Types and scope of use of decorative corners on the corners of the walls. Plastic corner - selection and installation of material for external walls and slopes Decorative finishing of internal corners

What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.

Decorative wall corners

One of the most problematic areas in interior decoration are the outer corners.

It is quite difficult to paste over them with high quality, often the wallpaper rises at the corners, the corner is easily damaged by hitting a solid large object when moving furniture or carrying it.

Decorative corners help to solve these problems.

The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.

Where applicable

There are many options for using corners in the interior. They can be used to decorate both external and internal wall corners. Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners. To finish the curved surface of the corner, flexible, “arched”, corner profiles are used.

The most common ways to use decorative corners:

• Adjacency of a window slope to a wall. It is extremely rare to see a slope, the near edge of which is not closed by a corner. Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often occurs at external corners. In addition to the technical, the angular profile also carries an aesthetic load. The use of a white corner completes the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
• Decoration of the doorway. Corners can also be used in the design of the doorway, when the thickness of the wall is greater than the width of the door frame. In that case, additional strips are installed to the door, the adjoining of the end of which to the wall is closed with a corner element matched to the color of the door.
• Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall finish from mechanical damage, such as accidental impact with a heavy oversized object. It helps to preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies the cleaning of the room. Often, handprints remain on the outer corners, which are easier to remove from plastic than from wallpaper. Properly selected contrasting corners allow you to avoid dullness and monotony of the interior.
• Formation of openings. In interior design, instead of doors, they often leave just an opening, for example, between the kitchen and the living room. The corners serve to decorate and protect the corners.
• External corners of walls tiled with tiles or wall panels. The ends of the tiles are closed with an angular profile, because. they differ in color from the front surface of the tile. If the tile is cut to size, and the cut edge is not sanded, it is easy to cut yourself on such an angle. When mounting the corner on the panel, they close the corner joint. The use of a special corner profile for these purposes is not always convenient, then decorative corners are used.
• Decorating and protecting the corners of gypsum board structures, such as racks or shelves.
• Decorating furniture, framing mirrors. In addition to decorative functions, it protects the edges from chipping.

Varieties according to the materials of manufacture

Corner profiles are made of various synthetic materials, MDF, wood, metal. Its appearance, technical characteristics and scope depend on the material of the corner.

metal

Made from aluminium, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are divided into polished, anodized and with a decorative coating, usually wood-like, but can also be painted in various colors. They are mainly used in the manufacture of furniture, less often in interior decoration. To protect the ends of the furniture boards, they are covered with a corner with different shelves, one of the shelves of which completely covers the end, the second goes slightly onto the plane. Unpainted profiles are suitable for framing mirrors and glass-covered pictures or posters.

Metal corners can be mounted on walls as a basis for a light false ceiling of the Armstrong type or PVC panels. Aluminum products are attached to the steps as anti-slip pads and edge protection from chips.

Wooden finishing

They are made from various types of wood, including valuable ones. Wooden corners are used to complete the decoration in rooms made of wood, for example, wall cladding with a block house or clapboard.

With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or wallpapered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because. they are fragile and with the slightest effort to bend or unbend them can crack.

Transparent silicone corners for wallpaper

If you need to protect the corner and keep the pattern of the wallpaper, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.

Polyurethane

They are smooth, with a relief ornament and profiled. Smooth ones are similar to ordinary PVC corner profiles, differing from them in a larger shelf thickness. On the shelves often reproduce a three-dimensional ornament.

For use in classic interiors, polyurethane profiles of a complex section are produced that imitate gypsum stucco molding. On sale are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, a smooth part under a tree, and an ornament under gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.

Plastic colored

Made from PVC. Visually imitate wood, metal surface or simply painted in one shade. The palette of monochrome corners contains approximately 30 shades. If necessary, in the desired shade, you can use special paints white profile. It is used everywhere in decoration, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.

MDF corners

They are 2 strips of MDF glued together with a film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are movably fixed relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, right and obtuse angles. Usually used when lining walls with MDF panels, but can also be used instead of any other type of corners.

MDF corners are undesirable to operate in rooms with high humidity.

Corner decor in an apartment: how to decorate a room with corners

The options for using decorative corners in the interior design of a room depend on many factors:

• surface material. A white plastic corner glued to the corner of walls lined with clapboard will look ridiculous.
• Finish colors. In no case should a red element be placed in a room designed in pastel colors.
• General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior, a polyurethane, “stuccoed” profile, not suitable for high-tech style.
• Purpose of the premises. In the nursery, silicone corners are perfect. They will keep the corners intact and help protect the child from injury.

Design options for wallpaper

To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of approximately the same shade, you can match the product to the color of the walls, if different - to the color of the wall that is more often looked at. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room.

As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor with the help of an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When decorating a strict laconic interior, metal corners will look good.

The solution for the corners on the slopes: the better to close the corners in the apartment

To complete the finishing of the slopes, corners are used in the color of the slope, almost always white. Often, a sandwich panel serves as a material for slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or plasterboard. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen so wide that these errors are closed.

The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly “unbent” - put on a flat surface or a pipe of large diameter and lightly press with your hands, moving along the corner.

In the cold season, the profile must warm up to room temperature before work.

Option for decor under the wallpaper

For walls pasted over with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, profiles made of PVC, MDF, wood or smooth polyurethane are suitable. The profile should be of a light shade, because dark can come out from under the wallpaper. Wallpaper is glued on it, the glue is allowed to dry, then, not earlier than the next day, it is mounted on the wall. Wallpaper on the corner should be glued in one piece, of such a size that the wallpaper goes to the inside of the shelves.

How decorative corners are attached

For the installation of an angular profile, various adhesives are usually used; much less often, metal and wooden parts are mechanically fixed using self-tapping screws or nails.

What to glue plastic

For fixing PVC corners are used:

• "liquid Nails";
• acrylic sealant;
• silicone sealant.

When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixation for the drying time. As a rule, such glue must be applied to one of the surfaces, pressed on the second, then removed, allowed to dry, and then firmly pressed on the part to be glued.

For the installation of polyurethane products, you can also use liquid nails or special glue.

Finishing wooden corners in the apartment

The surface of wooden corners must be protected with varnish or paint. The varnish will allow you to preserve the texture of the wood, the paint applied in a thick layer will hide it. If you need to give the tree some shade, while maintaining the texture, you should use a wood stain or tinting impregnation for wood.

Fasten wooden elements with liquid nails, wood glue or PVA. It can also be attached to finishing nails.

When driving a nail, the distance from the edge of the part to the nail must be more than 10 of its diameters.

How to stick a plastic corner on the wallpaper

The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the installation site is well glued to the wall, the wallpaper glue is dry. It is best to wait a few days after wallpapering and then decorate with corners.

How much dries

The drying time of the glue is indicated on the packaging, and rarely exceeds 12 hours. When sticking to silicone or acrylic sealant, it is desirable to keep the elements fixed for a day.

Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to assemble and dismantle, so it is quite possible to experiment if desired.

Useful video

A large number of building materials on the modern market allows you to decorate the interior of a house or apartment in a variety of decor options. This applies to walls, ceilings, doorways, window slopes, etc. But in order to give the lines a finished look and protect them from deformation, they use protective plastic corners that are easy to install, durable, practical and affordable.

Show all

Plastic profiles to protect the outer corners of the walls

Perforated metal or plastic corners are used even at the stage of plastering and leveling walls and ceilings using drywall. Profile options are installed to strengthen the finishing layer of putty and give joints and lines in two planes an ideal geometric shape. With the help of these materials it is easy to align, at least visually, the outer and inner corners, even on the most uneven surfaces.

This material for finishing the outer corners of the walls has a number of advantages, among which experts distinguish such as:

• Reliable protection. No matter how carefully you treat the decorative finishes in your apartment, without the use of these plastic parts, scuffs, scratches, chips and other marks appear at the joints of the walls after a few months. Especially if there are pets in the room.
• Elimination of cracks and gaps. The plastic corner does an excellent job of solving the problem on any curved surfaces between wall panels.
• Improvement in appearance. A variety of options and colors allows you to transform the decor of the room and give it a finished and beautiful shape.



But not only on the outside, plastic corners are used, they are also used to protect internal joints in order to hide the visible transition from different types of finishes, for example, drywall or MDF panels with wallpaper and wallboards.

Plastic corner - features of production and application

When sealing corner joints and irregularities on walls and ceilings, profiles made of silicone, polystyrene, polyurethane or PVC are used. The last PVC option remains the most popular and in demand due to its versatility and practicality. Such species are not used only as "flashing". When it is necessary to close the outer line of the window opening, metal counterparts or MDF panels are better suited for this.



Otherwise, the popularity of the PVC corner is due to good flexibility, durability, ease of installation and adhesion of the material with various types of glue. Another plus is the affordable price, which is why the finishing corner is used if necessary to decorate large areas.



According to the shape, on which the specific area of ​​\u200b\u200bapplication depends, the following options for plastic corners are distinguished:

• L-shaped and T-shaped. They are used to seal joints, cracks, seams and create an even edge and an angle between plates or panels of different types.
• Standard (P-profile). Designed for decorating window slopes, arches, interior openings, etc.
• F-shaped. It is used as a material in the arrangement of slopes to close the joints of PVC panels and walls.

Corners are produced in several sizes and in almost any color, like wood, natural stone, etc., depending on the specific conditions and finishing tasks. For installation at the transitions between wallpaper and decorative plaster, the smallest corner of 10x10 mm is enough. For other interior work, materials with dimensions of 20x20 or 25x25 are used, which are considered universal. Large views (50x50 mm) are used mainly for finishing external arches and the facade of the building.

Finishing slopes and bathroom

One of the areas of application of the PVC corner in repair and construction is the sealing of the slopes of doors and windows. This material is ideal for closing outside corners. The traditional technology for the manufacture of slopes involves the use of drywall and plaster with mandatory reinforcement with a special metal profile with perforation.



It allows you to create perfectly flat surfaces and geometrically align the planes, but after the final finishing, the open edge remains unprotected and here a plastic corner comes to the rescue.

They close the ends of the facing panels and other external joints, as well as the intersection lines of the window sill and walls. Dimensions are selected based on the width and height of the window opening.

Such a corner is also indispensable when decorating a bathroom with tiles laid out on the walls. L-shaped profile close the seam between the bathroom and the wall. Due to its properties, PVC is ideal for a humid atmosphere and warns against the appearance of fungus at the joints and the passage of water.



Corners are also used to close gaps and joints at entrance and interior doorways, especially when used in lining, PVC or MDF panels.

The use of "arched" corners in the decor of the room

The arched version of the doorway is becoming more and more popular, as it gives the room a solid look and frees up real and visual space. Internal arches are most often made of a metal frame with drywall or wall foam blocks with a special layout.



In this case, joints and corner transitions from slopes to drywall are closed with a decorative plastic profile. To do this, the corner must be bent correctly so that it does not crack or break. Therefore, when improving the arched corners, a special plastic profile is used or a regular one is cut into small segments of 25-30 cm each.



For arches, a corner of an unequal variant with a size of 17x5 mm is ideal. It bends without distortions and fits well on the adhesive base, without peeling off the edge of the wall. With a small radius of the arc, "hot" bending of the profile is used. To do this, as it is being installed, it is heated with a building hair dryer to a temperature of 60-70 degrees and rolled against the wall with a soft paint roller.

The process of installing plastic corners is simple. The progress of work is no different from sticking a skirting board or polyurethane glazing beads. The main thing is to properly prepare the material and handle it as carefully as possible so as not to scratch or damage it.

When gluing slopes, first measure the length of the profile for each slope angle. Most often they have a rectangular shape, which means that all joints are made at right angles and the joint line is cut at 45 degrees. For arches or multifaceted vaults, the angle of the cut is determined locally.

After taking measurements, proceed to the correct cutting. To do this, use a sharp knife or well-sharpened scissors. If there are no such tools, then use an ordinary hacksaw for metal and a ruler for an even cut. All burrs and irregularities are treated with fine-grained sandpaper. Next, perform a preliminary measurement. The blanks are installed at the place of gluing and aligned with the building level and pre-fixed with masking tape in several places.



After that, it becomes clear how correctly the angular cut of the product was carried out at the junction of the two profiles. Sometimes it happens that a gap appears at the joint line (1-3 mm), especially for those who work with this material for the first time. To avoid this, allow an allowance of 2-3 millimeters to the initial measurements, and erase the excess with the same sandpaper.

Gluing process and selection of suitable material

Before proceeding to the final stage of the installation of the plastic corner, it is necessary to choose the right glue. Construction stores offer compounds called "liquid nails", they are also used by some craftsmen. But this tool cannot be called universal, it is only suitable for fixing thin and small profiles to a flat wall surface.

To close the slopes or gaps between the tiles and the bathroom, in complex arches and transitions from one material to another, it is better to use liquid silicone. It is classic, transparent or colored, mostly white. Silicone does not shrink, does not drain, unlike liquid nails and ordinary glue, which tend to chip and crumble over time.



This is especially true for places with a high level of vibration, in doorways, window slopes. In the bathroom, silicone will not only securely fix the corner, but will also serve as an additional gasket from water ingress and the formation of fungus due to constant humidity.

The sticker technology is simple. Silicone is applied to the inner surface of the profile along the entire length. If glue and the corresponding compositions are used, then they are squeezed out of the tube pointwise, at a distance of 10-15 cm from each other. You should not cover the entire corner with glue, it will be impossible to press it evenly, and the remaining glue will stain the surrounding finish, it will be problematic to remove them later.

The corner is installed in place of gluing and gently pressed, and then set as evenly as possible according to the building level and ruler. Additionally, they are fixed with several pieces of adhesive tape or electrical tape so that it does not change its position. Squeezed out adhesive residues are removed with a wet rag or paper towel; when working with silicone, the excess is removed after setting and drying with a clerical knife.



When joining a horizontal and vertical profile, a long bar is installed first, followed by the top one. It is also glued, but be sure to apply a small amount of adhesive to the corners of the joint and then allow the planks to fully grasp, usually it takes 15-20 minutes.

The plastic corner is used not only when decorating the interior, but also in the exterior version, in summer cottages, a bathhouse, a wooden house made of timber with clapboard, on panel facades, etc. The material gives the structure completeness and additionally protects the tree from excessive moisture and other climatic impacts. Affordable price, durability and a variety of shapes and colors make the plastic corner an indispensable and reliable interior detail.

When furnishing a house or apartment, they often face the problem of what to put in a corner or how to occupy it so that the place is not empty and looks beautiful. If you think about this issue correctly, then this space can be used really efficiently.

We offer a few ideas on how this can be done. For convenience, we divide them into subparagraphs, based on the location of the corner:

• In the room
• In the hall
• In the kitchen
• In the nursery
• In the bedroom
• In bathroom

Shelves

Several small shelves located in the corner of the room will immediately perform both a decorative and practical function. Place photos or figurines on them and see how much your room will change.

Corner for creativity

Furniture can also be placed in the corner if decor and space allow. This desk or work desk is ideally placed, close to windows on both sides, providing good lighting and making it possible to both work and read in a pleasant atmosphere.

Small corner table

Such a table is not intended for writing or eating, it, in fact, has the role of a shelf for several photos, a table lamp, a vase of flowers or similar decorative elements.

Reading nook

Another great idea is to create a reading nook in one of the empty corners of your home. Find a sufficiently lit corner (closer to the window) and equip it with a pouffe and a floor lamp. In winter, add to this a warm soft blanket and the perfect place to spend your free time reading your favorite books is ready.

Like as a photo - in this article

Another photo idea for setting up a reading or thinking corner. You can just put a chair, or you can also hang it with curtains, shutting yourself off from the whole outside world for a while and plunging into your own.

An armchair in the corner near the window also makes a good place to read. Just a fabulous place to read and relax. Here you have to make more effort than just laying a pouf, but it turns out incredibly cozy.

Home cinema.

The corner of a room is actually a very good spot for a TV because it allows you to see it from almost anywhere in the room. Arrange armchairs and sofas around and enjoy watching movies and TV shows.

TIP: if you don't have a special corner TV cabinet, just put it in the corner on the bedside table, the end result is the same.

In this case, in the corner we put not a TV, but a sofa of a special shape. The whole family or a group of friends will fit, stock up on popcorn and enjoy watching.

Mirrors

Beautifully framed mirrors can also do a good job of filling up an empty corner space in a room. This will give the room more light and a cozy atmosphere.

Hangers

The hanger is very helpful when you need to get something from the top shelves of the closet, with it you do not have to risk your life and put a chair on a chair to get what you need. But its storage in the apartment takes up a lot of space, and the view is not very aesthetic.

But this idea will solve all the problems: use the steps of the stepladder as a hanger for blankets and its appearance will immediately change and you can take blankets as soon as you want to wrap up and warm up.

Library

Pay attention to how effectively this corner is made, all the shelves complement each other perfectly. Standing in one place, you can reach almost any book. Of course, not many people have a piano at home, but even without it it will look very good.

Tea corner

It is very convenient to have a corner bench or a sofa in the living room, put a small round table there, and you will get a cozy place for tea drinking or pleasant conversations.

Plants and vases

Plants, especially large ones, are a very beautiful decorative element and are suitable, in fact, for all rooms. However, they take up a lot of space, so the corners are perfect for them. Plant a flower in a beautiful large vase and it will wonderfully complement your home interior.

Floor lamp or floor lamp

A floor lamp placed in the corner will gently illuminate the room, creating a cozy homely atmosphere in the evenings.

Empty corner in the hallway

Photos on the wall

Fill an empty corner with paintings or photographs, organize a small art exhibition at home. It will definitely please the eye more than bare walls.

book shelves

Corner shelves with books can be placed not only in the hall, but also in the hallway. Of course, a full-fledged library will not fit here, but you can arrange your favorite books and figurines. More ideas in this article!

Brought finds

Make a mini museum of your travel adventures in the corner of the hallway: surfboard, large wooden statues, paintings, photos or posters, do not let it all gather dust in the closet.

In the kitchen

Corner cabinets

We wrote a separate article about - 30 ideas, we will open some tips here. Such a wardrobe is very practical and beautiful, while it practically does not visually reduce the room. You can arrange cups, vases and various decorative elements on the glazed shelves.

Round table

A small round table with four chairs placed in the corner is a good option for apartments with small kitchens. A great economy idea would be to use old chairs or a stool. - see here.

In the nursery

wigwam

In a children's room, you could use a corner as a place for a wigwam. Kids love tents, but putting it in the middle of the room would take up too much space, and the corner fits just right.

little stage

Having hung two beautiful curtains, the corner miraculously turns into a small stage. Here, children can play, develop their talents, or even arrange a small home theater.

In the bedroom

Double bed

If your bed is in a corner, then make a double headboard. This is practical, because during sleep, the soft back will not allow you to accidentally hit your knee against the wall, and it looks more symmetrical and beautiful.

Table or nightstand

A small table or bedside table, placed in the corner near the bed, is a convenient place to put the watch or earrings taken off before going to bed, as well as the phone with the alarm turned on, a glass of water and a book that you read before bed.

In bathroom

Corner bedside table

Bathrooms in many apartments are made so tiny that it is especially important to use really every possible space in them. A corner bedside table will help organize the space as best as possible, place all cleaning supplies and clean towels.

When you make repairs with your own hands, if you are not a professional in this matter, many questions arise that require an immediate and correct solution. This also applies to finishing the corners in the apartment. Corners are external and internal, rectangular and not very. And now the problem arose, how to put them in order, that is, if possible, straighten and decorate. Internal corners are often not very noticeable due to their curvature, because they are hidden under wallpaper or under decorative plaster and filled with furniture. Another thing is the outer corners. They are usually always in sight. But let's try to figure it out and find ways to solve this problem: during the repair, correct the curvature of the corners allowed during construction and somehow transform the corners.

So, internal corners walls can be aligned in several ways, and here are the two most common:

• by plastering the corner and adjacent wall
• corner correction with drywall

Plaster of any surfaces, as you know, the process is rather laborious, dirty and lengthy. If you decide to go this way, calculate in advance all the pros and cons. We need to see if the angle is far from perfect (90 degrees). If the error is too large, then there is a lot of work to be done, because along with the corner, you will have to plaster most of the wall. And more than 2 cm plaster cannot be applied, otherwise the thick layer will crack. And you will have to do this work several times, applying layer after layer. You need to figure out if you really need this ideal angle, or maybe you can leave everything as it is, limiting yourself to its decorative finish. If you still decide to plaster, use a metal corner called countershulz. The corner is pre-primed and the counter-shulz is glued onto the putty, slightly pressing it into the still soft putty mixture. This corner will provide the desired right angle. The contraschultz is equipped with a reinforced mesh on both sides along the edges, which will go under the plaster and thereby make the corner strong and even.

With help drywall You can even out a variety of irregularities on any surface. If the curvature of the corner is small (up to 2 centimeters), then a frameless method of mounting drywall sheets is used. If more than 2 cm, then a frame is constructed from wooden bars or metal profiles and drywall is attached to them. The advantage of this method of aligning corners and walls is that with the help of drywall sheets you can achieve almost perfectly even walls and right angles in the room.

But there is a big minus - the room is getting smaller.

Which way to choose, decide for yourself. Whether or not to align the corners and walls is also a question for everyone to decide for themselves. And if you think that decorating uneven corners will be enough, read the article further.

If there are children or pets in the house, then the outer corners are especially vulnerable. The wallpaper will peel off, the decorative plaster at the corners will fall off. Bad picture. But is there any way to exclude this process? Certainly! After all, a lot of decorative building materials are now on sale that allow you to do this.

I chose plastic corners for myself to protect external corners in my corridor from damage. This is the outer corner, covered with wallpaper. We recently renovated and the wallpaper is still fresh.

But if you look closely, the corner looks like this: an ugly joint between different wallpapers.

I measured the height of the corner from floor to ceiling and bought a plastic corner from the hardware store. I cut off the desired size with ordinary scissors and smeared it with liquid nails inside.

And finally glued to the corner. Agree, so much better. Of course, it was possible to pick up a corner in a different color, but I wanted a contrast.

This is what it looks like up close. The corner in our corridor began to look neater and minor irregularities disappeared.

As you already understood, the outer corner can be leveled and protected from damage using plastic corners. Now we are talking about those corners that are glued directly on top of the wallpaper. In hardware stores, they are presented in different colors. The length of the corners is usually 3 meters, but the width is different: from the narrowest to the widest. You need to choose the width, depending on how much the corner is curved.

The larger the flaw, the wider the corner will need. Look at the photo below, in stores you can find rectangular and even semicircular corners. Before you buy, think about which corner is best for your case.

But there are also such corners that are glued to the outer or inner corners even before the wallpaper is pasted onto the walls. These corners are glued to the inner or outer corner, puttied and due to this the corner becomes much smoother. Wallpaper is glued on top, decorative plaster or other fine finishing is applied.

As mentioned earlier, with a plastic corner, you can close both the outer and inner corners and even the joint between the wallpaper. But then it will not be a corner, but a plastic strip. Some decorative plastic corners are equipped with adhesive tape, removing the protective layer from which you can stick the plastic on the wall without using glue.

Plastic corners look good on walls with wallpaper. But plastic does not fit very well with tile. But if you don't mind a combination of plastic and tile, you can use them together.

There are plastic corners that look like metal, such corners can fit almost any tile.

Ceramic corners can also be used to finish the outer and inner corners of walls with ceramic tiles.

If the outer (or inner) corner is far from perfect, you can hide its flaws under a decorative stone.

In construction stores you will find the shade and shape of artificial stone that you like.

It is not for nothing that the expression “secluded corner” appeared, which carries not a geometric meaning, but the concept of a comfortable organization of space, a calm place in which it is pleasant to be. Since ancient times, the corner has occupied a special position: in Orthodoxy, this is the most fertile place in the house, in the Taoist practice of Feng Shui, it is a mystical space that “pumps out” negative energy. Today, few people give it a magical meaning, but an empty corner in a residential building looks sad. When a large part of the population lives in cramped apartments, functionality becomes one of the most important criteria for home design. In addition to internal corners, you can and even need to pay attention to external ones: they are the most susceptible to shock loads, and they must be provided with sufficient strength.

How to finish the corners of the walls in the apartment

First, let's look at several ways to decorate the outer corners. They are not protected by anything and due to frequent interaction with other objects (friction, impacts, etc.) they quickly become inappropriate: the wallpaper is torn off, the paint sticks, cracks and chips appear, light walls at the joints darken, get dirty, and on dark ones show wear. To prevent such consequences, there are many high-quality methods, and most importantly - stylish options for finishing the outer corners. A huge selection of finishing materials allows you to decorate the walls in the most unusual solutions.

Plastic corners for walls (colored and white)

One of the most practical ways to decorate external corners in an apartment is plastic corners. They are often used in conjunction with perforated metal profiles, which allow, at the stage of leveling the surface for painting or wallpapering, to give an uneven corner an ideal geometry. Such a “duet” will surely make the corners stronger and, of course, visually improve them. Plastic corners perfectly perform their functions without mounting profiles, namely:

• fully protect the corners at the joints of the walls from various traces, chips and scratches;
• hide existing problem areas;
• mask the transition from one type of finish to another, zone the room;
• eliminate gaps and gaps between wall panels;
• enhance the look and refresh the wall decor.

White corners are the most widespread, as they look neutral in almost any interior. Multi-colored options (including those reproducing various textures) look original and can be used as an element of any style in the interior, and contrasting colors of the walls will divide the room into zones.

But most often the corners are selected to match the partitions or from similar raw materials. The main materials from which the products used for decorative purposes are made:

• PVC;
• polystyrene;
• polyurethane;
• silicone;
• wood;
• metal.

The most popular is the PVC corner. Reasons for its popularity:

• easy processing of the material (it can be cut to the desired size without problems);
• flexibility (suitable for arches or other plastic shapes and curved surfaces);
• simple installation (you can glue it quickly, even with your own hands, lasts a long time);
• wide color palette;
• democratic value.

Its use is also very popular in the bathroom at the junction of plumbing with the wall. It is impossible to do without installing decorative plastic corners in areas of constant physical activity (for example, vestibules, window and door slopes). Also, the appearance directly depends on their size, shape and texture.
For fixing, the following means are used:

• liquid Nails;
• acrylic sealant;
• silicone sealant;
• bead nails;
• self-tapping screws.

It is important to remember that each material has its own way of connecting to the surface. It is necessary to take into account its combination with the wall covering (for example, plastic corners are not suitable for wall cladding made of wood).

Finishing the corners in the apartment with decorative corners is one of the most practical and convenient ways.

Corners from any material can continue the skirting on the walls

Universal flashings for windows and doors

Door and window flashings are designed to tightly close a certain hole, gap or potentially vulnerable spot (for example, a seam, a joint between surfaces). They not only eliminate the visibility of the gap, but also prevent drafts. The flashings can be internal and external. For the greatest efficiency, you can use both options: the first will be more responsible for practicality, the second for aesthetics. Universal flashings are usually used for windows and doors. They come in a variety of materials:

• plastic;
• wood;
• metal.

The choice of product depends on the material of the finished surface. The color scheme and texture of the decor item should be based on the parameters and features of your window profile.

Window flashings are used as protection for mounting foam at the junction of the frame and opening (because the foam does not tolerate ultraviolet radiation and becomes unusable over time), as well as for its intended purpose - as additional wind protection. For a finished look of the junction of the window frame and the slope, a flashing with a silicone coating is used. When installing on the reverse side, a special self-adhesive layer is applied (otherwise, self-tapping screws or screws are used). As a waterproofing agent, flashings are often used in the bathroom. This item is durable, resistant, unpretentious to climate and humidity.

Wooden corners

The design of external and internal corners with wooden objects is very popular. Wood is the most environmentally friendly material for corners of all types with increased strength characteristics. Most often, products are used to decorate the corners of door and window openings, walls. But the latest design ideas have made the corner in demand for all kinds of decorative solutions, so today they can be used regardless of the wall covering. Their combination with laminate or furniture made of the same type of wood is welcome.

These models are somewhat more expensive than plastic ones, but the price is justified by their appearance and quality.

Finishing corners with natural stone

Stone - one of the oldest building materials, does not lose popularity today. Such cladding in the interior always looks expensive, creates a feeling of a slight touch of antiquity, which gives the room a special charm.

Finishing with natural stone is not a cheap pleasure, as it is an environmentally friendly and safe material, in addition, it is heavy-duty and durable. In today's world, filled with technical devices, low-quality plastic consumer goods, a person sometimes wants to feel a little closer to nature. A wonderful feeling of unity will contribute to the decoration with natural stone, even in small quantities (for example, in the corners of the apartment).

It is the joints of the walls that are subjected to greater pressure from the owners, so finishing with natural stone will protect them from damage by 100%. It is important to consider that some types of raw materials require periodic care (washing, brushing).

The disadvantages include the fact that, if used incorrectly, framing the corners with natural stone can bring gravity into the space. But with proper use, even the internal joint, allocated to a separate zone, will be very cozy and neat.

To decorate the corners in the apartment, the following breeds are used:

• sandstone;
• slate;
• limestone;
• dolomite.

The following types are used mainly for the exterior cladding of the building, however, they can be found (in exceptional cases) in the finishing of corners inside the apartment:

• marble;
• granite;
• river and sea pebbles.

Natural stone for finishing can be in its original form (chipped, torn natural relief) or processed. Many resulting factors depend on this (for example, whether damage will be noticeable on it, style, and, of course, cost). It is not recommended to cover the stone with paint.

Many types of masonry are used - plate, plateau, castle, rondo, assol, etc.

Finishing corners with artificial stone and brick

Today, decorative stone trim is in great demand. There are many reasons for this, they are quite justified:

• artificial stone protects corners from mechanical damage no worse than natural;
• the material is light, comfortable and practical, does not require special care (because it is smoother, it is enough just to wipe it with a damp cloth);
• with the help of modern technologies, it is possible to recreate almost any type of stone with amazing accuracy, keeping within a smaller budget;
• looks stylish and modern, not so heavy.

Artificial stone is combined with almost all types of materials, so it can be successfully combined with other design solutions in a variety of styles, since the shape, color, relief and dimensions can be completely individual. It is more suitable for painting, easier to operate at the finishing stage.

Depending on the manufacturing technology, there are several types of decorative stone:

• rubble (similar to boulders and pebbles);
• chipped (imitates raw rock);
• sawn (clear geometry, unpolished surface);
• mosaic (imitation of many small stones, fitting to a specific composition);
• brick (imitates various types of brickwork);
• tiled (similar to natural polished stone).

And not so long ago, another completely unusual look appeared - fantasy. It has a complex shape and colors that are not found in nature.

Also, natural brick is often used as a decorative finish. However, it cannot be attributed to natural stone, but it is not synthetic either.

More often facing corners are used in the hallway. This is due to the fact that most of the dust and dirt accumulate in this room, but you can get rid of them with such a finish quite easily (using only water). If you decide to use household chemicals to clean the surface, then it will not spoil the material at all.

Types of decorative stones can be combined, creating unusual images and ornaments.

Finishing with artificial stone of the inner corner and opening

Corner protection with moldings and MDF panels

Molding is an overlay decor in the form of a three-dimensional plank, it gives any object a more complete, expressive and sophisticated look. Most often, moldings are found from plastic:

• polyurethane;
• polystyrene;
• foam.

These materials are resistant to external influences, characterized by an affordable cost.
Also found in:

• gypsum;
• marble;
• tree.

They are more expensive and not as practical as modern plastic ones, so they are more often used in the design of historical interiors.

Decorating with a three-dimensional plank is especially often used to protect corners at the junction of walls and ceiling, floor. We are well acquainted with ceiling and floor moldings - the so-called skirting boards. The decor for the corners of the ceiling can be within a certain style and combined with other decorative elements (for example, stucco, bas-relief).

Corner moldings for framing external corners are used if ordinary plastic or wooden corners do not fit the style of the room.

The combination of corner moldings, MDF wall panels and decorative moldings in the interior

Corner tiling and mosaics

In some rooms, walls can be tiled (in the bathroom, in the kitchen). At the junction of surfaces, special inserts are used - trims that play the role of corners. They are attached to the tile using silicone or acrylic sealant. There is also such a type of tile as a corner tile, it will allow you not to interrupt the masonry, but to make a smooth transition from one surface to another.

High-quality and stylish mosaic masonry will decorate the walls no worse than any other type of decoration. Materials can be synthetic or natural. Corner joints in any of these cases may not necessarily be framed with decorative corners, it is enough to bring the ends of the tiles of the most visible (frontal) side to the surface of the less noticeable (lateral) part of the mosaic cladding. Mosaic can be glass, plastic. You can decorate the joints in this way in the form of any pattern or ornament.

We fill empty corners in the apartment

Not all corners require finishing and cladding. Most of the internal joints remain unfinished, but the free space in them is successfully filled with various decorative elements.

Shelves and racks

Triangular racks and shelves will help turn a useless empty corner in the apartment into a convenient place to store things. They do an excellent job of organizing space, do not look bulky and heavy. On the shelves you can arrange your favorite figurines, awards, stylish accessories that complement the interior, just cute things. The shelves are well stocked with books. Their types are extremely diverse:

• wall;
• floor;
• built-in;
• suspended;
• whatnots.

The most problematic rooms in the apartment in terms of storage are the entrance hall, kitchen, bathroom. It is here that residents most often do not know how to place all the necessary things compactly without compromising the appearance. Here are some tips: in the hallway, corner shelves can simultaneously serve as clothes hangers or stands for shoes and bags, and in the kitchen they put small appliances and utensils.

Modern designers offer many unusual ways of arranging shelves in corners, as well as sharing them with shelving. They can continue on the walls, even run around the entire perimeter of the room.

Corner rack will accommodate a lot of useful little things

The outer corner shelf will place decorative elements in itself and protect the walls from frequent contact.

Floor vases and flowers

Vases with a height of more than 40 cm are considered floor vases. Vases have been an item of luxury and prosperity since antiquity, today they also have the meaning of well-being. Often they are used as decoration of an expensive interior. Floor vessels can be of different shapes:

• vase;
• pot;
• jug;
• bottle.

With different textures, from different materials, for example:

• ceramics;
• porcelain;
• wood;
• glass;
• metal.

It is better to give preference to heavier, unbreakable materials, but if you decide to choose, for example, a glass vessel, then you can fill it for stability by pouring some stones (pebbles), shells or sand on the bottom. Also, expensive and especially valuable vases can be placed on special stands. Containers can be an independent element of decor or they can contain artificial or natural flowers, natural and decorative branches, bamboo stalks. The filling of the vase can be changed depending on the mood, season and other factors. If one pot looks distant in the corner, you can add "companions" to it.

Fresh flowers in pots are an essential element of almost any home. Large and massive plants will successfully take place in the corner, filling the room with greenery and beauty, making it cozier and more comfortable.

A vase filled with natural or artificial branches will perfectly fill the space near external or internal corners, as well as decorate the interior.
Corner furniture

In recent decades, such products have been in special demand, because they allow the rational use of space. Corner furniture will look great not only in a small room, but also in a very spacious one, helping to get rid of empty useless joints. At first, kitchen sets gained popularity, but today all kinds of options are known: sofas, cabinets and even entire workplaces consisting of a computer desk, cabinets and shelves.

The walls will advantageously fill the free space and accommodate a lot of useful little things, necessary gizmos and even equipment. Cabinets and walls in the hallway and hall will allow you to place even large items in this place, they will easily replace the dressing room or pantry.

The corner sofa itself is larger than usual, it can accommodate more people.

An interesting design solution: a corner cabinet turns into a compact comfortable workplace in one motion

Lamps and figurines

Lamps and figurines, well matched to a particular style, will complement the interior design. If you place them in the corners, it will significantly enliven the space, complete the image of the room. Lighting devices and various decorative figurines can be completely independently placed in a corner or on any other structure (on a shelf, whatnot, chest of drawers, in a closet, etc.). If you decide to choose a floor option, then the main rule applies here - it must be stable enough for its dimensions and “hold out” in case of unforeseen mechanical interactions with it.

Mirrors

A mirror in the corner will be a great option, as it will help visually “smooth out” it, thereby filling the space, and also create the illusion of additional expansion of the room. It can be independent or be an element of any corner furniture. It is advisable to use two narrow mirror canvases, which are mounted at the junction of adjacent walls, which will radically change the geometric perception of space. Floor mirrors, screens will be a great addition to the decor of the corners in the bedroom and hallway.

Fireplaces and stoves

The fireplace in the corner can be fake or real. More often they install artificial ones, less often it becomes a full-fledged heating device that runs on electricity or biofuel in apartments or traditionally on wood in private homes. In the absence of a heating element, the wall inside can be made mirrored.

Corner fireplace with artificial flame, successfully placed on itself decor elements

Other decor

Not sure how else to decorate the corner of the wall in the room? There are many other simple ways:

• an art gallery or a thematic selection of photos;
• all kinds of decorative elements mounted on the ceiling (pendants, lamps, flower pots);
• a full-fledged place to relax, consisting of a small sofa, pouffe, armchair, bean bag;
• cage for rodents or birds.

Also in the corner you can place an aquarium.

Original exterior corner finish with built-in aquarium

Plasterboard corner structures and niches

Thanks to plasterboard structures and niches, you can significantly change the geometry of the room. From this, it will not become smaller, but, on the contrary, it can expand due to a more rounded shape and the elimination of excess empty space. Niches, including those containing additional plasterboard shelves, in the corners can be used:

• for books;
• under the TV;
• under the fireplace;
• under the aquarium
• for figurines and toys.

Plasterboard structures without niches are an independent element that serves specifically to adjust the shape of the room.

Such niches round the corners, visually expand it

Decorative corner lighting

To highlight the corners or any objects in them, LEDs in the form of lamps, garlands, ribbons will help. In addition to the standard central lighting in the room, they highlight a specific area. LED strips can frame a corner along the perimeter or create an unusual pattern or ornament in it, giving the room a charming atmosphere, creating an amazing atmosphere. Sometimes such lighting serves as a replacement for the traditional one. It will be interesting to look at the framing of all ceiling corners around, around the perimeter of the room. Now this trend is gaining popularity.

Now you are familiar with the many ways how and how to finish the joints of surfaces, so you can easily choose the decor on the corners of the walls in the apartment, limiting yourself only to your imagination!