How to make a border for a garden path. Do-it-yourself forms for borders in landscape design: lawn, garden path decoration

It is necessary to additionally make borders in order for the path to look harmoniously on the site. In this article, we will talk about how to make curbs for tracks.

The need to create curbs for garden paths is closely related to the functions they perform. These include:

• decorative. curb is stylish decoration the appearance of the area.
• Protective. The design prevents grass from sprouting, prevents runoff of water during irrigation or rain on the track, and also contributes to its long service life.

Kinds

You can decorate the path for the garden with any of the available materials, depending on the author's imagination. But when choosing materials, their advantages and disadvantages should be taken into account. Borders for garden paths are:

• concrete;
• plastic;
• metal;
• brick;
• green;
• wicker;
• from stone.

This type of material for garden paths is considered the most practical of all its varieties. The main advantages of a concrete curb are durability, ease of maintenance, resistance to weather conditions.

There are two ways to make such a design with your own hands. The first method is to cast curb blocks using special shapes. It is not recommended to buy a special form due to its standard sizes, which are not always suitable for arranging tracks made at home.

For self-manufacturing Forms must use the following materials:

• drill driver or screwdriver;
• screws with non-secret caps;
• long, even, planed bars;
• a clean and even sheet of metal or thick plywood of at least 5 mm.

For the manufacture of a curb made of concrete, it is necessary to have the following materials available:

• water;
• crushed stone;
• cement brand 400 or 500;
• sand;
• decorative elements;
• reinforcement or wire with a thickness of 4-6 mm.

For the manufacture of such a design, it is necessary to sequentially perform the following steps:

• Fix the bars on the surface of the sheet or plywood, which will correspond to the size of the future block, using screws.
• If the sheet is large, then several formworks with adjacent sides can be made.
• It is advisable to make a mold for the curb with a length that varies between 1000–1200 mm. Otherwise, there is a high risk of breaking the block.
• Width and height should have an approximate ratio of 1/2-1/4.

When making a concrete curb, the following sequence of operations should be performed:

• Immerse the crushed stone in water or pour it so that it is saturated with moisture and sets well with the solution.
• Mix cement with sand in a dry form, in a ratio of 1:4 or 1:3 until a homogeneous mass is formed . It is advisable to use a construction mixer.
• Add crushed stone and water to the dry mixture.
• Mix everything again. When mixing, there should be no lumps of dry sand with cement.
• Use the level to set the shape.
• Lubricate the bottom, formwork with oil or mining, so that it is easy to remove the workpiece from the mold.
• Fill the prepared form with concrete halfway.
• After laying the reinforcement. To do this, pre-tie the connection points with wire.
• Fill the remaining space in the mold with concrete mix.
• Level the surface of the future block with a trowel.
• During the drying period of concrete, moisten it with water for 2-3 days, especially if the weather is hot.
• After drying, the form can be disassembled.
• Upon completion, the formwork is cleaned and reassembled.

Production of a monolithic border

Monolithic - This is another option for a concrete curb. This design is used for the manufacture of flower beds and flower beds. In the future, it cannot be changed, but when casting, you can make a bend, an oval or a smooth rounding. Making such a border is much easier, because there is no need to prepare a mold.

Manufacturing steps:

• Dig a trench in the construction site, the depth of which will be one third of the total height of the curb. The bottom of the dug trench must be level. .
• Prepare formwork. For the manufacture of formwork, it is enough to use wave slate, sheets of metal, plywood, corrugated board.
• With outer side walls to drive steel pins into the ground, which will hold the formwork.
• cook concrete mix and pour it into the formwork.
• To prevent the appearance of voids in concrete, you can use a building vibrator or conventional reinforcement, introducing it into the poured mass.

Having made the border, you need to close it from direct sunlight on it during the drying process. Also every day you should moisten the curb with water to prevent cracking.

The main advantages of a plastic border:

1. Ease of installation and dismantling.
2. High durability.
3. High strength.
4. Ease of use.
5. Resistance to insignificant mechanical influences.
6. Possibility of creating sinuous contours for the track.

In order to install such a structure, it is not necessary to dig trenches, prepare the foundation and use special fasteners. To fix the plastic curb, it is enough to use anchor pins that are firmly connected to each other.

Metal borders are made of copper, aluminum and stainless steel in the form of a strip. They protect garden paths from damage and prevent grass from sprouting. This design is ideally combined with gravel paths. The main advantages of metal borders are ease of installation, strength and durability. A design feature is the presence of tapes that are buried in the soil along the contour of the garden path.

When installing a metal border, the tape should be deepened 10-15 cm into the ground so that no more than 2 cm of the metal structure remains on top.

This type of construction is popular because it can withstand very coldy and humidity. Ideal, from the point of view of landscape design, is the use of facing brick. Brick construction is considered a traditional decoration garden path on country-style plots and in English style. Most often, this design of the border is used to determine the boundaries of reservoirs and the construction of flower beds.

The advantages of using such a design are:

• simplicity;
• the ability to adjust the height of the curb.

In order to independently build a brick border for a garden path, you must follow these recommendations:

1. Mark the borders of the border. You can do this with a rope, and on smooth turns you can use a garden hose.
2. Dig a trench 15 cm deep and 25 cm wide.
3. Fill the trench with mortar almost to the very top and leave for several days for the mortar to dry.
4. After that, the bricks are laid out on a small flooded foundation. You can lay them the way you want, for example, along, across, in two layers or in another way.
5. When laying out bricks with outside leave a small indent of up to 100 mm from the flower bed. It is necessary in case you mow the grass with a lawn mower. It will be possible to put mower wheels on this indent and carefully mow the lawn.
6. There must be mortar between the bricks. Also, fill the indentation of 100 mm with mortar at the same level as the ground.
7. In conclusion, from the side of the flower bed, the border is covered with earth, which is well compacted.

This design is ideal for landscape design in the style of "country". But such borders have the only drawback - fragility. The service life of wooden borders does not exceed ten years, provided that the wood is treated with special antiseptic agents.

There are many ways to install a wooden curb:

• Drive in pegs of the same length.
• Lay planks along the path.

green border

This type of border is universal for sites in any style. Due to systematic care, this type of fence is considered quite difficult, although it looks very beautiful visually. by the most suitable plants for this, cotoneaster, boxwood and undersized shrubs are considered.

When using this type of fence, it is important to draw a clear outline, according to which to plant plants at a distance of 20 to 35 cm from each other.

This design is ideally combined with a garden path made of paving slabs, from paving stones, as well as from stones. The installation of such a curb requires large financial expenses because the stone is considered expensive material. However, if you live near a river, then rounded stones can be collected for free.

When building a stone border, decorative gravel, pebbles, marble, sandstone, shell rock, granite, limestone are used.

For the manufacture of a stone curb, you need to perform the following work:

• dig a pit;
• lay mulching material (spunbond) in the trench to protect the curb from grass sprouting;
• pick up small stones similar in size and lay them tightly to each other;
• the gaps formed between them are filled with dry cement.

When making a border, it is important to select stones of the same size and lay them close to each other. When gaps are formed between the stones, it is advisable to fill them with small stones.

braided border

Such a border is considered aesthetic, since natural materials are used in its manufacture. In order to make such a border yourself, you need:

1. Prepare thin wooden logs, willow twigs, even planed sticks.
2. Clear the rods from the bark.
3. Cover them with a special solution for better preservation.
4. Along the perimeter of the flower bed, insert the sticks into the ground, in increments of 3–5 cm.
5. Wrap the sticks with willow rods.

As you can see, there are many options for a beautiful and harmonious addition to garden paths in the form of borders. If you have imagination and desire, you can decorate the site yourself and enjoy the beauty.

Video

In this video, you can learn more about the principle of making a curb for tracks:

First of all, it is a very light and flexible material that allows you to make edging of any shape, well repeating any bends and turns.

They easily merge with paving slabs, concrete and asphalt pavement are durable and beautiful in appearance. The installation of such a curb material is very simple, it is quite within the power of any person who does not even have the skills to perform construction work.

Application features

Being a beautiful edging material for walking paths, plastic curbs are very different from traditional concrete and stone products. Not required for shipping plastic curbs freight transport, and for their installation it is not necessary to perform a large amount of earthwork and concrete work.

The shape of plastic borders is very diverse. It can be a flexible colored tape of the "Country" type or three-dimensional blocks, reminiscent of a natural stone. The cost of such a fence is much lower than that of traditional stone or concrete products, and appearance is of extraordinary originality.

A wide range of colors of the material allows you to choose the shade closest to the color of paving slabs. In addition, using plastic materials, you can create multi-tiered flower beds and flower beds.

Variety of plastic enclosing materials

Today, in the building materials market, manufacturers offer big variety plastic borders for garden paths and flower beds. Any owner of a summer house can choose for himself exactly the option that will give his site an original and unique design. The following is short description several types of the most popular plastic garden borders.

Ribbon borders

Due to this shape, it is well kept in the ground and does not lend itself to cross section.

The most popular among the tape plastic materials is the country garden border. Its upper edge has a clearly visible thickening, and the lower one is bent at a right angle.

The Gidrolica Country border is for sale in the form of a rolled tape 10 meters long, 110 mm high and 20 mm thick at the top. In order to facilitate the deployment and alignment of the roll, it is necessary to hold it in the sun for some time before laying to warm it up.

Manufacturers offer hydrolic tape in terracotta, green, white and black. The material does not fade in the sun, is resistant to ultraviolet radiation and does not respond to changes in outdoor temperature.

Fence "Garden maze"

In appearance, the plastic garden border Labyrinth resembles small blocks of natural flat stone. Holes are provided on the edges of each block for fixing, and fixing stakes are included in the delivery package. Combining the holes of adjacent blocks, it is possible to securely fix the curb in the ground with the help of stakes.

This enclosing material is also not affected by temperature changes and is resistant to UV. It is installed simply on the surface of the earth and, if necessary, can be easily dismantled and moved to another place. Often used for and fencing flower beds.

Garden border "Old Stone"

This plastic material its shape resembles a natural stone block 150 or 300 mm high. The length of such a block is 300 mm. In one package, manufacturers stack 8 blocks 150x300 mm and 8 blocks 300x300 mm.

The border can be laid directly on the surface of the earth or slightly buried. Fastening to the ground is carried out using long plastic nails, and when laying parts in two or more rows, the blocks are fastened together through vertical holes. This option looks very nice when framing straight tracks, but if rounding is necessary, the protruding corners of the parts will be visible.

"Garden constructor"

The individual details of this enclosing material resemble a half log split along the fibers. One side of each border is semi-circular, and the other side is flat. Product height: 150 and 210 mm. The total length of products in one package is about three meters.

The manufacturer offers blue, dark green, terracotta, sand, brown and others. color solutions. The fence can be assembled not only from parts of the same color, but also to use several, creating an originally painted multi-colored border.

This fence is very convenient for framing flower beds. unusual shape, creating children's sandboxes and allocating playgrounds.

"Decorative brick"

The details of this plastic garden border are very similar to the rugs of ordinary clay bricks buried in the ground at an angle of 45 degrees. At the bottom of each part, a mounting anchor is provided, which is simply stuck into the ground to secure the part. Between themselves, the individual blocks are fastened through a thorn-groove connection.

Unlike natural brick, plastic parts durable and do not crumble from adverse atmospheric and temperature influences. Plastic does not fade with time and is not affected by ultraviolet radiation. garden border " decorative brick» is well kept at the installation site, and if necessary, can be dismantled and reinstalled to protect another area.

Border B300.8,5.4,5

This type of border belongs to tape products, but is distinguished by a particularly reliable method of fastening. In its lower part, triangular sectors protruding by 85 mm are provided. The tape height is 300 mm, and top part has a thickening of 45 mm. The border tape is delivered rolled up, and the length of one tape per roll is three meters.

The installation of the curb is carried out in a shallow trench, and the fixing is done using plastic anchors. It is possible to lay a layer on top of the fixed triangular segments cement mortar or performing simple backfilling with earth. The dismantling of such a fence is rather difficult, and therefore, when installing it, it is necessary to very accurately determine the location of the flower bed or path.

Advantages and disadvantages of plastic fences

The main advantages of garden borders made of plastic are:

• ease of installation and the possibility of dismantling for reuse;
• durability of the material and resistance to adverse weather conditions;
• high resistance to mechanical stress;
• safety of products in case of swelling of the soil or soil movement;
• a large selection of designs and a wide range of colors;
• beautiful appearance of the installed fence;
• the ability to create borders of any configuration.

In addition, one can note the relatively low cost of materials in comparison with traditional products made of stone or concrete. When installing plastic fences, a sand cushion and drainage are not required to remove moisture, which also saves on building materials.

The scheme of fastening the plastic curb.

Plastic garden borders are multifunctional material, with which you can protect not only garden paths, but also flower beds, children's sandboxes, garden trees, a blind area around the house, allocate separate areas for relaxing on the lawn or in the garden.

The disadvantages include the low environmental performance of plastic and the possibility of theft of the curb with a long absence of the owners in the summer cottage. In addition, a plastic curb cannot be used to protect a car parking area in the courtyard of a house. For these materials, the weight of the machine is too great and they can be destroyed under such a load.

Finally

Plastic garden borders are convenient, beautiful and durable material to solve many issues related to landscape design. They allow not only to beautifully decorate a backyard or country cottage area, but also periodically change it without spending a lot of effort and additional funds on it.

All work related to the installation or transfer of plastic fencing can be easily done on your own. Lightweight and comfortable material can be installed simply on the surface of the earth, and, if necessary, moved to another place or put away for storage.

Without beautiful garden paths, a neat site design is impossible to obtain. The material for their creation are usually clinker bricks, paving stones, decorative tiles or concrete. Sometimes more exotic and unusual elements are used: wood, grass, gravel, etc. To complete the design of the path itself, borders are used. In most cases, this element is required. About what are the borders for the tracks, and we'll talk further. We will also examine in detail the technologies by which this element of landscape design can be made.

Purpose

The garden border performs several functions at once:

• gives the design of the track a spectacular finished look;
• prevents the growth of lawn grass;
• strengthens the edges of the track;
• prevents melt water from entering the track.

Types of garden borders

This element of the track is made from the most different materials A: brick, concrete, wood, metal, plastic or even plants. It can look very beautiful as a ready-made border bought in a store, or assembled independently. In size, these elements are high and low, wide and narrow. The most important thing when choosing a material is to try to make sure that the curb fits as harmoniously as possible into the design of the track, as well as the entire site as a whole.

Brick use

It is very easy to assemble such borders for tracks with your own hands. This material is usually used if the path itself is lined with stone or filled with concrete. Most often, not an ordinary brick, but a facing brick is chosen for the device of the curb. Such material is characterized by increased strength and resistance to the effects of adverse environmental factors.

The technology for making brick borders is very simple. In most cases, this element is assembled before paving or pouring the path itself. First, the contours of its passage are marked on the ground. Further, small trenches are dug along them (approximately 2/3 of the brick height deep). At the bottom, you can pour some sand or gravel. In this case, the trench should be dug deeper.

The bricks themselves are not installed vertically, but at an angle, so that the edge of the curb turns out to be “jagged”.

Wood application

Borders for paths of this type fit very well into the design of areas in Provence, country, Russian, Ukrainian, etc. Elements of this material are usually framed by paths lined with wood or gravel, as well as simply sown with low grass. Sometimes, for the manufacture of such a border, a board is used, placed on the end in trenches dug along the edges, or a bar. However, these tracks do not look very solid. In addition, the board and even timber are short-lived materials.

Curbs made of logs look much more spectacular and original. The latter can be cut on their own from thick branches or thin tree trunks, or purchased finished material in the shop. In purchased borders, logs are tied with wire and come already processed from rotting and insects. Therefore, they are much easier to install.

As in the case of bricks, the curb of blocks is assembled before laying out the track itself. After marking, a trench is also dug. Sawn logs are treated with an antiseptic. It is very good to smear that edge of them, which will be in the ground, with drying oil or used engine oil. The material prepared in this way is simply installed vertically in the trench.

In order to make such do-it-yourself borders for tracks neat and attractive, logs can be coated with wood oil. Varnish for this purpose is better not to use. Even imported products of this type do not tolerate high humidity too well.

Concrete border

This is one of the most popular and durable types. The depth of the trench along the edges of the path under such a curb should be about 4 cm. The optimal height and width of concrete strips is 20 x 15 cm. It is not necessary to arrange a sand or gravel substrate under such a curb. It will be enough just to level the bottom of the trench. Can you put it in some waterproofing material, for example roofing material. Blocks or paving stones are installed close to the trench.

You can also pour curbs for tracks with your own hands from concrete yourself. In this case, formwork will need to be done. For its manufacture fit plywood or (if the path has bends) sheets of thick tin. After pouring, the top of the concrete curb is carefully leveled using a level.

How to prepare concrete mix

The solution is prepared as follows:

• Pour sand and dry cement into the trough and mix thoroughly.
• Add water so that the mixture is neither too thick nor too thin.

The proportion of sand/cement should be 4/1. Ready curbs several times a day - at least for a week - should be watered with water from a hose or from a bucket. Otherwise, they will crack.

Wicker elements

Such a curb for the path in the country house looks very beautiful and unusual. To make it, you need to prepare:

• thin chumps;
• many willow twigs (of the same length);
• hard wooden sticks.

Blocks of wood are dug along the path at a distance equal to the length of the willow twigs. Sticks are stuck between them. Then they braid them. It is better to soak them beforehand, then it will be more convenient to work. For weaving, rods are used in several pieces (2-3 each). Each bundle is carried out behind the first stick, then in front of the second, etc. The rods can be fastened together with a thin wire. After the first section is ready, start weaving the second.

Plastic curbs for garden paths

This ready-made version can last a very long time and is installed elementarily. They are plastic borders - a flexible wide tape, usually sold in bobbins. To facilitate cutting, it must be unwound and laid out on a plot in the sun. Further along the future path, a narrow groove is dug about 8 cm deep.

A plastic border is installed in it. For tracks, you can use a tape of any color. The main thing is that the shade harmoniously fits into the design of the site. Typically, these borders have green color. But yellow, and gray, and any others can look beautiful. The installed tape is added dropwise with earth and compacted.

"Live" border

This is the most beautiful and most difficult option to perform. For the manufacture of a "live" border, it is best to use plants such as or boxwood. In order for the path to turn out to be harmonious, the width of the green ribbon should not exceed 30 cm. In this case, a curb is arranged simply by planting plants at a short distance from each other. The grown bushes should subsequently close tightly.

Of course, unlike the usual, a "live" curb for garden paths will require much more maintenance. It will have to be cut and watered periodically (2-3 times per season). Borders look very nice and from decorative grassy undersized plants. In this case, long narrow flower beds are simply arranged along the edges of the path.

metal border

It is also quite beautiful and at the same time very durable option. Such curbs for tracks can be made of aluminum, copper, steel and are well suited for a site whose design is made in the style of minimalism. Purchasable Options such ribbons can be decorated with embossing, have curly edges, that is, look very attractive. Installing a curb of this type is an extremely simple procedure. The tape is simply dug along the edges of the track in a strictly vertical position.

How to make a curb for paths from bottles

Using this waste material, you can arrange a curb even for the longest path in just a couple of hours. Of course, it will not be especially beautiful, but it will cost a penny. In order to make a border, the bottles are simply dug into the ground with their necks down. You can diversify the design of the tape using the material different colors. It is advisable to cut off the neck of the bottles before instillation. You need to dig them in to half the height.

The advantages of such curbs for tracks include not only cheapness, but also durability. Plastic won't rot like wood or rust like metal.

As you can see, making curbs for a track is the simplest procedure in most cases. If you do everything slowly, you get a very effective element of landscape design, durable and reliable.

Each owner country house, cottages or personal plot interested in giving his site individuality and originality. To this end, richer owners invite newfangled designers, buy expensive materials, as a result, expecting to see masterpieces on their site. modern design and . What should the more modest owners of private houses do? They also really, really want to express their site with the help of newfangled "tricks"! There is a way out for them - and what a way!

Taking the risk of personally arranging their personal plot, they kill several birds with one stone: they get an exclusively designed plot, save on labor and designer services, and also improve and acquire new skills and abilities!

Let's say you are the proud owner country cottage, acquired, one might say, for the last pennies. You also really want to bring your site to perfect order, break flower beds, flower beds, a small garden, and also - a site for relaxation! Maybe you have already read several articles on our website on topics such as, or on other useful topics. It is even possible that you have already laid out your first garden paths and felt from this creative work such a buzz that they decided to turn to us again for help and learn how to make all kinds of borders for their paths and flower beds. Then let's not delay such an inquisitive and purposeful guest and go straight to our topic: how to make DIY borders for garden paths!

Human imagination and ingenuity have come up with a great variety of all kinds of borders - both purchased, manufactured at the factory, and home-made, available to everyone. We list some of the most common:

braided border– very beautiful, aesthetic and natural materials. Plus, it’s also that you don’t need to buy anything - sharpened wooden pegs treated with antiseptics are driven into the ground (5-7 cm from one another), and thin willow twigs are wrapped around the pegs;

Plastic- the plastic border is easy to install, strong and durable, installed with anchor pins. Does not require any preparatory ground work before installation. Popular because of its affordable price;

Brick- is very popular, withstands any frost and humidity. Such a border lined with facing bricks looks most beautiful;

flower bed with a brick border, photo

stone border- the pleasure is somewhat expensive, but it looks fundamental, beautiful, very strong. When laying it, it is important to select stones of the same size;

– great idea for the use of old unnecessary tires! As a curb, you can use one tire, and also, by combining several tires at once - a large curb. It all depends on your imagination - put it on the ground and cover it with soil - once;

put and dig into the ground a whole chain of tires, you get a large and original barrier, on which it will be possible to sit down if necessary - two. And what can we say about all kinds of figurines-beds made of tires - a swan, an elephant, a zebra, heroes from Smeshariki, funny snails ....

- the simplest and most popular curb, consists of concrete blocks measuring 1000 × 200 × 80. It can be laid both on the edge and on its wide side. It is used in the fencing of paths and flower beds of rectangular and square shapes. Very durable and strong;

Borders for flower beds made of wood(many options) - very beautiful, natural. As a material, both planks and whole logs are suitable. Due to the fact that you can give any shape to the material - there is a great variety of models and shapes. Be sure to prepare the soil before installation and treat the material with antiseptic materials. Not durable - the service life is not more than 10 years;

Border made of plastic or glass bottles - this is perhaps the cheapest and most common option for fencing! Such a fence can take any shape, it looks original, and if you paint the bottles in different colors- generally creates a spring joyful mood. Bottle railing is made by digging in glass or plastic bottles one by one along a given contour. When used as building material plastic bottles - cut off the necks with a sharp knife;

green plant border- the most beautiful, but also demanding permanent care behind the plants that make up the border. Ideal plants for a living border are boxwood, cotoneaster, and some undersized shrubs. When forming such a fence, it is necessary to designate a clear contour and plant plants along it at a distance of 20 - 35 cm from one another;

metal border consists of copper or aluminum segments that are simply dug in along the contour of a flower bed or path. Easy to install, strong, durable;

mosaic border made from pebbles, pieces of tiles or broken porcelain (old cups, plates). Initially, such a border will require the installation of a frame made of wooden planks, and then it will be possible to proceed with the artistic laying of a mosaic of pebbles or various pieces.

The garden border is used to give the garden a more presentable and tidy look. Indeed, for many, a dacha is not an easy place to work or relax, as well as an object of self-expression.

garden border

Garden border: description and types

The garden border serves not only as a visual decoration of the garden, it helps to save garden paths and increase their service life, slows down the spread of weeds. Depending on the material used, borders are divided into several types: stone, brick, metal, plastic. A high-quality curb prevents the path from spreading to the sides, protects it from grass, and prevents water and soil from accidentally falling onto the path.

Border for garden paths

Border for garden paths can have a different configuration and shape, choosing given element registration of the cottage should be guided by the result that you want to get, in cash, which have a willingness to invest and a function of the element itself.

Border for garden paths

plastic border

Refers to the cheapest material. With it, you can decorate the track with a minimum of effort. Despite the simplicity and low cost, this frame copes with its duties - it does not allow the track to spread. In addition, it is almost invisible, which gives room for various options track framing design. In addition, the plastic border will fit into absolutely any style of summer cottage.

To the virtues this material can also be attributed long term service, ease of installation, durability. In addition, the plastic is impact resistant. environment and easily tolerates small mechanical loads. The properties of plastic allow you to build any bend of the track.

It should be noted separately that for the installation of a border of this material is not required preparatory work. There is no need to dig trenches and create various drainages. This device has special fasteners that make it easy to fix the structure in right place.

Among the shortcomings - low environmental friendliness of the product, low appearance characteristics. If there is a need to create a border that emphasizes the style of the dacha, you need to use a different material.

plastic border

decorative border

Decorative the border perfectly complements and completes the image of the garden. You can show your imagination and build borders yourself, you can use finished products.

For self-production, any improvised material is suitable: bottles, stones, wood, plates, even car tires. In addition, the use of unusual materials will positively highlight the appearance of the garden and give it originality. The main rule is that the border must be combined with the rest. decorative elements dachas.

decorative border

concrete curb

Concrete the border attracts with its solidity and durability. However, its construction will require time and money. You can make the elements of the border yourself or purchase them at a hardware store.

A feature of this material is the need to create recesses for stronger fixation of stones. This can be done using a specially dug ditch or simply deepening each stone. In order for the curb to not sink into the ground over time, you need to make a foundation. With such a border, you can make a pavement from paving stones or flat stones. It will look very interesting and fresh.

concrete curb

country style border

If the cottage is framed country style, you can make a border that matches it. A plastic element sold in stores will help with this. They perfectly cope with all the functions of the garden border and fit stylistically into the stop. The advantages include the low cost of such elements, a pleasant and unobtrusive design, ease of use.

country border

How to make a border with your own hands

Any do-it-yourself dacha elements will not only please the eye, but also serve as a source of pride. In addition, a self-made thing is much more original than a store-bought one. A border for a summer residence can be made from almost any material. It is enough just to decide which appearance will be more interesting and which material is more accessible.

If you decide to make concrete fences, you can cast the molds yourself and then simply mount them in the right area. Such a fence, if desired, is easy to transfer by changing the shape of the path or garden bed.

How to install a garden border

In order to install a plastic border, it does not take much effort. It is necessary to dig a ditch, the depth should be no more than ten centimeters. It is installed curb tape. In order to facilitate installation, you can stand the tape in the sun, then it will become more flexible. The set of curb tape includes special anchors. They allow you to fix the tape in the right place. Where the tape bends, you need to use additional fasteners. In order to connect the sections of the tape together, you need to use special locking connections.

To install concrete curbs for the tracks, you will need a trench a couple of tens of centimeters deep. At its bottom you need to pour crushed stone and ram it. A layer of sand is laid on top of the rubble. After that, a concrete solution is poured into the trench, into which the fence is installed. This is done to more clearly fix the curb stone. Such a trench bottom will not allow the curb to sink into the ground and provide reliable protection against water erosion.

For the installation of concrete fences, you can use another method. It resembles a strip foundation. To mount this type of fence, formwork is required. The trench must match the future width of the curbstone. Then you need to fill the formwork with mortar and remove it when it hardens. In order for the border not to crack, you need to cut it with a spatula into pieces about one and a half meters long.

Where can I buy a garden border

You can buy this element of decor in the online store or order it at specialized points of sale. Also, you can build a garden border yourself.

Warm beds - how to do it yourself, step by step instructions