Stands for phone table with hands. Mobile phone stand - how to do it yourself

When there are cute cozy little things in the house, it helps to create an atmosphere of warmth. Making something interesting and useful at the same time is not so difficult. Today, almost everyone has a mobile phone. When we return home, we most often put it on the table. It happens that we do not notice and throw paper or other things on top, and sometimes we completely lose it on the desktop. A do-it-yourself phone stand solves two problems at once: you can always make room for your phone and design it yourself.

How to make a phone stand?

You probably have at least one at home. cardboard box. From such waste material you can create something unique. We suggest making a phone stand out of paper and an old box.

For work, you need to prepare stationery glue, a pencil with a ruler, a knife.

Before you make a phone stand, you need to prepare the cardboard. We cut rectangles measuring 10x20cm. We need 9 of these blanks.

Now you need to glue them three by one.

On two we draw such a detail. This will be the sidewall of the do-it-yourself phone stand.

Cut out. In order for everything to be beautiful and the structure not to lose its stability, you need to lay the sidewalls one on top of the other and check how much they are the same.

We take a clerical knife and cut a hole in the form of a rectangle.

Next, you need to make the base for the stand for the phone with your own hands. We measure the width of the phone and cut out the stand from the third blank according to the size. The phone's width is the length of our rectangle. The width of the rectangle should be such that it can fit into the grooves on the sidewalls.

We assemble the structure. You will also need a small circle of cardboard, its diameter is slightly smaller than the distance between the sidewalls. (photo 8)

All blanks must be pasted over with paper. It can be newspaper clipping or scrapbooking paper.
To make the back, take two pencils or something similar. We make holes in the sidewalls and insert them there. On the axis we put our circle of cardboard.
Do-it-yourself mobile stand is ready!

Another do-it-yourself phone stand option

You can make a simpler version of such a cardboard stand.

In the world modern technologies It's hard to imagine a person who doesn't have mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is perfect solution for everybody.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials. In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

decorative ornaments

Correctly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for mobile.
Sequencing:

individual parts

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment; skills; the ability to work with wood. Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); simple pencil.

After everything necessary elements were at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

finished structure

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has unusual view, can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

You can make a small phone stand with your own hands from the simplest materials. Our small master class will help you in your work. Handmade items bring warmth and comfort to your home.

Such a funny cat phone stand is easy to make in one evening. To do this, we need fabric from old jeans to finish the cup, denim or any other fabric for the head, paws and tail.

For work you will need:

Denim fabric (stripes of different colors).
A piece of bright fabric for a scarf.
A little synthetic winterizer or cotton wool for paws, tail and head.
A glass of cotton swabs.
Bottom cardboard.
4 buttons.
Pencil, scissors, needle.

Let's get to work:

Take a sheet of paper and freehand draw a pattern. It's pretty simple, even if you can't draw. The head can be done like this: circle the bottom of your cup from under the cotton buds and step back a little from the edge. Get the head of a cat. Cut out the paper pattern. On it we will cut:

Head (with ears) - 2 parts,
paw-hand - 4 parts,
paw-leg - 4 parts,
tail - 2 parts.

We select materials:

Here is a box you need to take for work, it just fits perfectly in size:

Next, we will make bottoms for our stand. This chopstick cup has a bottom diameter of 8 cm. Yours may be different. For the outer bottom, we cut out a larger circle of cardboard, and for the inner bottom, 0.5 cm less than the bottom of the glass from under the sticks. Cut out a circle with a diameter of 7.5 cm from denim. Sweep along the edge with a thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand, take suitable fabric size 12 cm (glass height + allowances on each side of 2 cm) * 27 cm (circumference + allowances of 1 cm). We sew the fabric along the short side. We cut the allowances in the lower part of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk”.

Turn the top allowance on outside stands. We also fix it by dripping glue in a circle. If there is no glue available, use tape. Then we must draw the belly of the cat. For the top and bottom, trimmings from the legs are well suited. Lay out the strips and fasten them with pins.

Sew all the pieces along the short side. We put on our stand everything that we sewed. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew a large bottom. Make sure it doesn't protrude beyond the diameter of the glass. If the bottom is large, cut off the excess cardboard.

We put the cat pattern on the fabric from which you decided to sew it. Cut out a pattern from paper and fasten with pins to the fabric. Cut out, adding a 0.5 cm seam allowance.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with synthetic winterizer or cotton wool.

Sew paws, head and tail to the stand. The paws are sewn on at the top and fastened with buttons.

Sew pieces of denim on the tail.

We tie a bright bow around our cat's neck, you can put a sewn mouse or fish in the paws. If you want to give a product, then a souvenir, for example, smoking pipe.

How to make a cute and original phone stand out of paper, our small master class will tell. The stand can be made from the base: a cardboard ring left from the adhesive tape, an empty round box of chips, salt, coffee, or a cup of cotton buds.

Mobile phones have firmly entered our everyday life. Even children already use them from the very first grades of school. In order not to leave your gadget just on the table, consider how to make a phone stand from improvised materials.

First option: from binders

Let's figure out how to make a phone stand with your own hands from what is in almost every home. There are quite a few ways. In this master class, we will make it from binders (paper clips).

This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.

To work, you will need binders and a suction cup.

Production order:

Connect the binder to the suction cup (a towel holder will work too) in the place where the hook is located.
Attach the back of your phone to this suction cup when you need to put it down and you're done.

The advantage of this type is that you can place the phone in any position, both horizontally and vertically, or at an angle.

Second option: paper

When there are a lot of papers at hand different colors, then the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.

To work, you need 24 white checkmarks and 23 pink ones. Check marks are the simplest element of modular origami.

To make modules, do the following:

The triangular module is made up of rectangles to make them the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
Fold the rectangle in half.
And again in half, then unfold to make a fold line in the middle.
Bend the edges of the rectangle to this line, and those where the first fold line goes.
From below you have formed a ledge, bend its corners up to the edge of the first part.
Now bend the entire remaining lower canvas up to get an even triangle on the back side.
Fold it in half. And you will see that you have pockets on both sides.

Now let's move on to our question, how to make a phone stand from such modules:

Fasten white checkmarks in a circle.
Then place pink ones between each pair. So you get a cone tapering upward.
Continue assembling the structure to the desired height and you're done.

This the way is fine for those who like to work with paper using the modular origami technique, if you like to cut and paste everything more, then pay attention to the following model.

Third option: from a shampoo bottle

How to make a DIY phone stand from a shampoo bottle? The work will turn out very stylish, despite simple materials, it will look expensive, as if purchased.

Manufacturing progress:

Choose the right size shampoo bottle.
Make a line in the middle and cut along it. For convenience, it is better not to do it straight, but to leave a protrusion with a slot on the back side, so that you can not only install the stand on the table, but also hang it on the wall.
Take beautiful paper with an ornament (you can use a wrapper), wrap the stand with it and glue it.
Carefully cut off the excess wrapper around the outline. Your work is ready.

This craft will look great in your home, especially if you choose the right color and pattern for wrapping paper. You can independently come up with a form for such work or make according to the model. This was one of the many ways to make a phone stand.

Fourth option: from popsicle sticks

One of the most original variants how to make a phone stand is to use popsicle sticks. To do this, ask friends and relatives in advance not to throw out such sticks.

When you collect enough, they will need to be glued together:

first make the bottom;
then the backrest to the height of the phone;
the side ones will look good when tilted.

You can connect parts not only with glue, but also by gluing a transverse stick for greater strength.

There are many ways to make a phone stand from scrap materials. We have considered only a few of them. It all depends on your mood and imagination. Even from the old designer "Lego" you can make a great option or sew from thick fabric wonderful wall cover.

Use any idea. Enjoy your creativity!

There are many little things that help a lot in everyday life. Mobile phone holder is one of them. It makes it easy and convenient to use your phone wherever you are: in the apartment, car, at work or on the street. And how many times have you lost your phone under a pile of papers or things? The holder will help to cope with this problem, and your gadget will always be in sight.

What is a cell phone stand

A phone holder is not just a functional item, but also stylish accessory, decorating the desktop, car or bedside table. It is indispensable for different classes population and in any everyday situations: for housewives in the kitchen, motorists driving, business people at work, etc. Due to the variety of types and shapes of models, you can choose the one that suits your gadget.

materials

Manufacturers offer wide selection holders made from the following materials:

Paper. Thanks to the colors and types of paper, original origami-style holders are obtained that will decorate the interior.
Wood. popular, stylish solution, which will highlight the desktop. Wooden phone stand is convenient to use, practical, stable, durable.
Plastic. These holders are made of high quality, impact-resistant acrylic, so they will last for several years. The variety of shapes and colors will allow you to choose a stylish accessory.
Metal. Metal holders amaze with design and style. You can order a design of any size, color, shape and choose your own design.
Ceramics. A ceramic holder will not just gather dust - it can play the role of a useful figurine with a smartphone holder.

Execution

To surprise users, manufacturers come up with modern design solutions:

Ring-holder. Such creative solution became a real "know-how". With it, you can put the gadget on any surface and fix it on your hand by putting the ring on your finger.
wooden coasters with cutout for phone, tablet, charging. Stylish wood construction will appeal to lovers of stylish things. Laconic design, separate cells for a set of items will allow you to place the accessory in the office, on the street or in another room.
For lovers maritime theme produce coasters in the form of shells.
Fabric holders in the form of mini ottomans, armchairs are suitable for a female audience, and will also be a great gift.
The holder-pocket with a special hole will help you charge your smartphone. Charging is inserted into the hole and the socket, and the phone can be easily put into the pocket.
You can hang the fabric envelope anywhere and leave your smartphone there so as not to lose it.
Stands in the form of animals made of fabric, plastic, ceramics and other materials.
Magnetic holders for drivers.
The handbag is convenient for those who are on the road. It hangs on the dashboard of the car and has several compartments: for the phone, wallet, glasses, etc.

Styles

When choosing a phone stand, do not forget about the combination with the overall decor of the room. Try to find a unique style that will match the interior design. Don't forget about functionality and stability, which are important parameters for a holder. If you decide to make a stand yourself, then do not be afraid to experiment, because your imagination will help you create a versatile item!

You can choose one of the following styles:

Minimalism is suitable if the interior combines the simplicity of forms and the absence of complex elements.
Eclecticism. If several styles are mixed in the room that belong to different time periods, then choose the eclectic style. The main rule when creating is to find a link. For example, color scheme or general architectural design.
Modern style designed for fast people. If your interior is full of straight strict lines, simple flowers(beige, gray, white, black), a lot of light, then pick up the same stand. For example, metal.
Classic style. This includes wooden accessories that will fit perfectly into the interior with a fireplace, wood furniture, sculptures.

Kinds

Depending on the purpose, there are several types of phone stands:

On the table. The desktop holder is suitable for the desktop, highlights the status. Holders of this type are functional, reliable. Sometimes the stand is made 2 or 3 in one: for example, a smartphone, charger, watch or glasses can be easily installed in it.
Automotive. An indispensable thing that provides convenience and safety. They differ in fastening and type of construction. Each driver chooses for himself the bracket for the phone in the car that fits into his car.
For household purposes. In order not to carry the holder, which is installed on the table, buy another one - universal. He will become an assistant in the kitchen, in the nursery or even on the street.

Mobile phone stand

A wide range of online stores allows you to buy a phone stand suitable for your tasks. You can order any model from Moscow or another city. Manufacturers do not skimp on ideas, coming up with new design themes, shapes, convenient ways installations, exclusive inscriptions (for example, the image of the company logo). On the Internet you will find photos of the original coasters and choose the one that suits you.

On the table

The stylish Samdi Mobilephone Stand is made of natural wood. It will create comfort in any office and fit perfectly into your interior.

Model name: Samdi Mobilephone Stand.
Price: 1399 rubles.
Characteristics: size: 53x116x75 mm, weight: 30 g, material: wood.
Pros: natural material, handmade, suitable for all types of phones, vertical and horizontal arrangement gadget, stable design, stylish shape.
Cons: high cost.

Seebda Aluminum Foldable Phone is suitable not only for phone, but also for tablet, e-book. The foldable design makes the holder compact and the dedicated charging holes make it convenient to use.

Model Name: Seebda Aluminum Foldable Phone Bracket Table Stand.
Price: 2349 rubles.
Characteristics: size: 129x84x28 mm, weight: 201 g, material: aluminum.
Pros: foldable solid construction, stylish appearance, suitable for any device, there is a hole for charging, adjustable angle, protective pad against scratches, rubber feet do not scratch the table, suitable as a gift.
Cons: high cost.

Automotive

Inexpensive option in the car Blast BCH-101 will help to fix your smartphone, navigator or player. It is easy to install, remove and does not require use additional tools.

Model name: Blast BCH-101.
Price: 149 rubles.
Characteristics: installation on the ventilation grill, rotation angle: 360°, material: plastic.
Pros: low cost, easy installation, suitable for any phone.
Cons: not durable.

The more expensive Kenu Airbase Pro Suction Mount has stylish design and is suitable for smartphones, navigators with a diagonal of up to 6 inches.

Model Name: Kenu Airbase Pro Suction Mount.
Price: 2090 rubles.
Specifications: size: 70x101x80 mm, weight: 72 g, material: stainless steel, plastic, panel mounting or windshield, rotation angle: 360°.
Pros: durable material, suction cup fixation, shock-resistant case, sliding side clips hold the gadget securely, rotary mechanism.
Cons: none.

Universal

The Nite Ize QuikStand holder fits any device. It is light and thin in design, and its size is comparable to the size of a credit card.

Model Name: Nite Ize QuikStand Mobile Device Stand.
Price: 616 rubles.
Characteristics: size: 86x50x2.5 mm, weight: 10 g, material: plastic.
Pros: compact, easy to carry in a wallet or case, fits all gadgets, adjustable angle.
Cons: short-lived design.

PolliMolli is distinguished by its original performance. It is completely made of water-repellent fabric and has antistatic properties.

Model name: PolliMolli Navy.
Price: 100 rubles.
Characteristics: manufacturer: Enebrain, country: Korea, material: fabric similar to natural suede.
Pros: creative design, a variety of colors, the ability to put on any surface, choose the angle of inclination, suitable for all phones, low price.
Cons: short lived.

How to choose a phone holder

When buying, pay attention to the following points:

Material. If you need a durable design, then it is better to choose a metal or wooden model.
Fastening method. Especially important for drivers. Think about where in the car you want to place the tripod. In no case should it block the road or impair visibility.
The size. Not all coasters are designed for different models phones, so consider the size of your gadgets.
Design. Select suitable style for your office.
Price. Expensive models are more durable and will serve you for a year.
Charging hole. A handy addition doesn't hurt.

DIY phone stand

Using improvised means, you can make a stand with your own hands. Self assembly has several clear advantages: exclusive design, saving money, developing imagination. You can involve a child in this process, create your own collection - you will get great entertainment! Making an accessory from household items is not so difficult, but it all depends on the material from which you want to build it.

From cardboard

If a cardboard box is lying around in the apartment, then you can quickly build a cardboard stand. Prepare stationery glue, pencil, ruler, knife and follow the instructions:

Cut 9 cardboard rectangles 10x20 cm in size, glue them in 3 pieces.
On two pieces of cardboard, draw a template for the side supports. Make the shape the way you want.
Cut out ready-made templates sides, in each make a small rectangular hole.
Cut the third piece of cardboard to fit your phone.
If you want to decorate the future stand, you can paste over the cardboard parts with colored paper.
Pass the third cardboard through the prepared holes in the side parts. Your stand is ready!

From pencils

original stand from pencils can be done in the following way:

Prepare 6 pencils (construction pencils are best), 4 stationery rubber bands.
Connect 3 pencils with an elastic band at the top.
Attach the fourth pencil on the edge, forming a triangle.
Attach the remaining pencils to the sides. You should get a three-dimensional geometric figure.

From paper clips

For the staple holder you will need 2 staples, pliers, glue, a plastic card. Instead of paper clips, you can use a binder:

You need to bend and unbend the paper clips so that the smartphone can be held on them. Photos can be found on the Internet.
Glue the card between the paper clips. The holder is ready.

From glasses

You can also make a holder out of unnecessary glasses:

Place the glasses with the temples up.
The arms must be crossed so that they form a triangle with the frame.
Lay your smartphone on its side, one side on the temples, the other on the frame.

From the cassettes

You can find another purpose for old cassettes - they will make an excellent stand:

Open the box so that you can insert your gadget into the cassette hole.
Show your imagination, decorate the cassette holder. For example, paint it with paint.

From plastic bottles

Using a bottle, you can make a convenient holder for phone charging:

Cut off the bottom of the bottle, and cut out a rectangle on the front side.
The lid and plastic bezel can be discarded.
If the bottle is transparent, you can decorate it with stained glass paints or ordinary watercolors.
On the other side of the bottle, carefully cut out a charging hole.
Pass the wire through the neck, and the charging itself into the outlet. Put your phone in the prepared pocket.