What can be pasted on adhesive tape. How to glue an old cabinet with self-adhesive film

The article describes where self-adhesive film is used, its varieties, advantages and disadvantages, principles of pasting smooth walls and corners.

The technology of pasting walls with self-adhesive film

Self-adhesive moisture-proof film is thin, its front side consists of polyvinyl chloride with polyester, and polyester makes it shiny and durable. On the reverse side, it is impregnated with glue.

Features of choice for the bathroom

You can purchase rolls with a width of 45 cm to 90. The length of a roll can be from 2 m to 15 m. The material can have a pastel shade or be bright, with a pattern, ornament. It happens as a glossy material, and matte, smooth or rough. It can mimic:

tapestry;
a rock;
wood;
the cloth;
ceramics;
canvas;
mirror, gold and silver surface.

A material having a fluorescent effect may be sold.

When buying a bath film, you should carefully read the instructions. Only material that can withstand high humidity is suitable.

The marking is made in the form of waves: wave 1 means moisture resistance, wave 2 means that it can be washed, wave 3 means that it can be washed with any composition. If a brush and 1 wave are drawn, then the material can be wiped with a non-rigid brush and gentle detergents. If the brush has 3 waves, then it is difficult to mechanically damage it, it is possible to clean it with fine abrasive products.

Self-adhesive wallpaper for kitchen and bathroom: varieties

Cork wallpaper. They are made of artificial materials, have a wax coating, similar to natural cork. They will last a very long time (up to 20 years). Keep warm in the room, do not drown out extraneous sounds. They do not change their appearance, they are antistatic.
Self-adhesive PVC film. It stretches great and is very durable. Sold in one tone or with a pattern, matte, glossy. She paste over the walls, furniture, door frames.
Photowall-paper on an adhesive basis.
Satin self-adhesive wallpaper imitates fabric.
film with special coating. You can draw on it with chalk or a marker.
Self-adhesive wallpaper imitating wood flooring, brick, marble, leather.

First you need to choose a shade and pattern of the material so that it is combined with other details of the bathroom and kitchen.

The bathroom looks good, pasted over with a material of the same color with a slightly rough surface. You can choose prints with a seascape.

Self-adhesive film can glue not only the walls in the bathroom, but also pipes

Advantages

People choose self-adhesive film as a finish, as it has the following advantages:

After gluing, it will protect the walls from water ingress.
It quietly replaces washable vinyl wallpaper.
Can withstand high temperatures (up to 80°C).
Calmly tolerates sudden changes in air temperature.
Adheres well to various walls: from wood, plaster, metal, drywall, glass.
They sell a variety of material, it can be matte and glossy, plain and patterned, pastel and bright colors, can imitate wood, brick.
It is easy to attach to the surface, no need to purchase glue.
He has good performance.
Maintenance is minimal.
It's cheap and always in stock.

True, it also has disadvantages:

It will last in the bathroom for about 3 years.
Its surface is not breathable, so air does not enter the wall. Therefore, condensation and mold may appear on the wall. Because of this, before attaching the material, treat the surfaces with a primer that has the necessary properties.

How to glue a self-adhesive film with your own hands: steps

Instruments:

mounting knife;
scissors;
pen-pencil;
ruler;
tape measure;
felt spatula;
construction dryer.

A hair dryer is needed to warm up the film, then it will stick perfectly to the wall. A felt spatula will serve to correct the application, smoothing the walls so that there are no air bubbles.

What surface can be pasted on?

First of all, you should prepare the walls:

If the walls have irregularities, then they are sanded, since the glued material is thin and can display all the irregularities.
If the walls are made of wood, then they are sanded and coated with varnish.
Metal surfaces must be primed. Apply 2 coats of acrylic based primer.
Drywall needs to be puttied and cleaned.
The walls must be cleaned of dust and dirt, degreased with water.
If the rays of the sun constantly fall on the wall, there are sharp changes in air temperature, then you need to purchase a film that has long term services.

When Not to Glue

It is impossible to glue the material to a surface that has protrusions, depressions, as the material is very thin and all defects will be visible. Therefore, before gluing, the walls should be treated, primed, puttied.

You should not stick to old wallpaper, as the film sticks to them much worse than to the putty surface, and especially in the kitchen, as fat settles on the old wallpaper, which cannot be cleaned off. It will be a little better if you stick a new film on the old one, but even then it will be poorly glued. In addition, the old film may delaminate.

How to stick on a flat wall

Mark up the material. To do this, first draw squares on the wrong side.
You need to cut the roll. An extra 2 cm should be left at the top and bottom. If there is a pattern with rapport, then you need to cut off a piece on the front side. If a pattern in the form of a tile is applied to the material, then it is cut at the seams of the tile.
It is necessary to detach a piece of paper 3-3.5 cm from the film, and attach the adhesive sheet to the wall and glue the separated part.
Then slowly but evenly pull the paper off the material with one hand, and with the other hand smooth the piece on the wall with a felt spatula with movements from the center to the edges.
Cut off excess material with a knife.
The next strip is glued so that it overlaps with the previous one by 1 cm.
If the film is already glued, but there are a small amount of air bubbles, then it is necessary to pierce them with a thick needle, and then carefully smooth them out with a spatula.
If the film sticks to the surface, but wrinkles appear, then it is required to tear it off with a sharp movement, and then glue it again.
It is impossible for the roll to stick together, since it is difficult to separate it.
The glue will dry only after 3-4 hours.
If the film is placed on a relief wall, then it is advised to use a building hair dryer for drying.
Heat the film, holding the hair dryer at some distance so that it does not overheat, otherwise the surface may turn black, melt or weld to the wall. You should constantly move the hair dryer, do not linger in one place.
If the wall is exposed at the joints, then it is worth increasing the overlap of one canvas to another up to 3 cm.
If you are pasting large surfaces, you can apply some wallpaper paste on them. And until the glue dries, then stick the film.
If the film sticks too quickly, then it is worth powdering the walls with talcum powder. Then the film will not stick very quickly, there will be time for its location as required.

How to glue in the corners

You should cut off a piece and attach it so that it goes 10 cm to another wall.

Glue the film on the other wall in the same way. Then it will be glued with an overlap. And then cut off the excess. Iron the film with a building hair dryer.

Is it possible to glue adhesive wallpaper in other rooms

The film has one small drawback - it does not let air through. Because of this, condensation may appear on the wall. Therefore, it is necessary to pre-treat the walls with a primer that has certain characteristics. And then you can glue the walls in any room, even in the nursery.

Self-adhesive film can also be pasted over furniture. To do this, buy a film that imitates the texture of wood. She will do more long term exploitation old shelf, table, cabinet. You can glue the door frames or window sills with material.

How to care

You can wash the film with a damp sponge. Small stains can be removed with neutral detergents. If the spots are large, then you should try to remove them with alcohol.

When washing the film, do not use aggressive solvents and abrasives with a large fraction.

Self-adhesive film is easy to stick on the wall, it is cheap but practical, it is easy to wash it to remove dirt and dust.

Useful video

Since gluing traditional wallpaper is associated with an operation that is unloved for many - applying glue, manufacturers have offered customers an easier way to finish walls and furniture. Self-adhesive wallpaper, which in everyday life is often called a film or self-adhesive, initially has an adhesive base on the back side, so the process of applying the canvas to the surface is in many ways similar to attaching a regular sticker. Although such material appeared on the market a long time ago, it became really popular only after a significant expansion of the color palette and textures, which made it possible to create unique interior without significant financial and labor costs.

Environmentally friendly - the basis of the material is made from natural elements and does not contain chemicals harmful to health.
Fire resistance - the main component of most films is polyvinyl chloride (PVC), which is classified as a difficult-to-ignite substance that does not support combustion.
Availability - self-adhesive is one of the most inexpensive finishing materials.
Moisture resistance - self-adhesive wallpapers perfectly resist moisture, so they can be glued not only in the room, but also in rooms with increased level humidity (kitchen, bathroom, toilet).

Note! Moisture resistance can turn from an advantage into a disadvantage if you paste over a “cold” wall with such wallpaper. In this case, the condensate formed due to the temperature difference will accumulate under the film due to the waterproof barrier, creating conditions for the development of fungus and mold.

Modern films allow you to imitate any finish

It should be emphasized that the films are very demanding on the quality of the surface. Any irregularities will be clearly visible, so it is necessary to apply such material on an ideal plane. To a lesser extent, this applies to cork and fabric self-adhesives, but they also cost an order of magnitude more expensive than conventional PVC films.

Self-adhesive wallpapers adhere perfectly to plasterboard walls, furniture, plywood and ceramic tiles

Types of self-adhesives

The choice of wallpaper with a self-adhesive base is quite large, which allows you to choose the best option for your interior. If conditionally put out of brackets color solutions, then all self-adhesives can be divided into three groups:

satin;
cork;

Satin wallpaper

The basis of satin self-adhesive wallpaper is fabric material, which is quite dense in structure. As a rule, it has a matte surface, therefore it does not create glare and is able to hide small surface irregularities. The fabric is well tolerated by mechanical and chemical influences, does not crack over time, does not stretch or tear, therefore it is often used for making detailed images, in particular photo wallpapers.

Photo on adhesive film with a fabric backing will remain unchanged even after several years

Cork wallpaper

Cork is a unique material that has beautiful texture and is durable. Due to the wax impregnation, cork self-adhesive wallpapers are suitable for walls in the living area, as well as for kitchens and bathrooms, as they do not absorb odors and moisture. Despite the fact that the layer of the cork itself rarely exceeds 1 mm, this type of finish is considered one of the most durable, enduring various mechanical loads.

Cork looks stylish and harmonious in almost any interior.

PVC film

Most cheap way interior renovation - apply self-adhesive PVC film to furniture or walls. The basis of this material is a layer of polyvinyl chloride, which is absolutely waterproof and can withstand temperatures up to 80 ° C. Except affordable price, the advantage of PVC film is to provide a wide variety of options. She can:

imitate wood, stone, marble or fabric;
be matte, glossy, mirror or have a metallic sheen;
display an original pattern, drawing, or photograph.

PVC film will satisfy any design fantasy

Wallpapering process

To stick a self-adhesive film on walls or furniture, it is not necessary to have professional building skills. You should only take the process seriously, carefully and carefully following all the points of the instructions below.

Preparatory activities

The success of wallpapering largely depends on the quality preparatory work. The main condition is that the surface must be smooth and not have visible flaws.

From the walls, you must first remove the old coating, level with two layers of putty (starting and finishing) and prime the surface. Furniture preparation is less complicated. In this case, it is enough to thoroughly clean and degrease the coating.

Important! To clean and degrease furniture, do not use a cloth that leaves behind a lint.

In the case of placing self-adhesive wallpaper in a certain area, for example, in the center of the wall, you must first mark it with a ruler and a pencil. Orientation horizontal lines should be performed strictly parallel to the ceiling, and vertical ones - to adjacent walls, since even a slight deviation from the parallel will lead to visual dissonance.

If the position of the walls and ceiling is correct, then it is enough to use building level

Roll cutting

With back side The self-adhesives have a special marking, which makes the process of cutting the roll quite comfortable. However, this approach is convenient when using plain wallpaper, while in the case of imitation tiles or, for example, a complex pattern, it is better to cut the canvas from the front side so as not to cut the image in the wrong place.

Cutting can be done with well-sharpened scissors. However, to get the perfect line, it is better to use a construction knife and a ruler.

For ease of cutting, manufacturers of self-adhesive films place square markings on the protective layer.

Surface pasting

By itself, the technology of mounting self-adhesive wallpaper on a wall or furniture is not complicated. At the same time, it requires accuracy and does not tolerate haste.

Take the prepared strip, remove 2-3 cm of the protective layer from the upper edge and apply it to the surface to be glued, observing the level.

Lock tightly upper part wallpaper with a soft squeegee or dry sponge.

Gradually removing the protection, press the adhesive base to the plane. To avoid air bubbles and folds, the canvas should be leveled from top to bottom and from the central part to the edges.

After the sheet is completely glued to the surface, check for any mounting defects. Small air bubbles can be gently pierced with a needle, after which it is necessary to carefully smooth out a specific place.

Note! The drying time of the adhesive, with which the film is fixed to the wall or other material, is on average 24 hours. Therefore, in case of detection of visible flaws, the wallpaper can be immediately re-pasted.

Video: how to glue a self-adhesive film

It is not difficult to glue self-adhesive wallpaper on the prepared wall and furniture in general. However, in the course of work, non-standard situations are not ruled out, which can confuse a novice master. Consider how to solve problems with dignity and not make mistakes.

How to glue the corners of furniture

Sometimes when pasting furniture facades it is necessary to close with self-adhesive not only the front, but also the end part. If there should be no problems directly with the ends, then not everyone can get around the corners without folds.

Some instructions suggest applying heat to the film with a hair dryer. Indeed, after exposure to temperature, it becomes more elastic, which avoids wrinkles on various irregularities. However, in this case, it should be taken into account that when overheated, the film may lose its strength characteristics, which increases the likelihood of premature detachment.

To prevent this and beautifully paste over the corners of the furniture, you just need to cut them correctly. An incision is made along the line of one of the ends (as shown in the photo), after which one part of the film goes around the corner and is applied to the adjacent end, and the second part is superimposed on top. In this case, a neat seam is obtained in the corner in the absence of any folds.

Is it possible to glue the film on the film or other wallpaper

If the repair is done “quickly”, then delete old finish not everyone wants. However, no matter how laborious such work looks, it will still have to be done, since self-adhesive wallpapers on traditional wallpapers fit much worse than on a primed wall. This is especially true of the kitchen, where the finish is constantly exposed to fatty vapors, which are extremely difficult to neutralize even with the help of the strongest degreasing agents.

Things are somewhat better with sticking film on film. But even in this case, adhesion will not be maximum. In addition, you need to understand that the durability of such a finish will be determined by the old layer, which may begin to peel off much earlier due to increased load.

In order to glue the door with a self-adhesive film, it is necessary not only to choose the right material, but also to carefully study the technology. Otherwise, the result may turn out to be worse than the initial state: numerous air bubbles, diverging joints, uneven patterns. Proper pasting of doors involves careful surface preparation, as well as the use of a small set of tools.

Self-adhesive film of various colors and textures

Types of self-adhesive films

Furniture self-adhesive film is classified according to a number of characteristics:

Base material - polyester, polyvinyl chloride, propylene, fabric and paper;
Structure - single-layer and two-layer;
Type of surface - glossy, matte, mirror, transparent and holographic;
Decorative qualities - many options for textures and colors.

To paste over interior doors, choose self-adhesive wallpaper on a synthetic basis, which gives the greatest elasticity in work. Glossy or matte coating self-adhesive film can have any shade, but most often they use colors for a natural array.

Advantages and disadvantages of films

Self-adhesive film is a versatile and inexpensive material. Subject to the gluing technology and proper selection of the source material, you can get an excellent decorative effect. The advantages of films include:

Strength;
Durability;
moisture resistance;
Ease of maintenance;
Resistant to direct sunlight;
A very large palette of colors and textures.

All glasses interior door covered with self-adhesive film

Self-adhesive wallpaper does not damage the surface of the door at all, so it can be considered as a temporary coating. The main disadvantages of this material include the need for careful surface treatment before gluing, the inability to re-glue the same material, as well as the film peeling off if the gluing technology is not followed.

The technology of pasting the door with self-adhesive film

Self-adhesive film for doors requires preparation of the workplace. To glue the door, it is better to remove it from the hinges, place it on a flat surface (on a table or stools), remove the handle. If the interior door has glass, it must be carefully removed. It is also worth preparing a set of tools in advance that will help you get the highest quality result.

We unscrew the hinges, lock and door handle with a screwdriver or screwdriver

Required Tools

The process of pasting with self-adhesive wallpaper requires the following tools and materials:

Sandpaper, primer, brush and putty, depending on the condition door leaf;
Ruler, corner, tape measure;
Vial with degreaser;
Marker, pen or pencil;
Scissors or stationery knife;
Rubber spatula;
Sprayer for water.

Surface preparation

In order to paste over the surface of the door with self-adhesive wallpaper, it is important to remove all irregularities on the canvas. Self-adhesive wallpapers - very thin material, through which all the cracks and sagging on the old coating will be visible.

Preparing the door for filming with a degreaser treatment

The main stages of surface preparation are grinding and degreasing. Surface preparation depends on the finishing materials that the door was previously covered with. If it is old cracked paint, then it should be completely removed, and wooden canvas handle sandpaper.

The lacquer coating can not be completely removed, it is enough to walk several times with fine sandpaper to eliminate minor defects.

The most simple and convenient way degreasing the door - soapy water. It should be applied to everyone, even the most small plot glued surface. Soap solution can be prepared from dishwashing detergent or liquid soap. You can also use a bottle of special degreaser purchased at a hardware store.

Puttied and sanded with zero door, ready for pasting

If there are significant defects: chips, cracks, holes from fasteners, the door must be puttied on the front and back sides. The layer of putty after that must be primed.

Film wrapping the door

After the preparation of the door leaf is completed, you can begin the process of wallpapering. It will consist of four simple steps:

Markup. It is applied on the reverse side of the self-adhesive film, where there is always an auxiliary marking. When measuring width and length required sheet it is worth making a margin on the ends.
Open the self-adhesive sheet. In order to carefully paste over the door, it is necessary to cut the sheet of wallpaper as evenly as possible according to preliminary markings. To do this, it is best to use large scissors or a clerical knife.
Pasting. First of all, it is necessary to separate 10-15 cm of the self-adhesive film from the protective paper and paste over the upper edge of the door leaf, turning it over the end by the amount of the pre-made margin.
Next, you need to gradually peel off the paper and smooth the film in the direction from top to bottom and to the sides. To do this, you can use a rubber spatula or rags.
Processing corners and ends of self-adhesive wallpaper. Corners and ends must be glued, carefully pressed and, if necessary, trimmed for perfect styling.

In order to easily adjust the position of the self-adhesive film on the interior door, it is worth treating the surface with soapy water before pasting. Another secret is the use of a hair dryer in hot air mode in order to paste over the ledges and corners: when heated, the film will soften a little and securely fix on a difficult area.

How to remove self-adhesive film from a door

For removing self-adhesive wallpaper it is important to thoroughly warm the entire surface. To do this, you can use a hot air stream (hair dryer) or hot water. After the self-adhesive wallpaper becomes softer, they must be pry off and removed from the canvas. Adhesive residues can be easily removed with alcohol.

With the help of self-adhesive film, the bathroom can be transformed beyond recognition.

The only trouble is actually with its gluing, very often after pasting it just falls off. Here the problem can lie in two reasons:

1 reason

In the film itself, or rather in the adhesive composition with which it is processed, it may simply be old or of poor quality. How to check the expiration date, especially if the goods are ordered from China, I myself did not understand, but in the store the seller must show you the documents for the goods, and on the label, if it has not been re-glued, there should be a release date.

2 reason

Walls, or rather their surface. Self-adhesive film adheres pretty well to any objects, if they are clean. Therefore, before proceeding with gluing, first clean the wall of debris with a stiff brush, if necessary, you can also use a brush with a metal bristle.

After washing with the product, rinse well with water and dry the wall so that there is not even a hint of moisture.

Now let's move on to washing the wall with a solvent, it is better to apply it through a dispenser and wipe it with a cotton rag without lint and threads. Dry the wall after the solvent.

It is best to glue from below, it’s easier for me, but you can from any side. Tear off the edge of the protective layer and gluing slowly pull back protective layer, and the assistant should smooth the film from the place of the already glued film to the side of gluing with a rubber roller so that bubbles do not form. Then, in order to remove them, you will have to spoil the film itself with a needle, no matter how sharp the needle is, but traces remain.

How often do you want to bring something new to the interior of your home, refresh the look of the room? It is human nature to constantly change the space around him. But it is not always possible to afford drastic changes.

It is in such cases that simple and inexpensive ways, for example, pasting with self-adhesive film. This material, which appeared on the market for a long time, has recently become increasingly popular. Due to low cost, wide color scheme and the abundance of patterns, and most importantly - ease of use, the film is often used in interior decoration.

Like any material, self-adhesive film has its own characteristics and requires a certain approach. In this article, we will consider in detail the technology of sticking a film on various surfaces.

Self-adhesive film: material features

Now there are many types of self-adhesive film for any surface: cars, walls in any room, even in the kitchen and bathroom. They are united by the fact that adhesive tape technology is used in the manufacture, combining the qualities of adhesive tape and wallpaper.

Using self-adhesive film, you can not only apply various design solutions. This material has several advantages:

moisture resistance;
resistance to high temperatures - up to 80 degrees;
a variety of not only patterns, but also textures;
low cost;
ease of use;
easy care of the glued surface.

Also to distinctive features self-adhesive film can also be attributed to the fact that it can be applied to any surface: wood, glass, metal, plastic, cork, ceramic tiles, plywood, drywall.

The only difficulty that you may have when working with this material is the need to level the surface pasted over with a film. All defects and irregularities should be carefully eliminated, otherwise, over time, the film may bubble and peel off in places.

But sticking the film itself is a simple task and does not require any skills. All you need is patience, a little time and a reliable assistant in case you are pasting a large surface, as well as the following tools:

pencil;
ruler;
scissors;
mounting knife;
felt spatula or special ratel;
industrial dryer.

Please note: warm up thoroughly with building hair dryer not only the corners and joints of the glued surface, but also the entire glued film around the perimeter.

What rooms can be used?

As mentioned above, self-adhesive film is not afraid of moisture and high temperatures, and it is completely unpretentious in care. Therefore, it can be used to decorate absolutely any premises and in them, and even household appliances.

In the kitchen, especially if you live in a private home, self-adhesive film will not only help you update the interior as often as you see fit and without special costs, but will also serve to maintain cleanliness and tidiness. As you know, it is kitchen surfaces that are often contaminated and deteriorated during use. The easiest way to fix this is with a self-adhesive film.
For the bathroom and toilet, pasting with self-adhesive film is also the best option. This material will protect the walls from excess moisture and spray soapy water which can be easily wiped off the surface.
Do you have small deli? Then you know how much trouble their love of drawing on any surface causes. It is much easier to erase traces of paint or felt-tip pens from a self-adhesive film than from wallpaper or fabric upholstery walls. AT last resort, you can re-glue the film, which will cost you very little.
In fact, self-adhesive film - great material for, and no matter how old the child is, he goes to Kindergarten or finish school. The kid will have fun in a room with bright colors, and the teenager will be able to independently work on the interior of the room.
If you decide to use film for pasting interior items, such as chairs, tables, cabinets, chests of drawers, then a modern range of colors and patterns for this material will help you not only update appearance rooms, but also completely change the style. In the photo you can see a lot of options that you can use in your work.

Tip: when choosing a film, pay attention to what surface you will use it for. For example, for vintage furniture a transparent self-adhesive is suitable, which will help get rid of scuffs and minor scratches without changing the color and structure of the wood. Mosaic patterns are perfect for glass.

Self-adhesive film is very easy to care for. Usually this is enough warm water and detergent. It is undesirable to use cleaning powders, as well as solvents - they will damage both the structure of the film and its color. If the contamination is sufficiently stable, use ethyl alcohol.

The initial stage of work: we prepare the surface, cut the film correctly

Before gluing the self-adhesive film, carefully prepare the surface. It must be cleaned well, degreased with alcohol or gasoline, and dried. The most convenient basis for applying the film is a smooth surface with lacquered. If the surface is matte and rough, it is better to cover it with polyester or primer varnish. It can be replaced with methyl wallpaper glue.
The surface of, fabric, chipboard, plaster must be wiped and cleaned of dust and particles of material. If necessary, use putty and acrylic primer. This will ensure good fixing of the film for a long time.
If you plan to paste over a glass or metal surface, then the base needs to be slightly moistened.
Correctly cut the film into parts of the desired size will help you applied on the reverse side of the centimeter grid. Mark it on it, and leaving a margin of a couple of centimeters, cut it with scissors or a special knife.
You also need to cut the film correctly, this process has its own tricks depending on the pattern. For example, if the pattern on the film is stylized, it is better to cut along the “seams”. In the case of applying a pattern with rapport, you need to cut it on the front side.

The instructions for the self-adhesive film describe the gluing process in sufficient detail. You can see in practice that it is very simple and does not require much time. But be careful and be careful when working so as not to make many mistakes that will have to be corrected.

Take the prepared “pattern”, and separate the film from the paper backing by literally 5 cm. Attach the sticky side to the surface to be pasted in such a way that the shape and dimensions exactly match.
Carefully, slowly, separate the substrate from the film, while spreading the film over the surface and smoothing it dry soft cloth. The principle of smoothing is the same as with: from the center to the edges of the canvas. This way you can avoid the formation of air bubbles.
If you notice any mistake during the work, then you need to correct it immediately. Peel off the film and smooth it over the surface until it has firmly set. Otherwise, the work will have to be completely redone.

In the event that you paste large area make sure that the surface to be treated absorbs moisture well. Clean and dry the wall on which the self-adhesive film is applied, cover with a layer of wallpaper paste and, without waiting for drying, distribute the film, adjusting to size. After that, iron the film with a dry soft cloth.

Please note that if you have purchased a film that adheres almost instantly to the surface, this can be inconvenient when you need to adjust the dimensions. Talc and powder can help with this, they will slow down adhesion. The resulting air bubbles must be pierced and gently smoothed out.

If you decide to paste over surfaces made of metal or synthetic materials, moisten them with water and a small amount of detergent or soapy water. Separate the paper backing and the film completely, apply to a damp surface, the solution helps to properly fit the film to the desired dimensions. Then dry thoroughly with a sponge or soft cloth.

How to remove self-adhesive film?

Over time, you may get bored with the coloring or pattern, you want to update the interior again, and the question arises: how to remove the self-adhesive film without damaging the surface on which it is applied?

Self-adhesive film is a very durable material, and it has earned its popularity precisely because of its durability. It is not recommended to produce it - coloring agents will unevenly lie on the surface. Sticking a new layer on top of the old one is also not the most convenient option. Therefore, you will need to remove the self-adhesive film.

Try hot water first. Wet the surface thoroughly, and after a few minutes begin to separate the film, using a flat, sharp object, such as a knife or spatula. Make sure that the surface on which the film is applied is not damaged.
If the option with hot water did not justify itself, a hair dryer will help you. The fact is that the film needs to warm up properly so that the glue detaches from the surface. You can also use normal household hair dryer with which you dry your hair, but it is better to take an industrial hair dryer: it is more powerful and will provide heating of a larger area.
In addition to a hair dryer, you can also use a fan heater, setting it to maximum power and directing it to the surface from which you want to remove the film. After the material softens and begins to lag behind, pry off the corner and begin to gently pull the layer towards you until it is completely separated.
Adhesive residues on the surface can be removed with thinner, alcohol or benzene, depending on the material the surface is made from.

Video about working with self-adhesive film

As you can see, self-adhesive film is practically versatile material, which will allow you to completely change your home as your fantasy suggests, at any time and at no extra cost. It is not necessary to change the environment for the sake of new experiences, it is enough to use this easy-to-use material to make your life sparkle with new colors.

If you have already dealt with self-adhesive film in the interior, please tell us about it in the comments, share your experience with other readers.

home > Road transport equipment