Fabric wall panels - creative do-it-yourself decor. Do-it-yourself decorative panel on the wall in the interior Do-it-yourself interior panels

Fabric panels for many unremarkable decor. But often simple craft in the hands of a talented master can turn into a work of art. It is impossible to give certain patterns here, since everything is built on one's own imagination and imagination. The main factor is the development of technology, various master classes will help with this. In the future, everything depends only on the flight of fancy.

Choosing a theme for creating a panel

Before you start work, you should understand that the panel must be designed in a certain style. It should be in line with the decor of the room in which it will be located. Otherwise, the product can stand out from the general theme and amaze everyone present with its bad taste.

Many ideas and stylistic decisions can be gleaned from various articles that are accompanied large quantity a photo. It remains to choose the idea that you liked the most and fits the existing interior.

Classic, country, provence

The ideal panel theme for rooms decorated in the style of classics, country, Provence are various still lifes or floral motifs. The compositions in the form of landscapes also look good. Try to get away from pretentiousness, it is better to give appearance products of maximum simplicity and cheerfulness. The composition should bring an atmosphere of relaxation into the interior and evoke only positive emotions.

Appropriate in the interior of the corresponding style and abstraction. It can be noted that she is universal option, as it fits in principle with any style.

Modern

Art Nouveau is distinguished by the presence of strict geometric lines. That is why the Art Nouveau panels should contain compositions with different clear patterns. The design of the product should also be moderate. Frames for framing panels are used quite simple, almost invisible.

Scandinavian style

One of the rare topics in the Slavic expanses - Scandinavian style. It implies brightness and practicality, is distinguished by the presence of appropriate ornaments and motifs. Even a novice master can create such a fabric panel on the wall using various materials at hand, such as beads, shells, ribbons.

Also on the fabric panel there can be images of deer, Christmas trees, letters, lines, cells and other things.

loft style

In design modern interior enjoy considerable popularity design solutions loft style. There are also certain requirements here. The theme is quite diverse, but the panel should be done in only two or three tones.

Despite the strict and concise lines, the loft-style panel attracts the eye and looks perfect in the interior.

Fabric on fabric (work basics)

Paintings on fabric began to come into fashion relatively recently. But, recently, the panel is increasingly beginning to occupy a leading niche in the interior of the room. There are many admirers of this art. Some needlewomen try to make compositions with their own hands.

Often you can find variants of paintings that are obtained by painting on a fabric enclosed in a frame. But such compositions cannot be called panels. It is a completely different matter when a pattern is created on a fabric using another fabric. This is the real panel. The composition looks gorgeous if a volumetric effect is given with the help of fabric.

Main Rules

Full compliance of the panel with the style of the room design is the main requirement. But there are no rules without exceptions. If the product is made in a different theme, but color accents are observed and do not violate the overall impression in any way, then you should not deny yourself the pleasure of placing the composition on the wall.

When working on the creation of a decorative panel, it should be:

knowing of limits;
compliance with the design of the room;
full interaction of components with each other.

Techniques for creating fabric panels

Composition can be done using different techniques:

applications;
kanzashi;
patchwork;
ZD simulation.

Base manufacturing options

When starting work for the first time, it should be understood that the first time you are unlikely to get a work of art. To do this, you need at least a little bit to fill your hand. Constant training, perseverance and adherence to advice experienced craftsmen give their results.

For the first time, it is better to make panels from materials that are not a pity to spoil. And the second and further, having acquired skills, you can swipe at expensive blanks.

There are several options for preparing the basis for creation:

A base is prepared from very dense cardboard, fiberboard or plywood. A fabric is stretched over the front of the workpiece, the edges of which are wrapped on the wrong side. To prevent the canvas from moving, its edges are fixed with glue. In this way, a base is obtained, on which the application elements begin to be attached.

take wooden slats and form a frame from them, then it is covered with fabric. To do this, cut out a rectangular canvas according to the dimensions of the frame, adding 2-3 cm so that it can be wrapped on the wrong side. After the fabric is stretched, the edges are fixed to the frame with a stapler or small nails.

Styrofoam is also perfect as a base. On such a blank, a drawing or diagram is drawn with a pencil, then scraps of fabric of different colors and textures are selected. Along the marked lines, deepen the edges of the shreds into the foam using a sharp tool.

After the base is ready, they begin to select the elements from which the drawing will be created. To do this, you can use both multi-colored textiles and any other accessories that are appropriate in the composition and combined with the main elements. Complement the appliqué with all sorts of beads, buttons, rhinestones and more.

Fabric panel in the New Year theme

Even adults expect new year holidays miracle. And for kids New Year- the most long-awaited holiday. Therefore, they try to decorate the room in an original and truly festive way in order to create New Year's comfort. One of the successful elements of decor is a panel in new year style, with the help of which it is easy to achieve the goal.

To perform the composition with your own hands, you need to prepare:

a frame for framing a panel;
fabric in blue tint for background;
felt scraps, fabric cuts different colors;
thick cardboard as a base.

To begin with, the cardboard is covered with a blue cloth, firmly securing the edges of the textile on the reverse side. Then the elements of Santa Claus are cut out of cardboard to form his three-dimensional figure. An outfit is prepared: clothes and a hat are cut out of red material, mustaches, a beard, a hat lapel are prepared from white fabric or a piece of fur. For the sleigh, silver or gold-colored fabric is used.

Having prepared all the blanks, they begin the general assembly of the composition on cardboard. Parts can be glued using silicone glue, which is heated and applied with a special gun. You can see options for the execution of panels on the New Year theme in the photo below.

Composition with fabric flowers

Before you start making a more complex picture on a panel, you need to be well acquainted with the technology of its creation. First you need to prepare all the necessary materials and select or draw the appropriate diagram. It won't take you more than an hour, but then it will significantly help in the work.

Let's present a step-by-step instruction on how to make a flower panel from fabric with your own hands:

1. First, select pieces of fabric with which you can create flowers. They cut out circles of different diameters.

2. If you want to give the flower petals a beautiful wavy shape, then you must first burn the edges of the circles above the candle.

3. Collect each flower in this way: fold the circles in descending order of diameter.

4. So that future flowers do not fall apart, they are stitched with a thread in the center.

5. As a finishing touch, a bead is sewn in the middle.

6. After all the elements are ready, it remains to properly attach them to the base. For fastening very small items use silicone adhesive. Larger parts should be sewn on.

Flowers do not have to be round. Turn on fantasy, creativity and experiment. Panels from different fabric, photos of which are presented below.

On the video: do-it-yourself panel with roses from ribbons.

Creative patchwork panel

Any hostess in the house will find multi-colored scraps of fabric that do not have to be thrown away. You can create a chic panel of multi-colored textiles, especially when it comes to admirers of abstraction. With a little conjuration over the flaps, you can get original composition, which will later become the pride of the hostess of the house.

For the process of making a patchwork panel you will need:

several patches of fabric in contrasting shades;
thick cardboard for the base;
wooden frame (you can make it yourself from slats);
thread and sewing machine;
fabric glue.

All work will not take you much time and consists of the following steps:

1. Initially, a schematic picture is formed, then blanks are selected. To avoid confusion, it is better to number them according to the scheme. The resulting composition can be transferred immediately to cardboard.

2. Blanks are cut out of shreds and begin to arrange them according to the scheme. To do this, each piece of fabric must be folded in half so that the cut off part is not visible on the other side of the future picture, and fits on top of the previous ones.

3. To achieve the necessary brightness and realization interesting solution, it is necessary to take a responsible approach to the selection colors. The shade of the base should be in full accordance with the theme and style of the interior.

4. To fix the shreds, you can use both the standard method - sew on a typewriter, and use glue designed to work with textiles.

5. The finished composition remains only to be inserted into the frame. You can make several such decorations from patches, then you get a modular panel on the wall.

As you can see, making a panel with your own hands is quite simple. This entertainment can be done with the family. This is especially true for children. When working with kids, do not forget to control their actions, since scissors are used in the process, and the child may get hurt.

Different techniques for creating paintings from patches (3 videos)

Today, decorating rooms with panels is gaining more and more popularity. Such an unusual decoration creates coziness in the house and brings a special atmosphere that favorably emphasizes the overall interior of the room.

The history of the appearance of the first decorative paintings dates back to the Middle Ages. Unlike paintings that were created on canvas, all kinds of materials were widely used for the manufacture of panels: shreds, paper, wood or various types of fabrics. Moreover, by combining several seemingly completely incompatible materials, skilled craftsmen managed to make canvases of extraordinary beauty.

From time immemorial, in order to correctly highlight the decoration of the house and emphasize unique image The interior used a variety of types of panels. Therefore, decorating surfaces with drawings and voluminous canvases made of fabrics was considered the best way decorate a room or facade.

Passing through the centuries, the art of creating tapestries and paintings from fabric has not lost its appeal at all.

Therefore, at present, thanks to the painstaking work of craftswomen, it will not be difficult to do it yourself, or to mass-produce a real masterpiece. And an excellent result is guaranteed if a person has a wonderful imagination and is sincerely interested in this decorative needlework.

Fabric panel on the wall (video)

How to make a New Year's panel from fabric

New Year is a special holiday when everyone congratulates each other and presents gifts. Therefore, on this day, a self-made New Year's panel will be a great surprise.

For example, Santa Claus depicted on the canvas carrying a Christmas tree will be an unforgettable gift.

To make such a panel you need:

Special frame with dimensions 12x17 cm.
Blue print fabric.
Leather different color. For clothes and hats of Santa Claus - red, and for the face - pink. In addition, you will need fabrics of white, green and golden colors.
Plain cardboard 12x17 cm.

It is necessary to cover the cardboard with chintz fabric. After that, it is necessary to make a three-dimensional silhouette of the future Santa Claus out of cardboard.

Using red fabric, clothes and a hat are cut out. For mustaches, beards, and also "fur" apply white material. By the way, the “fur” should be cut to make a fringe. For the manufacture of sledges, silver fabric is used. And the Christmas tree should consist of separate parts and have several shades.

To give volume to the individual parts of the figurine, it is recommended to hold them for a short time over the candle fire.

Having taken care of the blanks, you can start gluing all the details of the future panel. To make a high-quality canvas, the master needs to show imagination and try to express all his feelings on the fabric. A properly made New Year's applique will become great gift which will not leave anyone indifferent.

How to make a fabric wall panel

decorative panel from fabric, voluminous or regular size will become an interesting piece of furniture. And thanks to the existence huge selection such canvases everyone can choose the best option.

Some craftswomen prefer to create their own wall panels. Moreover, the whole process of making such a product is quite simple, and people who have never been engaged in needlework manage to create beautiful products.

Suitable for making decorative panels old frame, you can also use a sheet of thick cardboard or chipboard.

Woven fabric can be made in several ways.:

The prepared fabric is stretched onto the base, after which it must be wrapped on the reverse side and fixed well with glue. It remains to attach the resulting base to the frame.
From wooden slats it is necessary to make a frame. Next, the selected fabric is cut off, taking into account the allowance, and pulled onto a wooden blank. It is important to secure the material well on the reverse side with a stapler or nails.
For the manufacture of fabric panels, you can do without a frame, instead you need plywood. Foam rubber or synthetic winterizer should be attached to the front side. The resulting base is covered with a prepared fabric and is well fixed on the reverse side.

To decorate the resulting canvas, you can use different materials. Some sheathe the product with colored beads or buttons. In addition, you can make beautiful and colorful flowers from scraps, the panel will look good and become the highlight of the room.

For the manufacture of children's panels on the wall, craftswomen specially create pictures or drawings, taking into account the preferences of the child. A similar detail of decor in the nursery will make the room bright and colorful.

Panel with fabric flowers - an unusual room decoration

Before making a more complex panel, you should familiarize yourself with the technology of its creation. Today there are many master classes where there is step-by-step instruction, allowing even a beginner to surprise others with a real masterpiece.

For a canvas with flowers, it is important to pre-prepare all the materials necessary for work, and make a blank. Thanks to the use of a special scheme, the result of painstaking work will be a quality product.

To do beautiful flowers for the panel you will need pieces of bright fabrics. You should cut circles of different sizes, here pre-prepared templates will become assistants. After that, you need to collect all the resulting circles together (the smallest part will be the last on top), and then sew them together. A bead is attached in the center - this will be the final stage in creating a flower.

To make the edges of the product have a wavy shape, you can burn them a little with a candle flame.

A good solution for decorating the future canvas with flowers will be the spring theme. With help sewing machine individually, you can make bright green blades of grass, which will have different sizes.

Upon completion of the manufacture of all parts of the intended canvas, it remains to properly attach them to the base. For very thin details, it is recommended to use glue, and sew on flowers and blades of grass.

The flower does not have to be round. After all, its creation depends entirely on the imagination of the author.

Making a panel from shreds of fabric with your own hands

Fans of abstraction can independently prepare an unusual decoration on the wall from scraps. Such a peculiar picture will help to emphasize the interior of the room and will become the pride of the mistress-craftswoman.

To work, you need a frame with equal parties and several types of contrast material. In order not to get confused in the future, it is better to draw a diagram of the future product in advance and number all the stripes.

The pieces are cut into the right amount and attached to the base, strictly following the specified order. To make the composition interesting and bright, it is important to alternate colors correctly and take care of reliable fastening details. For this, it is recommended to use a special hot melt adhesive.

On the wall, a picture of shreds will look very good. Therefore, upon completion of work, it is necessary to fix the resulting product in a frame.

When choosing a fabric for a panel, you need to consider its color, as well as its structure. Silk material will stand out on the wall perfectly and expensively. And the fabric, which has a dense structure, is very comfortable to work with.

To avoid sagging thin shreds, it is recommended to put cardboard in them. In addition to this purpose, such tabs will help to avoid translucence of the material.

If you need to make an abstract spiral of scraps, it is better to make a template in the opposite direction. And then lay out all the strips strictly according to the scheme.

Fabric panel (video)

Some craftswomen manage to make beautiful works from the remnants of fabric. Therefore, it is not necessary to use only new material.

The kitchen is one of the favorite places in the house; it is there that the family spends a lot of time cooking, dining, or ordinary gatherings over a cup of tea. The desire to ennoble and bring some zest to the interior of this room is understandable. Today I will tell you, perhaps, the most a budget option to decorate the decor of the kitchen, namely, how to make a panel with your own hands from improvised materials.

Decoration features

What is a wall panel? This is a themed decoration (most often in beautiful frame), which can not only become a bright decorative accent, but also divide the room into functional zones.

But the main thing to remember is that it is not enough just to create a cute picture with an image. kitchen appliances, it is necessary that the panel blends perfectly with the existing interior.

Here are some examples of successful combinations:

For classic interior or Provence-style kitchens, paintings depicting fruits, vegetables or rural life are perfect. Panels made from dried flowers, cereals, spices or dried fruits look very impressive.

Art Nouveau style welcomes stylish graphic panels, which are dominated by rigor and minimalism.

Scandinavian cuisine can be decorated with homemade paintings made in contrasting colors. bright colors. Create your own panel and decorate it with sequins, buttons, rhinestones, threads, shells or pebbles.

A loft-style kitchen panel can be made from the simplest materials at hand: newspaper clippings, wine corks, pieces of chalk wallpaper, yellowed book pages.

Creating a kitchen panel

Well, let's move on from theory to practice. In this section, I have collected the most popular master classes on creating stylish and original panels. After reading the instructions, you will understand that it is not at all necessary to have some exceptional skills in order to create beautiful things.

Method 1. Decoupage

Thanks to the decoupage technique, literally every accessory in the house can be ennobled, giving it grace and uniqueness. Creating a panel for the kitchen will require you not so much special skills as accuracy and precision in movements.

To decorate the wall you need to stock up:

a small piece of fiberboard on which you will place the picture;
decoupage glue or ordinary PVA;
eggshell;
napkins with a selected pattern for decoupage;
primer;
sponges and brushes;
clean file;
acrylic paints.

I’ll clarify right away that before work it is still necessary to stock up on a share of patience, since time will have to pass between some stages.

We start decoupage by applying a primer to the fiberboard. Do it better thin layer so that it dries faster.

Next, you will need to give the future panel a volumetric texture. For this, crackle is created - crushed into many small pieces eggshell. Glue the base of the panel with a shell, making sure that there are small gaps between it.

When the shell is securely fixed and the glue dries, go over the surface with a primer.

Prepare a decoupage napkin. Place it on the set aside file with the pattern down and gently moisten with water using a wide brush. Attach a napkin to the primed surface, smooth out all the bumps with a brush and remove the file.

If necessary, you can highlight some fragments of the pattern with acrylic paints. After the pattern has dried, treat the surface with decoupage glue.

The main beauty of decoupage is that you are not limited in the subject of patterns - in special stores you can buy a lot of napkins with patterns for every taste.

Method 2. Shells

The maritime theme, beloved by many, can be easily embodied in a stylish panel. It will help to remind you of a pleasant vacation or just dip into memories of a warm summer.

What is required for a marine panel:

liquid Nails;
rigid base, preferably rounded (you can use old vinyl plastic);
flat stones and shells;
dark paint;
final varnish.

The instructions for creating it are quite simple, and its implementation will not take you much time:

Cover a solid base with a layer of the selected paint and let it dry.
Choose approximately the same size pebbles and shells and make an arbitrary composition from them.
Starting from the center and moving towards the edges, start gluing the material onto the liquid nails.
how final touch decorative works, open the panel with varnish. It will give the surface an attractive gloss.

Method 3. Buttons

How about an abstract wall panel of small bright buttons? Such an installation looks simply amazing, while the cost of its creation is minimal.

You only need:

buttons various sizes and flowers;
background paint of any color;
a piece of thick cardboard or fiberboard;
universal glue (not PVA);
beautiful frame for composition.

So, when everything is ready, you can start creating a panel.

Stick to the following sequence:

Cover the fiberboard with a thin layer of the selected paint. It will serve as a background for future compositions.
Start gluing the buttons to the surface, trying to fill the entire plane. You can show your imagination and lay out a more specific image from the buttons: fruits, a tree, or whatever comes to mind.
Insert the panel into the frame and hang it on the wall.

Method 4. Spices

Perhaps the most appropriate option for arranging kitchen design – beautiful picture, where the main elements are all kinds of cereals and spices.

To create such beauty, you will need to stock up:

frame;
cardboard;
baking paper or decorative paper;
PVA glue;
double-sided tape;
favorite spices at hand (coffee beans, tea, bay leaf, cinnamon, cloves, allspice, barberry, all kinds of cereals, etc.).

The process of creating a culinary panel will not cause you any problems and will not take much time:

From decorative thick paper (preferably coffee color) you need to cut a rectangle that fits the size of the frame. Slightly remember it to give more softness. To make the base more dense, glue it on a piece of cardboard of the appropriate size.

Glue pieces of dark and light paper to the base, which will shade the selected elements. Attach pieces of double-sided tape to them for large elements of the composition.

Lubricate the marked places with plenty of glue and sprinkle with selected spices. After the glue dries, gently shake off the excess spices so that they do not mix with each other and the panel looks neat.
When all the cereals and spices you have chosen are in place, we insert the panel into the frame and hang it on the wall.

Method 5. Sand

You will have no problems finding the basis for the sand panel. You can stock up on it at the nearest beach or at a hardware store.

In addition, for the manufacture of panels on the walls of the kitchen you will need:

cut of beautiful fabric;
stylish frame;
stencil with the selected pattern;
pen or marker;
toothpicks;
glue.

We stretch the fabric over the frame and fasten it.
Carefully transfer the design to the fabric.
Thoroughly coat the places necessary for the pattern with glue.
Gradually pour sand on previously glued areas.
With the help of a toothpick, we bring the last gloss, and correct the contours of the picture if the sand got behind them.
After waiting for the glue to dry, shake off the remaining sand and enjoy the result.

Basically, such simple technique can be slightly diversified by coloring the sand bright colors. But do not forget to let it dry and sift it thoroughly again.

Additional Decor Ideas

Creating a panel from improvised materials is fertile ground for the manifestation of all your imagination. The examples above are just a tiny fraction of what you can create as decorative embellishments.

Finally, I will give examples of a few more original installations that can decorate your kitchen.

Unused cutlery can easily act as wall decoration. From them you can lay out an imitation of a watch dial or create several identical small compositions.

Panels with dried plants and flowers will be a real highlight in the interior of a shabby chic or country style.

Remaining wine corks glued to the base and inserted into the frame - not less than original decoration. In addition, they can serve as a board for attaching small notes or culinary recipes.

Volumetric paper panels or sheets of the remaining magazines look unusual and cute.

The picture created with lace looks very elegant. Attach a piece of cloth to the base of the panel and paint them with a spray can. Then separate the lace and enjoy the intricate pattern left after it.

Outcome

As you can see, creating an original and beautiful decoration for the kitchen without any special financial costs is more than realistic. It is enough not to be lazy and not afraid to fantasize, but otherwise the proposed master classes and videos in this article will help you.

This is not only a way to apply all the accumulated ideas and give vent to wild imagination, it is also a great opportunity to create a truly individual design walls in your home, and as a gift, such a thing will always appeal to you! A sea of ideas and incarnations, the most interesting options, the use of various, sometimes very unexpected materials, helpful tips and recommendations - from the already familiar to you Helena the Immortal! Meet, learn, implement! Happy viewing!

Fast, cheap and easy. Fourteen ideas on how to make your home perfectly beautiful. panel on hastily. All ideas for NON-ARTISTS, that is, extremely simple. And they are designed to help you believe in yourself and make a panel with your own hands.

What is a panel, you ask, and what is it for? :) A lot of all sorts of differences fit the definition of "panel". We need to start from functionality. And the function of all the panels is the same, and the mother of Uncle Fyodor from the famous cartoon “Prostokvashino” spoke the homespun truth about it many years ago. Remember, there was such a dialogue. Dad asks what is the use of this useless picture on the wall? And my mother replies: “This picture is very useful. She closes a hole in the wall!” Roughly, of course, it is said, but it is a fact: the panels cover design gaps. It is far from being a painting, but it is no longer a piece of the wall. This is an item that seems useless, but at the same time remove it, and you will understand how the entire interior was fragmented into fragments. The panel is the final touch in the decoration of the house, giving chic and completeness to the look. These are several items, beautifully laid out and framed. That's all. The mystery is what and how to decompose.

Panel made of plastic micromosaic and rhinestones

A panel does not have to be a masterpiece. It should be a good spot of color, and located in right place. It has to match exactly your home, so it's silly to buy something more or less suitable. It is better to make a panel with your own hands, using what is under these hands and buying only what is necessary.

Let's look at several ways to make panels. Absolutely different. When you practice and understand what the principle is, then any other will not be a question! The only thing they have in common is the frame. The frame and base is canvas, like a painting. So.

We make panels ourselves

Idea number 1. Using Lightning

We find several zippers for clothes. We intertwine them in random order, focusing on color. Glue with super glue to the substrate. The panel is ready!

Idea number 2. Of the most common hair ties

We buy a lot of them, bright and different. Or we make, if there is something. Randomly attach to the substrate. I would not even glue, but fastened with pins. Such work will sooner or later become a chic gift for hundreds of girls.

You have already understood that the feature of these panels is the variety of colors with the uniformity of the form. That is, many identical objects of different colors. You can make your own perfectly with buttons, ribbons, bottle caps... the list goes on!

Idea number 3. Diversity of form

The central part of the composition is silicone spiders. Approximately the same as in the photo. Next, take three identical empty frames, paint in White color, with black paint we imitate birch bark. From a thread of the "iris" type we weave a "web": we cross 6 threads in the center, fasten them to the buttons to the sides of the frame. Then we tie knots in concentric shapes that form a web. We glue insects on top. Birch can be decorated with leaves, you can leave it like that. Voila!

Idea number 4. different size frames

In order not to be unfounded, we take them already 13. Frames that do not differ too much in size. And a Chinese regular alarm clock. At 12, we make applications according to the principle of patchwork in country style. That is, such cheerful little pictures are primitive. In the thirteenth, we make a hole in the center, insert the clockwork, turn it over, fasten the arrows, and they can be anything, even straws for a cocktail. We fasten the arrows through the hole to the mechanism. Don't screw it tight, the clock must run!

Even if you are too lazy to do such simple things, fasten finished watch to the wall and 12 patchwork frames around. Very nice decoration for the kitchen wall.

Idea number 5. Marine panel

Favorite topic for many of us. Need a sisal frame. We buy or do it ourselves. And a lot of sea souvenirs brought from vacation. We arrange it beautifully, glue it with superglue. It is only important not to shift the center of gravity. A hollow shell, a round bead will be difficult to glue with a small amount of glue. And if you pour a lot, even the most transparent, the untidiness of the work will simply repel. For this kind of work, we only use glue gun. He holds the parts together with silicone-based hot glue.

When we fix hollow parts with a thermal gun, we apply hot silicone so that it covers the edge well and goes inside the part, and not out.

Idea number 6. Triptych

Three stretchers of the same size are covered with fabric. Different flaps that communicate with each other either in color or pattern. This option is called textile decor.

Or fabric with large pattern we divide into three parts. In this case, stretchers can be taken different shapes. We fasten the fabric with buttons. Very thin and transparent is better not to take. But it is very interesting when such a triptych is consistent with the curtains.

Option: three shapes - one pattern

Idea number 7. Black and white panel

Anything you want but black and white. Ideal Solution for decorating a multicolored interior.

Idea number 8. Compositions of artificial or dried flowers

Need a frame with or without a backing and floral material. Flowers, even fake ones, are beautiful in their own right. So you need to work hard to spoil the composition. On inspiration, she will always be beautiful. Since dry petals are very fragile, feel free to cover the finished ikebana with Presto spray car varnish.

Idea number 9. Fruits, berries

A very fashionable theme is dry and artificial fruits, berries and spices. Sisal (palm fibers), nuts and branches will also fit well here. The principles are the same as in flower bouquets, but the emphasis is more on the clear outlines of the lines than on the color.

Idea number 10. Panel from CD disks

Give a second life to vinyl CDs. They lend themselves perfectly to painting and decoupage (details in the article Decoupage master class ), have a perfect round shape!

Idea number 11. Embroidery

It is not necessary to embroider with a cross or stitch. A wonderful crazy style gives ample opportunities (for more details about the crazy technique, see the article Crazy technique in the interior ). This means that we fasten what we want and how we want with the help of threads. Here is the embroidery. The main condition is stunning beauty.

Idea number 12. feng shui panel

A beautifully designed hieroglyph with a good meaning attracts happiness to the house according to the statement Chinese sages. Looking at how fast China is taking over the world, maybe it's worth a try? Cut a bamboo stick into 4 parts, tie it with a rope into a frame, pull a piece over the frame thick fabric, cardboard or leather. And draw a beautiful hieroglyph - happiness, love, wealth, good luck!

Hieroglyphs "happiness" and "money"

Idea number 13. Mosaic panels

We buy a decorative mosaic in an art salon, one set costs about 20 UAH. And post a cute picture. Mosaic always wins (details on working with mosaics in the article DIY mosaic ). It is also difficult to do badly, as is the case with flowers. Just do not rush to glue tightly, first lay out the drawing “dry” several times, play with mosaics. When you think that there is nowhere better, then take it on the glue.

Idea number 14. Abstract speed painting

We draw any bright things with construction paints and construction brushes. The main thing is to repeat this several times and remember that the colors should emphasize the interior colors. We add an accent for volume in the form of buttons, glass pebbles, etc. Why not charm!

As you yourself have already understood, a panel is something made in one breath, without painful preparations and efforts. Go ahead and decorate your home!

Many thanks to Elena for a very interesting article!

Good luck to everyone and endless creative inspiration!!

Making a wall panel with your own hands is a great opportunity not only to make a beautiful original decoration for an apartment, but also to bring an element of home warmth and individuality into the atmosphere. This decorative element is also used by designers to mask defects and surface irregularities, protect the coating from dirt, and also to visually increase the space. In order to make a panel from improvised materials with your own hands, you can use fabrics, leather, paper, photographs, threads, beads, bottle caps, mosaics, glass fragments, cereals, shells, stones and much more. In this article, we will look at some original ideas making a similar decor with the provision of their photos. Get inspired with us and boldly take on the decor of your home.

DIY shell panel

Resting on the seashore, children are very fond of collecting various shells scattered on the coast. But, when they come home, they often simply do not know what to do with them and how to apply them. Arranged in bags, shells and beautiful pebbles only replenish the contents of cabinets and shelves, where they remain on long years. But they can become excellent material to create a panel on the wall with your own hands. Big variety their shapes and colors will help create excellent compositions that will decorate any room, especially if the interior is decorated in a marine style.

Preparing to create a do-it-yourself wall panel from shells

A shell panel will require details such as: shells, a frame (you can use a photo frame, board or plywood), glue, acrylic paints (stain, nail polish). You will also need material for the background - fabric, burlap, mesh or sand. Depending on the sketch, additional elements may be present - beads, buttons, pebbles, rhinestones, etc.

First of all, the shells must be processed - washed, dried and sorted by type and size. In order to give them brightness, while leaving the same color, they can be covered with stain or clear nail polish. Some do-it-yourself panel drawings will require different colors. In this case, shells can be painted with acrylic paints, or a solution of potassium permanganate can be used as such. The frame can also be processed, for example, painted blue or white.

Various types of shells can be randomly arranged on a plane, which will look quite attractive, as shown in the photo. And you can create various drawings of the panel with your own hands, for example, a seascape, a ship, a doll, flowers, etc. In this case, you will need to make a preliminary sketch, on which then apply the prepared material.

DIY shell wall panel for beginners: photos and basic manufacturing processes

Let's start with the most simple models that even a child can do. For example, a chaotic drawing. To do this, you must first apply a background fabric or sand to the base with glue and assemble the frame. The background can be colored in any suitable color before gluing materials. Some paintings suggest monotony. In this case, the entire finished composition is already painted. Now we begin to glue a variety of shells. Additionally, you can decorate empty spaces with beads, threads and other improvised materials.

Quite beautiful (and we can see it in the photo) looks like a panel of shells in the form of a seascape. Making such a picture is easy, and it long time will be reminded of good rest by the sea.

Complicated do-it-yourself wall panel options from shells

Panels, like art paintings, can have a variety of subjects. For example, a panel of shells can depict a lush bouquet, which, as seen in the photo, will look very realistic and voluminous. To do this, it is better to give the shells different shades with the help of paints. Initially, suitable-sized shells are selected, from which buds are formed, and then the middle ones. As stems, you can use a thick thread or rows of beads.

Sea pebbles can transform such a picture in the most successful way. In the photo we see how elegant the panel of shells and stones looks.
If you want to depict an animal in a picture or create a portrait, you need to take care of a sufficient number of shells of the same size. Below are examples of such work.

DIY wall panel from coffee beans

A panel of coffee beans will perfectly decorate the interior of the kitchen, introducing an appropriate element of decor. Such paintings can also be designed for other rooms by selecting the appropriate pattern. These can be images of various cute animals for a children's room, beautiful hearts for bedrooms, etc. -gun), base in the form of plywood, a board or a photo frame, as well as additional elements: fabric for the background, felt rope, burlap, scissors and a pencil for creating a sketch.

Some craftsmen manage to form whole portraits and paintings from coffee beans, but such work already requires some skills, so it’s worth starting with simpler pictures.

DIY panel from buttons

Many housewives probably have whole boxes with various buttons left after worn things. They can lie like that for years, not finding a use for themselves, as junk, which is a pity to throw away. But with a little imagination and creativity, you can make a beautiful wall panel out of them with your own hands. For example, using the least requested, green and brown buttons various shades, you can create a wonderful "money" tree, as shown in the photo. At the same time, from improvised materials, only a board, glue and a pencil are needed to sketch a sketch. All this is available in any household, so the design of such a panel with your own hands will not entail material costs.

DIY wall panel made of wood

One of current trends interior design is the use of eco-materials, in particular wood. Under such conditions the best option decoration of an empty wall will be a decorative panel made of wood with your own hands. Let's look at how to make a panel with your own hands using tree branches.

All that will be needed is: a sheet of thick cardboard or chipboard, glue (it is better to use hot glue, which hardens very quickly), a hacksaw, varnish and brushes and, of course, branches different breeds trees of varying thickness. To decorate the frame, you can use wooden slats or a baguette.

The dimensions of the canvas depend only on personal preferences. Before you make a panel, you need to consider what shape it will have, dimensions and possible shades.

The frame is made first. Here you will need additional tool- a miter box that allows you to cut workpieces at an angle of 45 degrees. The finished frame is attached to the base with small nails or a stapler. Then we cut nickels from the branches, and the thickness can be different.

Finished blanks are laid out on the canvas in a chaotic manner, starting from the largest and ending with the smallest, which will fill the resulting voids. When everything is ready, and the canvas is completely filled, we proceed to gluing all the fragments. After that, you need to wait until the glue dries and apply a layer of varnish. It will serve as an additional decoration, making the picture glossy and, moreover, will create a protective layer against moisture and harmful insects. On this, the manufacture of panels with your own hands can be considered complete. The only thing left is to install it.

home > Metallurgy