Tire puffs. Do-it-yourself ottoman from a tire

Tires that are out of use have found wide use in the subsidiary farm. What skillful craftsmen just do not invent: flower beds, and crafts for decorating a personal plot, and children's swings. Another option is to make an ottoman out of a tire with your own hands. Practical and creative! Such furniture is useful not only in the country, but also in a city apartment. So, do-it-yourself ottoman from a wheel: features and a detailed master class.

Handmade furniture is always appreciated. Often it can become the main decoration of the house, because in the manufacture of each master puts his soul into his product and applies an individual approach. In addition, no special skills or expensive materials are required for work. Often used wheels are simply thrown away as unnecessary. But it turns out they can be given a second life!

It is quite comfortable to sit on such an ottoman, as it is stable. In addition, it can be used as a coffee table. Such ottomans will look great in the gazebo, on the veranda or in the hallway. As you can see in the photo, they look quite original. There are at least three ways to make such unpretentious furniture.

First way

Pouffe from an old tire (option 1)

You can make a pouffe from one wheel, but it will be a little low for an adult. Therefore, we suggest trying to connect two tires together. To work, you will need the following tools:

• jigsaw;
• screwdriver;
• file;
• construction stapler;
• scissors and knife;
• pencil or marker;
• screws.

From the materials you will need two tires, plywood, foam rubber for gaskets, fabric for sheathing, a belt or hose. Wash the tires thoroughly to keep them clean. On the one that will be the top, we cut out four small holes for further fastening the seat.

Holes for attaching the seat

You can connect the wheels to each other using screws.

Connecting

The seat is made from plywood. Draw a circle on the sheet - the same diameter as the tire. Then cut it out with a jigsaw and finish the edges with a file.

Cut out the base for the seat

Make a round pad out of foam rubber.

Foam pad

Upholster the seat with a fabric, fastening it to the plywood with a stapler on the reverse side.

Cloth covered

Use a strap or hose to secure the seat.

Temporary fixation

Attach it with screws to the top wheel.

Mounting the seat to the tire

The rubber part can be painted in your favorite color. This is one of the options for making an ottoman from a tire. As you can see in the photo, it looks quite original.

Second way

Pouffe from an old tire (option 2)

There is another method - using a rope. You will need:

• jigsaw;
• screwdriver or screwdriver;
• scissors;
• glue gun;
• self-tapping screws;
• thick twine or hemp rope;
• upholstery fabric;
• brush.

Necessary tools and materials

In this case, we cut out two circles from the chipboard sheet and attach them with self-tapping screws on both sides of the tire.

Fixing the plywood circle

Then you can start decorating the future pouf. To do this, use a coil of rope. You need to start from the center of the upper circle. Using a glue gun, the rope is fixed in a spiral.

Cover decoration

When the cover is ready, proceed to the sides of the wheel. In the same way, we wind the rope in a spiral. You need to work carefully, tightly pressing the new coil to the previous one. We leave the bottom as is.

Side decoration

When the twine seizes, that is, the glue dries well, we cover the ottoman made of tires with a colorless varnish.

For reliability, it is better to apply several layers. This will protect it from moisture and dirt, which will facilitate further care of the product.

Lacquer application

Such a do-it-yourself tire seat looks beautiful in an eco-style room.

Third way

Pouffe from an old tire (option 3)

If you do not want to mess with the rope, it does not matter. To quickly make a seat, you can simply place an old pillow inside the wheel. In this case, prepare also:

• foam rubber;
• fabric/mesh;
• lace or fringe;
• thick threads for sewing;
• self-tapping screws.

If you want the pouf to be as high as a chair, use two wheels. Connect them together with self-tapping screws. Cut out a rectangle of foam rubber large enough to wrap around the wheel. Sew along the edges. Thanks to this, the frame will become soft and beautiful.

Cover the top of the frame with a dense fabric, and put a circle of foam rubber on top. Then sheathe the seat with one piece of upholstery material, and the side part with the other. Use strong thread. You can decorate the product with lace, fringe or other decorative elements. Look at the photos of such products and borrow the idea.

And one more thing: so that the furniture can be easily moved around the room, you can attach handles to it. An old belt will work for this. Make loops out of it and attach with screws to the frame. Thus, you have learned how to make beautiful puffs out of tires in three ways.

There are different ways to equip "your" suburban area. Of great interest are the ideas of creating original items from old things that have served their intended purpose.

Craftsmen make furniture from wooden pallets, polypropylene pipes, plastic and wine bottles. New applications are also found for old car tires. They make armchairs, tables, ottomans and even sofas. Practical and durable furniture is used in the garden, for arranging a garage, as an unusual accent in the interior.

Tires can be used uncoated, but more often they are dyed in bright colors, wrapped with jute, sisal, linen, cotton or hemp rope, and pulled with cloth.

Car tire rubber contains toxic substances, so do not use it in a child's room or in a poorly ventilated area. But even without this, there is enough space for improvement: in the living room of a private house, on the terrace, in the garage and utility room, in the open air.

Low ottomans for the garden and home: soft, comfortable and practical

The simplest thing that can be made from used car tires is comfortable ottomans for relaxing and gatherings with friends. They can be in the form of "pills" covered with a thick rope or with fabric upholstery on legs. Consider several manufacturing options.

First, the tire is cross-wrapped diagonally with a thick cord to block the through hole. Then completely cover the circumference. To do this, the rope is twisted in a spiral, starting from the center of the hole blocked by the cord. The rope is fastened with a glue gun.

In another version, 2 plywood discs of the appropriate diameter are used to close the holes in the center. They are attached with screws. Next, the structure is wrapped with a thick rope, fixing with hot glue.

You can make a soft ottoman in fabric lining. To begin with, blanks are made from plywood sheet to close the holes. Then a foam strip is glued to the side of the tire around the entire circumference.

Using a screwdriver, screw the plywood disk from below. Next, they cover the tire with a dense cloth, fastening it with a construction stapler. Legs or wheels are screwed to the bottom plywood.

The remaining disk is wrapped with foam rubber and covered with a cloth. The resulting cover is placed on top. It can be fixed with glue.

From several fabric-covered ottomans you can make a cozy seating area.

High pouffes in the dining area of ​​a private house

Two tires are connected with bolts or screws from the inside. Next, the structure is painted or left as is.

A wooden circle made of MDF or chipboard is nailed on top, which is also painted, and soft bedding is laid. Also, a wooden circle can be covered with foam rubber and fabric.

An excellent set will turn out from high poufs and a table. The table is made according to the same principle, only its height is twice as large. A casual white paint job while maintaining a contrasting black tread pattern gives the furniture a stylish look.

Small-diameter tire storage boxes

Wide tires of small diameter are suitable for making designer boxes for needlework and storing small items. Their manufacture is similar to the creation of ottomans, only in addition to the outer skin, they also pay attention to the interior decoration.

Monochromatic fabrics are used for interior design, and bright fabrics with patterns and colors are used for external cladding. Such cute interior items will be a good idea for a business.

Armchairs with wicker

Instead of simple poufs, you can make chairs with a back and armrests. The backrest rail is also attached to bolts or self-tapping screws. Armrests can be made from strong, thick, varnished branches. When the structure is assembled, proceed to close the holes in the center.

In addition to the methods already listed, weaving can be used. To do this, holes are made in a circle with a drill in increments of no more than 5 cm (more often). Later, a strong rope or cord is threaded through the holes with an awl, interlacing each longitudinal row with the transverse ones. You can experiment with the pattern, especially if you have weaving skills.

Bent steel tubes can be used as armrests. And for weaving instead of rope - soft wire.

You can make a bench out of single chairs by connecting two sections with a common wooden frame.

A few more original ideas for making chairs and a sofa

From tires and improvised materials, you can make spectacular designer furniture. Here are some proofs.

"Auto"-chair of 4 tires on a metal or wooden base. In the manufacture, the techniques already described above are used. All elements are connected with bolts.

Low armchairs on legs with a soft back in the Art Nouveau style will perfectly fit into the interior of a spacious living room. For manufacturing, one tire is cut in half in diameter. This part will serve as the back.

A strip of thick foam rubber is glued inside. In order for the back to be beautifully raised, two slats-racks are nailed in the center.

For the seat, a wooden disk is cut out, sheathed with foam rubber. Then the entire foam rubber is covered with leatherette. Screw the back and seats and the chair is ready!

The next option is done in a similar way. Only for the back is taken a wide tire, which is attached closely, without rails.

For a chair with a high back, thick wooden slats will serve as a support, which are covered with a piece of foam rubber and covered with fabric. As a result, a brutal basis is not even guessed in the product. Everything looks elegant and stylish.

For the garden, a chair with a wooden back is left unupholstered. Even without painting, it looks very aesthetically pleasing.

As a backrest, you can use several tires interconnected and placed on edge. They can be attached to the tire serving as a seat using cables or elastic springs. Further tricks for converting waste material into a comfortable resting place can be suggested to you by fantasy or our good example.

Another interesting option for a chair for a private house from a large tire. In this case, a segment is cut out in the tire, a soft seat is arranged below, and the inner walls are sheathed, and they serve as a back. A stylish combination of materials and a selection of trendy prints will allow you to get an excellent youth chair for watching TV.

The sofa will require tires from a car and a micro truck. Solid tires are used for the base, and cut-off sectors for the back and sides.

As a lining, you can use eco-leather or coarse wear-resistant fabric. Such a sofa can be placed in the garage or on the spacious terrace of a private house.

Round coffee tables

Tires are also used to create an unusual coffee table. There are many ideas: on wheels, with or without legs, with a glass or wooden surface, painted or natural.

The version with a gold-plated finish on chrome-plated legs and a glass top looks harmonious if it fits into the color background of the interior.

The option with a wooden top and wenge-colored legs is perfect for a classic style. The legs are screwed to the lower wooden disk, and the table top is fixed with hot glue.

Non-standard solution for the bathroom

The rail can also be used as a base for a round sink. Thus, you can equip a bathroom in a private house or an open washstand in the country.

The selected ideas demonstrate the breadth of the use of car tires in the creation of original furniture for the home and garden. Having mastered the basic principles, you can develop your project and surprise with new ideas.

Welcome to the site of handicrafts and needlework. Today we will describe how to create a creative puff with our own hands from a car tire, thick rope and plywood.

The idea is very simple, but at the same time very useful and versatile: it is comfortable to sit on it, the ottoman can be used as a coffee table.

We have already written how car tires can be used: creating flower beds in the country, and in this case we will use car tires more practically. A pouffe made in this way can be useful not only in a summer cottage, but also in a city apartment, in a cafe, at a picnic.

To make a puff from a tire, you need:

• car tire,
• thick rope,
• 2 round pieces of plywood 55 mm,
• upholstery fabric,
• glue gun,
• scissors,
• self-tapping screws

Tools: drill, screwdriver or screwdriver, jigsaw.

Let's start making a pouffe

First you need to prepare the tire itself, for this you need to wash it and wipe it dry with a rag or let it dry in the sun.

We install the plywood circle on the tire and screw in 4-5 self-tapping screws along the radius of the tire (the screws must fully enter the tire). For convenience, you can pre-make holes with a screwdriver. We do the same actions by turning the tire over to the other side.

Next, let's start decorating our ottoman with a thick rope. With a glue gun, we begin to fasten the twine, starting from the center of the plywood circle. Further in a spiral, we cover the entire tire. We do not touch the bottom of our ottoman, and leave it as it is. If there is an extra piece of rope left, then simply cut it off.

You can apply a colorless varnish to an already finished ottoman, which will reliably protect it from contamination. You just need to apply it in several layers for the best effect. After waiting for the previous layer to dry, apply the next one.

We are waiting for the complete drying of the varnish, we can use puff from car tires by appointment. And using your imagination, you can come up with a lot of appointments for him.

Read more interesting things on our website. We are always glad to see you!

To create comfort in the house, you do not need to pay money. You can make beautiful things from improvised materials. For example, make an ottoman from old car tires. It does not require much effort and time, but the product will delight for many years. The pouffe is useful in the country, in an apartment or in a garage.

Materials and tools needed to create an ottoman from a tire

1. Tire - 2 pcs. You can build a base from one tire, but it will be low. If the product is made in the nursery, 1 piece is enough.
2. Drill - come in handy to drill holes.
3. Plywood - the thickness should be within 3-5 millimeters. It will make an excellent seat. If necessary, it is recommended to make a base for a pouffe, and a tear-off top, then things can be folded inside.
4. Furniture glue - needed to fix the foam rubber and material.
5. Furniture stapler - necessary to secure the material.
6. Foam rubber - for stuffing the seat.
7. A piece of fabric - for the upholstery of the product. The fabric is better to choose dense and several colors.

How to make an ottoman from a tire with your own hands? Additional materials:

• Jigsaw, lightning;
• Loops for a cover;
• self-tapping screws;
• Bolts (wire).

Plywood is cut according to the diameter of the tire. If desired, you can process the edges with a jigsaw. Polyurethane foam is laid on top and fixed with glue (when used, polyurethane foam will not slide to the edges).

For aesthetics, a cover for the lid is made of fabric. The pattern is simple: we measure the height of the resulting seat and the diameter. From the material we cut out two circles and a ribbon (the width will be equal to the height, the length will be equal to the diameter). On a typewriter, we sew circles with a ribbon, leaving room for a zipper. Put on a seat cover.

TIP: you can simply upholster the lid with a cloth and secure with a stapler. It is recommended to close the back of the top of the ottoman with a non-woven fabric.

Tires are fastened together. Holes are made with a drill, you can fasten with bolts or wire. For beauty, it is advised to sheathe the rubber with cloth.

TIP: another way to hide tires is to carefully wrap the product with a rope, fixing it with glue. The option is more suitable, with one tire. If there are two wheels, you can first wrap them with fiberboard or thick cardboard from boxes.

To make an ottoman out of a tire with your own hands, it is recommended to sheathe the lower platform (chipboard swells from moisture, the fabric serves as protection). If desired, you can fix the legs or rollers. Then the part is attached to the base with bolts or wire. We connect the lid to the base with the help of hinges (it will open).

The pouf is ready to use. Creative individuals can spend a little more time to make the furniture more beautiful.

How to decorate the finished product

1. It is necessary to take a bright plain fabric of several colors, cut out flowers or other shapes from it. Attach to the pouffe with glue.
2. Old beads, coins, flat plastic figures are taken and glued to the product. For reliability, the decor is varnished.
3. You can sew on cute pockets.
4. Lace is useful, it is sewn over the base on a plain material. You can apply paint to the fabric and remove the lace. It is also recommended to apply any forms through a stencil.

Good afternoon, dear subscribers of the construction portal - site. With this lesson, we continue step-by-step guides aimed at improving the suburban area, as well as its design. Today we will analyze how to make an ottoman from tires with your own hands.

Tools needed to create an ottoman

Step-by-step instruction

1. First of all, we cut a sheet of our plywood based on the contour of our tire and make a round sheet, after that we drill holes in the tire and plywood to fix and connect the tire and plywood.

   

2. Further, using self-tapping screws or bolts, but keep in mind that when fastening the elements with bolts, you will need to make holes for the bolt heads so that they do not protrude from under the plywood covers. We fasten the plywood sheet to the tire.

   

   By the way, please note that the plywood sheet is attached on both sides, because. we will attach roller legs to the bottom of our ottoman, which will move our ottoman on wheels.

3. We begin to glue our twine to the tire, you need to start from the middle and lay the twine in the shape of a snail, which contributes to a rather beautiful pattern.

   

4. You need to glue on strong glue, we recommend using glue in a special gun, but if you don’t have such a tool, then glue will do - “Moment”, but note that it must be very sticky!

   

5. Further, when the cover of our ottoman is glued with twine, we begin to glue the twine directly onto the tire itself.

   

6. In order for the rope to fit better on the tire, we need to turn the tire from top to bottom, which will make it easier to attach the rope.

   

7. Next, we glue the tires completely, and cut off the excess twine and glue it on the cover.

   

8. Next, we glue the lid and cover our ottoman with varnish. Covering the ottoman with varnish is necessary so that the rope with which our ottoman is pasted over does not get wet under the influence of rain.

Tire ottoman - ready. By the way, as a decor, you can screw legs to it - wheels, then it will become the object of adoration for your children. That's all, subscribe and join our group of builders with your own hands!.