Washing vacuum cleaner instructions for use. How to use a washing vacuum cleaner: the secrets of simple and effective wet cleaning

Borodina Galina Valerievna

A A

Washing vacuum cleaners are universal assistants in cleaning around the house. They are replacing mops, window cleaning newspapers, and other "artisanal" cleaning methods. The versatility of these devices often remains a secret for owners. Devices that are bought because of good performance, but are not used even at half their strength - a common case. Let's talk today about how to use a washing vacuum cleaner and in what areas it shows excellent results.

Unlike a standard dry vacuum cleaner, a washing vacuum cleaner requires preparation.

In general terms, the entire cleaning process using a washing unit consists of several stages:

1. Studying instructions- Manufacturers approach the design of vacuum cleaners in different ways. A device of one brand may work according to principles that are unacceptable for a device of another brand. Studying the briefing before starting work is a mandatory step.
2. Filling built-in containers with water and detergents in the required proportions.
3. Turning on the vacuum cleaner. When using for the first time, it is not recommended to turn on the unit at full power immediately. You should get used to different modes of operation and choose the most convenient one. This choice will occur gradually in the course of use.
4. Vacuum cleaner testing. If the owner of the device is not sure that the impact of household chemicals will be transferred by the surface calmly, he conducts a test. The brush of the washing vacuum cleaner is passed only along the edge of the coating, and then the reaction of the material is evaluated.
5. Room processing. The room in which the cleaning is carried out is evenly covered with detergent. Experts advise starting cleaning from the far corners of the square. With this method, the end of cleaning will be more convenient.
6. Surface cleaning from the remains of the washing liquid. After cleaning with the use of household chemicals, its layer must be removed. This is done with the help of clean water, heated to a warm (not hot!) State. To this end, the previous portion of the liquid with household chemicals is poured out and the container is filled with new contents.
7. Drying. If you leave the floor damp after cleaning, it will deform - regardless of the quality of the coating. To prevent this consequence, the floor is dried with a suction nozzle. It comes with the vacuum cleaner when purchased.
8. At the end cleaning, the vacuum cleaner is disassembled and then washed. If the appliance retains liquid residue, it deteriorates over time or emits unpleasant odors.

Expert opinion

Borodina Galina Valerievna

If the owner of the device wants to clean problematic and stubborn stains, then they are treated in a separate order with a detergent mixture. To increase the efficiency of cleaning, the brush lines are overlapped.

Assembly

Particular attention must be paid to the first assembly of the vacuum cleaner before use. People who bought this unit have problems at this stage.

Preparation of the device for use consists of six stages:

1. Filling the reservoir with liquid.
2. Attaching the capillary tube to the spray nozzle and to the connector on the housing.
3. Attaching the capillary to the suction pipe with clips.
4. Connecting the suction pipe to the hose.
5. Inserting the hose into the connector that is intended for it.
6. Unwinding the cable and connecting the device to the outlet.

Some units are equipped with filters. For the filters to work correctly, it is added to the tank in which dirty water is collected.

Before starting work, the owner of the washing vacuum cleaner checks three points:

• Filters are clean.
• Dry filters.

• The filters are in place.

The task of a defoamer for a vacuum cleaner is easy to understand from its name. This substance prevents the formation of foam in the aquafilter during operation. It is necessary to remove the foam to protect the engine and prevent the appearance of mold in the device. Defoamers are available in liquid or powder form.

Disassembly

When all washing procedures are completed, it is time to disassemble the vacuum cleaner.

This stage is just as responsible as the assembly. The duration of its operation depends on the quality of care for the device after washing the floors.

After turning off the device, you must do the following:

1. Laying the cord in the socket, which is built into the case.
2. Removal of a container overflowing with dirty liquid.
3. Pouring liquid and rinsing the container.
4. Cleaning nozzles and hoses under running warm water.
5. Drying all parts of the vacuum cleaner.
6. Removal of drops from a clean tank and final drying.

A big mistake of the owners of washing vacuum cleaners is ignoring the filters. These parts are responsible for the quality of cleaning and the condition of the air after cleaning. After each use of the vacuum cleaner, they are cleaned and dried. Clogged wet filters render the device unusable. Regardless of the type of filter (single-use or reusable), this part is changed at fixed intervals.

Expert opinion

Borodina Galina Valerievna

With constant non-drying of the elements, the vacuum cleaner is covered with a fungus from the inside. During subsequent cleanings, the spores of the fungus spread throughout the apartment and lead to even more pollution. This effect is especially dangerous for allergy sufferers.

Equipment

Washing vacuum cleaners have different equipment - depending on the manufacturer. But all of them are supplied with a certain number of nozzles. It is the nozzles that provide the versatility of the unit and interact with different coatings.

The standard set of nozzles that come with the washing device includes the following:

• Nozzle for washing the floor and cleaning the carpet.
• Nozzle for cleaning upholstered furniture.
• Nozzle for collecting debris from inaccessible (for a conventional brush) places.

• Nozzle for polished wooden surfaces.
• Nozzle for washing glasses and mirrors.

Some manufacturers sell specific nozzles separately. This function is convenient for those users who need a vacuum cleaner (cleaning lampshades, wool, flat floors, etc.).

Applications

Have you ever used a vacuum cleaner?

It was the caseI will be soon!

The washing vacuum cleaner favorably differs from standard models in its versatility.

It includes the following applications:

• Remove bulky debris.
• Clean up wet debris and spilled liquid.
• Humidify and aromatize the air during the cleaning process.
• Clean clogs in sinks (special nozzles are needed for this purpose).

• Remove dirt from various surfaces - tiles, stone, linoleum, soft textures (furniture upholstery, carpet, curtains).
• Clean vertical surfaces - windows, mirrors, curtains.
• Get rid of animal hair in the house.

Each function has its own way of working. Next, we will consider specific ways to use a washing vacuum cleaner.

Laminate

Laminate is divided into groups - depending on the water-repellent properties. There are models with increased strength - they are not afraid of moisture. But there are also fragile varieties, contact with moisture of which leads to the unsuitability of the material. The coating becomes blistered, bulging or cracking.

You may be interested in:

In order for the cleaning of the laminate with washing models to be safe, you need to follow a few simple prohibitions, which include:

• The use of alkali and all detergents that contain this component.
• Use of liquids that include wax or silicone.
• Moisture leakage into the joints of adjacent socks.
• The use of brushes with coarse bristles (the bristles leave marks on the laminate).
• Steam treatment of the laminate (high temperatures deform the material).

• Compliance with the frequency in cleaning the laminate - detergents are applied to the surface no more than once or twice a week.
• Grouting joints with mastic for sealing (this paste lays down a protective layer on the laminate and prevents the joints from passing moisture).
• Wiping the coating with mops, the rags of which are made of microfiber (this material quickly absorbs moisture and does not leave scratches).

Expert opinion

Borodina Galina Valerievna

When buying a washing vacuum cleaner for working with laminate, preference is given to models with medium or high power. Devices with insufficient power do not provide complete drying.

Parquet

Parquet made of natural wood is fragile and subject to deformation no less than laminate. Even with ordinary wet cleaning with a rag, experts advise how to wring it out.

Washing vacuum cleaners may be used under the following conditions:

• The parquet flooring is treated with water-repellent impregnation and protected with a layer of varnish.
• The vacuum cleaner quickly absorbs the liquid, leaving no residue.

• When washing the parquet, aggressive detergents are not used (there is a high probability of leaving streaks).

Carpet

Cleaning carpet from dirt requires the use of several devices.

The procedure consists of several stages:

1. The carpet is cleaned with a standard vacuum cleaner in dry cleaning mode. To increase efficiency, a vibrating brush is put on the hose. If you skip this step, the filters of the washing vacuum cleaner will become clogged with large dirt particles.
2. A test check is in progress. If the carpet is being cleaned for the first time, the washer is tested on a small area of ​​the material. This rule is mandatory in cases where detergents contain chlorine (the substance affects the color of the carpet). If the experiment does not negatively affect the pile, cleaning will continue.
3. Water and shampoo are poured into the tank. It is important to control the amount of shampoo. For machines with a wet cleaning function, more is not better.
4. The nozzle for work with carpets is selected. Long bristles require long bristles and vice versa. The effectiveness of cleaning depends on the correspondence of these parameters.
5. Cleansing is carried out, during which the nozzle is moved up and down until the material is cleaned. Processing is carried out sequentially on small segments - so that the cleaning is uniform.
6. The carpet is thoroughly dried. The drying period of the carpet directly depends on the length of its pile. Short pile dries within one to two hours. Long instances take twice as long.

In total, to clean the carpet you will need a set of several accessories:

• Shampoo.
• Brush nozzle.

• Pure water.
• Vacuum cleaner with wet cleaning function.

Window

Not all vacuum cleaners are suitable for cleaning windows. Those models in which there is an option "Window washing" will cope with this task. Information about it can be found in the attached instructions or on the official website of the manufacturer. Included with such devices are usually brushes designed for glass surfaces.

Cleaning takes place according to the following rules:

1. The length of the tube is adjusted so that it reaches all areas of the window (taking into account the attached nozzle).
2. The water supply level is regulated to the minimum condition. Maximum values ​​lead to the appearance of streaks on the glasses.
3. Washing windows using the “bottom-up” technique. First, the upper sections of the glass are covered, then the nozzle moves to the lower ones.

The washing vacuum cleaner copes with washing all windows, with the exception of models with a rubber seal. Under the action of hot water, the sealant melts.

Conclusion

Washing vacuum cleaners work with almost all types of surfaces. But this does not mean that when using them, you can forget about the precautionary rules. These devices can damage carpets, floors, and glass if used incorrectly. Vacuum cleaners themselves also become unusable with improper care. Therefore, before buying such a serious unit, it is important to evaluate your strengths and willingness to make efforts to study its features.

We cannot imagine a single day without using at least some electrical appliance. Similarly, household appliances for cleaning the house are gradually replacing obsolete brooms, mops, etc. At the same time, every year new items delight us more and more with their functionality and convenience.

Technological progress has not passed by and such a type of device as a vacuum cleaner. An increasing percentage of our homes are precisely washing vacuum cleaners. But not everyone has yet figured out how to use them. We'll try to help.

The main functions of the washing vacuum cleaner

Unlike a conventional washing vacuum cleaner, it has the ability to perform a more thorough, deep cleaning. That is, now the need for separate cleaning of carpets will disappear. Of course, this will require various tools and sprays, but you don’t have to work with pens.

There are two types of washing vacuum cleaners:

• vertical;
• horizontal.

The vertical washing vacuum cleaner has the shape of a cylinder or a trapezoid, while it is distinguished by large overall dimensions. This type is used mainly for cleaning large areas (for example, in a country house, club, etc.). The disadvantage of the vertical washing vacuum cleaner is, of course, its high weight. The volume of the tank for clean water in it reaches up to 10 liters, and for waste - even up to 30 liters.

The horizontal washing vacuum cleaner in appearance practically does not differ from the usual type. A big plus of this type is maneuverability, rather small size and weight. The volume of the clean water tank will be about 4-5 liters.

At the same time, horizontal washing vacuum cleaners differ among themselves in the position of the tank:

• one above the other - not a very convenient design, forcing the vacuum cleaner to be disassembled almost completely to drain the waste water;
• the clean water tank is located outside.

How to get started

To get started, try to at least read the instructions that come with each type of equipment. After all, different companies produce devices with their own characteristics. However, the instructions for the washing vacuum cleaner are generally typical for all models. We will only give general recommendations.

So, let's start, perhaps, with the choice of detergent for the vacuum cleaner. The market for household chemicals is so wide that it makes no sense to recommend any particular product. It is better to talk about the possibility of using the one you have already chosen. Before starting work, make sure that the product will not damage the color of the fabric. It is better to test in advance on a small inconspicuous area by applying the product with a plain white cloth. If everything is fine, then you can start cleaning.

We add the product to the prepared water according to the recommendations indicated on the package. Pour the water solution into the tank and close it. We turn on the pump and the turbine of the vacuum cleaner and get to work.

1. Many manufacturers recommend overlap cleaning in parallel paths;
2. It is better to start cleaning from a far corner;
3. To achieve a better effect, it is necessary to walk over the surface again, using ordinary clean water instead of a solution;
4. If you are using carpet shampoo, it is a good idea to add a defoamer to the waste water tank.

How to clean a washing vacuum cleaner

At the end of work, turn off the washing vacuum cleaner not only with a toggle switch (button), but also unplug the plug from the outlet. Empty the tanks, rinse and dry thoroughly before assembling the whole structure.

Having tried to use a washing vacuum cleaner at least once, many people cannot refuse this wonderful device. Learn, try and you will succeed!

A washing vacuum cleaner is considered a universal device with which you can make dry and wet cleaning. So, it not only accumulates dust in the bag, but can perform wet cleaning and wash surfaces. Its functionality depends on the power and the availability of a variety of attachments. You will learn about the principle of operation and use of the vacuum cleaner below.

The principle of operation of the washing vacuum cleaner

The use of a washing vacuum cleaner allows you to clean without streaks and wash the surface well, which also quickly becomes dry. It guarantees this thanks to the principle of operation of the device:

1. The washing vacuum cleaner has two capacities. One contains pure water, the other contains detergent. When you turn on the vacuum cleaner, the water is mixed with detergent.
2. This solution begins to move along the hose and approaches the nozzle.
3. Due to the pressure created through the sprayer, the solution begins to wet the contaminated surface, including dust.
4. Water absorbs impurities that have been split under the pressure of the solution, and then through the tube it is again sucked into the vacuum cleaner and accumulates in another tank.

Complete with a vacuum cleaner, they must sell a hose, a bag, filters, nozzles and tubes.

To clearly see the principle of operation of the device, you can watch a video in which a simple do-it-yourself washing vacuum cleaner is assembled:

With the help of a washing vacuum cleaner, you can also dry clean the room. It will collect food debris on the floor, animal hair and fluff from birds, even pet waste products.

How to wash floors with a washing vacuum cleaner?

Washing goes like this:

1. If there are debris on the surface, sweep the floor with a broom or use the dry dust attachment on a vacuum cleaner.
2. Fill the vacuum cleaner with water and detergent.
3. Start mopping the floor. If the vacuum cleaner is powerful, then the floor will be dry and shiny in a few minutes.

The washing vacuum cleaner first wets the floor surface, then picks up the contaminated liquid and places it in a special container.

Using a vacuum cleaner is best to clean surfaces covered with ceramic tiles or linoleum.

Is it possible to wash laminate with a washing vacuum cleaner

It is known that the floor with a laminate coating can not be wet, but the class of the laminate is of decisive importance. Some specimens are covered with a moisture-proof layer that repels liquids. Such a laminate has increased strength (32, 33 class). So, it can be washed with a washing vacuum cleaner, but 31 classes cannot!

If you still decide to do this procedure, it is desirable that the vacuum cleaner be of medium or high power, but not weak. During washing, the vacuum cleaner sprays a solution intended for wet cleaning of the floor, while the surface becomes wet. Only a powerful washing vacuum cleaner is able to dry the floor well after itself and prevent liquid from leaking into the cracks.

In order to wash the laminate with a washing vacuum cleaner, you must adhere to a number of recommendations:

• Do wet cleaning no more than 2 times a week.
• Do not use alkali as a detergent.
• Do not use liquids with wax and silicone.
• Do not allow liquids to enter the joints of the boards.
• After a while, rub them with mastic for sealing.
• Do not use brushes with coarse bristles.
• Do not use steam treatment.

In order for the laminate to serve for a long time and have its original appearance, it is better to wipe it with a mop with a microfiber cloth, which wipes well and does not scratch the surface.

Is it possible to wash parquet with a washing vacuum cleaner

• Washing is allowed only for parquet boards, well treated with a special impregnation and covered with a protective varnish.
• The vacuum cleaner must be powerful, which does not particularly wet the floor and thoroughly, quickly absorb liquids from the surface.

How to clean carpets with a vacuum cleaner

To clean carpets with a washing vacuum cleaner, you need to prepare:

• shampoo for wet cleaning of carpet surfaces;
• clean water in order to pour into a special container located in the vacuum cleaner;
• brush head;
• vacuum cleaner with washing function.

Step-by-step instructions on how to wash the carpet with a washing vacuum cleaner:

1. Clean the carpet with a regular vacuum cleaner, putting the vibra-brush attachment and remove all excess dust, sand from the street and dirt. This is done so that the filters of the washing vacuum cleaner are not clogged with large particles of dirt and accumulated dust.
2. Before you start cleaning the carpet, you need to conduct a test to find out how the product will affect the carpet surface. This is especially important if you use a detergent that contains chlorine, as it can affect the brightness of the carpet or ruin the pile. For the test, it is necessary to wet the sponge in the product and wipe it in an inconspicuous place. If the pile does not undergo any changes, the color of the paint does not fade, which means that you can start washing the carpet.
3. Fill the tank with water and add washing shampoo, in this case it is important to follow the instructions and avoid excess.
4. Select the desired brush head. It is known that if the pile on the carpet is long, then a nozzle with long bristles on the brush is selected. When washing a carpet or carpet with a short pile, an appropriate brush head with shorter bristles is taken.
5. Carry out cleaning, in which it is necessary to drive the nozzle up and down until the surface is completely cleaned. It is recommended to carry out processing in small areas for better cleaning.
6. After wet cleaning the carpet, it must be dried with a vacuum cleaner. This will take quite a bit of time, but it will be possible to move around the carpet when the carpet is completely dry to the touch. This will take about 1.5-2 hours if the pile is short. With a long pile, drying will continue up to 3 hours.

Such a vacuum cleaner is indispensable if the house has long pile carpets, because it will perfectly clean them of accumulated dust, and the texture will remain unchanged.

How to clean windows with a vacuum cleaner?

To wash windows, you must have a multifunctional vacuum cleaner with the “window cleaning” option. It is desirable that there is a brush available that washes the glass. Cleaning is carried out according to the following instructions:

1. Adjust the length of the tube on which the nozzle is attached so that it is possible to get dirt in hard-to-reach places.
2. Set the water supply level to the "minimum" position, you can not use it - "maximum", otherwise, after washing, stains will remain.
3. Start washing windows from the top and gradually go down lower and lower to avoid dirt, stacks and stains.

Such cleaning can be applied to all windows, except for those that have a rubber seal, as it may partially melt when heated.

What else can be washed with a washing vacuum cleaner?

With the help of a washing vacuum cleaner, you can remove stubborn stains on upholstered furniture. To do this, cleaning is carried out according to the instructions:

1. The nozzle for washing is selected for the vacuum cleaner.
2. A solution is prepared and poured into a barrel.
3. Cleaning begins, and the nozzle is carried out from top to bottom. Under pressure, the cleaning agent is applied to the furniture. It dissolves the dirt, and the vacuum cleaner already sucks up all the dirt.
4. Dirty water is poured out, the barrel is rinsed, clean water is poured without the addition of detergents.
5. Furniture upholstery is being rinsed.

Upholstered furniture often has inaccessible places. To clean them, you need to use a crevice nozzle.

An example of cleaning a sofa with detergent is shown in the video:

Video: How to choose and use a washing vacuum cleaner?

How to choose a washing vacuum cleaner, the expert of the program “Everything will be kind” will tell:

The following video provides instructions on how to properly use a washing vacuum cleaner using the German THOMAS model as an example:

So, in the presence of a dwelling with a large area, a washing vacuum cleaner is simply an indispensable device. It will be a real help in cleaning and maintaining upholstered furniture and carpets in proper condition. Moreover, its operation does not require special skills, the main thing is to follow all the recommendations and the manufacturer's instructions.

In contact with

Even if the house is cleaned every day, the dust will still reappear. The question arises, how to make sure that cleaning does not take a lot of time? When cleaning carpets, furniture and other coverings with a simple vacuum cleaner, you most likely will not achieve a satisfactory result. To achieve it, it is necessary to use a washing device, since it is it that will clean many surfaces without much difficulty. So, how to use a washing vacuum cleaner?

1. Today, all washing vacuum cleaners work on the same principle. To start using the vacuum cleaner water must be poured into a special tank. The containers in the vacuum cleaner, depending on the design, can be located either side by side or in different sections. There are such washing vacuum cleaners in which the clean water tank can be located inside the used water tank.
2. At the first stage of cleaning, water is sprayed onto the surface to be cleaned using a special nozzle. Then you need turn on the mode responsible for suction into the waste water tank previously sprayed water along with dust. If the quality of the work done did not satisfy you, you need to add clean water and repeat the cleaning process again.
3. The washing vacuum cleaner can also work in dry mode. In this situation, dust and debris are sucked up and fall into a special bag, which simultaneously acts as a filter. After passing through it, the air is purified and comes out. This mode will help when cleaning surfaces that are sensitive to dampness and moisture, such as laminate.
4. If you need to clean the carpet or other similar surface, it is best to use special detergents, the cleanliness effect of which is greatly increased. This tool is sprayed onto the surface under a certain pressure, while knocking out small debris and dissolving dirt. The pressure of the air stream created by the vacuum cleaner allows you to clean the carpet to the full depth of the pile. After cleaning, the surface remains wet and must be dried, and to do this more quickly and easily, you can turn on the water collection mode.
5. In stores you can find many different cleaners for washing vacuum cleaners. There are, for example, disinfectants that kill mold and fungus, foaming agents that are more suitable for cleaning carpets, and antistatic agents that create a dust repelling effect.
6. Thus, a washing vacuum cleaner will help you clean with more efficiency and less effort than a simple vacuum cleaner.

How to use the Thomas washing vacuum cleaner (Thomas)

It is almost impossible to imagine cleaning without using a vacuum cleaner today. This electric device greatly simplifies the cleaning process and saves time. In this article, we will tell how to use a vacuum cleaner. After all, it is thanks to the observance of the operating rules that it is possible to avoid unwanted breakdowns of the device and extend its service life.

After purchase, before using the vacuum cleaner, read the instructions carefully, which is included with the device. Pay special attention to how long you can use the vacuum cleaner directly for cleaning and in what conditions it should be stored.

Many believe that the effectiveness of the cleaning itself largely depends on the type of nozzle used. In fact, this is not the case, so there is no need to buy any additional accessories designed for different surfaces. The fact is that the vacuum cleaner removes debris equally from all types of surfaces. Of course brushes of various lengths may improve cleaning performance slightly on some delicate surfaces, but in most cases you can get by with the standard nozzle.

When buying a vacuum cleaner, pay attention to its power - it should be high enough. For example, for cleaning carpets, it should be at least 750 W. In this case, the device must be equipped power regulator so that when working with more delicate or fragile surfaces, the traction can be reduced.

Try your best clean the dust bag more often, since the power of the vacuum cleaner also depends on the accumulated debris. It is worth noting that if your device is equipped with a fabric bag, remember that it should never be washed, as it can permanently fail.

doing the cleaning, no need to press the nozzle very hard on the surface, as the device may overheat due to the fact that air does not enter it. As a result, the vacuum cleaner may fail. Move the brush across the floor should not be very fast and with a uniform load on it.

It should also be remembered that no need to use the vacuum cleaner without a break for more than 30 minutes. Even if the cleaning is delayed, it is better to turn off the device for 5-10 minutes so that it has time to cool down. Thus, you will avoid breakdowns and loss of power during cleaning.

As for washing vacuum cleaners, thanks to the use of water, they do an excellent job of cleaning any surface. The only difficulty is the storage of such a unit. The fact is that washing vacuum cleaners are quite large in size, so you should take care of a separate place to place such a device. Also on sale you can find washing vacuum cleaners of compact size, but their power is not very large.

Using this type of vacuum cleaner is quite simple. The main thing - Avoid standing water between cleanings. It is also mandatory to dry the brushes and containers of the device after work.

As you can see, using a vacuum cleaner is quite simple. Before using the device, be sure to read the instructions, because, perhaps, for the correct use of your vacuum cleaner model, it is necessary to perform some additional terms.