How to remove a sticker from plastic. We remove glue from the label from plastic: household and folk remedies

.:: 10.04.2016

Today, whatever thing you buy, a label is always glued to it, sometimes more than one. Sellers stick labels tightly, especially in chain stores, so that unattended buyers do not re-stick with cheaper goods. Labels and price tags are found on every thing - dishes, packaged foods, clothes, books. There are branded stickers on any household appliances, and children love to stick beautiful pictures on the refrigerator or furniture.

Why does the question arise at all about removing traces of stickers? Because they all have a glue base of a different composition. From manufacturers, the adhesive is labeled as permanent - the most stable composition and removable: removable or non-permanent. But even removable glue can be easily removed in some cases, without any means, only while the label has been glued recently.

Try this: poke a corner of the label with your fingernail and begin to slowly pull. If the object is small, for example, a plate, then at the moment when you remove the label, breathe on this place with your mouth - a warm, humid environment helps, believe me, this method sometimes works.

If the glue is more reliable or the label has been pasted for a long time, this method will not help, you need to use other methods.

How to remove adhesive from a sticker

First, how to wipe off traces of glue: do not use cotton wool, cotton pads and synthetic fabrics. You need to scrub with a cotton rag, you can use a piece of an old terry towel.

Means that help dissolve the glue:

Vegetable oil
Alcohol
Nail polish remover without acetone
Hair dryer
Acetone
White Spirit
Gasoline (kerosene)

You should always start with the safest ones - this is vegetable oil and alcohol. As a rule, they do not cause discoloration of plastics, textiles, materials.

Vegetable oil must be applied to the price tag or label, wait until it is absorbed and then remove. Moisten a cloth with alcohol and erase traces of the price tag or label. But do not rub back and forth - the movements should be purposeful, in one direction or from the edges to the center. The fact is that this way the glue will curl up into a sticky lump, carefully you will collect a small ball. If you just rub the sticky place, then the glue will be smeared for a long time, like chewing gum.

If these remedies do not help, use a hair dryer. The hair dryer will heat the glue, it will become more fluid and it will be possible to wipe it off with a cloth, also rolling, directed in one direction. You can also heat a label that has not yet been torn off with a hairdryer.

A hair dryer or any heat (such as an iron) can only be used on objects that do not deform from heat, cannot burst or crack. For example, from dishes, from a metal surface, from a book cover, from a fabric - you can. From furniture, from cosmetic jars and tubes - be careful. But with thin plastic, household appliances, thin glass, soft plastic - it is impossible, plastic can warp, swell, glass will crack, the surface of the equipment will become cloudy.

If neither oil, nor hair dryer, nor alcohol helped you, let's think about how resistant the surface of the object is to solvents. All of them: kerosene, acetone, white spirit, etc. dissolve not only glue, but also paint from plastic, fabric, metal, Teflon and other coatings. In the best case, if you have time to lightly touch it, you will get a cloudy spot, in the worst case, the paint will be erased, the texture will be smeared.

Therefore, of all solvents, we choose the safest - nail polish remover without acetone. But you need to try on an inconspicuous corner, if the color of the object does not change, we try to wipe off the marks from the labels.

With acetone and a solvent, you can safely and very quickly clean the glue only from obviously stable or invisible surfaces - from a ceiling lamp from a chandelier, from a mirror, from a toilet bowl or sink, from a stone surface, from the bottom of a pan, flower pot, stool leg or under the tabletop. But many household plastics, such as sockets and switches, computer and household appliances, the surface of the refrigerator, deteriorate and become cloudy from contact with acetone or solvent. Moreover, the glossy surface will become matte, the matte surface will brighten, sometimes it will brighten almost to white.

How to remove a sticker without a trace

There are other ways to get rid of sticker marks. For example, another sticker will help us. You need to walk along the sticky trail with another sticky surface, it, in fact, will attract the remaining glue to itself. But if you just stick another label on, it won't work. It is necessary to remove the glue with quick jerky movements - touch, instantly tear off.

Sometimes it takes a lot of time, but if the surface of the object being treated does not tolerate solvents or a hair dryer, the labor costs are justified.

In some cases, a piece of scotch tape (very good quality) helps, but it's easier to buy any cheap baby stickers from the stationery department and use them.

If the traces of the label are not removed by anything, or it is impossible to remove them due to the fragility of the object, remember how they deal with boring tattoos - they simply fill this place with a new pattern. Think about it, it might be easier to pick up new beautiful stylish stickers and use them to mask old traces of glue, as well as scratches and scuffs.

Literally everything is decorated with sticky labels, stickers and price tags: dishes, clothes, household appliances, furniture, cars, stationery, children's toys. Sometimes the sticker comes off quite easily - just pry it with your fingernail and pull. But often a small piece of paper with an adhesive backing creates a real problem. You can remove the adhesive from the label from the glass in different ways, which are also suitable for other materials.

Any sticker must be removed immediately after purchasing the product. This rule also applies to adhesive tape, whether it is stationery, packaging or construction. If this is not done, the adhesive mass seizes tightly and it will be very difficult to remove the sticker.

For gluing labels and price tags, manufacturers use different types of glue. Well, if it is water soluble. Then it is enough to wet the sticky traces with hot water and wait until the glue dissolves. If we are talking about glassware that easily tolerates high temperatures, then a jar, bottle or plate can be soaked in hot water, completely immersing the part of the object where the label is glued. After 10-15 minutes, the sticker will fall behind the glass surface, and the problem will be solved.

However, the most problems are caused by such stickers that are planted on an adhesive composition that does not dissolve in water. In this case, various improvised means come to the rescue:

vegetable oil;
cleaning powders;
vinegar;
White Spirit;
petrol;
alcohol;
cologne;
acetone or similar solvents;
nail polish remover.

Sometimes an ordinary household hair dryer helps out, which is used to dry hair at home. If you direct a jet of hot air at the label and heat it, the adhesive will soften and easily come off. But even high temperature does not always help to immediately clean the surface of sticky marks, so after heating, you need to apply any of the listed products.

The results of exposure to a chemical or food product can be unpredictable and the appearance of the item being cleaned may suffer. For example, a cloudy spot will appear on the shiny plastic of a microwave oven door or paint will come off the car body. Therefore, before wiping the adhesive layer from the entire surface of dishes, household appliances or furniture, test the product on an inconspicuous area.

How can glue be removed?

Depending on the material from which the surface to be cleaned is made, various methods are used. The most effective are:

Vegetable oil. It is used for any materials that do not absorb oil and can be washed - glass, porcelain, metal, plastic, painted or polished wood, enamel. Not suitable for upholstered furniture, veneer and raw wood. The principle of application is very simple: remove the top layer of the label in a dry way or pre-soak it in water, cover the adhesive spot with oil (sunflower, corn, olive, essential oil), after 10-30 minutes wipe off the glue with a rag or paper towel, wash off the remaining oil with any detergent.
Alcohol. Rubbing alcohol, cologne or vodka is good at removing price tags and labels from dishes - porcelain, glass, enamel and ceramic. Apply an alcohol-containing substance to the glue stain with a cotton swab or cloth, wait 5-10 minutes and wash off the remaining glue and alcohol with dishwashing gel.
Detergent. Helps to remove stickers from clothes and upholstered furniture. It is enough to wet the contaminated area with a sponge dipped in soapy water, wait until the price tag gets wet, and remove it. True, after such a procedure, the clothes will have to be washed, but this cannot be considered a disadvantage of the method - experts advise new things and linen must be washed before the first use.
Acetone free nail polish remover. Helps remove stickers from glossy packaging, books, notepads and other office supplies. Heat the pre-treated surface with a hairdryer, rub the remaining adhesive with a cotton pad soaked in nail polish remover.
Refined gasoline or white spirit. Suitable for upholstered furniture, plastic, glass and unpainted wood, but may ruin unstable colors or delicate surfaces. When removing the adhesive layer, rub the stain with a piece of cloth soaked in the preparation and rinse with water and any detergent.
Scotch. This method is from the category of "wedge wedge". It works well to remove fresh stickers and small price tags, until the layer of glue under them has hardened. It is necessary to firmly stick the adhesive tape on the label and pull sharply. If glue marks remain on the surface of the object, the manipulation must be repeated several times until the glue stain completely disappears.

A regular stationery eraser can also be used to remove labels and adhesive stains from a hard surface. With it, it is easy to clean small dirt, and for large areas it is better to use other means.

Sometimes it becomes necessary to clean a glass jar or bottle from a sticker in order to use it later for household purposes (canning, food storage) or decoration. Labels can be removed mechanically - soak in water, scrape off the paper with a knife, and rub the traces of glue remaining on the glass with a steel wool. Glass is the only material that is not afraid of chemicals, abrasives, or mechanical stress.

Special funds

The problem of removing labels has become so urgent that manufacturers have launched the release of special tools that help clean glue stains after adhesive tape or stickers. These drugs are available in the form of aerosols and are not cheap, but if there is no other way out, it is better to spend money on buying a can than to ruin the body color of a new car, refrigerator or plastic furniture for a summer residence.

According to user reviews, they have proven themselves best:

Scotch Remover - contains a mixture of citrus oils, removes traces of adhesive tape, stickers, ink, tar, resin and other components;
glass cleaner Fine Glass - cleans traces of glue, dust, grease, dirt without streaks, suitable for ceramics, chrome surfaces and electrical household appliances;
universal cleaner Profoam 2000 - removes traces of glue and marker on different surfaces;
anti-scotch ASTROhim - removes the remnants of adhesive tape, stickers and sticky tapes, suitable for glass, metal, ceramics, plastic, does not spoil the painted surface;
Liqui Moly sticker trace cleaner - effectively eliminates sticker and label traces, contains natural ingredients;

Those who consider it impractical to purchase an expensive drug to remove one or two labels can try various improvised means that have proven themselves well in the “cleaning” business:

vinegar;
micellar water;
spray for preliminary removal of stains from clothes;
bituminous stain cleaner;
glass liquid;
baking soda;
antistatic spray for clothes.

Many stickers can be easily removed with water vapor: for 5-10 minutes, you need to hold the label over a pot in which water is boiling, remove the sticker with your hands, and wipe off traces of glue with a dry cloth.

If we are talking about an empty bottle, then you can pour boiling water into it and after 5 minutes just remove the sticker with your hands.

Conclusion

When choosing any of the proposed options, it is necessary to take into account the characteristics of the material on which the label is pasted. If glass is able to withstand any test (hot water, vegetable oil and chemicals), then many types of plastic or wood can suffer from such treatment.

In any modern supermarket, all goods sold are supplied with bar codes. This is a simple and convenient way to keep track of goods. Manufacturers themselves like to glue their products with multi-colored labels. But what should buyers do? How to wipe the glue from the sticker from dishes, children's toys and other freshly purchased household items?

The easiest way to get rid of extra labels

Informational and promotional stickers are glued today on a wide variety of products. And if the price tag on a cosmetic bottle can be diligently ignored, the same label on the dishes must be washed off. How to remove such a sticker? Try to just peel it off. Grab the corner of the sticker with your nails or the tip of a knife and pull. Don't be discouraged if you only manage to peel off the top paper layer. We will talk about how to wash adhesive traces below. A great way to deal with barcodes is to try heating the sticker with a hot hair dryer. If the label does not come off even after exposure to heat, try soaking it in warm water. The exposure time is individual, in some cases it is necessary to wait 12-18 hours. When the paper and glue are completely wet, it's time to try to gently wash them off the surface of the product.

Vegetable oil to get rid of adhesive traces

When wondering how to wipe off the adhesive from the glass sticker, it is quite difficult to make the right choice. Mechanical methods of influence will not help here - the risk of leaving scratches is too high. Try one of the safest and most effective ways to get rid of glue marks. Soak a cotton swab in vegetable oil and generously process the entire surface of the sticker. The paper layer of the label must be removed beforehand. After 1-3 minutes, rub the glue with a cotton swab or a piece of soft cloth. All residue from the sticker should be easily removed from the surface, rolling into spools. Finally, wash the product with dish detergent. Vegetable oil can be used on surfaces made of any material. Now you know how to wipe off the adhesive from the sticker without fear of scratching the product.

There is another safe way to completely remove sticker residue. Moisten the adhesive traces with alcohol and rub with a soft sponge or cloth. Instead of an antiseptic solution, you can use any cosmetic alcohol-containing product. Cologne, perfume or cleansing lotion will do. How to wipe the glue from the sticker if none of the above is at hand? Try using ammonia. Be prepared for the fact that it has a pronounced smell that not everyone likes. Alcohol does not scratch the surface and is not able to dissolve it. It can be used on products made from any material. If you have to clean a brightly colored surface, try applying alcohol to an inconspicuous part and see if there is any reaction. The thing is that alcohol-containing solutions can dissolve some types of dyes.

Eraser and wet wipes against glue

Almost all types of plastic used in everyday life are afraid of exposure to aggressive chemicals and abrasives. How to wipe the adhesive from the sticker from the plastic so as not to spoil it? You can try to get rid of adhesive traces after removing the paper part of the label using ordinary wet wipes. It is advisable to choose those that are impregnated with alcohol lotion. Take a napkin from the pack and rub it with the glue spot, trying to soak it strongly. Repeat this simple manipulation until you manage to perfectly clean the surface. You can also wipe off traces of glue in a dry way. To do this, you will need a regular stationery pencil eraser. Try to wipe off the glue with it, as if you are trying to get rid of excess inscription. In conclusion, do not forget to wash off the traces of the eraser with soapy water.

Will solvents help?

If the remnants of the sticker have literally eaten into the surface of the base of the product, it's time to try aggressive products. Be careful: acetone and other solvents are not recommended for cleaning plastic, rubber, latex and some other materials. It is unacceptable to use such aggressive agents when removing stickers from paintwork. To begin with, be sure to conduct a test: apply a little solvent to the product that needs to be cleaned of glue in an inconspicuous place. Only after making sure that the selected composition does not spoil the surface, you can start cleaning. How to wipe off the glue after a sticker from potent agents? Try using nail polish remover, acetone, or any other household solvent. Using a cloth, apply a small amount of the selected substance to the dried adhesive and carefully try to wipe it off. After removing the remaining sticker, do not forget to rinse the treated area with clean water.

Degreasers

You can get rid of persistent adhesive traces with the help of surface degreasing agents. The most famous and affordable among them is WD-40. Moisten the sticker liberally with a degreaser. Then start rubbing it with a sponge, moving from the center to the edges. If necessary, apply a little more product to the treated area. Be sure to thoroughly rinse the treated area. Do not forget that WD-40 is a technical tool, it should not be used on surfaces in contact with food. After cleaning is complete, wash off any remaining degreaser with soapy water. And then let the surface dry.

Household chemicals will help get rid of glue

How can you wipe the adhesive off the sticker if there are no specific products at hand? Try using gels and sprays designed for home cleaning. Good results are given by compositions intended for washing glasses and mirrors. They usually contain alcohol, as well as substances that dissolve persistent pollution. If you are not afraid of scratches on the surface being cleaned, you can try to wash off traces of glue with an all-purpose cleaning powder or a kitchen cleaner with active granules. They do a good job with many types of adhesives for washing dishes and washing clothes. They are most effective when used after pre-soaking the rest of the sticker.

State-of-the-art sticker removal methods

You can buy adhesive removers from home improvement stores. Usually they are called "anti-glue". In fact, these are solvents designed specifically for adhesive formulations. Using them is very simple: just apply the substance on the traces of the sticker and wait for the time indicated in the instructions. Be careful, some products in this category are very aggressive, it is recommended to use them only with protective gloves. Be sure to read the directions for use on the packaging. How to wipe the glue from the sticker from metal and other surfaces? You can get rid of traces of the label with a melamine sponge. This cleaning accessory appeared in our country relatively recently and is already quite popular today. Attention: melamine sponges are only suitable for use on surfaces that do not come into contact with food. Before cleaning, it is not necessary to soak the adhesive, the dirt to be cleaned must be dry. Prepare the sponge for use as indicated in the instructions, then simply rub the adhesive traces with its corner. Finally, wash the surface with water and detergent.

What is the easiest way to wipe the glue from the sticker?

Each housewife has her own ways of laundering labels and stickers. Some prefer to simply soak and scrape the stickers off the surface with a dull knife or spatula. However, this method is only suitable for scratch-resistant materials. You can quickly get rid of hardened glue with the help of solvents and aggressive chemicals. The disadvantage of this method is that there is a high risk of surface damage. In our article, there are many ways to clean various materials from labels. On delicate surfaces, try using vegetable oil, alcohol, or window cleaner. Now you know how to wipe off the glue from the glass or plastic sticker. If the selected cleaning option did not help, be sure to try another one. Labels and stickers stick to a variety of adhesives, which means it's not always easy to find the right cleanser the first time.

Almost all goods purchased in the store are supplied with adhesive labels. They can be easily removed mechanically, but often a sticky residue from the adhesive base remains on the surface. It can be difficult to clean it, since the glue is not washed off with water. However, there are several effective ways to remove adhesive from plastic and metal surfaces.

Stickers are made from different materials and their adhesive base has a different composition and quality. The adhesive residue remover is selected depending on the type of surface and the characteristics of the label.

To clean the surface of the adhesive, improvised means are used, such as a sponge, eraser, vinegar, kerosene, sunflower oil, alcohol, etc.

To remove adhesive traces, it is advisable to use the safest means - vegetable oil and medical alcohol. These substances scrub off the adhesive without damaging the surface of the product.

Precautions must be observed. Before cleaning the surface, it is necessary to check how the product behaves on a particular material. To do this, apply a small amount to the surface to be cleaned and see if it leaves an indelible stain.

Methods for removing glue from plastic and metal

Removing the label from plastic or metal products is not difficult. But the adhesive base sometimes adheres very firmly to the surface and is not removed mechanically. In addition, plastic is not always smooth, and adhesive is more difficult to remove from a rough surface.

There are several effective ways to remove stickers and adhesives from plastic and metal products.

mechanical way

Suitable for easily removable labels. Even if the label was removed without problems, it still leaves a small adhesive residue. Adhesive residues can be removed mechanically. It is necessary to rub the remaining glue in one direction, gradually rolling them into a ball. It is not recommended to remove the label with nails, as they can be easily broken. It is better to use a spatula or penknife.

Residues of glue cannot be washed in different directions, as the glue will be smeared on the surface.

Vegetable oil

To remove the glue, you need to treat the contaminated area with vegetable oil. Then leave the thing for 10 minutes so that the oil soaks the contaminated surface. The adhesive will then soften and can be scraped off with a discarded plastic card. If it is not available, you can use a metal ruler or penknife.

After removing the contamination, the remaining oil must be washed off using dishwashing detergent or laundry soap.

Vegetable oil can be replaced with other fat-containing products, such as mayonnaise.

Essential oils

Sometimes essential oils help to get rid of glue stains. But they are not suitable for all types of plastic. Before removing essential oil contamination, check its compatibility with the selected surface by dropping a small amount of the substance in an inconspicuous place.

If there is a stain that does not rub off, you should choose a different cleaning method. In the absence of traces, cleaning by the chosen method is quite possible. The surface must be cleaned in the same way as when cleaning with vegetable oil.

Citric acid and cleaners

Citric acid has the ability to dissolve label adhesives and other sticky substances. You can sprinkle the contaminated surface with citric acid in its pure form or use the means in which it is included. These include the ZM industrial cleaner or the Mister Muscle wiper.

After the contamination is removed, the agent is washed off with water.

Alcohol

Alcohol will help remove adhesive from the sticker from plastic or metal. It is possible to use medical alcohol or other alcohol-containing liquids, such as vodka or cologne.

To wash the surface of the glue, you need to moisten the sponge in alcohol and wipe the stain.

masking tape

Masking tape works well for removing fresh glue stains. You need to cut off a piece of tape, direct it with the sticky side down and soak the pollution with quick, jerky movements until it comes to naught.

For stickers that have been stuck for a very long time, this type of cleaning is not suitable.

Vinegar

Vinegar is suitable for both old and new labels. To get rid of stains, vinegar should be taken at 6 or 9%. The sponge is soaked in vinegar and the dirt is rubbed off until the stain disappears.

Then you need to rinse the cleaned area with water and wipe dry. Cleaning with vinegar will help even if the glue has dried very firmly.

Removing labels with a hair dryer

To remove a sticker that cannot be removed with improvised means, you can use a hair dryer. A jet of hot air is directed at the sticker for several minutes, after which the sticker can be easily removed.

This method is good for removing stickers in the car interior and on the body. A special tool that can be purchased at car dealerships will also help get rid of glue residue.

In the modern world, all goods are pasted over with stickers, price tags, advertisements, special retaining films, whether they are dishes or household appliances. Everything would be fine, but one thing upsets - it’s impossible to tear off the “pleasant eye” stuck price tag just like that, and if it was peeled off, then a sticky trace remained. In this case, the question arises, how to remove the adhesive from the sticker?

How to remove adhesive from a sticker?

How to remove adhesive from a sticker. Each surface on which there are traces of glue from the sticker, as well as the sticker itself, is made of a specific material that requires its own method of removal from the product. Follow the link to quickly solve your problem if you need.

Depending on the surface to be cleaned, choose the products that are suitable for you, which will be useful in the process of removing traces of the sticker.

vegetable oil;
vinegar;
mayonnaise;
alcohol;
ammonia;
essential oils;
citrus-based cleaners;
nail polish remover;
kerosene;
lighter fluid;
glass cleaner;
scotch;
spray for cleaning cuffs from Amway;
melamine sponge;
rag:
sticker removal spray "Label off"
old plastic card;
iron;
sheets of white paper or napkins.

How to remove adhesive from a sticker?

Here are some ways to remove adhesive stains from plastic, glass, ceramic, iron, Teflon and wood surfaces.

Method 1

With my own hands. This method is used if the sticker is easily removed:

Rub a slightly sticky trace of glue with your fingers and roll into pellets.
If the adhesive is not completely removed, proceed to the methods described below.

On a note! Do not use nails to avoid breakage.

Method 2

Every housewife in the kitchen has a bottle of vegetable oil - it can be olive, rapeseed or refined sunflower. They are used in the following way:

Take a paper towel or cotton rag.
Soak in oil.
Treat the glue mark.
Let it soak in - the oil will soften the adhesive and make it easier to remove.
Scrape off the adhesive from the sticker with your fingers, a plastic knife, or an old card.
Wash the area with detergent.

On a note! You can use mayonnaise instead of butter. This method is only suitable for painted or varnished wooden surfaces..

Method 3

Without much effort, traces of stickers are removed with essential oils:

Apply a few drops of essential oil to the sticker mark.
Rub with a rag, roll up the remaining glue.
Rub the area with a paper towel.
Repeat if necessary.
Use a glass cleaner to finish cleaning.

On a note! Try this product on an inconspicuous area first, as it may leave stains in some cases.

Method 4

Use citrus-based cleaners. They contain citric acid, which corrodes the sticky substance.

We offer several options:

Spray cleaner 3M Industrial Cleaner - suitable for delicate surfaces.
Mister Muscle quickly and effectively removes dirt and does not leave streaks.

To use them, do the following:

Apply the remedy to the stain.
Leave for a while.
Wipe off with a rag or paper towel.
Wash off with water.
Polish if necessary.

We have also prepared for you a separate selection of effective tools and useful tips. These methods are suitable for removing adhesive tape from the surface of the laptop.

Method 5

When cleaning from traces of the sticker, use medical alcohol or alcohol-containing substances (vodka, perfume, cologne, deodorant):

Soak a sponge in the product.
Wipe the surface to dissolve the adhesive from the sticky label.

On a note! Use this method carefully, test the alcohol solution on an inconspicuous area before use, as different types of surfaces react to alcohol in different ways.

Method 6

Use masking tape. Use this method if the remaining traces of the sticker are fresh:

Stick a piece of duct tape on the sticker mark.
Fix the tape in your hand.
Pull off with a quick movement.
Repeat the action as needed.

This and many other methods suggested in another article at the link will help you.

Method 7

To remove old transfer stickers, collages, price tags and read traces of glue on various surfaces, use table vinegar:

Apply vinegar with a sponge.
Leave to take effect.
Scrape off any remaining adhesive.
Wipe the area with a damp cloth.
Repeat if necessary.

Method 8

Use kerosene or lighter fluid as a cleaner. Use these products carefully on plastic and painted wood surfaces - the substance has a dissolving effect:

Drop the product onto a soft cloth.
Remove sticker residue.
Wipe with a damp cloth.

Method 9

For old sticker stains, use a hair dryer. Hot air melts glue:

Gently heat the stain with a hair dryer.
Use a plastic object to tear off the melted glue.
Soak a rag in vegetable oil.
Wash off the glue.
Wash the cleaned surface with soapy water.
Wipe with a damp sponge.

On a note! Use this method carefully with plastic, as not every type of this material is heat resistant, may melt or leave yellow spots. Do not use the heat treatment method on varnished surfaces - the varnish may turn white or swell from hot air.

Method 10

If you have cleansing wet wipes on hand, these can also be used as a remedy for a trace of glue. Just rub the surface until the sticky area is completely gone. This is the easiest way. And we have prepared a lot of tips for you, from any surfaces in the house and car.

Method 11

If the price tag is stuck to a paper or cardboard surface, nail polish remover will help you remove the sticker:

Heat the sticker with a hair dryer.
Take a plastic card and scrape off the sticker.
Wipe off the remaining glue with a sponge or swab dipped in the product.

On a note! Do not wet the cotton wool or sponge too much, otherwise the surface may be damaged..

Method 12

On all hard surfaces, use a malamine sponge, which is like an eraser to clean stubborn dirt. This option is perfect, for example, for those who are wondering how to remove a sticker from glass. The usage principle is as follows:

Wet the surface lightly.
Scrub the stain with the corner of a sponge.

On a note! Do not use the sponge on surfaces that will come into contact with food.

Method 13

This method is effective for all surfaces. Use a professional special product to remove any traces of stickers - label remover spray "Label off".

On a note! Before use, carefully read the instructions for use of the product.

How to remove a sticker from clothes?

On clothes, too, it is often necessary to “tear off” the price tag or manufacturer’s sticker. And you can do it quickly enough if you use the tips below.