12663 0 7

How to make a rocking chair from plywood with your own hands - drawings and assembly instruction attached

A comfortable and beautiful rocking chair made of wood in a store is not cheap. However, it is not necessary to buy such furniture, because everything can be done with your own hands. Read in this article about how to make reliable and inexpensive furniture from plywood for a comfortable stay.

Advantages of a homemade plywood rocking chair

The use of plywood as the main material for furniture assembly guarantees the following advantages:

• Making furniture with curvilinear shapes. Plywood, unlike solid wood, can be bent in different directions, giving products complex curvilinear shapes.
• Ease of manufacture. Most plywood furniture can be made by hand using readily available tools from the home workshop.
• Affordable cost. Finished products will cost less than similar, but solid wood products.
• Great appearance . Plywood is glued from veneer with a solid pattern, and therefore the finished furniture looks no worse, and sometimes even better, than similar products completely assembled from wood.
• Strength and durability. Due to the special arrangement of the veneer in the board, plywood exhibits higher fracture strength compared to similar indicators of solid wood.
• Environmental Safety. Multilayer plywood is a product made from natural raw materials - wood, and therefore this material is safe for humans.

Types of rocking chairs

What chairs can be made from plywood? There are many options, consider only the most interesting.

How does it swing

The review shows that in terms of the device, all rocking chairs are of 3 types, namely, models with curved skids, models with a pendulum and hanging models. But regardless of the modification, the principle of swinging all rocking chairs is pendulum.

The seat in all of these models moves due to the forced displacement of the center of gravity relative to its original position. Subsequent displacements occur by inertia. As you swing, the inertia weakens and the pendulum stops until you set it in motion again.

Drawings of plywood rocking chair

Choosing a chair model for self assembly, we give preference to those drawings that will be easier to translate into reality. I offer several such drawings.

model on the drawing upholstered furniture, assembled on solid sidewalls, cut out in the form of curved runners, turning into armrests. To connect the sidewalls, you can use transverse inserts made of plywood or planed board.

The supporting frame of this chair is assembled from plywood parts. Cross bars are stuffed over the frame. The lower part of the sidewalls is reinforced with a bent strip of skids. This design will be an excellent element of the surroundings. country terrace or homestead.

Puzzle Rocker translated from English means "a rocking chair assembled from mosaic fragments." 4 fragments shown in the diagram are cut from multilayer plywood. Then these fragments are put together without the use of fasteners and the chair is ready. If necessary, the rocking chair is easy to disassemble.

Design requirements and dimensions

The dimensions of plywood furniture are selected so that the overall dimensions correspond to the thickness of the material used. That is, the larger the chair, the thicker the plate should be, from which the details will be cut. The preferred option for any chairs is plywood with a thickness of 25 mm or more.

What you need to work

Most important tool for working with plywood - this is a jigsaw that will provide sufficient cut accuracy

Necessary materials and tools:

• Multilayer plywood - thickness 30 mm.
• Fasteners self-tapping screws for wood and other hardware for furniture assembly.
• Joiner's glue.
• Paints and varnishes for decorative and protective finishing of furniture.
• Electric jigsaw.
• Screwdriver with a set of drills and bits.
• Clamps for wood.
• Sander or hand grater with replaceable sandpaper.

Chair making process

Making furniture from plywood is not much different from making chairs from other board materials. The process is step-by-step and all steps are performed in the following sequence:

• Cutting the material in accordance with the selected drawing.
• Preparation of parts - chamfering, drilling holes, forming grooves, etc.
• Furniture assembly.
• Finishing, including grinding and processing with paints and varnishes.

Let's consider the above points in more detail.

If the material is purchased for subsequent painting, simply select the sheet desired thickness, not paying attention to the texture of the fibers. If the finished furniture is supposed to be varnished at the end of the assembly, we don’t save money and get the plywood that initially looks good.

We try to purchase the material that was stored correctly - we are talking about moisture and lack of curvature of the sheet. The purchased material must be even and dry. We pay attention to the cut line, all layers must be tightly glued together without peeling.

Preparation of plywood and general rules for working with it

Plywood is a board glued together from sheets of natural wood veneer. On the one hand, the layered structure of the material simplifies the work, since plywood can be bent.

On the other hand, this feature makes sawing difficult, since an improperly selected tool and unprofessional cutting lead to the fact that the layers of veneer along the cutting line of the slab crack and crumble. That is why, when assembling plywood furniture, we follow the instructions and recommendations proposed in this article.

How to prepare material for subsequent sawing? You don't need to do anything special, just make sure the slab is dry enough and free from curvature. If there is curvature, lay the plywood on the bars so that the sheet curves in the opposite direction of the curvature.

Pattern making and drawing transfer

After we decided on the choice of the drawing, it remains to mark the plate in accordance with it. That is, you need to transfer the drawing to plywood, while increasing the scale of the image to natural size. If the design of the furniture to be assembled does not have complex shapes, the drawing from the paper is transferred along the ruler and square.

If you plan to make furniture with complex shapes, for each part, patterns (templates) are cut out of thick paper or cardboard, which are subsequently traced on a sheet of plywood.

Cutting plywood into pieces

For a curved cut, it is preferable to use a jigsaw, as the tool is available. If possible, the workpieces are cut into band saw provided that a blade with a fine tooth is used.

Construction assembly

The chair is assembled according to the drawing. The strength of the finished product largely depends on the choice of fasteners. To achieve maximum reliability, we use self-tapping screws only in unloaded connections. In areas with a high degree of load, we use fasteners consisting of bolts and nuts.

The advantage of bolting when assembling furniture is that the nuts can be tightened during operation and thus eliminate backlash and creaking.

Final balancing

How to balance skids for smooth rocking? Make sure there are no ridges or flat areas on the skids that could impede rocking. If there are such areas, round them off using a sander with sandpaper.

In addition, for smooth rocking without sticking, use the chair on a flat hard surface. If the furniture is to be used on personal plot, it is preferable to make the skids wide so that they do not imprint into the ground.

How to bend plywood for a rocking chair

How to make curved parts out of plywood without cutting out their contour from a single sheet, but by bending the strips along a given radius?

Illustrations	How to bend
	Steaming and bending. This is a classic method in which the part is soaked in boiling water and then molded and fixed in a pattern. After drying, the workpiece retains the specified radius. The method is relevant for plywood of small thickness.
	Cutting and bending. By inside of the intended bend, cuts are made on ¾ of the thickness of the sheet. After that, the workpiece bends. To fix the radius, glue is poured into the cavity of the cuts and a strip of veneer is glued over the cuts. This method is preferred for materials with a thickness greater than 25 mm.

How to make chair pads

Properly assembled furniture looks good on its own, but soft lining will make it more comfortable. The easiest option is to make pads in the shape of the seat and back on ribbon ties. You can make these patches yourself, or you can buy them ready-made.

DIY collapsible chair

Summing up

Now you know how to make a plywood rocking chair yourself. If after watching the video on choosing a design and assembling furniture, you still have questions, ask them in the comments to the article.

- a fairly popular piece of furniture found in living rooms, gardens, and terraces. They are made from different materials, have all kinds of designs and differ in designs.

Despite the huge range of materials, models from natural wood. They are elegant and noble, safe and durable.

When choosing materials of manufacture, preference should be given conifers. They are also often made from larch and alder. The advantages of these types of wood include low weight and low density. Due to this, products are easily moved from one place to another, and the low density of the tree does not create problems in the manufacturing process.

Important: coniferous products are obtained in a light gray shade. They fill the premises with a pleasant aroma and have a positive effect on the well-being of users.

The advantages of coniferous wood include:

• Ease and pliability in processing. Such chairs can be given any shape.
• light weight. This makes the products light and easy to use.
• Elasticity and viscosity. This allows you to create original models of different shapes.

Attention: conifers swell at high humidity. Therefore, furniture items must be treated with antiseptic compounds.

To the benefits larches worth considering:

• high density;
• resistance to deformation;
• resistance to temperature changes and high humidity;
• attractive appearance.

You can also make a rocking chair from oak, ash or beech. Such furniture will impress with its aesthetic qualities, durability and elite appearance.

Dimensional drawing

To make a practical and easy-to-use rocking chair, you need to consider its design, dimensions, materials of manufacture, type of construction. Next, a drawing is drawn with the designation of all dimensions. For the manufacture of a chair, it is recommended to take an ordinary chair as a basis.. Since he has simple design where all elements are at right angles.

reference: for a rocking chair, it is recommended to make a square seat measuring 50-60 cm. Its thickness can vary between 1 - 1.5 cm. For the rear legs, it is better to use a bar with a section of 4.5 by 4.5 cm. Their height should be in within 105 - 110 cm. But the height of the front legs will be 55-60 cm.

Instruments

To make furniture, you will need the following instruments:

• jigsaw;
• plane;
• grinder;
• milling cutter;
• laser level;
• screwdrivers;
• tape measure and pencil;
• clamp.

How to make a wooden rocking chair?

The manufacture of a rocking chair begins with the preparation of all parts. They are cut according to the drawing. After manufacturing all the necessary parts, we proceed to their assembly. You can connect parts in two ways:

• thorn to thorn;
• with glue.

It doesn’t matter which option for fastening parts you chose, but all work is carried out with the help of clamps and gaskets. The gasket is placed between the rocking chair and the clamp. After that, the clamp is tightened, and the product is set aside for a day until the adhesive composition is completely solidified.

As for the installation of skids, here they also apply different variants.

Easy option

Method number one is simple and consists of the following steps:

With skids made of timber

The second option is more labor intensive. A bar made of wood is used here as skids. The work looks like this:

Advice: in order for the rocking chair to have a long service life, the wood for the runners must be taken of high quality.

After making a rocking chair from wood, it must be check for balance. The comfort of using a piece of furniture will depend on this:

• if, when standing up, the product leans forward strongly, cross bars must be installed on the skids behind the back;
• if the product tilts back, then the counterweight is installed on the front of the product.

Finishing

When the product is completely ready, it must be given an aesthetic and noble appearance.

To do this, the chair will need carefully polish, cover with stain and varnish in several layers. This will not only increase the attractiveness of the product, but also extend its life.

After all, many people use a rocking chair outdoors in the warm season. And this contributes to the deterioration of wood under the influence of negative factors.

So that the tree does not succumb to various diseases, it must be treat with antifungal agents.

A photo

Selfless work will bring excellent results:

Useful video

How to make skids can be seen in the following video:

Then it's time to assemble the whole chair:

Conclusion

In conclusion, it is worth noting that making a rocking chair out of wood with your own hands is not so difficult as it might seem at first. With the observance of technology, the procurement of all the necessary materials and tools, you can make a piece of furniture of any design and design.

Such a chair will not only be comfortable and cozy for leisure activities, but will also please you with an interesting design decision and high technical specifications. And rhythmic swaying in the product will strengthen nervous system, will help you relax after a hard day at work and relieve tension from your back muscles.

In contact with

Rocking chair - a symbol of comfort, harmony and peace of mind. Unfortunately, buying this product is not a cheap idea. Prices start from 5000 rubles and above. However, it is quite possible to make it yourself. In this case, you can think over your design project and design.

How to design correctly?

The web has big choice finished drawings. However, when using them, keep in mind that they may be designed for certain people and are not intended for a wide range of people. To make the chair comfortable and meet individual needs, study the kinematics. Briefly described, the stability and convenience of the rocking chair depends on the location of the center of gravity of a person relative to the center of the generating circle. Remember e If these two points coincide, then the so-called dead equilibrium is observed at which the chair does not swing. Such a coincidence is rare, but it happens. If the center of gravity is higher than the center of the circle, then the structure will be unstable. To avoid such a scenario, the rocking chair is designed for the tallest and heaviest person in the family.

Remember that too sharp rocking can always be softened with a pillow under the back and on the seat.

Making skis

It is on the runners that the comfort and smoothness of the swing depend. Consider two ways to make them:

• The first option is simple and does not require much time.. We make skis from plywood 1.5 cm thick, no less. Using the pattern and the drawing, we cut out two blanks. We grind them . We cut grooves in the legs of the chair for the skids with a depth of 7-10 cm. We install the skis. When installing, it is necessary to achieve complete symmetry. Having achieved harmony, we make through holes in the place of their contact with the legs of the chair. We process them with glue and insert a wooden spike. The skids are ready.
• Second option. We make the runners from a square meter bar with a side of 4.5 cm. We cut out the grooves for the legs of the chair. We prepare the legs of the chair for their landing in the grooves on the skis. Soak the bars in hot water. When the tree becomes pliable, we bend the runners into the desired shape and leave to dry. We process the joints with glue and install dry skids on the legs. Skis are ready.

If there is no ready-made drawing at hand, then you can make it yourself. The construction of the profile of skids of variable curvature is done in several steps:

• Select the center point of the circle.
• We choose a fixed angle, usually it is equal to 10 degrees.
• We draw a line that exceeds the radius of the center of the circle by 2-3% and mark a point.
• Further, we increase the radius at each turn according to the law geometric progression. The indicator is taken equal to 1.02 or 1.03. We also raise the center of the circle after each rotation according to the same law.
• We connect the obtained points with the help of a pattern with a smooth line.
• The runner profile is ready. The scale is better to take 1 to 5 or more.

A rocking chair is unlikely to be perfect the first time, so the resulting product must be balanced. A poorly swaying seat requires weighting the rear overhang. This problem can be solved with a U-shaped beam connecting the ends of the skids. Loads must be placed in the beam. It also happens that the rocking chair falls back. In this case, you need to weight it in front. A footboard or weight attached to the underside of the foot will help in achieving balance. In some cases, it may be necessary to change the shape of the skids.

Most popular options

Before you take on a chair project and make it yourself, you need to study existing species. There are several product concepts depending on the needs of consumers:

• With radius skids. The first version of the rocking chair that arose in everyday life. Received its popularity due to the simplicity of design and technology. In most cases, it has a low landing, associated with unstable balance when swinging. Overturning is possible at large amplitudes. To avoid it, the runners are made with a closing horizontal arc.
• With skids of variable curvature. Their main advantage is the impossibility of capsizing. Suitable for creating rocking cradles, as they guarantee safety and comfort.
• Armchair nirvana. There are two types: spring and ellipse. Rolling is smooth in both cases. However, there is a big difference in manufacture and use. Spring models require special materials: high-quality wood or spring steel. In addition, they are unsafe and inconvenient to use. The gap between the skid and the spring is clogged with dirt and you can pinch your fingers in it. The ellipse versions do not guarantee tipping, but have a very light and pleasant rocking. You can solve the problem by installing fenders. Ellipse rocking chairs with an awning never capsize.
• Rocking chair 3 in 1. The name speaks for itself. The chair includes both a rocking chair, and an armchair, and a lounger. The main advantage is versatility. The disadvantage is the large dimensions, which are not always possible in an apartment. In addition, the transition from one mode to another can be accompanied by unpleasant shocks.
• Pendulum on bearings. An upgraded version of the classic armchair. The difference lies in the fixed base and completely silent operation. As well as rocking chairs with runners of variable curvature, they are suitable for rocking small children.

Materials for the manufacture of rocking chairs are varied and sometimes surprising:

• Metal. Perfect solution for the street due to high wear resistance, strength and resistance to adverse external conditions. However, forged rocking chairs require special equipment and skills, besides, finished products are heavy. You can consider the option of manufacturing from profile pipe, it is better if there is an ellipse in its section. To reduce the weight of the structure, and therefore reduce the moment of inertia, the seat is made of a different material.
• From plywood. Suitable for carpenters with some experience. The main advantages of plywood are that it allows you to make precise joints, is light in weight and, due to its flexibility, is suitable for the implementation non-standard ideas and solutions. plywood product it is necessary to impregnate with any protective composition, be it acrylic varnish or polymer emulsion. In this case, the product will last longer.
• from wood. traditional material for the manufacture of any furniture. Affordable, natural, eco-friendly and simple. Wood has high strength characteristics, differs in considerable service life, and also has pleasant appearance. However, in conditions of high humidity, the tree begins to rot. Solve this problem with the help of various paints and varnishes. Luckily, there are plenty of them for sale.
• From a professional pipe. Immunity to moisture, pleasant color and ease of assembly contributed to its spread. Plastic pipes do not require glue, they are easily painted in any color, but there are also disadvantages. The main disadvantage is low strength. During operation, parts of the furniture are deformed, lose their aesthetic appearance, and sometimes break.
• From polypropylene pipes. Affordable, lightweight and durable. The flight of design ideas will easily support a wide range of pipes presented in stores. The set of tools required for making furniture is minimal and includes a hacksaw, a marker and a tape measure. Suitable for lovers of unusual interiors.
• From plastic bottles. The environmental movement is gaining momentum. In this vein, it is increasingly being proposed to reuse waste. Plastic bottles- not an exception. The main thing is that there are a lot of them and they look aesthetically pleasing.

Sketches of simple options

The easiest, fastest and cheapest way to make a rocking chair is to make it from an old ordinary chair, attaching skis to it. We will need:

• armchair with legs (if they are not there, you will have to do it);
• skids;
• screwdriver;
• screws;
• drill;
• sandpaper;
• paint and brush.

Manufacturing takes place in several steps:

• Ski preparation. You can cut them yourself or order from a carpenter. The distance between the legs of the chair should be 20-30 cm less than the length of the runners. We drill holes in the place of attachment with legs. Try on - the skis should “sit down” on the legs. If everything went well, then you can start painting. We grind the surface of the runners with sandpaper and cover with paint. To achieve a deeper color, it is better to paint in several layers.
• Installation of skids. We put the runners on the legs. To fix them, we drill holes for the screws in the legs of the chair, insert them and twist them. We turn over. The rocking chair is ready!

How to weave?

The highlight of the interior can be wicker furniture. It will add to the atmosphere of comfort and harmony. Advantages of wicker furniture in comparison with the usual:

• environmental friendliness;
• ease;
• ease of operation;
• the ability to withstand heavy weight;
• the beauty.

Among the disadvantages are the following: the cost and complexity of manufacturing.

For weaving, rattan and willow are most often used. Rattan is a plant from the palm family. Furniture from it tolerates moisture well, so they prefer to install it outdoors. It is eco-friendly and looks great. However, the repair of such furniture will cost a pretty penny due to the cost of the material. Willow is a cheap option. It is less flexible and unstable to moisture, like rattan, but more accessible and therefore common. Perfect for home furnishings.

A wicker chair made of willow, wicker or rattan is not so easy to make. Before starting work, it is necessary to prepare the material. The collection of vines is carried out in the cold seasons. Raw materials collected at this time are easier to process. The harvested vine is kept for outdoors upright 70-120 hours. Raw materials are sorted according to their purpose. Thick branches with a diameter of 5 cm are selected for the frame. Rods 1 cm thick will fit for the braid.

Raw materials before weaving must be processed as follows:

• We soak the sorted rods in hot water for 10-12 hours.
• We remove the bark.
• We make taverns - we align the thin rods in length and cut them into 3-4 parts.
• We stretch each shank through the press. The result should be tapes of the same length.
• Thick branches are bent along the cylinders of the templates, fixed and allowed to dry. Templates are made according to the drawing as follows. We apply the frame drawing to the tree, attach wooden cylinders to it.
• We are waiting for complete drying. Most often it is 3 days.

Let's start assembling the frame:

1. We attach to the frame of the support. For reliability, we fasten them with cross strips.
2. We install armrests and other details.
3. We fix everything with self-tapping screws and remove the temporary mount.

The braiding of the structure occurs only on the assembled frame in the following order:

1. We knead the shank before weaving, stretching them through any cylindrical object.
2. Lubricate the places of the braid with glue.
3. Weave. For structural strength, the frame should be wrapped in three rods.
4. Inside weaving can be of different options - openwork, single.

Having finished with weaving, we install skids, supports and linings:

1. We turn the product upside down.
2. We heat the installed pad with a hairdryer.
3. We install it on the ski and wrap it with tape.
4. Remove the tape from the cooled overlays and glue them to the skid, fix with nails.
5. After the glue has completely dried, replace the nails with self-tapping screws.

Before use, the chair must be treated with liquids that protect against fungus and wood pests, and the product must also be varnished. If it is necessary to give the chair some shade, then before varnishing it, it is worth impregnating it with drying oil or paint.

from wood

A rocking chair made of wood is perhaps the easiest and easiest option after using an old chair. Roly-poly garden benches have gained particular popularity. Their peculiarity is that they collapse 90 degrees if you lean back. The seated person will be in a supine position with their feet up to the sky. If they are pulled forward, the bench will fall into its usual position. However, the manufacture of runners for such a bench is somewhat more complicated. They will not tolerate amateurism.

For smooth and comfortable rocking, it is better to use a proven drawing and accurately transfer it to the material.

Consider the manufacture of a roly-poly bench. We will need a jigsaw or a wood saw, sandpaper or a grinder, a tape measure, a building angle, a level, a screwdriver with a set of drills, a hammer, putty, a pencil and brushes with paints. The choice of materials is important for the characteristics of the finished product. We will make the side parts from plywood, and the slats from any elastic tree.

Let's get to work:

• We cut out the side elements of plywood with a jigsaw or hacksaw. We get a semicircular base with grooves for flannels.
• Racks are ready. They can also be made from plywood, if it is more than 30 mm thick and has sufficient flexibility.
• Using three bars 30x50x600 mm, we connect the side parts to each other.
• We attach the rails to the frame.
• It remains to give the product an external gloss. Lubricate the places where the rails are attached to the sidewalls with putty to hide the recesses for the screws. We are waiting for the complete drying of the putty.
• We cover the bench with varnish on wood and let it dry.
• The roly-poly bench for the garden is ready.

If desired, you can make the seat soft, for this you can use foam rubber. Another solution would be a removable soft case. It will last longer, as it can be removed in bad weather.

metal

Metal rocking chairs are harder to make. This will require special equipment and knowledge. However, they are perfect for the garden due to their high strength and wear-resistant characteristics. Needless to say, your grandchildren will also be blissful in a metal rocking chair. There are different manufacturing options, but consider the simplest. For him, we need the following set of items:

• steel bars and corners;
• galvanization;
• Bulgarian;
• welding machine;
• drill and drill bits for metal.

Let's get to work:

• We study the drawing.
• Cut out from metal profile steel strips 1 meter.
• It is necessary to weld the frame and weld the rods to it, the distance between which is 1 cm.
• We make a galvanized seat and attach it with bolts. The holes are made with a drill.
• We grind potentially dangerous places.
• We paint.

The main disadvantage of metal furniture is its weight. Therefore, it is worth thinking about how it can be reduced. If the metal rocking chair will be used at home, it is worth sticking a strip of rubber on the skids to protect the floor from scratches.

For a child

Memories of a homemade rocking chair will long time warm the soul of grown children. Making a rocking chair for a child does not have radical differences from making a regular chair. The only thing to consider is the size and proportions, as well as the presence of handles. A rocking chair for children is often made in the shape of a horse, but this is no longer furniture, but a toy. Let's consider the simplest option. Required inventory: circular and miter saws, grinder, milling cutter, jigsaw and a set of hexagons. Materials needed: 18 mm plywood, cardboard, 2 threaded studs 50-60 cm long, 4 stud nuts and paint. We start manufacturing with the sides. We cut them according to the drawing from plywood. We cut grooves. The thickness of the plywood determines the thickness of the groove. Drill holes.

Cut out the seat. The width is determined individually. In order for the edges of the seat to fit into the grooves, we tightly narrow them towards the edges. When cutting out the back, keep in mind that its width should be equal to the width of the back of the seat. We collect all the details and measure the resulting spacer size. When cutting, consider the size of the grooves. We process the edges with sandpaper and install the studs under the seat. We saw off the protruding studs with a grinder. We tighten the sidewalls by tightening the nuts on the studs. Let's start painting. It’s great if the child takes part in creating the design of a new piece of furniture.

Restoration

Favorite things are sometimes easier to update than to tear from the heart and just throw them away. Often they are reminiscent of old family ties or happy events. It also happens that old furniture has not lost its remarkable properties, but its appearance leaves much to be desired. In this and other cases, restoration will help. Let's say you have a well-worn upholstered rocking chair with wooden frame. Worn wood and worn upholstery are striking. We will restore it at home. We will need: grinder machine or sandpaper (the first is faster, the second is more interesting):

• screwdriver;
• acrylic paints;
• new upholstery fabric;
• furniture foam.

The order of work is as follows:

• First you need to disassemble the chair with a screwdriver. We clean up the screws, we still need them.
• We remove the old layer of paint with sandpaper or a typewriter. The sandpaper should be fine-grained. In case of silt pollution, remove a larger layer.
• Coating wooden parts acrylic paints, drying oil or varnish. Here you can use various ways painting. The effect of attrition is very popular now.

Seat replacement

We proceed to the constriction of the soft part of the chair:

• We remove the old upholstery and soft layer.
• We are preparing a new soft layer from a sheet of furniture foam rubber. We cut a new upholstery with allowances of 5-6 cm. From fabrics, you can choose chenille, tapestry, velveteen.

The rocking chair is a fairly popular piece of furniture in the home and garden. On such an armchair it will be pleasant to relax, sitting on the terrace. You can buy it today in almost any furniture store However, such a product is expensive, so it is better to make it yourself.

To do this, stock up on high-quality material that has moisture-repellent properties. It is important to remember that plywood in processing provides for the need to comply with certain rules. And you will also need tools for work, for example, a cutting tool that has fine teeth.

Chair materials

In the conditions of the factory, such models are made of different materials, it can be:

• rolled steel;
• solid wood;
• plywood.

The latter is suitable for independent work as well as possible. An array of wood is also used - the chair as a result is aesthetically attractive and durable. It can be entered into the interior of the apartment and the exterior of the garden. Rocking chairs have been made from plywood relatively recently. Factory options are much cheaper, but they do not look as attractive as those made from natural wood.

Is plywood worth it?

If you are wondering how to make a rocking chair, then you must decide whether to use plywood for this. The described material is a canvas of thin layers wood different breeds. At the production stage, a thin layer is removed from the log, which is repeatedly glued together using a special composition into a separate slab.

Plywood has a high margin of safety, and its texture is similar to natural wood. Before you make a rocking chair, you will need to select the material. Preferring plywood, you can save money, as well as ensure the convenience of processing the material. In addition, plywood has a fairly attractive appearance and high strength.

On sale you can find canvases of different thicknesses, which allows you to choose best option for a certain type of structure and load. Do-it-yourself plywood rocking chair is made quite often. If you also decide to follow the experience of the masters, you should also learn about the shortcomings of this material.

Disadvantages of plywood

The disadvantages of the material are expressed in low moisture resistance and weakness of the ends. If you do not process the canvas special composition, then it is better not to use them for the manufacture of garden furniture, which will spend most of the time on fresh air. Over time, such a chair will certainly deteriorate. As for the instability of the ends, they will also need to be protected, otherwise the material will delaminate over time.

Preparation of tools and materials

If you will be making a rocking chair for giving, you can be sure that the assembly work will not be difficult. However, you will first need to stock up on some materials, including:

• plywood;
• a set of fasteners;
• wood glue;
• cardboard.

A rocking chair made of plywood with your own hands cannot be made if you do not take care of having a set of tools. For cutting and assembling a piece of furniture, you should prepare:

• electric jigsaw;
• chisel;
• ruler;
• pencil;
• file;
• hammer;
• square;
• roulette.

As for the most important material - plywood - you will need three sheets. Their thickness should be equal to 20 and 15 mm - this difference is useful, because you will be making different elements, each of which is subjected to a certain load.

It is better to purchase sheets of standard sizes, which are 1520x800 mm. When a rocking chair is made, drawings must be prepared. But work cannot be started not only without them, but also without wood screws. But to connect the blanks together, carpentry glue is useful. It will be used where self-tapping screws cannot be used.

To make a set of patterns, you need to purchase cardboard. According to the patterns, you can apply the contours of the details to the surface of the plywood. A set of files must be attached to the jigsaw. It is better to prefer files with medium or small teeth, because the material being cut has several thin layers, and large teeth will simply tear the edge.

Chair making

A rocking chair for a summer residence should be carried out according to a certain pattern. It provides for the assembly of a product that consists of a frame. It will be based on two parts:

• sidewall;
• cross bars.

After manufacturing, you can supplement the design itself with a soft mattress, which will make this piece of furniture more comfortable. When making the sidewall, you should give it the shape of a boomerang. This design will fit into the room with any design. Cross bars are made from the same plywood, they are required to connect the two sidewalls. These elements for assembly will need 14 pieces.

Stops are needed to install the cross bars. They are made from a bar, the cross section of which is 20x40 mm. The bar must be sawn into separate blanks of 50 mm. The height of the chair will be 1 m, its width and length should be equal to 0.6 and 1.2 m, respectively.

Work methodology

The dimensions of the plywood rocking chair were mentioned above, but you can design the design yourself. In any case, the order of work will remain the same.

Manufacturing should begin with the preparation of a template that will determine the size and shape of the side parts. The template should be drawn on a piece of cardboard. The boomerang should have a large lower radial part - this will allow the chair to swing without jerking.

Once the contour lines have been drawn on the surface of the cardboard, you need to cut out the template using scissors. Now the master has to transfer the marks to the surface of the plywood sheet in order to make two parts from one canvas with a minimum amount of waste. Once the contour has been applied, you can start cutting out the side parts.

When a rocking chair is made of plywood with your own hands, in the next step, the ends of the parts must be processed with sandpaper. It is important not to leave burrs. Now you should cut out the transverse strips - this uses 15 mm plywood. There should be 14 of these strips, their length and width will be 600 and 40 mm, respectively. After completion of work, each plank should be sanded with sandpaper.

Now you can prepare the stops for the cross bars. They are made of timber, the cross section of which is 20x40 mm. There will be two stops for each cross bar. On each side part, markings are made for persistent bars. The line should repeat the top end. In this case, we are talking about the attachment line.

It is important to pay attention to the step between the bars - it should be the same. As soon as the line for installing the bars has been applied to one sidewall, the marks should be transferred to the other side. If it is carried out, then it will be necessary to fix the persistent bars. They are attached with wood glue. It is applied to the surface of the bar and sidewall. In order to ensure high reliability of fastening, wood screws should additionally be used.

The two sidewalls must be fastened together with transverse strips. First, the first and last are installed, after which you can move on to the rest. They are fixed to the persistent bars with glue and small self-tapping screws. Before screwing them in, holes should be made in the bar so that the material does not split. The finished frame is processed at the final stage protective agent. It is covered with stain in two layers, after which you can start applying varnish.

for a rocking chair?

Quite often, home craftsmen are wondering how to bend plywood at home. You can give the desired bend to almost all types of this material, no matter how thick they may be. Such manipulations may be necessary if the plywood is installed not across, but along the frame.

In general, flexible plywood is sold in construction stores. Usually it has a small thickness (within 4 mm). It is great for a variety of designs. The part is cut to size, and then fixed with screws to the frame. The optimal combination quality and price is considered to be Chinese-made plywood. It is quite flexible and has acceptable performance characteristics. If the work is to use a more rigid type of material to be bent, then combinations of several methods can be used, among them:

• gluing;
• stabbing;
• steaming.

Steaming plywood

If you will be making a rocking chair, the drawings of which are presented in the article, then it may be necessary to bend the material. To do this, it is better to use the steaming method. You will need a container of boiling water or an iron that has the function of uninterrupted steam supply.

The sheet can simply be wetted - the soaking time will depend on the thickness of the material and the direction of the bend. After the part has been soaked, you should fix it on the template and fix it, holding it until it dries completely. The maximum allowable bending is possible when bending across the fibers. If you have to work at home, then it is better to combine moisturizing and steaming. Only the place that should be curved should be steamed, only moisten upper layer veneer.

DIY collapsible chair

If you will be making a collapsible rocking chair made of plywood, then you will have to act according to a different technology. For this, the frame is made of solid wood, as it will withstand higher loads. The inner part, which will look like a chair without legs, can be made of plywood.

The two parts of the chair will be connected to each other using special hooks that can be purchased at the hardware store. In this case, the piece of furniture will occupy less space after disassembly. A pattern for a rocking chair made of plywood in this case is also depicted on cardboard. The side parts will look like two racks of different sizes with a cross member that connects these two elements. The lower part is also made in the form of a boomerang.

Life and surrounding events fly at a rapid speed. Often we do not have time to look back, as the week has already ended, the weekend has flown by, and it is time to start the race again. How often do we dream of cozy place where you can retire and dream about the eternal? Or maybe you just need to sleep and read your favorite book, covered with a warm blanket, while feeling the sway like on a swing or a hammock?

The rocking chair is an original and beautiful part home interior.

An ideal option for this is a rocking chair. It will be a great addition in the garden or on the porch of the house, where you can bask in the warm rays of the sun and listen to the birds singing. Also, the chair can fit perfectly into the urban interior of the apartment - you can relax on it after working days and do what you love: knitting, reading, watching movies.

If a child has appeared in your house, any mother will dream of a place where she can easily rock the baby and relax on her own. Such rocking chairs in stores are not cheap, moreover, it is not always possible to find furniture that is ideally suited to the interior of the room.

A rocking chair is the perfect way to create an atmosphere of comfort and tranquility.

An excellent option would be to make such a chair with your own hands. The advantages in this case are undeniable: you can choose the right size, design, material and feel a great sense of pride for being able to create such beauty with your own hands.

An absolute plus of a home-made rocking chair is its compliance with your tastes.

If you decide to make a rocking chair with your own hands, you must first consider the types and designs of products, familiarize yourself with various materials, of which such a process as making a chair will bring pleasure, and the features of working with these materials.

A simple wicker rocking chair will add a lot of comfort to your home.

Consider the main types of products:

• Classic rocking chairs on regular skids- harmonize both in the modern style and in the classics. Manufacturing technology does not require huge experience in furniture production, but the basics of practice should be present. The runners sway smoothly with a small radius, with a strong buildup there is a risk of tipping over.
  

These chairs are made with a low seat for a more stable position.

• Rocking chairs on skids with chippers. If a classic chair needs to be made with an average (normal) seating height, it is recommended to equip the arches with chippers - the runners are designed so that the ends are curved in the opposite direction.

In this version, the arches prevent from rolling over, but getting up from the chair is uncomfortable and hard due to the presence of these bumpers.

• Rocking chairs with elliptical arcs - chairs guarantee soft gentle rocking, but with a large buildup there is a risk of tipping over, because of this it is recommended to equip them with bumpers, as in the previous version. For garden plots, a variant of elliptical rocking chairs with an awning is offered, with which tipping is excluded.

The rocking chair can be small and neat.

• Multifunctional rocking chairs 3 in 1 - when landing, it looks like a standard chair for a flat seat, while leaning back, the skids go into rocking chair mode, when you recline further, the chair turns into a sunbed.

However, visually, such a chair looks bulky and the process of transition from one function to another is inconvenient, sharp jerks of the body are necessary.

Having considered the main options for chairs, in the absence of furniture production experience, we recommend that you take a closer look at the classic version, making a rocking chair is not as difficult as it might seem.

Having decided on the model, it is important to make a decision on the materials.

Materials for rocking chairs

There are many materials from which a chair can be made. There are popular models most commonly used in the manufacture of rocking chairs.

Consider everything possible options and dwell on the most popular in more detail.

1. Willow vine is an easy-to-manufacture material that looks beautiful on finished product, the main disadvantage is moisture intolerance, i.e. Outdoor installation is not recommended.
2. Rattan - a vine originally from South-East Asia, in beauty they are not inferior to willow materials, but not durable. When working with rattan, glue and special knitting are used - nails and screws cannot be used.
3. Forged metal is a durable and strong material, Forged Products decorated with a variety of metal patterns. Exclusively outdoor version of the rocking chair.
4. Soft (leather) details - there are plywood rocking chairs covered with other material, for example, leather - they can be attributed to strict office options;

Some chairs can be easily transformed.

So, the most popular materials are rattan and willow. Let's try to understand their properties.

Rattan is a vine from the palm family, growing in a humid region, its structure is porous and moisture resistant. Rattan is not afraid of rain and furniture from it is often installed in garden plots and in yards. Furniture made from this material is eco-friendly, beautiful and comfortable. However, due to porosity, the material can quickly fail, and the repair of such furniture will cost half the cost of the product.

Its wood is very flexible and works well.

Willow is a tree known to all of us, the structure is homogeneous, respectively, such material is less flexible in comparison with rattan. It is also not recommended to leave the willow chair in the rain, as the structure of the wood can swell and deteriorate. In rattan, the porous structure does not allow using anything other than glue, so you have to fix the whips with special knots. It is also worth noting that willow material will come out much cheaper than rattan.

When making furniture from willow, craftsmen use self-tapping screws and special glue.

Now, knowing the main indicators of different types of wood, you can decide for yourself which of the materials is closer to you and is right for you.

A variety of materials allows you to create a large number of excellent specimens.

Making a rocking chair with your own hands, especially if this is your first such work, is easiest from plywood. As a first experiment, we recommend using maple plywood, as it is a very hard material with a high density and a beautiful texture - pattern.

With this type of material, the manufacture of the chair will bring you a pleasure.

Consider the features of working with plywood. For structural strength, three layers of plywood are used, and the middle one should be twice as thick as the outer ones, for example, if we need a total thickness of 20 mm, then we glue 5-10-5 mm, we need to glue it with special waterproof glue and can be additionally strengthened with small nails.

When connecting parts, you can use self-tapping screws in addition to glue.

Also, the structure of plywood allows you to develop unusual shapes. Enough to draw desired workpiece and cut it out with a jigsaw. Also, when working with plywood, it is important to take into account that it must be impregnated with a water-polymer emulsion and varnish at least twice.

Such a product will be much stronger and more resistant to external influences.

Below we offer step by step instructions. how to make a rocking chair with your own hands . Consider 2 options for chairs, for both we will use plywood as the main material. Before starting production, it is important to decide on necessary equipment so that your work does not stop in the middle of the cycle due to the lack of any materials or tools. So, you will need:

• Templates for frame parts;
• Plywood boards and bars;
• Jigsaw;
• Reed threads;
• Grinder machine;
• Screws, small nails, self-tapping screws;
• Sandpaper;
• Drill - for drilling side holes;
• Water-repellent impregnations, varnishes.

Tools for creating a rocking chair with your own hands.

The process of making a rocking chair

Rocking chair made by hand in classical style with curved skids, will be an excellent option for the first experience in furniture making. Woven cane elements will also be used, which will create beautiful patterns and comfort when planting.

A rocking chair can easily be made at home.

So, we need 3-ply maple plywood, on which we will impose pre-created templates, and make the frame of the product. You can create a drawing of a rocking chair yourself or search on the Internet ready-made options forms.

We cut out all the elements with a jigsaw and a grinder.

It is very important to carefully treat the surface of all wooden elements, they should turn out to be smooth, without burrs and rough areas, therefore, in order for the templates to take the desired form, they must also be cleaned with sandpaper.

We connect the parts with screws.

Do not forget that the back and seat of our chair will be decorated with cane patterns, so we leave their central part empty. That is, we create only a frame from plywood. Along the entire perimeter of the resulting frame, we make small identical holes at a distance of 1.5-2 cm from each other.

In the holes in the future we will fix the reed threads.

After our base is ready, we start working with the reed. We weave it with threads vertically and horizontally over the entire surface of the seat according to the type of weaving and fasten it with strong knots in the holes drilled earlier.

We perform similar actions with the back of the product.

When the product is formed, all wooden elements need to be processed protective coating at least 2 times.

After drying, fix with a double layer of varnish.

Consider another simple version of the original plywood rocking chair. The chair consists of two sidewalls in the form of a boomerang and transverse guides from wall to wall in the amount of 14 pieces.

The chair is made of plywood 15 mm thick.

To begin with, according to the template, we will draw 2 sidewalls of the chair and carefully cut them out according to the markings with an electric jigsaw. All edges of the sidewall must be sanded with sandpaper.

You should get 2 large "boomerangs".

We glue the supports to the walls of the sidewalls with carpentry glue and, for reliability, we fix each of the bars with a self-tapping screw.

We also attach our guides to these supports with self-tapping screws.

After completing all the above steps, we will have the frame of our rocking chair ready. We process the sides of the chair with stain in two layers, you can proceed to the second layer only after the first has completely dried.

The ends of the sidewalls can then be varnished or painted with glossy paint.

Our chair is ready.

It remains to decorate it. For this we take soft pillows of the required color or a small flexible mattress and fasten it to the frame with the help of ties. Soft elements can be either purchased at the store or made independently. To do this, it is better to take natural fabric as upholstery and foam rubber 5 cm thick.

We cut out the part we need in size from the foam rubber and put a pre-sewn cover on it.

We are sure that making one rocking chair with your own hands will push you to conquer new heights, and you will want to make a similar or another rocking chair with your own hands for all family members so that you can get together on quiet cozy evenings and talk about past events and plans. for the future, slowly swaying on their own made chairs.

The rocking chair will help you quickly and fully relax.

You can make this kind of furniture individual sizes, including children's sizes for the youngest members of the family. Such evening or morning motion sickness creates a relaxing calming effect, which is so necessary for a person in modern world. Such chairs are environmentally friendly, as they are made of natural materials.

They are beautiful and will be able to decorate your interior in the apartment, on the balcony or in the courtyard of the house.

Most rocking chairs do not require special care they easily tolerate cold temperature. Some materials do not tolerate strong moisture, so you cannot leave such furniture outside for the winter.

We are sure that every owner of a rocking chair will consider it his favorite place to spend time.

Making a rocking chair with your own hands is not at all difficult, it’s enough minimum set tools and a great desire.

VIDEO: DIY rocking chair - 44 ideas.

Rocking chair in the interior - 50 photo ideas: