Do-it-yourself panel from slats. Wooden panels to order

A wooden panel made of natural materials complements the interior of the room and forms a visual accent. You can place it in a room or office, but before that you should check how well it fits into the interior. Beech, birch, alder, oak and pine are used as the basis for creating the composition. The technology came from Thailand, where natural materials are in fashion.

The eye is most pleased with handmade products, so designers try to use them more often. First you need to measure the wall. After that, a board with the required parameters is bought or manufactured. Designers advise adding about 5-7 cm to the original size, necessary to make possible adjustments.

To work, you will need the following tools:

• Scotch tape.
• Paint brush.
• Transfer glue.
• The desired image to be printed on a laser printer.

With the help of masking tape on plywood or a harder tree, the contours of the future picture are formed. The printed image is carefully smeared on the front side with transfer glue. They also need to lubricate the wooden base. You can find glue at an art supply store. After that, the image is carefully transferred to the surface.

A paint roller will help to avoid the appearance of wrinkles and small accumulations of air, which carefully smoothes the canvas. The minimum drying time for the applied adhesive is 70 minutes. A hair dryer will speed up the process.

When the glue dries, use a small brush to gently moisten the pattern with water. The wet image is removed with a sponge for washing dishes.

If everything is done correctly, then paint with a pattern will remain on the plywood. It is topped with a layer of clear lacquer for shine and durability. Creating a panel with your own hands will take no more than 3 hours. The main thing is that when choosing a design solution, the features of the room are taken into account.

Wooden panels in the interior: practical advice

The versatility of the panel lies in the ability to complement the interior of a residential or non-residential premises.

In this case, it is necessary to take into account several factors that affect the final choice:

• Room size.
• The degree of illumination.
• Dominant colors.
• The type of material used in the room.

Acquaintance with the room begins with the living room, in the interior of which it is preferable to use a large product. Depending on the geometry of the room, a panel is ordered covering ½ part or the entire wall. At the request of the client, it is supplemented with artificial lighting.

In an ordinary apartment, a pacifying landscape looks better, for example, Indonesia and its nature. Travel fans choose discreet colors. A wooden panel includes sights or landscapes of cities where you want to visit.

The diametrically opposite is recommended for residential premises, where an active lifestyle is at the forefront. Works made of wood include images of nightlife in the metropolis, abstract forms, reproductions of contemporary artists or dynamic scenes of the violence of the elements. In the luxurious interior, decorative panels depict the ancient part of the famous city, stairs or the Garden of Eden.

In the living room there are restrictions in terms of possible options. In a medium-sized room with a standard window area, it is allowed to place a panel in the corner of the room. A few visual centimeters of the room will be added by a spiral staircase applied to the panel. In small rooms, it is recommended to use double patterns. It is important that both drawings are symmetrically arranged.

Kitchen. It uses wall panels made of types of wood that can be cleaned. It is forbidden to place them near the stove, refrigerator or sink. As a drawing, it will be optimal to depict fruits and berries. Light compositions are chosen for the bedroom and the nursery: pets or water surface .

We create a panel from a saw cut of a tree

Before starting, it is better to view photos of various options that will help determine the concept. After that, a layout of the work is made. It must be done in full size. This will help determine the size of the cut. As a base, it is better to use birch or alder.

It is not necessary to call the master to perform the work. Enough basic skills to work with tools.

You need to follow the following procedure:

• Carefully sand the saw cut with sandpaper.
• Apply acrylic primer or white paint to the cut surface with a foam sponge.
• The drying process takes up to 65 minutes.
• Sand after drying.
• A pre-printed picture must be cut along the contour of the saw cut.
• If it contains many small details, for example, the image of coins, then 1-2 cm should be left from the edge to the first element.
• Island landscapes, for example, Cyprus or Indonesia, then cropping goes without additional cm.
• Lubricate the reverse side of the picture with decoupage glue.
• Put the image on the cut.
• Smooth out with a roller.
• It is forbidden to smooth the surface of the picture with your hands, because ordinary material or composite forms noticeable stripes under the influence of pressure and moisture.
• When the workpiece dries, the excess is removed from the edges with a file.

Additionally, you can apply small decorative elements, for example, you can create three-dimensional compositions using the right pieces of fabric matched in tone. In the Eastern interior, you can use additional decorations from branches and leaves.

Wood carving panels: minimalist solutions

To create the whole composition, you must first choose the right material. If it is better to make simple drawings on plywood, then it is advisable to place a three-dimensional diptych on a birch or aspen. Then, the level of detail of the sketch is taken into account. Simple images of people or animals can be carved on soft linden.

For other options, you need to follow these recommendations:

• For a bath, you need to take a birch with a mandatory treatment with waterproof varnish.
• The entrance hall will be decorated with a large composition of boards, on top of which a drawing is applied.
• For a country house, it is better to take linden or pine.
• In the living room, a bamboo panel is suitable.
• A well-lit room will be complemented by alder.
• A blank for a nursery is always hypoallergenic.

Do-it-yourself ship panel made of wood (video)

A panel made of natural material will decorate the interior, subject to the right choice of material and pattern. Chipboard or plywood is used in the kitchen and balcony, and linden, aspen or alder is used in the living room and bedroom. If desired, the panel can be made independently. The main thing is to observe the dimensions and rules for creating an image: transferring the finished drawing or cutting out the entire composition.

Wooden panel options (photo)

To begin with, my husband and I bought our first apartment in our life and began to gradually settle in it. Ecodesign inspires me a lot, but we live in a big metropolis, so I wanted to add a piece of nature to the new interior. The first thing that needed to be done for a more or less comfortable stay was to equip the kitchen. After scrolling through a lot of beautiful pictures, I really wanted to make a panel of wood cuts on the wall above the dining table.

Training

I re-read a bunch of sites on how to dry a tree at home, since no one uses fresh saw cuts - they crack badly and can become moldy. To be honest, there is very little information on the Internet on this subject, it is poorly verified, scarce and contradictory. Basically, all the advice boils down to the fact that you need to do this in a production environment. As a result, I chose and decided to try out the two most realistic methods for me: boil saw cuts in oil or in a very concentrated salt solution. I outlined the general procedure: file, dry, process, sand. So, vacation came, we went to the village, and I began to act.

Step 1

Pine trees mainly grow in our area - we used them. Everything is simple here: we saw saw cuts of different diameters and shapes by eye. Something was sawn with a hand saw (it turned out more accurately), something with an electric saw (so the saw cuts along the cut turned out to be very “wavy”). They adapted to cut medium and small diameters with a circular saw: it gave the best result - the saw cuts were very smooth and even - but did not “take” large diameters.

Step 2

Then I selected test cuts and boiled a couple of pieces in oil. I didn't get anything useful out of it. The oil was ordinary sunflower oil: they say you should use linseed oil, but it was not at hand. The saw cuts burned and turned black, but also dried up. The photo shows several ordinary cuts and one black, after oil treatment.

I had no choice but to cook saw cuts in salt. I took a large old vat and boiled saw cuts in a very concentrated salt solution in several batches. Cooked for a long time - from an hour to two, stirring occasionally. All resins rise to the top during boiling, in the form of a black film.

Be careful: one of my pans was damaged - its bottom was corroded by salt in the place of a small wormhole. So use ceramic dishes with a solid bottom or one that you don't mind. And keep a close eye on the process!

Some saw cuts crack badly during cooking, sometimes in half, but there are not many of them. In any case, make preparations in reserve - the marriage will be one way or another.

Step 3

When the cuts were still wet after cooking, I removed the bark - it becomes soft and can be perfectly removed with a knife. Then I laid the blanks on the fabric and dried for a long time (about a week or two) at room temperature for a long time, and then on a warm oven. As a result of this long process, the saw cuts really dried up, and all the resins and moisture were removed from them by salt.

Step 4

When all the blanks were made, I made an approximate version of the panel and selected the necessary ones for polishing. Sanding took 3 days. The husband removed the upper layers with a grinder, and then I brought the saw cuts to mind with a grinder installed in a vise. The work is very dusty, we did it in the garage and on the street. Then all saw cuts were treated with a special impregnation for wood from bacteria.

Saw before and after grinding.

Step 5

For the base of the panel, I used plywood. The sheet was taken of medium thickness: not too thin, so as not to lead, but not too thick, so as not to weigh down the structure. Then I painted the plywood in the same color as the wall where the structure will be attached. In addition, I decided to process the saw cuts again so that the dust does not settle on them so much. I didn’t want a varnish coating, so for the most natural effect I purchased natural water-based wax so that the tree “breathed”.

Step 6

I spread the waxed saw cuts on a sheet of plywood, and then glued them one at a time.

Step 7

We fixed the finished panel with self-tapping screws, above the dining table. We really liked the result. I hope you will appreciate it too, and my modest experience will help you if you want to do something similar.

Such products are gaining popularity every year, since it is with their help that you can create the most comfortable, elegant and original design. It is worth noting that if a wooden panel is made according to all technologies, then it can be safely purchased for any interior and regardless of the purpose of the room. For example, it can be hung in the hallway, living room and even in the bath. Modern designers often use exclusive carved wooden panels to decorate offices and halls.

Carved decor paintings made of wood are considered one of the most popular decorations for rooms. By carving a pattern on a wooden plate, craftsmen create the most beautiful three-dimensional images.

In order to make high-quality crafts, you will need to use only durable and noble wood species.

for example:

• Pine;
• Birch;
• Alder.

In the old days, such carved teak or pine paintings were made exclusively with their own hands, and they depicted only pictures from life, as well as images of animals and plants.

A good option is to paint a wooden panel using an ornate painting or a variety of ornaments that use rocks of different shades.

Often, amber and silver are used to decorate carved panels. It is worth noting that the creation of such a product as carved wood panels for a bath and at home is not just a hobby, but a whole art that requires skill, talent and, most importantly, the soul that is invested in work.

Wooden panel from a saw cut of a tree

If it is not possible to buy or create a carved wood panel, then you can choose wall paintings created on a saw cut of trees and branches as decor.

It is much easier and faster to create such paintings on your own, and for work you will need to use a sheet of plywood and frame in the form of wooden branches.

The sizes of such paintings can be very different, from the smallest to the largest.

It all depends on the taste and preference of the customer, or on his own wishes. For example, if it is possible, then it is quite realistic to make a carved panel clock that is suitable for both the hallway and the kitchen and will delight you with the fact that this is a hand-made product.

A panel from a cut tree in the interior of an apartment (video)

Carved wood panels in the interior

It is not so easy to work with wood and create a wide variety of products from it, as you need skills, artistic taste, the ability to correctly emphasize the side and texture of the material, and also create a real masterpiece from it. A carved panel is a picture with a finished image that can be brought into any house and room. Previously, it would seem too easy to use wooden paintings for the interior, but now they are so popular that they can be found even in the design of enterprises and companies.

Naturally, it is worth considering the fact that if carved panels are used in the design of the room, then the rest of the design should be appropriate.

Some of those who prefer to decorate their home with wooden products order a lot of paintings at once and the corresponding decoration of the house.

If you combine such interior items as a massive wooden table, paintings from carved panels and add all this with pleasant warm lighting, then this will be the most attractive solution for creating a beautiful composition.

Esotericists believe that the use of wood products, especially handmade, can create not just a living atmosphere, but fill it with positive energy, comfort and aura of creativity.

How is a carved wooden panel made?

The technology of making a carved wooden panel is not as simple as it seems, therefore, those who wish to immerse themselves in such an activity should fully study in order to avoid oversight.

What should be done:

1. Initially, it is worth choosing the necessary picture, according to which the layout will be created, or in other words, the image is detailed using the marquetry technique, in which it is necessary to mark each detail of the picture with its own specific shade.
2. After that, you need to pick up veneer and wood. Tracing paper, on which the sketch is applied, is fixed on the veneer, which will become the basis of the canvas with the selected composition.
3. The general background is created using details of various types and types of wood, on which the layout of the drawing is transferred.
4. With the help of a knife, you need to cut out every detail in order to exclude breakages, chips and notches, and the selection of veneer species is carried out according to the shades and corresponding details of the future picture.

It is worth noting that the details must be cut in size larger than they should actually be. After that, all the elements of the future panel are placed for firing in heated sand or salt, where they are saturated with color and its certain depth.

A selection of parts for the required dimensions is carried out, and each edge of the veneer is smeared with contact glue and a complete picture is assembled.

In order to make a three-dimensional carved image, you will need to use a special cutter, which is used on a finished wooden canvas. At the end of the work, the picture is covered with varnish or special wood paint.

How to decorate rooms with carved wood panels

A carved panel, as well as a three-dimensional picture made of wood or glued veneer, is a great way to create an individual style in the decor of a room. It can become a worthy picture in the living room or office, including in the bedroom, dining room and country houses.

Housewives who prefer to spend most of their time in the kitchen will be able to appreciate such elements as wood panels, as only with them you can achieve the very coziness and comfort. If you add carved wooden stools, benches or a huge round handmade family table on twisted legs to the room, then this will become the most attractive place in the house.

Modern carved wood panels allow even such banal rooms as baths to be made the most unusual and creative, as they cheer up and create a special atmosphere in which everyone will be pleased to be.

The panel for the bath is made of solid wood, and therefore they are not afraid of moisture and high temperatures.

3D wood panel (video)

A carved wood panel is a modern unique decoration that can be made to order and according to your preference. It is important to note that a wooden panel will last for many years and will please with its appearance for many generations of the family in which it will be purchased.

Examples of carved wood panels (photo in the interior)

Thai wood craftsmen create amazing products - teak panels. Carved panels are actually 3d paintings with many small details. They depict the life of people, local plants and animals or deities. Some masters create panels for several years, it also happens that one master starts work on a product, and another one finishes it. The layout of the finished carved panel is in the head of the master, and on the array prepared for carving there is only a schematic sketch of the future masterpiece.

By itself, teak wood is a rather soft material, which means it is easy to process, but over time it hardens, becomes stronger, practically does not react to humidity and temperature. The masters work with a hammer and the most ordinary chisels, but even such rough processing objects do not prevent the craftsmen from creating the finest carvings. Carved panels are always made from solid wood, as this directly affects the price of the product.

A wall panel is an opportunity to create an individual interior by decorating walls using available materials. If we talk about a panel as a product, then it is always an author's, handmade work, which has a rather high cost. Decorating an apartment with such fakes is not always relevant, because the product is selected according to the existing interior, and if repairs are made, then the panel becomes unnecessary, and it is a pity for the money spent. But it is a completely different matter when the panel is made independently. This makes it possible to choose the theme, size, texture, material, color, but at the same time the cost of money is minimal.

How to do?

In fact, there is nothing difficult in making a panel yourself, it does not require special skills and knowledge. The first thing you need is to choose a place where it will be placed, choose a thematic direction and prepare the necessary materials, which are most often found in any housewife.

A few important points

• If the room is small, do not use large panels, they will not look harmonious and make the room visually smaller.
• When the room is large and a bare wall is decorated, you can use a large panel or several small ones, but of the same theme.
• If the room is colorful and has a lot of decorative elements, the panels should be chosen in soothing colors, with a minimum combination of colors.
• When using several panels on one wall, it is necessary that they blend perfectly with each other, support one theme, or perfectly harmonize in color.

We make from improvised means

Materials that are suitable for making panels are, as a rule, what is at hand. You don’t need to specifically purchase anything, and the execution technique resembles handmade fakes that many did in schools.

Of course, the stores offer a variety of products where it is used:

• glass;
• ceramics;
• metal;
• photography is used.

But our panels, which we will learn to make today, have nothing to do with decorated tiles and photo wallpapers. Unless they have one goal - to make everything beautiful and unique.

You can use:

• threads;
• fabrics;
• buttons;
• ear cancer;
• flowers;
• leaves;
• cereals;
• coffee beans.

You can consider the features of thematic products.

Panel on the wall in the kitchen

This is perhaps the only place where the use of food for decoration purposes will be fully justified. Here are appropriate:

• cereals;
• grains;
• vegetables;
• fruits.

But, by the way, coffee beans are a versatile material and can be used in any room. They are easy to work with, and during operation they do not lose their appearance and color.

With their help, you can lay out any pictures, for example, a cup of coffee, which already withstands the theme. You can cut out photos of beautiful fruits and vegetables, complementing them with cereals.

Coffee beans are a versatile material

New Year's panel

In this case, the brighter the better. Such a picture should speak of a holiday, fun and good mood. Here it is permissible to combine any materials and surrender completely to fantasy. And if you were invited to visit, a hand-made panel will be a great gift.

Suitable use:

• spruce branches;
• cones;
• rowan berries.

As a background, you can use a New Year's picture, for example, printed on a printer and decorate it. Snow-white snow can replace crumbled polystyrene, cotton wool and even semolina.

Baby

If a girl is dancing, you can make a picture of a ballerina. Such work on a fake will definitely interest your child, so you can make a joint fake.

macrame panel

In the manufacture of such products, knowledge of weaving techniques is needed. If you made macrame, you can create an incredibly beautiful decor. The advantage of products is that everything will depend on desire and imagination. They may be:

• large;
• small;
• round;
• square.

You can decorate them:

• beads;
• stones;
• ribbons.

Material selection

Knowing about the main points, you can consider in more detail how to make panels using one or another material.

from wood

Additionally, you need wire, thin branches of wood, glue. For the frame, you can use wooden planks if you want a square or rectangular picture. For an oval or round frame, you can also use thick wire, and wrap it tightly with thread for decoration.

For the background, you can use plywood, white cardboard, burlap, or leave it blank. In the latter version, all elements are attached to each other and fixed to the frame.

Advice

In order for the tree to have a glossy surface, it is varnished.

Design ideas:

• You can place patches on the branches, which are attached with glue. So that the bottom does not look empty, you can fill it with the same blanks.
• A composition of patches laid out in the shape of a flower will look beautiful if this is a large product, you can use cones or dried flowers.
• It can be a lined heart or a star.

In order not to spoil the impression, it is better not to use synthetic materials in the composition.

From fabric

The fabric is easy to work with, and its variety allows you to create amazing paintings. With it, you can create:

• abstract drawings;
• sew animals;
• nature;
• create complete pictures.

Fabric is a material that is easy to work with

• Absolutely any fabric is suitable for work, the more different fabrics there are, the wider the choice when implementing ideas.
• You will need threads, frames, cardboard, elements.
• As in the previous version, the frame can be made independently. Panels without frames will look great.
• The basis on which the picture will be created, you can choose any thick cardboard, fiberboard or chipboard, plastic and other improvised materials. It needs to be covered with material, and secured from the wrong side with glue or a stapler.

Advice

Do not throw away small pieces of matter and shreds, they will be useful for the following work.

Ideas:

1 It can be nature, flowers, trees. To make a tree or flower look alive, you should use the following technique. The trunk or stem is drawn on the fabric and cut out, glued to the canvas. The leaves are also cut out, but only one side is glued to the canvas. For a flower, you can first create a composition with a needle and thread to fix, and then glue.

2 Now in many interiors panels are used when using one material, without any additional elements. The idea is as follows, for example, you have a living room, where two, three primary colors are used in the interior: beige, orange, red. You need to choose a material with a pattern, where red flowers are painted on a gentle background. Or take a fabric with a red background, on which there are small beige flowers.

It is ideal to choose three different fabric options. Next, the base is taken, a square or rectangular sheet of plywood and covered with fabric. Plywood sizes can be different, the main thing is that in the end they look harmonious.

3 Pictures look great, for this you need to choose a picture as an example. Then, cutting out the details, glue them to the base. This is a bit of a time consuming process and it's best to start with simple drawings.

Advice

To add volume under the fabric elements, you can put cotton wool.

From photos

The use of photographs for decorating apartments has been used for a long time and, probably, this technique is used in every family. And although it will not work to surprise with the material, it will definitely come out with the design method.

• For this method, absolutely all photos are suitable.
• Black and white photos look great.
• Additionally, you can use photos of nature, beautiful landscapes.

Design Ideas:

Framework. Depending on what panel is expected in the final result, you need to choose a frame. It can be made of cardboard, where only the front part of the frame is cut out of thick cardboard and glued on the photo, on density it can also be glued to the back, as a base. If the photos will be glued directly to the base, but the frame is not needed. You can use fabric for the front side of the photo as a frame.

The family tree looks very beautiful in the interior, it brings comfort and creates a special atmosphere. Making it is quite simple, for this you need a base, you can work with cardboard, the main thing is to find the dimensions. It can be dyed or wrapped with cloth. Then a tree trunk and branches are cut out of the same cardboard. It is covered with paint, if something does not work out, problem areas are easy to close. Then photos are attached.

You can place photos in a chaotic manner on the same basis, and decorate empty spaces with additional elements. To delimit the photo, you can use colored tape or a thick thread.

Another original option is to take a large frame and pull the threads horizontally. Then, using clothespins, attach the photo to them.

Advice

Photos of different sizes look beautiful, while geometry and accuracy should not be observed.

From paper

Paper is another convenient and affordable material that is easy to work with.

Paper is another convenient and affordable material that is easy to work with.

Design ideas:

Butterfly panels are widely used. For this, colored paper is taken, and butterflies are cut out according to approximately one sketch. You can use one color or several, in only one color palette, for example, from soft pink to burgundy. Then butterflies are glued onto the base (cardboard, plywood) or directly onto the wall. It can be in the shape of a heart, the lightest color from below and ascending to the top. It can be a flying composition. Only the body needs to be glued, the wings should lag behind the surface.

You can create an arrangement of flowers. Here it is better to use soft paper with cardboard will be difficult to handle. We take a square sheet of paper, it needs to be folded with an accordion. Next, the accordion is folded in half and these edges are fixed with glue or a stapler, the free ones are stretched and also fastened together. To make the edges of the flower come out curly, cut the folded paper with an accordion at both ends.

You can beautifully decorate with small beads, pebbles or beads.

Advice

If you have a panel of butterflies, they can be placed additionally around the room!

plaster

They can be called luxurious and elegant. Gypsum stucco has always been appreciated, and now there is an opportunity to make panels using gypsum on your own. Gypsum can be purchased at any store, as well as molds for future compositions. But if you work a little and spend time, then you can do it without forms.

• Masters who do this professionally use special devices. For home creation, you can use any means at hand, a pencil, a spatula. That is, those objects with which it will be convenient to apply the drawing.
• You should start with the simplest forms in order to get acquainted with the material.
• Difficult works of art are unlikely to come out, but having mastered the basics, you can produce beautiful drawings.

Design ideas:

• You can work with plaster directly on the wall, but then you need to have a perfectly flat surface.
• A little plaster should be applied so that it does not have time to dry. You can decorate flowers, patterns. If you draw well, you can make difficult compositions.
• The material itself is not bright, so you can decorate it with a bright frame and paints. In the latter case, do not overdo it so that the material does not resemble plasticine.

To create, you can use any means at hand - a pencil, a spatula

Advice

At the first stages, you can simply get acquainted with the material in order to know how it behaves in work.

From threads

With the help of ordinary threads and nails, you can make a panel that will make him admire. Such crafts belong to the art of string art and are popular all over the world. And they sell for a high price.

• As a basis, it is better to use wood or plywood.
• In addition to multi-colored threads, you will need nails or pins, nails with beautiful hats will look beautiful.
• A sketch of the future panel (drawing) is applied to paper. Then it is applied to the base and fixed. Nails are hammered along the contour of the drawing, the less they are hammered, the more voluminous the drawing will be.
• Then the paper is torn off.
• A thread is wound on the nails, horizontally and vertically.

Registration:

• Flowers and stars. It can be three large flowers or several small ones. Flowers will look beautiful when using different colors of threads.
• It can be a big heart, a cat, a dog or a bear. Even the simplest drawing will look original and unusual.
• You can make a drawing of several elements, then it will take patience and time.

Advice

When using thick threads, the consumption will be lower, and the work will be done faster.

From beads, buttons

Such panels can be safely called bright and original decorations. Beads are used in many fakes, thanks to the multi-colored palette and hardy material, incredible compositions can be realized.

• To create such fakes, you can use beads separately, combine them with buttons or with other materials.
• Can be used as a base fabric, polystyrene, wood, cardboard.
• The material is attached with glue.
• Before creating a pattern from beads, you need to draw a contour with a pencil, and fill in small areas. First, glue is applied with a brush, then covered with beads.

Ideas :

• It is better to start artistic fakes with simple drawings, for example, flowers, trees, animal themes. Try to make a butterfly, to do this, draw an outline and select areas where different colors will be used.
• If the drawing is large, you can use buttons, so the drawing will be completed faster, but will become no less beautiful.
• When there is artistic talent, you can draw a picture, and highlight some of its elements with beads.

Advice

It is better to hang a beaded panel on an empty wall so that it serves as a bright accent in the room.

From plaster, putty

Such work is similar to gypsum, but if gypsum is used in small areas, then plaster most often acts as a material for large panels. This is not to say that this type will easily give in to beginners in this matter, but with a little training, everything will definitely work out.

Since the panel is made directly on the wall, it is better to train on some smooth surface.

Work technology:

• The drawing is applied to a piece of paper, the following work is performed on this sketch;
• Then the drawing is transferred to the plaster;
• According to the drawing, a form is applied layer by layer;
• In order to smooth the sheet and not damage the shape, it is necessary to cover this area with a film and carefully correct, smooth;
• To give the surface texture, you can use a brush with a hard bristle;
• When the pattern has formed, it is necessary that it is completely dry;
• Then, using sandpaper, aligns the zones;
• You can paint the canvas.

The process is laborious and requires patience, but the result is worth it.

Cork

The only difficulty in creating such a panel is to find a sufficient number of traffic jams. If there are wine corks at home, then creating an original panel is not difficult. This material is easy to process, light and comfortable.

• They can serve as a background if cut into circles.
• Attached with glue.
• Works well with natural materials.

Design ideas:

• There are corks in both delicate beige tones and rich brown. If you cut different corks, you can use them to lay out a picture.
• Sliced ​​circles can be applied with letters of paint, from which the phrase is composed.
• From them you can cut out figures that are further fixed to the base.

From discs

With the advent of flash drives, disks have faded into the background. Probably, in every family there are these computer accessories. It is very good that they have been preserved, because there are many ideas on how to make unique, luxurious panels out of them.

Design ideas:

For families with children, it will be relevant to make "Smeshariki", cartoon characters. For this, details are cut out of colored paper or fabric (nose, eyes). Then, with the help of glue, they are glued to the disk. Heroes are applied to the base, which can be made of cardboard or thick fabric.

• The disks are well cut into different parts, which makes it possible to decorate panels with their help. In the light they shimmer and shine.
• Another option is to cover the disc with paint, you can choose any background that will fit the interior. When the paint dries, a pattern is applied with a pencil. Next, along the contour of the drawing, a layer of paint is removed with a knife.
• You can use a floppy disk as the basis of the panel. To do this, it can be decorated with paint or wrapped with thread.

From shells

If the family likes to relax on the sea coast, the obligatory souvenirs are shells. Kids love to collect them and replenish household supplies. But very rarely they are used, so from year to year they lie and wait for their time. Now the time has come when they can serve as the main element of a beautiful panel.

• Before using shells, they must be washed and dried well.
• To apply them to the base, you need glue.
• Before work, for convenience, it is better to sort them by size.
• To diversify the pattern, you can additionally use sand, pebbles, beads.
• Colors can be added with paints.
• To make the surface of the shell glossy and shiny, it can be coated with colorless nail polish.

Ideas:

• It can be a flower lined with shells or a chaotic arrangement. Much depends on where the panel will be placed. It is necessary to withstand the marine theme or create an overall picture.
• Such elements on burlap will look beautiful, and simple branches tied with a thread can serve as a frame.
• You can take a drawing of a marine theme as a background and decorate it with shells.
• To create volume, shells are attached to the sidewall.

As you can see, any thing can be used. Here are some more examples of how to beautifully decorate a wall.

Decoupage panels

This option can be considered an update of old things. In this case, any canvas is taken as the basis. Old painting, wooden planks, iron or glass elements. With the help of paints, beads, threads and other materials, the base is decorated.

Most often, products do not require a frame. They are hung on a rope or simply on a hook. For decoration, it is better to use natural materials. It can be several pictures that are interconnected.

As a frame, you can use designed for photos or paintings. You can do it yourself if there are thin strips. For the background, fabric is most often used, which is covered with a base. Since the doll has a certain weight, the base must be reliable - wood or plywood.

As additional materials, you can use:

• tapes;
• bows;
• beads;
• buttons.

If you have time and desire, you can make dolls that resemble family members and create a family panel.

Clock

Now you can buy any wall clock. They come in different shapes and sizes, colors and textures. But finding a unique model is unlikely to work, making it yourself is much easier. Such panels are convenient in that you can choose all the parameters yourself. The only thing to consider is the general rules for all products.

Topics can be completely different:

• time of the year;
• nature;
• romance;
• flowers;
• abstraction;
• patterns.

All that is required for the job is the selection of appropriate materials and a base. The basis can be foam, wood or plywood. First of all, it needs to be prepared. You can decorate with paint or covered fabric. If it is supposed to use multi-colored elements, then the basis should be chosen monophonic.

It is not necessary that the clock be located in the center. On the contrary, if they are located on the edge, this will greatly expand the possibilities and it will be possible to create a beautiful composition. Here you can use all the techniques presented above. If the watch has a three-dimensional glass and it looks rough in the overall picture, it should be removed.

As a rule, watches have their own background, if they have already been purchased and the background does not fit the overall interior, this problem is easy to solve. The clock is easy to disassemble, the main thing is not to damage the mechanism. The withdrawn base can be painted or decorated with beads. You can use pieces of a floppy disk that shimmer beautifully in the light.

With pockets

Such a panel will not only bring beauty, but also benefit. It is suitable for kitchen, bathroom, nursery. Its main advantage is pockets in which you can put any accessories. You can make different sizes and shapes, and use as many pockets as you see fit.

Such a panel consists of a base to which pockets are sewn. A bar is attached from above, it is better to use a wooden one. Depending on what accessories will be stored in the pockets, the basis is selected. The heavier they are, the stronger the foundation should be. Plywood is perfect, it does not deform, and it will keep the shape of the panel perfectly.

Regarding the fabric, there are no special frames, but it is also better to use a dense fabric. Pockets can be of different sizes, and placed randomly. You can use pieces of different fabrics, even if they differ in density.

Such panels are made from the pockets of old jeans and pants, which looks very original. Such a product will perfectly complement the interior of the corridor.

You can decorate:

• ribbons;
• bows;
• buttons;
• stones.

If colored material is used, then its pattern is quite enough.

You should never give up, because the first successful work will bring positive emotions and pride in the work done.

Topic disclosure

Reliability of information

• Availability
• Saving money
• The uniqueness of the design

• Time for crafts
• Sometimes hard to find materials
• Often, after an unsuccessful first attempt, work is suspended