Floor covering art vinyl. Reviews about the flooring Art vinyl tarket TARKETT

In the domestic market finishing materials floor coverings are presented in a very wide range. Nevertheless, almost every year new, more advanced materials appear that attract the attention of specialists and ordinary buyers.

More recently, consultants to major construction stores began to offer their customers artvinyl for the floor. What it is? According to the manufacturer (Tarkett company), this is a unique material that can be compared with ceramic tiles or parquet in terms of assembly technology. A variety of colors and shapes of tiles allow you to create on the floor the design you have dreamed of.

Artvinil for the floor - what is it?

This is a multilayer material, which consists of:

Fiberglass, responsible for the safety of dimensional indicators. Artvinyl tile does not narrow and does not stretch under the influence of different loads.

Calendered layers (usually two). They protect the tiles and ensure the resistance of the material to stress. On the floor of this material there are no traces of heels, furniture.

The decorative layer creates appearance coatings.

Embossed transparent layer creates on outside relief tiles, emphasizing naturalness. This layer provides the strength of the material to a greater extent.

Lacquer (Extreme Protection brand) developed by Tarkett. It has a high level of wear resistance, which is 7 times higher than that of similar materials.

Material advantages

Artvinyl for the floor has high quality characteristics. It is durable, moisture and wear-resistant, perfectly tolerates temperature changes. All these indicators are very important when it comes to choosing a floor covering. In this case, other parameters must also be taken into account.

Artvinyl for the floor has a beautiful appearance that imitates natural materials. Designers use it to implement the most daring ideas on the floor. For example, connect to harmonious composition oak and marble, beech and slate. There are many options for this topic. Tiles or planks are assembled in different ways - parquet, herringbone, in the form brickwork etc. The manufacturer offers its customers 10 styling schemes. They are described in detail in the instructions attached to the material.

It is natural that buyers are interested in how the installation is done. Artvinyl for the floor is mounted quite simply. We will talk about this a little later.

The advantages of the material include ease of transportation, practicality of the material. In addition, this coating has long term operation. The manufacturer, Tarkett, guarantees 15 years of impeccable service life of the material, without changing the appearance and technical characteristics. It should be noted the environmental friendliness of the coating, which confirms the certificate "Leaf of Life". Therefore, such a floor can be laid even in a children's room.

Many consumers have already used artvinyl for flooring. What it is, they know firsthand. Often this modern coating compared with other materials. For example, its layering and practicality are very reminiscent of good, high-quality linoleum, beauty and elegance bring it closer to piece parquet. But there are also significant differences:

Artvinyl tiles, unlike linoleum, are able to diversify the floor pattern, since these are modules that have different design, not rolled material;

Unlike parquet, it can be used on the "warm floor" system;

The coating is very pleasant to the touch, you can walk barefoot on it with pleasure, which cannot be said about tiles.

disadvantages

As you can see, there are many advantages new material- artvinyl for the floor. Its price is equal to the cost of the laminate. It varies from 665 to 1600 rubles per square meter. Some buyers consider this a disadvantage. Although not everyone agrees with this.

Artvinil for the floor: do-it-yourself installation instructions

As we mentioned earlier, laying this coating will not be too difficult even for a person far from construction. However, it should be borne in mind that when working with this material, accuracy and attention are required. A careless attitude to work will certainly lead to errors that will affect the quality of the coating.

Laying technology

Any finishing process is divided into several stages. Flooring is no exception.

Mandatory surface preparation requires artvinyl for the floor. Laying technology involves the implementation of this stage in the first place. The final result largely depends on the quality of this work.

Surface preparation

It should be noted on which surfaces this coating cannot be laid. These are plywood, chipboard, linoleum, fiberboard, In other words, on those surfaces that will begin to deform over time under the influence of various loads. Consequently, the tile itself is also subjected to deformation, and this should not be allowed.

The ideal basis for artvinyl is a solid concrete floor, filled with a screed. But remember that in this case it does not fit. It is better to use bulk self-leveling floors.

The modern construction market offers big choice dry mixes for these purposes from different manufacturers. These are cement gypsum or polymer compositions. It is better to give preference to the latter. Such a surface has a small thickness, but at the same time an ideal surface, characterized by high strength.

After pouring the screed, it needs to dry well. Then the floor surface must be thoroughly cleaned of dust. A regular vacuum cleaner will help you with this. Close all windows before cleaning to prevent drafts.

Now you can start priming. It is better to use a two-component material based on polyurethane. It will increase the adhesion coefficient and strengthen upper layer.

markup

We remind you once again that accuracy is necessary when you lay artvinyl for the floor. Laying technology involves another mandatory step, which for some reason is neglected by many home craftsmen. It's about about markup. Not only quality, but also simplicity, ease of installation depends on it. For example, a well-marked scheme in a room of 40 square meters can be covered with tiles in one and a half to two hours.

First you need to determine the center of the room. To do this, apply diagonals - their intersection will be the point you need. Draw two perpendicular lines through the center. They will divide the room into 4 rectangles.

It is necessary to start laying tiles from the center, gradually filling all areas with it. This is a straight line. If you want to carry out a diagonal assembly, then the markup will need to be carried out with additional lines - from the center at an angle of 45 degrees to the previously drawn lines.

The final stage - installation

For the installation of artvinyl tiles, it is applied in an even layer on the base of the floor with a notched trowel. Please note that the adhesive is strictly certain time during which you can work with it. Typically, this is one hour. Therefore, the mortar should be applied to an area that you can tile in this time. If you did not meet the allotted time, then the glue should be removed and a new layer applied.

After applying the adhesive composition, do not start work immediately. Let it sit for 8-10 minutes. After that, you can lay the tiles. On the back of each module, you will see an arrow that shows which way to assemble. This greatly facilitates the process, regardless of the selected floor pattern.

Each element of the coating is installed on a surface previously smeared with glue and pressed by hand. You can roll it around the edges with a roller. Such movements are made from the center to the edges of the panel. Tiles are laid tightly to each other, without gaps. This will not allow them to move during operation under the influence of loads. Experts advise re-rolling the new floor after 10-15 minutes to be sure that the tile is pressed well enough and its edges will not wrap after a while.

Art-vinyl panels along the edges of the room near the walls do not always fit in their entirety. Therefore, they must be cut. It's pretty easy to make with a sharp knife. Consider these subtleties:

Trimming is carried out only on the front side of the coating;

Accurate marking must be carried out, without allowances and tolerances;

An incision with a knife at the marking site is made strictly along the intended line.

Bend the tile at the incision and cut it completely with a knife.

During installation, the adhesive, when pressed on the tile, may protrude beyond its limits and leave a mark on its surface. This must be avoided. But if this still happened, immediately remove it with a napkin, which is best moistened with alcohol.

Well, you have laid artvinyl for the floor. What it is, you now know how to lay it - too. It remains to learn how to care for such a floor.

After all the tiles have been laid, it is necessary to carry out the floor. This can be done only after three days, when the coating is completely glued to the base. After that, the floors can be washed with water with the addition of products that are intended for PVC products.

Anyone who appreciates beauty and comfort, practicality and reliability is looking for the appropriate flooring, the technical characteristics of which would correspond to these parameters. Not so long ago, a product appeared on the market of finishing materials that can help in creating individual interiors. Art vinyl - a new generation of flooring - fell in love and experienced designers, and ordinary consumers who prefer to carry out repairs on their own. Its popularity is growing rapidly. What is it caused by? Let's figure it out.

What is art vinyl?

Art vinyl is a product that combines the virtues of three floor coverings: the beauty of parquet, the usability of linoleum and modularity. ceramic tiles.

Externally, the material is able to imitate any surface. The design is practically unlimited. There are also natural textures. natural materials, and a huge color palette. Therefore, with the help of vinyl, you can create unique individual interiors, combine marble and wood, slate and oak in one space, lay out a classic “herringbone” or assemble palace parquet.

The special texture of the material creates a moisture-resistant coating that is not afraid of temperature changes. Patented manufacturing technology ensures reliable durability, unique protective layer and ease of care. The service life of a vinyl coating is 15 years, but with proper installation and proper operation, it can increase significantly.

Material structure

The texture that vinyl flooring has is like a layered cake. It consists of the following layers:

The base is made from durable vinyl. The strength of the modules, their wear resistance, the presence of heat and sound insulation properties depend on its thickness.
Fiberglass is placed on top of the base. He is responsible for the geometric stability of the tiles.
On the fiberglass lies the basis for the decor.
Next comes the drawing.
It is covered with a transparent transparent - a protective layer that prevents the pattern from wearing out. The thickness of the transporter is 0.4 mm. The same figure for semi-commercial linoleum.
Finishing layer - patented polyurethane film. It aligns the transponder and protects the module from the penetration of dirt, which due to this cannot seep into the depth of the structure.

Existing benefits

The price of art vinyl is comparable to the cost of a laminate, but at the same time, the described material has a large list of advantageous characteristics:

First, vinyl flooring is much stronger than laminate flooring. Thanks to the multi-layering and the use of several vinyl protective layers, it is possible to create a versatile flooring with high durability. In terms of wear resistance, modular vinyl can be compared with semi-commercial linoleum. Therefore, they have the same warranty period.
Secondly, vinyl tile has good moisture resistance. It does not care about dirt or water, so it can be safely used in rooms with high traffic. Its use is advisable in spas, bath complexes and large halls, which are used as a vestibule between the living space and the street side.

Not so long ago, only ceramic tiles were laid out in such rooms. But she has one major drawback. When water gets on a tiled floor, it becomes slippery. The vinyl surface never slips, which means it is less traumatic.

Thirdly, modular vinyl collections boast a huge variety. color solutions which gives you unlimited design possibilities.

Among positive characteristics You can also note the modularity of vinyl. This makes the installation process easier and less labor intensive. Ease of use is the most important requirement for modern materials. Vinyl fits perfectly.

Another important advantage of the described floor covering is its fire resistance. Vinyl has moderate smoke production and moderately hazardous toxicity when burned.

Styling features

Art tile floor tiles

Like any other coating, vinyl tile can only be laid on a perfectly flat base. So preparatory stage installation is not much different from preliminary stage laying laminate, linoleum or carpet. The floor surface is cleaned of old finish, repaired and filled with self-leveling compounds.

The thickness of the screed is determined after the detection of existing height differences. If they are insignificant - up to 2 cm, then it is better to make self-leveling floors. Special cement levelers will help eliminate differences from 2 to 5 cm. If the height difference is from 5 to 7 cm, then gypsum materials are used.

Note! There are already ready mixes on sale. Choose those that contain polymer additives. They improve the quality of grip and allow you to create a smooth surface like a skating rink.

After the screed has dried well, the floor must be swept or vacuumed. Next, a well-cleaned surface is primed. For concrete floors, a conventional water-soluble primer is selected. But for polymer bases the best choice will be polyurethane impregnation. The primer holds the top layer together and improves adhesion, which is necessary for better adhesion of the adhesive to the floor surface.

The floor must be dry before starting to install the modules. The moisture content of the substrate must not exceed 5%. You can check it without resorting to measuring equipment. Just lay on the floor polyethylene film in the form of a square meter by meter.

Ensure the tightness of the edges - take the rail and press it with a weight. Leave the greenhouse for a week. If condensation forms inside, it means that the screed is not ready for further finishing work - its humidity is quite high. You can continue to work only in the complete absence of dew.

Stacking modules

Prefabricated floor covering

As a rule, manufacturers producing vinyl modules attach design albums to their collections, which indicate the layout scheme individual elements. Only those who are confident in their artistic taste can create their own design. But experts warn that this process can cause certain difficulties during installation. Therefore, it is much easier for a simple layman to work with a ready-made recommended scheme attached to a particular vinyl collection.

Note! The required amount of material is calculated according to the finished scheme. But you need to buy material with a margin for cutting. When buying, study the serial number of the package, as the art vinyl used for decorating the floor in one room must be from the same lot. This will avoid discrepancies in color.

After packing this material will be brought into the apartment, there is no need to rush to unpack it, especially in winter. Let the modules lie down for a day indoors and accept room temperature. Before installation, certain conditions must be created in the room:

Eliminate the possibility of drafts. They should not be not only during laying, but also in the first days of operation of the new floor.
Both gluing and waiting for the glue to dry is possible only at a temperature of +18 degrees Celsius. That is, for all 72 hours (this is how much it takes for the glue to dry), the room must be slightly heated if the laying does not take place in the summer.
Air humidity - no more than 60%.

The adhesive used is a water-soluble acrylic adhesive. It is also better to buy it with a small margin, since it is difficult for a beginner to immediately learn how to withstand the glue consumption rate. Before starting work, all the necessary tools are collected in one place:

Medium size square.
Joiner's pencil.
Marking cord.
Roulette, the canvas of which exceeds the width of the room.
Notched trowel.
Cork tree roller.
Trapezoidal knife with a set of spare blades.

Mounting algorithm

Vinyl floor coverings

When the floor is completely dry, and the tool is assembled, you can proceed to the most important processes. How to install vinyl? What to pay attention to? What should not be done?

Vinyl modules are laid in exactly the same way as ceramic tiles:

First, the center of the room is determined. Two axial perpendicular lines that connect the midpoints of opposite walls help to identify it. Self-tapping screws are driven into the floor. A cord is pulled over them. With it, marks are left, which are then connected with a ruler and a pencil. With proper marking, two perpendicular lines should intersect at a right angle. A square will help control this.
For a normal layout, this markup will be enough. But if you need to perform diagonal laying of the pattern, then you will have to supplement the markup with bisectors that will divide the right angle exactly in half.

Note! Connect the corner of the room to the center right angle it is forbidden. Square rooms – a rarity, therefore it is better to trust the construction protractor.

Further, according to the instructions, an acrylic adhesive composition is prepared and applied to the floor. The instructions on the packaging describe in detail how to work with glue. Usually, after applying to the floor, it dries a little within 8-10 minutes, coming into its own. working condition. And only then you can stack modules on it. The properties of the adhesive applied to the surface are retained for the first hour. Knowing this, it is easy to calculate the area of application.

The diluted composition of the adhesive is simply poured onto the floor and spread over the surface with a notched trowel without strong pressure. It is necessary to try not to leave puddles, therefore, with a spatula, wide arched movements “toward yourself” are performed.

Modules are stacked from the center of the room. The first element is located according to the figure. The subsequent ones are mounted tightly to each other, while the presence of gaps is unacceptable. The laying process moves from the center to the opposite wall from the exit if a regular pattern is selected, and towards the far corner if a diagonal laying is selected.

Note! On the back side tiles have pointing arrows that will help you navigate the existing scheme.

The tile is simply laid on the adhesive and lightly smoothed by hand from the center to the corners. It is possible to pass with a cork roller only along the laid finished canvas.

Note! If an hour has passed after applying the adhesive to the floor surface, and the tile has not been laid, the dried adhesive is completely removed and a new layer is applied.

Trapezoidal knife for vinyl flooring

You need to cut the tiles with a trapezoidal knife. Such an operation is performed in the following sequence - marking and the first cut is made along the front side. The tile is cut to a third of the depth, then the cut is slightly bent and only then completed.

Excess adhesive smeared on the surface is removed only after finishing the entire floor surface. The easiest way to do this is with a cotton swab dipped in alcohol solution. Use of chlorine or abrasive chemicals not allowed. The floor dries for three days, after which it is possible to carry out general cleaning.

Generalization on the topic

Art vinyl is a new generation product that combines positive traits wooden parquet, ceramic tiles and practical linoleum. It is made from polyvinyl chloride by hot pressing. The composition, in addition to the polymer, includes stabilizers, plasticizers and quartz sand.

Thanks to this composition, the material is versatile and practical. Art vinyl is used for interior flooring high humidity, as well as in commercial premises with high foot traffic.

Semyon Knyazev

New floor coverings appearing on construction market with enviable regularity, do not cease to amaze consumers. Meet! Art Vinyl enters the global arena of floor innovation - PVC tiles with unusual properties. The inventor of this innovation was the company Tarkett (Russia), which is famous for creative approach and striving for new opportunities. Art Vinyl flooring is just that, because it combines the advantages of laminate, linoleum and ceramic tiles.

In its invention, Tarkett has relied on a design that can satisfy the tastes of any consumer. Art Vinyl coating is an excellent "chameleon", which is able to convey the color and texture of any other floor covering: wood, natural stone, ceramics, plastic.

Art Vinyl coating fully conveys the texture and color of natural parquet

All this variety is available in two forms: in the form of rectangular planks and square tiles. Laying technology allows you to combine these two modular forms in any way in one coating, creating unique combinations. At the same time, in order to achieve an original effect, you may not have a designer flair, but use existing, standard styling options. There are not so few of them already - as many as 10 pieces! All of them are described in the instructions that are attached to each pack of Art Vinyl products. It will not be difficult to deal with the schemes, as well as to lay the Artvinil floor covering on your own.

Substrate preparation for flooring

Planks and tiles Art Vinyl is plastic and enough thin coating, the thickness of which does not exceed 3 mm. Accordingly, when laying it on an uneven surface, you will be disappointed: all the flaws will clearly appear on the vinyl coating and become clearly visible. Therefore, the manufacturer warns not in vain: Art Vinyl should be laid only on a perfectly even, specially prepared base.

It is strictly forbidden to lay tiles (slats) Art Vinyl on linoleum, wooden floor, plywood, chipboard or fiberboard. All these surfaces are more or less subject to deformation from moisture or mechanical stress, so the PVC coating will not adhere to them.

The best foundation is strong concrete floors, leveled with a screed. Moreover, this screed should be perfectly even, which means that the usual cement mortar not suitable for these purposes. Take advantage of modern . They can be cement, plaster or polymer. The last option is the most worthy. allow you to create thinnest layer flat and smooth as glass surface.

If you decide to use a used screed as a base, then this is also quite realistic. The main thing is to completely clean it from the remnants of paints, putties, dirt. All defects found, even small cracks and shells, must be cleaned and puttied. Bulges - sand flush with the main surface. It is advisable, for complete confidence in the quality result, to putty the entire floor with a finishing putty, and then, after drying -. The same action should be carried out for fresh, specially poured for Art Vinyl, screeds.

At the last stage preparatory work it is necessary to remove dust and apply a primer to the base. Sweep away all the dust with a broom, and then walk with a vacuum cleaner. Ventilate the room so that dust particles do not float in the air. For priming polymer screeds, give preference to two-component polyurethane impregnations, and for concrete floors - water-soluble. The primer will provide a stronger adhesion of the adhesive to the screed and additionally fasten the top layer of the base. Accordingly, and increase the durability of the vinyl coating.

Laying Art Vinyl can only be started after the base has dried to 5% humidity, otherwise the coating will warp and peel off. Direct laying is a very simple process and even a layman can do it in a matter of hours. Judge for yourself: a floor with an area of 40 m 2 can acquire a new, “vinyl” life in just 1.5 hours.

Surface marking features

Laying any modular coatings requires high-quality floor markings. First of all, center lines are drawn on the floor, at the intersection of which is the center of the room. To do this, on one wall with the help of a tape measure, the middle is marked and a guide is drawn from it to the other wall. Then the center is found on this axis and a line is drawn at an angle of 90 °, perpendicular to the other two opposite walls. Thus, the room is divided into 4 parts. Fixation of vinyl modules will start from the center center line, according to the selected laying pattern. In the event that the drawing provides for a diagonal layout method, bisectors are drawn between the axial perpendicular lines, which should also intersect with each other at an angle of 90 °.

Regular and diagonal ways tile layouts Art Vinyl

Application of "acrylic adhesion" and laying of elements

Acrylic adhesive is used as a fixing composition for PVC coatings. It is applied with a notched trowel, spreading evenly over a small surface area in arcuate movements. In order for the adhesive to acquire the desired properties, it is usually dried for 8-10 minutes, and only after that they begin to lay the tiles. The acrylic adhesive retains its working condition for about an hour, after which it is no longer able to hold anything. If this time has elapsed, and you did not have time to lay the Art Vinyl flooring, the unused adhesive must be completely removed from the base, and a fresh one should be laid in its place.

Applying glue to the base to fix the elements of the coating

It is necessary to lay out Art Vinyl modules from the center of the room, gradually moving to the periphery, taking into account the selected pattern. On the back side of the tiles, arrows indicate the laying directions - they must be followed when building the correct floor pattern. Laying is carried out in the direction away from you, moving along the already finished coating.

Each element of the coating is laid on a base smeared with glue and pressed tightly against it, ironing the tile from the center to the edges. The tiles are placed without gaps and seams, that is, close to each other, so that even a minimal displacement is impossible. It is desirable after 10-15 minutes to re-smooth the edges of the already glued modules in order to finally fix them and prevent the edges from picking up.

Laying a modular base is impossible without trimming the elements. This also applies to Art Vinyl PVC tiles. If trimming is necessary, fix the module on the base with the front side up, mark the place of the cut and make an incision with a trapezoidal knife. Then bend the material along the line and finally cut it.

After installation, immediately remove any adhesive residue that may have remained on the surface. The easiest way to do this is with a cloth soaked in alcohol.

Caring for the coating Art Vinyl excludes the use of abrasives, solvents, household detergents. Wet cleaning can only be done special formulations for PVC coverings

The final cleaning will have to start only after the adhesive holding the Art Vinyl is completely dry. Usually this is about three days, after which you need to spend wet cleaning using any detergent to care for PVC coated. You can use the same tool regularly - for daily wet cleaning.

Among great variety materials for flooring, there are those that can be amazing combination several types of finishes. Art vinyl is one of the newest flooring options. The material is easy to install, interesting in appearance and it is possible to assemble a very durable and high-quality coating from it.

Art vinyl is a unique material that allows you to create interesting interior, easily combining a variety of textures and shapes in space. The beautiful appearance of parquet, modularity, strength and practicality of ordinary linoleum - these are three advantages various types flooring, which we managed to combine in one art vinyl.

On a note! Art-vinyl coating was created by specialists from Tarkett, a world-famous company. It develops and manufactures various materials for flooring for over 150 years. Now art vinyl is represented by two types - New age and Lounge.

The material is modules that have the shape of a square measuring 45.7x45.7 cm or a rectangle with sides of 91.4 and 15.2 mm. The first are packed in 10 pcs. in a pack, and the second - 15 each.

On a note! Art-vinyl modules are designed in such a way that both types can be combined with each other during installation - rectangular ones can easily be connected to square ones and vice versa. There are about 10 possible ways stacking modules.

Art-vinyl coating is able to imitate the most different variants floor finishes. This is marble, and wood, and slate. There are no restrictions on the use of material in the premises. At the same time, the coating will be very durable, not afraid of water, easy to clean. The service life of such material in the case of proper styling and proper care range from 15 to 25 years.

Art vinyl structure

One module of art vinyl floor covering consists of a certain number of layers - this is a multi-layer material. The base is made of vinyl and can have a different thickness, which determines the strength / performance characteristics of the material, including the ability to sound and heat insulation.

The base of the art-vinyl modules is covered with fiberglass, which provides the tile with geometric stability - the material does not stretch and does not change shape, all its fibers are located in different directions, which ensures the strength of the layer. And on top of it is the basis for the decorative layer, which is thin film with the selected pattern.

The pattern itself is covered by a special protective relief layer - a transporent - about 0.4 mm thick. It provides protection against scraping the pattern. On the surface of all this "pie" there is a finishing layer - a film based on polyurethane, which allows you to make the transporter smooth and protect the material from dirt that is not able to penetrate into the coating. The film is called Extreme Protection and does not need any special care. By the way, this layer was developed directly by Tarkett. It is 7 times more reliable and stronger than a conventional varnish layer.

Table. Specifications art vinyl.

art vinyl flooring

Art Vinyl - flooring

What rooms are suitable for

Art vinyl flooring can be laid in almost any area of the housing stock. But most often the material is used in the kitchen and bathroom - it owes this to its water resistance and strength. Even high performance moisture is not terrible material.

On a note! Art vinyl looks great in living rooms. It is easily cleaned of contaminants, and therefore it is easy to keep clean and can be laid in the corridor.

Art vinyl also looks good in offices or private sector homes. With careful operation, the terms declared by the manufacturer, it will serve unambiguously.

What is special about art vinyl?

The coating also has a unique feature that other types of coatings cannot boast of. The fact is that this is the only material that will make it easy to combine coatings with imitation of both wood and stone in one room.

It is also the only type of flooring that combines the positive properties of other materials. Art vinyl modules different sizes easy to combine with each other, and other types of materials for the floor surface cannot boast of this.

On a note! Art vinyl can also be installed in a child's room.

Advantages and disadvantages

Art vinyl, like any other coating, has its advantages and disadvantages. But still, this material has much more pluses than minuses.

Below are the advantages of art vinyl.

Art vinyl flooring is not without flaws. And before you buy given type material for finishing floors, it is important to learn about them, so that later you will not regret the money spent.

Art vinyl does not “like” tea and coffee - if these drinks get on it and are not removed, then stains form on the surface. Also, do not use substances with chlorine to clean the surface.
Sharp objects will easily leave scratches and damage on art vinyl. Therefore, it is impossible to run on the floor in high heels, drag furniture.
For some, art vinyl can cause allergies. It arises from the substances that the material releases into the environment.
Heating of the material can only be carried out up to +27 degrees - caution and attention are required during use.
When making modules natural materials do not apply.

Laying art vinyl flooring

Despite the fact that the manufacturer claims that art vinyl can be laid on any flat surface, the material should, if possible, lie on an ideal base. Thus, before starting the installation of the coating, a number of preparatory work is carried out, which often includes the removal of the old coating, as well as the leveling of the floors with special building mixtures or pouring a new screed.

Advice! For pouring floors, it is best to purchase and use those mixtures that contain polymer components. In this case, the surface quality will be higher.

To install art vinyl you will need:

roulette;
pencil;
ruler-gon;
dolphin knife;
spatula with teeth for adhesive solution;
lapping board;
acrylic adhesive.

The instructions for laying art vinyl on the floor are as follows.

Step 1. The surface of the screed is leveled with special compounds.

Attention! During the laying of art vinyl coating, the humidity in the room should be no more than 60%, the air temperature should be above +15 degrees, the humidity of the screed should be no more than 5%. Also, art vinyl of one series is laid out inside one room.

Step 2 Packages with art vinyl must be kept indoors for about 48 hours, provided that they were transported at temperatures below +10 degrees.

Step 3 The base of the floor is cleared of debris.

Step 4 A primer is applied to the entire surface of the base.

Step 5 If necessary, the final grinding of the surface is carried out and again - the removal of debris and dust.

Step 6 The floor surface is divided into 4 equal parts through the center, along the axes.

Advice! To find the center of the room, an axis line is drawn from the center of the long wall of the room at an angle of 90 degrees to the opposite wall. After that, the middle of the drawn line is marked, through which another center line is drawn at an angle of 90 degrees to other walls.

Step 7 Laying art vinyl is made from the center of the room in the sector that is most distant from the exit from the room.

Step 8 The adhesive is applied to the floor surface over the entire area of the sector with a notched trowel. Average consumption - 250-350 g / m 2.

Attention! If the floor area is large, then the adhesive must be applied taking into account its drying speed. In case the glue has dried and the art vinyl has not been laid, the composition is completely removed from the base and applied again.

Step 9 When laying art vinyl, attention is drawn to the direction of the tile pattern. It is indicated by arrows on the back of them. Laying of planks will be carried out according to the chosen scheme in the direction from the person performing the work. The modules will also be laid from the master. All modules fit without gaps.

Step 10 If necessary, the strips can be trimmed, while the markings are applied from the front side. The front side is cut according to the markup, the module is bent, cut through completely.

Step 11 After laying, each element of art vinyl is rolled. Then the art vinyl is left alone until the glue dries - this is about two days.

Video - Art vinyl. Laying

Cost and quality

Art vinyl - a coating that is not much more expensive good laminate. The cost of one square meter this material - about 400-550 rubles. However, this material is in any case cheaper than parquet or marble. And if you divide all the costs by the period during which the art vinyl floor will delight the owners with its beauty, then the amount will be quite acceptable, even if you cover the entire apartment with this coating.

Tarkett Art Vinyl Prices

art vinyl Tarkett

Attention! Immediately after laying, art vinyl may begin to smell unpleasant and characteristic, however, all aromas will quickly disappear. Unfortunately, the cause of the smell is a poor-quality adhesive composition.

Features of care

Art vinyl, like any other coating, needs care. A few tips will help keep it in good condition for a long time.

On the this moment On the market building materials there are no analogues of Tarkett art vinyl coating. This type of finish is becoming more and more popular every year due to its unique properties. It is especially attractive because it allows you to realize very interesting and unusual design solutions.

Video — Tarkett ART VINYL NEW AGE

The basis of a tile is made of polyvinylchloride, and has a two-layer design. mineral fillers significantly increase the strength and impact resistance of the coating. It is this layer that gives the tile properties such as rigidity, sound and heat protection.

Next comes a fiberglass canvas, the individual fibers of which are arranged in different directions. It is completely inelastic, so linear dimensions do not change during operation. The decorative layer is a flexible polymer film with a printed pattern. This is one of the main "chips" of the Tarkett company, the quality of the paint and the design are excellent. high level, "Art Vinyl" coating does not fade and looks new for many years.

Finally, two protective layers complete the construction. The first "transparency" with a thickness of 0.4 mm performs the function of protecting against abrasion, it also gives impact resistance and elasticity. The final layer has maximum resistance to scratches, it is easy to wash and clean from dirt. At the same time, the Art Vinyl coating can be both glossy and rough to the touch.

Advantages coverings "Art Vinyl"

Moisture resistance. The absence of layers of wood or paper makes it possible to lay tiles in any room, including on terraces or in the bathroom.

Lots of styling options. The floor "Art Vinyl" is produced in the form of square tiles with a side of 457 mm and planks 914x152.4 mm. They can be stacked in any order, including diagonal ways.

Soundproofing. Art Vinyl vinyl tile absorbs sounds well and does not create an echo in the room.

Possibility of laying on the old coating - laminate, tile or solid floor.

Many design options, with vinyl tiles you can imitate any natural flooring or create a bright modern interior.

disadvantages coverings "Art Vinyl"

There are really many advantages of vinyl coating, which is the reason for its huge popularity. However, there is on "Art Vinyl"

home > Civil Engineering