Roofing covering technoelast. Multifunctional material Technoelast - waterproofing for all occasions

TECHNOELAST is a rolled roofing material of the "PREMIUM" class

TECHNOELAST refers to polymer-bitumen materials. In the production of this material, modifier polymers are used, which make the material more elastic and resistant to both low and high temperatures. In the production of technoelast, an SBS modifier (styrene-butadiene-styrene) is used, which is sometimes referred to as "artificial rubber". This polymeric additive makes the material frost-resistant (it can be laid at temperatures down to -250C) and heat-resistant (the material does not “drip” from the roof, i.e. retains its shape even on a small slope during prolonged heat).

TECHNOELAST is used both for waterproofing and for the installation of the lower and upper layers of the roofing carpet of buildings and structures. Thanks to its excellent physical and mechanical characteristics, it meets all the requirements for increased reliability and can be used in all climatic regions. TECHNOELAST is used where only the highest reliability is needed. As a rule, these are business centers, underground parking lots, hotels and other premium-class facilities.

For the production of the upper layer of technoelast, a coarse-grained dressing (shale) is used, which protects the material from ultraviolet rays.

Technoelast is laid by fusing with a gas burner. The surface must first be primed with a primer for better adhesion to the surface. The top layer of material (with dressing), as a rule, is laid on the pre-laid bottom layer of the roofing carpet (when installing a two-layer roof).

TECHNOELAST is produced on two types of substrates: polyester canvas (EKP-5.0/EPP-4.0) and fiberglass (TKP-5.0).

Specifications

Basic physical and mechanical characteristics	EKP-5.0	TKP-5.0	Technoelast EPP-4.5
Name of the indicator:
Thickness, mm (±0.1mm)	4,2	4,2	4,0
Weight 1m2, kg (±0.25 kg)	5,2	5,2	4,95
Tensile breaking strength, N, not less than	600/400	800/900	600/400
Flexibility temperature on the beam with R=25±0.2 mm, ºС, not higher	-25	-25	-25
Heat resistance, ºС, not less	100	100	100
Protective coating type
top protective layer	coarse dressing	coarse dressing	film with logo
bottom protective layer	film	film	film
Service life, years	25	25	25
Fire-technical indicators:
flame spread over the surface	RP1	RP1	RP1
flammability	IN 2	IN 2	IN 2
combustibility group	G4	G4	G4

Technoelast is biostable.

Application area:

Designed for waterproofing buildings, structures and building structures.

Structure:

Technoelast is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) to a glass or polyester base. Coarse-grained and fine-grained dressings, polymer films are used as a protective layer.

Specifications:

Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.

Brands:

Depending on the type of dressing and application area, Technoelast is produced in two grades:

Technoelast K- with coarse-grained dressing on the front side and a polymer film or fine-grained dressing on the deposited side of the web; used for the device of the top layer of waterproofing with protection from sunlight;

Technoelast P- with fine-grained dressing or polymer film, or a combination of them on both sides of the canvas; used for the device of the lower layers in the multilayer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.

EPP

HPP

EKP

TCH

Material specification table:

Parameter name		EPP	HPP	EKP	TCH
Thickness (±0.1), mm		4,0	3,0	4,2	4,2
Weight 1 m2, kg, (±0.25 kg)		4,95	3,88	5,25	5,32
Breaking strength in the longitudinal/transverse direction, N, not less than	polyester	600/400	-	600/400	-
	fiberglass	-	-	-	800/900
	fiberglass	-	300/–	-	-
Flexibility temperature on the beam R=25 mm and R=10 mm, °С, not higher		-25	-25
Heat resistance, °С, not less than		100	100	100	100
Protective coating type	upper side	film without logo	film without logo	slate	slate
	welding side	film with logo	film with logo	film with logo	film with logo
Length / width, m		10x1	10x1	10x1	10x1
Mass of binder from the surfaced side, kg/sq.m., not less than		2	2,0	2	2
Water absorption within 24 hours, % by mass, no more		1	1	1	1
Waterproof at a pressure of at least 0.2 MPa, for 2 hours		absolute	absolute
Loss of dressing, g/sample, no more				1	1
Waterproof for 72 hours at a pressure of at least 0.001 MPa				absolute	absolute
Flexibility temperature** on the beam R=25 mm, °C, not higher				-25
Flexibility temperature on the beam R=25mm, °С, not higher					-25

Manufacturing jobs:

According to the "Guidelines for the design and installation of roofs from bituminous materials roofing company "TechnoNIKOL", can be used in all climatic regions according to SNiP 23-01.

TechnoNIKOL Corporation offers modern Construction Materials that meet Russian and European quality standards, which include roofing roll materials, waterproofing mastics, bitumen, materials for polymer roofing.

Multifunctional SBS (polymer)-modified, built-up roofing and waterproofing material of increased reliability.
Flexibility on the beam R = 25 mm, not higher than - 25 0 C, heat resistance + 100 0 C

is intended for installation of the roofing carpet of buildings and structures, waterproofing of foundations and other structures with increased reliability requirements in all climatic regions. The element of Technoelast - the cold of the polar night and the constant pressure of man-made ground water. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always where serious construction projects are implemented. It is where only the highest reliability is needed.

Overview of Technoelast

Technoelast is intended for installation of the roofing carpet of buildings and structures, waterproofing of foundations and other structures with increased reliability requirements in all climatic regions. The element of Technoelast is the cold of the polar night and the constant pressure of technogenic groundwater. It is used where other materials are unlikely to provide the required level of protection against water. Technoelast is always where serious construction projects are implemented. It is where only the highest reliability is needed. Technoelast is produced by applying a bitumen-polymer binder containing bitumen, SBS thermoplastic and fillers to a glass fiber or polyester base. Coarse-grained K, fine-grained dressing M and polymer film P are used as a protective layer. Technoelast is welded with a propane torch.

Features of Technoelast

Technoelast is biostable.

Application area

It is intended for the installation of roofing carpet of buildings and structures and waterproofing of building structures.

Structure of Technoelast

Technoelast is obtained by double-sided application of a bitumen-polymer binder, consisting of bitumen, butadiene-styrene thermoplastic elastomer and filler, to a glass or polyester base. Coarse-grained and fine-grained dressings, polymer films are used as a protective layer.

Technoelst stamps

Depending on the type of protective layers and application area, Technoelast is produced in the following grades:

TO

With coarse-grained dressing on the front side and a polymer film or fine-grained dressing on the deposited side of the web; it is applied to the device of the top layer of a roofing carpet;

P

With fine-grained dressing or polymer film, or a combination of them on both sides of the canvas; applied to bottom layer device roofing and waterproofing of building structures (foundations, tunnels, etc.).

Table Characteristics of Technoelast

800/900

Parameter name		TO	P
Coating type:	top	film	film
bottom	slate	film
Weight, kg/sq.m. at least		5.0	4.6
Tensile strength in longitudinal / transverse direction, N, not less than	on polyester	600/400	600/400
	on fiberglass	800/900
	on fiberglass	294	294
Thickness, mm		4.2	4
Water absorption within 24 hours, % by mass, no more		1	1
Mass of binder from the surfaced side, kg/sq.m., not less than		2	2
Loss of dressing, g/sample, no more		1
Flexibility temperature on the beam R=25mm, °С, not higher		-25	-25
Flexibility temperature on the beam R=10 mm, °С, not higher		-25	-25
Binder brittleness temperature, °C, not higher		-35	-35
Waterproof for 72 hours at a pressure of at least 0.001 MPa		absolute
Waterproof at a pressure of at least 0.2 MPa, for 2 hours			absolute
Length\width, m		10x1	10x1
Heat resistance, °С, not less than		100	100

Manufacturing jobs

according to the "Guidelines for the design and installation of roofs made of bituminous materials of the TechnoNIKOL Corporation", can be used in all climatic regions according to SNiP 23-01.

IN modern construction new types of materials with improved technical characteristics are increasingly being used. One of these innovations is technoelast, which is produced by the Russian corporation TechnoNIKOL.

What it is?

Technoelast is a multifunctional bioresistant roofing and waterproofing material high quality and increased reliability. It is produced using a unique technology by applying a special insulating compound (bitumen, SBS thermoplastic or its modifications and filler) on a fiberglass or polyester base on both sides.

SBS (styrene-butadiene-styrene) is a polymer, styrene-butadiene thermoplastic elastomer, better known to everyone as artificial rubber (it is this that provides high elasticity to the web, preventing cracking at low temperatures).

As a filler, talc, dolomite and other materials are used. The surface protective layer consists of coarse or fine-grained mineral dressing (sand, etc.) and a polymer film.

Application

Waterproofing Technoelast is designed for waterproofing any building elements of structures (floors, walls, channels, mounting joints), surfaces that are constantly in contact with water (pools, foundations, basements), all types of roofs (non-exploited, "green" - with gardening, with increased load in use, etc.).

It provides 100% protection against moisture, condensation, gases and steam in any climatic conditions, taking into account the requirements of SNiP 23-01-99.

Types and brands, specifications

The insulator has several versions, depending on the conditions and application. Abbreviation:

• the first letter (the basis of the canvas) - ether (polyester), canvas, fabric;
• second, third letters (protective layer):
  • P (for the lower layers of the roof sheet, fine-grained dressing, polymer film or a combination of them is used);
  • K (for upper layers"carpet" of the roof, contains a coarse-grained dressing on the front side and a film, or a fine-grained mineral fraction on the side of the overlay).

Technoelast EPP (polyester+film+film)

Used for waterproofing the foundations of buildings and other elements of building structures, as roofing material in various types buildings. Provides reliable protection from water, absolutely waterproof, has good heat resistance, high elasticity provides greater convenience in work.

It consists of a fiberglass or polyester base, bitumen mixed with polymer additives (SBS thermoplastic), filler. The cloth has the protective layer consisting of fine-grained dressing and a polymeric film. The insulator is fastened by welding using a gas burner.

Technoelast EKP (polyester + crumb + film)

It is used as the top layer of roofing, for waterproofing basements. Differs in cold resistance, does not crack even when severe frosts. The total thickness of the material is 4.2 mm. The base is a durable non-rotting polyester, on which a layer of bitumen with a thermoplastic is applied, at the bottom is a mineral dressing, consisting of large fractions and reducing the negative effect external environment. On top - a protective synthetic film.

Technoelast HPP (canvas+film+film)

It can be used for waterproofing various sections of buildings and as the bottom (lining) layer of the roofing sheet. Frost-resistant and heat-resistant material. It is a pressed fiberglass coated on all sides with a layer of bitumen with SBS polymer additives, with a protective film that serves as an indicator during welding, prevents the web from sticking.

It does not contain polyester and mineral chips, therefore it has a small thickness (3 mm), suitable for surfaces with low loads.

Technoelast EMP (ether+fine dressing+film)

Durable bio-resistant material, designed for waterproofing building elements (including roofs) and reinforced concrete deck (roadway) of bridges. It consists of a polyester base, bitumen mixed with a polymer modifier, mineral filler (dolomite, talc, etc.) and an outer coating made of fine sand and a polymer film. It has a low level of water absorption.

Technoelast TKP (fabric + crumb + film)

It is used for waterproofing underground sections of buildings (basements, foundations), when arranging the upper layers of coatings (flat and pitched roofs), can completely replace the roofing "carpet".

A strong, durable coating that is resistant to mechanical damage, provides protection from water, and is often used as a vapor barrier. Provides a perfectly even smooth canvas.

The basis is fiberglass, which is covered with a layer of bitumen with SBS modifier. External protection consists of mineral dressing and film. The thickness of the material is 4.2 mm.

Technoelast Alpha

Designed for hydro- and gas protection of underground elements of building structures. Feature of this insulating material is the presence in its composition of metal foil, which protects underground premises from dangerous inert gases - radioactive radon, methane.

Technoelast Alpha consists of several layers. The inner part is made of polyester and an aluminum gas barrier, followed by double-sided application of a bitumen-polymer composition, filler and protective film from polymers. The 4 mm thick multi-layer construction has a high level of protection and can be used as a vapor barrier. Dimensions: 10x1 m.

Technoelast Barrier (BO)

Waterproofing material with self-adhesive surface. It is intended for protection of internal and external elements of buildings. Consists of 1.5 mm polymer film coated with bitumen and thermoplastic. The upper part is a silicone coating that can be easily removed.

BO means "without base". The absence of a base allows you to achieve high elasticity and flexibility of the material. The special adhesive composition applied to the bottom of the sheet provides reliable adhesion to concrete or metal surface, so no additional base is required.

Can be laid on combustible elements ( high level fire resistance). At a temperature vertical surfaces above +85°C it is not recommended to use it (may come off). When working, it must be borne in mind that the temperature of the surfaces during gluing should be + 5 ° C, otherwise heating of both the base and the web itself will be required. Dimensions: 20x1 m.

The material is supplied in two versions: Technoelast Barrier (BO) and Technoelast BARRIER (BO) - MINI). "MINI" is distinguished by a smaller width of the canvas. Thanks to small size provides greater convenience in operation and wide application. It becomes possible to use a waterproofing agent when working in a limited space, to protect small building and technical structural elements (sealing pipes, seams, joints, etc.). Dimensions: 20x0.2-0.25 m.

Technoelast Barrier Light

Self-adhesive insulating material intended for use in indoor areas- another modification of Technoelast BARRIER (BO). It has all the advantages of this series of protective materials: high elasticity, increased flexibility and a wide range of applications.

It has an additional top coating of non-woven fabric (polypropylene spunbond), which can be subsequently applied to any decorative elements without the device of an additional layer (fastening over the waterproofing). Dimensions: 20x1 m.

Technoelast GREEN

A special type of waterproofing material designed for high performance chemical and mechanical protection building structures, including the installation of a "green roof".

The roofs of modern urban buildings today perform not only a protective function, they often represent complex structures with a large set of design elements, arrangement of recreation areas, planting green spaces. "Green roofs" require a special approach when installing waterproofing. Provision should be made for protection against micro-organisms, chemical substances used in the care of plants, the destructive action of the root system.

"Green" consists of a polyester base, on which bitumen with polymeric thermoplastic elastomer, filler, anti-root additives are applied from 2 sides. From above, the canvas is covered with a protective layer consisting of coarse or fine-grained sand and a film. Fire resistant material.

Available in two versions: Technoelast GREEN EPP ( top part- film) and Technoelast GREEN EKP (thicker protective layer - 4.2 mm, top - slate). Dimensions: 10x1 m.

Technoelast ACOUSTIC

It is used as a hydro and sound insulating element in building structures, including when installing floating floors. Significantly reduces impact noise exposure (by 21-26 dB).

The base consists of soundproof fiberglass, on which a bitumen-polymer layer is applied. The canvas is laid end-to-end (soundproofing layer - from the side of the base), taking into account the height finish coat, fastened with adhesive tape.

Technoelast ACOUSTIC is produced by applying bitumen with polymer inclusions to the surface of the fiberglass and, additionally, soundproof geotextile. The top layer is film. Dimensions: length / width - 15x1 m, thickness - 2.5 or 4.8 mm.

The material is produced in two versions: Technoelast ACOUSTIC (thickness - 2.5 mm), Technoelast ACOUSTIC-SUPER (differs in a larger web thickness, since the bitumen-polymer composition is applied on both sides).

Technoelast SOLO

material with wide colors, with a coarse-grained top layer and a non-woven fabric underneath. It is used as a waterproofing and in the design of a single-layer roofing. Easy to use, indispensable in cases where simple mechanical fixation is required, laying on a layer of mastic.

It can be applied to the substrate by partial fusing. Has improved fire performance, refers to moderately flammable materials, almost does not spread the flame.

It consists of a polyester base, on which a binder composition of bitumen and polymeric SBS is fixed on both sides, on top - mineral filler(talc, dolomite, etc.) with the addition of flame retardants. The upper protective layer consists of a coarse-grained dressing (gray slate, aluminized slate, basalt), the lower one is made of a non-woven fabric or film.

The wide edge-overlap on the sides (1-1.2 cm) is covered with fusible material or non-woven fabric for convenience. Can be glued to a base coated with mastic, mechanically or by fusing, using automatic equipment. Edges must be carefully sealed to ensure tightness. The material is very durable, the waterproofing layer is 5 mm. Canvas dimensions: 8x1 m.

Technoelast FIX

It is applied at the device of the bottom layer of a roofing covering. A mechanical fastening system is used, followed by seam processing gas burner. This method can significantly reduce the time of work, provides a free fit of the material to the base.

Work is carried out on the principle of "breathing roof". Laying on combustible bases and any types of insulation is possible, on a roof with a large slope (up to 100%).

The material is two-layer: the top layer is Technoelast EKP, the bottom layer is Technoelast FIX, which was developed specifically for roofing with mechanical fastening. Reinforced non-rotting base made of polyester and coated on both sides with a layer of bitumen mixed with SBS polymers allows avoiding deformation.

Coarse sand in the outer (lower) part of the canvas does not allow the material to stick to the base. Polymer film at the top provides additional protection. Dimensions: 10x1 m.

is a multifunctional SBS-modified, built-up roofing and waterproofing material with increased reliability.

There are 3 varieties of Technoelast, depending on the reinforcing bases used:

• (polyester, top layer);
• (polyester, bottom layer);
• (fiberglass, bottom layer);

The purpose of technoelast is to install the roofing carpet of buildings / structures, waterproofing foundations and other structures that place high demands on reliability in all climatic regions.

Technoelast is able to withstand both the cold of the polar night and the constant pressure of technogenic groundwater. It is used in places where other materials are not able to provide the necessary level of protection against water. Technoelast is always used in the implementation of serious construction projects. It is where you need the highest reliability and quality assurance.

The manufacturing technology of technoelast is based on the application of a bitumen-polymer binder, which contains bitumen, SBS thermoplastic and fillers, on a fiberglass or polyester base. protective layer use coarse-grained dressing - K, fine-grained - M and polymer film - P.
Laying of technoelast is carried out by fusing with a propane gas-flame burner.

Technoelast is the result of double-sided application of a bitumen-polymer binder to a glass or polyester base, which includes bitumen, styrene-butadiene thermoplastic elastomer and filler. As a protective layer - coarse-grained and fine-grained dressing or polymer melted films.

There are 2 brands of this roofing and waterproofing material, depending on the type of dressing and application:

• has a coarse-grained topping on the front side of the canvas and a polymer film / fine-grained topping - with a built-up coating. Scope - the device of the top layer of a roofing carpet.
• has a fine-grained sand dressing or a polymer melted film or combinations thereof on both sides of the web. Scope - the device of the lower layer of roofing and waterproofing of building structures, which include foundations, tunnels, etc.

is an SBS-modified, built-up roofing and waterproofing material designed for the construction of the roofing carpet of buildings (structures), waterproofing of foundations, as well as other structures that require increased reliability criteria in all climatic regions.

The elements of Technoelast EKP and EPP are both the cold of the polar night and the constant technogenic groundwater pressure. They are often used to provide the required level of protection against water and are always present where serious construction projects are being implemented that require increased reliability.

Technoelast EKP and EPP are manufactured by applying a bitumen-polymer binder, which contains bitumen, SBS (styrene-butadiene-styrene) and fillers, onto a fiberglass / polyester base. Coarse-grained (K), fine-grained dressing (M) and polymer film (P) act as a protective layer.

These types of Technoelast are fused using a gas-flame method on a prepared base using a propane torch.

Are intended both for the device of a roofing carpet of buildings \structures, and a waterproofing of building constructions.

Technoelast EPP and ECP are obtained by double-sided application of a bitumen-polymer binder, which consists of bitumen, butadiene-styrene thermoplastic elastomer and filler, on a glass/polyester base.

Technoelast of these types is a material, the front side of which has a coarse-grained dressing (EKP) and a polymer film (EPP) or a fine-grained one - from the deposited side of the fabric. They are used for the device of the top layer of the roofing carpet.

pivot table specifications types of ECP and EPP:

Parameter name	EKP	EPP
Weight 1 sq.m. technoelast, in kg	5 , 0
Thickness, in mm
Heat resistance, in gr. Celsius, not less
Tensile strength in longitudinal or transverse direction, in N, not less - on polyester	600/400	600/400
Weight of technoelast binder from the deposited side, kg/sq.m., not less than
The temperature of the brittleness of the binder, in gr. Celsius, not higher
Sprinkling loss, g/sample, no more
Coating type, top	slate	film
Coating type, bottom	film	film
Water absorption within 24 hours, in % by weight, no more
Flexibility temperature on the beam R=25mm, in gr. Celsius, not higher
Flexibility temperature on the beam R=10 mm, in gr. Celsius, not higher
Length x width, m	10x1	10x1
Waterproof for 72 hours at a pressure of at least 0.001 MPa	absolute
Waterproof at a pressure of at least 0.2 MPa, for 2 hours		absolute

Specify the price of Technoelast EKP and EPP with the managers of our sales department.

it is used in the construction of the lower layer of the roofing carpet as a lining material and waterproofing of various kinds of building structures in order to protect against the penetration of moisture there. Such structures include horizontal foundations, office floors, bathrooms, swimming pools, and waterproofing of boiler pipes, etc.

Table of technical characteristics of the HSP type:

Parameter name	HPP
Weight 1 sq.m. technoelast, in kg	3 , 7
Thickness, in mm
Heat resistance, in gr. Celsius, not less
Tensile strength in longitudinal or transverse direction, N, not less - on polyester	360 /150
Weight of technoelast binder from the deposited side, kg/sq.m., not less than
The temperature of the brittleness of the binder, gr. Celsius, not higher
Loss of dressing, gr./sample, no more
Coating type, top	Film
Coating type, bottom	film
Water absorption within 24 hours, % by mass, no more
Temperature of flexibility on a bar R=25 mm, gr. Celsius, not higher
Flexibility temperature on the beam R=10 mm, gr. Celsius, not higher
Length x width, m	10x1

Ways of laying Technoelast HPP

By analogy with other built-up roofing and waterproofing materials Technoelast HPP is welded with a propane torch. After pre-training bases for gluing (cleaning the old roofing carpet, sealing all cracks and large chips with bituminous mastic or cement mortar) let it dry from moisture. The next stage is the surface treatment with a bituminous primer, followed by its drying. Then the material is tried on by rolling the roll on the surface and cuts at the junctions, at the corners, at the places of funnels and hatches. final stage the pre-rolled coil is surfacing.

Specify the price of Technoelast HPP from the sales managers.