Attaching mirrors to the wall. All methods and features of mounting interior mirrors on walls made of various materials

If you do not know how and how to stick a mirror to any surface, then you should definitely read this article. First, let's start with the fact that in everyday life there are many situations related to the construction of a mirror, in which the basis for gluing can be various surfaces. Therefore, we consider several options that are most often found in life.

Attention! To glue the mirror, you can use a special mirror adhesive that does not damage the amalgam from the back. Sometimes craftsmen use liquid nails.

How to stick a mirror to the wall

First of all, you need to prepare the wall surface.

It is cleaned of irregularities.
Prime using a deep penetration liquid primer.

Now the mirror itself is being prepared. Several strips are glued to it from the back. double sided tape. They are designed to support the mirror until the glue is completely dry. Now you can apply the adhesive itself. The best option- apply glue around the entire perimeter and over the rest of the area in strips every 15-20 cm.

Now you can apply the mirror to the wall. It is necessary to support it with something from the bottom edge so that the mirror does not move off the wall under its own weight. Usually, after half an hour, the support can be removed, but the glue will finally dry only after a day.

How to glue a bathroom mirror

Usually, ceramic tiles are laid on the walls in the bathroom. You can also stick a mirror on it without any problems. This technology is not much different from the previous one. The only difference is the last step where the sealant is used. They close the gap around the perimeter between ceramic wall and the mirror itself. If the mirror has big sizes, and hence the weight, then to ensure that it does not fall off at one moment, it is necessary to carry out additional fastening with self-tapping screws.

How to stick a mirror to a mirror

There is nothing complicated here either. Although you still have to work hard. Consider two options for gluing.

Bonding is done by surfaces. This is when there is a need to stick a new mirror on the old one, which is not possible to remove. We act in exactly the same way as in the first two cases.
Two mirrors are glued together with ribs to increase the mirror area. This is a complex process that requires high precision. If both mirrors are subsequently to be glued to the wall, it is better to stick them separately, accurately exposing them to the surface. If the prefabricated structure is to be hung, it is necessary to glue both mirrors with their faces with the same adhesive composition. Note that this is a very unreliable mount, which is used very rarely.

How to glue a rearview mirror

In this case, you will need a special two-component adhesive, which can be purchased at an auto shop.

First, the installation site on the windshield and the back of the mirror stand are cleaned. Usually all this is cleaned of the remnants of the old glue. Then degreasing is carried out with alcohol. Be sure the planes are well dried.
The bracket and holder are removed from the mirror to facilitate the construction.
A special mesh tape comes with the adhesive. A blank is cut from it to fit the dimensions of the mirror stand.
The workpiece is glued exactly at the place where the mirror is to be installed.
After that, the glue is applied to the prepared plane of the mirror stand, and all this is attached to the grid with a little pressure.
Hold for 15 minutes, then remove the glue that has come out of the edges and leave it all for a day. Then you can hang the bracket and holder.

If you are interested in other ways of fastening, then read the article

Absolutely any room, whether it be a hallway or a bathroom, needs a mirror. However, when buying a separate reflective plane, there are often problems with its installation.

How to glue a mirror to a mirror, wooden surfaces, ceramic tiles, other materials? Numerous masters ask similar questions. If it is extremely necessary to fix the plane of the product precisely on vertical surface, the following will help practical advice and recommendations.

How to glue a mirror to a mirror?

To accomplish the task, it is enough to use polymer-based glue. Such effective one-component bases as "Instatic" and "Titan" are distinguished by elasticity, resistance to moisture, and temperature fluctuations. Therefore, when wondering how to glue a mirror to a mirror, preference should be given to this particular option.

Polymeric adhesives make it possible to reliably connect surfaces of the same type and differing in structure without additional reinforcement. The result is the formation of a transparent, almost imperceptible layer.

The use of a polymer base will solve not only the problem of how to glue a mirror to a mirror, but, if necessary, will help to connect heavy metal and stone planes, polystyrene plates, ceramic parts or glass. Polymer adhesive is a universal solution for numerous tasks in construction and repair.

How to stick a mirror to the wall?

The vertical surface must be carefully prepared for work, therefore, to begin with, all existing irregularities are pre-cleaned and the recesses are puttied.

Masters who have repeatedly had to look for an answer to the question of how to glue a mirror to a wall recommend using a special glue Bostik 2750MS for this. The substance is different high rates adhesion to brick natural stone, wood, metal and plastic. Even after several years after installation, the product does not corrode the mirror amalgam.

For a reliable setting of the adhesive, it is necessary to substitute some kind of support under the installed plane. In this case, the mirror should be gently pressed against the wall with your hands. Hardening of the adhesive composition, sufficient to hold the structure, occurs after 20-30 minutes, and complete setting - after a few days.

How to "plant" a mirror on the cabinet door?

This solution allows you to revive old furniture and update the interior. For a reliable connection of surfaces, it is better to select a mirror that is small in area.

First, it is worth determining the installation site by marking the appropriate boundaries with a pencil and a ruler. The mirror is attached to the surface with double sided tape, which is located along its perimeter. Next, glue is applied, which can serve as the same polymer base. After setting, the safety layer of the tape is removed.

How to stick a mirror on the windshield?

The answer to this question is quite simple. Glue the mirror on windshield allows a special Only such a solution will neutralize the impact on the compound environment and dampen mechanical vibrations in traffic.

How to stick To do this, you must first put the car in a dry room, protected from direct sunlight. Optimal for effective connection surface temperature is in the range from 18 to 20 ° C. Before gluing the mirror, it is necessary to thoroughly clean and wipe dry both surfaces.

In order for the connection of the mirror to the surfaces to give the expected result, several rules should be followed:

You need to use only one type of glue, without resorting to experiments with the connection of individual compounds.
It is extremely important to use an adhesive base with a valid expiration date. When landing a mirror on an expired substance, one should not expect its reliable fixation.
Before starting work, you need to make sure that the amount of adhesive available is sufficient for their successful completion.
For several days, try not to touch the mirror once again.
Before completing the task, it is recommended to clean the planes, eliminating irregularities, removing dirt and remnants of old glue.
If during installation the sealant in the form of double-sided tape peels off, it is enough to temporarily strengthen the surfaces with superglue.
The product, which has impressive dimensions, for safety reasons, it is better to additionally fix it mechanically by constructing a reliable stand or by placing the object on small, inconspicuous fasteners.

Finally

A mirror is an extremely fragile and expensive item. Therefore, it should be glued exclusively on high-quality and proven glue. In this case, it is necessary to follow the instructions indicated on the packaging, and strictly follow the application technology. Only in this case, a truly reliable and durable adhesion of surfaces is guaranteed.

Based on the above tips, you can turn, it would seem, difficult task by connecting the mirror with various materials into simple fun. The procedure can take a lot of free time, but it will solve the problem for a long time.

There is no object in the house more functional than a mirror. Such an element of decor is present in every house or apartment. Buying it is inseparable from the choice of the type of fastening and materials for installation. The easiest way to attach a mirror is to glue it on. For this there are special means and adhesives, and further in the article we will deal with this issue in more detail.

How and with what help to glue two mirrors together?

Sometimes it becomes necessary to connect two mirror surfaces together. Many people have a question: how to glue a mirror to a mirror, and how strong will such a design be? To do this job, there is no need to buy special tools or study smart books, you just have to put in a little effort.

There are only two ways to connect mirror planes to each other. Let's take a closer look at how to glue a mirror to a mirror.

Joining mirrors edge to edge

This method of connection allows you to significantly increase the area of the mirror sheet. This is a complex process and therefore requires special attention and accuracy. If in the future you are going to stick the connected mirror canvases on the wall, then it is better to fix them on a vertical surface separately and only after that, having figured out how to attach the mirror to the mirror, adjusting the height and gap, fasten the canvases together.

If you do not plan to hang the structure on the wall, then glue the mirrors by applying a special adhesive to the edges. This method is not reliable and is rarely used in practice, so let's consider another way to glue a mirror to a mirror.

Surface bonding

Is it possible to glue the mirror to the mirror completely? It didn't take long to find an answer to this question. And the most reliable way would be to glue them together completely. The need for such an installation scheme arises when you have an old mirror in your house that does not fit the interior, and you can’t remove it in any way. In this case, it is easier to stick a new one on top and decorate it beautifully than to gouge the walls and then try to correct the consequences of dismantling the old reflective surface.

Features of mounting a mirror on a tile

Understanding the question of how to glue a mirror to a mirror in the bathroom, we must not forget that in such a room high humidity, and the finish is made of ceramic tiles or mosaics. You can mount the mirror on a special truss using self-tapping screws, but first you will have to make holes in it.

Not everyone can cope with such a task at home, so it's easier to glue the mirror to the tile. This is not difficult to do, almost like gluing a mirror to glass, but there is one difference that should never be forgotten.

On the final stage work, it is necessary to seal the gap between the mirror and the surface on which the mirror is attached using a sealant. The installation scheme consists of 5 steps:

A special adhesive composition is applied to the back of the mirror around the entire perimeter of the canvas in a continuous layer. It is desirable to indent at least 2 cm from the edge.
In the center of the mirror back side the adhesive is applied in the form of a lattice.
Having applied a binding substance, they press it tightly against the wall and hold it for some time.
Until the adhesive base dries, the mirror must be maintained. For this, any support will do.
After the glue has completely dried, as mentioned above, the gap between the wall surface and the mirror must be treated and sealed with a sealant (white or transparent). Such a move will prevent the ingress of water and moisture under decorative design, which in the future could lead to delamination and damage to the reflective sheet.

Liquid nails or a special adhesive mixture are well suited for gluing a mirror.

How to strengthen a large mirror structure

Having figured out how to attach a mirror, think about how to strengthen it. If the design is voluminous, then this moment cannot be missed, otherwise the mirror may fall off under the onslaught of its own weight.

Special fastening is done using self-tapping screws. As an aid, use a special composition designed for such purposes. Let's figure out how to glue the mirror with glue, and what special mixtures for this exist on the construction market.

Special compositions for mounting mirrors

A special adhesive is ideal for bonding mirrors and ceramic, glass or other reflective surfaces. With it, it is easy to fix any decorative design in the bathroom. The most famous means include:

Tytan;
loclite;
DoneDeal.

Let's consider them in more detail.

Glue "Titan" (Tytan)

On the market building mixtures and adhesives, this composition has established itself as the best and most reliable. It is designed to work with different kind surfaces. Including tiling. Based on a mixture of rubber and natural resins. Thanks to these components, tight adhesion of the contacting planes is ensured. Features of the adhesive "Titan":

formation of a seam that is resistant to moisture;
ease of use and ease of application;
high percentage of adhesion;
high strength;
availability.

Glue

Adhesive with a two-component composition, in demand as a high-quality mounting agent. It consists of an adhesive and an activator. One pack of this set is enough to mount 1-2 decorative elements, depending on their size. And spray adhesive is enough to attach at least 20 reflective surfaces. By the way, rear-view mirrors in cars are attached to Locklight.

Other adhesives

The line of budget funds for fixing mirrors is represented by 3M, Permatex, DoneDeal products. These are the means High Quality available to a wide range of consumers.

Now you know how to properly glue a mirror to surfaces. different type, and you will be able to cope with this task without problems by doing the work yourself, quickly and accurately. The result is a securely attached decorative mirror structure that is pleasing to the eye.

March 7, 2018
Specialization: master in construction drywall constructions, finishing work and styling floor coverings. Installation of door and window blocks, facade finishing, installation of electrics, plumbing and heating - I can give detailed advice on all types of work.

Sticking mirrors on furniture elements is a simple but responsible process. If you make mistakes and do everything wrong, then over time the mirror will begin to move from its place or even fall and break. In the review, we will figure out how to reliably and efficiently carry out work, you will learn several ways and you can choose the one that best suits your situation.

Types of fastening methods

First of all, let's figure out what methods can be used to fix mirrors. All of them have proven their reliability, but the technology of work is different and is used for certain situations.

Mounting double-sided tape

The simplest solution that has the following advantages:

Double-sided tape allows you to glue the elements very quickly. It holds mirrors, glass, and others equally securely. sheet materials. To understand the technology, you will need a couple of minutes, and the simplest set of devices is used for work, which is in almost every house and apartment;

The cost of this option is low., but if quality is important to you, then we recommend purchasing materials not from the budget, but at least from the middle price segment. When choosing a specific solution, remember that the material must have a soft spacer; ordinary stationery tape will not work, since it is not designed for high loads;
Buying tape is easy. It is sold in construction stores, as well as in outlets who are engaged automotive parts. The second option is even more preferable, since automotive double-sided tapes are characterized by increased strength and durability;

It is best to select a double-sided tape with a thickness of 0.8 to 2 mm, it will smooth out small irregularities and provide high adhesion to the surface. Of the manufacturers, 3M products have proven themselves best, it is this option that professionals recommend.

It is best to glue the elements at a temperature of 10 to 25 degrees, it is this range that provides a strong fixation. Most often, the room has an optimal microclimate, so there are no problems with this aspect, but if the room is very hot, then it is better to wait until the temperature drops to adhesive layer I didn’t go on scotch tape and the mirror didn’t move;
Easy to calculate required amount material. Before gluing the elements, the amount of adhesive tape required for work is calculated. To do this, you must know the total weight of the mirror, 60 sq.cm is used for 1 kilogram of mass. double-sided tape;
Possibility of dismantling elements. If the mirror is glued crookedly, then you can remove it and redo the work. For this, a guitar string or a thin polystyrene tape is used, with which the foam part of the double-sided tape is cut. After that, all remnants of the old material are removed and a new one is glued.

Among the shortcomings, the following can be distinguished:

Double sided tape not suitable for heavy mirrors. If the size of the element is large and the weight is significant, then it is better to choose another method of fastening. This option is optimal for small mirrors;
It is important to purchase quality material. There are many low-quality tapes on sale that do not provide the proper level of strength.

Special formulations and liquid nails

The most popular option that allows you to stick mirrors to any surface:

Chipboard and chipboard;
Tiles in the bathroom or in the kitchen;
Wooden and veneered bases;
Plaster, concrete and puttied surface.

Since we understand how to stick mirrors on furniture, we will analyze this option in more detail. Let's start with the pros:

Low cost. The price of the compositions is low, and they are sold in all hardware stores;
Great variety of options. Are used different solutions- from special formulations before liquid nails and silicone for glass. It is best to use silicone, since liquid nails contain ammonia, which over time can damage the amalgam of the mirror and stains appear on the surface;

High reliability. If the elements are fastened according to the technology, then the fixation strength will be ideal. Below, the workflow is detailed so that you can carry out the gluing on your own.

Of the minuses, it is worth noting the following:

Impossibility of dismantling. After the composition has hardened, it will no longer be possible to separate the mirror from the cabinet door or panel in the hallway. You will have to change the entire element, and this is a big expense;
Importance proper conduct works. If the technology is broken, then there is a danger that the mirror will simply fall off over time. In addition, if the wrong composition is used, then over time the mirror may deteriorate.

Mechanical fastening method

In this case, special fasteners are used, which are designed to install mirrors on furniture. There are several main options:

metal brace. The simplest and cheapest solution, which is metal elements bent so that they include a mirror of a certain thickness. So that when fastening from excessive force, cracks do not form on the surface, silicone gaskets are placed under the lower part;

Through holders - allow you to attach mirrors to any surface. FROM outer side the installation site is closed by a decorative part, and inside there is a self-tapping screw or a dowel, depending on where the installation is performed. This option is more difficult because you need to drill glass, and this is not an easy task, besides, you will need a special drill;

Furniture fasteners with decorative overlays. Most often it is done in the form of clamps that hold the mirror from above and below, and from the outside the installation site is closed with a decorative plug of any color and shape. With this option, you can hang a mirror anywhere;

The advantages of this solution are:

This is a safe mounting option.. No need to worry that the mirror will slip over time;
Can be disassembled. If the mirror is damaged, then it will not be difficult to replace it, the fasteners turn away quickly and easily;
Lots of options. Finding the best one is not difficult.

There are also disadvantages:

Difficulty of installation. Attachment requires a screwdriver to drill holes and drive screws. If you made a mistake with the drilling site, then you will not be able to close the hole, the top coating film will be damaged;
Not a very attractive look. End caps don't always fit into the design, and that's the main problem.

How to glue a mirror to a cabinet door

We will look at how to glue the element to silicone, as this is the easiest and most reliable option. This method is suitable for any designs, the main thing is to carry out the work correctly and use high-quality materials.

Work materials

First of all, collect everything you need:

Special silicone for glasses and mirrors. It is sold in hardware stores and differs in that it does not contain substances that damage the amalgam of mirrors. In addition, the compositions of this group have high adhesion to smooth surfaces;

If you find liquid nails that are marked "for mirrors", then you can use them.

Composition for degreasing surfaces. The easiest way to remove traces of grease and other substances from furniture and the back of the mirror is with white spirit or another universal solvent. You can also use special automotive compounds for degreasing, they are more expensive, but they have almost no smell;

Mirror of the correct size. Take measurements in advance and order the item in ready-made, the ends will be processed in it, which is very important for safety.

Tool

The mirror is fixed using the following devices:

Sealant gun. With his help work will pass quickly and efficiently and the consumption of the composition will be minimal. The most suitable cheap option, since the load in the process of work on the tool will be low;

Measuring tool. To accurately determine the location of the mirror, a construction tape measure or ruler is used. And for marking it is best to use a construction pencil or felt-tip pen;
Rags for degreasing surfaces. Any clean rag will do here;
Screwdriver or screwdriver. If the mirror is placed on the door in the cabinet, then it is better to remove it, since it should lie horizontally;
heavy items. To press the glass to the surface of the furniture, weights are placed on it. You can use improvised elements or even ordinary cans in which water is poured.

Mounting process: step by step instructions

Let's figure out how to attach a mirror with your own hands:

Illustration	Description
	being prepared workplace . It is best to make a flooring on which a door or other piece of furniture is laid on which a mirror will be glued, it can be placed next to it if there is enough space.
	Preparing the cabinet door, the following steps are performed: On the surface, using a tape measure and a pencil, the position of the mirror is marked. You can even attach a cut out element, align it and make marks according to the template, this is the most accurate option; Next, the surface is degreased, for this a rag or sponge is moistened in a solvent and the base is thoroughly wiped to remove all excess.
	Preparing a mirror. To do this, the element is turned face down and thoroughly wiped with the same cloth soaked in solvent. Place a soft cloth on top of the mirror to prevent damage to the front surface of the mirror.
	Apply silicone compound. To do this, the tube is inserted into the gun, a hole is cut, after which work can begin. The composition is distributed in zigzags with a step of about 100 mm, the indent from the edges should not be more than 30 mm.
	It is necessary to accurately install the mirror according to the markup. To do this, a long vertical edge is placed along the line and aligned. If the length of the mirror is large, then it is better to involve an assistant in the work.
	The mirror gently lowers and presses against the surface. It is important to do the work accurately so that the edge does not move and the element does not warp.
	Checking the position of an element, if there are small displacements, then it will not be difficult to move the mirror a little, this is done in the first few minutes, until the silicone has seized.
	Weight is put on. It is left for a day, during which time the silicone seizes and the parts have time to stick very securely to each other.

Output

Now you know three ways to attach mirrors to furniture and you can do the work yourself. The video in the article will tell you more information on the topic, but if you have questions, write them in the comments.

March 7, 2018

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

IN modern home The mirror has long been a piece of furniture or even a highlight of the design of the room. Mirrors are installed in the bathroom, in the hallway, in the hall and even in the bedroom. From time to time, mirror glass has to be removed in order to make repairs, glue wallpaper and lay tiles. After re-gluing the wallpaper, the mirror panels return to their original places, and the question automatically arises of how to attach the mirror to the wall with wallpaper.

What prevents you from fixing the mirror on the wall

The mirror is one of the few items that can be attached to walls anywhere and in unlimited quantities. There is even a certain style of interior design that uses a large number of mirror panels of different execution. If you correctly position and fix the mirrors on the walls, you can significantly change the perception of the room and even visually expand the boundaries.

Most of the owners after the repair do not want to drill the walls and spoil the newly pasted wallpaper. Most often, they try to attach the mirror using adhesives, you just need to pick up good glue and solve the problem of how to clean dust from wallpaper after repair.

But attaching mirror glass with glue is not as easy as it might seem at first glance. Most often, problems occur in the following situations:

When trying to fix a mirror on newly pasted wallpaper. A small and relatively light mirror can stay on the wallpaper surface, but at the same time “pull” part of the wallpaper into an “accordion”. It is impossible to fix mirror glass directly on a fresh canvas, otherwise you will have to look for a way to remove wrinkles on the wallpaper after drying;
If the glass plate of the mirror needs to be attached to a water-based emulsion, latex, liquid wallpaper, drywall or a whitewashed wall. None of the materials listed are adhesive and shear friendly, so trying to attach even a small mirror is pointless - the coating will flake off.

For your information! Do not try to attach a thin mirror to the wallpaper using high-strength glue with strong shrinkage. In this case, the adhesive mass can create a strong stress on the glass base, even a small load can lead to cracks.

Most high-strength adhesives based on alcohol, dichloroethane, acetone, have high shrinkage. The exception is epoxy adhesive masses, but due to their low viscosity, it is almost impossible to attach heavy objects to the walls of the room with their help.

The opposite situation is also possible, when the wallpaper is pasted on the wall with a relatively weak CMC glue. In this case, an attempt to attach heavy mirror glass with glue will break the wallpaper panel along with the mirror.

Is it possible to attach the mirror with glue

In order to understand how to properly attach a mirror to the wallpaper, let's perform a small estimated calculation. Average weight glass base wall mirror is 2.5 kg. The fastening technology involves applying an adhesive layer 1-2 cm wide over the entire horizontal width of the wallpaper base, which is approximately 60-61 cm.

As a result, the load on the gluing line is 2500:60=42g/cm 2 . For CMC ultimate load ranges from 3 to 5 g/cm 2 , for the most durable polyurethane adhesive such as Molefix, the strength of the glued seam reaches 9 kg/cm 2 , and for cyanoacrylate, also known as cyacrine, the strength of the seam can reach 150 kg/cm 2 . The strength of the silicone adhesive is 450 g/cm2.

Any of the synthetic adhesives are strong enough to attach even a heavy mirror to a wall with wallpaper. But not everything is so simple. In order to attach a mirror with glue to the wall, three conditions must be met:

The adhesive joint must have the same strength in any direction of application of the load. Using cyanoacrylate, you can glue a weight to the wall, but only on condition that the load is directed normal to the surface. With shear and bending load, the strength of the seam decreases to 1.5 kg / cm 2;
The adhesive mass must have very high adhesion to the base of the wall. It is best if the wall surface is coated with a polymer primer. It is almost impossible to apply on lime, cement-sand, gypsum plaster polyurethane, epoxy, silicone adhesive, the material simply does not stick to the base;
The reverse side of the mirror glass is covered with a special mastic or paint, the strength of the coating is low, in addition, not all adhesives wet such a coating well. Therefore, before trying to attach the mirror with glue, it is necessary to check the adhesion of the adhesive mass to the paint.

It is quite possible to attach a glass panel to a wall with wallpaper, the easiest way to do this is if the wallpaper panels have been glued to a wall lined with plasterboard. It is only necessary to carefully prepare the surface for gluing, figure out how to remove dust from the wallpaper after repair, and choose the most durable and at the same time elastic adhesive composition that has increased adhesion to the coating on the back of the mirror. In order to attach a small mirror to the wallpaper, it is necessary to prime and strengthen it with PVA or acrylic varnish. It remains to apply glue and fix the mirror on the wall for the entire time the glue dries.

Glue the mirror to the wall with wallpaper

First of all, you should not try to stick a glass plate on the wall, as they say, “on the go”, simply by applying a certain amount of adhesive mass to the wallpaper and glass return. If the walls were not previously sheathed with drywall before wallpapering, then most likely the reverse side of the glass base of the mirror will not be able to lie flat against the wall. Contact with the wall will be at a maximum of three points. Even if you cover the entire reverse side of the mirror with glue, the contact spot will be very small, no more than 10% of the area of the glass base, which is clearly not enough to firmly hold the glass.

To attach a mirror with maximum strength, you will need to install an intermediate plate, such as a small fiberboard sheet. For the manufacture of the adapter plate, a piece of wood-fiber board of a rectangular shape is cut out, with an area of 30-40% of the surface of the glass sheet. First you will need to determine the optimal position of the mirror on the wall, make risks with chalk or a simple pencil.

Next, you will need to fix the rectangle of fiberboard on the wall. This can be done using ordinary plastic plugs and screws. To attach a mirror weighing 3 kg to the wall, you will need four self-tapping screws. Before screwing in the screws, the edges of the holes drilled in the plate are cut with an 8 mm drill and treated with PVA so that the heads enter the fiberboard flush and do not break the plate material under load. The intermediate plate should be placed in the upper half of the markup of the mirror outline, smooth side up.

Important! When screwing self-tapping screws, it is necessary to control the plane of the fiberboard plate using the level and depth of fastening screwing.

Medium-sized mirrors can be attached to the plate with silicone adhesive. Heavy and massive objects are fixed only with polyurethane adhesives. Subsequently, if necessary, everything can be removed with a thin string, which cuts the silicone layer like butter.

It is known from practice that the least suitable for fixing mirrors are:

Mounting foam;
Sealing silicone sealants;
Solid polyethylene adhesives for hot glue guns;
All types of paint, including acrylic, alkyd oil, polyurethane and epoxy;
Adhesive compositions for gluing rubber.

Any of the listed materials does not provide a sufficiently strong and stable seam with high adhesion. As a rule, all attempts to attach a mirror panel end in a negative result. Instead of glue, you can use double-sided construction tape good quality.

Mechanical mirror mounting options

The weight of mirrors can reach 10 or more kilograms, so it is not always possible to attach a massive glass plate with adhesive to a relatively weak surface of the wallpaper. In this case, reliable fixation can only be ensured by mechanical fastening.

Most often, two options are used to securely mount the mirror:

Picture suspension on a string or wire;
Hook on hooks and bars glued into the wall.

Anyway mechanical way fastening has an undeniable advantage over adhesive options. Firstly, attaching a mirror is much faster and easier, Secondly, if necessary, it can be quickly and painlessly removed, for example, when cleaning or painting wallpaper. If you attach the glass with glue, it will be almost impossible to remove it without damaging the wallpaper.

Mechanical mounts for the mirror

Most in a simple way The fastener is a picture hanger. If the mirror glass is installed in wood, metal or even plastic frame, then you can attach the structure to the wall in half an hour of work. The mounting scheme is very simple, but first you will need to make mounting points on the frame.

If the thickness of the frame allows, then it is enough to wrap one self-tapping screw on the back of the frame in each of the sides, departing from the upper edge of 10-15 cm. If the frame is too thin, then two aluminum plates with hooks can be glued instead of self-tapping screws. Between the screws or hooks we stretch with a slight sag a thin steel wire or a strong nylon cord.

According to the markings on the wall, we hammer in the dowel or cork under the self-tapping screw. We screw a small anchor hook into the cork, after which you can hang the mirrored glass. The above scheme allows not only to securely attach, but also align the structure, remove and hang back in a matter of minutes. In this way, relatively small objects can be attached to a brick or concrete wall.

Heavier mirrors can be attached using a hidden bar. Before sticking the wallpaper in the wall with a perforator, a niche 30-35 mm wide and 20 mm deep is cut out for the entire width of the future mirror. On the end surface wooden block a longitudinal groove of 10x10 mm is milled. The bar is fixed in a niche with dowels, while the groove should protrude 2 mm beyond the plane of the wall. Then it remains to pull the cord in the same way as in the previous case and attach the mirror to the wall.

If there is no frame, then the process will become slightly more complicated, you will need to glue a wooden or metal plate with ready-made screwed hooks or holes for attaching a hanging cord. Sometimes they try to attach the structure with hooks mounted on an intermediate plate. The strength of such a suspension will be no worse than that of a wire system, but in this case it will be very difficult to align the mirror with the horizon.

Conclusion

Each of the suspension methods is suitable for its type of wall. For brick and plaster concrete walls it is best to attach a mirror on a picture hanger; for plasterboard, you can use polyurethane or silicone glue, but with obligatory sizing and priming of the wallpaper with a polyvinyl acetate emulsion. If you need to attach any structure to a tile, glass, mirror, then the only possible option there will be silicone adhesive, but no sealant. Good adhesion and high elasticity of the silicone joint guarantees high strength for several years of operation, after which the fasteners need to be renewed.

home > Tests