Intercom visit code to open. The best proven ways to open intercoms from various manufacturers without a key

Everyone faced a situation when you need to get into the entrance, but there is no key to the intercom. There can be a lot of reasons: forgot at home or at work, lost, can't find it in your bag. One of the rarest and most difficult cases - the key stopped working. The situation noticeably worsens if it is night outside. Calling the neighbors' apartment so that they let you into the entrance is not The best way maintain good neighborly relations. We have already written about. Today we will consider what to do if you need open intercom Visit.

Ways to open intercom Visit

Do you know how to open intercom Vizit keyless? To do this, you do not need to have the skills of a cracker or commit illegal acts. Everything is much easier. Initially, at the factory, all intercoms are equipped with a single service code. With its help, installers configure the intercom, turn on desired program. But after all the manipulations, the masters must change the standard service code to a new one invented by them. After changing the code, it will become almost impossible to hack the intercom, however, many installers avoid "unnecessary" actions. They save their time and do not change service codes. And this means that a certain combination of numbers will help you get into your own entrance. But how to determine which characters to enter?

Vizit intercom secret codes

Since the factory produces several models of intercoms, each line has its own secret code. To hack the Vizit intercom, try entering one of the following combinations: " *#423 », « 67#890 », « 12#345 " And " *#4230 ". The peculiarity of intercoms of this brand is that in the codes the symbol * can periodically be replaced by the "C" key. In this case, the code "*#423" will look like this " С#423". Also, the "#" symbol is sometimes replaced by the "K" key. Then the code "*#423" should be dialed as " SK423».

Finding the right combination can take some time. But there is another way to get into the entrance, bypassing protection.

How to open the intercom Visit using the service menu

The instructions below will tell you how to open the intercom visit using the service menu.

To enter the menu itself, enter the combination "# 999".
Two beeps will sound. Then press "1234" and wait for a short beep.
At this stage, you will need to choose the correct password to enter. There are several digital combinations: "3535", "6767", "11639", "9999", "12345".
The final step is to enter the following combination: 2 - a short pause - # - another pause - 3535.

After that, the door will open. You can use any method convenient for you, but if both do not work, then the installer has changed the standard system password, and you will not be able to open the intercom.

This article contains a mini directory containing codes for intercoms. This is a convenient information on codes for intercoms collected in one place. Below is a list of intercoms and codes for them.

Intercom code Barrier II and IIM

Remember, these are such old "Soviet" intercoms with mechanical locks and a flat magnetic key? For 2M, there is a non-replaceable opening code - 1013. But they were rare then, and even more so now. In general, these intercoms were opened with 2 magnets, for example, from a disassembled key. You just carry them around the key pad until they work.

Barrier - 4

The same, only without buttons (single-user, designed for front doors with concierges). The key has 3 magnets.

Intercom Codes VIZIT

General note: If the keyboard does not have * and #, C and K instead. C - * K - #.

Displayless models with LEDs (SM/M/N 100-200):
If standard settings did not change the code * # 4230 or code 12 # 345 lead to the opening of the intercom.
In freshly installed intercoms, codes * # 423 and 67 # 890 are likely

You can enter the service menu:
#940-beep 2 times-(master code, default 1234)-beep 1 time. If the code is not correct, it will beep with a two-tone signal. The master code can be 1234, 6767, 3535, 9409, 12345, 0000, 11639.

Further:
2 + # + 3535 Doorphone opening.
3 - Programming keys for entry. (Attach key + #, wait for squeak + *).
4 - Erasing keys from memory.
* - Exit the mode.
# - Installation confirmation.

For intercom VISIT BVD-3xx (without display and LEDs), (with right-hand or central location of the tablet)
opening the door – press 1 in the menu.
Does not always work in BVD-34x (with a left-hand receiver)
For them it is specified.

Intercom Codes Cyfral

To open the door try:
a) If there are apartments with numbers 100, 200, 300, 400, etc. in the entrance, then you can try to enter the codes:
call (code 1) call (code 2)
where code 1= "round apartment number" (100...900),
code 2= 2323 or 7272 or 7273.

For other models of intercoms (with the letter "M"), the code is suitable:

"B" 41 "B" 1410. Sometimes it helps to just enter 07054.

Intercom CCD-2094.1M (burning or flashing dash on the display) - dial the code B + 0000 or open immediately, or the service menu (the inscription ON) - then press 2. Or, the inscription OFF - then, alas, the quick access mode is turned off.

Intercom Codes Cyfral CCD-2094M

Code 0000 "B" + pause 2 seconds. The inscription "code" appears. We enter the code 123456+"B" or 456940+"B" (rarely 123400+"B"), a pause of 2-4 seconds, the inscription "f0". The menu is open. For a quick opening, just press the code 601.

If we want to come regularly, we can write our key into the memory of the Cyfral intercom. We press the bell and hold until the inscription appears, then enter the code 123456 (or code 123400). Got into service mode. In service mode, press 5, then enter the number of an existing apartment, the intercom will write TOUCH, put the key - it is in memory. (For models with flat optical keys, instead of the apartment number, dial 600, insert the key and press call).

Intercom codes Eltis

As a rule, opening codes:
"B" 100 "B" 7273
or
"B" 100 "B" 2323
But if it does not work, you can try other options from Cyfral.

Intercom codes METAKOM

We press the call, then the number of the first apartment in the entrance, the call again (the “COD” will be displayed), then the code 5702 ... If it doesn’t work, then we try the codes: 65535+ "B" + 1234+ "B" + 8 or or 1234+ "B "+6+"B"+4568.

Only for intercoms MK-20 M/T codes:
"B"+27+"B"+5702
or "B" + 1 + "B" + 4526

And one more thing about MK-20 M/T intercoms: Their firmware does not and will not have protection against master keys. Even without knowing the service - password, if you bring a blank tablet, the intercom will enter the programming mode automatically!

Rainmann intercom codes

For Rainmann 2000 models and those with a dot on the left of the display.

Key button + 9 8 7 6 5 4. A double squeak should be heard. Then we enter the code 1 2 3 4 5 6, the letter "P" will appear. Entered the menu. Further:
4 - Door lock.
6 - Turn off the intercom.
8 - Open the door.

DomoGuard intercom codes

Long press on "C", it will beep.
Then we quickly enter the code: 669900, + call button + number one more than the last apartment in the entrance. The display should show "F-".
Got on the menu.
Open the door - code 080
Remember new key - code 333
Disable door lock - code 071

Intercom Code Blink

The only single-user intercom on the list. It is without a screen, without a keyboard, with a mechanical lock. It is placed in houses with a concierge, so breaking it makes sense only at night. We find false bolts of an unusual shape on the lower section of the panel. These are contacts backup power. When 9 volts are applied to them (and they are just the width of the Krona contacts), the intercom is open.

Intercom code T-Guard

Code “B” + 00000 + “B” B ”(the last two presses - quickly!) - the door is open.

Some general notes on intercom code:
In winter, intercoms with a touch keyboard (DomoGuard, Rainmann) are subject to hypothermia. We take a normal lump of snow, and lean against the keyboard. When the display shows “Err” (10-20 minutes), the intercom will unlock the lock.

On the this moment codes for intercoms are not suitable everywhere. The ideal solution currently serving, it is able to open up to 90% of intercoms.

Now it is practically impossible to meet high-rise buildings, the entrances of which are not closed with steel doors. The only difficulty in using the intercom is the loss, demagnetization of the key. In such a situation, if the neighbors do not answer the call (they are absent, they do not hear), and there is no one at home, a lot of problems arise.

Installation Companies protective systems of this type, are silent about a lot. To the question of apartment residents who do not want to donate money for “modernization” front door how to open an intercom without a key, they answer as standard - purchase at the right amount. Is this true and what to do in case of force majeure?

There is no full guarantee that these tips will help open any intercom without a key, but certain methods sometimes turn out to be effective: checked. Much depends on the features of the locking device scheme, the thickness of the steel sheet, the quality of the door installation, and a number of other factors. But in a critical situation, in the absence of a choice, any methods are good.

El / category. It is enough to bring the source (piezo lighter, stun gun) to the "nest" of applying the key, the automation can work and break the power circuit of the magnetic lock. After that, the door will open easily.
Jerk. Installation of an intercom requires strict adherence to a number of rules. In practice, however, they are not always respected. You can try to press down the steel sheet, and then sharply pull it towards you. Sometimes two or three attempts are enough, and the door will open. Naturally, you will have to apply a fair amount of force, and therefore this way recommended for men only.
Sash strike. You need to beat in the area where the magnet is located. If the device has already partially exhausted its resource, is mounted illiterately, the force of attraction of the web may weaken. Then it will turn out to open the door with a strong jerk. One of the most effective ways to solve the problem is how to open a metacom intercom without a key.

In the absence of a shortage of time, there are other options - call the neighbors (they may not hear the intercom buzzer). As an option, wait until the person leaving the entrance opens the door from the inside (or the one who has the key comes up).

Ways to unlock various systems

*B - call button (key)

For any of the schemes, the role of the “magic key” is played by a certain intercom code, that is, a combination of symbols and numbers. It is different, and depends on the model of the protective system.

Metacom

B + (No. of the first apartment in the entrance) + B. After the letters COD are highlighted, the combination 5702 is dialed.

The lock, if the factory codes of the metacom have not changed, should demagnetize. If that doesn't work, then you should move on to other options.

1234 + B + 6 + B + 4568
B+1+ B+5702
B + 5 + B + 4253
B + 6 + B + 4568
65535 + B + 1234 + B + 8
65535 + B + 7418378
B + 1803
B + 1234567

The following master codes are used to open the intercom Metakom modification MK-20T/M.

B + 27 + B + 5702.
B + 1 + B + 4526

forward

Inexpensive and reliable Forward systems do not differ in the complexity of the scheme; open with several codes:

K+1234
K + 557798 + K
123 + * + 2427101
2427101

Digital

Opening a cyfral intercom without a key is more difficult - there is no single encoding for all models.

For apartment numbers with "round" numbers (100, 200, and so on):

B + No. sq. + B + 2323 (options - 7272, 7273).

For intercom series:

"M" - 07054. If it does not work, then B + 41 + B + 1410
"CCD" (model 2094/1M) - B + 0000.

When the inscription ON is displayed, press the button "2". The appearance of the OFF symbols on the display of the control unit indicates that the intercom has been reprogrammed. In this case, any further combinations are meaningless; the door will not unlock.

"CCD" (Model 2094/M) - 0000 + V

After “COD” appears, buttons 1 to 6 + B are pressed in turn.
The second option is 456999 + B.
The third way is 123400 + V. After highlighting "F0" + 601

Eltis

It is not difficult to open the eltis intercom - this is one of the simplest systems; few options.

B + 100 + B + 2323 or 7273

You can also solve the problem of how to hack the Eltis intercom with the help of the codes that apply to the Digital models. Which ones are suitable is verified by practice; for different eltis series, only one, maximum two combinations are suitable.

Vizit

Intercoms "Visit" are produced in different modifications, but the algorithm of user actions, regardless of the block series, is the same. There are some nuances associated with the absence of some specific buttons, so you have to navigate according to the situation.

* + # + 423
67 + # + 890
12 + # +345
* + # + 4230
"#" + 999. After 2 intermittent signals, four digits are dialed in a row, from 1 to 4. Options for the last combination are 0000, 6767, 12345, 3535, 9999
"2" + short wait + "#" + same + 3535

There are no buttons "#", "*" on separate panels of the control unit. In this case, the combination "C" + "K" is tried

Advice. For models without a display, you can try pressing "1" and then dialing any combination of 4 digits. The probability of electronics triggering is small, but if there is no other way out, it is suitable as an option.

Factorial

Opening the intercom factorial without a key will turn out with several code combinations.

A set of numbers from 1 to 6
Code 000000
"Five". After highlighting "180180", press the buttons B + 4 + B

Marshal

The first thing to do is determine the number of the last apartment in this entrance and add 1 to this number. For example, 20 + 1 = 21.

Techcom

One of the devices, which is very difficult to open with a set of numbers and symbols, without a key. Therefore, it will be needed; suitable from the intercom techcom of any series.

Working with buttons "0", "1", "6". They are simultaneously pressed, then alternately released in the sequence 0 - 6 - 1.
After the signal, code 4321 is entered
B + 3 + B
The key is brought; perhaps he will demagnetize the lock and the door will swing open.

Note

On the steel doors other models of intercoms are also installed - Stroymaster, Kron, Arcades, Secret, Pirs, Komaks: and this is not a complete list of protective systems. Judging by the information on the Web, almost all of them are not amenable to hacking by selecting codes.
On sale "from the trays" there are so-called universal master keys (the same keys with special firmware). They open almost all doors, regardless of the installed electronic system. In addition, they are inexpensive - from 100 to 150 rubles, and therefore the demand for them is high. Plus is obvious - very convenient. But not everyone understands what the systematic use of these keys leads to. The result of such a “service” is the incorrect operation of the intercom, followed by the failure of the control unit. And the repair of its electronic circuit, especially the replacement of the unit, is expensive.

It is better to prepare ahead of time for possible troubles. Therefore, it is worth contacting the intercom service company and finding out the codes for opening. If its employees refuse a verbal request, make a request in electronic (written) form, appealing to the relevant law (POZPP; last edition dated 2017): the consumer has the right to receive all information about the service or product provided.

Each code system can be unlocked by simply entering the desired set of numbers. Home locks are no exception. How to open the intercom "Metakom" without a key? Just like the other - dial a special password. The codes listed in this article work if the installer (or someone from the residents) did not change the system settings of the combination lock or the universal password.

Ways to open the intercom without a key

Any code lock allows you to open the door without a key. Each of the methods presented here is suitable for certain common Metacom models, so if after the first attempt it was not possible to open the door, proceed to the next method. Try all of the above methods - one of them will definitely work. Note: in all combinations, "B" means the call button, regardless of whether it is indicated on the panel with a letter or a handset icon. Here effective ways, which will tell you how to open Metakom intercom models without a key:

With the help of the apartment code. To models of code locks from Metacom, a password is assigned for each apartment number in this house. If you know the code cipher of your apartment, dial it and press the call button.
With a generic code. If the installer or other residents of the house did not change it, then the standard combination "1234-B" should be.
Press the call button and dial the number of the first apartment in the entrance. (Just look for the floor plate to identify it.) If you did everything right, COD should appear on the display. Dial the combination 5702, and after a couple of seconds the door will open.
Dial 65535-B. Enter the universal code and press B-8.
Enter the universal code and the combination B-6-B-4568.

The methods listed above are suitable for combination locks with a screen. If you want to figure out how to open a Metakom intercom without a display, use one of these methods:

enter this code: B-27-B-5702, wait a couple of seconds, and the door will open;
press B and dial the combination 1-B-4526.

How to hack a Metacom intercom

There are special codes that allow you not only to get inside the building without a key, open the door, but also edit the setting of the intercom itself. For example, you can change the passwords used by the system, delete or bind keys to a specific apartment, change the main entrance code, enter programming mode, learn how to open a Metacom intercom without a key in the user menu. For any action, you need to know the so-called "master code". The default password for Metacom is 1234.

Door opening. How to open a Metakom intercom without a key? Find out and enter the universal code, press the call button.
Working with keys You can remove or attach "pills" to a specific apartment. To do this, enter 65535-B-master-code-B-B. Then enter the apartment number. To write down the key, enter B-7. If you want to untie all attached chips from the apartment, press B-7-0-111.
Changing system passwords. Using the menu of intercoms "Metakom" the adjuster can change the universal code of the intercom. To assign a new master password, enter 65535-B-master-code-B-9-3-new password-B. In the same menu, it is possible to change the apartment code. To do this, you need to know the already installed cipher. You are expected to be the owner of the apartment in order to change passwords. Dial the combination 65535B-master code-B-B-apartment number-B-0-new password-B.
Codes for entering the intercom menu. Metacom is equipped with three different catalogs. To enter the standard user menu, enter the combination 65535-B-1234-B-B. Intercom service password: 65535-B-master-code-B. To change Metacom system settings, enter 65535-B- master code -B-9.

How to find out the universal code

Metacom assigns its own password for each apartment in the house - it is a set of four digits. The owners of the apartment are obliged to know it in order to get into the house even without a key or in another emergency. The apartment password is indicated in the agreement with the installer. There are universal codes for intercoms that are not tied to an apartment. By default, the main password for the Metacom intercom is 1234. If someone has already changed it before you, then you can only find out the new password from the service company.

Without knowing the universal access code, you will not be able to:

change it and set a new master password;
attach or detach key chips from the apartment;
change the system settings of the intercom;
assign a new code for the apartment;
to program the code lock.

Without a master code, you can:

open the Metacom intercom without a key;
enter the user menu.

Video instruction: how to open a combination lock

This short video tutorial gives a simple and clear explanation of how to open the door without a key. In the video, the author unlocks the Metakom model with a display. To use this method, you need to know the number of the first apartment in the entrance. It is very easy to find out - on each porch there is a sign with the numbers of apartments belonging to this part of the building. The photo preview shows which intercom model is used. If you have the same combination lock, then the password from the video should be suitable for opening the door without a key.

hard to find modern door in the entrance of a high-rise building, unprotected by an intercom. These devices are easy to use and pay off fairly quickly. Their main function is to provide access inside the house exclusively for residents and their guests. But situations are different, and sometimes it is necessary to open the door, but there is no one to call. How to find out the intercom code and get inside the entrance?

Master key or code?

The easiest way to open a door with an intercom is to use universal key. Similar products are made for a nominal fee by some craftsmen, issue them legally to employees of a number of services. A key that can open any door can be held by ambulance doctors, housing and communal services workers, police officers and representatives of a number of other social professions. In fairness, it should be noted that such keys have a specific shape and are suitable, respectively, only for some models. protective devices. Is there a universal code for the intercom? Unfortunately not, but each manufacturer has its own factory settings. If during installation they were not changed by the wizard, you can try to open the intercom without a key.

Opening Vizit

The most reliable, and therefore the most popular in our country, are Vizit brand devices. Today in many cities you can find at least 8 varieties of intercoms from this manufacturer. They differ significantly appearance. Moreover, in some, in addition to numbers, the symbols “*” and “#” or letters are used. How to find out the intercom code of this brand? Everything is quite simple. For devices that are several years old, you need to use the combination "asterisk-pound" and dial the numbers 4230. Alternative: 12, asterisk-pound, 345. New electronics of this brand should be opened by the first version of the code without zero or the following combination of characters: 67, asterisk- lattice, 890.

Intercoms Eltis and Metakom

The devices of these two brands are almost as common as the "Visit". The easiest way is to open Eltis. You don't need to remember long passwords. We press the call key to the apartment, then dial "100", call again and after that - 7273. If the door does not open, try changing the last digits to 2323. How to find out the Metacom intercom code? It's a little more complicated, but also quite realistic. Option for the lazy: press the call button, enter the number of the first apartment in the entrance, then call again, after which we enter the combination of numbers 5702. Another option: 65535, call, 1234, call, 8. If this code also did not fit, try dialing 1234, call, 6, call, 4568.

How to open the door if you can't pick up the code?

The intercom consists of an intercom, a processor and a magnetic mechanism that blocks the door. Brute force will not help, the magnetic field is too strong and can withstand several tons of pressure. It turns out that it is impossible to open the intercom without a key and code? Engaging in the selection of a combination at random is a thankless task. The standard ten digits and two system buttons offer an almost infinite number of combinations. If you need to get to the entrance quickly, you can try to call any apartment at random. Further, it all depends on your imagination - introduce yourself as a postman, a neighbor or a courier from a second cousin, but there is no guarantee that they will open it for you.

Do not forget that the intercom is an electronic device. If there is a power outage at the entrance, you won’t have to open anything special. Alternative option opening the intercom - try to shock (an ordinary lighter is enough) in the place for the key. Some models open the door after such exposure. If you have access to the device's power supply, you can try disconnecting it from the network, and then reconnecting it. Such a simple manipulation will cause a serious failure in the system and you no longer have to puzzle over how to find out the intercom code. But keep in mind that such actions will lead to serious damage when the device cannot be repaired.