How to remove duct tape adhesive from clothes. Does the tape leave a sticky residue behind? Choosing the right cleaning method

We are all familiar with such a unique and useful tool as scotch tape. It was invented back in the 19th century, but since then its scope has only expanded. This is not surprising, because there are much more types of adhesive tape: painting, stationery, mounting, double-sided. In addition to the remarkable property of attaching any objects to itself, scotch tape also causes trouble. If the tape peels off, marks remain on the surface that are very difficult to wipe off. Dust settles on them and over time, glue spots become like a little monster from a bad cartoon.

Why stationery, paint and other types of adhesive tape leave traces

Whatever the adhesive tape is made of: paper, fabric or rubber, the composition of the adhesive applied to the tape remains the same. Glue is made on the basis of acrylic or rubber. So, in order to tidy up furniture or other surfaces, it is worth taking care of means that can dissolve these substances.

In addition to such a composition, the ability of the glue to be absorbed into objects also affects the traces. What determines how easy it will be to clean the coating?

From the structure of the surface. The coating consisting of a loose substance is difficult to clean from glue.
From the time of contact. The longer the adhesive stays on the surface, the better glue absorbed.

To make it easier for us to deal with cleaning in the future, let's see what types of adhesive tape exist. And what is the glue feature that distinguishes them.

Stationery - acrylic glue;
Painting (paper or crepe) - rubber;
Mounting (construction), including double-sided - acrylic adhesive;
Double-sided foam-based mounting tape (available different colors) - acrylic or rubber.

Rubber adhesive can be easily removed from surfaces, especially if the tape has been removed recently. It just needs to be removed by hand. Here, perhaps, additional purification is not required. The main qualities of rubber-based glue are elasticity and water resistance. Acrylic adhesive tape marks will take some effort. Since rubber and acrylic are not similar in composition, the methods for cleaning them differ.

Removing adhesive prints from glass

We'll start with solvents. You don't have to go straight to hardware store. Enough to use gasoline. Ordinary household gasoline or the one used to refuel lighters is applied in a small amount to a sponge or cloth. We wipe the adhesive stains properly. Wash off the remaining solvent with soapy water and wipe the glass dry. Instead of gasoline, you can use white spirit or turpentine.

When cleaning glass with solvents, you need to remember that they all have pungent odors. So the room should be well ventilated during cleaning and after it. If it's a cold season outside, you might want to think about other ways.

The following products are also used as a detergent chemical industry like solvent or kerosene. Apply a little to the sponge and remove the glue from the glass surface. These two substances perfectly dissolve rubber chemical compounds.

Solvents containing petroleum elements cannot cope with an acrylic-based adhesive coating.

Alcohol compositions clean the glass surface literally in two counts. You can use medical (ethyl) alcohol, technical (methyl) and alcohol-containing products (vodka, lotion, cologne). Wet a sponge or cloth with plenty of alcohol. Then apply to the traces of glue and press. We fix to withstand the time of 10-15 minutes. Wash with a dry clean cloth.

One more effective method get rid of the glue on the glass it's - melamine sponge. What it is? This is a high-quality and inexpensive analogue of a foam rubber sponge. But the structure contains the so-called melamine foam. It is produced by a special technology of expanding melamine resin. Melamine itself is colorless crystals, slightly soluble in water. Although the sponge belongs to the abrasive products, it can be used when washing glasses, because due to the soft texture it does not scratch the surface and does not leave marks. Wet the melamine sponge, wring it out to a damp state and rub the dirty place properly.

Next on our list are products that contain alkali. These can be gels for cleaning ceramics and sanitary ware, dishwashing detergents with surfactant components. Apply a small amount to the sponge. With effort, we wipe off the glue stains.

Important! When using chemicals with a high alkali content, be sure to protect the skin of your hands with rubber gloves!

Caustic or caustic soda. We will talk about it separately, although they refer it to alkaline cleaners. This is the strongest lye. It has the appearance of scaly white granules. It has no smell, which allows people with allergies to use caustic. It is available in solid and liquid form. But in order not to leave scratches on the glass, we choose the second option. This remedy eats away fat and organic compounds, easily copes with any synthetic materials. When in contact with the surface, caustic soda begins to heat it. To use it for cleaning glass, put on thick rubber gloves. Apply a few drops to the sponge and wipe off the glue for a few seconds. We wash away traces of caustic big amount water.

Important! This substance is dangerous, gloves and goggles must be used when working with it. It must be applied and washed off quickly, as caustic slowly corrodes even enameled coatings. It has strong destructive properties. Can corrode aluminum and zinc. In addition, caustic soda is explosive, it is classified as a combustible material with increased level danger.

Effectively rid a mirror or glass of glue stains acetone. You can use nail polish remover, the main thing is to make sure that there is no inscription on the vial: “Without acetone”. Acetone-free liquid consists of water, butyl acetate and propylene glycol. It will not remove traces of adhesive tape, it will only ruin the manicure. But back to acetone. We impregnate a cotton pad or cotton swab with a solution and carefully wipe the dirt on the glass surface. Beforehand, so that our manicure does not suffer, we put on rubber gloves.

Do not clean glass or mirror with abrasive products. There will be scratches on the surface.
Sunflower oil, despite its popularity, will not rid the window of glue. Under the influence of sunlight, the glue is deeply eaten into the texture. The oil only softens the top layer, does not penetrate the adhesive path, and is not completely able to remove it.
Although laundry soap contains lye, it certainly won't clean off scotch marks. Like oil, it works with upper layers dirt without destroying acrylic and rubber.

We remove traces of adhesive tape from furniture and carpet.

It does not matter how this very trace remained on the material. Maybe moving from one city to another. Or when buying a thing in a store, consultants managed to put a price tag on scotch tape. The main thing is how to return the fabric to a decent look.

In this case, you can not use sunflower oil, gasoline and kerosene. Substances will leave greasy spots. Dealing with them is much more difficult than with traces of adhesive tape.

White spirit or turpentine will become a faithful assistant when cleaning the upholstery. To prevent furniture or carpet from being damaged, dilute solvent water in a ratio of 1:1. We have a gentle solution. With a cloth soaked in this liquid, gently wipe the place of contamination. If the furniture is leather, it is better to use a foam sponge so as not to scratch the surface. After cleaning, we pass over the upholstery with a damp cloth and let it dry.

A stationery eraser is useful when cleaning any furniture. It has no restrictions on materials, temperature conditions. It does not damage tissue. You need to use it the same way as if we were erasing a drawing in a regular notebook. After cleaning the upholstery, we pass the place with a vacuum cleaner to remove small particles of the eraser.

How to get stains out of clothes

Non-shedding natural and fabrics can be cleaned from the adhesive tape with alcohol or acetone. We soak a cotton pad with the solution and wipe the stain. This option cannot be used for printed fabrics, dyed and thin materials.
We soak clothes in soapy water or water with the addition of washing powder. Let stand for 30-60 minutes. Carefully wash the traces of tape by hand.
We set the machine to the mode suitable for the fabric. Add laundry detergent and load laundry. We turn off the spin function, if any, to make sure that there are no traces of glue left on the fabric.
Dissolve soda in hot water. Soak the item for 30-60 minutes. We wash the places of pollution, as it should be rinsed.

Gasoline and kerosene leave persistent greasy stains on fabrics, so they should not be used to remove traces of glue from clothes.

Household appliances shine again

Perhaps this is due to the solutions that catch our eye every day. These are vinegar, glass cleaner, acetone and alcohol. How to use the last two tools, we have already told. The turn has come table vinegar . The solution is probably one of the safe means. But since it's an acid, we still wear rubber gloves. Wet a soft cloth in vinegar and wipe the surface of the refrigerator, microwave or other metal. In addition to the fact that the acid will clean the traces, it will help get rid of the remaining sticky particles. double sided tape. Moreover, vinegar will not leave white streaks on any metal surface.

Oddly enough, window cleaner is useful for cleaning metal objects from traces of adhesive tape. It is more gentle on appliances than vinegar. Apply to a damp soft cloth and wipe thoroughly. Then we pass over the surface with a dry cloth.

Tidying up plastic things

Well, it's just not very difficult. Almost all cleaning products are applicable to plastic objects. Even sunflower oil. We dip the brush (it is better if it is made of pile, not silicone) in oil. And we cover the tracks. Let's stand for half an hour. During this time, the glue changes its properties, softens. And removed with a sponge or cloth. For linoleum, you can use an eraser.

When cleaning plastic, do not use gasoline that can leave light spots. Do not use a caustic and a hair dryer, because if plastic product not of high quality, it may warp.

In addition, hydrogen peroxide helps to remove traces of adhesive tape. Wet the surface thoroughly. We wait a few seconds and quickly scrape off the glue with a plastic scraper (or an old credit card). Remove the remaining peroxide with a damp sponge.

On colored low-quality plastic, white spots may form due to hydrogen peroxide.

Four products for wooden surfaces

Sliding wardrobes from a chipboard, a laminate and a table from natural wood. Oil, eraser, Pinen are applicable to all these materials - unlike White Spirit, it does not have a sharp and bad smell. But in detail we will dwell on a rather non-standard method, it was not without reason that we saved it for dessert. We will use a hair dryer. A hair dryer that every girl has. Of course, the dryer itself is not a cleaner. It only prepares the adhesive for removal by other cleaners. With the help of a hair dryer, the adhesive softens, becomes more viscous. We remind you that you need to use the hot drying mode. Then remove the trace of adhesive tape using one of the above methods.

How to wash off painted walls or wallpaper.

It is best to destroy dirty traces of adhesive on the walls using “dry” methods - using liquids to a minimum. If non-woven wallpaper and water-based paint moisture is not terrible, this cannot be said about paper attributes. We erase the traces with a damp (almost dry) melamine sponge or eraser. Most likely, the glue forms pellets, which can be brushed off with a soft-bristled clothes brush.

If the glue got on the rubber

We use weak alcohol solvents or detergents. Scraping off such marks with a knife or blade is not worth it. Can walk on contaminated surfaces soda solution, but never use a caustic. After all, then there will be no trace of rubber boots.

We have analyzed all the ways in which you can clean the adhesive from adhesive tape with different surfaces. And do not forget about the consequences that threaten the use of certain means. Be careful and attentive, and the choice of method is yours.

We call duct tape duct tape because it is this trademark first appeared on the markets of our country. The creators named it after English word Scotch - Scotch, which in America of the last century was synonymous with stinginess. The nickname came from users of early samples of the tape, who complained that there was too little adhesive on the cellophane strip. Now we are racking our brains on how to wash this glue from adhesive tape, there are so many of it.

In fact, difficulties in removing the remnants of adhesive tape arise only if you do not know some tricks. Despite the variety of types of this tape, glue is used everywhere on acrylic base. It turns out that the choice of means depends on the material on which the contamination was found.

How to clean tape on plastic

In our homes, plastic is used everywhere: frames, household items, furniture, children's toys and many other items. And before cleaning it from stains, you need to evaluate how good this plastic is. High-quality material is able to withstand more aggressive means than cheap products. The contact time is also taken into account, because it is much more difficult to separate the old adhesive tape. Of the simple improvised means may come in handy:

Vegetable oil
white spirit or gasoline
ordinary eraser
Hair dryer

kitchen magic

Oddly enough, removing traces of adhesive tape is easy with any vegetable oil. It mixes with glue, changing its properties. The oil is poured directly onto the contaminated surface or applied to a cloth and applied to the stain for several hours. The mass that has lost its stickiness is erased with a regular napkin, and the surface is washed with soapy water.

Disadvantages. Unfortunately, this method is not applicable if it is not possible to thoroughly wash the object of oil with water.

Three, three, three and it will be ... clean

School eraser works wonders, removing traces of even the most ancient adhesive tape. Dirt is removed, like pencil marks in an album, and all that remains is to brush off the mote with a damp soft cloth. This method is equally suitable for electrical engineering, and for plastic windows, for furniture or for toys.

Heat up until done

Old glue tightly eats into plastic surfaces. That's why it's important to remove masking tape or protective film as fast as possible. It is better to clean pieces of window plastic construction foam than to wait until, under the influence of the sun and time, the glue and the frame of the double-glazed window merge into a single whole. The above applies to other subjects as well.

If this still happened, then you can try using a hair dryer. From heat, the adhesive mass will soften and come into contact with other cleaning products. The help of a hair dryer is indispensable when removing double-sided tape, since in addition to acrylic it contains rubber and various foam materials, dense pieces of which remain on everything to which they have been glued for a long time.

Disadvantages. A hair dryer is not always at hand, and besides, not every plastic will survive the temperature rise without losing its decorative effect.

Tape damaged furniture

During transportation, drawers and doors of cabinets and cabinets are fixed with adhesive tape, and then they cannot decide how to wash the adhesive tape. The tools used here are the same as for plastic, but there are some features of their use.

The invention and appearance on the shelves of scotch stores greatly simplified human life. With this adhesive tape, you can securely fasten almost any hard surfaces. But this household assistant also has a strong negative side, it is extremely difficult to remove traces of glue.

To ensure that the use does not cause difficulties, remove traces of adhesive tape as soon as the tape is removed. Under the influence of heat and sunlight, the glue dries and hardens, and the settling dust makes it dark, creating the effect of a surface that has not been washed for a long time. Fresh glue is removed quite easily, just a sponge and detergent.

With ordinary tape, you can fasten most hard materials. Plastic, wood, glass, metal - its possibilities are almost limitless. Such a fastener provides reliable fixation for a long time.

Problems arise after the need for this method of fastening disappears. It is important to know how to remove tape marks in order to dark spots glue did not disturb the harmony of the house.

Scotch tape will help you quickly and effectively remove the glue. With the sticky side of the tape, it is necessary to consistently collect dirt, and then simply wipe the surface with a damp cloth.

If this method did not bring the desired results, the “heavy artillery” will have to be used:

Vegetable oil. Fatty substance, falling on the glue, partially destroys it and causes it to swell. A paper towel will help remove the sticky layer.
Solvent. White spirit and acetone are suitable for the role of an effective adhesive fighter. Even ordinary nail polish remover will be useful. But care should be taken, a caustic composition can disrupt the coating of furniture or a valuable item.
Medical alcohol. The product dissolves the glue well, but acts too aggressively on the surface.
Office eraser. It will help to mechanically remove adhesive residue.
Household cleaners. Some of them help to effectively cope even with old glue stains.

Before using any tool, you should test its effect on an inconspicuous area. Otherwise, you will have to figure out not only how to remove traces of adhesive tape, but also how to restore the coating.

Glass and ceramic tile cleaning

Often, with the help of adhesive tape, they are attached to the windows various decor. But the holidays pass, and an unpleasant problem efficient removal glue remains. Glass is much easier to clean than plastic or metal. It is recommended to combine this process with the planned one.

You can use:

Any solvent. Acetone, white spirit and alcohol will not harm the glass. The product must be applied to a cotton pad, it is easy to wipe the dirt and clean the glass with a wet cloth.
mechanical impact. Tape marks on glass can be easily removed by scraping with a not too sharp knife. Remove residues with a solvent.

It will take a lot of effort to remove the adhesive layer of double-sided tape. It must be soaked by applying cotton wool soaked in a solvent. And only after that scrape and clean the surface of the window or tile completely.

Cleaning of furniture and appliances

Removing traces of glue from surfaces sensitive to solvents is quite difficult. Acetone, white spirit and alcohol should be used when all other methods have been tried.

The safest, but time-consuming and time-consuming way is to remove using vegetable oil. It must be applied to the adhesive, wait 5-7 minutes and use a paper towel to remove the partially dissolved sticky substance. Repeat the manipulations until the furniture is clean. Oil cannot be used on untreated wood.

You can gradually remove the glue layer by layer with a stationery eraser.

If the “soft” methods have not borne fruit, you can pick up a cotton pad moistened with a solvent. But be sure to test its effect on an inconspicuous area.

Solvents may leave whitish or cloudy marks on glossy facades. Intense rubbing with a soft dry cloth will help to remove them. It is important to work quickly so that any solvents do not have time to damage the polish or other finish.

Cleaning plastic

When there is a need to protect plastic windows from damage, many prefer cardboard, fixed with adhesive tape. Problems usually arise immediately after an attempt to remove the design is necessary and, of course, traces of it.

The task is complicated by the fact that the plastic cannot be exposed to a solvent for a long time. So, in the presence of fresh or old traces of adhesive tape, how to wash it without damaging the window? You can use one of the following ways:

The heating. Under the influence of high temperature, the glue will soften and it can be removed with an eraser. You can warm household hair dryer for drying hair. But it is better to first check the reaction of the material to heating in an inconspicuous place.
Vegetable oil. By successively applying the greasy substance, allowing it to soak in, and wiping with dry paper, even a significant layer of adhesive can be removed. The main thing is patience. Put away greasy stains dishwashing detergent will help.
Solvent. You need to work with acetone quickly, after checking the reaction of the coating in advance. Moisten a cotton pad, quickly wipe the adhesive area and remove the dissolved layer with a damp cloth. Repeat until all traces of tape are removed.

The same methods can be used to clean refrigerator fronts, gas stove and any other household appliances. The main thing is not to forget to arrange an “endurance test”.

The most difficult thing in removing traces of adhesive tape is to choose the appropriate method of exposure. A little thought and experimentation, and the glue residue will no longer disturb the ideal surface of furniture, appliances and plastic windows.

Scotch today is used by almost everyone. But when you try to remove the tape, traces inevitably remain that spoil appearance furniture or other items.

Almost everyone uses adhesive tape today, but when you try to remove the tape, traces inevitably remain

You can get rid of the problem if you know the most effective methods remove traces of adhesive tape from different surfaces.

Ways to remove traces of adhesive tape

Methods for removing marks depend on the surface material

The intensity of traces depends on two factors. The first is the structure of the surface on which the tape was located. The looser it is, the more difficult it is to remove the tape. Adhesion strength is also affected by the time during which the adhesive material was attached. The longer this gap is, the more the composition is absorbed. Consider practical advice how to eliminate traces of adhesive tape on different surfaces.

How to remove from plastic

Gasoline, oil and eraser are the best helpers

You can get rid of sticky residues on a plastic surface with refined gasoline, white spirit, vegetable oil or an eraser. You will also need a cotton swab or rag.

First, consider the method of removing traces with gasoline or white spirit. Your actions should look like this:

You should first check the reaction of the solvent on the work surface. Apply composition to small plot, wait 5 minutes. If there are no changes, you can get to work.
Soak a swab in the solvent, then work on the stain. Proceed until the traces are completely removed.
Finally, wipe the area with a dry cloth.

Vegetable oil is used in the same way. Only here it is not necessary to conduct testing - this substance is not capable of harming plastic. After removing the stains, greasy traces will remain on the surface. Soap solution will help to remove them. Soak a rag in it and wipe problem areas.

In the fight against the remnants of adhesive tape, an eraser is also useful, which you just need to rub on the surface. This method is more laborious and lengthy. However, it allows you to do without chemical compositions which can damage the plastic.

Removing from furniture

Use oil for gentle removal

It is difficult to come up with a replacement for adhesive tape during a move and in homes where small children live. With its help, drawer flaps and cabinet doors are fixed during transportation, and various pictures are also glued to furniture. Remove traces will help vegetable and essential oils. Their variety doesn't matter. Suitable sunflower, corn, linseed or olive oil. Just dampen a sponge or rag and work on the areas you need. Finally, clean the marks with a brush or eraser.

You can also choose any essential oils. But they contain active chemical elements. Therefore, it is recommended to wear protective gloves before cleaning the surface. Test on an inconspicuous spot first.

Important! Particularly vulnerable to chemical elements is furniture with a polished finish, and sets of expensive woods.

What do you need to wipe off the glass

Alcohol solutions - the best remedies for glass

To remove sticky marks from glass will help:

window cleaner;
alcohol;
acetone or nail polish remover.

The solvent is applied to a cotton pad, after which the surface is wiped. Do the work with gloves - this will help preserve the manicure, as well as protect your hands from the aggressive effects of the compounds. Alcohol renders Negative influence on the skin, which becomes dry after contact with it.

There is another method for removing sticky residue. It involves the use of a blade that needs to be scraped across a glass surface. But this method is not suitable for everyone. The sound that is produced in this case cannot be called pleasant. In addition, there may be scratches on the glass. This method should be used in the absence of solvents.

How to easily remove a sticky layer from clothes

Adhesive tape can be removed from the fabric by washing or using gasoline.

You need to start cleaning clothes as early as possible so that the glue does not have the opportunity to soak into the fabric and harden. There are two ways to fix the situation:

The first method involves the following steps. Soak a cotton swab in acetone or alcohol and rub the stained area. It should be remembered that only fabrics without patterns that do not shed can be cleaned with solvents.
If the clothes do not meet these characteristics, a solution of washing powder will help. Soak the fabric in it for 30-60 minutes, then rinse. If the powder is not available, replace it with soap or soda.

Important! When working with fabric, kerosene and gasoline should not be used, as they leave greasy stains that are very difficult to get rid of.

What can wash marks on linoleum

This material is now widely used for floor coverings. Despite its advantages, linoleum instantly absorbs any liquids and compositions that have a soft consistency. And when it hits the adhesive tape, characteristic traces remain. Essential or vegetable oil will help to cope with the situation. Wet the sponge and remove sticky spots. Do not try to wash off the remnants of tape with water. This will not give the desired result, and the surface of the linoleum may be damaged.

How to gently flush from a car

Oil and gasoline formulations will quickly remove traces

Solvents should not be used to remove sticky marks from the surface of the car, as they will damage the paintwork. Here you will need more gentle means:

composition for washing dishes;
kerosene;
petrol;
vegetable oil.

You also need to prepare a napkin or sponge. Each of these tools has its own specific uses. If you use gasoline and the outside temperature drops below zero, be sure to warm up the interior of the car before working. Kerosene not only removes adhesive residue, but also gives the surface a glossy sheen. This tool is best used on the street, outside the garage.

Important! Kerosene has the property of exuding toxic fumes, so working with it on fresh air will prevent Negative consequences for health.

Apply the product of your choice to a rag and treat the sticky areas of the car. After using vegetable oil, wash the surface with soapy water. This will erase and remove streaks and greasy stains.

Erase from skin

When working with adhesive tape, traces of it can remain on the hands. Here are some ways to get rid of them:

wipe the skin with a cotton pad soaked in vinegar, which has the ability to dissolve glue. But after this procedure, a not very pleasant smell of acid will remain on the hands. Soap will help neutralize it;
clean your hands with a 95% solution of medical alcohol, which is sold in any pharmacy. If necessary, it can be replaced with a strong tincture;
hydrogen peroxide is equally effective.

How to remove double sided tape

Double-sided tape is more difficult to remove, but possible

The peculiarity of this adhesive tape is that both of its surfaces are covered with a sticky composition. It has high fixing properties. In that Double-sided tape ahead of conventional adhesive tape. But removing traces of it will be more difficult.

If you're having this problem, try the following methods:

Wipe the area to be cleaned with a melamine sponge. The material from which it is made resembles an eraser. Thanks to this, the sponge successfully copes with various contaminants. The sponge must be wetted with water before use. It will become like foam and acquire the same abrasive properties that it has. sandpaper. But the sponge will remain smooth and soft, which will avoid damaging the surface.
Moisten a cloth with white spirit and rub the area to be cleaned. You can use gasoline, kerosene, alcohol and vinegar. But use these products only if you are sure that the surface will not be damaged.
You can also remove the remnants of the adhesive layer by means of high temperature. Take a hair dryer and direct a hot stream of air to the problem area. The adhesive will soften and become suitable for mechanical removal. To do this, use a stationery eraser.

Removing the remnants of adhesive tape is quite easy. This can be done with the help of improvised means that can be found in every home. But in the process of work, it is necessary to take into account the characteristics of the material from which the surface to be cleaned is made, and its reaction to the composition used.

There are situations in life when you have to resort to various methods to clean any surface. Very often, traces of adhesive tape appear on furniture, windows and doors. This happens when you need to attach something to a surface. And when the need is gone, you peel off the adhesive tape, but the glue remains. This is unpleasant not only because the surface becomes sticky, but also because dust and other rubbish stick to it, dirt accumulates. In this article, you will find the answer to the question of how to wipe tape from plastic and several ways to solve this problem.

Remove stains with duct tape

The most common way to remove glue stains from tape is with the tape itself. The principle of kicking out works here. "However, this method does not always work one hundred percent, if, for example, the traces are already old.

If you use this tool, nothing bad will happen to the plastic surface. To remove tape stains on plastic, take any and cut off a small piece. Then, with sharp movements, stick it to the stain and tear it off. You need to do everything quickly so that the tape only has time to grab the glue from the surface, but not stick by itself.

Usually, this method works well with recent pollution. But if the glue cannot be removed, then take more serious measures.

Sunflower oil

How to remove adhesive tape from plastic? The solution to the problem can usually be sunflower oil. You can also use any other vegetable oil you have at home (olive, linseed, grape) or even essential oils. But still it is more economical to use sunflower for this purpose, since it is the cheapest.

To understand how to wipe marks from adhesive tape from plastic, you need to try several methods and choose the right one. So, pour some oil on a foam sponge or cloth. Put it on the stain and leave it for a while. 15-20 minutes will be enough.

The oil works in the following way. Under its influence, the glue is impregnated and increases in volume, therefore, moves away from the surface.

After the specified time, simply wipe with another cloth or paper napkin remnants of dirt. The oil can be easily washed off with ordinary laundry soap.

Now you know how to wipe the glue from the adhesive tape from the plastic using vegetable oil. It will help solve the problem on surfaces other than wood.

Wipe off glue with alcohol

Alcohol is universal and effective remedy. It will not only not harm the plastic surface, but also completely clean it of contaminants.

If you are wondering how you can wipe the adhesive tape from the plastic, look in the first aid kit. In any house there is a medical, ammonia or tincture of alcohol. You can also use vodka.

Alcohol will help not only remove the adhesive from the surface, but also bleach the plastic if it has turned yellow. Take a cotton pad and soak it in alcohol. Apply a stain remover.

Most often, this method is used to clean plastic windows, and not only for frames, but also for glass. Even special means for glasses are made on an alcohol basis.

Remember, never apply alcohol to a painted surface. The product may dissolve the paint.

stationery eraser

Many may not believe it, but the solution to the question of how to wipe the adhesive tape from plastic can be an ordinary stationery eraser or, as it is called in another way, an eraser. It cleans wooden or plastic surfaces easily and simply.

There are no tricks to use here. You just need to take an eraser and rub the glue stain until it disappears. Double-sided erasers or pen erasers work even better as they have a hard structure.

When the contamination is removed, a rubber mark may be left. There is no need to be afraid that a new spot has appeared in place of the old one. It can be easily removed with a damp cloth, preferably made from natural fabrics that absorb moisture well.

Soap

Soap, especially laundry soap, is a folk cleaning agent that has been used since ancient times to clean various contaminants. Surprisingly, soap can even remove traces of adhesive tape.

Dilute a little soap in water so that a solution of sufficient concentration is obtained. Now soak a piece of cloth or sponge in the product and rub the dirt left by the tape. If a plastic thing small sizes and it can be immersed in water, it will be more convenient to leave it for a while in a soapy solution. So the stain will go away by itself, and you just have to wipe the surface.

Cleaning agent

Among other things, dry detergent powder will help in solving the problem of how to wipe the adhesive tape from the plastic. If there is none in the house, try using soda, it also acts like a scrub.

Of course, if this cleaner is used incorrectly, it can damage the surface, leaving scratches. But there will be no harm if you proceed as follows:

Dampen the sponge and sprinkle the powder on it.
Press onto the stain and leave for a while to soak the dirt and become more pliable.
Gently wipe off the adhesive. You can not rub the stain with force - this is what injures the plastic and any other surface.
When finished, wipe with a clean, damp cloth to remove any remaining cleaning powder.

hair dryer

How to get rid of plastic? Probably not many people know that it can be removed with a hair dryer.

So, clean up according to the following steps:

Plug in the hair dryer. The main thing is that it reaches the place of contamination.
If your hair dryer has several modes, then you need to set it to high power. An average is enough if you are afraid of overheating the device.
Now turn on the hair dryer and point it at the double sided tape. You need to hold as much as possible, at least three minutes. Especially warm up the edges of the tape - in these places the adhesive tape sticks most strongly.
Turn off the hair dryer, pry off the corner of the tape with a flat plate or fingernail. The adhesive tape should immediately come off about half. You can gently tear it off, or warm it up again so that it moves away by itself.

As a plate, the non-sharp side of a small knife or a children's spatula for plasticine is suitable.

Vinegar soap solution

If you are still thinking about plastic, then improvised tools that are usually found in every home can help you. It's vinegar, soap and water.

Prepare a solution. This will require 270 g of water and 60 g of vinegar. This amount is equivalent to two cups and a quarter of a cup, respectively. Add some liquid soap to the solution.

Using a sponge or cloth soaked in the solution, remove the tape by rubbing the dirt in a circle. Be careful not to rub too long or increase the percentage of vinegar as there is a risk that the surface will fade.

However, you have nothing to fear if the plastic (or any other) surface has White color. From the vinegar-soap solution, it will only look cleaner. By the way, vinegar is widely used in glass cleaning - it not only removes dirt, but also makes the surface shine.

Melamine sponge

There is another tool in the fight against double-sided adhesive tape - this is sometimes called a magic eraser in another way.

All you have to do is soak the melamine sponge in water. Then, simply rub off the remaining adhesive tape or glue residue. The Magic Eraser does a great job of doing this, and you won't have to struggle with getting dirty for long.

This tool is considered a mild abrasive. It must not be used on glass and surfaces that have been polished. However, you can safely clean walls and doors with a melamine sponge. Keep in mind that the magic eraser may slightly discolor the item that needs to be cleaned.

Many are wondering where you can buy this tool, because, perhaps, for some it is new. In fact, a sponge can be bought at regular store household goods or a large household goods supermarket in the cleaning products department.

Thus, do not panic if a trace of adhesive tape or double-sided tape is found on the plastic surface. Use the recommendations of this article, and such pollution will no longer be a problem for you.

home > Abrasives