How to make a model car from bottles. How to make a car out of a plastic bottle

Many homeowners create all kinds of products from plastic bottles to decorate your place. You can create real works of art by spending a minimum of money.

Not only decor items are made of plastic, but even furniture. All you need is a knife, an awl and a little imagination.

In this article, we will analyze in detail how to make crafts from plastic bottles with your own hands.

We decorate the site

What only homemade products you won't see on household plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give a great mood.

Let's take a look at a couple of instructions for beginners that make it easy to create crafts from plastic bottles. It will be a palm tree and a pig.

bottle palm tree

To make a palm tree, you need to create a frame. Its length should be equal to the height of the tree.

Bottles of the same size are taken, the bottom is cut off from them and placed on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.

Funny pig from bottles

The piglet will look great anywhere in the garden. For its manufacture you will need:

5 l bottle;
four bottle necks for making legs;
one top part from a bottle that is cut in two to make ears;
tail wire;
two beads for the eyes;
glue;
pink paint.

The parts are connected and fixed with glue. Ready product need to be painted. You can use oil or spray paint. To prevent the pig from being blown away by the wind, you need to pour sand into it.

In addition to the decorative function, the design can serve as a flower bed. To do this, the top is cut off, filled with earth and flowers are planted.

Crafts from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with a neck.

Both whole and cut plastic are used. It is important to fill the bottles with earth so that they do not deform when they are walked on.

The use of bottles in the household

Bottles are used for more than just decoration. From them you can make a scoop, a washbasin or a trap for a pest.

Undoubtedly, everyone will need a container for storing any items. To make it, just cut off the neck.

The washbasin is also very easy to do with your own hands. The bottom of the bottle is cut off, and holes are made through which the rope is threaded. The structure is hung in Right place and pour water. To wash, just unscrew the cork a little.

To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.

It will take hot water in which sugar and yeast dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.
Note!

Even a child can make a scoop. First you need to outline its shape, and then cut it out.

Can be made from plastic flower pots, greenhouses or containers for seedlings. A description of such crafts from plastic bottles can be found on the Internet at in large numbers, but to create something unique, you need to show your imagination.

It is fashionable to build an automatic watering tool from plastic containers. To do this, cut the bottle, make holes on the sides and put the hose into the neck. With the help of such a device, the plants will be perfectly moistened.

For plants that do not like surface watering, the following device is made. The bottom of the plastic container is not completely cut off. A trench is torn to the side of the plant, where stones are laid. The bottle is instilled upside down.

Then poured right amount water for irrigation. You can place bottles upside down, but in this case you will need to make holes in the container.

use plastic container and for plant heating. To do this, the bottles are filled warm water and put them around the plant.

Note!

For inspiration, see various photos crafts from plastic bottles. It doesn't take much effort to make original decoration or a useful little thing for your garden that will last for many years.

Photo of crafts from plastic bottles

Note!

Today we will be with you make a typewriter(see also ) from ordinary plastic bottle. At the same time, she will ride with the help of a jet engine, for which we will install an ordinary balloon(read).

Machine design it will not take us much time, so lovers of quick results, this craft is just for you.

Materials for creating a car

Materials for creating a car from a plastic bottle

In order to make a typewriter we need a 1 liter plastic bottle, four large buttons (wheels), it will be nice if you have four wheels with axles from an old car, right size. You will also need: balloon, 15 cm plastic tube, thread, sharp knife, scissors.

We design a car from a bottle

First, we cut four holes for the wheels in a plastic bottle, the holes must be cut so that the axles of the wheels are parallel. Then we insert the wheels, as shown in the figure, and check if they rotate easily. After that, we cut two holes on top of the bottle and in its bottom, for a plastic tube. Having inserted it into these holes, we put it on the upper edge and tightly tie the balloon.

As plastic bottle machine ready, it remains to check its driving performance. To do this, we inflate a balloon and, putting the machine on the floor, release it. The jet stream of air will begin to push the machine, and it will pick up quite a decent speed for an apartment.
If you wish, you can make a certain tuning of the car: paint it, make a spoiler, etc. It all depends on your creativity.

And now we offer to see how a plastic bottle car drives.

One of the options for decorating a gift for a child ...

Like a long time ago did little boy a typewriter from a printer cartridge (!) And it turned out to be very durable, given the loads that the typewriter has in the sandbox. Well, to make something similar to a car out of a plastic bottle is simply necessary for every self-respecting do-it-yourselfer, especially since all the main parts of the car are present in the set of PET plastic bottles. The shape and size of containers made of PET plastic have many variations, which means that cars made from plastic bottles can be very diverse. And if you consider that in the vast majority of cases a plastic bottle is actually a container for food products, which can be filled with sweets, then such a machine will become a gift for a holiday or a family celebration.

Idea

The main thing in any car is the wheel, and the wheel must be available,. If there is a reliable wheel, then a durable toy car will be made. It would be natural to use a cap from a plastic bottle as a wheel, but the cap still needs to be somehow fixed on the axle so that there are no radial and end beatings during the rotation of the wheel.

This trouble can be avoided by using several specially selected plastic bottle caps (). The best results are obtained by using a regular shortened cap (outer diameter 30mm) and caps from milk plastic bottles (45mm). Both caps () have a height of about 10mm. The cap of a plastic bottle can withstand pressure of several tens of atmospheres from the inside of the bottle, it can not only protrude, but also.

Home distinctive feature The larger cap for the production of the wheel (green) has an annular inner collar (). Inner diameter of the annular collar is exactly equal to the outer diameter of the smaller cap (blue). If you combine the caps with threaded parts towards each other and drill holes in each along the axis, you will get a reliable wheel for a future plastic car that can withstand radial and end runouts on the wheel axles of a future toy car made of plastic bottles.

Materials and tools

Work

The work on making a car - a gift from PET bottles should begin with the most important thing - the wheels, and the most important thing in our business is to make the wheels the same and symmetrical on each axis of the wheelbase.

During production, wheels should be carefully drilled exactly in the center all plastic caps (as in this case ()) selected to receive the wheels of the machine - a gift, holes for installing the future wheel on the axle (). Drilling is better outside caps as, because the influx of plastic formed during such drilling will be hidden inside the resulting wheel, and the lock washers will fit snugly against the caps and minimize loosening of the wheel on the axle in different directions over time ().

When all the wheels are ready, we move on to building the wheelbase and installing the axles that carry the wheels. The “squareness” of the plastic bottle is just what is needed for the convenience of installing the wheel axes () in the same plane and minimizing the distance from the wheel to the surface of the plastic bottle as the body of the machine. The axis is traditionally installed through two side holes melted in the body with a burner, as in the case of such a product (). I do not advise drilling a plastic bottle mechanically, the hole is torn and quickly loosened.

Each wheel of two plastic caps is framed on both sides along the axis with metal washers (), and the end of the axle rod is melted on both sides like the head of a plastic rivet, which blocks the wheels from falling out. In principle, the main parts of the gift machine are already ready (), it remains only to strengthen the imitation and decorative elements, which primarily includes the cabin ().

The cabin is made from the bottom of the same plastic bottle as the body of the machine and is attached to the body closer to the wheels with 4 plastic rivets (), which are installed from the inside with such a device ().

Before installing the cab on its top, it is reasonable to install a “spare wheel” in the form of two plastic caps - the components of the wheel fixed on top with a through plastic rivet. Similarly, to push gifts inside the case, you can decorate with a lid of a different color () and a smaller size. Such decorations make the car look somewhat reminiscent of a Formula 1 car.

Hello dear friends, in this article I will show you how to make a car from a plastic bottle with your own hands. This machine does not need a lot of material and it is easy to manufacture. You can make such a homemade product in a couple of minutes of your free time. If you want to make this homemade product, then your children will be very happy with such a machine.

Necessary materials:
- plastic bottle 0.5l
- barbecue skewer
- covers
- glue gun
- motor
- switch
- battery

Step 1: First of all, we take a plastic bottle of 0.5 liters. It is better to take a square-shaped bottle. Using a marker on the bottle, draw the frame of the machine. Then we cut it out. Please note that in the back you need to make a stand for the motor.