What is the weight of a steel bath and why do you need to know its mass? cast iron bath weight

If you remember the old Soviet cast iron bathtubs ah, then their weight reached 200 kg.

Now that we have something to compare with, let's find out how much a modern bathtub weighs.

Modern cast iron bathtubs greatly relieved. So, a bath with a capacity of 170 liters of water weighs from 85 to 120 kg.

A steel bath of about the same volume (160-170 l) will weigh half as much. The weight of the steel bath is less than 60 kg.

The lightest bathtub is an acrylic bathtub. Its weight does not exceed 25 kg.

Baths from natural stone- marble, granite A marble bath with dimensions of 190x95x70 cm has a weight of at least 700 kg. BUT granite bath, even a few smaller ones, will weigh no less than 1000 kg.

The weight and price of natural stone bathtubs may seem prohibitive. The exit will be a bath of cast marble. This material outwardly very much resembles natural marble, a bathroom made of cast marble weighs from 70 to 100 kg.

What determines the weight of the bath?

Of course, in the first place, the weight is affected by the material from which the product is made. But there are other factors as well.

In second place is the size of the bath.

So than smaller size baths, the easier it is. There are baths in which it is impossible to lie down, because they are up to 100 cm long. Accordingly, the weight of such a bath will be much less than its counterparts.

Slightly affects how much the bathtub weighs the thickness of its walls. Although, it's also relative. If the bath is steel, then the difference in thickness of 3 mm is not noticeable. In the case of a cast-iron bath, the weight is noticeably added. Thus, in order to correctly answer the question “how much does a bathtub cost”, you need to make several clarifications in the question itself - what is the bathtub made of and what size is it.

If, not to take marble into account, then if necessary, calculate the load of vehicles, you need to lay the weight of the bath within 100 kilograms.

Many people ask how much cast iron bathtubs weigh. And how much does this figure affect operation under normal conditions?

Even in the Soviet Union, nothing was available to the ordinary buyer, except for cast iron products in the sense of plumbing. And in our time, this material does not lose its relevance, but it remains in demand for a narrow circle of buyers who have special requirements for the objects around them. The durability and strength of this material has long been known to everyone. It remains to answer the question: how much does a cast-iron bath 150 × 70 weigh?

Many buyers find cast iron bathtubs to be heavy. And for many, this becomes a serious drawback, a reason to think. When choosing plumbing, many factors matter, and the weight indicator was no exception. Cast iron can be shaped into any shape, but it can be so heavy that it can be difficult to transport.

cast iron bath weight

Typical designs in the size of 150×70 at times Soviet Union weighed about 100-120 kilograms. Currently, such products are produced not only in our country, but also abroad. Such analogues weigh much less. How much does a 170x70 cast iron bath weigh? The difference between domestic and imported developments can reach up to 20 kilograms.

But manufacturers from foreign countries often try to save on material. Including, on its characteristics such as thermal conductivity and strength, overall quality.

Dimensions of bathtubs made in foreign countries are often smaller than desired. For example, a depth of 35-37 centimeters is often found. For average people, this space is clearly not enough.

Novokuznetsk produces models that have the same weight as in Soviet times. And the depth reaches 45 cm.

Each manufacturer develops its own the lineup. Take Jacob, for example.

• REPOSE2915-00: holds 119 liters of liquid, weighs 139 kilograms, measures 170x80;
• PARALLELE2948-00: holds liquid up to 82 liters, weighs 18 kilograms less, dimensions: 170×70;
• MELANIEE: designed for the same 82 liters. Weighs 90 kilograms, dimensions: 170 × 70.

Are there other important indicators

The bath always affects the materials it comes into contact with. Overloading is not only related to the own weight of the structure. We must also take into account the person who is inside along with the water.

cast iron bath weight

For example, we take a bath weighing up to 100 kilograms. The water in it weighs half of this figure. Inside is a person weighing up to 100 kilograms. The weight of the cast-iron bath in this case will reach 700 kilograms.

We take into account the area of ​​1.1 meters squared. The support area is slightly larger - almost 2 meters. It turns out that for one square meter pressure is about 320 kilograms. If the overlap is concrete, then this value can be called acceptable.

150-200 kilograms - the weight that wooden-based structures can withstand. A cast iron bath can also be placed on a tree, but additional reinforcement is required. Many manufacturers have learned to make bathtubs that are much lighter, while at the same time possessing sufficient strength. The wall thickness is at the level of 1 centimeter, but the heat capacity remains at a normal level.

The most common shape is a rectangle. It is clear that in this regard, cast iron does not give a very wide scope for imagination and the implementation of design ideas. But you can choose any color scheme, accessories set.

From time to time, an update requires the coating of such bathtubs, created from enamel. During operation, chips and cracks inevitably appear on the working surface. When purchasing a bathtub in a store, it is necessary to separately monitor the absence of chips and smudges on the material, places where there is too much color, or it is too bright.

Cast iron - about the disadvantages and advantages

What are the benefits of such products? There are only a few of them.

1. Lightweight and easy care. Enameled coating initially maintains a high level of quality. Therefore, even household chemicals, temperature changes do not harm the coating.
2. Manufacturers always give a guarantee for any products. It can be in the range of 3-25 years.
3. Water does not make noise during typing, which often affects steel products.
4. Water stays warm longer in cast iron than inside steel. But acrylic in this case is the clear leader.
5. Due to the serious weight, most of the vibrations that can appear during operation are eliminated. For a person, they are almost imperceptible, but this is what often becomes the reason why the tightness at the joints is broken.

Cast iron bathtubs can actually last up to 25 years or more.

Still, it is the weight indicator that can become not only an advantage, but also a disadvantage. The design can weigh more than 100 kilograms. Because of this, transportation becomes much more difficult, and loaders have to be paid more.

Acrylic bathtubs can weigh a maximum of 30 kilograms, while cast iron can weigh between 80 and 150 kilograms. In addition, specialty stores do not offer as many shapes and colors as we would like.

What is the weight of a cast iron bath

Learn more about sizes

• 170, 150, 120 cm - the most common length indicators;
• as for the width, it is in the range of 70-75 cm;

Cast iron bath has a whole range of characteristics, which may depend on the size. In particular, we are talking about wall thickness, weight, and so on.

There are standards in Europe for height. Deeper models should have a height of 40-46 cm, standard excluding legs - 40-42.

Some more features

There is not only the classic version. You can purchase models in which the design is equipped with additional handles for increased convenience. In addition, there are models with special floor mats to prevent customers from slipping.

Issued different models cast iron bathtubs both in class and in cost. At the same time, the materials remain the same, the same can be appearance. But, for example, in higher-end designs, a better enamel coating is used. It is able to maintain its appearance for many years.

In China, the production of fakes for models from Europe has been launched. They have lower prices.

What you need to know when buying cast iron bathtubs

It is necessary to take into account a number of nuances in order to make the right choice.

1. What size bath should be? It is important to take into account not only the dimensions of the room, but also the personal wishes of the buyers.
2. If new bath purchased as an alternative to the old one - you need to remember what the weight of the old model was.
3. What form is needed in this case.
4. What are the financial possibilities.

It should be borne in mind that in online stores the choice can be much larger than in conventional stores. Online stores are also convenient because you do not have to spend a lot of time visiting real sales offices to place an order - just contact the managers by phone.

cast iron bath weight

Only when choosing it is recommended to specify as many characteristics as possible. Separately, it is worth asking about the conditions under which delivery is carried out. If there is an old bathroom, you need to ask if the store employee can take out the old model.

How to install

This process consists of several main steps:

1. The bath must be brought into the room before installation begins.
2. With the help of brackets, the parts of the legs are attached, you will also need a set with bolts. The main thing is to turn the bath over in advance so that the lower part is at the top.
3. Siphon and drain-overflow structures - installation of fittings is carried out at the next stage. There should be an inlet in the bottom hole. At the lower end of the tee, it is necessary to screw in a disassembled pipe. It is then inserted into the socket at the siphon.
4. lean towards drain hole the bath itself is optional. But you need to use a level to correctly calculate the levels for the slope. To drain most efficiently, you can adjust the part where the support is located. In addition, this will help make the bath itself more stable.
5. It is necessary to treat with special sealants the places where the bath is adjacent to the wall. The main thing is that it fits as tightly as possible to the wall.
6. After that, parts of the sewer and spillway fittings are connected together. A water shutter mechanism is installed on the outlet valve. It is to this part that we then attach the outlet pipe.

It is important to pay special attention to grounding. To do this, one end of the wire is connected to a special spout located on the surface of the housing, and the other to a PE bus or to a potential equalization system. At the last stage, it is necessary that the bath is filled with water. This will allow you to check how strong the connections turned out to be. Then you can remove the drain plug and inspect each joint.

Before the operation process begins, it is advised to fill the structure with 5-7 liters with cold water and then lower them. And only after that you can go to hot water normally.

Cast iron bath in the interior of the bathroom

Enamel chips and cracks on the surface are unacceptable. Fasteners, legs and the bath itself - required elements in any set. Before paying, you must definitely check how complete the package was sent. For some, the large weight of cast-iron bathtubs can be an advantage, but for someone, a serious disadvantage. It all depends on the specific wishes, preferences and requirements of each buyer. If you do not take them into account in advance, then you can face serious troubles. After all, it is very difficult to replace a bath, it is bought for at least a few years for sure.

Of course, this issue can also be resolved, but then it cannot be avoided. additional costs. It is better to take into account all the factors in advance, then there will definitely not be any questions and problems. And the bathroom will delight customers for a very long time. Sellers are always happy to consult and talk about the features of a particular product in order to facilitate the choice of their customers. They are ready to offer further Maintenance if necessary.

The fact that there are not only cast-iron baths, in former Soviet times, many did not even know. Occasionally there were thin-walled steel ones, which, when filled with water, rang deafeningly, like bath basins. Such products were considered inferior and, if possible, were replaced by a classic cast-iron rectangular bath, of which there were two main types that differed in length: 150 and 170 cm. enough.

Difficult past

It is difficult to establish how much a cast-iron bath from the times of socialism weighs - the exact figure has changed over time. They gradually became lighter due to technological progress and the struggle to save materials from time to time. It is known that in the 80s cast iron bathtub 170 cm long weighed 168 kg, but this weight was not a record.

And today you can encounter a situation where, in the course of replacing obsolete plumbing, they collectively fight against such a monster: only 4-6 adult men manage to take it out from the upper floors and load it for removal. When looking at such a scene, the thought arises: how is the situation with such products today, is it not too problematic to equip a modern bathroom with a cast-iron water treatment tank? After all, it needs to be brought, raised to the floor, installed. Will its mass outweigh the traditional advantages of such a bath - durability, reliability, thermal comfort during long relaxing procedures?

Table of measures and weights

Practice shows that the opinion about the widespread transition to lighter steel and plastic spectacular acrylic is wrong. buy cast iron bathtubs continue in sufficient quantities, and not only lighter imports. Siberian and Kaluga producers continue domestic traditions, but at a higher technological level. Their products deservedly enjoy in great demand and is considered the best offer in its market segment, taking into account the "price - quality" ratio.

Weight of imported analogies much less, so to understand how much a cast-iron bathtub weighs different size, data of Russian products should be given:

• 120 x 70 cm - 77 (±4) kg
• 150 x 70 cm - 92 kg
• 150 x 75 cm - 94 kg
• 170 x 70 cm - 110.5 kg
• 170 x 75 cm - 115 kg

European and Asian manufacturers are accustomed to the economical consumption of metal, so their baths are thinner and weigh an average of 20 kg less. Although under European brands there are exclusive objects larger than 200 cm and weighing up to 140 kg.

What problems seem real when choosing a cast-iron bath as a container for relaxing in water?

• High transportation costs.
• Difficulties in climbing to the desired floor.
• Problem secure installation in place.

Let's try to consider these questions in order.

Will the cover hold up?

The first thing that seems especially important when analyzing this issue is whether special events on strengthening floors when installing a cast-iron bath? How many additional supports should be brought under the longitudinal crossbars? Such reflections are especially relevant for amateur builders who build a house with wooden floors without professional calculations of a specialist designer.

How much does a container filled with water weigh with a person? Maximum value- about 700 kg. After calculating the point load on the floor, an approximate figure of 320 kg per 1 m2 is obtained. Such a value is quite acceptable for reinforced concrete monolithic and prefabricated floors with a sufficient margin of safety.

In the case of frame-type ceilings made of wooden load-bearing elements, reinforcement should be considered. Typically, such activities are carried out in conjunction with the waterproofing work necessary for the equipment of the bathroom.

Loading, unloading, delivery

Knowledgeable people who sell and deliver bathtubs claim that cast iron bathtubs are heavier compared to steel and acrylic do not create insurmountable problems during transportation.

Of course, if you don't get around on their own, do not avoid the cost of movers. On average, it costs 100 rubles for the lift, in case of its absence - 100 rubles for each floor. But only a couple of people of average physical capabilities cope with this.

Reliable installation

Manufacturers of cast iron products provide a complete set of legs and fastening systems for reliable installation of plumbing. Uniform parts allow you to easily approve the bath in place.

Further, the solid weight of the cast iron product turns into one of the advantages. The tub stands securely, without bending or moving. Accept water procedures a person of the most impressive complexion can do it without loss of stability and balance. Such problems can become a serious inconvenience if you use lighter specimens made of steel or plastic, especially low-quality ones.

Rectangular cast iron bathtub due to high weight does not move away from the wall, which contributes to the preservation of the waterproofing of the junctions, preventing unnecessary leaks.

Not a problem

The heavy weight of cast iron cannot be an obstacle when choosing the right set of bathroom equipment. You should pay more attention to other qualities of the product: size, design, properties of the enamel coating, etc.

One of the parameters of a cast iron bath is its weight.

A little lower we will consider the dimensions of bathtubs and their weights, as well as the weight of imported and domestic products.

Pros and cons of weight

pros

In some cases, the large weight of the bath can be a plus:

• A cast iron bathtub is very stable and does not require an additional frame like an acrylic bathtub. It is the weight of the bath that gives it this quality.
• Cast iron cannot be thin, so the weight of the bath is large, but this gives the bath such qualities as the absence of vibrations and noise reduction, so the bath does not rattle from the water, as is the case with a steel bath, and the joints in it do not become loose.

Minuses

But sometimes weight can be a minus:

• The main disadvantage of weight is the transportation and installation of the bath. However, this is done once and in the next 10-25 years you will not even think about it.
• The bathtub cannot be installed on wooden floors in a private house, at least without additional reinforcement. But again, the problem is solved, or if the bath is installed in the apartment - it is not significant at all.

Cast iron bathtub Roca Newcast 170×85

Bath dimensions and weights

The approximate ratio of the size and weight of cast iron baths can be described by the following table:

The weight of a typical old Soviet bath measuring 150x70 cm is approximately 94 kg, 170x70 cm - 114 kg.

Foreign manufacturers

Consider the weight of foreign manufacturers on the example of Jacob Delafon and Roca:

Jacob Delafon

Soissons Model:

• 1500x700 mm / 88.1 kg;
• 1600x700 mm / 90 kg;
• 1700x700 mm / 99.2 kg.

Model Repos:

• 1700x800 mm / 117.8 kg;
• 1800×850 mm / 134.5 kg.

Roca

Haiti Model:

• 1500x800 mm / 79 kg;
• 1700×800 mm / 86 kg.

Model Continental:

• 1500x700 mm / 73 kg;
• 1700×700 mm / 78 kg.

domestic producers

Plant "Universal", Novokuznetsk

The weight of the smallest bathtub of this manufacturer (Caprice) measuring 120x70 cm is 69 kg.

Nostalgia Model:

• 1500×700 mm / 94 kg;
• 1700×750 mm / 114 kg.

JSC "Kirovskiy Zavod"

Model Prestige:

• 1500×700 mm / 90 kg;
• 1700×750 mm / 99 kg.

As you can see, the weight of bathtubs of the same size 150x70 cm varies from 73 kg (Roca Continental) to 94 kg (Nostalgia of the Novokuznetsk plant "Universal")

You will probably be interested in knowing the sizes of corner baths or the sizes of cast iron baths.

Cast iron bathtub with legs Jacob Delafon Cleo 175×80 cm

Conclusion

The weight of a cast-iron bath is not such a big problem, which, however, is solved quite simply, but it also has undeniable advantages. However, the choice is yours, especially since at the moment it is simply huge!

Quick answer: depends on the size of the tub itself.

It is believed that cast-iron bathtubs are something from the Soviet past, when the average consumer had no real choice. Today, most buyers prefer to purchase bathtubs from other materials - less heavy and much cheaper.

However, this should not be surprising, because such a bathroom has a number of advantages.

• Firstly, it is the durability and phenomenal strength of this bathroom item.

• Secondly, the service life of such a bath is virtually unlimited and it all depends on how you take care of it.

• Thirdly, cast iron maintains the water temperature at the same level for a long time, preventing it from cooling down.

There are only two disadvantages: high cost and weight. Let's talk about the second parameter in a little more detail.

As an example, consider the most popular versions of cast iron bathtubs and find out how much they weigh. The first digits are the length/width, the second digits are the weight.

• 150×70 cm: 80-90 kg.

• 160×70 cm: 85-95 kg.

• 170×70 cm: 95-110 kg.

• 150×75 cm: 90-100 kg.

• 160×75 cm: 95-105 kg.

• 170×75 cm: 110-125 kg.

• 150×80 cm: 100-110 kg.

• 160×80 cm: 105-115 kg.

• 170×80 cm: 125-140 kg.

These are approximate data, since the final weight depends directly on the model of the bath that you mean.

How much can a cast-iron bathtub weigh and its design features



Home >>> Headings >>> Plumbing >>> How much does a USSR cast-iron bathtub weigh? Cast iron bath USSR old baths of the USSR production until the 70s-80s weighed about 200 kg those that are later already lightened - about 100 kg. How much does a cast-iron bath 150x70 USSR weigh? HF, VChM (modernized) and VChM1 (modernized with a mixer) the weight of the cast-iron bath 150x70 cm was 102 kg, deviation from the norm was no more than 4 kg. VChMO (modernized lightweight) and VChMO1 (modernized lightweight with a mixer), already weighed - 98 kg with the same 150x70. How much does a cast-iron bathtub 170x75 weigh for example - Cast iron bathtub 170 × 75 Universal Nostalgie without handles manufacturer JSC Plant Universal (Novokuznetsk, Russia) bathtub weight 110.5 kg How much does a cast-iron bath 170x75 USSR weigh? HF, VChM (modernized) and VChM1 (modernized with a mixer) sized 170x75 weighed 118 kg. Deviation up to 5 kg. VChMO (modified lightweight) and VChMO1 (modified lightweight with on-board mixer) - 117 kg. Deviations 5 kg. How much does a cast-iron bath 180x75 USSR weigh? With a bath length of 180 cm, the weight should have been in the region of 125 kg. Tolerance 5 kg. How much does a cast-iron bath 120x70 USSR weigh? Sitting baths with a length of 120 cm and a width of 70 cm weighed 90 kg (error tolerance no more than 3.5 kg). for example Pig-iron bathtub 150 × 70 Universal Classic manufacturer JSC "Zavod Universal" (Novokuznetsk, Russia) bathtub weight 92 kg

Someone in the apartment or house still has a cast-iron bathtub. Some users are looking for a cast-iron bath for themselves due to its characteristics. Is a cast iron bath really that good? Few people thought about how much such a bathtub weighs before it had to be dismantled or installed. All these nuances will be discussed in the article.

Should I choose a cast iron bath

The answer to this question can only be obtained if we weigh all the pros and cons of such a product. Some manufacturers are still producing cast iron bathtubs, but in most cases they are design solutions. Steel and acrylic bathtubs, but cast iron are not inferior to them in strength a large number positive qualities. Among them it is worth noting:

• significant service life;
• high strength;
• low thermal conductivity;
• accumulative features;
• noise absorption;
• ease of maintenance.

Some cast iron bathtubs have served their owners for a hundred and more years. At the same time, they require little restoration and are able to serve as much or more. It is quite difficult to damage a cast-iron bathtub. This can be done with an enamel bath, but the design itself is highly durable. Steel and acrylic baths are inferior in strength to cast iron baths. They can be damaged by falling heavy objects. And in this case we are talking not only about paintwork. A cast iron bath takes longer to heat up than a steel bath, but it also holds heat longer. This is due to the density of the metal, as well as its thickness in the cast iron bath.

When filling a steel bath, noise is heard not only in the apartment, but also from neighbors above and below. With regard to the cast-iron bath, this disadvantage does not arise, since it perfectly absorbs sound waves. Cast iron bath is resistant to various chemical substances so it is easy to wash and keep clean. The main disadvantage of this design is its weight, which differs depending on the size. The surface of such a bath is quite slippery, so you need to carefully step into it. The shape of such a bath can also be out of date.

Weight and dimensions

The weight of a cast iron bath depends on its size. The maximum length of a modern product is 2 meters and a person with a large height can fit in it. The maximum width can reach 85 cm. But they rarely use such extreme dimensions, so the width can be chosen from 70 cm and the length from 120 cm. The most popular models are containers with a length of 1.5-1.7 meters. This is enough for a person with a height of up to 1.9 meters.

Note! There is a variant of sitz baths, which are less comfortable, but can be used in limited space.

Sometimes such products are used if there is a need to move the bath to accommodate a washing machine or dryer.

The standard weight of a cast-iron bathtub, which was made in the Soviet Union, is 110 kg. The dimensions of this container are 1.5 × 0.7 m. It is very difficult to carry such a structure. The mass of modern products is somewhat different from this standard. But this does not affect the usability and service life. The wall thickness of modern products is approximately 10 cm, which is sufficient for minimal thermal conductivity. If you need to install a smaller bathroom, it is important to know that the weight will be reduced by 10 kg if one of the sides is shorter. The reverse count is also correct. This means that a bath with dimensions of 1.6 x 0.7 meters will weigh approximately 130 kg.

Note! It is worth saying that an acrylic bath of the same dimensions will weigh four times less.

If a product is purchased from cast iron, the manufacturer of which is a foreign company, then you can count on less weight. This is due to the fact that the wall thickness of such products is less. The depth of the structure is also different, which can be only 35 cm. This should be taken into account if you already have the habit of bathing in a standard bath, because its depth is 10 cm more. The problem may be the delivery of the product to the required floor. This is easier to do in those houses where there is a freight elevator. In the usual case, it will have to be raised along the landings, skirting the railing and other obstacles. It will take the help of several people to achieve the result.

What to look for when buying

When buying a cast-iron structure, you need to pay attention to several nuances that will be the key to a long service life of the bath. One of the first things to consider is size. It must be suitable for a particular room. In this case, it is worth making a certain gap, that is, choosing a bath model that will be somewhat smaller than maximum dimensions, which would fit in the planned place. Such a margin will compensate for the unevenness of the walls and corners in the building.

The selected model must be carefully examined from all sides. It is worth paying attention to the color of the enamel and its integrity. If there are yellow spots, then it is better to refuse such a purchase. During transportation, damage may have been caused, which can subsequently cause corrosion of the bath from exposure to moisture. Attention must be paid to the smoothness of the surface. To do this, it is enough to run your hand over it. If there is roughness, then you should look at another model. Roughness can be a sign of the beginning of enamel deterioration or a sign of poor quality production.

Advice! If the plan is to install the bath not against the wall, but in the middle of the room, then the screens will not be used.

It means that Special attention worth paying attention to the bottom with outside construction so that it is free of rust and has a good surface finish.

For greater safety when using, it is better to pay attention to cast iron products, the bottom of which is not smooth, but has ribs or notches. On such a surface, it is more difficult to slip, which means that the likelihood of injury is also lower. There are options for products with handles that are on the sides. Such a supplement will be very useful for the elderly. There are times when two identical models are sold at different prices. It is worth asking the seller what the catch is. Usually it is as a cover. In this case, it is better not to spare money and purchase a product more expensive, because its service life can be 10 times longer than that of a model with a lower price tag.

For some models of baths, you will need to purchase legs. The classic design is triangular shapes, but they are suitable when the floor surface is even. If this is not the case, then it is better to buy legs that are able to change their level. Usually they are hairpins of a certain length with nickels at the ends. There is also design solutions for bath feet. In this case, they can be of any desired shape. What material is best for a bath is described in the video below.

Notable Manufacturers

One of the foreign manufacturers of bathtubs that is in demand is Roca. The company started its journey in Spain and continues to conquer the global community. The advantage of products from this company is a special approach to the manufacture of the bottom, as well as enamel with titanium additives. It has resistance to various kinds of influences. The French bath manufacturer Jacob Delafon also has a good reputation. Their highlight is the great depth and width. Some products have holes for handles and additional modules, such as hydromassage.

If you want to own products from domestic manufacturer, then you should pay attention to the Novokuznetsk plant "Universal". There are about ten different models of bathtubs in the assortment of the plant. The manufacturer of luxury bathtubs can be considered the Portuguese plant Recor. You can find amazing products in the assortment various forms and design. There are bathtubs with semi-antique finishing. The weight of the structures of this manufacturer is approximately 150 kg. As a budget solution, you can consider bathtubs from the manufacturer Aqualux. Production facilities are located in China. At the same time, the quality of the products is quite high level. Bathtubs are standard sizes with a width of up to 70 cm.

Note! The information leaflets indicate the size of the tub, which is taken at the outer edges. The interior space is somewhat smaller.

Bath care

To clean the bath, it is advisable to use household chemicals. However, for a longer service life ideal solution there will be the use of cream formulations in which there is no abrasive. Although good enamel is able to withstand mechanical stress, if you overdo it, you can destroy it. protective layer, and the bath will quickly fail. If rusty streaks appear from the mixer, then they must be removed immediately, because over time they can so eat that it will be impossible to do so. Be sure to look at the composition of the cleaning agent. Usually the manufacturer indicates whether it can be used for an enameled bath.

Summary

As you can see, the popularity of cast-iron bathtubs is not only not falling, but, on the contrary, is growing. This is especially true design projects houses and baths. Only cast-iron bathtubs can be safely placed not against the wall. Due to its weight, it will remain stable and will not tip over when the user enters or exits it. The overflow hole in cast iron bathtubs can be located both on the narrow and on the wide side. Everything will depend on where the mixer will be located.