Dwarf junipers for alpine hills. Which conifers for an alpine slide to choose - photos and descriptions of the best species

Rock gardens cannot be imagined without coniferous plants, but some gardeners go further and create compositions consisting entirely of conifers. The desire to use them is understandable - coniferous for Alpine slide just perfect, they are decorative, unpretentious, retain an attractive appearance all year round and allow you to create a spectacular corner in the garden, even if there is not too much time to care for the plantings. The main thing is to observe the naturalness and imitation of the natural mountain landscape.

Features of the construction of an alpine hill from coniferous plants

The advantages of an alpine hill from conifers include the fact that you do not need to select plants according to the timing of flowering and you can almost immediately make the hill the way you intended. Minus - coniferous seedlings are not cheap. A compromise option is to plant young plants, hoping that they will grow, but for now, decorate voids with stones or ceramic elements.

When planting conifers, you need to remember that they need space

Choosing a place, taking into account the conditions necessary for conifers

In all the photos of the alpine hill of conifers, it can be seen that it looks spectacular if you choose a place that is viewed from different sides, preferably sunny. Some types of spruces, pines and arborvitae tolerate shading well, but junipers will suffer from a lack of light. Plants with colored needles must be in the sun. When creating an alpine hill from conifers in the country, it should be borne in mind that most of these plants:

photophilous;
need space for normal development;
usually grow well on sandy-clay or even stony soils;
unpretentious, but do not like high level ground water.

Unpretentious thuja will decorate any rock garden

Creating drainage and forming a slide

Because coniferous trees for an alpine slide they do not like excess moisture be sure to do drainage. To do this, remove upper layer soil and cover the hill with crushed stone, pebbles, small construction waste. The height of the drainage is from 10 to 20 cm. The soil layer is poured on top and the laying of stones begins. The stones are laid parallel throughout the hill. First, choose a place for larger ones, then put small ones.

So that the hill does not warp, there should not be cases when the stone lies on the lower cobblestone with one end, and presses on the soil with the other. Coniferous trees and shrubs have developed large roots, so pits are made between stones for their planting. The voids are filled with soil. After the construction of the hill, you need to let the soil settle, so it is better to start planting after a while. Ideal option: in the fall - to build, and in the spring - to plant.

Combine different types hvoynikov - real art

What types of conifers are suitable for rock garden

For coniferous rock garden fit trees and shrubs small size or dwarf species. Creeping varieties must be present. The combination of different crown shapes and needle colors creates interesting solutions. There is a green, bluish and yellowish shade of needles. Some are bright yellow in color.

Miniature cypress is ideal for landscape compositions

Names and photos of the most suitable species

For the middle strip of conifers for an alpine slide, you should choose:

thuja - plants with a dense crown, which tolerates a haircut well. Most of the varieties common in Russia come from the western thuja: Danica with light spherical crown, Filiformis resembling a cone, Golden Globe with yellow needles. Thuja propagates by cuttings, but it is better for inexperienced gardeners to buy a ready-made seedling;
cypress trees - fashion idea for rock garden from Europe (hedges from this plant are popular in Britain). Not all varieties are hardy. The easiest way to grow Lawson's cypress and pea. It is better to overwinter low plants that can hide under the snow. Cypress trees love to spray, but the water should not be icy;
spruces - many undersized varieties have been bred: dwarf - up to 1.5 m, mini-varieties - up to 1 m, micro-specimens - up to 30 cm. For example, the Albert Globe variety with a crown resembling a ball squeezed from above grows by 50 cm in 10 years. Very beautiful spruce Nidiformis with silvery needles. Attractive varieties of Canadian spruce with small gray needles and a pyramidal crown;
pines of all kinds are valued by gardeners. Dwarf and slow-growing varieties have been developed. Fluffy bushes of Scots pine Watereri or mountain pine Cobold with emerald needles fit perfectly into the landscape of rock gardens. The slow-growing dwarf Globosa Viridis reaches a height of only one meter and is suitable for small garden;
junipers of all kinds. Pyramidal plants are planted both singly and in small groups, creeping ones are arranged so that they have room to grow. They cover the ground and contrast with more high grades. In winter, many junipers need shelter with spruce branches.

Juniper Dahurian

Coniferous plants for the alpine slide, the photos and names of which were given above, are suitable if you take specially bred dwarf varieties. To prevent them from growing, you need to pinch new sprouts and pruning in a timely manner. Fertilizers should not be abused. It is also undesirable to allow animals to "mark" the trunks of "babies". If this happens, rinse the affected area with water.

Alpine hill has many styles and options for decoration. The best place location - slight slope. It can be laid out with stones, and between them plant undersized plants characteristic of the mountains. As a basis for a rock garden, a slope running along the terrace or near the edge of the site can serve.

When a rocky garden is created, irregularities and elevations are always formed. In addition to placing large stones, crushed stone is added to the soil.

In order for the alpine hill to bloom profusely and be well visible, you need to place it outdoors with plenty of sunshine. Some mountain plants are able to live in a poorly lit space, such as near a house or a fence, but they should also be illuminated by the sun for at least a few hours a day.

If you plan to place a rock garden in the shade of trees, then the choice of plants will be very limited, since after rain the water under the crown will dry out very slowly. In this case, you need to install massive stone blocks and plant ferns, such as ostrich and kostenets.

Drainage formation

The top layer of soil must be removed, usually it takes about half a meter.
Laying a layer of gravel or broken brick provide a quick runoff of water from the roots of plants.
TO garden soil crushed stone or gravel is added, mixing with it in a ratio of 3: 1. If the soil is clayey, and also heavy, you need to additionally mix coarse sand.
Aesthetic stones should be laid on the surface in free placement, as the composition should look natural. The stones are laid a third underground with the flat side.
When choosing stones, several types should not be mixed, for example, solid boulders along with granite fragments. Depending on the color of the stone, plants can be selected. If they create a dark background, plantings that have green foliage with a silver sheen work well. A light background allows the use of dark, saturated leaf colors or their burgundy hue. If you can pick harmonious combination more small stones with massive, the site will resemble a highland landscape.
Plants sit in the gaps between the stones. If those varieties are selected that deteriorate from waterlogging, a layer of gravel is poured on the bottom of the dug hole before planting for drainage.

Rock garden from conifers

Spruce best suited for rock garden. Caring for her is not difficult, and the choice between species is great. For alpine slides created in middle lane, spruce, Serbian, Canadian, prickly are considered the most suitable. They are quite hardy, show resistance to frost. Need to land on open places, in the shade it is not desirable to have. With drought or excessive soil moisture, these plantations usually do not get sick.

It should be taken into account that Canadian spruce should not be in bright sun, as it may burn a little.

Pine- quite a popular tree. Usually used for rock gardens Scotch pine. You can not spend a lot of time caring for this plant. Depending on the overall design, low pine, mountain pine or wanderer cedar are used. Mountain pine is usually big plant, however, some varieties are strikingly compact. The cedar wanderer does without cultivars, however, it is excellent according to the criteria for a rock garden.

Plants should be planted in March at a depth of 70 cm to 1 meter. During planting, the root should not bend. Sod must be mixed with river sand. by the most harmful factors that can disrupt the vital functions of pine are excessive moisture or a strong, long drought.

cypress trees quite rarely used as plants for rock gardens. Most plant species cannot be planted in mid-latitudes, so choose suitable option quite difficult. Scientists are trying to frost-resistant varieties Lawson's cypress, however, attempts to grow it in cold regions do not lead to success. Pea cypress can be adapted, but provision will be required additional conditions. It should be in the shade, and in the spring to hide from the bright sun. Cypress blunt must be additionally wrapped in winter.

Reduced soil and air humidity is detrimental to these plants, therefore, before planting, it is necessary to provide an opportunity permanent care after them.

Larch differs from other conifers in its unusual appearance. Quite unpretentious in care, can tolerate pollution, but for full growth it must be located on nutrient soil. Do not allow it to dry out or expose the plant over watering. Japanese, European, Latin American larch look great on the alpine hills. They always shed their needles before the onset of the cold season. Among the varieties, you can choose between options with winding branches or weeping.

Fir, hemlock, thuja are considered elite plants. Classic fir will seem too bulky for a rock garden. One color, balsamic or subalpine is suitable for him.

Moisture should always be enough, you need to check the soil before watering for its excess. Among the thuja, the western thuja will be the most suitable. It must be planted openly and the soil regularly watered. To decorate the rock garden is suitable canadian hemlock, it can be planted even in the shade. These plants do not require special measures to care for them.

Juniper It has big variety varieties and species. Almost all of them can be used in cold climates. Varieties with blue needles can burn out on spring sun, therefore, care should be taken to build a temporary fence for them. Only Cossack juniper does not need additional protection. Columnar plants for the winter need to be linked, as there is a risk of their deformation under the influence of a mass of snow. The most favorable wintering was noted in creeping varieties.

You need to plant juniper in the rock garden by choosing between early autumn and in early spring. Between seasons, you can put the plant in a plastic container. The distance between the juniper and other plants should be from one and a half meters. The pit breaks out with a depth of about 0.7 m. If necessary, it is filled up with earth. The main thing is that the tree does not drown in it. It is imperative to take care of the plant.

The plant is watered 3 times a season, the crown is sprayed regularly, once a week, it is necessary to periodically mulch the soil with peat.

This video talks about conifers for an alpine slide.

With pond and waterfall

To build an alpine slide, complicated by the design of a reservoir or waterfall, you need to familiarize yourself with the stages of their design and arrangement. To make them yourself, you need to understand general scheme and order of work.

The construction is divided into stages:

The place under the reservoir is pre-marked using driven pegs and a rope. Next, a pit of the required depth is dug.
A shape should be established in the pit garden pond, then checked general level. The resulting container is slowly filled with water. The surrounding space must be covered with sand, while pouring it with water. It is necessary to seal it along with filling all the voids formed. For convenient watering, you can connect a hose.
A hill is poured from the sand, the stones are laid with a slight slope back, however, parallelism should be visually indicated. To make the embankment natural, all lines should diverge smoothly. If the site has a slope, then the embankment does not need to be made, and it is better to place the reservoir at the end of the slope. If the place is chosen absolutely flat, then the hill is strengthened retaining wall built of brick or stone. At the same stage of construction, a cascade is made, it is needed for a waterfall. For this you can buy finished structure, however, the location of flat stones at a given height is possible.
There must be a pump in the reservoir, which must be placed completely under water. The hose runs through the ground, so it needs to be buried a little, it is well camouflaged by plants and stones.
A layer should be built on the alpine hill fertile soil. It is made from compost, sand, crushed stone and sawdust mixed with soil.
Plants can be planted both on the shore, alpine hill, and inside the reservoir.

Alpine slides in the garden in the country and on the site of your house: photos of different designs, diagrams

Before planning a design own rock garden, you need to familiarize yourself with successful options its formation. You need to compare your site, the possibilities with the sample you like. Emphasizing interesting solutions from the schemes and their implementations, you can safely use them in the design of your own alpine slide, decorating with your own developments.

Photo gallery: alpine slides in landscape design with a waterfall, a pond, with conifers and other photo examples.

And this video tells about alpine slides from cereals.

When choosing it is necessary to take into account their need for care, fertilizers, watering, as well as compliance with requests for weather conditions a certain area.

The selection of ornamental and coniferous plants, the arrangement of a reservoir and a waterfall are additional difficulties that must be taken into account when planning work.

In alpine landscapes, plants of bizarre shapes and shapes are often found. Special place among them are occupied by coniferous plants. For an impromptu mountain landscape, any dwarf conifers are suitable - miniature pines, firs and spruces, as well as creeping, pillow-shaped arborvitae and junipers.

Emphasis on form

On an alpine hill, it is not necessary to plant coniferous plants too close to each other, otherwise the individuality of their forms is lost. There are two ways to arrange plants in groups:

1) by contrast of shape or color;

2) by transitional forms, which, as it were, continue each other, creating dynamics of growth or decrease in composition.

Agricultural technology for growing conifers on an alpine hill

It is necessary to prepare a substrate for planting coniferous plants on an alpine hill according to their biological features. In addition, the time of planting in open ground various coniferous species may also differ. Not all representatives of conifers prefer sunny places and put up with excessive soil moisture. Many of them prefer shelter for the winter, which is also important to consider when planning an alpine slide.

JUNIPER

Juniper is planted on an alpine hill in early spring or September. Contrary to the recommendations of using container plants for planting in the ground at any time of the year, during the off-season, it is better to place juniper in a container on an alpine hill. So root system will remain undamaged, and in the fall the plant can be transplanted to a permanent place. The distance between junipers and neighboring plants, depending on the form of growth, is from 0.5 to 1 m. The depth of planting depends on the clod of earth and the root system; for junipers, they usually prepare a planting hole 0.7 m deep and pour the earth to the desired volume.

soil mixture for juniper - sod land, peat and river sand (2:1:1).

Fertilizer for juniper is applied in the spring - nitroammofoska - 30 - 40 g / m2.

Locations on the hill are open sunny places, green coniferous species are planted on any exposure of the hill, golden and variegated species prefer the western and southern ones, gray ones prefer the northern and eastern ones.

Juniper care includes 2 - 3 times watering per season, and spraying in evening time once a week, mulching the soil with peat.

Juniper in rock garden

FIR

Dwarf firs are planted in a permanent place in an alpine hill in April before the shoots begin to grow or in September after the formation of apical buds. The recommended distance to a neighboring plant is 0.5 m. The depth of the planting hole should be such that the root is straight in the hole, and root collar- at ground level.

falls asleep landing pit soil mixture - leafy earth, peat and sand (3: 1: 1).

If the plant is planted in the spring, then top dressing with complex fertilizer is necessary.

Locations on the hill - penumbra, northern or eastern exposure.

Fir care includes regular watering, providing air humidity, and mulching the soil with peat. In winter, it requires shelter not so much from frost damage as from burns from the winter sun.

Korean fir "Cis"

SPRUCE

Soil mixture for spruce - leafy soil, acid peat and river sand (3:2:1).

When planting, complex fertilizer is applied.

Locations on the hill - sun, partial shade, any exposure.

Spruce care includes watering once a week, 10-12 liters per plant, soil mulching with peat. In winter, it requires shelter from sunburn.

Gray spruce "Nana"

PINE

They are planted in a permanent place in March, the planting depth is 0.8 m. The root neck remains at ground level. In no case should the root be bent during planting.

Soil mixture for pine - sod land and river sand (2: 1). If necessary, add 250 g of lime to the pit.

Locations on the hill - the sun, any exposure.

Pine care includes watering 2 - 3 times per season in the amount of 15 liters per tree. You can slow down the growth of shoots and increase the density of the crown by pinching the buds.

Assortment of conifers for alpine hills

The height of coniferous plants for an alpine hill should not exceed 0.5 - 0.7 m for small stony areas (5 - 6 m2), 1.5 m for large ones (more than 40 m2). Therefore, when selecting coniferous assortment for alpine slides, the estimated height of an adult plant must be taken into account. Below is a list decorative forms that do not exceed 1.5 m.

Dwarf forms of thuja western

"Danica" - crown shape - spherical; height of an adult plant - 0.8 m; diameter - 0.8 m; the color of the needles is dark green.

"Little Dorrit" - crown shape - spherical; height of an adult plant - 0.8 m; diameter - 0.6 m; the color of the needles is dark green. Winter-hardy variety.

"Hoseri" - crown shape - spherical; height of an adult plant - 0.5 m; diameter - 0.6 m; the color of the needles is dark green. Winter-hardy variety.

Dwarf forms of mountain pine

"Mughus" - crown shape - shrubby, spreading, sometimes creeping; height of an adult plant - 1.5 m; diameter - 0.6 m; the color of the needles is dark green.

"Gnom" - crown shape - shrubby, dense, spherical; height of an adult plant - 1.5 m; diameter - 1.5 m; the color of the needles is dark green.

"Mors" - crown shape - shrubby, spherical; height of an adult plant - 0.5 m; diameter - 0.5 m; the color of the needles is greenish-blue.

"Winter gold" - crown shape - shrubby, spherical; height of an adult plant - 0.5 m; diameter - 1.0 m; color of needles - in summer - bright green, in winter - golden yellow. Winter-hardy variety.

Dwarf forms of Norway spruce

"Little Gem" - crown shape - spherical-flattened; height of an adult plant - 0.5 m; diameter - 0.5 - 0.7 m; color of needles - light green.

"Nidiformis" - crown shape - nest-like, with a deepened middle; height of an adult plant - 0.5 - 1.0 m; diameter - 0.8 - 2.0 m; the color of the needles is dark green.

"Will" s Zwerg "- crown shape - narrow-conical, dense; height of an adult plant - 1.0 - 1.2 m; diameter - 0.4 m; needle color - young - pale green, old - dark green.

"Echiniformis" - crown shape - cushion-shaped, compact; height - 0.2 - 0.6 m; diameter - 0.4 - 0.8 m; the color of the needles is green.

is a unique composition that repeats the mountain landscape in our gardens and parks. Remember the mountains of the Alps, which beckon with their beauty. A small part of them can be created in any area. You need to study what plants grow in nature in the mountain landscape and plant them in your garden.

It is impossible to imagine an alpine hill without coniferous plants, as well as stones. They are the basis of the composition. You can scatter stones randomly or create several tiers. On each of them certain plants are planted.

It would be appropriate to look at the alpine slide in the country, in a private garden or in a public park.

Alpine slide photo

Do-it-yourself Alpine slide

If you want to decorate your garden with an alpine slide, then you can use the services of a landscape designer or create a rock garden with your own hands. Be prepared for some difficulties, because creating a beautiful mountain landscape can take you a lot of time and effort, but you will save money and be delighted with the resulting beauty.

Alpine slide: how to do it?To begin with, choose a prominent place on your territory, the alpine slide should attract attention, but it looks good in the corner of your garden. Start with a detailed plan. Draw a future hill, imagine what size stones should be present on it, whether it will be created artificial waterfall or other body of water. Choose a size. You also need to decide how high the slide should be. For small gardens, it is better to choose compact compositions. Don't forget the irrigation system. You need to bring the hoses to your slide. Start choosing plants. After that you can buy everything necessary materials. The construction of the slide begins with the installation of stones. They can be large or small. Combine different forms and sizes. The main thing is to create a landscape close to natural. Plants are planted only after the installation of stones and irrigation systems.

What plants to choose for an alpine slide

Before you create an alpine slide, you need to decide what exactly will grow on it. Study the needs of plants: do they like light or grow in the shade, does the plant tolerate waterlogging or drought, does it like acidic soils or neutral, as well as others important factors for plant growth.

Alpine hill: what to plant?The alpine hill of coniferous plants always looks impressive. You simply cannot do without them. Choose dwarf pines and firs for the lower tier, as well as beautiful junipers. Cone-shaped coniferous trees complement such a hill well. Do not plant plants close to each other, because each tree should be clearly visible. You can combine trees with different crowns on your alpine hill. For example, try to match cushion-shaped conifers with cone-shaped ones.

Flowering plants always look spectacular on the lower tier. Do not forget about succulents, these plants are unpretentious, and some of them grow well on stones. Choose winter-hardy varieties echeveria(or dig them up for the winter). rejuvenated And saxifrage- These are the most popular plants for rock garden. Rocky beetroot, perennial carnations, iberis, edelweiss can be planted on top, as well as decorate the bottom of your slide. Remember, for the upper tier it is better to choose sun-loving and undemanding plants.

Planting scheme for an alpine slide

Alpine hill in the shade: what to plant?If you decide to create an alpine slide in the shade of the house or in the corner of the site, which is often in the shade of buildings, then you should choose shade-loving plants. pay attention to host. This ornamental deciduous plant grows well in the shade. Its leaves are very beautiful, have unique patterns and colors, look good with stones. Can be planted nearby ferns. You can't do without astilbe. It blooms incredibly beautifully and loves shaded areas very much. But choose better undersized varieties. Compact junipers with blue needles also grow well in the shade. Some varieties of blue spruce are suitable for a shady area.

Basic rules for plant selection

A flower garden with a rocky garden is increasingly common on modern garden plots. It is not difficult to create an alpine hill or rock garden, it is enough to know the main plants that can be planted on a hill, as well as the principles of their placement.

In addition, the rock garden is easy to care for. The stone composition looks beautiful and original if you add several types of alpine plants to it.

We offer you the basic rules for selecting plants to create a decorative rock garden:

1. When creating a composition, it is worth Special attention give undersized plants. It is important that in size they correspond to the size of the slide, look harmonious.

2. Choose plants that will tolerate the local climate well. If the slide will be created on sunny area, then light-loving plants should be planted, and vice versa.

3. The intensity of tillering and growth of green spaces should also be taken into account. If you plant plants that grow well, close to undersized ones, small plants who love the light, then you will deprive them of the opportunity to grow and please the eye. For example, beautiful and unpretentious soapwort, yaskolka, obrietta, rezuha will negatively affect plants in the neighborhood.

4. Plants on the hill should be combined with each other in appearance, growing conditions, rates of development and growth, according to the flowering period.

Types of plants to create an alpine slide

Alpine slide is created on long time. When choosing plants for an alpine slide, give preference to cinquefoil, spirea, conifers, which grow rather slowly, but create a dense layer.

Tall herbaceous and woody plants look best next to large stones, and experienced gardeners it is advised to avoid symmetry when planting such plants.

To avoid gaps between perennials, which at first will not be able to fill the entire space of the rock garden, such places should be planted with annual flowering plants: gazania, large-flowered purslane, marigolds, gypsophila, marine lobularia and others. These plants love the sun and are unpretentious to the constant receipt of moisture, so they will fit perfectly into general form slides.

A properly created alpine slide will turn any site into a small natural wonder.

Each gardener must answer for himself the question: in what colors does he want to see an alpine hill? It is also important to create a slide plan on paper - schematically draw the shape of the slide, mark the location of the stones in the figure, and also paint over the rock garden sections with different colors to see the whole picture.

Dwarf coniferous plants look beautiful on the alpine hill, which will favorably highlight your hill all year round. Popular dwarf spruces can have several shades and emphasize the element favorably. landscape design. The same group includes juniper - an unpretentious plant in care, cypress - a coniferous plant with a golden top, as well as thuja.

Preferring deciduous plants on an alpine hill, exclude species with falling leaves, which will only spoil the overall look. Among the evergreens deciduous plants for an alpine slide, iberis is often used - a plant with white, purple or pink flowers in umbellate brushes.

The dryad looks beautiful due to white catchy flowers, as well as horizontal cotoneaster, which begins to blush in autumn and stands out favorably among other inhabitants of the alpine hill.

To make the alpine hill look harmonious and beautiful, it is worth planting shrubs and conifers one at a time, and filling the gaps between them with undersized plants.

Between the stones, along with coniferous plants, carpet plants should be planted, which in a few years will braid the hill with a beautiful canvas. These include rocky beetroot, which is distinguished by gray-green leaves that retain their color all year round. Burachok blooms with small bright yellow flowers in panicle inflorescences.

You can give preference to a short-stemmed carnation, which blooms richly with bright beautiful flowers. Saxifrageforming dense rosettes from their rosettes beautiful pillows, are a mandatory attribute of the alpine slide. Different kinds saxifrages can bloom both in the shade and in the sun.

If you want your rock garden to start pleasing to the eye already in early spring, and retain color until late autumn, you should plant tuber-bulbous and bulbous plants.

Early color will provide blueberries, snowdrops, chionodoxes. But until late autumn, their flowering will please the eye autumn crocuses, late tulips, avian, colchicum.

The Alpine hill will be perfectly complemented by a small "mountain" waterfall

The principle of tiered planting

To make the alpine slide a real decoration of your garden, you should follow the rules for planting plants, depending on the tiers. So, let's start with the top tier.

top of the hill

The top of your garden decoration is more open to the sun's rays, so it is advisable to place light-loving plants here. In addition, there is practically no moisture left at the top, so the top of the rock garden should be framed by plants that require the least moisture.

To ensure that the top of the alpine hill blooms all year round, choose ground cover plants that will bloom one after another. Browse through various plants for an alpine slide, photos and names of which will help you make your choice.

For example, in May-June, the top of the hill will be covered with fluffy iberis, and throughout the summer and autumn, the upper tier will delight you with flowering cushion-like bushes. perennial carnation that lives in mountainous areas.

If you want butterflies and bees to always hover over the top of the rock garden, you should plant plants with a pleasant honey aroma, for example, creeping thyme, which forms a carpet on the surface.

Alpine edelweiss is one of the main elements of the top of the hill. This plant loves the sun very much, and in natural environment lives on rocky slopes high mountains, however, for excellent plant growth, it will be necessary to prepare the soil mixture.

If you want to grow on top of an alpine hill unpretentious plants, then the best choice will be young.

We form the middle tier

In the middle of the hill should be plants that love the sun, but at the same time tolerate the shade well. In this place of the hill, the soil is more humid, so there will be a lot of variations for planting.

To ensure lush flowering in May, plant styloid phlox, blooming in blue, pink and white flowers. As a background plant for such bright colors three-vein anfalis, woolly chistets, Schmidt's wormwood can act.

If you prefer to decorate the middle tier of the slide not only with flowers, but also with green foliage, then universal choice there will be a brietta. This plant not only blooms beautifully from the end of May, but also has decorative foliage.

In our latitudes, geyhers, alpine aster, armeria bushes, bulbous plants, primroses are perfect for the middle tier.

To learn how to properly lay turf, click .

Create the foot of the hill

The lower tier of the slide serves as its foot, a logical conclusion. This is where the slide should connect with the rest of the garden.

The lower tier of the rock garden must be filled moisture-loving plants who feel at ease in the shade. Shrubs and tree-like plants are well suited for this, which will be an excellent accent.

To make the foot of the hill bright, you can plant lyatris with spike-shaped flowers, as well as saxifrage in the form of bushes. Having planted rhododendrons at the foot of the hill and dwarf conifers you will be satisfied with the result.

On the choice of plants for the alpine slide, see the video:

Examples of creating an alpine slide

Consider some examples of simple alpine slides.

A small alpine slide, consisting of fragrant plants, looks good.

Plant an oregano at the top to attract insects. middle tier decorate with beautifully growing hyssola, monard and sage. And decorate the lower tier of alipinaria with thyme, basil and nasturtium.

This combination of plants will create beauty in your area, and the combination of fragrant herbs will improve your mood.

Alpine slide scheme will help create beauty on your site

For lovers of a wide variety of plants suitable option alpine hill, on top of which coniferous plants are planted, for example, thuja. Near it, the coniferous ensemble can be supplemented with mountain pine and prickly spruce.

Dwarf junipers for alpine hills. Which conifers for an alpine slide to choose - photos and descriptions of the best species

Features of the construction of an alpine hill from coniferous plants