Do-it-yourself roman blinds directly on the window. Do-it-yourself Roman blinds - master class, instruction (photo)

Roman blinds entered our interiors not so long ago. Due to their aesthetics and high practical performance, they quickly took root and became a popular tool in the hands of designers. Do-it-yourself Roman blinds will become not only a barrier from sunlight and prying eyes, but also a decorative decoration. In our article, we have collected material on how to sew Roman blinds. We collected material about what designs are, as well as some patterns and calculation schemes that will help you sew a beautiful curtain for the kitchen.

Do-it-yourself Roman blinds: which design to choose

Roman blinds are beautiful half-curtains that have a device for lifting the canvas up. You can make classic Roman blinds with your own hands, which have a frame. In the unfolded position, they look like straight canvases, and in the raised position, they are wave-like, consisting of uniform folds overlapping each other. There are also frameless curtains. If you lift them up, you will get soft sagging folds of fabric, since they do not have special internal strips that support the shape. Another interesting model is do-it-yourself cascading Roman blinds. In this version, the name speaks for itself - the beautiful uniform bends of the canvas are preserved even in a fully loosened position. They look in a special solemn way, so they often find their application in living rooms.

The use of Roman blinds is very convenient for kitchens. Due to their compactness, they do not take up space, do not interfere with cooking if they are in the cooking area, and also perfectly complement the dining area. A do-it-yourself Roman curtain for the kitchen (see photo below) will look best in the classic version, and in our article we will look at how to make it.

What material is better to sew Roman blinds with your own hands

The color and pattern of the material must be chosen based on the style and palette of the interior of the room. Density depends to a greater extent on the functional purpose of the room, as well as on the presence of long curtains. In the bedroom, it can be thicker do-it-yourself Roman blinds (blackout, jacquard, vinyl, satin) complemented by a lighter long curtain. Translucent fabrics (linen, acrylic, cotton), etc., are suitable for the office.

A beautiful, convenient and unusual solution can be do-it-yourself double Roman curtains (photo can be found in our article), where one fabric is sewn from dense fabric, and the second from transparent (lace, organza or veil). In this case, light material will protect in the daytime from prying eyes, and dense material in the evening from excessive light.
If you sew Roman blinds with your own hands for the kitchen, it is important to consider that the fabric you like is resistant to washing and absorbs odors minimally.

Roman blinds sewing technology and fastening methods

A structure with curtains is installed on the wall in front of the window opening, on each individual sash, or one cornice inside the opening above the frame. Whichever option you choose to make Roman blinds for plastic windows with your own hands, you will need a cornice-mount and a mechanism that lifts the canvas. All this, of course, is on sale, but you can make it yourself, especially since the manufacturing technology is quite simple, you only need a wooden plank, three nylon laces, plastic rings, nails, screws and hooks.

The general technology for sewing Roman blinds involves the following steps:

• preparation of measurements and sketches;
• pattern making;
• the formation of the canvas with the design of the frame;
• design of the lifting mechanism;
• mounting.

As you can see, the process is not very complicated, the main point is to observe absolute accuracy in all works.

Do-it-yourself Roman blinds: taking measurements

The quality of the future product, its appearance in the interior will depend on how accurately the measurements are made. The first step is to take measurements of the window opening. To these indicators we add 3 cm from the sides and 10 cm in the upper and lower parts. It should be noted that if it is supposed to sew a Roman blind with your own hands, mounted on the outer side of the opening, then the canvas will be 6-8 cm wider and approximately 10 cm longer than it. Folds should also be taken into account in the calculations. The gap from one bar to another, as a rule, varies from 20 to 30 cm. For example, if the height of the window opening is 1.5 meters, the distance can be 20 cm, with a height of 2 meters - 26 cm, and for large windows or a balcony door, 2.5 meters high - the distance can be 30 cm.

Draw sketches of Roman blinds. Display on them, as shown in the photo, what kind you are going to sew, the scheme of the lifting mechanism, as well as all the measurements taken. Thus, the sewing process will be much easier. Before you sew Roman blinds with your own hands, consider if you want to use not one material, but several cuts for sewing one curtain. Then additional calculations and diagrams for each part will be required.

Roman blinds: canvas pattern

Based on the created sketches, we start sewing a Roman blind with our own hands from a pattern of fabric, which will occur horizontally with stitches for rack mounts. According to the given dimensions, it is necessary to cut out two rectangular blanks from the fabric and connect them to each other using tailor's pins. Next, we mark the allowances and sew, leaving the top edge untouched. Through it, we turn the product on the front side and proceed to more precise work.

How to sew Roman blinds: we form a frame

The next step, making Roman curtains with your own hands, involves the formation of a frame with slats and a weighting agent. The workpiece must be laid out on a flat surface with the back side facing you. With chalk we draw lines where there will be inserts with slats, we make the corresponding seams, and then we sew strips of curtain tape along them. We insert rods made of plastic, wood or metal with a diameter of not more than 5 mm into the cells. Next, we form the lower pocket and put in it a weighting plank that is several centimeters shorter in length than the cornice (this can be a wooden plank or an aluminum profile). In order to attach Roman blinds to a homemade cornice with your own hands, you need to sew one part of the adhesive tape to the top. The lower part can be made in different styles with the addition of fringe, lace, tassels or piping.

Roman blind with piping

Complementing Roman blinds with your own hands with a bottom edging will be the best way to decorate kitchen curtains. It can be curly or straight, hide in the folded state under the section, or coquettishly peek out from under it (if its dimensions are more than half the section). For edging, you can choose a material that differs in color or pattern. It should be borne in mind that the pocket for the weighting agent is located above the piping. A certain coziness and elegance will be given to the curtains by the side edging, the dimensions of which must be taken into account even when forming a preliminary sketch. Roman blinds with edging in the kitchen will be a spectacular decorative addition to the interior.

The technology of sewing frameless roman blinds

If you want to see just such an option in your kitchen, with smooth curves, sewing a Roman blind with your own hands will be somewhat simplified - there will be no need to design drawstrings for frame slats. The main thing is to make the correct markings for the rings that are part of the lifting mechanism. There should be three of them - one in the center and two on the sides at each level of the intended horizontal fold. Through them, in the future, nylon laces will be pulled, lifting the veil.

Roman curtain in the kitchen: photo of do-it-yourself construction of a web lifting mechanism

The design of the lifting mechanism begins with sewing on the rings. As mentioned above, they must be sewn on three pieces on each bar. Side rings are sewn at a distance of 5 - 8 cm from the edge. To strengthen the Roman blinds with our own hands, we need a wooden bar-cornice, the length of which corresponds to the width of the finished curtain. To its lower part, it is necessary to nail the second half of the Velcro with small nails (the first is on the curtain) and rings to fix the lifting mechanism. The bar itself is fixed at the place of the future placement of the curtain with the help of screw-based hooks and fasteners. Such a cornice can be decorated - painted or pre-covered with a cloth.

To help understand the principle of how a Roman curtain rises to the kitchen with your own hands, video material will help.

We will describe it briefly: a cord is threaded through each vertical of the rings (it must be fixed at the bottom), after which all three ropes are passed through the rings on the bar and go out in one direction. After the last extreme ring, the cords are tied in one knot. Then you can weave a pigtail out of them with a decorative ring at the end, or use the purchased handle for the lifting web.

Roman blinds with their own hands in different styles

Do-it-yourself Roman blinds for the kitchen in a classic style can be made of pastel-colored fabrics, have small patterns or piping. They will look very advantageous accompanied by airy tulle or curtains. Do-it-yourself frameless Roman blinds are also quite appropriate here.

For the Provence style, floral print veils sewn from translucent fabrics are ideal. In most cases, they are an independent window decoration element. Various bows, fringes and tassels may well become worthy decorations for them.

Roman blinds were probably invented by the Romans themselves. The principle of their work is obvious and has not changed for centuries, which is why they remain consistently popular. The design is based on a straight web of fabric, gathered in folds with a cord. Blinds can be designed in different styles, giving the room a strict or playful look, completely blocking out the sun's rays or leaving a pleasant diffused light. An obvious plus of this decor is that it will take one day to make Roman curtains yourself.

Roman blinds can be with or without inserts, with soft folds and with hard inserts like blinds.

A useful feature of curtains that are simple in shape and design is a snug fit to the windows. At the request of the owner, they almost completely coincide with the size of the glass. This provides a reliable way to ensure the darkening of rooms of any size. The whole structure takes up a minimum of space, is extremely simple, almost does not break, and is easily restored. The canvas is removed from the eaves, washed on its own, and from time to time you can get by with dry cleaning with a brush on a long handle.

Modern industry produces a wide range of convenient ready-made structures for mounting any blinds. With purchased roller shutters, the process of window decoration is reduced. Curtains can also be made from improvised materials. Below is a detailed instruction on how to make Roman blinds with your own hands.

Of all the classic draperies, Roman blinds are the most concise and neat, because when unfolded they represent an even sheet of fabric. They remain consistently popular in Italy. When the window is opened, the material folds in large or moderate parallel folds, allowing light to enter. Draperies are created on the basis of several strips sewn into the canvas. For installation, "Roman" cornices are also used, equipped with elementary fabric lifting mechanisms. The level of drapery is fixed using a special control mechanism with a chain. In a simpler version, the cord that supports the folds is simply wound on a small hook in the wall near the window.

Important! Most often, woven blinds are close in size to the window area and do not cover the walls around, so they take very little material for them.

When hanging curtains are placed inside the window opening. There are cases when the curtain is placed outside, the curtain closes the frame itself, as well as part of the wall around it. It is possible to create an expressive ensemble without additional tricks, choosing the texture and colors in an original way. Traditionally, plain canvases are chosen. Try to come up with your own drawing (stripes, flowers, ornaments), apply a photo image, a self-made drawing.

In the classic version, the drapery arrangement model assumes from 3 to 5 large folds formed at an equal distance from each other. The quantity depends on the imagination of the designer. Folds are placed at the bottom of the curtain, then when open it will be half smooth. If you do not use textile tape or rigid rods to fasten the rings, then the gathers will be soft, draped.

Blinds are decorative, functional or combined. The main characteristic is the transparency of the material. According to the degree of light transmission, materials are divided into types:

• "Blackout" - a dark material that does not transmit light. It is mainly used where maximum darkness is needed, in the bedroom, home theater, children's room. The fabric is dense, often natural.

  

  Blackout blackout roman blinds made of blackout fabric

• "Dimout" - translucent materials, but not tulle or muslin. Pass about 30% of a light stream. Good for decor, optimally combined with traditional curtains. Suitable for rooms where people not only relax, but also receive guests, work. Used in the dining room, living room, library, office.

  

  Roman blinds dimout partially let in light, but at the same time do not let in the heat of the sun's rays.

• Completely transparent materials - tulle, organza, tulle mesh. Used alone or combined with other materials. The functional load of such curtains is not great, their main task is to create a harmonious decor, a beautiful interior.

  

  Transparent Roman blinds are very popular due to the fact that they organically fit into any interior.

How to sew Roman blinds with your own hands



Determining the size of the Roman blind, depending on the method of fastening

The first stage in the manufacture of Roman blinds is the measurement of the window. In relation to the length and width of the glass, the size of the canvas will be greater:

• 4 cm high hem plus 15 cm allowances to insert the barbell inside, weighting agent (total 19 cm);
• in width - plus 2 cm, designed for processing slices on each side (4 cm in total).



Open Roman blinds: fabric calculation scheme

For installation of blinds, a rod is prepared or a ready-made roller blind is purchased. A standard round cornice of small diameter (usually they are metal) or a wooden beam with a diameter of 3 cm is suitable. Its length is less than the width of the material by the amount of hem. Using a finished roller shutter, you need to remember about a few centimeters that are needed for the plugs - if they are not calculated, when the window is opened, the mount will break against the wall.



Calculating the number and size of folds for a Roman blind will help determine the best option

The design of curtains, what components are needed for manufacturing

The design of Italian blinds remains as reliable as in the days of the ancient Romans. Innovations concern, first of all, materials, control devices. When making blinds at home, it is permissible to do without the latter. The basis of the design is a bar on which the fabric and cords are attached, which raise it. The rest - the details that are used at their discretion.

Ready-made roller blinds, which will save a third of the total amount of work, are sold in building supermarkets. They are:






The electric cornice is able to withstand heavy loads and is often used on panoramic windows.




Before starting, prepare everything you need: a bar, fasteners, scissors, a screwdriver, self-tapping screws, material and Velcro tape for fabrics, double-sided tape, rings, strips for fixing folds. If the slats were not found, a dense textile tape is suitable, from 3 to 6 cuts (or slats) are needed along the length equal to the width of the finished canvas.



Elements of the Roman blind - pins and rings for the cord of the lifting mechanism

Prepare 2-3 cords to control the curtain, each equal to twice the length of the pattern. Weighting agents are suspended from the ends: jewelry, large beads, tassels, rings. Sometimes a special mechanism is used to pull the cord, which rotates, winding the cord or chain. They are of two types: cord or rotary-chain.

Important! Rotor chain handle curtains weighing up to 7 kg, cord - only up to 4 kg.

Materials and care



We choose the fabric for sewing Roman blinds so that it harmoniously fits into the interior

Depending on how dark it should be when the Roman blinds are closed, the material for work is selected. Most often, various natural or artificial fabrics are considered, but there are also blinds made of paper, plastic, various plates or woven fabrics from any sufficiently elastic material. Materials manufactured industrially are additionally treated with dust-repellent impregnations, antistatic agents, Teflon coating and flame retardant composition.

With self-production, it is easiest to find beautiful natural fabrics:

• wool (with a small percentage of artificial additives so as not to stray);
• cotton, mixed fabrics with viscose;
• polyester;
• nylon.

Important! Fabrics with special impregnations used in production are not washed with a washing machine, they are cleaned with care so as not to damage the outer coating.



An interesting pattern on the fabric is often an important decorative element of Roman blinds.

It is reasonable to correlate the choice of material by composition with the purpose of the room where it will be used. Natural fabrics are good for rooms where children live or people relax. Synthetic options are suitable for kitchens, bathrooms, walk-through rooms - verandas, loggias, corridors, if it has a window or you need to close a niche with something. The design is chosen according to the same principle.

Natural materials without additional impregnations are washed according to the usual rules. Machine wash is allowed if the fabric does not shrink (there are no trims inside). Curtains with complex weaving, pattern, trim are washed by hand, then squeezed very carefully. Dry straightened, immediately hanging them in their proper place. To remove creases, the fabric is carefully ironed, but it is better to use a special steamer.

Step-by-step instructions for beginners on how to make a Roman blind with your own hands

The first stage of work on the manufacture of Italian blinds is the choice of material, the preparation of everything necessary according to the list above. Remember that the instruction recommends making Roman blinds with your own hands from improvised materials.



Materials and tools for making Roman blinds

The second stage - measurements of the window, drawing up a pattern, cutting out the material. If strips are used, then each curtain is cut from two equal panels, if a textile tape is from one. If the fabric has a pattern, keep an eye on how it is positioned.



Fabric marking, pattern with allowances and sewing pattern

The third stage is tailoring. The peculiarity of Roman curtains is that along the entire length of the fabric it is necessary to fix the strips, which, with the help of rings and cords sewn to them, will create folds, holding the fabric up.



We mark the folds of our curtains, we outline and sew

The option of two panels is folded with the front side out, “pockets” for the slats are adjusted, the distance between them is 1/4, 2/4, ¾ of the height. After the edges are processed in a hem, a backstage is made under the weighting agent at the bottom, at the top - a wide fold under the eaves.



In order to make the curtain heavier, we insert a special bar into the gate



Smooth out folded edges

If the canvas remains single, then a textile tape is adjusted on the back side (according to the same scheme as above the pockets for the straps). Rings are sewn to the tape for cords along the edges or 10 cm from the edge, as well as in the middle. If the curtain will be fastened with a Velcro tape, then it is adjusted along the upper edge.



We fix the Velcro tape on the cornice



We sew the second Velcro on the upper wrong side of the curtain and fix it on the cornice

Important: if the fabric is not very thick, then the edges can be folded and fixed with an iron, laying a sewing adhesive tape along the fold.

The fourth stage is the installation of a roller blind or cornice. The finished roller shutter can be glued to the frame with mounting tape. On a homemade wooden plank, first one side of the Velcro tape and the ring for the cords is strengthened, then mounted on self-tapping screws.



Plastic rings are placed from the inside and sewn by hand

The fifth stage - the cords are pulled through, the curtains are hung on the Velcro tape. It is simply attached to the finished roller shutter according to the instructions (for different manufacturers they may vary in accordance with the design).



When all the cords are threaded, we will pass them through the upper attachment rings to one side.

Important: on the side where the end of the cord that lifts the canvas is brought out, it is worth fixing a hook on the wall for which this control will be attached.



A simple DIY roman blind

Roman blinds made of dense heavy materials, especially when large, are best hung on an industrial-made roller shutter with an electric drive system. It will cost more, but it will last longer, and using such blinds is more convenient. The mechanism can be opened and closed remotely.

Roman curtains for the kitchen with their own hands

One of the most popular places to use Roman blinds is in the kitchen. Thus, the window sill is freed and turns into an additional workspace or a place where decorative plates, a vase or something else is placed. Short blinds in the window opening get dirty less and do not accumulate dust. They are easy to clean with a brush. Teflon-coated materials are very good here, but they are not easy to find on sale. The easiest way to do this is through an online store.

Important! When purchasing materials with special impregnations, ask the seller for a hygiene certificate.

Dense, opaque curtains are not needed in the kitchen; light and translucent ones take root much more often here. They make the room visually more spacious, saturated with air. In the kitchen, there is no need to create a good darkening, so they use light shades, mesh in combination with trim, non-woven materials. They come in three degrees of transparency:

• transparent up to 80-90%;
• translucent;
• about 70% blackout.

It is in the kitchen that designers like to use curtains with photo prints or large drawings. The choice of topics is wide: from classical checks and stripes, to real photographs of vegetables, fruits, dishes or reproductions of picturesque still lifes.

The scheme of the Roman blinds, design details with a photo for beginners

Roman blinds work in the same way as yacht sails. They are pulled up with the help of "rigging" - ribbons, chains or cords. When the length of the tape is chosen, the fabric is gathered into folds, which are evenly shaped by rigid strips sewn at an equal distance from each other. When the tape is free, the matter completely closes the window.

Roman blinds lack what sets them apart from more modern roller blinds: side rails. These elements would not allow the fabric to gather into folds. However, if it is very thin, then the side seams are reinforced with ordinary textile tape.

If you do not use slats or a rigid textile tape when making your own blinds, then the folds will turn out to be cascading, soft and plastic. Then the layout of the rings through which the ribbons pass to raise the curtain will change. They are not sewn along the edges of the canvas, but closer to the middle, so that the folds are more interesting.

Please note: Roman blinds never fully open the window.



Roman blind pattern with measurements

For those who first decided to make Roman blinds on their own, the main recommendation is to boldly take on the job without fear. The query "do-it-yourself Roman blinds step-by-step instructions" will give you a lot of advice on this topic. It is worth dwelling on the most understandable design, for a start, purchase a finished roller shutter. It is glued with mounting glue or tape to the frame, saving yourself a lot of work.



The scheme of cutting fabric for Roman blinds

Important! The materials should be chosen the most simple, already familiar, so that in the future you do not have to think long about how to clean them.

Remember that stains on the fabric are best removed immediately, without allowing them to soak and dry - then washing will become noticeably easier. Also, do not buy expensive fabric for the first experience. Over time, inevitable flaws will become noticeable, and you will want to redo everything anew. Prepare in advance to part without regrets with your first prototype.

When cutting the fabric, make sure that it does not warp. Check the direction of the base - if you cut the rectangle along the oblique, then the canvas will hang obliquely, even if you carefully observe all right angles. The easiest way is to make curtains out of paper - at least costs, less work, then very soon you can replace it with something more interesting without regret. At the same time, the fastening mechanism is retained for further use.

Conclusion

Roman blinds are very simple, they are created by oneself, but they require accuracy and care. They last a long time, they are easy to care for, but at the same time they are easy and quick to replace. This is a great option for those who like to often make small but pleasant changes to the interior.

Video: Do-it-yourself Roman curtain

Roll-up Roman blinds are popular among connoisseurs of modern and stylish window decor. They come in various sizes and colors, and delight buyers with all their qualities except for the price, but this is not a problem for those housewives who love and know how to craft.

It turns out that it is not very difficult to sew Roman blinds with your own hands, the main thing is to be patient and have the necessary materials. How to make them we will tell in this article with a detailed master class. Of course, you can make an order for sewing curtains in the atelier, but the things that we ourselves do for our home carry a special, positive energy. Do not be lazy and read the article carefully and to the end, and then you can create your own masterpiece.

How to take measurements correctly

At home, making Roman blinds is not so difficult, the main thing is to choose the right material and make accurate measurements. Measurements also affect the amount of fabric needed. So, Romans can be installed both inside the opening and on the wall above the window. We measure the height and width of the window where the curtains will hang and add 5-7 cm to the sides, and about 10 cm at the top and bottom to fix the weighting agent.

In order for the folds to be even, and the distance between them the same, you need to calculate it correctly. To do this, use the approximate calculation table. We determine the number of folds by eye, divide the height of the curtain by their number and get the distance between them, it should be no more than 30 cm.

Table of approximate calculations of the number of folds on the curtain and the width between them

What may be needed

To make Roman blinds will help the necessary materials and tools that you will need to buy in advance, and perhaps something from the list will be in your home.

• Fabric, thread, scissors, needles.
• Roulette for measurements and cutting.
• Wooden or plastic slats weighting agents.
• Velcro tape for fixing the canvas on the eaves.
• Rods made of wood, plastic or metal that will pierce the curtain and form folds.
• Plastic rings, they should be at the rate of two or three rings per twig.
• Nylon cords: 3 pieces, 2 of which are twice the length of the curtain, the third is the length plus the width.

Step-by-step instructions for making lifting curtains

Now that everything is ready for the independent production of Roman blinds, you can safely start sewing. A detailed step-by-step instruction accompanied by informative photos and videos will help you with this.

1. Take measurements of the window and buy the required amount of fabric. You can sew your curtains in one layer of fabric or two. It depends primarily on the density of the fabric, if it is thin, then it is better to sew a double fabric. Then the material will need twice as much.

2. Calculate the number of folds according to the height of the opening to sew curtains that fit your window.

3. Cut out the product as shown in the photo. Don't forget to leave allowances for finishing the edges. There should be a large allowance at the bottom, as this will later be a pocket for the weighting agent. From the inside, mark the places where the rods will be inserted and the plastic rings will be attached.

4. Cut out the workpiece and process the edges with a double hem. You can also use adhesive tape-spider web, which glues the fabric with a hot iron.

5. If you have a double curtain, then fold the two parts right sides inward, sew them, leaving one edge unsewn.

6. Now you need to make special drawstrings for inserting frame rods. To do this, you will need specially cut strips of fabric or a ready-made edging braid. We sew it like a pocket on three sides, leaving one unsewn so that the pins can be easily removed before washing. The twigs should be smooth and easily gliding over the fabric, so it is better to choose them from plastic or metal.

7. Having marked the location of the rings, sew them to the pockets by hand, they will serve as the basis for the lifting mechanism. Attention! There should be as many rings for threading cords as you see fit, but at the same time the curtain should rise easily.

8. Sew one part of Velcro to the top edge, and glue the second to the future cornice.

9. Tuck the bottom edge so that you get the same backstage where the weighting rail will be threaded.

10. Thread the cords into the rings from the bottom to the top, bring them to the outermost ring with the shortest cord. Tie all the cords into a knot, and roll up the curtain itself and tie it with ribbon.

11. Fix the cornice in the form of a plank to the frame or wall above the window, depending on where you planned to hang your DIY roman. On plastic windows, if the curtain is attached to the frame, the cornice can be hung using double-sided tape.

12. Hang the Roman blind on the cornice with Velcro. Remove the tape and adjust the level of tension of the lifting cords, check the operation of the mechanism. Tie the cords into a knot at the top and bottom, trim off the excess edges. To keep the curtain at the right level, you need to fix the cords on the side of the wall hook.

Turning old blinds into roman blinds

Plastic blinds have been out of fashion for a long time, many had them on the windows at a certain period of time, and they always broke quickly. So if you or your relatives have such unnecessary blinds, then you can give them a second life by turning them into homemade Roman blinds.

How to make Roman blinds from old blinds, you will learn by reading the detailed description.

1. As in the previous case, we take measurements of the window, note that the width of the curtain will be like that of the blinds, but the length can be the one you need.

2. Cut out the cut part and process the edges with a hem with a stitch or with the help of an adhesive tape. Here, large allowances are not needed on the bottom edge, since it will be tucked up and glued to the bar. We sew the product slowly, taking into account all the nuances.

3. Blinds must be rid of unnecessary slats, leaving as many folds as planned. To do this, you need to remove the blocking lock from the cords, untie all the knots and remove unnecessary straps. They will need about 6-7 pieces, depending on the height of the window. Cut off excess ropes.

4. We tuck the upper edge and sew one part of the Velcro onto it. The second is glued to the eaves of the blinds.

5. We apply glue along the marked lines and glue the lamellas to the Roman, fold the lower edge and also glue it to the weighting agent. Remember: the distance between the lamellas should be the same.

6. We hang the finished product on the window opening. Check the serviceability of the curtain lifting mechanism and enjoy the novelty of decor in your home made by yourself.

Decorate the top and bottom edges

So that your Roman curtain does not look boring and monotonous, we suggest considering several ways to decorate it. So, the upper edge can be decorated with a traditional lambrequin. Moreover, it can be both hard and soft, both with a straight edge and with an oblique one.

To make a solid lambrequin with your own hands, you will need a rigid base, it can be in the form of thick cardboard. We make a decoration pattern, keep in mind that this type of lambrequin should be long and completely cover the upper part of the side edges of the Roman canvas. We cut out the blank, with the help of glue we plant the fabric on a cardboard base of the same shape. Let the designs dry. To install a Roman blind with a lambrequin, you will need a special double cornice, which you can make yourself or order in a specialized store.

With a soft lambrequin, things are easier. Its production will not require much effort and time. To do this, first decide what shape it will be, perhaps even from another similar fabric. You can make a simple pelmet in the form of a long flounce along the entire width of the curtain. Or it will be a decor in the form of a strip of fabric hanging beautifully in the center, and its edges on the sides. In general, your imagination is not the limit and you can come up with a completely extraordinary way of decorating.

It is more customary for us to decorate the upper part of curtains of any type, but everyone forgot about the lower part, but we didn’t. That is why we will tell and show in the photo how to do it beautifully and tastefully. For a rustic-style kitchen with the presence of strict Roman curtains, which you even sewed yourself, a certain cold appears, and to melt it, decorate the bottom edge of the canvas with romantic wide lace or a flounce from the same fabric. Tassel fringe is a great way to spice up the traditional look of a curtain wall to your surprise.

Why Housewives Choose Roman Blinds

The unique way of decorating a window has been known since ancient Rome. They have gained their popularity these days as sewn Roman blinds on their own, as well as ready-made from the manufacturer. But why are they so loved? How did they manage to get ahead of traditional plastic blinds? Let's figure it out.

• Roman blinds are suitable for small rooms and equally small windows.
• They take up little space and allow you to use the window sill to the fullest, unlike the classic long curtains.
• Easy to care for: do not require frequent washing and are suitable for dry cleaning with a cloth and a vacuum cleaner.
• They free up the approach to the window and make it possible to put a sofa or bed near the window, when this causes inconvenience with long curtains.
• Easy to hang and take off.
• Economical for self-manufacturing, as they will take less fabric than ordinary curtains.

As you can see, there are no obstacles to sewing Roman blinds with your own hands, so feel free to get down to business.

The best fabrics for roman blinds

Tailoring Roman blinds should begin with the choice of material. Absolutely any fabric is suitable for their manufacture, both very dense and light veils. But still, it is better to give preference to denser materials, as they will be able to emphasize all the beauty of symmetrical folds, and when lowered it will be a smooth, heavily hanging canvas. From specific fabrics, we can distinguish dense and translucent cotton, linen, heavy satin and jacquard.

In order for a do-it-yourself Roman blind to be not only beautiful, but also functional, it is very important to decide how much your room needs to be darkened, or you want the curtain to be able to transmit light well. It all depends on the fabric. To keep the room bright and protected from the scorching rays of the sun at the same time, choose light fabrics that are dense in texture. Translucent Romans at the same time protect the room from prying eyes and let in the necessary light.

For complete protection against fading and simply annoying rays, we recommend choosing a unique material with a blackout effect. Its reverse side is impregnated with a special solution that protects not only the curtains themselves from fading, but also the walls with furniture.

For the living room and bedroom, the choice of fabric is not difficult, here it can be different. But the kitchen will require a material with special properties. After all, no matter how hard you try, random stains, ingrained odors and soot are inevitable. Therefore, here is the place for practical and wear-resistant materials. Manufacturers took into account all these nuances and created a wonderful fabric special for kitchen curtains. Basically it is polyester with water-, dirt- and fire-resistant impregnations.

The color and pattern of the fabric you choose for Roman blinds should match the entire interior. Plain materials are the most versatile, they are suitable for any environment, but when choosing a patterned fabric, pay attention to whether you have such colors in your everyday life or where else you can repeat them. Pay attention to the choice of invoices. For a modern style, smooth fabrics are the best choice, while for frilly baroque and empire prints, printed patterns and voluminous embroideries are incredibly good.

As a fix, we suggest watching a video on how to make Roman blinds with your own hands.

A device called "Roman blind" illustrates the saying about the simplicity of genius. A convenient fixture fits perfectly into a modern interior - the laconicism of its aesthetics allows the Roman blind to match any style.

INTERESTING! Since the time of Ancient Rome, when ancient designers thought of a convenient device, the appearance and design principle have remained virtually unchanged. Another proof of the well-known practicality of the ancient Latins!

Their layered design allows you to decorate any room - from the nursery to the balcony. Looks great in the kitchen too!

Advantages

The main advantage of curtains is the ability to have free access to the window sill and open the window when the curtains are closed. In hot summer, this will help to make the room cooler: both air access is provided and hot rays do not penetrate.

Budget is another obvious advantage: once you have spent money on a special mechanical cornice, all that remains is to change the strip of fabric attached to it.

ADVICE! A set of curtains according to the seasons will allow you to create a special atmosphere in different seasons - golden leaf fall, blooming or spring greens can be reproduced right on the window. And specially sewn with your own hands "New Year's" curtains will make the house festive for a few magical weeks.

disadvantages

They only concern the care of such products: it is not difficult to wash them, but preparation for washing will bring some troubles: you will have to remove the weighting agent and straps from the pockets yourself, and then fill them back yourself.

There is also a problem that has become a side effect of environmental friendliness: the natural fabrics used in the tailoring of Roman blinds tend to shrink, and you can’t curtain a window like that.

ADVICE! Washing in the hottest possible water before cutting the fabric will reduce the severity of the problem. Then the future curtain must be thoroughly ironed. Subsequently, it will be possible to wash in a more gentle mode: the main shrinkage will occur during the first wash.

We sew Roman blinds

The simplicity of adapting a Roman blind allows it to be designed correctly even by an inexperienced seamstress.

What you need

We will proceed from the classic size - 160 cm along the product and 60 cm across (special window sizes require adjustment of the averaged parameters). Let's cook:

• the piece of fabric you like (previously seated!) 165x65 cm in size, taking into account the processing of the edges;
• two and a half meters of braid for decoration or ribbon;
• vecro tape (Velcro);
• threads and needles;
• scissors;
• sewing machine (in its absence, it is easy to handle manually);
• a special kit with a cornice and weights (sold in stores or ordered online).

ADVICE! With a lack of funds for a special device and a minimum of ingenuity, you can build a cornice from wooden slats and rings from obsolete bras - there are a lot of instructions on the network on the topic “Your own master”.

What is the best fabric to choose

There are special requirements for the choice of material: it must be resistant to fading. Best of all in this proved to be special fabrics for curtains. Works well as a fabric for satin curtains.

It does not matter if the fabric is sprinkled: the edges will still be processed. Density and coloring are a matter of taste and compliance with the design of the room being decorated.

Process step by step

1. We begin to form the product: to calculate its width to 60 cm (focusing on the dimensions of the cornice), add five centimeters (2.5 cm each on the left and right). We also increase the length by the same amount: 3.5 cm under the bottom, where there will be a pocket for the weighting part, the rest will bend at the top.
2. We decorate the edges along the length: we tuck it two times (“sewing” the strip to the prescribed 60 cm) and sew it.
3. Now we tuck the bottom, forming a pocket. To control the length, we measure the fabric - it should be at least 161 cm.
4. Tucking the top edge, sew on the adhesive tape.
5. From the cornice set we take out the separator strips (4 pcs.). We cut off four pieces of braid 60 cm each (taking into account the bending of the sections, which we immediately sew up).
6. We measure five even parts for folds on the curtain. In the places of the “border”, we sew the braid with two lines (from the inside of the curtain, having previously drawn the basting lines). We get pockets where the straps are inserted.
7. At the bottom of the curtains we measure and mark on the left and right on the braid and pocket 12 cm from the edge. We sew rings here for regulating the folds of the cord.
8. We are looking for guide parts for the cord on the cornice, fasten them at the same 12 cm from the left and right edges and fix them with the screws included in the kit (firmly!).
9. We put the curtain inside out and attach it to the eaves.
10. Having passed the cord through the rings, on the last one from below we knit a strong knot near the weighting agent.
11. We insert the weighting part into the pocket, and the straps into the sewn-on braid.
12. We are looking for fasteners in the kit and install (a click should be heard). Now we try on the entire structure on the window, marking the attachment points with a marker.
13. Having put aside the cornice with a curtain, we mount the fasteners. Now you can fix the cornice already in its permanent place - you're done!

Having installed the curtain in the right place, experiment with its levels, just slightly pulling the cord over you - the light in the room will be adjusted according to your desire.

Pockets can be sewn on one side, although the straps will “sit” quite firmly inside. It is better to leave the second end unsewn - for the convenience of removing the slats and weighting agent when leaving.

Does the curtain seem too laconic? It is quite compatible with more familiar curtain models - curtains or tulle. Feel free to use decorative elements - colored cords with bright

tassels, ribbons in contrasting colors, bright edging. The lace fabric will help to combine two styles - antique and Provencal, and the print with arabesques and oriental cucumbers will give the bedroom a seraglio atmosphere.

ADVICE! There is no need to supplement a curtain of bright colors or a catchy pattern with an excess of decorations - it will turn out clumsy.

A little imagination - and you are your own designer! Isn't it a good start for learning a new activity?

To create such a product, you will need: simple tools, a suitable piece of fabric, several inexpensive frame parts and a lifting mechanism. Knowledge of the correct algorithm of actions will be useful. You will find all the information you need in this article. Here is information on how to make high-quality Roman blinds with your own hands. Step-by-step instructions and photos with detailed comments will help eliminate errors.

Read in the article

Features of sewing Roman curtains with your own hands

As reported in various information sources, these products copy the sails and their lifting mechanisms. Be that as it may, in fact, it turned out to be a really convenient design.

The main advantage is the economical consumption of fabric. The opened cloth completely closes, without forming folds. As can be seen from the working diagram, it is unlikely that significant difficulties will arise during cutting and sewing. In this case, it is enough to study stitches along straight lines, other elementary technological operations. Simple accessories for stiffeners and a lifting device can be purchased at any.

Technologies for the creation, installation and operation of products

At the first stage of the project implementation, the parameters of the terms of reference are specified. The purpose and features of this type themselves should be taken into account:

• In the open state, they are able to demonstrate the applied pattern without distortion. This means that you can use high-quality pictures in the right resolution for decoration.
• Rational use of materials allows you to pay attention to more expensive types. The difference compared to some other species can be more than 200%.
• Depending on the need, materials with different transparency are used. For maximum darkening of the room where the home theater is installed, products of the BlackOut series are used. Such materials are impregnated with a special composition, or a combination of two types of fabrics is created.

Article