-4 years, long climbing ramblers are able to completely close the pergola.

The pergola allows the imagination of the landscape designer to roam. For example, it is possible in this way to assemble not a continuous tunnel, but a series of wide arches, slightly spaced from each other. This option is good because it does not create a large shading zone.

One more spectacular option using a pergola - creating a decorative porch in front of the entrance to the house. Also, with its help, you can successfully arrange a summer veranda.

Tip #2 For a pergola, it is not necessary to buy any expensive material. Today very popular in landscape design enjoys a rustic style. Its feature in use natural materials with minimal processing. For a rustic-style pergola, for example, large branches roughly connected to each other are suitable. garden trees after cutting.

Keeping lashes of roses along the wall of the house

This option is suitable for both ramblers and climbers. The difference is only in the height of the structure. For climbers, width is more important than height. Long climbing ramblers can be placed on the wall up and down, and in a fan.

To put a climbing rose on the wall, you need to land it at a distance of about 50 cm from the building. So the plant, on the one hand, will have enough space to form a good root system, and on the other hand, the lashes will freely reach the first support.

There are three common options for supports for weaving roses on the wall:

When decorating buildings with climbing roses, it is important to keep in mind one nuance: it is undesirable for the shoots to fit snugly against the wall, especially if it is wooden. In this case, the wall may become damp. Therefore, the installation of supports should provide for some clearance for good aeration.

Garter lashes roses to support

You can fix the shoots of roses directly to the support, for example, using the following materials:

Material	Advantages and disadvantages
Nonwoven Tapes	Soft, elastic, do not injure the lashes, hold the shoots well. The disadvantage is that they are not aesthetically pleasing, they require masking.
plastic rings	It is convenient to attach the whips and remove them from the support. The disadvantage is that they slide along the support, do not withstand a lot of weight, they are only suitable for supporting thin side shoots.
Pieces of twine	Firmly fix the whips to the support. The disadvantage is that at a high load they can injure the epidermis of the shoots.

When thinking about how to tie the shoots to the support, you need to focus on two conditions: the material should hold the weight of the whip well, but slide and crush it as little as possible.

Topical questions about vertical gardening with roses

Question number 1. Is it necessary to remove the roses from the support before winter?

The conditions of Russian winters are such that most climbing roses have to be covered. It's hard to do this on a base. To reduce labor costs, you can make a support in the form of a removable grate, which can be placed on the ground without untying the lashes from it.

Question number 2. Is it possible to put a climbing rose on a chain-link or a filament net for cucumbers?

According to the grid, the Climbing Rose can grow if the grid is well stretched between the posts and fixed. Cucumber mesh is a bad option. She has a high windage, and in the event of a wind, the support may collapse.

Question number 3. What support to choose for a spray rose with long falling shoots?

Such a rose can be planted in a flowerpot with a lattice screen or at any trellis. Fences are also successfully decorated with shoots of spray roses.