Building facade design. Facade design of country houses

__________________________________________________________________________________________________

________________________________________________________________________________________________

The facade of the house can be considered its original architectural attire. It's like outer shell, forming the impression of general appearance buildings, as well as about its owners. There is no doubt that the chosen exterior finish The style of the building reflects the owner's preferred colors and other taste preferences.

It should be taken into account the fact that experienced builders do not recommend the use of such plaster for buildings located near motorways. The fact is that vibration transmitted to the walls from passing vehicles can cause formation in the material.

Acrylic plaster. This material is characterized by excellent moisture resistance and plasticity.

But technical features fabrication of the material can cause the appearance of an impermeable film on the surface finished by it, which is an obvious obstacle to the evaporation of moisture and the breathing of the material. It should be noted that if we are talking about, for the insulation of which polystyrene was used, or houses located along the highway, then for them this quality becomes more of a virtue.

Silicate plaster. This material has a lot of advantages. It has high plasticity, good air permeability, its antistatic properties prevent the accumulation of dust particles. If we take into account the period of use of the material, then among other types of plaster it can be called the most expensive, moreover, both in terms of the cost of the material itself and in the installation work with it.

Silicone plaster. This type of exterior finish combines all best qualities previous ones. This plaster has become a hit among other varieties this material. Noteworthy is the fact that successful combination the excellent qualities of the material are accompanied by a very affordable price.

Facade of the house: siding

This material for exterior decoration has several varieties:

• wooden siding;
• metal.

Wooden siding has been used for facade decoration for quite some time. long time, and managed to prove itself with better side. Its vinyl counterpart did not reach such popularity because it could not assure homeowners of its safety. It is believed that, in fact, there is no reason for this. What are the obvious advantages of the material?

• facade creates as if protective screen, fully ventilated, helping to remove excess moisture, and not interfering with the natural breathing of the walls of the building;
• The vinyl coating is an insurmountable obstacle to the effects of harmful ultraviolet radiation, it is perfectly cleaned, and is able to maintain its original appearance for a long time;
• The chemical composition of the material allows it not to be involved in the combustion process, but if a fire occurs, the release harmful substances into the atmosphere, outside the building, in no way worsen the composition of the indoor air.

wooden siding

The durability of individual types of wood is not too high. However, the material made from impregnated wood acquires not only increased wear resistance, but also a special resistance to adverse conditions.

Finishing the facade of the house with tiles

In design, this method of finishing looks quite simple, but it is rather complicated in technical performance, and very expensive. All rules for proper installation must be strictly observed.

• It must be remembered that masonry walls tend to shrink;
• Availability of many types tile material involves the use of glue for each specific grade, suitable in each specific case;
• On the market are various varieties tiles, the surface of which imitates all kinds of materials. It can be a chopped stone, a noble tree, a simple one. If preference is given to one of the types of this material, then it does not interfere with taking care of the grout composition suitable for the color scheme. Its use will provide the most spectacular and elegant look;
• The pleasant possibility of combining different textures is not excluded, but when choosing materials suitable for this, their size should be taken into account. To give the building a certain solidity and monumentality, larger parts and elements can be used to finish the basement. The walls are trimmed with more accurate, miniature details.

Brick: facade decoration

Material such as brick, from time immemorial has been feature quality factor. When a special one appeared, a certain respectability was added to it. Usually, cladding with this material is carried out even at the level of the construction of load-bearing walls.

Therefore, it can be considered that appearance buildings are thought out in advance by the master. But there are other cases as well. Let's say the building has already been built, but something didn't work out, and it doesn't look very attractive. The situation can be corrected by the use of bricks. In what cases is it appropriate?

House facade design: styles

Thinking about what it will be appearance your home is a creative process.

However, it should be treated responsibly and seriously, balancing desires with opportunities, trying to find a middle ground.

All stylistic decisions can be divided into several types:

• Hi-tech and modern;
• Country style;
• Classic;
• Styles developed on the basis of Canadian and British motives;
• Chalet.

Industrialism and minimalism. Urban houses with such features are characterized by a clear desire for industrialization. At the peak of popularity among homeowners and designers are now minimalist styles, clearly gravitating towards the high-tech direction. The main concept of buildings decorated in this style is simplicity of design, conciseness and clarity of all forms.

High-tech is more characterized by versatility and convenience. For decoration external walls buildings are made of plastic, glass and metal. The unpretentiousness and rigor of the facade design style is emphasized by the ascetic colors- black and white predominate, and the color of steel.

Country varieties. This is a real trend of styles, consisting of many different trends with their characteristic characteristic features. This type includes French Provence, Russian village, alpine chalet, cowboy wild west. We can say that country is a multinational style that combines the customs of a particular country.

For its implementation, natural natural materials such as wood and stone. The stone can also be taken artificial, because thanks to modern technologies it is almost indistinguishable from the real thing. This style is especially suitable country houses located near lakes, mountains or forests.

Classic. This style is constantly in high demand. What are its main features? Houses decorated in the style of the classics have quite proportional and clear forms.

All parts and elements of the front facade are distinguished by symmetrical geometry. Door and window openings are made in a traditional rectangular shape.

Arches are allowed. Among other types and types of design, the classic style stands out for its simplicity and artlessness, unpretentiousness and sophistication. And although the desire for minimalism is quite clearly emphasized in this style, elements such as elegant columns, massive railings, and other decorative details will not be superfluous.

Facade design project

First stage project development involves the beginning of sketch development. If you have the necessary skills, you can do it yourself, otherwise it is better to turn to the services of specialists.

The future owner of the house expresses to him his wishes, preferences, requirements for the future building. Then proceed to the design of the facade itself.

If the building has already been built, you will need to make all the necessary measurements. With the help of special computer programs you can visualize the proposed style directions in order to decide on the choice of a specifically suitable one. Based on the selected materials, their future consumption is calculated, an estimate is prepared. This requires special professional skills, so it is not recommended to do it yourself.

Next stage- Start decorating. Here it is quite possible to rely on own forces and do it yourself. During work, remember that general design the house should be in harmony with the decoration of its small parts. All parts and elements of the structure must correspond to each other, and are made in a single stylistic solution.

The final part of the work on drawing up the design will be the design event. In the process of their implementation, you can translate into reality all your wishes in terms of finishing the facade of the house. It should be noted that such a design project can be developed not only for a newly built house, but also for an old dwelling. The main difference in the case of remodeling an old house is the need to dismantle or remake the previous facade. This, of course, will complicate the whole process to some extent, but will in no way affect the final result.

LLC "ECOsystems" is engaged in the design of facades of office buildings and cottages. Experts perform as standard solutions, and original projects according to the wishes of the clients.

Modern construction market makes serious demands on the quality of work for companies involved in the design of facades of office buildings. Competently drawn up design and estimate documentation helps to choose facing materials and architectural solutions that will make the facade of the house reliable, durable and attractive.

For these purposes, ECOsystems specialists use Hi-tech designing facades of office buildings, involved in the calculations innovative materials with high heat and sound insulation. Qualified designers guarantee a thorough study of the project, competent compilation budget and working documentation, strict observance of contractual obligations.

Development of design projects from 20 thousand rubles.

Carrying out strength calculations from 20 thousand rubles.

Prices for geodetic survey of facades

Work examples

Stages of designing the facades of turnkey office buildings

This service includes the following types of work:

1. Preliminary assessment of the technical condition of walls and load-bearing structures of office buildings. Specialists check strength characteristics walls of the house, the reliability of the foundation and the level of the basement, columns, window and door slopes etc. Often on this stage pre-determine the material of the facade cladding.
2. Choice design decoration. When designing the facades of office buildings is carried out along the walls of an already built object, the style of cladding is selected for the appropriate exterior.
3. Drawing up a sketch. Drawing of all decorative and architectural elements of the structure.
4. architectural solution. Detailed visualization of the facade of office buildings takes into account all the features of the object in technical and aesthetic terms.
5. Development of the technical part of the project and preparation of specifications for parts and products. Prepared as-built documentation for builders: drawings, plans, technological maps etc.
6. Drawing up a budget. Having received a complete picture of the design and appearance of the future facade, specialists perform the final calculation of the cost of materials and construction work.

The result of the turnkey design of the facades of office buildings is full set executive and budget documentation for the production of construction and repair activities.

The cost of designing the facades of office buildings

Tariffs for design development services are formed taking into account the following factors:

• complexity design houses (architectural style, technical condition load-bearing elements, etc.);
• total area of ​​walls for cladding;
• the urgency of the work;
• composition of project documentation.

You can learn more about the cost of developing a turnkey project at ECOsystems LLC from managers.

Submit your application

Living in major cities, among the faceless buildings. Differing from each other mainly in color and height. You start thinking about own house. About how it will look, how it will be arranged. Introducing it to himself, each person "draws" a portrait of his future home. Because every host country house wants the facade of his house to be unique. Stand out from the gray mass.

The facade, like a good suit, embodies the taste and status of the owner, his worldview. So that the cladding of the facade brings the long-awaited joy of seeing the new appearance of the house, and does not end with disappointment from a result that is different from the expected one. Before facing the facade, I develop a design project for the facade. This avoids surprises during cladding, as well as unnecessary spending on the purchase of materials. So where to start? Discuss the style and materials of the façade with the architect. Determine the type of facade to be installed - ventilated or "wet". Upon completion of these works, finished design project. Visually presenting the view of the future facade, you can proceed to its cladding.

How to start a facade design project?

It is difficult to develop a facade design for a private house, for this you need to have knowledge both in the field of design and in the field of architecture and construction. Many houses and cottages similar to each other are proof of this.

In order for the facade of the house to be harmonious and fit into environment and at the same time retained its individuality, it is necessary to entrust its development to specialists. Most correct solution seek help from specialists before starting construction and facade cladding. In special cases, during construction.

Stages of development of the facade design project:

1. Inspection of the location of the object - definition of the environment in which it is necessary to "fit" the house or cottage.
2. Inspection of the existing facade definition and evaluation of the scope of work. Estimate the time to complete them.
3. Personal meeting with the customer discussion and definition of style preferences and facing material facade of the house.
4. Development of a design project - several three-dimensional models of the future facade are being developed. A preliminary estimate of the cost of work is carried out.
5. Approval of the design project - design project approval . Refinement by the architect of the selected façade cladding option
6. Preparation of sketch drawings- preparation of sketch drawings, taking into account the characteristics of the building. Calculation of the facade structure and development of a working architectural project.
7. Cost calculation: final calculation of the cost of materials and work, for approval with the customer.

3D project of facade cladding with natural stone

How to estimate the cost of a project?

Each project is evaluated individually, taking into account the specific facade project, since the following factors influence the cost:

• Area of ​​all walls
• The complexity of the work performed
• Compiling a documentation package

The specialists of our company successfully perform tasks of any complexity, maintaining a balance of reliability and beauty. We fulfill installation work with a guarantee of quality and observance of the planned terms of performance of works.

In our projects, we focus on finishing houses and. Facades made of these materials look very expensive and impressive. And keep their looks long years. After all, their strength has been proven by time.

To understand the task and accurately determine the cost design work to create a facade design, you need to send photos of the house by e-mail (preferably from all angles), indicate the overall dimensions of the house, if you have a BTI registration certificate, it is enough to send copies of floor plans, you can also attach your favorite examples of houses to the letter in order for us to understand your style preferences. After that, we will be able to say the exact cost of creating a design project for the facades of your country house!