Russian plaster. Textured decorative plasters, materials with increased wear resistance
Decorative multi-layer coating imitating marble or other natural stone. Depending on the method of application and subsequent processing, it makes it possible to obtain various colors and artistic compositions, as well as different levels of gloss: from semi-matt to high gloss.
- for internal works;
- easy to apply;
- can be tinted with highly concentrated tinting paints of our company;
- for decorative finishes walls, ceilings, columns and other interior elements;
- forms a "breathable" coating;
- maintains freezing to -40 °C no more than one month or five cycles of freezing-thawing.
Warranty period of storage is 12 months.
Surface preparation
The surface must be clean, sound and dry. The base is absolutely even, so it must first be puttied with a finely dispersed putty and primed.
tinting
Can be tinted with highly concentrated pastes of our company or painted over.
0.4 kg/m2 depending on the method of application.
Application method
Applied to different kinds plasters, concrete, brick, drywall, fiberboard, chipboard, etc. with a flexible stainless steel trowel. To get high decorative properties coating, it is very important to use a quality tool without chips or nicks. The classic pattern is achieved through the multi-layer application of the material (up to 6 layers) and the use of its various shades. Therefore, it is recommended to prepare several containers with plaster of the required colors before starting work.
The first layer of Venetian decorative plaster is applied with a wide spatula in separate strokes with spaces. Subsequent layers are applied with a spatula of smaller size in separate short asymmetrical strokes with gaps that partially cover the resulting gaps. And so on until the surface is completely covered and the spotting becomes barely perceptible. Before applying the next layer, allow the previous one to dry. Then, carefully cutting off the “combs” from the smear, each layer is carefully leveled and polished with a spatula (iron method). Thus, irregularities are removed and the coating acquires shine. The last layer is polished with cloth, fur, etc. For extra shine, the surface can be coated with a special wax or varnish. Due to the translucency of the plaster layers, the effect of volume and depth is achieved. Other application methods are also possible.
Drying time
To tack - 1 hour,
completely dry after 24 hours under normal conditions.
Storage
In a tightly closed container at a temperature from 0°С to +30°С.
Carry out work with high humidity and temperatures below +7°C.
Price
| № | Name | Price per kg (l), piece | Packing kg(l) | Price per pack. | Consumption kg(l)m2 | Packing consumption. | Price for 1m2 |
|---|---|---|---|---|---|---|---|
| 153 | Venetian plaster (Russia) | 123.69 | 16.00 | 1979 | 2.5 | 40 | 49.48 |
The assortment of plaster offered by hardware stores is very rich. This is due to the invention by manufacturers of new ways to solve wall decoration. Often putty is a dry mixture, which includes substances that determine its variety. Production allows you to achieve the maximum quality of the material and set the necessary properties for it. Thus, the plaster is durable, does not peel off and does not crack from temperature changes.
Of all these materials, decorative plaster is especially popular. In addition to its main functions (surface leveling, insulation), it also performs the function of decorating walls and carries an aesthetic load. With this option, the interior of any house or apartment will turn into a real masterpiece. This contributes huge selection texture solutions and colors offered by manufacturers.
Varieties
Varieties of decorative plaster on the market in Russia:
- Mineral, based on natural minerals (white cement). Characteristic positive features are considered to be increased vapor permeability, fire resistance and low cost. The disadvantages are manifested as a slight adhesion and low, compared with other options, elasticity.
- Polymer, in which acrylic resins and other similar substances are added. This material has a large list good qualities. It is resistant to intense exposure to ultraviolet rays and high temperatures. Also a high level of adhesion, vapor permeability and moisture resistance. The production of this mixture sets itself the task of improving its quality by increasing water-repellent properties.
- Silicone. Expensive option. It is even more versatile and durable. The photo shows options. color solutions rooms made with this material.
Plaster is intended for front and internal works. The market in our country is saturated with foreign and local samples. Production this material in the Russian Federation set the task of increasing the quality of products and making them competitive in the world market. The five well-known manufacturers occupy the most confident position, and are popular with customers. These include:
- BauMit;
- Ceresit;
- Tex Color;
- PERMURO;
- caparol.
Each of the listed manufacturing companies provides a different product. Colors, features and prices of the offered decorative plaster differ from each other. Tex-Color, for example, has the best prices, the texture of the product is called lamb, it is very easy to dye. BauMit specializes in trading varieties of bark beetles and lamb beetles, the quality of the products is high, but the prices are also significant.
Manufacturers of Ceresit and Caparol on this moment leading both in Russia and abroad. All indicators of their goods, except for prices, are high. These German companies achieved their position by providing good products at a relatively low cost. The production set itself the task of creating high-quality putty from ordinary materials, which made it possible to make it accessible to ordinary users.
Decorative plaster firm PERMURO is resistant to wear and different kind mechanical influences. It is mainly used for exterior finish. Unfortunately, it is almost impossible to find it in construction stores because it sells out quickly. At the moment, the task is to increase the supply of putty in order to meet the demand of buyers.
Market features
Masters say that the demand for such a facade finishing material as decorative plaster is increasing quite dynamically in Russia. The reasons for this state of affairs are related to the fact that many knowledgeable and practical people want to minimize gas consumption during the heating season. High-quality putty is not only a beautiful wall decor, but also an excellent insulating material.
Also at the moment, the number of luxury housing is growing in the country. This factor gives the lion's share of the request for this product. Specialists carried out observations of this structure. From them it becomes known that the previous three years have become decisive for manufacturers, their number has increased significantly. This entailed an increase in the number of importers, distributors and intermediaries of this plaster.
Sale of decorative plaster
The main interest in the turnover of such products is demonstrated by cities and regions with a population of about a million (Moscow, Yekaterinburg, Volgograd). Moreover, this material of well-known manufacturers is mainly traditionally used for warming houses. Also, such a product sells well in cities where a large percentage of the population has high earnings.
According to the forecasts of many analysts, the market for these products in Russia will grow significantly every next year. The increase mainly depends on the constant demand for expensive plasters that have an interesting texture and color. Many professional marketers associate these prospects with changes in the consumer culture of citizens. Domestic manufacturers, in order to stay afloat, need to reconsider their pricing policy and increase the quality of decorative plaster.
Do you want to buy decorative plaster in bulk from the manufacturer? Contact the services of the company DESSA-DECOR, which will offer you the maximum profitable terms cooperation.
We produce acrylic decorative plaster on modern equipment using advanced technologies and using only original imported raw materials. The combination of these factors gives us the opportunity to create high-quality products and sell them to customers at an affordable price.
Advantages of decorative plaster
The DESSA-DECOR plant is the leader among Russian manufacturers of decorative plaster. Whole manufacturing process strictly controlled, which makes it possible to obtain products of the highest quality.
Decorative plaster from the DESSA-DECOR factory is different:
Ease of application. The consistency of the plaster is such that even for a non-professional, its application will be simple.
Excellent masking properties. The texture of mosaic decorative plaster allows you to hide minor architectural flaws in the walls on which it is applied. Significant shortcomings will need to be eliminated, but with small cracks and indentations, the finishing material will cope perfectly.
High thermal insulation characteristics . In combination with a quality primer, our decorative plaster creates a reliable thermal insulation layer.
Safety and environmental friendliness. The composition of the plaster does not contain substances that are toxic or unsafe for human health, so it can be used to finish all rooms without exception.
High performance. Decorative plaster from the Dessa Decor plant is resistant to temperature extremes, does not absorb odors and does not require special care.
Thanks to a wide range of decorative plaster DESSA DECOR can be selected for finishing the room in any style and for any purpose.
Ordering plaster from DESSA-DECOR
To order decorative plaster in our company, contact us by phone or leave a request on the website. Always addressing the needs of our customers, we process orders in a short time and guarantee their fast shipment to any place in Russia.
Note! When ordering products worth more than 5000 rubles, you get free shipping!
Buy decorative plaster from the manufacturer - at affordable prices and the highest quality, which is confirmed by certificates.
Decorative plaster wholesale
the best way to purchase materials at the lowest price directly from the manufacturer - follow the link in the header of the site with the text "get a wholesale price". In 2015, we became the fastest growing decorative coatings brand in Russia, and in 2016 we consolidated the result in volume terms, doubling productivity. Our growth was over 300%. And this is during a crisis.How does this happen?
- Step 1. You leave a request on our website.
- Step 2. Discuss options to get started.
- Step 3. Think, choose the right partner status.
- Step 4. Getting exhibition samples and getting started.
No matter how many new finishing materials appear, few of them can compete with an incredible variety of decorative plaster coatings. Moreover, their manufacturers also do not waste time, and constantly expand the assortment offered to our attention.
But how can an ignorant person navigate the sea of brands and names, effects and application technologies? The video in this article on the topic: "Production of decorative plaster" will answer many of your questions.
The difference between decorative plaster and coating is that it does not require subsequent finishing, but in itself is a decor. Of course, finishing painting can be done (see Do-it-yourself painting of decorative plaster), but most often, the plaster mortar is tinted in bulk. Glazing translucent compositions are simply applied on top, which are designed to emphasize the pattern, make the color deeper, and also protect the surface from contamination.
- It should be noted the versatility of decorative plaster, as finishing material, as it is perfect for both facades and interiors. Another thing is that in both cases they use different reliefs and artistic effects - but this is quite normal.
- Today there is such a variety on sale that it is not surprising to simply get confused. Nevertheless, beautiful names imported mixtures, translated into Russian sometimes just mean something like “plaster”, or “ decorative coating».
When choosing, keep in mind that different plasters can be oriented to create the same effect. But it often happens that from the same plaster you can make several different options coatings - and mind you, do it yourself, using the most primitive devices.
Instructions on this topic will be given a little later, but for now let's figure out how decorative plasters should be classified in general.
Classification of plasters by decorative effect
Technology for the production of plaster mixtures for last years has undergone many changes. Previously, formulations based on the use of gypsum as a binder were intended only for internal use. Today, most decorative plasters are modified with polymer additives that give them water-repellent properties, and the same Venetian can now be seen not only indoors, but also on the facade.
If you try to classify plasters by decorative qualities and compositions, they can be divided into five categories. Two of them are thin-layer options based on polymer resins and colloidal cement glue (microcement). The other three types are made on the basis of mineral fillers.
These are terrazite plasters; compositions containing crumbs of natural stone - as well as textural plasters that allow you to work in the sgraffito technique. All of them differ in components, application methods and layer processing options.
Plaster with crumbs and terrazzo
Such plasters are used mainly for facades, and can be made directly on the construction site. Therefore, let's say a few words about how to produce decorative plaster based on natural stone chips.
- A solution is prepared from Portland cement, and ceramic, granite, or marble chips with a fraction of 3 to 5 mm are added to it. The final color of the coating depends both on the shade of the filler used and on the color of the solution, which is obtained either through the use of colored cement or by tinting.
- Marble or granite screenings most often have bright hues, and in order to shade them and make them more expressive, pigments such as iron minium, ocher, chromium oxide are added to the solutions. This is how a solution for a decorative coating is prepared, but the preparatory layer is performed in the traditional way.
- It is very important that the leveled base is well dried before the decoration in the form of a pebble mortar is applied to it. The hardened plaster coating is moistened with water from the spray gun, the decorative layer is applied continuously and leveled.
- After a day, the coating is washed with a scattered water jet until the cement milk stops flowing. Thanks to washing, the cement layer is partially removed, and a pronounced granular texture remains. At the same time, it seems that the crumb itself stuck to the surface. Well, how beautiful it can be, you can judge from the photo below.
- Plasters based on stone chips are also sold in ready-made, complete with tinted quartz primer, and varnish to protect the finished coating. But if you consider that the price for a bucket with a capacity of 15 kg, which is enough for plastering 12m2 of a wall, costs at least 2000 rubles - and this is without taking into account soil and protection - then it is easy to calculate how much the entire facade will cost.
- In large-scale construction, to create a crumb coating on the facade, they also use a method in which the crumb is not added to the solution at all. In this case, it is thrown onto a plastic layer of colored plaster with the help of a pneumatic tool - a crumb thrower. This technology allows not only to improve the quality of the coating, but also to significantly increase the productivity of work.
- Terrazit plaster is usually used for finishing facades. administrative buildings. It is similar to pebble, but its fundamental difference is crushed mica, which is present in the plaster composition, occupying about ten percent of the total volume. Stone chips are also there: its fraction can be either very small, only 1 mm, or quite large, up to 6 mm.
In addition, additives such as crushed ceramics and anthracite can also be found in terrazitic plaster. The technology of its application is similar to pebble, only after hardening it is still processed with a metal brush or cycles - depending on what texture: rough or smooth is required to be obtained.
Variety of plasters for sgraffito
This type of plaster coating is the most labor intensive and difficult to perform, and therefore is used only for decoration. individual elements facades, or to create accents in interiors. By and large, the term "sgraffito" does not refer to plaster, as such, but to a technique that allows, due to artistic painting, or mechanical processing of layers, to perform patterns, ornaments and drawings on the surface.
So:
- In this case, thin-layer colored plasters based on gypsum or cement are used. And here cardinal difference them from other decorative plasters lies in the fact that the composition contains not only additives that improve the plasticity of the solution, but also additives that slow down the hardening of the screed. This is very important, so you need not only to have time to apply and smooth the layer, but also to make an ornament.
- It is clear that such work, which we see in the example presented above, is only possible for the master. A person engaged in such work should, at a minimum, be able to draw. So if you are endowed with artistic talent, then you may well try to create at least a small panel for a start.
- In general, stencils can also be used to create beautiful ornaments using the sgraffito technique. If you just want to get a discreet relief that could be applied over the entire area of \u200b\u200bthe walls, then you can make such a coating using simple tools like textured roller or stamp.
Note! When working with textured plaster, you can apply not only some artistic talents, but also just a little imagination. All those reliefs that today are made with the help of primitive devices and improvised materials can also, by and large, be attributed to sgraffito.
- These are fashionable textures today brickwork, concrete, “wave”, “reed”, as well as a relief with the “grass” effect, which is performed using a rubber roller with a rope wound around it. As they say, cheap and cheerful. After all, wet plaster can be drawn like a landscape sheet: to give the appearance of a wall sheathed with large-format panels, to imitate cladding, and not only from brick, but even from torn stone.
- If you want the surface of the coating to have a rough texture, please print a piece of foam rubber on wet plaster, and here is a surface that looks like concrete or brick. You just have to give it the appropriate color, decorate it with a glazing composition on top - and you will get a gorgeous coating.
- A similar relief can be made even by plasterboard sheathing, but it will give the impression that you have a brick wall in front of you. For this, you need something: a long wooden ruler, and a piece of rail 10 mm thick, with which you will imitate the jointing of masonry joints.
- Most decorative plasters designed for independent work, which come ready-made from the manufacturer, have exactly the properties that are necessary for making reliefs in the sgraffito style. Many of them are focused on some specific effect - for example: imitation of the rough surface of a natural stone called travertine.
- On a well-leveled surface, it is enough to apply only one layer, the thickness of which is dictated by the fraction of the filler. On the plasticity-preserving plaster, grooves are drawn with a spatula and slightly smoothed with a trowel.
If the solution is tinted in bulk, then a day after applying the layer, the wall can be treated with colored wax, and then wipe off its excess by going into the recesses and pores of the coating, the wax will make them more contrasting. If you do not tint the plaster, then decorative paint is used to give the coating color. As you can see, there is no particular difficulty in applying it - watch the video once, and you can repeat what you saw yourself without any problems.
Thin-layer plasters
In principle, most decorative plasters are thin-layer, since they are not intended for surface leveling. And if so, then at the time of their application, the surface must be plastered in the traditional way, using the base composition. Finishing putty, in this case, will replace the decorative coating.
- One of the options for thin-layer plasters are compositions based on colloidal (finely dispersed) cement glue. Their fundamental difference from other cement-based plasters is the fact that the dry components - both Portland cement and sand - are crushed together in a vibrating mill to a state of dust.
- Coloring can be done either by using colored cements or by adding alkali-resistant pigments to white cement. Thanks to such a fine grinding, when applied, the plaster particles fill the smallest pores in the base, which gives the best adhesion - moreover, they fit perfectly not only on concrete, screed or drywall, but also on wood, and even on plastic.
- In addition to colloidal glue, river or mountain sand with a fraction of up to 1 mm is taken to mix the solution, and sand obtained as a result of crushing stone: limestone, granite, or the same marble is also added to it. All this is mixed with water, and since this type of plaster is used mainly for finishing facades, modifying additives are necessarily added to them, which give the composition water-repellent properties.
- The mixture is stirred for about seven minutes and simultaneously subjected to two-frequency treatment in the activator until its viscosity decreases. The solution is usually applied mechanically, with a uniform layer of 3-4 mm, after which the screed is leveled and overwritten.
- The coating is extremely durable, resistant to mechanical stress and moisture, with a silky texture to the touch. The degree of roughness depends on the size of the filler in the solution. Manufacturers of decorative plasters could not ignore the option with such excellent performance characteristics, and took it into service, offering the consumer compositions called "microcement".
- Cement plasters, as such, are rarely used in interiors - mostly gypsum plasters are used. But with the help of microcement plaster, the design of walls and ceilings “under concrete” that is so popular and fashionable today is carried out. Note that this texture is an integral part of such architectural trends as high-tech, industrial style, loft.
Factory plasters of the "microcement" type are usually sold in a kit, which separately contains a colloidal mixture of cement and sand, a binder liquid polymer, water-repellent vapor-permeable impregnation and pigment. Although, the shades of gray cement in themselves, without any colors, are great for imitating the surface of concrete.
Silicone (siloxane) plaster. Silicone resins act as an astringent in it. Combines almost all the advantages of the above types. It is vapor-permeable, hydrophobic, resistant to aggressive environments and ultraviolet radiation. A wide range of colors of this material is produced. Due to its good plasticity, such plaster is used to create relief patterns.
The only negative factor is the relative high cost of this coating. Therefore, it is worth using it when the facade of the house is exposed to significant loads, in areas of high climatic humidity and negative technogenic factors.
All these types of plasters, in turn, are divided into two subspecies: closed with water and solvents. The former are most often used indoors, the latter - outside buildings. But, neither one nor the other, after hardening, are not afraid of water.
You can do decorative wall plastering with your own hands almost everywhere - from the facade of the house to the partition in the kitchen.
Note! Many of these coatings are water-resistant and can therefore be used in bathtubs and indoor pools.
For outdoor decorative materials, coarse structural materials on a lime binder are usually used. Thanks to special modifiers, the plaster does not deteriorate when interacting with water, so even heavy rains are not afraid of the facade.
Sometimes silicone materials are also used for plastering walls outside buildings - they create relief images. The rarity of their use is explained by the fact that, firstly, it is very difficult to independently perform such work, and secondly, it consumes a large number of plaster, and hence the cost of coating increases.
For interior work, all four types of coatings can be used. Important nuances: the more textured, that is, the thicker the material, the greater its consumption will be. But, on the other hand, when applying it, there is no need to carefully prepare the surface - it itself masks irregularities and defects.
Thinner types of plaster need better preparation bases, but are spent more slowly.
Application and coloring
Artistic plaster is applied in many ways: with conventional and embossed rollers, spatulas, brushes, foam rubber sponges of various shapes, home-made fixtures and even hands.
Applying decorative plaster by hand
Different ways of applying textured plaster can achieve completely opposite effects. This statement is especially true in relation to acrylic plaster. Often it is applied in several layers, with different colors and often different methods.
Therefore, before you make decorative plaster in your home yourself, think very carefully.
For its manufacture, it is not enough to have skills in construction. You have to be, to some extent, an artist. Moreover, each of the specialists in work with decorative plaster takes a training course at the manufacturer or at the official dealer of each type of decorative plaster.
Only in this way the master, knowing the material thoroughly, can make ordinary walls a real work of art.
But, there is an exception - structural views artistic plasters. You, even with very modest knowledge in this area, can apply them yourself with an ordinary spatula. One of the main advantages of such coatings is that they are almost impossible to spoil.
Any decorative plaster is applied in several layers. The first one is primer. Next comes the work with the layers of the coating itself. Depending on the idea, there can be from only one to 15 (!). Then, as necessary, special azure is used to create visual effects.
One of them is the recently fashionable craquelure - the effect of aged, cracked walls. To create it, a special varnish is applied over the coating, which tears the top layer of plaster. If the lower layer has a different shade, it will be visible through the cracks.
Important! You should know that Venetian plaster without fail covered after hardening with a special protective wax.
Almost all types of decorative plasters are sold in white. The store will offer you to choose a color from 50 to 5000 shades, which will depend on the manufacturer. After you decide on this, will test paints be made - on plywood, with a volume of 0.5m? roll out the plaster with the application method you have chosen and with the selected color.
This will give you an opportunity to see how the homemade decorative plaster will look on the walls. If you do not like the appearance of the coating, then you can choose a different shade or color.
If you decide to tint the plaster yourself, add a little bit of pigment and be sure to make control colors on cardboard or plywood. Do not forget to wait until the sample is completely dry, because the color may vary at different stages of drying.
Production of decorative paints and plasters - dom-s ltd - belvedere
We produce decorative paints and plasters of the Belvedere series, which includes:
- - decorative paints;
- - decorative plasters;
- - impregnations, and special compositions.
All materials are produced in water-dispersion basis using natural fillers, due to which they have high environmental performance.
In production, we use only the highest quality raw materials, we carry out mandatory input control and mandatory control of each batch of produced material. The warranty period of decorative paints and plasters of the Belvedere series is 6 years, and the average service life is at least 10 years.
For the implementation of any interior projects, both matte coatings and pearl fillers are produced. various shades. Created catalogs allow you to choose the most suitable color coatings, and if this is not enough, our colorists will help you choose the unique color of the material that you need.
Our products are primarily intended for professional craftsmen, so we regularly and free of charge conduct classes on the technique of applying decorative plasters and Belvedere paints. Anyone can take part in them.
Our materials have their own characteristics, due to which they differ from the products of other respected domestic and foreign manufacturers.
Series "Belvedere" by appearance as close as possible to natural materials- various fabrics, types of stone, wood, some types of leather, etc. At the same time, we always take into account labor costs during application - the number of approaches should be minimal, open time work the most convenient for the master, with one material you can perform many effects on the wall using various tools and application technology.
Special attention we pay technical support our partners - we never leave them face to face with possible problems, we always participate in the solution difficult questions that can occur when using any decorative finishing materials.
Technology of decorative plaster
Total production cost per day (for example, 1 ton of decorative plaster) The raw material cost per day of 1000 kg is 454 y.e. + Production costs 82 c.u. e. total total cost without taxes 536y.e.The average market value of manufactured products 1 kg kg - 1.5 y.e.. i.e. 1000kg costs $1500.
look Profit share in the production of decorative plasters Economic efficiency When opening an enterprise, your monthly income is:
Total cost per month 536*24 = 12865 y.e.
Selling products 1500 * 24 = 36000 y.e.
Profit for the month 36000 - 12865 = 23135 y.e. (excluding tax).
Economic justification opening of production own experience Of course, in the first 2-3 months, your volumes will not exceed 30%, analyzing on your own experience, while the competition of materials significantly exceeded the consumption of imported materials in relation to our products, but time has passed and our products have proven themselves due to discounts, the production time is 1 -2 days, tinting in any color, written guarantees.
Thus, even if you sell the material in the first place, your profit will cover all your costs and you will receive a profit of $ 9,000, and if taxes are taken away, then the net profit will be from $ 6,000 to $ 5,000.
For the 4th month, your profit will grow to 12-18,000 dollars, in the second year it will really come close to our 20,000 dollars. The technology package is sold in three stages Purchase of technology from 8.00 to 12.30 from 12.30-13.30 conclusion of a contract for technology, from 14.30-19.00 training at the enterprise (1-2 technologies per day). The sale of technology takes place only on Saturday. Before arrival, you must provide your full name and country to plan your working day, as well as plan your stay at the Gomel Hotel, tel. +375+232+71+67+25 (1 person - 50 USD, luxury - 100 USD, 2 people - 70 USD, suite - 120 USD .... if we order there is no armor).
The second stage is to order our equipment, or you make it yourself.
After purchasing the technology, incomprehensible questions are discussed at any time and free of charge, our position is to help open a similar enterprise like ours!!!
Our company is ready to help in choosing a recipe from your material, rational construction of the technological chain, providing necessary equipment, we offer a list of enterprises producing raw materials for production, information support.
When can you contact You can call the office of Rol-Stroy-Industry right now and ask questions regarding the technology +375 29 647 27 96 Andrey Anatolyevich, or Ch. technologist +375 29 644 52 54 Pavel Ivanovich.
---------- Any use of materials from this site is possible only with the written permission of the Directorate of ALC "Rol-Stroy-Industry".
Decorative plaster - catalog of decorative plaster and sale at manufacturer's prices.
Decorative plaster "Latex-plastic" NEWDecorative material for creating coatings with different structures and patterns: from surfaces with a slight gloss in the style of "Venetian plaster", imitating the texture of polished or marble, to obtaining relief coatings with different levels of gloss. To obtain an additional decorative effect, a special wax is used.
Read more... Decorative textured plaster
Decorative material for creating coatings with different structures and patterns: from smooth surfaces with a slight gloss in the style of "Venetian plaster", imitating the texture of polished stone or marble, to obtaining relief coatings with different levels of gloss. To obtain an additional decorative effect, a special wax is used.
Read more... Decorative structural plaster
Decorative thin-layer plaster based on acrylic with calibrated natural marble grain with a characteristic smoothed surface. Widely used for and protection of facades and wall surfaces.
Designed to create a fine- and medium-grained coating; forms a characteristic smooth surface. Looks great on fronts.
Read more... Colored decorative plaster for interior and exterior use
Decorative plaster (Bayramix type) based on natural marble chips and acrylic binder.
Read more... Decorative plaster "Venetian"
Decorative multilayer coating imitating marble or other natural stone. Gives you the opportunity to get different colors and gloss. Depending on the method of application and subsequent processing, interesting color and artistic compositions can be obtained. Gloss level can be from semi-gloss to high gloss.
Allows you to get the effect of natural stone or marble of various breeds;
Read more... Decorative plaster "Roller" (with the effect of "bark beetle")
Textured material with coarse-grained natural filler to obtain a relief coating.
Helps to create a relief in the form of shallow or deep furrows of various shapes;
Read more... Decorative textured plaster "Wet silk"
A delicate decorative fabric effect with pearlescent particles that creates the effect of iridescent silk. Ideal for creating stylish and original interiors.
Creates an elegant, decorative fabric-like finish with pearlescent particles. The cover is washable.
Read more... Decorative plaster "Sea breeze"
Semi-transparent decorative coating with pearlescent particles and the addition of river sand, creating the effect of a light breeze or floating clouds.
Read more...
How to make decorative plaster yourself
It is not difficult to make walls from decorative plaster yourself. To begin with, we make a plaster mixture: we take water, dry and mix with a mixer until the consistency of thick sour cream and after the mixture becomes homogeneous, add PVA there and mix. At the end, our plaster mixture should become homogeneous and thick.
To prepare decorative plaster needed: 200g. PVA, 2 liters of water and 6 kg of gypsum-based mixture.
First you need to apply the main layer, for this we take wide spatula and putty the surface of the wall. When the main layer dries, you can proceed to the most important thing - decorating. There are many ways to create a textured wall surface.
You can apply chaotic strokes over the entire surface with a spatula, you can use spatulas of different sizes, the wall also looks very interesting if you take an ordinary broom and blot the surface in different directions with a sponge. There are a lot of ways and, after experimenting a little, you will choose the most suitable for yourself.
a source
DIY decorative plaster
Decorative plaster is a method of interior decoration, with the help of which it is possible not only to diversify the color scheme in the room, but also to recreate various types of decor. At the same time, decorative plaster has been used quite often lately. As a result, various types and subspecies of this building material constantly appear.
Structural plaster
Usually there are several types of decorative plaster:
- structural - with its help, furrows are created;
- mineral - differs from other types of fillers: granite or marble chips;
- textured - when using it, you can reproduce various types of textures;
Venetian - will add sophistication to the interior, but requires a special application technology.
mineral plaster
The main types of plaster used in interior decoration are the so-called "Fur coat", that is, uniformly rough plasters, as well as "Bark beetle" - its use allows you to achieve a surface resembling oak bark.
The grain sizes that the material with which it is produced must have do-it-yourself wall plastering, vary between 0.7-3 mm, which allows you to create various patterns. The tools that are used in its application are usually a spatula, roller and sprayer. It is very important to choose high-quality tools, since the final result of the surface sometimes depends on this.
Currently, the most popular types of decorative plaster, such as "Mizuri", "Venetian plaster", as well as "Velveton".
Textured plaster
Today, decorative plaster has become a new option for interior decoration and a good alternative to wallpaper, because, depending on its type, it allows you to create a variety of wall textures, “play” with shades, create unimaginable effects, etc. Such a material in the most profitable way allows you to produce a process such as plaster walls with their own hands.
As with any other finishing method, this one has its pros and cons. The first, fortunately, is much more. The advantages include such properties of plaster as the versatility of the base, as this allows it to be applied to internal and external surfaces made of brick, wood, and other materials. With its help, it is possible to achieve the elimination of imperfections of the surface on which the plaster is applied, for example, to get rid of cracks, chips, “bubbles”, etc.
Venetian plaster
Absolutely all types of decorative plaster are resistant to moisture, and they can be easily cleaned without the use of special solvents. In other words handmade venetian plaster transfers any mechanical pressure, low and high temperatures and is very durable. And the airtightness of the coating allows you to achieve its tightness.
The disadvantages of this material are much less. The main one is that the plaster for 1 m2 of walls is much higher, and therefore the cost of such decor will be much higher. With some types of plaster, only a person who has high level skill. And removing the quirky look of decor is sometimes not as easy as it seems.
Useful - do-it-yourself decorative wall plastering
Video number 1 - Wall decoration with decorative plaster
Video number 2 - Textured plaster
Video number 3 - Structural plaster
The main types of decorative plaster
Usually all kinds decorative material, with the help of which it is divided into two main ones: facade and interior, and inside each of them there are various subspecies. Moreover, each type has its own characteristics and features that must be considered when working with plaster.
The facade type of plaster is divided into several subtypes:
- mineral, which includes marble or granite chips, ceramized or painted quartz. This allows the plaster to pass steam and tolerate moisture well. It is applied using a compressor or a specialized trowel.
- polymer is either water-based or non-aqueous and is characterized by a high level of strength, manufacturability and durability. Usually it comes tinted, that is, in certain color.
- silicate, the base of which is " liquid glass". It is a successful coating of mineral bases, but is limited in color.
- silicone well tolerates ultraviolet light, repels dust and other small particles and is airtight. In other words, the surface that results from a process such as do-it-yourself textured plaster, differs in refinement and excellent attractiveness.
Interior plaster also has several subspecies:
- relief is characterized by increased plasticity, which allows you to create various decorative effects, including surfaces that imitate natural materials.
- smooth creates an imitation of antique style and is applied in two or three layers.
- invoice counts big variety application technique and allows you to achieve surface roughness.
Do not forget that the decorative material with which you can make DIY wall plastering has a certain specificity. For example, it is not subjected to staining, that is, it may look like an unpainted textured or with the addition of some color pigment. At the same time, the color scheme can be the most diverse, which allows you to choose required shade that blends perfectly with the look of the space. Using this decorative material, you can achieve the effect of not only surfaces made of stone and wood, but also of reptile skin, suede, velor, paper or metal. Elements such as clouds, divorces, applications and much more can be easily imitated. Also, when using stencils and templates, you can apply a variety of patterns or blur several colors and achieve unusual color schemes.
Getting started and following a process like do-it-yourself decorative plaster you need to follow a few simple steps. First you need to prepare the surface, that is, remove the old wallpaper, clean the walls and eliminate peeling, and treat the walls with a primer. After that, you should decide on what effect you would like to get in the end, on which the method of applying the plaster will depend. Do not forget that the color on the surface will be two shades darker than what is in the tank with plaster, so you must adhere to the mixing proportions. The norm is the application of one kilogram of material per 1m2. At the final stage, the surface must be "sanded".
By the way, it should be said that specialized shopping centers and shops hold training workshops for those who wish to independently decorate the interior with plaster.
As a selection for your premises of one or another type of plaster, you must be guided by your own taste and style features of the available space.
In conclusion, I would like to note that by choosing decorative plaster, everyone will have the opportunity to realize various design ideas.
We also recommend
Loading...