Bathroom in a 9-storey building. Finishing a bathroom in a panel house

The budget solution to the housing problem is an apartment in panel house. And if the owner always tries to somehow transform the kitchen, corridor or living room, emphasize his individuality, then the bathroom in the panel house remains the least thoughtful room.

This is because the planning options for "Khrushchev" and "Brezhnevka" limit their owners to size and comfort. Ultimately, the occupant adapts more to his home than he creates space for himself.

This is especially true in the bathroom. According to most, inexpensive tiles and simple plumbing are enough to meet the basic needs of a hygiene room.

However, modern market building materials allows you to make the bathroom as convenient and efficiently planned as possible, to realize any bold ideas for its improvement.

Room planning

First, you should consider building a separate or combined bathroom.

Combining a bathroom always wins in that it increases its usable area, which allows more flexible planning for the installation of plumbing, furniture and lighting.

You can also save on finishing materials: demolished to be tiled common wall, and finishing a doorway that has become a wall will be cheaper than installing a new door.

Such a renovation of a bathroom in a panel house is convenient for young families or older people living without children.

If the space in the toilet allows you to install a small sink with a mixer and a pseudo-bidet in it, and a bathtub - washing machine, then you should not combine rooms. The exception is the personal wish of the owners.

Selection of bathroom equipment.

Having decided on the configuration of the room, you should organize its space. A small area does not allow you to install a bathtub and a shower cabin, a wardrobe and a washing machine at the same time.

Shower or bath?

A shower cabin will save a lot of space, but will deprive you of the opportunity to take a full bath, and for families with small children this is very important.

But a medium-sized corner bath can save space and serve as a convenient shower tray.

Do not seal the niche under the bathroom tightly. Equip it with a storage door household chemicals and cleaning equipment.

Where to put the washing machine?

Repair of a bathroom in a panel house is always done to create more comfort for the owners of the apartment than it was before.. Starting it, it is worth taking a fresh look at the installation of large household appliances.

There are three options for installing a washing machine:

1. next to a bath or shower without a partition from them. Drainage from the machine is organized directly into the plumbing through a special outlet or sewer. This is the only option for top-loading washing machines;
2. behind the barrier. Its installation allows you to create a small niche above the washing machine, possibly with decorative lungs doors.
   This provides additional space for collecting laundry, storing bath accessories or cosmetics;
3. under the sink.

Selection of finishing materials

At first glance, it seems that a bathroom in a panel house is not very demanding on finishing materials.

However, not only future comfort, but also the meaning of all work depends on their variety and quality.

Ceiling.

1. Whitewashing is the last century. It should be abandoned immediately.
2. Painting. The method is laborious, requires careful surface preparation and costs.
3. Plastic tiles. Installs easily. At high humidity, mold can appear at the joints, which will ruin the coating.
4. PVC panels. They allow you to hide the flaws of the ceiling, hide the ventilation and install spotlights. Easy installation.
5. The rack ceiling is more durable and more aesthetically pleasing than the previous one.
6. . Installed by experts only. It has all the advantages of panel and rack ceilings. More reliable in a damp room, as it does not have slotted joints.

Of the many varieties of finishes, it is best to provide high sanitary and hygienic conditions and decent appearance- tile.

Separate areas of the bathroom that are not directly exposed to splashes can be decorated Venetian plaster, moisture resistant wallpaper, wood and other materials. But it should be taken into account that due to the tightness of the room in the process of its use, the wear of such coatings will increase.

As it was said the best option will be tiled. However, polymer bulk is also durable and beautiful. Both options allow you to install a "warm floor" system.

If you do not use a “warm floor”, then for additional comfort it is recommended to make a removable grating made of oak or larch slats.

Bathrooms in a panel house are not a relic of the past. At proper organization premises and quality accounting modern means these premises acquire a new functional form and originality.

Choice of bathroom lighting

by the most right decision there will be installation of spotlights in the bathroom. For achievement best level illuminations need to take care of their quantity. It is best to adjust the saturation of the lighting with a dimmer created for this.

An alternative way is to install fixtures in the bathroom that have lamps with a cold and warm spectrum. The former make it possible to relax, while the latter, on the contrary, contribute to an early awakening.

Gallery

Combining a bathroom and toilet is the hardest part of a renovation. It is important to understand that the repair and redevelopment of a bathroom and a bathroom includes several important components: documentary-technical, construction-assembly and design.

The bathroom and toilet are functionally close, so modern renovation there has been a trend to combine these two spaces in order to come up with convenient engineering and interesting design projects.

An example of a combined bathroom design

In domestic apartments ordinary panel houses a cramped bathroom and an even more uncomfortable toilet, and a successful redevelopment and repair of a combined bathroom can create a single space that will fit not only a standard set: a bath, a sink and a toilet, but also washing appliances, and a bidet, and functional furniture, for example.
It is important to understand: the repair and new design of the combined bathroom will require considerable costs and effort to documenting redevelopment, dismantling of walls and plumbing and sewer systems, development of a detailed plan for plumbing communications, a well-thought-out plan for the location of doors, all equipment and plumbing, space zoning, design of cladding, floor, ceiling, lighting, interior as a whole, while the previous layout of a small bathroom gave minimum opportunities for new solutions.

Documentary and technical repair procedures

Redevelopment and repair of a bathroom and a bathroom is impossible without obtaining official permission from the BTI (Bureau of Technical Inventory) of real estate objects.

Plan for the redevelopment of the bathroom in a lot storey building

On the this moment Officially, there are two procedures for agreeing the plan:

• simplified: redevelopment according to the finished sketch, which includes a simple demolition of the partition wall and an insignificant change in the location of the bathroom technical equipment;
• complete: with a global redevelopment, when the area of ​​​​the bathroom changes due to the space of the corridor or other rooms, and the number of sanitary equipment increases (the installation of a bidet or shower cabin is added, for example).

In the second, full, approval procedure at the BTI, it will be necessary to provide finished project changes, which is checked by specialists for compliance with plumbing standards and the possibilities of plumbing communications in an apartment building.

Important! Consideration of documentation usually takes 1.5 months, so prepare necessary set documents are required 2-3 months before the immediate start of the repair.

When combining a bathroom and toilet is prohibited or undesirable

There is a case when the layout of the bathroom cannot be carried out for technical reasons: it is forbidden to demolish the partition wall between the bathroom and the toilet, if it is a load-bearing wall.

Design project of a divided bathroom

Important! Not only BTI, but also the owners of apartments are responsible for the condition building structures and safety, therefore, before considering a redevelopment plan, it is imperative to clarify the location bearing walls in the House.

There are several psychological conditions under which the layout of the bathroom is undesirable. This is the presence of several children in the family and just more than 2 or 3 residents in the apartment: using the bathroom, sink, technical equipment and latrine at the same time will be subjectively difficult.

Dismantling works

Bathroom refurbishment starts dismantling works. This is the most "dirty" and laborious stage. Usually it can take 2-4 days, while the possibility or impossibility of resettling the owners of the apartment during the dismantling plays a big role: the need to use water supply and sewer communications can slow down the progress of work.

The process of dismantling the partitions between the bathroom and toilet

Demolition work includes:

• dismantling of doors and slopes;
• possible dismantling electrical wiring;
• removal of the old cladding;
• complete or partial destruction of the partition wall;
• complete dismantling of water and sewer systems.

Important! Typically, during dismantling, 30 to 50 bags of construction debris may be required.

New bathroom layout

In the new vacated space, the options for installing plumbing equipment are increasing:
there is an opportunity to install a shower cabin and additionally - a bidet, there is a new place for a corner bath or jacuzzi, you can take the chance to successful zoning space and delimitation of areas for bathing, washing, household area and latrine. In other words, a combined bathroom will require a different design, so the layout implies several options, given the location of communications, doors and all plumbing equipment.

Water supply and sewerage

The basis of any bathroom is the plumbing and sewerage systems, so it is the convenient, safe and reliable location of the pipes that should become key principle during repair. In reality, the combination of a bathroom with a toilet most often occurs according to a simplified redevelopment, in which the location of communications, proven over the years and by plumbing standards, remains unchanged.

Redevelopment with a change in the location of plumbing

So, with a typical arrangement of a bathroom and a toilet, after the destruction of the wall, the toilet bowl remains in the same place, the bath can be replaced with a shower cabin or its corner version. Then, in the place of one closed door, in the corner, a section for a washing machine appears, and the sink can find a place for itself on the left part of the partition wall or on the opposite wall.
A more detailed redevelopment of the bathroom and toilet is desirable with the participation of repair specialists and experienced engineers, since even a slight violation of the angle of inclination sewer pipe or wrong location siphon bath relative to the entire system can cause serious flooding.
Repair and redevelopment of a combined bathroom is also convenient because it allows you to hide a new one. plumbing system in false walls or drywall boxes, most naturally considering the location of important components of the plumbing and sewer systems and the plumbing hatch.

Plumbing equipment

Contemporary plumbing equipment can be extremely compact, which is undoubtedly convenient: the layout and renovation of a small bathroom and the installation of such equipment will significantly save space.

Installing compact plumbing will save space

So, they use ... rationally located built-in mixers, bathtubs that can have absolutely any shape and size: shortened (up to 1200 mm), asymmetric, with cut corners, angular, which allows you to fit required dimensions into a new spaceshower cabins, which can save even more space: their dimensions are usually 900*900 or 800*800 mm,numerous compact forms of toilet bowls: corner or hanging, also having small dimensions (356 * 480 * 370 mm),compact hanging shells can have dimensions from 350*470 mm.

Important! Saving space should not interfere with the convenience and practicality of use. People with large forms, it is better to find the best option for their size.

Doors, walls, wiring, floor, ceiling,

Combining a bathroom and toilet raises the question of moving and installing a door. Its location is better to provide away from the latrine. So that the toilet occupies the least noticeable corner at the entrance. The layout usually allows you to leave one of doorways in the same place and not move the doorway - this will save a lot of time and effort.
It is advisable to seal the extra door with brickwork. A more economical, less reliable, but high-speed option is moisture-resistant drywall.

Zoning the space of the combined bathroom

A good option for redevelopment is to leave part of the partition between the bathroom and the toilet, which will allow not only to zone the space of the bathroom and bathroom, but also naturally hide part of the communications related to the riser of the house.
The new bathroom layout will require new electrical wiring and lighting. Since the bathroom is a room with high humidity, it is necessary to provide high level wiring protection and easy access to its possible repair.

Important! Wiring should use only solid pieces of wire, double power and double insulation.
After dismantling the walls, the floor will require leveling with a new screed, and the ceiling will require careful puttying or installation of a suspended structure.

Cladding and interior design

The last stage - cladding and final interior design - is best done after several days of observing the operation of all communication systems in real action.
When the combined bathroom design is technically ready, it will turn out to be the most exciting event: installing mirrors and selecting fixtures, choosing colors and shades, furniture and accessories. However, all these details in general terms thought out at all stages of redevelopment: materials for plumbing, the overall color scheme and style of the room should be combined with the shapes and sizes of all details.

Moscow, st. Dushinskaya

Complexity of execution 7/10 Timing 17 days Estimate for work 81000 rub.

The task of repairing the apartment is to connect the bathroom with the toilet and increase the area due to the corridor.

The main task in the repair in the bathroom and toilet is to increase the usable area and make it as comfortable as possible. First of all, we connected the toilet to the bathroom. With this layout, it is possible to install washing machine to the bathroom and thereby unload the kitchen. Usually, connecting a toilet 0.8x1.15 to a bathroom 1.5x1.35 results in a combined bathroom 2.15 * 1.5 m., but we also increased the area of ​​\u200b\u200bthe bathroom, added 20 cm due to the corridor.

Eventually bathroom remodeling has dimensions of 170 * 215 cm. Now it has become easy to legitimize redevelopment, compared to the year before, when you had to go through a lot of instances, endlessly stand in queues, and wait a lot of time for decisions; or shift all these concerns to intermediaries and pay a good amount of money. Now you can do the design yourself and get permission without unnecessary red tape.

Even after the transfer of plumbing fixtures in the aisles of the bathroom, redevelopment can be arranged after repair work.

New in the bathroom

Some of the remodeling work we have done includes:
1. transfer of plumbing fixtures;
2. rebuilding partitions and shifting the doorway;
3. Newly built plumbing cabinet that hides risers. To access the taps and water meter readings, our craftsmen installed an invisible revision hatch, which is hidden under the tiles.

You can also note such a moment as the absence of a water heated towel rail after repair. Its use was considered inappropriate, as old pipe in the form of a zigzag, it barely warmed up and practically did not warm the room. It was decided to mount an electric heated towel rail and install it above the washing machine.

We rebuilt all the outer walls. The boxes for the bath and for the sanitary cabinet are made of drywall. When the toilet is rotated 90 degrees, part of the sewer pipe is also covered with drywall and tiled.

We increased the bathtub to 170 cm.

Now in new bathroom fits comfortably and large bath 170 cm, stand comfortably and do not interfere with each other, the toilet bowl and the washing machine, and the sink with a cabinet and a mirror fit well and comfortably opposite the entrance.

As ceiling covering It was decided to mount a slatted aluminum ceiling.

Laying ceramic tiles

Payment upon completion of work

Masters Slavs

twelve months warranty

Consultation, measurement, estimate - for free!

Full cycle of works: from measurement to delivery

Purchase, delivery, lifting of materials

We remove and haul away all rubbish

Free departure of the measurer

OUR BATHROOM REPAIR SERVICES

Demolition work. Dismantling of old structures without dust methods

Plumbing works - installation pipes of any complexity

Installation of electricians, wall chasing without dust method, selection of the optimal type of section electrical wiring Door installation. selection and installation of doors

Floor preparation. performance of waterproofing works Self-leveling floor devices

Rough wall decoration. Usage modern materials. Reduced drying time to 5 days. Plaster of any complexity

Wall finishing. Thorough preparation of surfaces for laying tiles. Uniform and high-quality application tile adhesive to exclude the formation of voids

Finishing the ceiling Selection of optimal materials. Environmental clean materials for stretch ceilings

Installation of plumbing. Selection and installation of plumbing. (Bathrooms, Shower cabins. Sinks. Toilet bowls. Faucets. Towel dryers.)

PVC paneling. Reduction of terms and Cost in comparison with a tile up to 3 times. Selection and pvc installation panels

Bathroom renovation in a panel house in Moscow

Repair of walls in the bathroom prices

0	Name	count	single ism	price
1	Dismantling of tiles (floor, walls) without preservation	1	m/2	250 r
2	Wall primer in (2 coats and all subsequent)	1	m/2	80 r
3	Wall plaster (for tiles)	1	m/2	450 r
4	Laying wall tiles	1	m/2	690 r
5	Laying wall tiles 10x10 or 15x15	1	m/2	900 r
6	Laying clinker tiles (stone, brick)	1	m/2	1400 r
7	Mosaic laying	1	m/2	1800 r
8	PVC panel installation	1	m/2	300 r
9	Laying a curb, plinth of tiles	1	p/m	450 r
10	Tile cutting.	1	p/m	390 r
11	Laying decor drawing pano)	1	PCS	220 r

A useful structural element is a false plasterboard wall with niches. You can hide ventilation behind it, water pipes, electrical wiring, installation system for toilet bowl and sink, concealed part of built-in faucets and so on.

Bathroom floor repair prices

1	Floor primer	1	m/2	65 r
2	Floor waterproofing	1	m/2	210 r
3	Self-leveling floors	1	m/2	270 r
4	Laying floor tiles	1	m/2	590 r
5	Laying floor tiles diagonally	1	m/2	900 r
6	Trimming tiles	1	p/m	390r

Floor waterproofing is a must when renovating bathrooms, toilets and other wet areas.

Bathroom ceiling repair prices

Modern materials for the ceiling in the bathroom - stretch fabric PVC or metal slats - look stylish and do not lose their good appearance for many years.

Plumbing work in the bathroom and toilet

1	Mixer installation	1	PCS	1100 r
2	Bathroom shower faucet installation	1	PCS	1400 r
3	Siphon installation	1	PCS	500 r
4	Sink installation	1	PCS	1800 r
5	Bathroom installation	1	PCS	3800 r
6	Pipe installation (oventrop)	1	p/m	900 r
7	Laying elements of fittings (oventrop)	1	PCS	500 r
8	Mirror attachment	1	PCS	2100 r

Bathroom renovation in a panel house

Most people treat the need for repairs with excessive self-confidence and do not turn to specialists. As a result of this neglect, long time correct mistakes. In order not to be mistaken and to do everything really well the first time, you need to contact the qualified specialists of the Stroy-Moscom company. We cooperate only with teams professional craftsmen who can actually perform quality repair in a panel building.

photo renovation of a bathroom in a panel house

BEFORE AND AFTER

Specialists are perfectly aware of the design and layout features of each type of house, so difficulties never arise. If you want to combine a bathroom with a bathroom, then we will do our best to implement the idea. It will be much more convenient to order turnkey services, which include:

Dismantling of old equipment and materials;

Arrangement of communications;

finishing;

Construction debris removal.

As a result, the client receives a completely finished bathroom, which can already be used for its intended purpose.

How to order a bathroom renovation service ?

You need to contact the phone number listed on the site and discuss the details of cooperation with the manager. The specialist will visit the site at the specified time, take the necessary measurements and help you choose Construction Materials. Describe the desired result in detail so that it can be accurately translated into reality. If you want to save as much as possible without losing quality, then there are excellent options for standard projects for every taste and financial possibilities.

Finishing materials are selected based on the specifics of the need for resistance to moisture and fumes. The surface will be resistant to deformation and mold after long-term use and washing.

Bathroom renovation PHOTO and PRICES:

EXAMPLES OF COMPLETED OBJECTS

Bathroom renovation: 2.6 sq.m

Quality and inexpensive solution for bathroom renovation. Plumbing replacement, modern tile on the floor and walls, perfectly flat floor. Everything you need to keep your home comfortable.

Moscow, Nametkina street. The total cost of work is 61,600 rubles

Bathroom renovation 3 sq.m

Optimal use of space in a small bathroom is the main task that was set in this project. Our specialists were able to place the necessary bathroom details in an energy-efficient manner without compromising the family budget.

Moscow, Vavilov St. Total cost of work 65,600 rubles

Bathroom renovation 3.5 sq.m

We recently bought an apartment where an elderly grandmother used to live. Our masters in the shortest possible time replaced all plumbing and bathroom interior, which has not been updated since the construction of the house.

Moscow city. Ostrovityanova st. The total cost of work is 81,600 rubles

Bathroom renovation 4.2 sq.m

The project to transform this bathroom became the embodiment of a dream. Our craftsmen brought the ideas of the customer to life as accurately as possible and completed all the technical work with high quality.

Moscow city. st Garibaldi. The total cost of work is 93,600 rubles

Don't know where to start renovating your bathroom?

Book a free survey engineer!

Our specialist will arrive at any time convenient for you

The measuring engineer will take accurate measurements of the room and offer the best options for planning the bathroom

Thanks to measurements and budgeting, you will know the exact cost of renovating your bathroom.

Half a century ago, panel houses were considered the most comfortable housing in the country. Their construction made it possible to provide shelter for many millions Soviet citizens. However, now the attitude towards them has become different. Such apartments are quite modest in size. In addition, the deterioration of panel houses is accelerated due to savings in their construction.

However, in Soviet times to have such an apartment was much more prestigious than housing in a communal apartment. Today, many owners of such apartments are trying to make living in them more comfortable. It is worth figuring out what options exist for finishing a bathroom in a panel house.

Features of the arrangement of the premises

Basic hallmark the bathroom in panel-type houses is a small area. If to expand the kitchen it is enough to remove the partition and make it look like a studio, then you can expand the bathroom only by combining it with a toilet.

Combining a bathroom in a panel house

Shared bathroom in the apartment panel house- a popular solution that has several advantages and disadvantages. The disadvantages of this solution include:

• When living in an apartment in a panel house for several people, using a combined bathroom is not very convenient. One family member may want to relax in the bath while another needs to use the restroom. In the morning, a queue is created in the combined bathroom.
• Any demolition of walls, even non-bearing ones, affects the stability of the panel house. Such redevelopment requires legalization.
• Demolition of the partition is a quick but troublesome procedure. A lot of noise and dirt is created in the process of work.

Before making a decision, you should familiarize yourself with the photo of the combined bathroom in a panel house.

However, combining a bathroom and a restroom has several undeniable advantages:

• When combining two rooms in a panel house, you can get a lot usable area. It will be very convenient to move around.
• It will be possible to correctly distribute the space using the zoning method. To do this, install temporary partitions in the bathroom and experiment with lighting.
• Much easier to install plumbing fixtures. Possibility to install in the bathroom household appliances large sizes. In such a bathroom it is easier to place an additional rack.

It is better to combine a bathroom when living in an apartment of one or two people. If the bathroom has a place for mounting a corner sink, and after installing the bath itself there will be space for a washing machine, it is better to leave the partition.

The choice of sanitary equipment

The main condition - plumbing must match the dimensions of the bathroom. If a massive jacuzzi is installed, it will look out of place. In addition, in a small bathroom it will not be possible to install necessary equipment. IN small rooms better mount equipment small sizes. When installing showers and sinks corner type frees up a lot of space in the center of the room.

When choosing between a shower cabin and a bathroom in a panel house, you should pay attention to the first option. Modern designs for taking a shower have more functionality than a standard bath. They can choose different types water jets, listen to music, call friends. Many booths are equipped in such a way as to receive water procedures in a sitting position.

Washing machine location

Washing machine - an essential element household. However, it is difficult to place a large-sized device in a small bathroom of a panel house. There are several ways to solve the problem:

• Install the washing machine under the bathroom sink of a panel house. This arrangement of equipment will allow an extra meter. To do this, you will have to equip a hanging type sink.
• Place the machine sideways to one of the walls of the bathroom of the panel house. On the other, place a partition, and arrange a locker above it.
• Place the machine close to the shower cubicle. This option is convenient when choosing devices with a vertical hatch.

These tips will help equip a comfortable bathroom in a panel house.

bathroom ceiling design

A ceiling with whitewash or plain paint, often equipped in prefabricated houses, can cause melancholy. For this reason, it is worth making rack ceilings. Using these elements, you can create original design bathroom in a panel house.

The advantages of such structures:

• attract attention and do not bother;
• there is a wide choice of textures and shades on the market;
• they last longer, and it is much easier to care for them;
• it is very convenient to place original lighting fixtures in them;
• you can equip a mirrored ceiling that can visually expand the bathroom space in a panel house.

When choosing the color of the bathroom ceiling in a panel house, you should remember that it should be lighter than the wall surfaces by several tones (as in the photo).

Bathroom wall decoration

The standard choice is to tile the bathroom. In small spaces, this is true. right choice. However, you should not stop at a certain type of tile. It is better to choose products with a pattern or pattern. If you have experience, you can choose a tile different shades that will harmonize with each other. The surface with a mosaic pattern looks interesting.

To make your work easier, you can equip the bathroom walls with PVC panels. Color solutions in this case there will be a lot, but less than in the case of tiles. Better run the walls in light colors. If the surfaces are too dark or bright, the visual space of the bathroom will decrease.

Floor arrangement

It is also better to equip the bathroom floor in a panel house with ceramic tiles. You should choose less slippery products. In order not to slip, additional panels are laid on it. They are made from durable wood. You can safely stand on such products with bare feet.

Another the best option bathroom floor equipment is bulk technology. However, it will take a lot of money. In a bathroom of a small area, materials are usually not saved. To keep the heat in the bathroom, a system of warm floors is installed.

Illumination and lighting

Spotlights are installed in the bathrooms. To create the desired level of lighting, there should be a lot of them. If possible, the light intensity is regulated by a special dimmer.

Another option is to install fixtures in the bathroom that have light bulbs with a cold and warm spectrum. The first will allow you to relax, and the second will accelerate the awakening.

Bathroom interior design

A bathroom in a 9-story panel house can become cozy room, if you approach the interior design correctly. There are a few things to keep in mind when doing this:

Having arranged the room taking into account these tips, it will be possible not only to visually expand the space, but also to create a favorable atmosphere for receiving water procedures.

conclusions

The best option when finishing the bathroom - gluing on the floor and walls ceramic tiles. This material is easy to clean, it is not affected by moisture and temperature changes. Using tiles will allow you to make a durable bathroom renovation. Interesting interior created using decorative plaster, self-leveling floors, false ceiling. Delimit the bath space with curtains or partitions. You should use the free space of the bathroom very sparingly - install additional shelves, a hanging sink and a shower stall.