How much does a cast iron bath weigh? How much does a cast iron bath weigh?

Steel bathtubs are popular. They are relatively inexpensive, look attractive, and are available in a large assortment. On sale are models made of steel of traditional shape and standard size (150 or 170 cm), however, you can also find bathtubs complex shape- angular, multifaceted, asymmetric, etc. When choosing, it is necessary to pay attention to such a parameter as the weight of a steel bath, since this indicator affects the quality.

Buyer wishing to choose best model steel bath, as a rule, asks a lot of questions to the consultant. Consumers are often interested in bath production technology, enamel quality and other indicators. But few people take into account the weight when choosing a steel bath.

Meanwhile, this indicator characterizes the quality of the product and indicates that the purchased plumbing will serve long years and will not require replacement after a few months. Consider how much weight a steel bath should have, and what moments of operation this indicator affects.

What affects the weight of a steel bath?

Such an important indicator as the weight of a bathtub made of steel characterizes the quality of the model. If the steel bath has too little weight, then this indicates a lack of high quality products. The low weight of the plumbing model is a sign that the steel bath has too thin walls. The standard wall thickness of a steel bath is 1.8 mm. However, high-quality models have a wall thickness of 3 or even 3.5 mm.

Advice! It must be said that the thinner the walls of the bath, the greater the risk of their deformation from loads. At the same time, the choice of models with a standard wall thickness is much larger, as they are in high demand due to their affordability.

What should be the weight of the tub?

The weight of the bath depends not only on the thickness of the walls, but also on the dimensions and shape of the model. Modern manufacturers produce steel baths different sizes and forms. The smallest are sitz baths with dimensions of 90 by 60 cm, there are models 1 meter long and 70 or 90 cm wide. Such baby baths have a weight in the range of 13-15 kilograms.

Models of standard form with a side length of 150 cm have a weight of about 20 kilograms. And if the length of the bath is 170 cm, then its weight will be in the range of 30-40 kilograms. If a model with a length of more than 170 cm is selected, then its weight will be in the range of 35-55 kilograms.

Advice! The steel tub weights given above are approximate. Depending on the production technology, everything can change somewhat. For example, an imported steel bath 170 cm long is likely to weigh less than a domestic counterpart. But this is not due to the low quality of the product, but to a different technology adopted abroad.

What else can affect the weight of the tub?

The weight of the bathtub not only characterizes the wall thickness, but also affects other characteristics and installation moments:

How can the performance of a steel bath be improved?

To eliminate the negative aspects of using the lungs steel baths using special mounting techniques.

Increasing resilience

To improve stability light steel bathtubs will use the following installation techniques:

Installation of foam concrete or brick columns under the bottom of the bath. Such additional props will not allow the bottom to “play” and increase the stability of the bath.
The bottom of the bathtub is recommended to be additionally covered with a layer polyurethane foam, leaving free the location of the drain and overflow holes.

Reduced heat loss and noise reduction

Steel has a high degree of thermal conductivity, so the bath warms up quickly, but the water in it cools faster than in cast iron or acrylic. To eliminate this drawback, and at the same time reduce the noise level during water intake, it is recommended to cover the entire outer surface steel bath with polyurethane foam.

The thickness of the polyurethane foam layer should be about 4 cm. You can close the outer surface of the bath by installing a special screen. It is important that the screen be removable or have doors that provide access to the water drainage system from the bath. If the bathroom in an apartment or house is spacious enough, you should think about purchasing such a plumbing item as a freestanding bathtub. Such models look very presentable, and ...

Today, much attention is paid to the equipment of a bathroom and the selection of plumbing. If desired, it is possible to purchase a bath of the most bizarre shape, however, there are still many adherents of the classics. TO...

Many people ask how much cast iron bathtubs weigh. And how much does this figure affect operation under normal conditions?

Even in the Soviet Union, nothing was available to the ordinary buyer, except for cast iron products in the sense of plumbing. And in our time, this material does not lose its relevance, but it remains in demand for a narrow circle of buyers who have special requirements for the objects around them. The durability and strength of this material has long been known to everyone. It remains to answer the question: how much does it weigh cast iron bath 150×70?

Many buyers find cast iron bathtubs to be heavy. And for many, this becomes a serious drawback, a reason to think. When choosing plumbing, many factors matter, and the weight indicator was no exception. Cast iron can be shaped into any shape, but it can be so heavy that it can be difficult to transport.

cast iron bath weight

Typical designs in the size of 150×70 at times Soviet Union weighed about 100-120 kilograms. Currently, such products are produced not only in our country, but also abroad. Such analogues weigh much less. How much does a 170x70 cast iron bath weigh? The difference between domestic and imported developments can reach up to 20 kilograms.

But manufacturers from foreign countries often try to save on material. Including, on its characteristics such as thermal conductivity and strength, overall quality.

Dimensions of bathtubs made in foreign countries are often smaller than desired. For example, a depth of 35-37 centimeters is often found. For average people, this space is clearly not enough.

Novokuznetsk produces models that have the same weight as in Soviet times. And the depth reaches 45 cm.

Each manufacturer develops its own the lineup. Take Jacob, for example.

REPOSE2915-00: holds 119 liters of liquid, weighs 139 kilograms, measures 170x80;
PARALLELE2948-00: holds liquid up to 82 liters, weighs 18 kilograms less, dimensions: 170×70;
MELANIEE: designed for the same 82 liters. Weighs 90 kilograms, dimensions: 170 × 70.

Are there other important indicators

The bath always affects the materials it comes into contact with. Overloading is not only related to the own weight of the structure. We must also take into account the person who is inside along with the water.

cast iron bath weight

For example, we take a bath weighing up to 100 kilograms. The water in it weighs half of this figure. Inside is a person weighing up to 100 kilograms. The weight of the cast-iron bath in this case will reach 700 kilograms.

We take into account the area of 1.1 meters squared. The support area is slightly larger - almost 2 meters. It turns out that for one square meter pressure is about 320 kilograms. If the overlap is concrete, then this value can be called acceptable.

150-200 kilograms - the weight that wooden-based structures can withstand. A cast iron bath can also be placed on a tree, but additional reinforcement is required. Many manufacturers have learned to make bathtubs that are much lighter, while at the same time possessing sufficient strength. The wall thickness is at the level of 1 centimeter, but the heat capacity remains at a normal level.

The most common shape is a rectangle. It is clear that in this regard, cast iron does not give a very wide scope for fantasies and the implementation of design ideas. But you can choose any color solution, accessories set.

From time to time, an update requires the coating of such bathtubs, created from enamel. During operation, chips and cracks inevitably appear on the working surface. When purchasing a bathtub in a store, it is necessary to separately monitor the absence of chips and smudges on the material, places where there is too much color, or it is too bright.

Cast iron - about the disadvantages and advantages

What are the benefits of such products? There are only a few of them.

Lightweight and easy care. Enameled coating initially retains high level quality. Therefore, even household chemicals, temperature changes do not harm the coating.
Manufacturers always give a guarantee for any products. It can be in the range of 3-25 years.
Water does not make noise during typing, which often affects steel products.
Water stays warm longer in cast iron than inside steel. But acrylic in this case is the clear leader.
Due to the serious weight, most of the vibrations that can appear during operation are eliminated. For a person, they are almost invisible, but this is what often becomes the reason why the tightness at the joints is broken.

Cast iron bathtubs can actually last up to 25 years or more.

Still, it is the weight indicator that can become not only an advantage, but also a disadvantage. The design can weigh more than 100 kilograms. Because of this, transportation becomes much more difficult, and loaders have to be paid more.

Acrylic bathtubs can weigh a maximum of 30 kilograms, while cast iron can weigh between 80 and 150 kilograms. In addition, specialty stores do not offer as many shapes and colors as we would like.

What is the weight of a cast iron bath

Learn more about sizes

170, 150, 120 cm - the most common length indicators;
as for the width, it is in the range of 70-75 cm;

Cast iron bath has a whole range of characteristics, which may depend on the size. In particular, we are talking about wall thickness, weight, and so on.

There are standards in Europe for height. Deeper models should have a height of 40-46 cm, standard excluding legs - 40-42.

Some more features

There is not only the classic version. You can purchase models in which the design is equipped with additional handles for increased convenience. In addition, there are models with special floor mats to prevent customers from slipping.

Issued different models cast iron bathtubs both in class and in cost. At the same time, the materials remain the same, the appearance may be the same. But, for example, in higher-end designs, a better enamel coating is used. It is able to maintain its appearance for many years.

In China, the production of fakes for models from Europe has been launched. They have lower prices.

What you need to know when buying cast iron bathtubs

It is necessary to take into account a number of nuances in order to make the right choice.

What size bath should be? It is important to take into account not only the dimensions of the room, but also the personal wishes of the buyers.
If a new bath purchased as an alternative to the old one - you need to remember what the weight of the old model was.
What form is needed in this case.
What are the financial possibilities.

It should be borne in mind that in online stores the choice can be much larger than in conventional stores. Online stores are also convenient because you do not have to spend a lot of time visiting real sales offices to place an order - just contact the managers by phone.

cast iron bath weight

Only when choosing it is recommended to specify as many characteristics as possible. Separately, it is worth asking about the conditions under which delivery is carried out. If there is an old bathroom, you need to ask if the store employee can take out the old model.

How to install

This process consists of several main steps:

The bath must be brought into the room before installation begins.
With the help of brackets, the parts of the legs are attached, you will also need a set with bolts. The main thing is to turn the bath over in advance so that the lower part is at the top.
Siphon and drain-overflow structures - installation of fittings is carried out at the next stage. There should be an inlet in the bottom hole. At the lower end of the tee, it is necessary to screw in a disassembled pipe. It is then inserted into the socket at the siphon.
lean towards drain hole the bath itself is optional. But you need to use a level to correctly calculate the levels for the slope. To drain most efficiently, you can adjust the part where the support is located. In addition, this will help make the bath itself more stable.
It is necessary to treat with special sealants the places where the bath is adjacent to the wall. The main thing is that it fits as tightly as possible to the wall.
After that, parts of the sewer and spillway fittings are connected together. A water shutter mechanism is installed on the outlet valve. It is to this part that we then attach the outlet pipe.

It is important to pay special attention to grounding. To do this, one end of the wire is connected to a special spout located on the surface of the housing, and the other to a PE bus or to a potential equalization system. At the last stage, it is necessary that the bath is filled with water. This will allow you to check how strong the connections turned out to be. Then you can remove the drain plug and inspect each joint.

Before the operation process begins, it is advised to fill the structure with 5-7 liters with cold water and then lower them. And only after that you can go to hot water normally.

Cast iron bath in the interior of the bathroom

Enamel chips and cracks on the surface are unacceptable. Fasteners, legs and the bath itself - required elements in any set. Before paying, you must definitely check how complete the package was sent. For some, the large weight of cast-iron bathtubs can be an advantage, but for someone, a serious disadvantage. It all depends on the specific wishes, preferences and requirements of each buyer. If you do not take them into account in advance, then you can face serious troubles. After all, it is very difficult to replace a bath, it is bought for at least a few years for sure.

Of course, this issue can also be resolved, but then it cannot be avoided. additional costs. It is better to take into account all the factors in advance, then there will definitely not be any questions and problems. And the bathroom will delight customers for a very long time. Sellers are always happy to consult and talk about the features of a particular product in order to facilitate the choice of their customers. They are ready to offer further Maintenance if necessary.

So that the purchased cast-iron bath does not cause disappointment, choosing it, you need to be guided by the following characteristics:

the size,
depth.

The last parameter is often overlooked.

Before you start choosing a purchase, measure your bathroom. A third part is allotted for a bath in it and nothing more. The area of the room will be the main defining moment.

The following types of cast-iron bathtubs are distinguished by size:

The smallest. Their width, as a rule, is 70 cm, but the length can be 120, 130, 140 cm. It weighs from 77 to 84 kg. This is - perfect solution for small apartments. A small bath will fit well into a small room, or unusual layout. These dimensions, of course, will not allow you to lie down, but a semi-sitting or sitting position is quite acceptable. It is also suitable for families with small children. Bathing them in it is easy.
Small. This is the most common type of cast iron structures. Their length is 150 cm, and their width is 70 cm. Their weight is 92-97 kg. Capacity - about 170 liters. Ideal for small bathroom decor. It can be used by people of average build.
Medium. Their weight starts from 100 kg. Their width is the same as those described above, but the length is 160 cm. It contains 173+ 2 liters of water. The sizes are quite comfortable, but they are not easy to find.
Large. The length of a large cast-iron bath is 170 cm, the width can be 70 or 75 cm. The weight ranges from 113 to 119 cm. It holds a little more than 180 liters. If the bathroom is elongated, then it will be a real find for its owners.
Very large baths. Their length is 180-185 cm, width - 70, 80, 85 cm. Capacity 190+ 5 liters. The product weighs at least 115-120 kg. It is possible to install it only in rooms of a very large area. If you wish to accept water procedures maybe even together.
Huge. Their length starts from 2 m, width - 85 cm. Owners of large bathrooms can afford such dimensions. It is ideal for people with a lot of weight. As a rule, in open sale they don't happen. This is exclusively made to order.

A cast iron bathtub is a classic piece of plumbing. In Soviet times, these durable and affordable fonts were in almost every home. Today, acrylic and steel bathtubs are gaining more and more popularity, but cast iron products remain in demand. One aspect to consider when purchasing such a piece of plumbing is its weight, which can be significant. Finding out in advance how much a cast-iron bath weighs is important both to ensure its comfortable transportation and to comply with safety rules during installation.

The main parameters that affect the weight of the cast iron bath:

length;
width;
depth;
Wall thickness;
metal density.

Typical dimensions of bathtubs:

length - from 120 to 200 cm in increments of 10 cm;
width - from 70 to 85 cm in increments of 5 cm;
depth - 35-60 cm.

It should be noted that earlier products were produced with thicker walls and high metal density. Modern technologies make it possible to produce fonts with a smaller casting thickness, but their consumer properties are not lost. Finding out the weight of the bath, you need to take into account the year of manufacture. For example, in search of an answer to the question of how much a cast-iron bath 150x70, made during the Soviet Union, weighs, you can find information that the mass of the product is 105-110 kg. A new font with the same dimensions weighs less.

Consider how much a 170x70 cast iron bath will weigh, as well as products with the same width and a different length:

150x70 - 80-90 kg;
160x70 - 85-95 kg;
170x70 - 95-110 kg;
180x70 - 115-135 kg.

Cast iron bath weight with other parameters:

Weight, kg
Length/width, cm	75	80	85
150	90-100	100-110	110-120
160	95-105	105-115	115-125
170	110-125	125-140	135-145
180	130-150	145-165	160-180

Given standard sizes cast iron tubs are typical for domestic products. Imported plumbing items, as well as products with unusual shapes, may have a different weight. It must be indicated in the data sheet. Foreign baths are usually lighter and less deep.

Note: The weight of a cast-iron bath is especially important to consider if the housing is located in apartment building no freight elevator. In order to deliver a heavy oversized font up the stairs, it will be necessary to use at least four loaders, while they will have to deploy it and lift it above the railing.

Advantages and disadvantages of a cast iron bath

Cast iron bathtubs are characterized by many advantages, including:

Durability. The hot tub can last more than 25 years if properly maintained and maintained, as the alloy is very resistant to deformation and damage.
Noise absorption. Thick cast iron walls absorb the sound of running water and vibration.
Sustainability. Considering how much a standard cast-iron bathtub weighs, it is understandable that it is not easy to accidentally turn it over or budge. It can withstand people weighing over 100 kg. There is no need to install a special podium that prevents bottom deflection, as well as to use additional fasteners.
Heat retention. Sanitary cast iron maintains high water temperature for a long time. The liquid in the bath remains warm enough for 30-40 minutes.
Ease of care. The surface of the bath is covered thin layer enamel that repels dirt. The bathroom is easy to clean. Suitable for almost any detergents. Enamel retains a noble luster for a long time.
Affordable price. Cast iron bathtubs are relatively inexpensive - from 12,000 rubles. But you can find exclusive copies for 350-400 thousand rubles.

Disadvantages of cast iron bathtubs:

Difficulties with transportation, installation and dismantling due to the large weight and large dimensions of the bath.
Limited number of molds due to the peculiarities of cast iron casting technology.
Risk of damage to the enamel of the bath due to impact with a heavy object.
Warming up the metal when water is added to the bath takes a certain time.

A cast-iron bathtub is not a suitable option for old houses with weak ceilings. They may not be able to support the weight of the font, the water filled into it, and the person.

Features of choosing a bath

The main parameters to consider when buying a cast iron bath are the size, as well as the quality of the coating and casting. Let's consider them in detail.

Bath size

The dimensions of the bath should correspond to the size of the bathroom and the needs of family members. First of all, it is necessary to measure the room, determine where the font will stand, and accurately calculate the area available for its placement. Selection Recommendations:

A sitz bath, 70 cm wide and 120 to 140 cm long, is suitable if the bathroom is very small. It is convenient to use it as a shower tray. In addition, in such a container you can bathe children. The main advantage of a sitz bath is freeing up space to accommodate other items.
Standard medium-sized fonts (150x70, 160x70) are optimal for most typical apartments. Their filling capacity is 160-175 liters. This volume is sufficient for comfortable procedures for a person of average build.
The increased dimensions (170x70, 170x75) of bathtubs require more free space. They will be comfortable for a person with a large build.
Large bathtubs (more than 180x80) can be installed in spacious rooms with solid ceilings, since the weight of such containers exceeds 150 kg.

In addition to ordinary fonts, cast-iron corner baths are produced, the sizes of which vary from 90 to 200 cm. Their sides can be equal or asymmetrical. At first glance, it seems that such a bath helps save space. But it occupies almost the same area as a rectangular one. The "bonus" is the release of one of the corners of the room.

Bath coating and casting

The quality of the coating and casting directly affects the life of the cast iron bath, as well as the ability to keep it clean. Main nuances:

The surface should be smooth without bumps and depressions. Worth a look outside. Its smoothness speaks of the high quality of the casting.
Conscientious manufacturers cover the outer walls with powder enamel. This is necessary to protect the cast iron from deformation. On the outside there should be no chips, scratches, cracks.
Signs of high-quality enamel are smoothness, gloss, uniform color, thickness from 0.8 to 1.2 mm. Bumps, bulges, roughness, waves are defects, such problem areas quickly corrode.
If there are children and elderly people in the house, it is better that additional coatings with anti-slip and antibacterial effects be applied to the enamel.

Other criteria

Other bath selection criteria:

A solid cast iron bathtub can last for decades. It is inexpensive, retains heat for a long time, absorbs noise and is easy to clean. But, when deciding to buy a font made of this durable material, it is necessary to take into account its large weight, especially if housing is located in an apartment building.

Cast iron plumbing had no competitors until a certain time. Because this material has high rates strength and reliability. The only thing that can confuse the buyer is the weight of the cast-iron bath.

There are a few things to consider before purchasing. For example, the shape and size of the product. However, the main factor influencing the choice is weight. After all, the convenience of transportation and installation depends on it.

In Soviet times, a cast-iron bathtub was very popular. The typical dimensions of the product at that time were 150x70 cm and 170x70. The weight of Soviet cast-iron bathtubs was their main disadvantage. At the moment, this figure is much less, which is associated with modern manufacturing technology.

Classification

Consider the classification of Soviet cast iron products based on the values of width and length.

Model 140x70 cm is most often installed in small rooms. The maximum weight of such a bath is 80 kilograms, and the capacity is 150 liters. However, this option is not suitable for an adult who wants to enjoy lying in warm water. After all, here you can only take a sitting position.

The following model is suitable for a standard room. The weight of a cast-iron bath 150x70 is 95 kilograms.

Rarely enough there are products with dimensions of 160x70 cm. To take a bath, it is enough to collect about 170 of water. In this case, the mass is equal to 100 kilograms.

More modern layout the bathroom requires the installation of an elongated structure. That is why a product with dimensions of 170x70 cm is ideal for such a room. And what is the weight of a cast-iron bath 170 cm? This parameter is 119 kilograms, and the capacity is up to 180 liters.

By custom order often produce large-sized bathtubs. The size of this design is 200x70 cm. This model is only suitable for large areas.

If we compare Soviet baths with modern products, then their mass has become much less. For example, the weight of a cast-iron bathtub 150 cm of domestic production is 20 kilograms more than that of modern model. However, weight reduction is most often associated with savings on materials. This leads to a decrease in heat capacity and strength.

Modifications

There are several basic modifications of Soviet fonts. For example, corner structures produced only on large enterprises. After all, manufacturing requires additional capacities.

On special legs, oval fonts are most often made. Such models are not adjacent to the wall.

The standard option is a rectangular bathroom with typical dimensions. It has rounded corners inside the bowl and high stability.

Peculiarities

Soviet products, in addition to dimensions, have Additional features. Particularly the coverage. After all, the quality of enamel affects the duration of operation and appearance during this period. Standard thickness enamel coating considered one millimeter. In addition, the inner side of the product is absolutely smooth, without cracks and chips.

Robust design has the right geometric shape. Also, there are no jagged edges, corners and bends. Safe operation provided by the installation of special armrests and handles. In addition, additional treatment of the bathroom with a special solution prevents corrosion.

The choice of colors is rather modest. Only now there are technologies that allow to realize any idea. During the Soviet period, the white model was the most common option.

What material is better?

In Soviet times, cast iron was a popular material for the production of bathtubs. However, now they are made from various raw materials. In addition to cast iron, steel and acrylic are used. Each option has positive and negative sides. For example, steel is a fairly ductile material, which makes it possible to manufacture a bathtub of any configuration. The surface of cast iron is often porous, which leads to the accumulation of dirt and rust. This disadvantage is absent in steel models.

The weight of a cast-iron bathtub is much greater than that of a steel bathtub, so it can be installed alone. However, due to the small mass, the structure is unstable and needs to be supported. The last one is usually the wall. Unlike a cast iron bath, this model quickly heats up and cools down.

The acrylic font is made of plastic synthetic material. Such raw materials are absolutely safe and hygienic. However, acrylic construction is often not rigid enough. This indicator is regulated by the number of reinforcing layers. Therefore, to evenly distribute the loads, the bottom and sides of the bath are additionally reinforced.

The advantage of this model is the ability to maintain temperature long time. For example, a cast iron bath cools down by one degree after five minutes. While in an acrylic bathroom, such changes occur only after half an hour.

At the same time, the acrylic font is easily damaged. Experts do not recommend using various chemicals to clean the product. It's better to prioritize special means, which are designed specifically for such surfaces. By the way, small defects can be eliminated by polishing. Tools for this procedure are sold in hardware stores.

Manufacturers

Relatively recently, specialized departments could not surprise with a wide range. At that time there were two manufacturers. Moreover, domestic and imported manufacturers differed not only in cost.

The weight of a Soviet-made cast-iron bathtub 170 cm exceeds its foreign counterpart by almost twenty-five kilograms. However, this is not a significant disadvantage. After all, such a difference is due to a decrease in quality and thermal conductivity.

In addition, the depth of imported models is only thirty-five centimeters. This is often not enough for the average person.

Domestic products have greater strength, but the choice of bath shape is small. Whether business foreign. The variety of design solutions, additional accessories and coatings is amazing and significantly increases the cost of construction.

Advantages

Soviet cast-iron bathtubs have a number of advantages. In particular, the font is quite easy to care for. At the same time, the coating retains its original appearance for a long time. It is permissible to use household chemicals and temperature fluctuations.

Manufacturers always give a long-term guarantee for such a bath. It can be operated for 25 years. The significant weight of the cast iron bath 170x70 eliminates most of the vibrations. For a person, they are almost invisible, but they have negative impact for joint tightness.

disadvantages

The large mass of the structure is its main disadvantage. For example, the weight of a 150x70 cast iron bath can be more than 100 kilograms. This creates certain difficulties during transportation. Therefore, you will have to use the services of several assistants, which leads to additional costs.

The disadvantages of such a product include an insufficient variety of forms. Pig-iron fonts are made rectangular or oval. This is due to the laborious casting process. Relatively recently, structures have appeared that have an angular configuration. However, the cost of this option is quite high.

Installation

Installation should begin with the placement of the bath in the room. It must be turned over in advance in order to secure the parts of the legs. To do this, you will need brackets and a set of tools. Next, the siphon and drain system are installed. In this case, the structure should be located at a certain slope to the drain hole. You can adjust its position using the support part and the building level.

The points of contact between the structure and the wall should be treated with a special protective composition. This must be done to ensure the tightness of the joints. Do not forget about the installation of a water shutter mechanism. After that, you can proceed to fixing the outlet pipe.

In addition, grounding must be provided. After all, cast iron is a conductor of electricity. Before use, it is better to fill the bathtub with several liters. cold water. Only after that you can fully enjoy the water procedures.

Conclusion

For some, the weight of a cast-iron bathroom 170x70 can be an advantage, for someone a serious drawback. It all depends on the preferences and wishes of users. Therefore, it is worth considering some details in advance, because the bath is most often used for more than a dozen years.

fb.ru

Pros and cons of cast iron bathtubs

Consider the main advantages of cast iron baths:

High strength and durability;
The weight of a cast-iron bath compared to other baths practically eliminates vibrations, which may be imperceptible to a person, but can break the tightness of the joints of the bath and walls, which leads to moisture penetration and the development of mold and fungus;
Cast iron is able to maintain water temperature longer than steel, but not as long as acrylic.
In addition, there is no noise from the falling water jet when filling the bath, which is typical for steel baths;
Simplicity and ease of care. Cast iron bath enamel is of high quality, which allows it to withstand high temperatures and household chemicals;
The service life of a cast iron bath is almost unlimited, various manufacturers provide a guarantee for their products, ranging from 3 years to 25.

Important: the actual service life of a good cast-iron bath usually reaches 25 years or more.

The main disadvantage that a cast-iron bathtub has is weight, which is not only an advantage. The weight of such a bath can be 120 kg or more, which makes it necessary to pay for the services of movers during its transportation.

Useful: As an example, a cast iron bathtub can be compared with an acrylic bathtub: the weight of cast iron bathtubs ranges between 80 and 150 kilograms, while acrylic bathtubs weigh on average only about 30 kilograms.

In addition, the attractiveness of cast iron bathtubs is reduced by the small variety of sizes and shapes available in the range.

Dimensions of cast iron bathtubs

There are several standard sizes of cast iron bathtubs:

The length of the bath can be 120, 150 or 170 centimeters;
The width is most often 70 or 75 cm.

Other characteristics that a cast iron bath has may also depend on the size: how much it weighs, wall thickness, etc.

Important: European bath height standards are 40-42 cm without legs, for deeper models - 40-46 cm.

Bathtub with handles

Apart from classical form there are also cast-iron figured bathtubs equipped with special handles to increase comfort. To increase safety, special anti-slip notches can also be made at the bottom of such baths.

The modern market offers a wide range of cast-iron baths of various classes and prices. For example, a cast-iron bath of a higher class - the weight may be the same as the weight of a cheaper counterpart, but higher quality enamel is used for coating, which will retain its original appearance for many years.

Useful: there is also big choice Chinese fakes for models of European manufacturers at lower prices.

Purchasing a cast iron bath

In order to facilitate the selection, installation and use of the bath, you should decide on a number of questions:

The required size of the bath (taking into account personal wishes and dimensions of the room);
In case of replacement - what was the weight of the old cast-iron bath;
What form of bath is required;
The amount that can be spent on buying a new bath.

After that, you can go to a plumbing store or place an order in an online store, often offering a wider range of plumbing fixtures of similar quality.

In addition, having chosen a model, it is not necessary to go shopping and look for it in stock - just call and decide where exactly the bath will be bought without leaving your home.

Having chosen a model, it is recommended to clarify its various characteristics, as well as clarify the delivery conditions of the purchased bath, which has a rather large weight. At the same time, it is also advisable to find out whether it is possible to take out the existing one, also taking into account the considerable weight of the old cast-iron bath.

openfile.com

Cast iron bath USSR

old baths of the USSR
production until the 70s-80s weighed about 200 kg
those that are later already lightened - about 100 kg.

How much does a cast-iron bath 150x70 USSR weigh?
HF, VChM (modernized) and VChM1 (modernized with a mixer) the weight of the cast-iron bath 150x70 cm was 102 kg,
deviation from the norm was no more than 4 kg.
VChMO (modernized lightweight) and VChMO1 (modernized lightweight with a mixer), already weighed - 98 kg with the same 150x70.

How much does a cast-iron bathtub 170x75 weigh
for example - Cast-iron bathtub 170 × 75 Universal Nostalgie without handles manufacturer OJSC Plant Universal (Novokuznetsk, Russia) bathtub weight 110.5 kg

How much does a cast-iron bath 170x75 USSR weigh?
HF, VChM (modernized) and VChM1 (modernized with a mixer) sized 170x75 weighed 118 kg. Deviation up to 5 kg.
VChMO (modified lightweight) and VChMO1 (modified lightweight with on-board mixer) - 117 kg. Deviations 5 kg.

How much does a cast-iron bath 180x75 USSR weigh?
With a bath length of 180 cm, the weight should have been in the region of 125 kg. Tolerance 5 kg.

How much does a cast-iron bath 120x70 USSR weigh?
Sitting baths with a length of 120 cm and a width of 70 cm weighed 90 kg (error tolerance no more than 3.5 kg).

For example
Pig-iron bathtub 150 × 70 Universal Classic manufacturer JSC "Zavod Universal" (Novokuznetsk, Russia) bathtub weight 92 kg

all-weigh.com

What nuances should be taken into account

Typical designs in the size of 150 × 70 during the Soviet Union weighed about 100-120 kilograms. Currently, such products are produced not only in our country, but also abroad. Such analogues weigh much less. How much does a 170x70 cast iron bath weigh? The difference between domestic and imported developments can reach up to 20 kilograms.

But manufacturers from foreign countries often try to save on material. Including, on its characteristics such as thermal conductivity and strength, overall quality.

The dimensions of bathtubs made in foreign countries are often smaller than we would like. For example, a depth of 35-37 centimeters is often found. For average people, this space is clearly not enough.

Novokuznetsk produces models that have the same weight as in Soviet times. And the depth reaches 45 cm.

Each manufacturer develops its own range. Take Jacob, for example.

REPOSE2915-00: holds 119 liters of liquid, weighs 139 kilograms, measures 170x80;
PARALLELE2948-00: holds liquid up to 82 liters, weighs 18 kilograms less, dimensions: 170×70;
MELANIEE: designed for the same 82 liters. Weighs 90 kilograms, dimensions: 170 × 70.