Make a pear at home: instructions and important nuances. How to make a pear at home: detailed instructions

A quality punching bag is quite an expensive pleasure, and those items that are sold in sporting goods stores at an affordable price are neither durable nor durable. If you know how to make a punching bag with your own hands, then a high-quality projectile for practicing punches will be at your disposal in a few hours.

Materials and tools

To make a boxing bag you will need:

Thick skin. You can use leatherette, tarpaulin, and even just a dense fabric folded in several layers, but all these materials are not so durable and comfortable.
Sand and sawdust.
Kapron thread.
Chain.
Thick needle. Instead, you can use a crochet hook.
Scissors.

Making a punching bag

Cut out a rectangle from thick leather. The height and width of the rectangle depends on what size projectile you want to get. Do not forget to add 3 cm for the seams and accurately calculate the size of the future projectile by multiplying the diameter you need by the number "pi" (3.14). For example, if you need a pear with a diameter of 50 cm and a height of 85 cm, then for its manufacture you will need a rectangle of 160x88 cm. Make the bottom of the bag from the same material by cutting 2 circles. Don't forget to leave seam allowances.

Now you just have to sew the rectangle in height and sew the bottom to it. Sew a zipper into one of the bottoms so that it is more convenient for you to fill up or change the filler if necessary. It is necessary to sew a punching bag with thick nylon threads - it is advisable to make a triple seam. Please note that when using tarpaulin, leatherette or thick fabric, you will need several layers. Each layer must be at least 1 cm smaller than the previous one. The perfect combination is thick leather for the outer layer and tarpaulin for the inner layer. If you want to make the projectile heavier by using stones in stuffing, then sew a separate small bag for them.

Punching bag attachment

To make it convenient to hang your boxing bag, take care of the fasteners. To do this, prepare 3-4 identical segments of the chain and the same number of fastening loops. To make the loops, cut out strips about 30 cm long from your main material (leather or canvas), fold them in half, passing each through the bottom loop of the chain, and sew to the top bottom. Attach the upper loops of the chain to a large carabiner on which your pear will hang.

Projectile stuffing

It is best to stuff a punching bag with crumb rubber. But if you did not manage to get it, then sawdust and sand will do. If you sewed a multi-layered punching bag, then it will be most convenient to fill the inner bag with sand, insert it into the outer leather case, and fill the remaining space with sawdust. If you decide to weight the pear with non-sharp pebbles, then put the bag with them in the inner bag of the pear, and then stuff it with sawdust.

Over time, sand and sawdust will gradually sink to the bottom, so they will have to be topped up. If you are not too lazy to attach a zipper to the pear, then the procedure for restoring the pear will take you only a few minutes.

For every beginner boxer, such a projectile as a punching bag is important. It is needed for practicing strikes, combinations and the like. A punching bag is an imaginary enemy. But, the projectile is needed not only for beginners, but also for those who have been boxing for a long time. In sports stores, a fairly large assortment of pears. But the problem is that the price for them is high, and therefore not everyone can afford to buy this projectile. Then most athletes are wondering how to make a punching bag at home? But in order to start making a boxing bag, we choose for ourselves the materials that you will use in the manufacture.

Pear sizes

Perhaps most people who make a punching bag with their own hands use some kind of bag and stuff it with sawdust or sand, hang it on the nearest branch or horizontal bar, and that's it. But it is important to understand that such a design will last only a couple of workouts. Therefore, if you want to make a boxing bag that will last for a long time, you will have to get serious about choosing a fabric. You should pay attention to the fillers, to the lining of the homemade pear, what kind of fasteners to use when hanging the bag.

Types of fillers

The question of which filler is best suited to a boxing bag is always open. There are quite a few options for stuffing a punching bag. It can be old things, scraps of leather or fabric, sand, sawdust. In general, everything that will keep the shape of the bag. But before you stop your choice on one thing, you need to study the subtleties and nuances of each material.

Skin scraps. Such stuffing is practical in that it keeps the shape of the bag, preventing it from settling, and the skin flaps are extremely durable.
Rubber crumb. This material has been used since boxing became a professional sport. And not in vain. Since this material withstands shock and quickly recovers. Most likely, the skin will deteriorate faster than the "stuffing" of rubber crumb. In addition, professional trainers claim that it is rubber shavings that will help maintain hand health.
Rags. These are scraps of fabric, in terms of their qualities they are not inferior to scraps of leather, but there is one sign in which they still differ. Scraps of fabric need to be better pressed so that they fit as tightly as possible to each other, and such stuffing will be very elastic.
Sawdust. This is the easiest way to fill a homemade bag. But, unfortunately, sawdust quickly settles, a do-it-yourself punching bag becomes soft and loses its shape.
Sand. A boxing shell made of sand will be heavy and hard. The downside is that it quickly breaks down and over time it will fall out of the projectile in the form of dust, no matter how dense the skin is, and at the same time, the dust that will fall will prevent you from focusing on combinations, which means it will reduce the level of training.
Rice and tracing paper can also serve as varieties of filling.
Another version, exactly the alternative that suits real men, is a shell from tires. Of course, this design is durable. You only need three or four tires. Make holes on the sides, and pass a rope or a thick and strong rope through them.

Filler for pear

Only one answer follows from this, that there is no unambiguous version of what exactly will be more practical. But, it is safe to conclude that it is not recommended to use sand, sawdust.

Outer upholstery

The choice of outdoor upholstery is important. Since all the power and weight impact falls on it. It would seem that you can use a dense fabric that can be laid in several layers, but everything is not so simple. There are several variations of upholstery that can be used in the manufacture of pear.

Leather, leather substitute. On a projectile covered with such upholstery, you can train without gloves. Also, it is strong enough and does not let through anything that would not be inside the bag.
Dense fabric, which is folded in several layers. This variety is the most unfortunate, because no matter how many layers there are, the fabric will still let through everything that is inside over time. And under heavy loads, it just breaks.
“It is important that if you work on such a pear, then only with gloves, otherwise you can erase the skin on your hands and knock down the bones”
Tarpaulin. It should be laid in several layers, as it will probably burst, and all the contents will be on the floor. But, it is tough and when working with “bare” hands, you can easily damage the skin.

The most successful combination would be leather and a present. These two fabrics are strong enough, so if you combine them, then the projectile will turn out to be quite strong.

Having studied in detail the information on how to make a homemade bag and what materials are suitable, it is important to read the instructions for assembling a wall-mounted punching bag. This is necessary so that you do not confuse anything and do not make mistakes when assembling a boxing bag with your own hands.

Step-by-step instruction

Working process

After you have chosen all the materials that suit you, you need to get to work. Remember that if you will be working on a projectile with gloves that have little protection, it is worth choosing a soft filler to avoid injury. But, you should understand that you will not get the cylindrical shape that we are so used to seeing in gyms or sports stores, but rather a bag, and the size can be adjusted independently.

Product assembly

Make a pattern, but remember that you need to take your time making a pear. Measure and cut to the length you need. It is advised to use kapron threads. It is advisable to sew something similar to a bag, if you have chosen a fabric, then “Attention, do not forget that it is desirable to fold the fabric in two layers or even more”
For the next step, the "stuffing" should be ready. Pour the filler that you have chosen into the bag, if it is rags, make the layers dense. If it is sand, then in the first days of training, it may settle and you will have to fill it up. Next, fill the projectile, you can proceed to the next step.

In order to secure a do-it-yourself punching bag, you should sew a steel ring into the pear, prepare a chain and fasten it around this circle. Collect the ends of the chain in a pyramid and hang it on the horizontal bar. You can also make a special rack for a punching bag. There are also other ways to attach the bag.

But there are downsides to everything. For example, in order to fill a punching bag with rubber shavings, you have to make an effort, since it is very difficult to find in stores. The seams may not be strong enough, and the pear will probably break. And also homemade fasteners can be unstable and break off at any time.

Do-it-yourself punching bag video

In this video you can see how to properly collect a punching bag.

If you decide that you simply cannot imagine your life without boxing, then of course, you will need a punching bag for training. And by the way, it is not at all necessary to purchase a ready-made projectile in a store, you can make it yourself. If you want to save money and at the same time get the envy of friends, then you can get to work.

What does it take to make a pear?

Before you start the process itself, you should consider what material your pear should be made of and what will be inside it. At first glance, there is nothing difficult in this choice. In fact, almost any fabric can be used as a skin. But not everything is as easy as it might seem at first.

Perhaps the most unfortunate is the method when the pear is made from a high density fabric, which is folded into at least two layers. This cover is not practical. This is due to the fact that every material, even very dense, has pores. It is for this reason that, over time, the material is frayed, and the filler simply begins to crumble. In addition to all of the above, the fabric is still not a very durable material and under high loads it can tear. In this case, the internal filling of the pear will have to be collected from the floor. Separately, it should be said that such a projectile cannot be hit with bare hands. This approach threatens with torn skin on the hands;
You can make a pear out of a tarp. This material is denser. That is why you can not worry that the filler will be outside after a strong blow. It should be noted: if you decide to use a tarp, then despite its strength, use several layers at once. Each previous layer should be one centimeter thicker than the next. This is necessary so that the tarpaulin does not burst and the filler does not spill out. Classes with such a pear should be carried out only with gloves;
A pear made of leatherette or genuine leather. These materials boast of their high density. Therefore, making a pear at home from leather means getting a reliable projectile that can be hit even with bare hands.

Tip: "The best option is a punching bag that combines tarpaulin and genuine leather."

Filler selection

If you have decided to make a pear at home, then you have to think about what its internal space will be filled with. Sawdust is fine if you want a lighter pear, but sand is needed for a heavy and powerful projectile. Here it is worth saying that some use small stones for weighting. Also, the use of ordinary rice as a filler cannot be ruled out. So that your hands are not damaged and always healthy, it is best to fill the pear with crumb rubber.

The process of making pears at home

Take the pieces of leather that fit you and fold them in half. After that, sew them in such a way that in the end the two lines are parallel to each other. Because of what will be the distance between the firmware, the size of the finished product depends. How to make a shape? Actually, it's quite easy. Take the fabric by the corners on one side, fold them and sew. The second bag must be made already 1 cm smaller than the first. It can be made from tarpaulin. If you need the pear to be heavy in the end, sew another small bag, which you will later fill with pebbles. The seams must be triple and embroidered with nylon thread. It will be just fine if you additionally coat them with rubber-based glue.
After all of the above steps, you need to finally decide what your projectile will be filled with. The decision made should be the first step to action. Fill a small bag with pebbles and then insert it into a medium-sized bag. In turn, the latter must be filled with sand and inserted into a leather one. The last bag is filled with sawdust. It is worth saying that after a certain period of time, beating a pear will cause sawdust and sand to settle. They will need to be fed. Everyone decides for himself what exactly the pear will be filled with, and how to make it at home. According to experts, the most suitable filler in this case is rubber crumb;
It remains only to place the projectile. Perhaps you are not looking for easy ways and decide to secure the bag with a ring attached to the carabiners. But there is a simpler, but no less effective way. You need to cut a circle out of plywood, the thickness of which should not be less than 12 mm. In its diameter, the resulting circle should coincide with the base of the pear. Drill a hole in the center and secure the rope in it with a knot. The design that you have turned out needs to be sewn to the projectile.

Unusual way

In order to make a projectile you will need:

Sports bag in the shape of a cylinder;
Scissors;
Garbage bags;
Polyurethane mats;
Sand;
Clothes you've been wanting to throw away for a long time.

The bag should not be too old and made of thin fabric.

Stand the bag upright and line the inside with polyurethane mats. Put a polyurethane circle at the very bottom and make another one of the same, which will later be inserted into the base of the pear. Fill a trash bag with sand and tie it up. How much sand you need to pour is up to you. For maximum strength, place the filled bag in a few more bags and tie them well as well.

The sand bag should be placed on the bottom, and the free space should be filled with shirts, trousers, jackets, etc. When stuffing a pear, you need to try not to leave free space.

After the fabric is tamped, you can cover the stuffing with a pre-prepared circle and close the valve. In this case, the bag must be tightened as much as possible so that it cannot open during the training process.

Is it worth making a projectile at home or is it better to buy a pear in a store?

Now you have a rough idea of how exactly you can make a pear at home. But before embarking on a very difficult process, read this paragraph, which will give you an idea of \u200b\u200bwhether the result of all the efforts spent earlier will be worth it.

After some time, the pear will have to be additionally filled with sawdust and sand. By the way, this procedure is repeated at least 5 times. As for the finished product, which is sold in the store, it is initially ready for use and does not require additions.

Tip: "The best filler for a punching bag is rubber crumb, other materials lose a lot in this matter."

Imagine how much effort you need to spend on firmware alone. After all, you have to sew together several leather fabrics at once. And even these efforts will not be able to make the seams as strong as those of ready-made pears from trusted manufacturers.

You can still look for the advantages and disadvantages of a homemade pear for a long time. Buy a projectile in a store or make it yourself - it's up to you and no one else to decide. If you like to make something and at the same time want to save money, then of course, you need to give preference to making a punching bag at home.

A good punching bag costs a lot, and cheaper options are usually of such quality that they are more likely to bring harm rather than benefit during training.

In order to get a quality punching bag, you can try to make it yourself. For the manufacture of such a sports equipment, a lot of funds or special materials are not required. We can say that a punching bag can be made from improvised materials.

In addition, with the independent manufacture of such sports equipment, you can calculate the required weight and size of the pear, as well as select the appropriate filler.

An important issue in the manufacture of pear is the choice of materials for the cover and filler. It can be a variety of materials, differing not only in operational properties, but also in service life.

For punching bag covers, the following materials are used:

Natural skin. This is the best option because it is durable and at the same time it will not hurt your hands.
Leatherette. Similar in properties to the skin (provided that it is of high quality), but with a strong blow it can burst, so if used, then in several layers.
Tarpaulin. Not the best option, hands are peeled off about it.

As a filler can be used:

Sand
Sawdust
Horsehair
Rubber crumb

Since horse hair is now hard to find, as well as crumb rubber, the most commonly used combination is sand and sawdust. In order to prevent these materials from deteriorating over time, it is better to ignite (sand) and dry thoroughly (sawdust) before backfilling.
You will also need:

Strong thread, for example, nylon
steel wire
Reinforced tape
Bag
Pliers
Scissors
Sewing hook or large needle

How to make a punching bag

At the first stage, a pattern for a punching bag cover is prepared as shown in the figure: h is the height of the punching bag, D is its diameter. The exact dimensions are selected according to individual parameters. A couple of centimeters of seam allowances should be left along the edges of the pattern, and an allowance for a steel wire ring of 5-10 cm should be left on top. Four holes are also made to secure the chain to the steel ring.
The pear is sewn along the side seam, and then the product is turned inside out and the bottom is sewn on. Then the cover is turned back on the face.
The metal chain is cut into four pieces of 20-30 cm each or two pieces of 40-60 cm each. The steel wire is folded into a ring equal in diameter to a pear. Chain segments are strung on this ring and distributed evenly over the four corners.
This ring is inserted together with the chains inside the upper edge of the pear and is wrapped around the edge of the material, and four chains are placed in the pre-cut holes.
The upper edge of the pear cover is stitched so that the steel ring holds tightly. An ordinary bag is inserted inside, which serves as an additional cover for the filler - so that the sand does not spill out during boxing. Provided that the outer bag of the punching bag is sewn from several layers, and its seams are firmly stitched, you can do without an inner bag.
Filler is poured inside the boxing bag (a mixture of sand and sawdust). Their ratio depends on the required weight and stiffness of the pear. It should be borne in mind that the sand is heavier and harder, and over time it will settle in the pear. If you pour only one sand, then over time, the pear will become harder at the bottom, and softer at the top. The best filler would be crumb rubber or plastic balls. If the weight of the filler is insufficient, you can use a weighting agent inside the pear in the form of a metal rod or another narrow bag with heavier filler.
The finished punching bag is hung by chains.

If desired, the punching bag can be wrapped with reinforced tape (it is sold in hardware stores) - this will prevent the knuckles from knocking down.
If the pear is stuffed with sawdust, then they must be carefully examined and all the chips removed, because they can tear the cover and injure the hand.
The weight of the pear is usually made equal to the weight of the opponent, that is, on average, the pear weighs 90 kilograms.
Instead of pear chains, you can use springs from old sofas. Firstly, there will be no clanging from the chains upon impact, and secondly, the sound of the impact will not be transmitted to the neighbors.

To throw out negative energy and get rid of stress, it is enough to beat a punching bag for 15 minutes. Going to the gym is inconvenient, and there is no free time, but the purchase of professional sports equipment will hit your pocket? There is a way out - box at home. Do-it-yourself punching bag is made very easily and quickly.

Do-it-yourself professional boxing equipment

Not only men love to kick the punching bag. Many representatives of the weaker sex are also not averse to hone power moves on such equipment. Self-defense and physical strength are now in vogue. But going to the gym is not always enough time. You can also hang a punching bag at home. And to save money, rather learn how to make a punching bag with your own hands.

You can make such sports equipment from almost any improvised means. First you need to take care of the frame. The easiest way is to make a punching bag with your own hands from a bag. For strength, two or three bags are used, but the outer layer is best made of tarpaulin or thick leather so that your projectile does not crack over time.

Some make a punching bag out of tires. Only in the practice of martial arts is it called makiwara. On such a pear, you can hone side impacts, and you don’t need an opponent for sparring. This role is perfectly played by a rubber projectile.

Particular attention when designing a punching bag should be given to the filler. You can take the material that is convenient for you:

sand;
earth;
dried sawdust;
the cloth;
expanded clay balls.

Depending on the type of filler, the weight of the pear will also change. On average, the weight of such equipment is 80-100 kg. Not every support will withstand such a design, so take care of the reliability of its fastening. Take a strong metal chain and carabiners. In the apartment, the projectile is attached to the ceiling, installing additional fasteners. In your home, you can hone your strikes and improve your martial arts outdoors.

Hanging pear, you can not eat

No, it's not a light bulb, as the children's riddle goes. Today we figure out how to make a boxing bag with your own hands. To create such sports equipment, you need to buy high-quality PVC fabric and strong braid. Choose fasteners depending on where you will mount the structure.

The bag will be 106 cm wide and 120 cm high. The PVC fabric is very strong and reinforced. It is impossible to break it with your hands, and it is difficult to cut it with scissors. Factory sports equipment is often made from such material, so you can be 100% sure of the reliability and durability of your punching bag.

Necessary materials:

PVC fabric;
strong braid;
4 things. carbines;
metal chain;
scheme;
lightning;
filler;
sewing machine;
needle;
threads;
scissors;
ruler;
strong wire;
pencil or marker.

Step by step description of the process:

Here, according to this scheme, we will design a punching bag.

To begin with, we perform all the calculations, and then we purchase the necessary material.
Lay out a PVC fabric or tarpaulin on a horizontal surface.
We transfer the pattern to the fabric in accordance with the desired dimensions.

At the top and bottom we need to make a round base.
To do this, we determine the diameter of our pear and cut out circles of the appropriate size.

To fix the pear in a hanging position, we need a braid.

We have prepared all the details for sewing a punching bag.

We need to cut four pieces of 20 cm from the braid. These will be loops that are sewn in the fold.

For convenience, we sew a 90 cm long zipper on the top of the punching bag.

Such a bag can be unzipped and, if necessary, change the filler.
If you notice, the punching bag is 106 cm wide and the zippers are 90 cm wide.
We need to cut out the missing part from the PVC fabric. It is enough to make a strip 20 cm long.

In the upper part of the punching bag, we sew a braid on which the loops will be attached.

We fold the tape for the loops in half and lay it under the main one.
We place four loops at the same distance around the entire perimeter of the punching bag.
It is best to sew the loops with a machine stitch, first along the perimeter, and then crosswise.

Now we sew our tarpaulin along the edge. We twist it literally by 10-15 mm and process it with a machine line.

We sew a zipper in the upper part of the pear.

The pear was sewn, a couple of strokes left, and you can already work out martial arts.
Around the circumference, we need to insert a strong wire into the loops and fix it with a clamp.

We choose a suitable filler and stuff a punching bag.
Any material must be compacted tightly.
We thread carabiners into the loops.
We attach a strong metal chain to the carabiners.
It remains only to hang our home simulator on a support and you can start exercising.

home > ISO classifier