How to make textured rollers with your own hands. Finishing the facade with a roller for decorative plaster Do-it-yourself structural roller under a brick

Use of rollers for decorative plaster makes it possible to give the surface an original appearance but not many people know about it. Therefore, coming to hardware store, ask what new tools have appeared for conducting finishing works.

You can radically transform the interior of your apartment by adding depth and shape to the walls.

Embossed roller application

This tool is one of the most popular when finishing with textured plaster. The base of its cylinder can be metal, rubber or plastic, the cover is made of fabric or foam rubber.

There are also relief rollers made of leather. From this we can conclude that it is not a problem to acquire the necessary tool, the main thing is to find an acceptable texture, for example, wood, stone or marble.

When choosing the surface of the roller, you must understand what final result you want to see:

The pile will allow you to achieve the effect of "under a fur coat." Keep in mind, the longer it is, the more embossed the surface will be. When processing brick and concrete surfaces, choose a tool with a pile thickness of 18 mm.

Plastic holes allow you to make small indentations on the work surface.
To obtain a longitudinal texture, use a tool with a convex top layer. If the image is too rough, touch up the sharp corners with a brush.

Need to make a stone-like surface? Get a roller with "ears".

How to decorate a wall with a roller

Prepare materials and tools for work:

priming deep penetration resin based;
putty, for example, "Blik", "Rotband", etc.;
building level;
rough sponge;
roller for creating a relief;
foam roller;
brushes for painting the surface;
metal trowel or with a sanding net.

The application of decorative plaster with a tool should take place according to certain rules which the instruction below will show:

from the previous material and carefully prime them.

Lay the first layer on the surface and plaster the wall to a flat surface, and if a decision is made on the combination of layers, then paint it in the desired color.

Apply a decorative second coat. Select the required density of the solution and color it. Take your time, practice first on the wall section, as you will do it.

Tip: to achieve the desired separating effect between layers, use masking tape, which you can use to make clear boundaries, and for arbitrary ones, use a self-adhesive sealant used for windows.

Take decorative plaster rollers and start creating a pattern quickly, because the material dries very quickly.

Tip: do not press hard with the tool on the plaster, otherwise you will simply ruin the textured pattern.
Move it very lightly, as if sliding on the surface.

After 15-20 minutes, moisten the trowel with a sanding net with water and smooth out the relief protrusions with light movements.
After two days, clean the small particles left after work from the wall surface and paint the layer in the desired shade with a brush or sponge.

We make a roller ourselves

More like a creative than a finishing process. Therefore, in this situation, it is more expedient that each drawing be as original as possible, for which it is best to make a roller with your own hands, and not use a standard one.

For example:

wrap a regular shop tool with a thin cord or clothesline overlap in any order. It is unlikely that anyone will be able to repeat the same pattern at home, and the price of the product is minimal;
take a standard vegetable net or plastic bag. Wrap one of these around the rigid cylinder of the roller and attach with tape, leaving natural creases. Thanks to this, not a single identical fragment of the pattern will appear on the decorative plaster;
buy a foam roller and cut whatever you can on it. Although this process is laborious, the final result is impressive.

roller for structural plaster- make the interior original

And most importantly - your own roller and finishing surfaces with it will add to your sense of self-satisfaction.

Conclusion

Thanks to textured rollers, it became possible to quickly decorate large areas of surfaces with a repeating pattern. Also, if you have great desire to give the interior in the house originality and originality, such a tool can be made with your own hands from improvised materials.

When working with decorative plaster, remember that it begins to harden after 15 minutes. Therefore, such an amount should be treated with a solution square meters, which you can decorate for a given period of time. In the presented video in this article you will find Additional information on this topic.

How to give a wall the appearance of brickwork without laying a single brick? Such results can be achieved using decorative rollers that imitate brickwork. Several tools will help you in this matter: a textured brick-like roller, and decorative plaster. It is also necessary to add various auxiliary devices to this list, like a bath for plastering and so on, and most importantly - not a single brick.

About why a roller is needed to imitate brick, as well as the secrets of applying plaster with such a tool, you can read in this article below.

Let's start with what is decorative roller under a brick, and for solving what decorative tasks it is needed.

You can't do without a roller if you want to give the walls a unique look without serious material and time investments. This technology came to us from European countries, where the technology of covering surfaces with decorative plaster using structural rollers is widely used. The most widely used rollers to simulate brickwork.

In the Russian Federation, the use of this kind of rollers began relatively recently. And to obtain such an invoice, various improvised means were used. For example, after applying a layer of plaster, the drawings were applied using knives, nails or a large rope. Or, before applying the finishing layer, special mesh forms were used.

Today, there is a fairly wide range of construction equipment that will help you achieve incredible results without resorting to the use of tools that are not intended for this. A structural roller under a brick will help you with this.

In the manufacture of this kind of rollers, as a rule, a hard rubber coating with a uniform and symmetrical pattern is used. As a result, the “pattern” of the brick turns out to be natural, and, when using high-quality materials, at first glance it is completely impossible to distinguish it from natural facing bricks.

Another advantage is a wide range of color palettes and plaster textures. If you want to get a regular brick pattern - use standard plaster and apply it with a roller under the brick. If you see in your design decorative brick, then select the required plaster texture, and purchase a roller that will be as close as possible to your design decision in shape.

Such brick rollers, at their price, have excellent parameters of stability, efficiency and reliability. A one-time investment in a purchase will be enough for several repair work in in full. And with proper storage and proper use, the service life is increased several times.

The rubber from which the rollers are made under the brick has high wear resistance parameters, and is practically not subject to wear.

As a result, a structural brick plaster roller is an excellent tool for decorating any surface, which has a number of undeniable advantages, such as:

high strength,

convenience and comfort in work,

cheapness,

a huge selection of textured and decorative coatings with which such a roller can be used.

You can buy a professional roller for brick-like plaster in our store in Madex, it is also possible to order it with delivery by Russian post through an online store at a great price if you are not in Moscow.

Decorative plaster is a common finishing material that allows you to get a durable, wear-resistant coating. With its help, buildings are decorated both outside and inside. The relief roller for plaster creates prints on its surface that imitate various types of surfaces. In this way, you can recreate the texture of wood, stone, "fur coat" and many other types. The resulting coating gives an aesthetic, attractive appearance to the room, emphasizes the originality of the design.

Classification of rollers according to the material of the contact surface

Nozzles for rollers for decorative plaster differ in the material from which they are made. Differences in the properties of the contact surfaces ultimately affect the final result. A detailed classification on this basis is presented in the table.

№	Tool bit groups	Description, characteristic
1	rubber	they work mainly experienced craftsmen because it requires a certain skill and skill
2	wooden	requires drying, cleaning after use, otherwise it swells and deforms, and then, after drying, it may crack
3	plastic	cheap substitute for rubber nozzles
4	leather	rollers with these nozzles create marble-like finishes, make Venetian plaster

Exist big variety nozzle textures. Some can be seen in this photo.

Varieties of nozzles for rollers
Big choice rollers for applying decorative coatings contributes to the realization of a wide range of design solutions. It is quite easy to choose a tool for a specific case.

Separation of tools by the type of pattern they create

Plastering with a roller gives the surface a variety of patterns and textures. Depending on the patterns created and the clarity of the relief, the rollers are divided into textured and structural. The effect achieved will depend on the type used.

Textured plaster rollers are tools that create a design that resembles such common types of finishes as:

fur;
wooden;
textile;
marble and others.

Imitation of the required relief is achieved by using nozzles with an appropriate coating. Examples of the use of various materials for these purposes are as follows:

to obtain a "fur coat", pile rollers with long threads are used;
the surface under a natural stone is created by looped patterns on the contact part of the roller;
leather and fabric rollers for textured plaster allow you to achieve a marble effect.

The most realistic patterns are obtained with uniform movements tool. The working solution is directly applied to the surface by the device, and at the same time the required texture is created.

When decorating with such rollers, it is necessary to consider:

with wide nozzles, the desired effects are achieved more easily;
bulges on the working surface are created by the depressions of the contact part of the tool, and the recesses on it are by its protruding elements;
the plaster layer should be sufficiently plastic, but not fluid.

By width, textured products are divided into short (up to 0.3 m), medium (0.3-0.5 m) and long (more than 0.5 m).

An illustrative example of a structure

Structural rollers for decorative plaster are distinguished by the fact that they are used after applying the finishing composition to decorate complex, repetitive structures (ornaments, patterns). The figure shows the possible appearance of such tools.

In most cases, the nozzles for such rollers are made of wood or rubber. The ornament on them has clear contours and is closed in a circle on the entire working part.

Such a tool allows you to achieve various volumetric effects. It is often used when applying a liquid composition on top of finished surface. Because the clear relief of the nozzle entails the formation of an uneven resulting coating. This is due to the accumulation of plaster in the cells of the roller.

You can avoid this kind of trouble by using a tool with a fine relief of patterns or by working on a dried layer.

Textured and structural rollers allow you to achieve many various effects in interior design.

Self-made roller at home

You can make a roller for decorative plaster with your own hands. Such a solution will allow you to create a truly unique design, spur Creative skills. An exclusive view of the interior will be provided.

An example of self-made roller

Depending on which surface it is desirable to simulate, do
following:

obtaining a wood texture for walls is ensured by a wrapped bundle (it is better to glue it) with a rubber roller, and coils of unequal thickness are laid in different directions;
a plastic roller wrapped with a narrow tape of compacted fabric also makes it possible to achieve a “wood” look on the surface to be decorated;
if a smooth nozzle is pasted over with a cloth, then a textile ornament corresponding to its texture will be displayed on the wall;
recesses and patterns can be cut on the interchangeable foam parts, which will allow you to create images that depend on your personal imagination, but you will need to work carefully.

The simplest option on how to make a nozzle with your own hands: you need to randomly wrap any existing roller with polyethylene, a rag, a rope or bundles. Individual result- guaranteed.

Technique for working with decorative plaster

To apply decorative plaster with a roller, you will also need some other tools in addition to it, such as a spatula, level, paint brushes, hard sponges, graters, trowels. Of the materials, in addition to the mixture, a resin-based primer is required.

All work is carried out in a sequential manner. Its main steps are:

prepare the walls: clean from dirt, old coating, exfoliated fragments and primed;
the working plane is plastered with the first layer to a leveled state and, if necessary, painted;
the next layer (after the previous one has dried) is applied decorative plaster of the required density;
a tool with textured or structural nozzles quickly draws up a drawing;
after 20 minutes, flaws are removed from the surface moistened with water with a trowel;
two days later, minor defects are removed and painting is performed.

The photo shows the process of creating a design.

It is more efficient to perform plastering together: one applies the plaster, and the other gives the desired decorative appearance to the surface.

It is necessary to apply the compositions with structural rollers without overlaps, next to the previous passes. When working with a tool with a textured coating, strong pressure is not required: the smaller it is, the greater the effect. All movements should be carried out evenly, smoothly and as continuously as possible from the ceiling to the floor.

The nuances of coating with a roller

The application of plaster with a roller must be accompanied by certain rules. Work should be done as carefully as possible. The nuances of decorating come down to the following principles:

Compliance with the simplest rules allows you to apply decor with your own hands in the shortest possible time. The main thing is to constantly monitor the drying of the plaster solution.

Textured plaster relief roller is created quickly. This method of decorating makes it possible to decorate with a pattern large areas walls. To achieve a unique result in the shortest possible time, an integrated approach to the entire process is required. It consists in observing the application technology, right choice working tool, use finishing material High Quality. A big plus is the ability to independently perform all the work and make tools for applying decorative plaster.

An example of working with a relief roller is presented in detail in the video.

Textured surface finishing is one of the ways to give individuality to interior design. It is performed with special painting tools - textured and textured rollers, with which you can decorate the walls. artistic painting or create interesting decorative effects on them.

The quality of this type of finish depends on how carefully the preparation of the base was carried out, the coating technology was followed, and the roller itself was chosen correctly. Consider the types of relief painting tools and how to use them.

Application features

There are two ways to use a roller to decorate surfaces.

In the first case, it is used as a tool to stamp various patterns: from the simplest to the most complex fantasy ones, similar to how, when wallpapering, the canvases are joined to each other to continue the pattern. The roller can be pressed with different force, resulting in a more or less pronounced relief.

In the second case, using a rough roller or a tool with a patterned coat on the wall, they imitate the texture of various materials: brick, wood, marble or stone, and also make glazing - spectacular blurry spots.

To create a designer wall finish, you can purchase a ready-made decorative roller or build it yourself. So that you can better navigate the range of textured painting tools, let's take a closer look at their varieties.

Kinds

The design of a standard roller includes a metal rod-holder with a cylinder and a handle. The bases of the cylinder can be metal, plastic, rubber. Structural patterned specimens feature a rotating cylinder that draws ink, coupled with a rubber nozzle carved into the surface to create prints. The main difference between paint rollers is the coating of the cylinder.

materials

For the manufacture of coatings for cylinders go various materials, depending on what it can be:

rubber or silicone with many notches and protrusions different size, due to which a variety of decorative effects are created that imitate brickwork or relief with a pattern.
foam rubber, which is convenient to work with water-dispersion paints and paint small areas. Its disadvantages include poor painting of an uneven plane, the formation of splashes when pressed hard and fragility.

Styrofoam- This is a cheap analogue of a rubber roller. The disadvantage of polystyrene is susceptibility to mechanical stress, so such a tool will need to be repeatedly changed to a new one during work.
Leather- with its help you can achieve a very beautiful effect that imitates a marble coating. Venetian plaster is best applied with a natural leather roller, as it perfectly copes with this task.
Wooden– since the tree is ecologically pure material, then it is advisable to use such rollers for finishing children's rooms. They allow you to get a beautiful convex ornament on the surface treated with paint.

plastic- when using it, the decorative mixture will lie as it should only on an absolutely smooth surface, so you cannot do without careful preparation of the base. In addition, plastic is prone to cracking due to prolonged use.
Fleecy (fur)- both natural and artificial fur can be used as a coating - polyacrylic and polyamide, which have different lengths of villi. The degree of roughness and the depth of patterned inclusions on the treated surface depend on the length of the threads.

Invoices

Decorative rollers are distinguished by a variety of structures, due to which the final ornaments are obtained. The purpose of some tools is to simulate texture natural materials, and others - a simple creation of an arbitrary pattern.

According to the method of application, they are:

Textured products. For their manufacture, hard or soft rubber is used. When a raw plastered surface is rolled with such a tool, it acquires relief. Using rollers with different patterns or just a rough cylinder, you can get the texture of the most different materials from fur and wood to textiles and stone chips and even bamboo fiber. A fur coat provides the effect of multidirectional fibers, a rubber-coated roller allows to imitate a natural stone, where a special looped pattern is cut out, and traces of bubbles remain after the spongy tool.

structural fixtures. With their help, a complex repeating ornament is applied to the plaster, for which the stencil roller is intended. A feature of use is the application of a finishing coating on an already finished surface, for example, a painted or evenly plastered wall. Decorating begins when the plane is completely dry. The most beautiful ornament is obtained if you use a figured roller with a certain pattern.

effects

decorative trim surfaces are endless possibilities for creativity. Of course, for these purposes, the easiest way is to use ready-made textured design rollers, which will be ideal helpers for creating all kinds of complex and very beautiful decorative effects:

"Diagonal" is an unusual abstract pattern of slanted lines.
"Blots" are picturesque spots with arbitrary outlines resembling spreading drops of liquid.
"Rain" - despite the name, due to the presence of chaotic lines and ramifications of the pattern on the cylinder, visually this effect looks like a fancy floral pattern.

“Frosty Morning” is an original ornament that resembles a pattern of frost that remains on glass in frosty weather in winter.
"Rhinestones" - a symmetrical ornament of large imitations precious stones arranged in rows.
"Blossoming Meadow" is a spectacular fantasy floral ornament.

Not less than beautiful effects are obtained by using rollers in combination with other tools for decorative and finishing work. For example, to decorate a wall with a pretty polka dot pattern, a standard roller is used together with a stencil - purchased or made independently from thin plastic.

To create the “bamboo” effect, the base is covered with a white decorative mixture using a trowel. It is also used to form the background pattern. Until the main layer is dry, a pattern imitating bamboo shoots is created with a trowel or spatula. Then the wall is processed decorative wax using a paint roller. And at the end, point accents are placed with decorative varnish silver color to make the drawing more expressive.

Glaze - blurry spots of deep shades that differ in saturation are made by painting the wall with a base color and winding a chaotic pattern with a dry or wet cloth or cellophane. To create original textures, you can use a sponge to create a soft spotted ornament or a brush for spectacular splashes.

An interesting effect is obtained from arbitrary prints on the wall of their own palms.

How to choose?

Variety of painting tools decorative painting can complicate the choice of roller. To avoid mistakes when buying, we suggest using the tips of masters who have been engaged in decorative and finishing work for more than one year.

What should be done:

Check the quality of the working part of the roller and its resistance to deformation. To do this, you need to significantly crumple the coat, and then assess the condition. Strong dents on a fur coat are a reason to refuse to purchase such a roller.

When choosing a long pile roller, it is necessary to carry out visual inspection fur coats for falling out fibers, which are sure to stick to the painted wall, which looks unattractive.
Make sure the clasp is reliable - the bracket that acts as the basis of the tool. Soft clasps deform faster, which not only reduces the life of the roller, but also negatively affects the quality of the finish.

For painting walls, a product with a standard short handle is quite suitable, while for finishing the ceiling it is already worth purchasing a tool with a special telescopic handle.

What to look for when buying:

Structural rubber roller - in this case, it is important to evaluate the quality of the rubber and the operation of the cylinder. good tool has an elastic coating and an easily scrolling, non-vibrating roller. The optimal solution for creating the perfect pattern is a tool that has a lubricating cylinder and a hopper, which allows you to stretch the entire pattern without having to interrupt to saturate the coat with paint;
Textured tool with a foam coat - here you need to make sure that the selected sponge coating has pores of the required diameter to obtain a decorative effect of bursting bubbles or lunar craters;

Leather embossed roller - since it is mainly used to work with Venetian plaster, then try to consider only those products that have a natural leather coating. It is impossible to make prints on a plastered base with devices from synthetic analogues - once, and they are able to dissolve - two;
Pile roller - here you need to be guided by the length of the villi, which is from 0.2 cm to 2.5 cm. The effect of a strong “shaggy” wall is created by a long-pile roller;
Pattern tool - great importance has a figure stamp pattern: the most beautiful ornaments are obtained through a combination of thin lines and jumpers present in the pattern.

You can buy a stencil or texture roller or do it yourself. The usual tool for painting is supplied with a home-made cloth, suede, paper or sponge coat, securely fixing it with threads. This device is good for applying chaotic spotted ornaments.

Surface preparation

Wall painting is the type of finishing work that everyone can master, the main thing is to prepare the surface with high quality. If you neglect the pre-treatment of the walls, then you can not count on the quality and durability of the finish.

Work order:

Clean the surface of the old coating, for example, wallpaper.
Smooth out irregularities in plaster or concrete base grinder.
Prime the wall and seal the cracks, sinks, chips with a plaster mixture.

Align the base with finishing putty and sand.
Dust the surface with a vacuum cleaner or herbal brush.
Re-treat the base with a primer to increase adhesion to the decorative coating and reduce its consumption.

When the wall is completely dry, you can start decorating.

Paint application

For many beginners just entering the world of repair, it seems that using a paint roller, given its elementary design, is as easy as shelling pears. Nevertheless, working with paintwork materials (LKM) requires some knowledge, without which a perfect finish, alas, is impossible.

So, first, the corners are painted with a brush or a corner roller. LKM is thoroughly mixed with a construction mixer at low power. Fill the cuvette with paint and roll the roller in it with back and forth movements so that the fur coat properly picks up paintwork. At the end, a tool is passed along the inclined corrugated base of the cuvette to remove excess coloring composition and distribute it evenly over the working part of the roller - a fur coat.

Is it possible to apply plaster with a roller - this is a question for amateur finishers who plan to do repairs on their own. Professionals say that it is possible, since such work does not require special skills in construction. You just need to know how to select and use the material and tool.

Decorative plaster under the roller should not contain large fractions, since such a product is applied with a spatula. Professionals advise using a ready-made composition. The tool is easy to apply, and even non-professional craftsmen can work with the product. The finished composition also does not change shade after drying, unlike dry mixes.

Types of plaster

The roller begins with the choice of material and tools, but before that you should familiarize yourself with the concept of "decorative plaster". This is a product containing various fillers. Most often, wood fiber and stone chips are used. The components bind acrylic and polymeric substances. Such components are also responsible for the elasticity and drying speed of the product.

There are several types of material suitable for this tool.

Structural plaster

Such material forms a smooth coating on the surface. To apply the remedy, use different tool, including rollers for decorative plaster. Structural product usually comes in light shades. To give color, a special color is used, which is mixed with the material before application.

Venetian plaster

It is a product that contains marble flour and an aqueous emulsion. The advantage of the material is that it can be tinted in any tone. Before using the product, the surface is leveled. Venetian plaster creates a coating on the building base with the effect of marble, leather, granite, cork tree etc. The product is environmentally friendly and water resistant, therefore it is used for decorating surfaces in rooms with high humidity(bathroom, swimming pool and others). The disadvantage is the high price.

Textured plaster

This tool forms a relief on the surface immediately after application. This result is achieved thanks to the granules that are part of the product. Based on this, the material is classified into coarse, medium, fine and fine textured. As video tutorials show, applying textured plaster with a roller is a simple process, but requires careful study.

Types of rollers

Tool for decorative material subdivided into several types.

Roller material type

The final result of finishing depends on the working surface of the roller. Classification of tools by type of material:

Rubber rollers. Such tools require repair skills, so the devices are not recommended for beginners who do the work with their own hands. The rollers form a clear texture on the surface due to the protrusions and recesses located on the roller.
Wooden tools. They are suitable for non-professional finishers, because, unlike rubber products, plaster does not adhere much to the surface of the roller. The disadvantage is a short operating period. Over time, the wood swells and flakes off, which makes the tool unusable.
Plastic rollers are budget tools. This is the only merit. Disadvantages - they are deformed upon contact with the material, cracks appear on the roller, which negatively affects the final result of the finish.
Leather tools. These rollers are used to apply Venetian plaster. The tool helps to create a marble effect on the base. Professionals advise using a roller with a surface made of natural, not artificial leather. Such a roller has a longer operating period.
Pile tools. The surface of the rollers is made of natural or artificial fur (as in the photo below). The final result of finishing depends on the length of the pile - if it is short, the surface will be smooth. When choosing such a tool, you should pay attention to the quality of the fur. If hairs fall out of it, they will settle on the surface, which will spoil the appearance of the finish.

There are also foam, foam, and fabric tools, all of which create texture on the wall.

According to the type of pattern

According to the type of final pattern on the surface, the tools are classified as follows:

Textured rollers. Such devices create an imitation on the surface natural stone, fur, leather, etc. The relief depends on the surface of the roller. For example, for marble, a tool with a leather base is used. Textured plaster, applied with a roller with a long pile surface, creates a “fur coat” relief. To obtain a convex pattern, it is recommended to use a tool on the roller of which there are recesses, and for a depressed relief, a roller with a protruding relief.
Structural tools. Such rollers are used to give relief to the coating. The pattern on the roller is clear, closed in a circle. Thanks to this tool, an effect is created on the surface. volumetric wallpaper. Video tutorials demonstrate that decorative plaster is applied with a structural roller on a prepared building base.

To size

Types of rollers by size:

short - roller length up to 30 cm;
medium - surface length 30-50 cm;
long - from 50 cm.

How to make a roller for decorative plaster yourself?

Roller manufacturing methods:

Wrap the rubber roller of the roller with a rope made of the same material. Turn the turns in a chaotic manner. To securely hold the tourniquet on the roller, fix it with glue. Such a roller will create an imitation of wood on the surface.
Roll a tourniquet from any fabric. Lubricate the surface of the roller with glue. Wrap the tourniquet around the roller. With such a tool, an imitation of wood is also created on the surface.
Apply glue to the roller. Wrap a single piece of fabric around the roller. Such a tool will create a textile texture on the surface.
Cut out the elements of the future pattern from the foam rubber. Apply glue to the pieces and fix on the roller.
Spread with glue polyethylene film or any grid. Stick the material to the surface of the roller.

Material application rules

Textured plasters applied with a roller create unique reliefs on the surface. To achieve the best result, experts advise adhering to a certain work algorithm.

Preparation of the building base

Free the base from the old coating. To make the work move faster, the masters advise using special liquids and solutions. After dismantling the wallpaper or paint, tap the building base with milk for hidden defects. If differences are found, cut off the irregularities. Then degrease and dust the surface. Apply primer to the walls. Fill all defects with putty. After that, apply the material to the surface. Wait for complete drying, clean the base and prime.

Solution application

There are several ways to apply decorative plaster with a roller. The choice of method depends on the tool used and the final finishing result.

Applying the solution with a textured roller:

Pour the solution into a special cuvette. Immerse the roller in the agent, wring out excess material.
From top to bottom, apply plaster to the wall. Do not change direction for the following treatments. Do not tear off the roller from the base until the end of the run. If it moves away from the surface, the drawing will fail. Press the tool against the wall not too hard, but not weak.
Apply the next strip close to the previous one. Do not apply material spacing or overlapping.
Textured plaster with a roller is applied in one layer. For this reason, the thickness of the material must be the same in all areas.

Algorithm for applying plaster with a structural roller:

Apply the working material to the surface. It is recommended to use a spatula for this.
Wait until the product hardens a little. Do not use a structural roller on liquid putty. The tool will not leave a mark, as the composition will clog the pattern on the roller. It is also impossible to wait for the complete solidification of the composition. On a hard surface, the drawing will not work.
Fix the roller on the wall under the ceiling, press its surface and lead down without tearing it off the base. Try to make sure that the pressure is the same throughout the area.
Make the next stripe of the pattern close to the previous application. The drawing above should begin with such a fragment as in the previous processing. Do not allow discrepancies, otherwise the pattern will not work.
After the relief is completed, paint is applied to the surface if a solution without color was used. To do this, wait until the material has completely solidified. After that, paint the surface.

Instructions for applying two-color plaster:

apply one-color plaster to the surface - this will be the main color of the coating;
prepare a solution of medium consistency and mix the product with color;
Use a roller with a soft roller to apply the solution to the surface with chaotic movements.

The video in this article demonstrates how to properly apply decorative plaster with a roller.

With the help of a roller and decorative plaster, patterns are created on the surface that amaze with beauty. The main thing is to follow the rules of work.

home > ISO classifier