Shoe rack options. How to make a DIY shoe rack

A shelf for shoes is a necessary attribute of the hallway, because thanks to it space is freed up and the room looks neat. It is not difficult to buy a shoe rack in a store, but it is small simple design is not cheap. If there is a desire and imagination, then figuring out how to make a shoe rack with your own hands is easy. Material home master serve as laminate panels, boards, plywood, pipes, cardboard and wooden bars. Having shown imagination and skill, you can make furniture that you will not find in the store.

From PVC pipes

An easy-to-make shelf made of PVC pipe sections will surprise you with a wealth of decorative possibilities. For its manufacture you will need:

• PVC sewer pipe with a diameter of 300 mm;
• sandpaper;
• wallpaper glue and epoxy;
• washable wallpaper.

Length plastic pipe is 3 m, so it must be cut into 10 parts of 30 cm, because each compartment of the shelf will be of this length. You can cut the material with a jigsaw or grinder. Every detail must be carefully crafted sandpaper to remove roughness and make the surface of the ends as smooth as possible.

To decorate the blanks, you will need a roll of wallpaper - choose a pattern and color to your liking. The shoe rack is located at the door, so it can get dirty in bad weather, so it’s better to paste over it with washable wallpaper that is easy to clean. Each part is glued on the outside and set aside to dry. Finished segments are assembled into a single structure. It will consist of three elements at the base and top, and four segments in the middle.

First, horizontal stripes are glued, and after the epoxy glue dries, the parts are glued on top of each other. It turns out an interesting and original shelf that requires a minimum of material costs, and which you can easily assemble yourself.

From cardboard

Cheap and lightweight construction for summer shoes and slippers it will turn out from cardboard. Suitable for any box household appliances. To make an unusual shelf in the hallway, prepare simple items:

• scissors;
• scotch;
• stapler;
• ruler and pencil.

Several rectangles are marked on a sheet of cardboard, the width of which is 25–30 cm, and the length is taken over the entire sheet. The number of blanks depends on your desire - each is a pocket for one pair of shoes. The cut out rectangles are divided into three equal parts. Two lateral ones are bent in the shape of a triangle and fastened together with a strip of adhesive tape or a stapler. Having made pockets from all the blanks, they are partially inserted into each other and fastened into a tape. This design is hung on the wall, so it will be appropriate in the country or in the interior. rustic style. To give a more attractive appearance, the product can be pasted over with colored paper or self-adhesive film. This simple and exciting work can be done with children.

Wooden

A beautiful shelf can be made at home. It will take longer to tinker with it than with cardboard, and the cost of the material is higher, but the result is worth it. The shelf will be round, made of wood, with two tiers and dividing bars. To work you need:

• 4 sheets of wood 15 mm thick;
• screws;
• dye;
• caps for fasteners;
• jigsaw;
• drill;
• Grinder.

Note! Quantity and size Supplies depends on the material you used and the size of the shelf, but, as a rule, the consumption is small.

Round blanks are cut out of three sheets for the top, middle and bottom of the shelf. The diameter of the circles is 600 mm, they are drawn using a simple fixture. A nail is hammered into the center, a cord 300 mm long with a pencil at the end is attached to it. Cut out blanks with an electric jigsaw. For dividing crossbars, which will be mounted on each tier in 4 pieces, 8 identical parts 160 by 200 mm in size are cut out. The edges of all blanks are carefully processed with a grinder.

On the smooth surface of the parts, the attachment points of the separating parts are marked. The marking is applied to the upper surface of the lower circle, the middle circle is marked on both sides, and the upper one is inside. Holes with a diameter of 2 mm are made at the attachment points, the same marks are drilled on the separating parts.

Assembly

4 planks are screwed to the bottom circle along the marked lines, 2 screws are required for each. The central circle is attached to the separating elements, and holes are drilled between the attachment points for fastening the upper separating parts. These slats will be located a level higher and located between the lower elements. They will also connect two circles - the central and the upper one. The shelf is assembled, it remains to paint it and close the places where the screws are screwed in with caps. Convenient and spacious shelf will be a great addition to the interior of the hallway.

Each handmade thing has not only a practical function, it fills the house with special comfort, because it is made with love and especially for this place.

Video

See how you can make a solid shoe rack from an old closet:

A shoe shelf in the hallway is a necessary attribute. Do-it-yourself designs for shoes made from various and sometimes unexpected materials look original. The elegant interior of the hallway, even the most sophisticated one, will not look attractive if the shoes in the room are scattered or piled up.

It is recommended to fit special furniture designed for shoes into the interior of the hallway, and the room will look well-groomed and clean. Shelves in trading network are quite expensive and it is not always possible to choose the option that suits you. A do-it-yourself shoe rack will help decorate the hallway, save money and solve the problem of storing shoes.

Shelf materials

Various materials can be used to make these products. It could be a tree different breeds, plastic, cardboard, fabric, metal. Shelves made of chipboard look neat and great, especially when combined with a soft seat. In order for the shelf to harmoniously fit into the interior of the hallway, it can be varnished or painted.

Wooden shoe rack

Most often, shoe shelves are made from a single solid wood, plywood, fiberboard or chipboard. Furniture for the room is usually chosen so that it harmonizes well with the overall interior. The shoe rack is no exception. It must match the overall design. Often there are situations when the product does not meet the requirements of the owner. In this case, it is better to make a wooden shelf with your own hands. Before starting work, you should consider the location of the shelf: in the corridor in the corner, against the wall, in a niche. The shelf should be comfortable, roomy, easily accessible, but not bulky.

There are many various forms shelves:

Closet;
- round shelf-carousel;
- classical from cells;
- seat;
- curbstone.

It can be made in several ways. Buy ready-made standard parts, assemble the shelf yourself at home and install it in a convenient place. Such work is reduced exclusively to the assembly of the product.

The second way is much more difficult. Work on the manufacture of the shelf begins with the preparation of tools and material. You will definitely need a drill, a planer, a screwdriver and a saw. As well as additional materials - paint, sanding paper, glue, self-tapping screws, varnish, metal corners.

Shelf in 3 tiers of horizontal sidewalls and shelves

Working process
1. From a solid board with a thickness of 1.5-2 cm and a width of 30-35 cm, we saw two sidewalls, the height of which will be 70-90 cm.
2. We prepare six pieces of transverse bars. Width - 3-5cm, and the thickness should be 2-3cm, the length will be equal to the width of the sidewall.
3. We prepare 3 shelves (there may be more) 60-80 cm long.
4. We sand the details.
5. We make markings on the sidewalls and fix the holders for the shelves from the bars that we have prepared with self-tapping screws. We strengthen all the details of the assembly with metal corners. Laying shelving. We get a finished shelf. It remains to cover it with varnish, paint.

Chipboard shoe rack

Shelves made of solid wood, the simplest ones, will cost more than those made of chipboard and wood-based materials. A convenient do-it-yourself shoe rack can be made from plywood, fiberboard or chipboard.

Preparation of materials

We buy laminated, moisture-resistant chipboard 16mm thick. It is worth considering one property of chipboard, if it is not sawn correctly, the material will begin to crumble. It would be more expedient to cut the parts in the workshop or to order according to the sizes provided.

For a shelf, you will need two side walls, a back wall of the structure, a top cover, two internal shelves, a plinth part, shelf holders. From additional materials: wood glue, a screwdriver, confirmants and plugs for them, a melamine edge to protect against crumbling and give the details of the shelf a finished look. Door latches and hinges should be used if the shelf has a door.

Manufacturing process:

1. We drill holes at the marked places for fastening parts. Shelves in the design, if desired, can be installed at different heights: for shoes, boots, sandals, boots.
2. We seal all the ends of the parts with a melamine edge (using a hot iron).
3. On the inside of the sidewalls, we fix the shelf holders at the marked places.
4. We attach the back wall to the sidewalls.
5. We fix the top shelf and base.
6. If a hinged door is provided, install it on furniture hinges.

The construction is assembled with the help of confirmants. The rigidity of the structure can be enhanced with the use of corners made of metal. You can make a shoe shelf from fiberboard or plywood in the same way. Ready product will need to be painted or glued.

Shoe shelf made of cardboard

A do-it-yourself shoe rack made of cardboard will require a pencil, scissors, a ruler, nails, a hammer and a tape measure. You will also need boxes from under the refrigerator or TV, paper clips or pieces of wire, a stapler, wallpaper or self-adhesives.

The process of making cardboard shelves

1. We cut thick cardboard into rectangles.
2. On the narrow side of the rectangle, mark three stripes with a pencil.
3. Divide the long side into two parts.
4. Cut off the side rectangles, they are not needed.
5. It turns out a T-shaped figure.
6. On the side wings, mark the rectangles with a pencil from the midline to the edge along the oblique.
7. We get two triangles.
8. Both rectangles are bent in a straight line.
9. We bend each rectangle obliquely from the center to the outer edge.

Before assembly, we decorate the pockets, they can be pasted over with wallpaper, or painted. To collect pockets, we start external triangles behind their back. We fix with glue, a stapler or wire. The pocket is ready. You can make several of these pockets and stick to a common base or stick one to the other.

In the hall small size a shoe rack located in the corner will look good. For big family multi-storey shelf will serve good option, it greatly save space. And the top shelf, made even, will serve as a stand for keys, a bag or an umbrella.

A do-it-yourself shoe rack will make it possible to translate into reality any design solutions. It will become a true decoration for your hallway!

Furniture for storing shoes is diverse. Conventionally, such pieces of furniture that have different sizes and appearance, unite common name- shoebox.

Furniture designed to store shoes is varied

Shoe cases can be presented different types furniture. It could be:

• shoe stand;
• cabinet with drawers and shelves;
• shoe cabinet;
• nightstand;
• dresser;
• special rack;
• high shelf or small shelves;
• shoe cabinet.

In addition to size and color, important parameters that you need to decide on when choosing include the material used in the manufacture, as well as the configuration.

Shoe racks can be open and closed.

1. The first option allows the shoe to dry quickly, and the disadvantages are represented by a significant accumulation of dust, accessibility to pets and not too attractive appearance.
2. Closed models are aesthetically pleasing, equipped with doors that serve as full protection for shoes.

How to design a shoe rack (video)

Characteristics of the types of shoe racks in the hallway

Classification of furniture for shoes is carried out not only by the type of material used in the manufacture, but also design features, the principle of operation and appearance. MDF, chipboard-laminated type, forging, durable metals and high-strength modern plastic, wicker and natural processed wood are most often used for manufacturing.

Narrow shoe racks in the hallway

Standard models are usually 600-800 mm wide. A wider version is installed in spacious hallways and can have a width of 100-120 cm, which allows you to store any type of shoe and prevents deformation. Narrow models are designed specifically for small spaces, and their width, most often, does not exceed 13-18 cm, which makes installation convenient even behind a drop-down door. It should be noted, that narrow designs are not designed to store winter shoes with high tops.

A compromise option is represented by narrow shoe racks with a width of 400-500 mm, in which the shoes are installed quite freely and dry well. Some manufacturers produce narrow and high exclusive models with a depth of 150-200 mm. Among other things, the consumer can order a non-standard model in shape or size, as well as make it on their own using standard drawings and diagrams.

Narrow models of shoe racks are designed specifically for small spaces

Shoe cases with a seat

Designs equipped with a seat, which is most often sheathed with soft upholstery fabric, velor or leatherette, are widely used in fairly spacious rooms. Shoe-padded stool or shoe-bench - perfect solution for small hallways. The advantage of such models is the presence of seats installed on top of the pedestal, which will save usable space.

The seat can be equipped with a backrest, and this design resembles a small sofa in appearance. Additional equipment of models with a seat is most often represented by sections for umbrellas and side shelves.

Gallery: shoe rack in the hallway (64 photos)

Racks and shelves for storing shoes

To open type shoe storage includes several options that differ in design features and are presented:

• frame systems in the form of a set of racks and racks made of wood or metal. Such systems can be easily assembled and disassembled, they do not take up much space, which is especially important for small hallways;
• a modular system containing compartments, shelves and sections that are easily and quickly assembled independently according to the principle of the designer;
• mesh system, characterized by lightness and compactness, which is very important when arranging small hallways.

Panel systems are popular, very stylish, but expensive designs that are easy to use and can become a real decoration of almost any interior.

Ideas for storing things in the hallway (video)

Shoe design

A shoe rack of any size and type serves as part of the furnishing of the room, and can be not only open, corner or wall-mounted, but also poured in style. Designs can be made in the style of "modern", "rococo", "classic", "baroque", "hi-tech", "Provence" and "country", as well as "fusion".

• designs that have an original appearance and carved legs are ideal for decorating a rococo hallway and will serve as a good addition to elegant pieces of furniture;
• for a private household or apartment, decorated in decorative style“Baroque” is best suited for a beautiful forged shoe rack, the dimensions of which are selected based on the area of ​​\u200b\u200bthe hallway;
• the entrance hall, made in a minimalist style, is perfect for the purchase and installation of simple and discreet, plain iron models equipped with convenient drawers.

Particularly popular in last years light and practical, incredibly attractive wicker designs are used, which allow you to decorate the hallway in the Provence style.

A shoe rack of any size and type serves as part of the furnishing of the room.

How to make a wooden shoe rack in the hallway with your own hands

Traditionally, the simplest and cheapest option for shoe storage is a do-it-yourself wooden structure. Wood is a natural, very comfortable and aesthetic material, characterized by environmental friendliness. Among other things, shoe designs made of wood and treated with special antiseptic formulations, are durable and suitable for installation in halls decorated in almost any style.

Preparation of drawings and diagrams with dimensions

At the first stage, a design sketch is developed. You can take as a basis ready-made schemes and drawings of such a piece of furniture for the hallway, or develop a sketch with a designation yourself, based on the size of the room and its layout. In the drawing being executed, it is imperative to display the number and dimensions of shelves or other elements, as well as the overall dimensions of the entire structure.

As a material for self-manufacturing shoe racks, you can use MDF boards, chipboard boards, plywood sheets or wooden planks. One of the most durable and easy-to-use materials is plywood sheet, but even moisture-resistant plywood needs additional processing and staining. The high cost of MDF boards allows only the front part of the furniture to be made from such material, and the body of the structure, as a rule, is assembled from fairly budget chipboard boards.

At the first stage, a design sketch is developed

Manufacturing steps

For the manufacture of a structure made in the style of minimalism popular with designers, it is necessary to prepare the basic materials and working tools presented:

• furniture metal corners in the amount of eight pieces;
• self-tapping screws;
• kings;
• hinges for hanging doors in the amount of four pieces;
• metal mesh shelves, the number and size of which directly depend on the prepared sketch;
• handles for opening doors;
• construction tape measure;
• marker;
• screwdriver or hand drill;
• screwdriver;
• grinder or sandpaper;
• a hacksaw for wood or an electric jigsaw;
• hammer;
• pliers.

All elements of the drawing are transferred to the material selected for the manufacture of wooden shoes. In accordance with the markup, the parts are cut with a hacksaw. After all the details are cut out, the sidewalls are drilled with the shoe construction being performed. AT drilled holes it is necessary to securely fix metal drawers with the help of confirmations, the end part of which must also be drilled. If the selected depth is 55-60 mm, then the diameter of the drilled holes should be 0.5 cm, and in the sidewalls - 0.8 cm. Be sure to check the coincidence of all holes made.

Shoe cabinet-ottoman or shoe cabinet-bench - the perfect solution for small hallways

At the next stage, it is necessary to securely screw four metal furniture corners to the lid. The remaining four similar pieces of furniture must be fixed on back wall manufactured design, which will allow them to be used as convenient wall fasteners. After the lid is screwed on, it is required to connect all the remaining cut out elements of the shoe structure to each other.

very important in the process self assembly it is mandatory to check the geometry of the manufactured piece of furniture - the diagonal direction must be the same.

On the front of the rack in the form of a dryer, it is necessary to make markings for installation furniture hinges.After screwing them, you need to hang the doors of the shoe rack. Then a place is marked for the installation of decorative elements, if they are provided for by the sketch, and the fittings are screwed onto the doors.

Despite the fact that the dimensions of the product entirely depend on personal preferences and the size of the hallway, the standard distance between the installed mesh shelves should not be less than 30 cm, which will ensure ease of use of the structure. Among other things, shoe shelves made on the basis of metal mesh, will be more convenient if they are installed at a slight angle.

How to assemble a shoe rack with your own hands (video)

Final works

On the final stage The design needs to be checked with building level, as well as, if necessary, sanding and painting if moisture-resistant plywood was used for the manufacture. As practice shows, if there is a need to perform original design spacious hall, it is best to book furniture item, having previously selected the design that matches the style of the room and the optimal configuration.

Attention, only TODAY!

Shelves from furniture stores do not always fit into the required size. Therefore, today we will try to make some original shoe shelves with our own hands.

The simplest shoe rack from old furniture

First you need to cut the boards into blanks. Standard height between shelves - 23 cm. width should be such that both women's and men's shoes fit in it - it should be 30-35 cm. Depending on the number of family members, the size of the shoe and its height may be different. The shelves in it are installed on different height: for children's and adult shoes, shoes, boots and sandals, a large shelf for boots.

Let's say we need to make a shoe rack measuring 100x35x46 cm. For it, we need three side walls measuring 35x45 cm, a top board 100x35 cm and three shelves 47x46 cm.

Shelf 100x35x46 cm

If the surface is too worn, clean first lacquer coating from boards using sandpaper or a grinder with a special nozzle. Since this produces too much dust, it is better to work on the balcony. Damaged places are puttied.

Boards are fastened together furniture corners using small self-tapping screws 12 mm long. Attached to the back of the shelf thin sheet LDVP, which is lined with cabinet furniture.

Shelf fixing

Advice. So that the shelf can be moved close to the wall, at the junction with the baseboards, the lower part of the side walls must be cut at an angle of 45 °.

Shelf made of wood or wooden slats

The principle of making wooden shoes is similar to the previous one. The only difference is in the attachment. To securely fasten the boards together, they are drilled in the side walls holes for inserting screws. The same holes are prepared on the crossbars from the end side.

The screws are screwed into the board in such a way that their hats are slightly sunk into the wood by a couple of millimeters. The holes are leveled with sandpaper and puttied. You can also hide the holes with the help of plastic plugs - they are sold in any furniture store.

To strengthen the product on its rear ends are additionally attached metal corners. Before starting work, small irregularities are cleaned with a grinder, grinder or emery.

Joining bars

Shoe box made of wood

You can darken the tree with a water-soluble or alcohol stains- a dye that gives the tree specific color. You can replace it with a regular potassium permanganate- it paints superbly wooden surfaces. In order for the coating to turn out even, the tree must be slightly moistened before painting. After painting, the product is treated with varnish and dried thoroughly.

Stain processing

Another option wooden shelf for shoes

Advice. Shoe rack can be turned into original ottoman if you beat her upper part foam rubber and covered with a fabric of a suitable color.

Ottoman-shelf for shoes

original round shelf

1. To make a rounded shoe with a jigsaw, you need to cut round blanks. Their diameter should be about 600 cm. You can replace the compass with a nail hammered into the center with a pencil attached to it on a cord. After cutting, the edges are carefully polished with sandpaper or a grinder.

2. Now let's start manufacturing rungs. They will need 8 pieces (4 for fastening between the lower and middle blanks and 4 for installation between the middle and upper). The size of each of these parts is 160x200 mm. After cutting, they are also polished.

3. On the underside of the round blanks, mark the places where the partitions are attached. To do this, draw two straight lines with a pencil at an angle of 90 ° to each other. The intersection should fall exactly on the center of the workpiece.

4. On each line, we drill 4 holes for inserting screws. We prepare the same holes at the ends of the crossbars.

5. Now it remains to fasten the parts together and paint the shelf in any color or cover it with stain or varnish.

round shelf

6. Such a shelf can be made angular, if you use only 1/4 of the rounded workpiece.

Corner semicircular shelf

Hanging shoe rack

To save space in the hallway, shoe racks can be made hinged. Attaching them to the wall is easy. To do this, you need a puncher or drill, anchors (L-shaped hooks), dowels, a screwdriver and the shelves themselves:

Metal suspension (anchor)

In order for the shelves to be located strictly horizontally, we mark the wall using the building level; on the resulting line we place the attachment points;

We drill the required holes in the wall;

We prepare the same holes in the shelf itself;

We insert dowels into them and fasten the boards to the wall.

Advice. It is better to drill at a slight angle to the ceiling. In this case, the fastening will be more reliable, and the shelves will fit closer to the wall.

You can also fix the shelves on the wall using metal profiles.

Shoe rack made of metal pipes and PVC pipes

An original design shelf made of metal and wood can be made in a matter of minutes. For this you will need:

Wooden, stained or painted boards;

Metal pipes;

Angular adapters;

Couplings (when using pipe cuts of insufficient length);

Plastic plugs for legs;

Rust neutralizer.

flanges for metal pipes

First, the metal must be treated against rust with neutralizer (special liquid). Next, the pipes are cut into segments, and metal structure assembled with corner adapters. Pipes are attached to the shelves with flanges. So that the metal does not rust in the future, finished structure can be painted or treated with a clear or colored varnish.

Shelf made of metal pipes and wooden planks

Such a shelf can also be made from plumbing pvc pipes . To do this, they are cut into segments of the required length, through holes are drilled in them for attaching shelves, and corners, tees or plugs (fitting connections) are put on the ends. It remains to cut the boards or fiberboard of the required size and install them on the shelves.

Video: Do-it-yourself shoe rack (shoe rack)

The issue of placing shoes in the house remains relevant both in summer and in winter. Often the hallway is crowded with shoes, especially in evening time when the whole family returned from work, study home. To avoid such a problem, you can make special shelves for shoes in the hallway, which will help not only decide on the issue of storing things, but also decorate the room. Every housewife knows what useful item necessary in the home, since the durability of shoes depends on both proper care and the proper storage that a well-designed entryway shoe rack can provide.

This piece of furniture should be characterized by versatility, compactness, because the hallway usually has a small square. Shelves for shoes in the hallway can be made in various options execution. Among the varieties that you can do with your own hands, the most popular are:

• wall models. Ideal option for small hallway where it is impractical to install a cabinet. It is easy to create such a shelf yourself using wood as a material. If you wish, you can find a lot of photos on the Internet and make the product according to the picture;

• Shelving. The most successful choice for the design of free space. The upper part of the shelf plays the role of a bench or is used as a stand for various useful items;

• Cabinet-slim. Such shelves are practical and convenient, as they hide shoes from prying eyes. Turns out 45 degrees to open. You can make any shelf for shoes in the hallway with your own hands: straight, rounded or corner;

• Stands. The most common type floor shelves. In the manufacture, you can use the usual bottom of a cardboard box, glue it with some material that does not get wet, pour pebbles.

What materials can be made

From a large number various materials you can choose the one that suits your personal preferences and financial capabilities. Among the materials in demand: profile, slats, laminate, metal, wood, even cardboard.

Plywood

Plywood is no less popular, from which you can build a convenient and practical whatnot. This type of shelves is attached to the wall, while occupying a minimum of space, saving the free space of the room. Plywood must be cut into even rectangular pieces, for example, 20x30 cm. The blanks are sanded, and then the assembly of the parts begins. From the sheets you need to form U-shaped structures and invest in each other.

In the hallway you can hang any required amount blocks.

The shelf is attached with wooden pins and pre-drilled holes in the plywood. As a result, the product will take approximately the same form as in this photo:

Chipboard

You can make a shelf for shoes from chipboard. Here it is advisable to make narrow or corner models, with straight or rounded ends.

The process is very simple and looks like this:

Drilling holes in chipboard

This is a very economical and simple option for making a shelf, since the cost of chipboard is very low.

Wood

The tree is considered the most convenient in processing, does not emit toxic substances and is considered absolutely safe.

The tree is the easiest to work with, as it lends itself to various processing processes, and it will not be difficult to find it. A variety of tools are used to process the material:

• plane;
• a hammer;
• paper (machine) for grinding;
• screwdriver;
• saw;
• pencil or tape measure.

Tools needed for woodworking

DIY manufacturing

The easiest to manufacture are shoe racks. They can be easily made by hand using common tools, materials, visual photo for example.

DIY shoe rack

To create such a piece of furniture, it is enough to take:

• 6 wooden bars;
• practical self-tapping screws with a diameter of 3 mm and a length of 25 mm;
• self-tapping screws for wood processing;
• special varnish for coating.

Creating a shelf with your own hands should start with the sides. The depth should be approximately 33 cm, which is quite enough for various sizes shoes. First you need to saw off 6 even bars of 33 cm each. Next, four bars should be evenly distributed on the blank material and cuts should be made corresponding to their depth.

Bars - blanks for the sidewalls of the shelf

The optimal shelf width is at least 62 cm in order to place at least several pairs on one compartment. Each shelf involves the creation of four blanks of a certain length. After that, pre-made blanks are inserted into the finished recesses and fastened together with the structure with self-tapping screws. Do the same with the rest of the shelves, then carefully sand the sharp elements of the side parts with special paper. Each individual shelf will look like this:

Assembly of one section of the shelf

The height of the self-made shelf is approximately 80 cm. The lower part is mounted at a distance of 25 cm from the floor, to accommodate high types of shoes. Racks are made of wooden planks, 80 cm high. To create them, a special cut is made to the thickness and depth of the beam (16 mm) at a distance of 25 cm from each other. At the top, it is recommended to leave 10 cm for the top of the shelf. Four identical racks should be prepared, and then the finished shelves should be inserted into the pre-cut sections.

Connecting sections to each other with sidewalls

This technology can also create wall shelf do-it-yourself, which is especially suitable for hallways with a small quadrature. Ready-made options with photos are easy to find on the Internet and choose the appropriate option.

From the remaining material it is necessary to make the upper part of the shelf. To do this, special blanks of 33 cm are cut out. The top of the bars is carefully cleaned with sanding paper, but if possible, it is better to use a grinding machine. The finished product is covered with several layers of varnish, and parts of the shelf are fixed with self-tapping screws.

It is necessary to use 4 self-tapping screws for each shelf and 2 fasteners for the top.

You can create almost any shoe shelf on your own. There are many photos on the Internet ready-made options, but if you wish, you can experiment and make an exclusive piece of furniture. The main thing is to have a little imagination and all the materials necessary for work.

Unusual shelf for shoes made of plastic pipes