How to glue wallpaper in the corners - the secret to perfect gluing. How to glue non-woven wallpaper: step by step instructions

Rating: 3.67 (3 votes)

No matter how good the wallpaper in a roll looks, their place is in the decoration of the room, so you still have to learn how to glue vinyl wallpaper on a non-woven base.

But you should not be afraid - working with these wallpapers is very simple. Despite the relatively high cost, these wallpapers are not only in stable demand, but are also rapidly gaining popularity.

There are many explanations for this - among them there is also a “novelty effect” - after all, the material appeared on the market relatively recently, but there are also objective factors - the quality of the coating is quite consistent with the price.

Pros and cons of a combination of vinyl plus interlining

Formally, these wallpapers do not consist of two, but of three layers - the non-woven base carries two layers - opaque, designed to hide the color unevenness of the walls and decorative vinyl ().

A huge variety of textures (including those imitating other materials) and patterns of such wallpapers allows you to implement quite bold design solutions.

One of the main advantages of using a non-woven base is considered to be the ease of gluing. Although from a practical point of view, wallpapers have many other advantages:

• density and elasticity - allows the wallpaper to hide the defects in the relief of the walls, up to small cracks;
• tensile strength;
• resistance to abrasion and fading;
• durability;
• do not create problems during care - both dry and wet cleaning is acceptable;
• high level of noise absorption;
• no deformation - the wallpaper does not tend to stretch and shrink under the influence of moisture.

More often they are sold meter long - in this article.

Does this finish have any disadvantages? The main negative point is associated with the likelihood of obtaining a vapor-tight, and sometimes releasing harmful substances wall surface.

However, this is the only disadvantage vinyl wallpaper can be practically reduced to nothing, not forgetting to regularly ventilate the room.

Preparation of materials and tools

So, a very pleasant stage - the choice and purchase of wallpaper is completed. What else is needed to realize the idea of ​​decorating a room?

First, you need a special glue. It is desirable that it be specifically for non-woven coatings (Flizelin Premium, Special Non-woven).

And secondly, you should make sure that at the right time you have at hand:

• paint roller and flat brush (you can use several brushes different size) - for applying glue;
• rubber roller and wallpaper spatula - for smoothing wallpaper;
• a bucket of at least 10 liters - for the preparation of an adhesive solution;
• scissors and a construction knife;
• plumb;
• a few soft rags and sponges.

If the wallpaper has a regular pattern and there is a need to combine adjacent layers, then you can use a table for cutting right size, or you can cut and fit the wallpaper directly on the floor, of course, if you are sure that it is clean.

Pasting the room - the main stages

And now it's time to see in practice how easy it is to glue non-woven wallpaper (compared to paper, for example). Having decided to do it yourself, you should adhere to the algorithm:

Step 1 - preparing the walls for pasting

Not the most "clean", but an uncomplicated stage, including simple steps:

• , plaster and wallpaper. May be needed additional tools and tools: drill, hammer, special liquids to remove wallpaper;
• removal of wall switches and sockets;
• primer. Performs many tasks: leveling and lightening the color of the wall, giving strength to the putty (if it was applied), antifungal treatment of the wall. For non-woven wallpaper, you can use their “native” glue as a primer by preparing a solution of a weak consistency.

Leveling the cleaned surface. Non-woven wallpaper can smooth out bumps, but if there is a serious height difference of more than 1 cm,. If there are few irregularities, you can choose a more expensive and easy-to-use polymer putty;

Step 2 - marking the walls and cutting the wallpaper

It will be necessary to mark the walls in any case, but it is not always necessary to cut the wallpaper in advance:

• marking on the wall of the starting point. Start pasting from the edge of the window opening, it is there that you should draw a vertical line with a plumb line;
• wallpaper cutting. To do this, the height of the walls is measured, 10 cm of margin is added to the resulting value. It is this length that each cut piece of wallpaper should be;
• pattern matching. If the details of the picture need to be combined, then first you need to cut a piece from one roll, and then pick up a “pair” from the other for it. This will avoid unnecessary material consumption.

Good news for those who have purchased wallpaper with a chaotic texture, without an ordered pattern: they can do without preliminary cutting at all, gluing the wallpaper directly from the roll - the strength and elasticity of this type of wallpaper create the conditions for this pasting method. A small overlap is made on the ceiling, which is later cut off with a knife, and the bottom of the wallpaper is cut under the plinth or along it.

Step 3 - Creating the Finish Coat

Directly work with wallpaper and glue:

• adhesive preparation. The purchased ready-made mixture is diluted with water in accordance with the instructions. Important point- if you can’t exactly maintain the proportions, or you don’t want to, it’s preferable to make the solution thicker, i.e. put more powder, this will only improve the adhesive properties;
• applying glue. The non-woven base of the wallpaper allows you to make this stage as simple as possible - the glue is simply applied to the wall with a roller, you do not need to cover the wallpaper with it;
• gluing the first sheet. Regardless of whether the wallpaper is pasted in a separate piece or straight from the roll, you need to align the vertical edge of the wallpaper with the starting marking line. Start gluing from top to bottom, it is convenient to work with an assistant who will support a heavy canvas. Smooth with a roller or spatula from the center to the edge of the canvas, squeezing out air and excess glue, this will allow you to get a wall without bubbles;
• combining and gluing the second and subsequent sheets. All sheets after the first one are glued end-to-end to the previous one (with an approximate overlap, a gap of up to 1 mm is possible, which will disappear when smoothed), overlap is not needed here. The joints are ironed with a roller, it is better to remove excess glue as quickly as possible with a damp cloth or sponge.

In the process of applying the adhesive, it is important not to rush, not to save the solution and cover with it only that section of the wall where the wallpaper will be pasted right now. If it didn’t work out exactly the first time, then the wallpaper can be removed and re-placed without compromising the quality of the resulting coating.

As you can see, gluing these wallpapers correctly is not difficult at all. However, in any room, in addition to smooth walls, there are such “obstacles” as corners, baseboards, radiators and electrical outlets.

For glue application hard-to-reach places you can use a small brush.

It is better to start wallpapering in the corners, having acquired at least some experience, but if you don’t have it, then at least carefully read the following recommendations:

1. If the walls in the room are fairly even, and the corner is located so that it attracts attention, then the canvases are placed without overlap. To do this, the piece of wallpaper that is pasted first is wound around the corner with a margin of 2 cm. The next one is simply combined with it butt-to-butt.
2. If the walls and corners do not allow the wallpaper to lay down flawlessly, you can glue the first layer in the same way as option 1. Since the corner is uneven, the overlap will be different. Where it is narrowest, you should retreat from the edge of the wallpaper towards the corner by 1 cm. From this point, measure away from the corner a value equal to the width of the roll. Here draw a vertical line along the level, it will be the edge of the next layer of wallpaper. Thus, an overlap of about 1 cm is formed.
3. You can glue wallpaper in the corners using such a common and quite effective method as a double cut (undercut) corner. To do this, the strips adjacent to the corner are glued alternately with a large overlap - up to 5 cm. The wallpaper is carefully “imprinted” into the corner. Then use a rigid profile (ruler or rail) located in the center of the corner in order to cut the wallpaper along the line. After trimming, the excess is removed, and the edges of the wallpaper are smeared with glue and ironed with a rubber roller.

But what about sockets? It is advisable to turn them off (as well as switches) for the time of pasting and remove them together with the boxes.

Their locations should be marked with a cross, cut along the same lines and bend the resulting corners inward. The boxes can be returned to their places once the glue has dried.

To summarize the technology of wallpapering graphically, you can do the following:

Perhaps some of the features of wallpapering may seem difficult for a beginner. At the same time, we can make an unambiguous conclusion that it is easier to work with non-woven vinyl wallpaper,.

A wealth of textural and color solutions allows you to independently create a unique and integral design of the room, where the design of the walls will be in harmony with both the floor and ceiling finishes and the interior details.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

Under the heading | with labels |

Vinyl wallpaper is one of the most common materials for interior design today. Thanks to dense structure and good external data, they effectively mask the rough surface, completely transforming appearance premises. At the same time, the price of this product does not go beyond the availability, and the ease of installation makes it possible to carry it out independently.

Wallpaper of this type consist of two layers - interlining and polyvinyl chloride spraying. Interlining plays the role of a substrate, through which the wallpaper is glued to the wall, which makes them more versatile.

Thanks to the presence of a base layer, you don't have to wonder, “Can I glue vinyl wallpaper with non-woven glue?” - if the wallpaper is multi-layered, then you can safely apply it.

Note!
In some cases, paper can be used as the base layer - for these products, the use of non-woven adhesive is not always appropriate.

The polyvinyl chloride layer performs protective and decorative functions. This is a durable and moisture-resistant material that withstands wet cleaning without any damage, repels dirt and resists mechanical stress. Due to its structure, PVC can be covered with various patterns, either through embossing or hot forming, which give the wallpaper a unique texture.

In this article, you will be given detailed instructions about how to stick vinyl wallpaper on a non-woven base with your own hands. With its help, you can carry out this process completely on your own, without resorting to the help of professionals.

Wallpapering

Like any other construction process, pasting walls with non-woven vinyl wallpaper consists of several stages, each of which has a direct impact on the final result. For greater clarity, consider the gluing procedure in the form of step-by-step instructions.

Surface preparation

• It is necessary to clean the surface of dust, old wallpaper and other contaminants. It is enough just to carefully sweep the putty, and the plywood needs to be subjected to wet cleaning. When doing this, make sure that the sponge is not too wet and collects dust without leaving wet marks. After wet cleaning it is desirable to vacuum plywood;
• If there are cracks or voids on the surface, they must be puttied with a repair mixture, and then the treated areas should be carefully sanded. If a we are talking about plywood or drywall, then seams and recessed caps of self-tapping screws are subject to mandatory puttying.

Note!
When sealing the seams between the sheets, it is imperative to use a reinforcing mesh-serpyanka, which prevents the appearance of cracks.

• After carrying out these procedures, a continuous application of putty can be carried out, if necessary. In this case, the presence of minor structural defects is acceptable, the magnitude of which is calculated from the thickness of the wallpaper - the thicker they are, the higher their absorbing capacity. However, it should be noted that only a perfectly leveled surface will guarantee a high-quality end result;
• Before sticking non-woven vinyl wallpaper on a plywood base, it is necessary to process it, which reduces the sensitivity of the base to moisture. Impregnation also has an antifungal property - PVC does not allow air and moisture to pass through, which significantly increases the risk of fungus formation under the wallpaper;

Acquisition of glue

As mentioned above, if desired, you can glue vinyl wallpaper with non-woven glue - the result will be quite tolerable. If, for example, you have glue left unused from the last time, or you, for some reason, purchased a composition of this particular type, then this option will be quite appropriate and will not greatly affect the final result. This is due to the fact that the PVC layer is applied to the non-woven base, which lies on the glue as “native”.

However, if you are only going to purchase glue and are thinking about how to glue non-woven vinyl wallpaper, then it is best to give your preference to specialized compositions.

They are maximally adapted to the weight and multilayer structure, guaranteeing a high-quality end result. The preparation of both analogues is carried out strictly in accordance with the instructions from the manufacturer.

sticking

First of all, it is necessary to close all windows and doors to avoid drafts. Wallpaper and all the necessary tools should be brought into the room in order to open the door as little as possible. The movement of the air mass will cause an unnaturally fast curing of the adhesive, which will lead to the wallpaper moving away from the wall.

It is also necessary to turn off the heaters, air conditioners, central heating and only after they have completely cooled down, proceed to the gluing process.

Heating elements locally increase the temperature in the room, which will lead to uneven drying of the adhesive.

If they are not turned off, then next to them the wallpaper will dry much faster and peeling will occur in this area.

• Measure the height of the walls and add at least 10 cm to the result - if the wallpaper is with a plain pattern, then this length of the strips will be quite sufficient. If the pattern is complex and needs to be combined, then to this length it is necessary to add the distance necessary to match the pattern;

• Before gluing non-woven vinyl wallpaper, a vertical line is drawn on the wall using a plumb or level, along which the first segment will be pasted. Most often, wallpaper begins to be glued from the window, since this is the most noticeable place in the room, but this parameter is not mandatory;
• When gluing wallpaper of this type, the glue is applied directly to the wall - there is no need to coat the wallpaper itself. The first segment is glued strictly along the drawn line from top to bottom - in order to expel air and prevent the formation of air bubbles, the surface is ironed or with a rag from the center to the edges;

• Vinyl wallpapers are glued end-to-end - to make the joints as natural as possible, they must be rolled. Trimming wallpaper for shelf and floor plinths should be done with a clerical knife while the glue is still wet.

Outcome

Wallpapering is one of the easiest construction works which does not require any specific skills. Accuracy and observance of the subtleties of the technological part of the process will help you do it yourself without any difficulties. More detailed information on this topic you can get by watching the video in this article.

Pasting the walls with wallpaper - work that does not cause any particular difficulties. Such repairs have long become commonplace for many owners of houses and apartments. The most important thing is to correctly and evenly stick the first strip of the canvas, and then the strip to the strip and the wall is ready. Difficulties during the repair arise only during the pasting of the corners. Let's talk about the rules and features of gluing non-woven wallpaper in problem areas.

Types of corners in the apartment and house

Before, you need to explore the room. There are two types of corners, each requiring individual approach when facing interior spaces:

1. 1. Internal. There are such corners in every room; it is with them that you usually have to work when decorating interior spaces.
2. 2. External. Most often they are found in the corridors, and sometimes in the living quarters of houses and apartments. If there is a similar corner in the room, it is with him that largest number complexities.

When the room is explored, you can begin to prepare for repairs. In this article we will look at wallpapering on non-woven fabric. Currently, they are the most demanded finishing material for internal walls. Non-woven wallpaper is called paper lining, which includes interlining, which strengthens paper base, making the finish more reliable, attractive and durable.

There are also vinyl facing materials based on non-woven fabric. They are more resistant to external negative impacts, they can be used in rooms characterized by high humidity. Meter and ordinary non-woven vinyl wallpapers are glued in the corners according to the same pattern, so the instructions below are suitable for different options finishes.

Special attention when preparing for interior cladding, it is necessary to pay attention to the choice of glue. Often they take universal glue, which is suitable for all types of treated surfaces and for various wallpapers. But professionals recommend using specially designed adhesives for non-woven wallpaper. The following brands of glue are well suited for non-woven fabrics:

• Quelyd;
• KLEO Line Optima;
• Emcol Universal;
• Metylan Interlining.

Rollers will also be needed for repairs. It is best to purchase several rollers in advance: for applying glue to the wall, for smoothing the finish on the surface, as well as for working at joints and in corners. It is unlikely that it will be possible to use one roller for different purposes, especially if it is smeared with glue during operation.

For gluing corners vertical surfaces, useful tools such as: level, ruler, plumb line, scissors, trowel, trowel and others. It is recommended to prepare them in advance so that you do not have to be distracted from the ongoing repairs and do not waste time.

Where to start decorating a room?

Corners are considered the most difficult places to glue, not only because of their shape, but also because they are rarely perfectly even. If you paste over the walls butt-to-butt, then at the beginning of pasting from the corner, a strong vertical skew may appear. Many are sure that it is possible to avoid distortion if you start gluing from the window and door opening, mistakenly believing that in these places the walls are as even and perpendicular to the floor as possible.

Before you start gluing, you need to confirm that the window or door has no defects. You can do this with a simple plumb line. Very often, even such a simple study shows that the wall surface has significant flaws that can extremely negatively affect the quality of the cladding and the visual characteristics of the entire room after the completion of the repair work.

The very method of gluing from the window appeared due to the traditions of use paper wallpaper. Starting pasting from the window with an overlap and continuing to mount the canvas clockwise, you can achieve maximum invisibility of the joints. However, when using non-woven or vinyl facing materials, such a mounting system is not at all mandatory.

Professionals recommend starting wall pasting from the corner if at least one wall joint is fairly even. Therefore, it is necessary to investigate problem areas slope and start work from the corner that has the least disadvantages. A preliminary study makes it possible to know in advance the real evenness of the walls and choose the most suitable way cladding installation.

Pasting the inner corners in the room

Before starting work on facing the room, a decision should be made on the need for preliminary alignment of the walls. If the surfaces have many defects and a strong vertical deviation, they are pre-leveled with plaster or putty. This method of preparing for installation is especially relevant if you plan to paste over the room with expensive silk-screened wallpaper. If a preliminary training do not perform, in the process of work, a significant overrun of facing materials may occur.

If deviations in the corner are insignificant, defects can be hidden by overlapping pasting. This method is most often used in the design of rooms, as the owners usually do not want to spend time and money preparing the surfaces to be decorated. This method involves gluing the first strip of the canvas in such a way that it extends 3-4 cm onto the adjacent plane. It is possible to achieve ideally high-quality wall decoration using a high-quality adhesive composition, which needs to be smeared as carefully as possible on the corner and adjacent planes.

Pre-made on the wall vertical mark, along which one side of the glued segment is adjusted. A piece is applied to it and smoothed to the corner. Next, with the blunt side of a knife or a spatula, the canvas is pressed through the corner. This must be done as carefully as possible so as not to damage expensive facing materials. Next, a part of the segment is glued onto the adjacent wall and air bubbles are removed from under the material using a rubber roller.

Further, new segments are glued to this strip on both sides. Moreover, on the wall on which most of the glued strip is located, the next segment is fastened end-to-end, and on the adjacent wall, on which the strip has gone a few centimeters, the new strip is overlapped. Now it remains to draw a vertical line with a plumb line at the intersection of the wallpaper strips, after which a sharp knife is drawn along the entire height of the wall and two pieces of wallpaper are removed, as a result of which a butt mount is created.

How to glue the outer corner?

The repair procedure described above is almost repeated when pasting the outer corners. The first strip of material is glued in such a way that several centimeters of the segment are wrapped around the corner. Most often, to ensure high-quality fastening, you have to make several cuts on the segment, at the corner. Incisions will avoid wrinkles and remove excess adhesive from the wallpaper. Using a sponge or roller, the strip is pressed as carefully as possible to the surface, after which the strip is cut vertically with a knife so that no more than 1 cm of wallpaper remains on the adjacent wall.

The next strip of wallpaper is attached to the wall, where there is 1 cm of wallpaper. The segment is mounted in exactly the same way as the first strip, no more than 5 mm of wallpaper should go to the adjacent wall. At correct installation the place of attachment will be completely invisible.

Making corners in a room is not only the most difficult task when facing surfaces, but also the most important. The general visual characteristics of the interior of the room depend on how the cladding will look in these places. Therefore, repair work must be carried out very carefully, carefully and slowly. If you do not have much experience in cladding, it is recommended to start with areas of the room that are least noticeable and where cladding installation defects will not adversely affect the beauty of the room.

To date, non-woven wallpaper is increasingly being chosen as a material for interior decoration. Their popularity and demand is due to high functional characteristics. These wallpapers are much more reliable. ordinary wallpaper, so they do not tear, and are also not exposed to sunlight and have good sound insulation. In order to achieve a high-quality and durable result when pasting walls, you need to know how to glue non-woven wallpaper correctly.

Non-woven wallpaper is finishing material, which is applied when repair work for walls and ceilings. Such material is easy to care for and a wide range of choices. hallmark wallpaper of this type is a thickened structure, thanks to which, when used, it is possible to hide wall defects well. Such wallpapers allow you to make surfaces as smooth as possible.

Non-woven wallpaper is suitable for decoration in any type of premises with any surface. However, you should not forget that some varieties of this material can be with a thin base, so the color of the walls under the wallpaper can be seen through. In this case, before gluing, it is best to pre-paint the walls with paint.

Where to start - the choice of glue

Before you start pasting wallpaper, you need to choose the right adhesive. If you purchase a universal glue, then the result of pasting may be of poor quality, since when using non-special glue, the wallpaper may subsequently lag behind the walls.

For non-woven wallpaper, there is a special adhesive that meets all necessary requirements. Glue for non-woven wallpaper is of two types:

• for light wallpaper;
• and for heavy wallpaper.

Therefore, you need to buy glue based on which ones were chosen. If they are light, then in principle both types of composition will do, but if the wallpaper is heavy, then the first type of glue will not cope with them. Non-woven wallpaper must be glued with fresh glue, so in no case should you use the old glue lying around in the pantry.

Preparing walls for pasting with non-woven wallpaper

At the stage of preparation for pasting the surfaces of walls and ceilings, first of all, you need to take care of the availability of all necessary tools. For preparation and pasting, you will need the following items:

• level;
• tape measure, more than five meters long;
• roller and sponge;
• spatula made of plastic;
• a knife or special scissors to cut the wallpaper;
• a small metal spatula;
• 2 buckets to dissolve the glue, and collect clean water in the other;
• foam washcloth;
• wall pencil.

We prepare the walls and make the markup

At the first stage of gluing non-woven wallpaper, you need to inspect the walls for bumps and other defects, and then prepare them. These wallpapers adhere well to surfaces made of paper, wood, chipboard, concrete or. An important point: if the walls have an uneven color, then it must be leveled, as it will be enlightened from under the wallpaper. It is best to make the color of the surfaces closer to the shade of the selected wallpaper.

The stage of wall preparation begins with the dismantling of old coatings on the walls, as well as the removal of dust and bumps. If the walls were previously painted with paint, then they should be cleaned of it. Also old paint can be rubbed well sandpaper. Further, all surfaces must be carefully primed and allow time for the walls to dry. All those who are interested in how to glue non-woven vinyl wallpaper need to know that such material has smooth edges, so that such wallpaper can be glued using the "butt" technology. With this connection, the canvases glued next to each other look solid, without seams.

Basically, non-woven wallpaper is produced in large format - meter long. It is better to start pasting from the corners of the room and go vertically from them, which will help the level, at a distance of one meter. You need to make a markup along this path first. Marking must be done in any case, as this will help to adhere to vertical lines when pasting. Non-woven wallpaper has a standard width of 1.06 meters, so when pasting, a small margin in width is often made. This margin allows you to conveniently arrange the joints in the corners of the room.

Pasting non-woven wallpaper

For those who are interested in how to glue non-woven meter wallpaper It is worth knowing that the process of gluing this material is not much different from the process of gluing ordinary wallpaper. At the first stage, it is necessary to take time to prepare the surfaces, namely: to level the wall; putty the surface; .

The gluing process itself consists of the following steps:

• adhesive preparation;
• cutting the wallpaper into the desired stripes;
• applying glue to the surface of the wall or ceiling;
• gluing the wallpaper, cutting off the residue, smoothing the strips with a roller and then gluing a new strip.

Before finishing the room with non-woven wallpaper, it is necessary to properly dilute the glue. Often such an adhesive composition is presented in the form of a powder that must be mixed with water. To properly dilute the glue, use the instructions that came with the adhesive. If the mixing technology is violated, then the wallpaper may lag behind or air blisters may form on the material.

Having prepared the glue, you should cut the wallpaper into the desired parts. To cut off the strips that are correct in terms of parameters, it is necessary to measure the height of the walls on all sides of the room. Then you need to cut the wallpaper in such a way that in addition to the measurements there is plus five centimeters of stock. In the event that the selected wallpaper has a pattern, you need to match the cut strips so that the pattern remains intact.

Pasting the room should be done, starting from the corners of the room on any side. Previously, on the wall you need to make the appropriate markings in the form of vertical lines. To markup you need a level. The lines are necessary in order to exactly dock each strip with each other. Glue is applied only to the surface of the wall, while the wallpaper itself does not need to be smeared. You need to apply glue only on that part of the wall on which the strip will be glued, if you miss further, the glue will have time to dry.

When gluing the strip, you need to ensure that it does not protrude beyond the drawn line. It is important to ensure that the wallpaper lies flat, and for this you need to use a roller or sponge to smooth it. The roller must be carried out from the central part of the strip to the edges. After that, you can start gluing the next part of the wallpaper by attaching it to the junction of the previous strip.

Non-woven wallpaper is distinguished by the fact that after pasting they do not shrink, so that even after they have completely dried, the stripes do not diverge. Excess glue that protrudes at the joints can be removed with a wet sponge. This must be done without fail, otherwise if they are painted, then at the joints due to glue there will be a slightly different color.

Sticking non-woven wallpaper in the corners

In the corners, non-woven wallpaper should be glued using a different technology. First of all, it is necessary to measure the width of the wall surface in the place where the corner of the room is and make sure that the wallpaper strip goes around the corner by one centimeter. Next, you need to grease the surface of the wall with an adhesive, glue a strip of wallpaper and level the surface either with a sponge or a special roller.

The next strip must already be glued with an overlap. With this method of gluing, slight folds may appear, but they need to be slightly incised so that air does not remain under the wallpaper. After the incision, the surface can be leveled. When decorating walls with such wallpaper, sometimes you may encounter difficulties in the area of ​​\u200b\u200bthe outer corners. In order for the wallpaper to be glued correctly, the gap between the already glued strip and the ledge is measured. Then you need to add another 2.5 cm to this value.

After that, smear the surface of the wall with adhesive and glue the sheet so that it wraps around the corner. The next canvas can be glued end-to-end, but only if it can be done evenly. After gluing the sheets, you need to arm yourself with a sharp knife and cut off the extra parts from the walls that form under the plinth. The corner of a room when wallpapering is the most difficult place, especially for those who have never experienced wallpapering. If you understand the execution technology, then pasting the catch in the room will not cause difficulties.

How to glue non-woven wallpaper video wide

What wallpaper to choose? Paper, vinyl, non-woven or maybe liquid wallpaper to use for decorating walls? Surely everyone has asked this question at least once in their life. To make a choice, you need to understand what the difference is. Everyone has been familiar with paper and vinyl for a long time. Let's figure out what is the peculiarity of those that are non-woven based.

Interlining is a material that has long won its place in textile industry. It is added to the composition of fabrics to give them strength. In wallpaper, it has the same function: to make it durable, resistant to stretching. Huge selection colors, textures, ease of sticking makes this product more popular from year to year. An indisputable advantage is big choice among the wide, so-called meter, models.

Preparatory stage

To properly glue non-woven wallpaper, you first need to prepare the required inventory, materials and surface.

Inventory preparation

Of the tools you may need:

Important! It is better to use a paint knife with a wide blade. A small clerical knife will do a worse job of trimming extra pieces. You should not feel sorry for the blades, it is better to break them off more often, because the quality of the cut directly depends on the sharpness of the knife.

• plumb, level, pencil. These tools are used to mark the location of the first sheet of wallpaper;
• bucket or any deep container. Useful for dilution of glue;
• plastic spatula, brush or roller. Required for smoothing wallpaper.

Surface preparation

To begin with, from the surfaces that you are going to paste over, you need to remove the old wallpaper, clean the walls and ceilings from dirt and dust. For better removal of old coatings, it is better to wet them with water using a roller or spray gun.

Surfaces for pasting with non-woven wallpaper or on a non-woven base do not need to be carefully leveled. Cloths on this basis are quite dense and hide many irregularities due to their texture. Therefore, it is enough to simply embroider and putty the cracks and even out the largest differences. Special attention should be paid to the corners: their better side do not bypass. Since non-woven wallpaper is cut at the corners, the main task is to make the latter straight and even.

Special attention should be paid to priming surfaces. The primer creates a film that reduces the consumption of glue and improves the adhesion of the wallpaper to the wall.

Note! It is more profitable to use a concentrate primer, which must be diluted with water before use in accordance with the instructions on the package.

Preparation of materials

Glue must be purchased strictly for non-woven wallpaper. Composition for paper or vinyl will not work. Wallpaper glue is sold ready - in buckets, or dry - in packs. Ready glue just mix and start gluing, and dry must be prepared in strict accordance with the instructions on the package. You should not improvise - in order to properly stick meter-long non-woven wallpaper, you need to carefully prepare the materials.

Rolls of wallpaper before gluing are cut into separate sheets. The length of each should be 10-20 centimeters more than the height of the wall. In the presence of large drawing requiring selection, this figure may increase.

Note! If the selection of a pattern is not required, the wallpaper can not be cut into separate pieces, but glued immediately "from the tube".

pasting

After preparatory work you can proceed directly to gluing. For a clearer idea of ​​the gluing technology, we recommend watching the video:

Home distinctive feature non-woven wallpaper is that the glue is applied to the wall or ceiling, and not to the wallpaper itself.

We glue wallpaper on the walls

Wallpaper is glued from the window. In order for the glued sheets to be located strictly vertically, you need to make appropriate marks on the walls. To do this, you need a plumb line, level and a simple pencil. From each corner of the room in two directions, marks are made on the wall a couple of centimeters less than the width of the glued canvas.

So, if wallpaper is used standard width 0.53m, it is advisable to make a mark half a meter from the corner. In the event that you glue wide wallpaper 1.06m, put a mark at a distance of one meter. We apply a level or plumb line to the obtained marks and draw a vertical line. Focusing on the marks, you can start gluing.

Pay attention! When gluing wallpaper on a non-woven base, the adhesive is applied directly to the wall.

Using a roller, glue is applied to the surface of the wall. The width of the applied adhesive should be slightly larger than the width of the piece to be glued. The adhesive composition is applied with a brush in the corners. It is necessary to ensure that there are no gaps on the surface.

A dry cut off wallpaper sheet is applied to the wall treated with glue and aligned along the vertical line drawn earlier. Smooth out the meter from the center to the edges with a wallpaper brush or a plastic roller. Of course, you can use ordinary clean rags for these purposes, but it is very difficult to achieve uniform pressure. The next sheet is glued end-to-end to the previous one. The edges in the corners, near the floor and ceiling are cut with a paint knife, helping wide spatula. You can watch this video in more detail:

Glue from glued wallpaper is gently wiped with a dry, clean rag.

Advice! For pasting walls it is convenient to use wide meter non-woven wallpaper. The gluing process is faster, there are fewer joints between them.

Sticking wallpaper on the ceiling

Before gluing non-woven wallpaper on the ceiling, you must first remove all the fixtures.

Marking is applied to the prepared surface of the ceiling for gluing the first piece. The sheet located on the opposite side of the room from the entrance is glued first, it is there that we outline horizontal line. To do this, it is convenient to use a painting cord on the ceiling, which is pulled along the marks on the ceiling.

Glue is applied with a roller for one strip, smeared with a brush in the corners.

Important! Glue for sticking to the ceiling should not be very liquid. It is allowed to cook it thicker than the instructions require.

One person begins to glue the sheet according to the markup, the second one holds the unused part of the roll so that there is no tension. The wallpaper is smoothed from the center to the corners so that there is no air left between the wallpaper and the ceiling. Then the glued sheet is cut off at the corners.

The glued sheets should dry in vivo, without artificial air heating and without drafts.

Advantages

Non-woven wallpaper or non-woven base has several advantages:

If after a while you are tired of the color of non-woven wallpaper on the walls or ceiling, you can safely repaint them. To do this, use acrylic compounds or waterborne paints.

How to glue non-woven wallpaper on the ceiling is shown in the video: