Update the kitchen set with your own hands. How to improve the interior of the kitchen without special costs and global alterations? Modern furniture decoration options

You can update and significantly improve the kitchen set without significant investment yourself. If the kitchen furniture is already "breathing its last", do not rush to get rid of it, because if you have the desire and the subsequent application of certain efforts, you can make a "candy" out of it.

We bring furniture in order with our own hands

Repair of a kitchen set should be divided into several stages:

• repair of cabinets and replacement of hinges on the doors;
• thorough cleaning of furniture from dirt;
• degreasing surfaces;
• decorating the facade and countertops in the most appropriate way (with self-adhesive tape, varnishing, painting, decoupage technique or other similar methods).

Rehabilitation of kitchen furniture, of course, always begins with the removal of all the contents of the cabinets. In order to improve the overall appearance of the furniture, it is advisable to completely reassemble it or, at a minimum, tighten it in all necessary places. It will also be quite useful to lubricate all the loops, remove the creak and other extraneous sounds.

If we are talking about a set of natural wood, such furniture is likely to be better preserved than its MDF or chipboard counterparts. This is due to the fact that wooden furniture does not deform over time, but only becomes covered with scratches and other flaws, which are easy enough to get rid of.

Sanding wooden furniture elements

How to update an old wooden kitchen set, breathing new life into it? High-quality wooden furniture is worth a little "confusing" and thoroughly tidying up its appearance. The surface of wooden furniture lends itself perfectly to banal grinding, which removes roughness, chips and other defects, and such manipulations do not require either expensive tools or rich experience. This can be done with sandpaper or scrapers, a metal rectangle with a cutting edge.

Some people think that grinding cycles is difficult, someone does not even imagine this tool “in the flesh”. In fact, this ordinary scraper and getting used to working with it is as easy as shelling pears. The tool is taken with both hands and translational movements are made in the direction of the wood fibers. Upon completion of rough grinding, the surface of the wooden elements is brought to an ideal state with sandpaper.

Upon completion of the work, the surface is coated with a primer to give the treated furniture water-repellent qualities and better adhesion for subsequent work.

Subsequently, the furniture is opened with varnish to give gloss. The lacquer coating also reliably protects the wood from unwanted insects, mold and mildew.

The technique of applying varnish is no different from painting. This is done with a regular brush and wood varnish.

Pasting the facades of the headset with polyvinyl chloride film

Restyling kitchen furniture with self-adhesive film can also be called one of the most popular methods today, since updating kitchen cabinet doors in this way is very easy.

A distinctive feature of the method is its simplicity and accessibility. In addition, the colors of the PVC film can be very different: from imitation of natural materials (such as wood or marble) to bright abstract patterns. Self-adhesive film is not afraid of water and is easy to clean, so it is a successful new "clothes" for kitchen furniture.

Stages of work with self-adhesive film

In order to update kitchen furniture and improve its appearance with self-adhesive film, it is necessary to proceed carefully and skillfully. The stages of work here will be as follows:

• prepare the surface;
• cut self-adhesive film;
• carefully glue the material.

Before you start pasting the facades of kitchen furniture with a film, you need to prepare the surface. This stage involves a thorough cleaning of surfaces from any type of contamination. If, after the preparatory work, the surface of the furniture has roughness, it is advisable to putty it before pasting it, making it smooth - otherwise the end result may result in disappointment. Hardened putty is cleaned with fine sandpaper.

Correctly cutting the film is also a very crucial moment. In order to achieve clear, even lines, first, on the reverse side of the material, they make the correct markup, it will be most convenient to cut pieces of the required size along it.

In order to avoid errors when gluing a PVC film, you should study the recommendations for its use, which can be found on the package. In addition to tips, there is a detailed step-by-step description of working with this type of material. When starting to stick, first separate the protective paper from the film, then calmly and smoothly apply the material to the surface, smoothing it from top to bottom. You need to move gradually, all the time getting rid of accumulations of air, expelling it outward (by analogy with wallpaper).

If something went wrong, the film can be immediately removed and re-glued in the right way, however, it is better not to bring it to this, since problems may arise when tearing off the material. In addition, this should be done immediately, because after a couple of hours the decorative material will completely “grab”, and then you will have to clean it off and do everything over again. If in the process of work it was still not possible to get rid of obsessive bubbles, you can correct the situation with a needle, piercing the place of air accumulation and gently smoothing it out.

Furniture painting

You can also update the furniture in the kitchen with paint. Painting kitchen furniture with your own hands is a simple matter. If a decision is made to reanimate furniture using this method, then you will need:

• primer;
• clean rag;
• several brushes (angular, regular);
• roller;
• dye.

Work begins with dismantling furniture and removing doors from cabinets. At the end of the work, the hinges and fittings can be replaced, which will also benefit the furniture. Then all surfaces are cleaned of dirt and old coating, if necessary, sanded with fine-grained sandpaper. To achieve a perfectly even and smooth surface, the primer is applied several times at intervals of 6-8 hours. After complete drying, you can start applying paint, in one or more layers.

Decoupage of kitchen furniture

Creative people may want to decorate old furniture in the kitchen with decoupage technique, which involves decorating facades with various applications and patterns.

For work you will need:

• materials for the application (beautiful napkins or magazine illustrations);
• scissors;
• flat brushes (thin and wide, for applying varnish and glue);
• special glue for decoupage;
• masking tape;
• glossy, matte or acrylic varnish;
• acrylic paints.

If the surface of the furniture has already been cleaned, it is enough to degrease it with alcohol or glass cleaner. Next, pick up a brush and begin to cover with white acrylic paint the place where the application will be located. This procedure is desirable for a more expressive look of the picture, but it can be skipped. Then they prepare and cut out pictures that will decorate the furniture. As a basis, you can take napkins or photographs. Having cut out the pattern of the desired size, the lower layers are separated from it, after which the upper one is applied to a previously prepared place on the furniture, applying a layer of varnish, transparent acrylic or ordinary PVA glue on top of it. Thick paper, on which the pattern is applied, can also be thinned on the reverse side with fine-grained sandpaper. When the applied appliqué is dry, the work is perfected by applying paint on the border between the appliqué and the furniture. This is done with a sponge dipped in paint. After the paint has dried, it is important to fix the pattern with a matte varnish, which should be applied in 2-3 layers, with intermediate drying. This technique will help to finally level the surface and make it smooth.

Remodeling a kitchen is almost the same process as remodeling, only easier and less expensive. It is not always financially possible to purchase new furniture, household appliances, change the decoration of walls and ceilings. And sometimes you just don’t want to part with the old, but such beloved and good things. Then experienced designers come to the rescue, who will help radically update the interior at minimal cost. How to remake a kitchen set with your own hands, how to transform a kitchen in the shortest possible time?

New life for an old headset

Furniture in the kitchen is subjected to serious tests: grease stains, soot deposits, temperature changes make the suites quickly lose their original attractiveness. In addition, headsets are used more often than other furniture, because a woman spends a third of her life at the stove for cooking. The kitchen is also loved for the fact that it is here that the family gathers at the same table, guests, friends and relatives come. Every housewife wants to feel at her best, so a sloppy interior, peeling paint, chips and cracks bring only grief. You can correct the situation with the help of external renovation of the interior. For the kitchen, do-it-yourself furniture alteration can be carried out in the following ways.

Facade painting

If the old kitchen is technically quite suitable for further use, then as an alteration, you can simply refresh the facades by painting. Experts recommend choosing a car enamel that is resistant to mechanical damage, not afraid of moisture, sunlight and temperature changes. You can also take acrylic or alkyd paint, but its duration is much shorter. Before starting the alteration, it is necessary to remove the facades, number them (for further convenience during assembly) and unscrew the fittings. Handles, hinges, it is recommended to hold in a solution of water and soda, and then wipe with a solvent.

From an old kitchen set made of wood or veneer, the previous coating should be removed: varnish or paint. To do this, it is necessary to grind the surface with sandpaper: first coarse, then fine-grained. If there are cracks, they need to be puttied and the surface leveled. After that, the facades should be degreased with a special solution and allowed to dry.

Now you can start painting furniture with your own hands. Experts say that spray paint lays down more evenly, but this opinion is controversial. An ordinary paint brush will also do the job if the paint is applied in one direction. It is advisable to make 2 layers - then the color will be uniform, without pale spots. You can also use stencils to decorate facades with original patterns or designs. After complete drying, the fittings are screwed to the doors, and the parts are put in their original place. Such a renovation of the kitchen will refresh the interior, make it more stylish and modern, in addition, the price of a liter can of paint usually does not exceed 500 rubles, and car enamels - 1000 rubles.

Self-adhesive film

Vinyl wrap is a simple and budget option for remodeling a kitchen, the old surface of which can be either wood or plastic: self-adhesive will work in both cases. Before you start reworking furniture, you need to measure the dimensions of the facades in advance and purchase a film with a margin so that you can correct possible errors.

Facades must be removed from the headset, numbered, laid out on the floor or on the table. Having measured the desired piece from the film, it should be applied to the edge of the surface and, carefully removing part of the protective coating, glued to the facade. Further, the film is gradually scrolled and attracted, simultaneously leveling with a spatula or a dry rag. If bubbles form during the pasting process, they can be pierced with a needle. In case of unevenness, the film can be peeled off and leveled, but this should be done no more than once, otherwise it will quickly peel off from the kitchen unit. After a few hours, the facades can be put in place.

If the appearance of the kitchen after the alteration fully complies with the stated requirements, it is recommended to install new fittings for the convenience of further use. Old broken handles must be unscrewed with a screwdriver or screwdriver and go to a construction hypermarket or market. There, the part should be shown to the sales consultant - and he will quickly select a suitable analogue.

The same goes for hinges, fasteners and other mechanisms. If the holes for the screws and the grooves have become too wide, chips have formed on the surface and the fittings do not hold, it is recommended to restore the furniture with your own hands. All holes can be easily repaired with putty. When it hardens, any screw or nail will easily fall into place and will hold firmly there.

Appliances

After altering the kitchen furniture, you can pay attention to household appliances. It is very good if it is built-in and hides behind the facades of the headset. Although the stove that is used most often is usually in plain sight, especially if it is gas. Before alteration, it should be thoroughly washed, removing all possible contaminants. Chips and scuffs can be repaired with heat-resistant paint. A very original solution would be to harmoniously combine it with a headset.

As for the refrigerator, it can be pasted over with a vinyl film. Of course, the new design of the alteration will not last long due to the instability of the material to mechanical damage, but at least every month you can change the appearance of the refrigeration unit. Auto enamel is more resistant, especially in a can. When staining, it is recommended to choose apricot, peach, white, light gray shades.

By the way, the vinyl film can be ordered according to the photo you like, then the refrigerator will acquire an original and unique design.

Finishing work

Remodeling a kitchen with your own hands is a simple and even exciting process, especially if all family members are involved in the work. It is better to entrust the replacement of electrical wiring, global redevelopment and transfer of communications to professionals, and you can refresh the interior on your own with the help of wall decoration. To do this, it is necessary to remove the old coating, putty, level the walls and cover with new paint.

If it is not possible to make the surface perfectly flat, ordinary wallpaper will help hide minor defects. It is recommended to paste over a free bare wall with photo wallpapers with a 3D effect. Any room, thanks to a drawing with a perspective, will only increase in volume. It is noteworthy that coloring, along with leveling, costs about 3,000 rubles, so this rework option is very economical. Split or cracked old tile? There is no need to remove all the old coating when it is enough to replace only the section that has failed.

• Doors to the kitchen can be refreshed with staining. To do this, it is necessary to clean the canvas and apply a new paint, which will be combined in color with the interior. Another interesting option is wallpapering. They will adhere perfectly to the PVA glue. You can also upholstery with faux leather. Glass sliding doors help save space. The roller sliding mechanism will allow the canvas to hide along the wall.
• Old wooden frames do not have to be replaced with metal-plastic glazing. To insulate the kitchen, it is recommended to install a conventional sealant. Thanks to such sealing, the room will become more comfortable, drafts will disappear.
• Chairs usually need reworking too. Due to frequent use, the base loosens, making the item unstable and flimsy. Replacing the fittings will help restore the original condition. First you need to tighten the bolts, if desired, replace. The old foam lining is recommended to be updated, the same goes for the upholstery. Using a hammer, nails or a construction stapler, the fabric is stretched and fixed from the underside of the seat. You can also make your own removable chair covers. The wooden stool needs to be sanded and painted.
• An old chest of drawers can also be used as an additional work surface or storage space. A new countertop will help to give it a stylish look. The surface can also be updated with staining or decoupage technique. A new tablecloth will help hide defects.

Show your imagination and do not be afraid to combine - for example, you can paint only the frames of the facade, and paste over the inserts with a film, or add decor to the painted cabinet doors

Woodgrain inserts and painted front frames

Renovating and restoring an old kitchen is not such a hard job: it only takes time, desire and a creative approach. You can take interesting ideas for arranging housing from the Internet or magazines. But, no matter what the result is, the kitchen will become fresher, more fashionable, and most importantly, more exclusive.

Video: how to paint the facades of a kitchen set yourself.

Video: how to paste over facades with self-adhesive film.

Furniture in the kitchen is constantly exposed to various influences related to the peculiarities of the operation of this room. Drops of water, heated oil, detergents fall on its surface, condensate settles due to a change in temperature in the room. These factors lead over time to the loss of objects of their original appearance. In such a situation, the owners can solve the issue radically by buying a new set, sigh and lament, looking at the peeling products, and restore kitchen facades.

Restoration of the coating, carrying out simple repairs can be done independently at home. If you spend a little of your own time, show your imagination, then even with minimal investment, you will be able to update a damaged, unpresentable, outdated thing that will serve for more than one year. These actions will save the family budget, gain invaluable experience, and explore various ways and methods of restoration activities.

Types of kitchen facades and their features

The facade design is a base lined with a decorative coating. Performance characteristics depend on the base part, the finish protects the base, decorates the product. The front side of the kitchen set is responsible for the general view of the interior of the room. There are many varieties of these elements, which are divided into two basic types according to the device:

1. Framework. They are a combination of two materials, one of them fills the middle of the canvas, the second serves as a frame.
2. Solid. Cabinet doors are a single plate without seams and joints.

According to the way the doors open, they are divided into:

• swing;
• folding;
• with a lifting mechanism;
• sliding.

Base material:

• Chipboard. The most budget option. It has good resistance to mechanical stress, but outwardly loses to other building materials.
• MDF. Differs in good indicators of durability, is applied at production of curved designs, has a smooth surface.
• Natural wood. The traditional raw material used in the production of most models had no alternatives before. This is the most expensive and high-quality product that has a beautiful natural pattern.
• Glass. Basically, triplex or hardened versions are used in production. It can be transparent and matte. The ends are edged with an aluminum frame.
• Metal. There are models made of stainless steel, aluminum. Characterized by durability, resistance to moisture.

Coating type:

• Enamel. Products are coated with special varnishes and paints.
• Plastic. Used for chipboard and MDF panels. Does not scratch, does not fade, is not afraid of moisture, chemicals.
• PVC films. Increase such characteristics as resistance to mechanical damage, high temperatures, sunlight.
• Veneer. Differs in durability, ennobles furniture.

Ways to update and restore facades in the kitchen

It is advisable to carry out restoration work if the furniture is well preserved, has a strong frame, while the cost of repair measures does not exceed the cost of new products. Getting rid of old stains, removing, masking cracks and chips, replacing the cladding, you can transform the kitchen facade, which visually will not be inferior to new models.

You can restore an attractive appearance in many ways. For example, scratches can be easily painted over with a furniture pencil or hidden under decorative stickers, a damaged coating can be repainted or varnished. In some cases, it will be appropriate to combine different methods to obtain the best effect. Let us dwell in more detail on the most popular restoration options.

Decorating with interior stickers

Interior stickers will help mask minor local scratches, cracks, chips, indelible stains. They can decorate not only the facade, but also the walls of the kitchen room. They perfectly tolerate moisture, steam, temperature changes, they are easy to care for. Elements hold well on plastic, wood, veneer, MDF, chipboard, glass, metal.

The gluing process itself takes very little time, it is enough just to clean the surface of dust and dirt, degrease it. At the same time, stickers will help hide minor defects, and will also be a great addition to the interior of the room, giving a homely atmosphere a feeling of comfort and warmth.

If the wood, veneer is not painted, not varnished, has a heavily cracked coating, then there may be problems with gluing the elements. On such a surface, they simply will not stick. You can make a preliminary test using ordinary adhesive tape, sticking it on the furniture being restored.

Pasting with self-adhesive film

Along with interior stickers, vinyl films allow you to perform inexpensive repairs, for example, on a small Khrushchev area. They are resistant to moisture, do not fade under the influence of sunlight, do not lose their color over time. The average service life is 3 years. When caring for them, it is recommended to use a soft cloth and soap solution, as abrasive substances and mechanical friction will damage the material and it will have to be restored.

Gluing the product to the facade is simple. Accessories are removed from the surface selected for restoration, it is thoroughly washed, cleaned of grease and plaque, degreased, and dried. At this time, the film is being prepared. It is cut out with a margin of 2 cm on each side, taking into account the bends. After that, a part of the protective layer is removed from the sticker, it is pressed with the wrong side and glued to the door, straightening and smoothing with a spatula. Places where air bubbles have formed can be pierced with a needle.

If something went wrong during the work, a bevel occurred, the material can be immediately detached from the surface and re-glued, but no more than 2 times. Full setting occurs after 5 hours.

Coloring with chalk paint with a detailed master class

Updating the kitchen facade can be done by painting. This is one of the best ways to restore and completely change the color of the product. Restoration should begin with preparatory work: doors are removed from the cabinet, shelves and drawers are removed, fasteners are checked, broken elements are replaced with new ones.

• kitchen set;
• film, masking tape;
• screwdriver;
• sandpaper;
• chalk paint, primer, varnish, degreaser;
• brushes for applying paint, rubber gloves.

Surface preparation

The first step is to remove the accessories and decorative elements. After that, all parts are thoroughly washed and degreased. There should be no dirty spots on the surface. If there are glasses on the door, they must be protected from paint with masking tape.

Usually there is no need to grind the facade, remove the old coating from it. In some cases, when the paint is peeled off, applied in a thick layer, it is better to scrape it off with a knife, or use special removal tools. After the top it is necessary to wipe with sandpaper to roughness, clean from dust.

Sanding or priming

Manufacturers of chalk paint on the packaging write that before applying it, there is no need to putty the surface, remove the old layer of paint from it. But in practice, especially in the presence of defects, these actions cannot be dispensed with, otherwise the flaws will be visible on the painted facade.

It is better to apply an alkyd primer in two layers. Before covering the next layer, the first one must dry completely. This process takes up to 12 hours. On top of each layer, after it has completely set, you should walk with fine sandpaper, which will ensure the best adhesion of the material.

Coloring

Designed by Annie Sloan, chalk paint is great for refining furniture. It is chalk dissolved in water, mixed with various additives, but the original recipe is kept secret. When applied, a patina is formed, it gives the object a unique look. This is the best choice for a shabby chic interior.

Using a brush, roller or sponge, the first layer is applied. At the same time, it must be remembered that, unlike other painting analogues, if stripes remain during painting, then the facade will eventually have a striped appearance. The paint dries within one hour. Experts do not recommend speeding up the self-drying process, for example, using a hair dryer. Before applying the second layer, sand the previous one a little.

We process with varnish

The painted surface after drying is covered with a layer of varnish. For these purposes, you can use polished or acrylic options. It is also applied in several layers, sanding the first one. The second is not overwritten, otherwise the product will not be smooth.

Instead of a lacquer coating, the attractiveness of the facades can be restored with wax. It is applied to the dried surface with a soft brush, sponge, textile. After 15 minutes, it must be rubbed into the surface with a cotton cloth, without pressing on it. After the facade dries, it will become smooth, a satin sheen will appear.

Return of fittings and facades to their places

After the facade has completely dried, it is inspected for the presence of thick spots of paint, minor flaws. When they are found, they are cleaned or eliminated. Next, masking tape is removed from the glass, decorative elements and accessories are installed in their places.

After making sure of the strength of the frame, prepared doors are attached to it. Using a screwdriver, adjust the position of the element, align. At the final stage, the performance of the fastening mechanisms is checked.

Decoupage

An old kitchen set, which has already fully served, does not have to be changed to a new one. It is enough to revive its facades with the help of decoupage. If the internal hinges, fittings are in working order, they can not be changed. The work will not take much time, in a day, updated with all kinds of pictures of the door, I will delight the owners.

First of all, it is necessary to remove the facades and wash well. It is necessary to get rid of stains and dried drops of fat. Now we wipe the surfaces with alcohol for better adhesion with adhesives. All cracks and chips must be treated with sealant.

At the next stage, we measure all the details and transfer the numbers to paper, cut out the pattern. You can independently transfer a drawing to a sheet or choose the right one, reprint it in a printing house, photo salon. We cut out the finished picture and proceed to decoupage surfaces.

Dip the workpiece in warm water for a few minutes. While the paper is softening, apply glue to the surface. We transfer the decor to the door and smooth it with a roller, carefully expelling air bubbles. After 12 hours, the parts can be mounted in place.

Varnishing

An excellent option for the restoration of facades made of solid wood, wood materials, MDF - varnishing. As with other materials, when reworking, work should begin with the preparation of surfaces. If there are shallow chips, cracks, they should be puttied with a special composition for natural materials and cleaned well. For ease of operation, the headset doors should be removed.

Before applying the finish coat, the surface should be degreased and treated with a primer, stain. This will help protect the wood from moisture and other negative influences in the kitchen. After drying, varnish compositions can be applied to the surface. For reliability and greater shine, you can paint in several layers, reducing the volume of each subsequent one. After drying, we collect all the elements and place them in place.

The use of moldings and decorative overlays

You can give furniture a completely new design with the help of moldings and other decorative inserts. Facades can be restored using plastic, wooden linings. If the furniture has lost its beautiful appearance, it should be refreshed with paint before decorating. Do-it-yourself restoration takes place in several stages:

• Preparation - removal of doors, protruding elements, fittings. Cleaning of dirt, if necessary, removal of the old coating;
• Priming - processing with special mixtures, depending on the headset material and the type of finish;
• Preparation of overlays, moldings - the decor material must correspond to the type of surface. For plastic doors, plastic elements are chosen, wooden facades are decorated with appropriate details;
• Decorating - surfaces can be updated with rectangular planks, smooth or carved, with stucco imitation. They can simply be glued according to the intended scheme or with the help of clapboard nails;
• Painting - the mixture is chosen based on the material of the doors (natural wood, MDF, plastic). Apply paint with a roller or brush in several layers.

Restoration of the ends of the facades from chipboard

The front surface of a chipboard headset is often subjected to various damages. This can be paint abrasion, chips and scratches, defects in parts in the places of fittings and fasteners. Such damage can be easily repaired without dismantling the hanging cabinet with the help of wax crayons, retouching agents, fixing varnishes.

Most often, the problem occurs with chips at the ends. Melamine edging is used to restore these areas. Repair work takes place in several stages:

• Selecting a new edge of the correct size and color. It is necessary to measure the length and width of the end of the door, add a few centimeters for a margin;
• Removing the old edge. We heat the iron and apply it to the element;
• Cleaning up irregularities. To do this, you can use a chisel, fine sandpaper;
• Installation of a new cover. We apply a self-adhesive edge and iron it with an iron. When the glue hardens, cut off the excess with a knife, grind the joints.

Restoration of facades made of natural wood

You can update facades made of natural wood with self-adhesive films or varnish mixtures. Since it is not advisable to hide the beauty and naturalness of solid wood sets in an apartment, most restorers prefer transparent compositions.

Surface repair includes patching up areas with cracks with a special wood putty, sanding. If there are stains on the facade, they are cleaned with fine sandpaper. Particular care should be taken when working with carvings that have many recesses. The formed sawdust should be swept away with a brush and wipe the door with a damp cloth. Now the part must be degreased and treated with a primer. Lacquer is applied in several layers.

If the wood is swollen, jointing should be carried out, manually or on a special machine. Deformed doors from excess moisture are trimmed by removing excess. On shriveled doors, between which gaps appeared, special seals are glued.

Countertop restoration methods

Even the oldest kitchen countertop can be transformed and improved. For repairs, simple improvised materials are suitable. When choosing them, you should consider the style of the room. For example, decoupage will look great in the kitchen, especially if it is applied to the facades. Repair work should begin after full familiarization with the technological process. You can redo the tabletop as follows:

• with glass surfaces. The old coating is removed, the surface is cleaned and painted with paint in several layers. Then the tabletop is covered with prepared glass. By placing various photos, paintings under the transparent layer, you can create a three-dimensional effect.
• Decorating with tiles. Suitable for all shapes and sizes. It is better if the tile is not heavy, so as not to overload the structure. For decoration, you can use mosaics, broken remains of ceramic products. The main thing is to arrange the parts with a minimum gap.
• Decoupage. This method is suitable for laminated chipboard surfaces, but only if they will not be subjected to frequent washing. Suitable drawings are soaked with water and glued to the countertop, varnished on top. In the same style, you can transform an apron.
• Screen painting. The sanded tabletop is covered with paint of any color for the background, then the pattern is applied through a stencil. So that the countertop does not quickly wipe off, it is varnished.

How to fix a burnt spot on a table or countertop

The most common problem encountered with countertops is inadvertent burns from hot dishes. Since the surface is affected quite deeply and extensively, such a defect cannot be masked with the help of retouching agents.

First you need to prepare the affected area for restoration. It is necessary to remove the blackened layer of varnish as much as possible. We paste over the hole around the perimeter with masking tape and moisten the cinder with a solvent. After 10 minutes, the coating will soften and it can be removed with a spatula. You can also clean the area with a milling cutter.

The resulting recess is filled with softened putty in small portions, gradually tamping. Remove excess material with a knife and grind. The treated area must be varnished in the most suitable color, trying to reproduce the texture of the rest of the table.

Conclusion

Restoration is the fastest and most affordable way to improve the appearance of kitchen facades. You can repair any part of the headset in various ways. Self-updating furniture has a lot of positive aspects. The main advantage is the ability to create a unique interior, to bring to life the most daring ideas.

Do you want something new and fresh in the interior of the kitchen, but you don’t want to start a global renovation? A great option is to decorate an old kitchen so that the room sparkles with new colors. From this article you will learn how to transform the interior beyond recognition at low material and labor costs. All you need is a little imagination and materials at hand. Go!

IDEA #1

An option from the “cheap and cheerful” category is to use a self-adhesive film. This relatively inexpensive material, after simple manipulations, will change the furniture beyond recognition. The stores offer a large selection of such films: they are one-color or with bright unusual prints, they can imitate any material: marble, tile, wood, etc. See what a wide choice you have before you? In addition to decorative properties, high-quality film is also valued for something else: it is moisture resistant, not afraid of temperature effects and mechanical damage. Thanks to this, it can be glued not only on the facade of the kitchen, but also on the countertop.

Renovating an old kitchen this way won't take long. The list of necessary tools is not so big, if not tiny. To restore beauty, you will need the material itself, scissors and a ruler. By the way, some companies put a grid on the paper on the back of the film, so you can cut it perfectly even. If global changes are not needed and you just want to refresh the look of the room, then you can purchase vinyl stickers. They can be glued to any flat surface: kitchen facade, refrigerator, table, apron. Manufacturers offer different themes for stickers: it can be delicate flowers or funny images of animals.

IDEA #2

The most obvious option for remodeling an old kitchen with your own hands is to paint it. A new color can give furniture new life. Be sure your guests will think you've got a brand new headset! An option for the brave is to combine several colors, then the changes will be dramatic.

IDEA #3

How to restore an old kitchen with other materials, ceramic tiles for example? This is a stereotype that it can only be on the wall. Such material will look great on the kitchen facade! The tile can be the same as on the apron - if you do not know where to put the leftovers after the repair. Then the motifs on different surfaces will overlap, and the kitchen will become very harmonious. Otherwise, you can play on contrasts and decorate the doors contrary to the general style of the room.

How to do this trick? It's simple: remove the doors from the hinges, clean their surface, paint if necessary. The tile is attached to the facade with a special adhesive. If the pattern does not seem self-sufficient to you, then you can frame the tile in a frame of decorative molding.

IDEA #4

If the methods described above do not suit you, then you still have to violate the integrity of the furniture. We offer to make a new one from the old kitchen with the help of new doors. Of all the proposals, this option is the most expensive, however, the result will be more noticeable. In any case, it will cost much less than buying a new headset. If the model of your kitchen is quite popular, then it will not be difficult to find its facade. If such furniture is out of fashion or was not very common at all, then you will have to look for or order doors. Fortunately, there are a lot of companies that offer such services.

You can vary the cost of restoring an old kitchen. Cheap options: doors made of pine, plastic, chipboard. MDF or solid wood will have to be spent more seriously. The installation of new doors can be done by specialists from the same company where you ordered them. However, anyone who knows the word “repair” firsthand will cope with this simple task. Modern furniture is assembled, as a rule, quickly and effortlessly.

And a few more tricks on how to redo an old kitchen.

Trick number 1

Lazy Tip: You don't have to redo an old kitchen to make it look new. You can just take your eyes off the old furniture with bright accessories. Colored curtains, clocks, dishes - and all eyes are on them. However, keep in mind that if the condition of the furniture is very much in need of repair, then such a trick will not always be successful. Another nuance: kitchen cabinets should be neutral in color, otherwise the placement of accents will only make the interior unnecessarily colorful.

Trick number 2

Open shelves will lighten the interior of the kitchen. They also provide more options for design, because in this case the content of the shelves will set the tone for it. Beautiful dishes, original jars for storing cereals - and now the boring kitchen has turned into an island of brightness. To change the interior, just change a few items. Thanks to this, the room will not have time to bore you.

Trick number 3

Buy black or brown paint and paint over one cabinet or part of the door. And here in the room there was a place for notes. Here you can mark a list of products to buy or favorite recipes. Also, the surface will fit in order to leave a message at home. By the way, you can buy special vinyl stickers on which you can write with chalk. Then you won't have to mess around with paint.

Trick number 4

Who would have thought that simple handles could change the interior so much? It seems like such a small detail! But their replacement will be noticeable. By the way, long tubular handles are very fashionable now. They will turn even Soviet furniture into a modern set.

Trick number 5

If you want to follow the rustic style when remodeling the kitchen, you can replace the cabinet doors with curtains. So the interior will become more airy. In addition, it will be easier to get close to the dishes.

Trick number 6

Moldings are decorative three-dimensional elements that can turn an ordinary closet into an exquisite piece of furniture. It is attached with special glue.

10, 15 or even more years have passed since the purchase of kitchen furniture. Now she does not look as elegant, neat and pretty as she was at the very beginning. And ordering a brand new headset, alas, is still only a dream. There is nothing left but to refresh a little old, but such native furniture. Therefore, we decided to give you some interesting ideas by giving a master class on the topic "how to transform an old kitchen set."

Adhesive tape

Perhaps the easiest and cheapest way to give a headset a fresh look is to paste over it with a self-adhesive film. Fortunately, the assortment of high-quality film today is very, very pleasing: imitation of stone, wood, marble, tiles, leather, all kinds of rustic and more modern motifs - there are plenty to choose from! Thus, you can make your kitchen, although not exclusive, but very attractive.

Vinyl self-adhesive film has water resistance, good resistance to fading, temperature extremes and mechanical stress. So you can not worry about the durability of such a coating. Therefore, if you know how to handle a centimeter and scissors, then you will not have any difficulties in decorating.

The main thing you need is accuracy, patience and this instruction:

• Using a centimeter, we measure the kitchen set (sidewalls, facades, drawers).

Advice! For a more convenient and accurate measurement, it is better to remove the facades and put them on a flat surface.

• All fittings must be removed, and the headset itself must be thoroughly washed with a damp sponge. Pay special attention to removing fat stains. The surface for sticking the film must be clean, dry, even and smooth. Otherwise, over time, in problem areas, the film will begin to bubble and peel off.
• As a rule, on the reverse side of the film, a convenient centimeter grid is applied on the protective paper layer. Mark on it all the necessary dimensions of each part.

Important! Even if you are sure that you have taken all the measurements with high quality, it is still advisable to leave 1-2 centimeters in reserve. Therefore, in those places where bends are planned, add another 2 cm.

• Cut out all the details with a clerical knife along the ruler. Curved patterns are best cut with scissors according to the markings made in advance with a pencil.
• Now, having peeled off a few centimeters of protective paper, we apply the film to any part of the headset. The glued area must be carefully smoothed out with a plastic scraper in order to remove air bubbles and wrinkles from under the film.

Note! The film does not need to be glued all at once. Gradually remove the protective paper by 5 cm and smooth each pasted area with a scraper.

Small air bubbles can be pierced with a sewing needle, and large ones can be cut with a sharp knife and smooth the film. If the decorative coating lay unevenly, do not worry, this is fixable. Self-adhesive film does not stick completely until a couple of hours, so you have enough time left to peel off the film from a badly obtained area and stick it again.

• We repeat all the above steps with the rest of the kitchen set. For its greater transformation, you can make one more touch - change all the fittings.

Facade replacement

Want something more than just a self-adhesive film? Replace old facades with new ones! Of course, the price of the issue in this case will increase, but then you can not only decorate the old kitchen set, but also partially update it.

If you have a set of standard sizes, then it will not be difficult to purchase luxurious finished facades. For atypical and out-of-fashion models, you will have to buy facades on an individual order. Fortunately, today there are plenty of furniture companies that are ready to provide such a service.

Deciding on new kitchen facades, you open up a unique opportunity - to choose not only a fresh design, but also the material that is optimal in terms of cost and quality. Economical options include plastic, chipboard, and inexpensive wood (such as pine). But facades made of MDF and an array of noble trees - this is already a real prestige!

You can entrust the installation of brand new facades to specialists or install it yourself (on our website you will find a thematic video specially selected for you).

Decoupage

How to restore an old kitchen set? We completely forgot about such a fast, inexpensive, but very effective technique as decoupage! Its essence lies in cutting out beautiful compositions from various materials (paper, leather, fabric) and gluing them on the surface to be decorated. Let's try to create such beauty together, as in the photo!

Materials and tools

• We will need clippings from magazines, newspapers or paper with a printed pattern (it can be anything - it all depends on the style of the kitchen and personal preferences);
• Special glue for decoupage or regular PVA glue;
• Brush of medium hardness;
• Acrylic varnish on wood or plastic.

Step by step decoupage

• If your kitchen set has scratches, cracks or other defects, fill them with filler and let dry.
• Gently work the entire surface to be decorated with fine sandpaper to end up with a slightly rough surface. Decorated places can also be coated with a primer or acrylic varnish in a suitable color.
• Well, if the size of the sheet of paper with the image is large enough, then there will be no ugly joints. Don't have a large format printer at home? Do not be sad, because you can always order a printout of the desired size in the salon.
• Apply glue to the surface to be decorated and paper. The latter should be well saturated with glue.
• Now you can overlay the image on the surface and carefully smooth it with a brush or roller.

Important! Never do this by hand. Otherwise, wrinkles or tears may appear.

• When the paper is completely dry, cover it with acrylic varnish in 3-4 layers - this will protect your work from moisture and damage. Between applying each layer, observe an interval of 1 hour. By the way, acrylic varnish can be glossy or matte, so you can achieve any desired effect.

Finally

Well, now you know how to restore a kitchen set! We considered only a few options for decoration. But, it should be noted that self-adhesive film, facade replacement and decoupage are a real find for every housewife! After all, you can achieve a truly unusual decor only by combining existing techniques and imagination. Enjoy your creativity!