How can I remove a stain from mdf doors. Cleaning grease stains from entrance and interior doors

MDF doors and furniture look stylish and beautiful in the interior. But greasy spots, formed on the surface, spoil the whole view. You can get them out in a variety of ways.

Before you start cleaning, you need to determine which coating: laminate; PVC; veneer; painted canvas.

Depending on the top layer, the cleaning method is also selected.

What Not to Do

Whatever material the doors are made of, do not use aggressive cleaning agents such as pure alcohol, thinner, acetone and acids.
Do not use abrasive products for washing, which can leave scratches on the surface.
Do not rub with a metal brush.

Using these products can damage upper layer canvases.

The stores sell various specialized cleansers: pencils, pastes, liquids and sprays. Before using them, you need to read the instructions.

Before using any method, it is better to test it on an inconspicuous part of the door, for example, at the end, from the side of the hinges.

Laminated surface

The laminated door leaf is covered with a thin protective film that facilitates maintenance.

Alcohol solution - dilute 1 part of alcohol in 9 parts of warm water. Dip a soft cloth in this solution and wipe off the dirt. If possible, apply the cloth for 5 minutes to the surface. Then wipe with a dry cloth.
Soap solution - commercially available liquid laundry soap 72%. It works great on grease stains. Wipe the surface with a cloth dampened with soap and rinse warm water. This must be done quickly so that moisture is not absorbed into the door leaf. If there is no liquid soap, you can grate half a bar of laundry soap and dilute it with warm water, or simply rub the sponge thickly with soap.

PVC surface

Their PVC film protects the canvas. She may be various shades and have a drawing. She cleans up well different ways. It is important not to allow the door to get wet for a long time so that it does not swell.

Mix equal amounts of liquid soap and sanitary ware. Sponge on the stain and wash off after 10 minutes. Wipe thoroughly.
Mix 3 tsp. soda and 3 tsp. sunflower oil. Rub this paste on the affected areas. Clean with a clean cloth. It's soft and effective remedy. Besides thin layer oil forms protective film on the surface.
Washes well with soapy water.

Veneered surface

Veneer is a thin layer of wood that covers the door leaf. It retains the texture of wood and looks natural. Immediately after installation, such furniture must be covered with furniture polish. This will keep her appearance and protect from pollution. But if spots appear, then there are ways to get rid of them.

3 tbsp Dilute dishwashing liquid in half a glass of warm water. Lather with a sponge. Apply the foam to the contaminated surface for 5 minutes. Rinse with clean water and pat dry.
Potatoes help clear stains. Grate the stain with half a potato until it is covered with the released potato juice. Leave until completely dry. Pour talcum powder or baby powder onto a soft cloth and wipe the surface of the door, erasing the remaining starch. Then walk with a clean towel.

After cleaning, polish the entire surface.

Painted surfaces

MDF doors are also covered with enamel. They hold up well to cleaning.

Rub half a lemon on problem areas. Rinse with water after 10 minutes.
Dishwashing liquid and citric acid in a tablespoon, and a teaspoon of water. Dilute the composition in a bowl, apply to spots of fat. After 5 minutes, remove with a clean cloth.
Liquid laundry soap is well suited for such a coating, which is applied to the surface for 5 minutes and then washed off.

To with MDF with any coating, melamine sponges are suitable. Sponge should be lightly moistened with clean water and wipe the stain. It's like an eraser to erase dirt.

Stains and traces of grease spoil the appearance of MDF surfaces. But you can get rid of them in 15 minutes, using the tools that are in every home.

Quite often you have to wash furniture from various stains, what is chipboard afraid of? So, chipboard is, of course, afraid of water in in large numbers. How then to wipe furniture made of chipboard and how to reduce stains?

It is important which chipboard is in front of you - laminated, covered with PVC film, or is it not chipboard at all, but MDF. Laminated chipboard is easier to care for than non-laminated chipboard. Ordinary chipboard cannot be wiped with a wet cloth, use most of detergents. Caring for laminated chipboard is much easier.

Zelenka is easy to clean from chipboard with vinegar.

Felt pen marks can be easily removed with alcohol. Glass liquid, laundry soap

Fighting grease stains on chipboard furniture

A greasy stain from chipboard must be removed as soon as possible.

A fresh greasy stain on chipboard should be immediately wiped with a solution of water and baby soap.

Algorithm for removing a greasy spot from a chipboard surface:

Wipe the stain with a damp cloth
attach to a short time(no more than a minute) apply another napkin soaked in a solution of alcohol, acetone or white spirit, vinegar to the stain,
then b Wipe quickly with a soft dry cloth and whether with cloth.

Grease stains can be removed from furniture chipboard thanks to a melamine sponge, the main thing is not to be zealous and not to rub hard.

A greasy stain from an MDF door or furniture can be removed with a simple laundry soap, and you can also use ammonia and then go through the polish.

How to wash chipboard

To eliminate extraneous odors, chipboard shelves in the closet can be wiped with a barely damp cloth with a weak solution of potassium permanganate, or soap, but after that it must be wiped with a dry cloth.

Copes well with stains on furniture of any origin "Polish 2".

After cleaning, you can treat the furniture made of chipboard with an antistatic agent.

Traces of hot, juice, wine, chocolate, etc.

A hot stain on a chipboard with a film is a folk remedy: vodka mixed with sunflower oil, and then you can rub with a flannel cloth.

If the stain cannot be removed, it can be covered with a laminate pencil.

A stain from juice, wine, chocolate - with a simple damp cloth.

coffee stain- ethyl alcohol or ammonia.

Stains from varnish, cosmetics - lightly applying a sponge with acetone.

Rules for the care of chipboard and MDF

Furniture made of chipboard and MDF is afraid of solvents, gasoline, abrasives and washcloths, bleaches, ammonia, chlorine, steam, mastic, wax.

A napkin or cloth should not be kept on the surface for more than 5 minutes.

Stains are best removed immediately.

Furniture cannot be scraped and rubbed with abrasive products, as well as aggressive solvents, gasoline.

Chipboard cannot be cleaned with soda or soda solution.

Summary table on the types of stains and how to remove them

Spot type	Remove stain from chipboard folk remedy	Professional tool to remove stains
Grease spots	Wet wipes, water with baby soap, alcohol, diluted vinegar, diluted wine vinegar.	Soft degreasing gels, sif-paste. Mr. Chister, Mr. Cleaner, etc.
Blood	2 tbsp salt, 2 tbsp. shampoo or liquid agent for washing dishes and cold water
Zelenka, iodine	melamine sponge, shumanit, salicylic acid.
Felt pen trace, ink	pencil eraser	Profoam 2000
Pencil marks	WD-40	Profoam 2000
Hot spots	Vodka with sunflower oil.
Stain from juice, wine, chocolate	Wet wipe
coffee stain	ethyl alcohol or ammonia
wax stain	Apply ice in the bag, gently scrape off with a non-sharp spatula, Wipe the surface with a soft cloth moistened with a solution of 1 part apple cider vinegar in 10 parts warm water.
Jam	Vinegar soap solution
varnish	nail polish remover
Urine stains	Laundry soap, chlorine
Dye	1 kg lime mortar and 1 kg. chalk diluted with 20% soda solution. With a solution of soda, we dilute the resulting mixture of chalk and lime, adding water and turning it all into a pasty state.
Spots of reagents, street dirt	Potato paste. We peel the potatoes, grate them, add a little water and mix. Dishwashing liquid.	Furniture cleaner - Anti-dust FURNITURE CLEANER
Resin, glue	solvent, for glue-moment - anti-glue, or heat with a hairdryer. For pvc glue- take out to 15 degrees below zero.
Plasticine	Remove dry paper napkin. Then wipe with alcohol.
Pen marks		Profoam 2000
Traces of adhesive tape with chipboard	Shaving foam, dish detergent, white spirit, warm soapy water, vegetable oil, antistatic agent, melamine sponge.	Cleaner Adrilan 5in1, Pronto. Profoam 2000
Fingerprints on chipboard	Melamine sponge, Wet wipes.	Furniture polish. Furniture cleaner-Anti-dust FURNITURE CLEANER
Old dried spots	Apply a mixture of table salt And vegetable oil, wait until dry, gently scrape off or shake off.
egg stain	A mixture of soda and soap, poured hot water apply on the stain.
mold on chipboard	Dry, gently scrape off the mold, treat with an anti-mold agent.

Ways to wash interior and exterior doors.

The front door is the face of the mistress of the house. Very often, the state of the door can be used to judge the well-being of the family. After all, what safer door, the higher the likelihood that there is something to hide behind it. Due to constant use, the gates often get dirty, so you need to know how to clean them.

FROM metal door just enough to wash everything off. Abrasives can be used, but there is a risk of scratches.

Stain removers:

Mister Muscle. The tool must be purchased universal. It is applied with a sprayer and removed with a cloth.
Dishwashing liquid. Just dampen the sponge and apply a little. Rub the door and wash off the foam with a damp cloth.
Silit. The same tool is sold in a spray. Apply to the door and simply wipe it with a cloth.

A wooden door, unlike a metal one, can get wet. In addition, often the coating is not very durable and can be destroyed under the influence of moisture and aggressive substances. That is why dirt is wiped off with a damp cloth. If these are fingerprints, then polish is ideal for removing such contaminants. This polish is Pronto, Weasel, Sana.

In this case, it is best to use glass cleaners. They contain ammonia and alcohol in their composition. This allows you to dissolve grease and remove dirty stains.

Funds overview:

Mister Muscle
Blink

Most often, these doors are made of wood or plastic. In these cases, strong solvents must not be used until the stains are removed. Usually gentle agents are used.

Stain removal methods and products:

Vinegar and soda. It is necessary to dissolve 20 g in 1000 ml of warm water baking soda and 15 g washing powder. Next, 50 ml of vinegar is introduced. A sponge is wetted in the solution and dirt is removed.
Lemon acid. Dissolve in 500 ml of warm water a spoonful of dishwashing detergent and 20 g citric acid. Wash the doors with liquid.
Ammonia. 10 ml of the product must be dissolved in 500 ml of water and the contaminated surface washed with liquid.

Lacquer can be easily damaged. That is why you should not use solvents and abrasive powders to remove stains. All this will ruin the coating. It is better to wipe the door with a polish. Apply a little to the cloth and wipe the surface.

If these are fingerprints, then you can remove them from the plastic with ammonia. A glass cleaner with ammonia is also suitable.

Options:

Domestos
Silit
Dishwashing liquid
baking soda solution

The point is not to wash out the remaining urine, but to dissolve it. Otherwise, the cat will still mark the territory.

Cleaning products:

Lemon. Dilute lemon juice with water in a ratio of 1:1 and wipe the doors with liquid. Before doing this, wash everything with soap.
Vinegar. Wash the stain first with soapy water and then with a 1:1 solution of vinegar.
Iodine. Dissolve 3 drops of iodine in a glass of water and rub the cat's marks with it.

There are several options for washing whitewash. You can use Mr. Proper, which does not leave streaks. But folk methods are cheaper.

An overview of folk methods for removing whitewash:

Vegetable oil. Dissolve 50 liters of vegetable oil in a bucket of warm water and wash the floor with liquid.
Vinegar. Pour 20 ml of vinegar into a bucket of water and wash the floor with liquid.

The primer after drying strongly eats into the surface. That is why you can use not abrasive substances, but solvents. You can apply a fresh primer, and try to wipe off the wet spot with a dry cloth. After that, the surface is washed with water.

Ways to wash the primer:

Ammonia
Glass cleaner
Vinegar solution

This is enough actual question, as dust adheres to the adhesive and dark spots appear.

Ways to remove tape stains:

Vegetable oil. It is necessary to soak the fabric with it and leave it for several hours. After that, the doors are washed with warm water.
Fen. It is necessary to heat the remaining glue with hot air and wipe it with a napkin.
Eraser. Oddly enough, but you can remove the adhesive tape with an ordinary rubber band that wipes the pencil.

It is quite difficult to clean up such pollution. It is necessary to remove the foam as close to the surface as possible with a scraper. Next, apply kerosene or white alcohol to the stain and wipe with a cloth. You can also use the hard side of a sponge.

For removing oil paint solvent must be used. Perfectly copes with pollution vegetable oil, white alcohol or kerosene. Saturate some of these liquids on a cloth and wipe the doors. If it is a water emulsion, then you can remove the remaining paint with a warm soapy water with the addition of ammonia.

No matter how terrible the stains seem, they can almost always be washed off, knowing some tricks.

VIDEO: My doors

Laminated interior doors removing oil stains how to remove grease stains from doors

For any product, in order to increase its service life, it is necessary to properly care for it. And interior doors require special care. Care products for interior doors depend on the material from which they are made. Laminated doors basically have a plywood board or chipboard, a pattern is applied on top, usually on paper basis, and laminated with a special film. The main rule in care is the safety of the upper, laminated layer. But stains can also form on such doors. various origins, which spoil the view and which are best removed.

To remove stains from a laminated door, you will need (and it is best to always have on hand):

Several soft tissues, or a small sponge
Solutions of household solvents (ammonia, acetone)
Alcohol
Vinegar or lemon essence
Laundry soap

Stains on the laminated surface can be removed in the following ways:

First of all, it is necessary to determine the origin of the stain.
Before proceeding with the removal, remove dust from the surface of the door leaf (you can use a damp cloth).
Using a cloth moistened with detergent, mild remedy you can remove stains from juice, wine, chocolate. The napkin is applied for three to five minutes on top of the stain, and then wiped with a soft, dry cloth.
Household solvents remove stains from nail polish, cigarettes, lipstick, marker, felt-tip pens or pencils. A sponge moistened with any solvent (acetone, "white spirit", etc.) is kept on the stain for a short time, and then wiped with a soft, dry cloth.
If coffee stains appear on the surface of the laminated door, they can be removed with alcohol or an ammonia solution. If the coffee stain was not removed immediately, and it has already dried up, then you can prepare a special solution (three teaspoons of baking soda per two hundred grams of water). Gently wipe the stain with a sponge or cloth soaked in the solution, dry with a hair dryer, and wipe with a soft, dry cloth.
The most easily removed stains left by wax or chewing gum. The place of contamination is thoroughly dried and cleaned with a small scraper. The operation to remove such stains must be carried out with extreme care so as not to damage the surface.
If acid stains appear on the surface of the laminated door, they can be removed with a cloth soaked in a solution of vinegar or lemon essence.
How and how to remove grease stains from different types of doors

Similarly, a napkin is applied to the stain, and after three to five minutes it is thoroughly wiped with a soft, dry cloth.
Difficult stains formed by paint or shoe polish can be removed with special means intended for this purpose. These funds can be purchased at any hardware store.

Stain remover for laminated interior doors

When removing stains of any origin from a laminated door, it should be remembered that a damp cloth should not be kept on the surface of the door for more than five minutes, and then immediately wiped with a soft cloth and after one to two minutes wiped with a damp sponge (soaked in plain water). This will avoid possible deformation of the upper laminated surface. But if, nevertheless, the stain cannot be removed, you should not immediately think about replacing the entire door. Currently, there are special pencils for masking stains on a laminated surface. Such a pencil can be purchased at a hardware store and match the color and tone in accordance with the color of the door. You can also seal the stain with a special, color-matched film. It is not recommended to clean stains on a laminated door with abrasive cleaners as this may damage the surface.

How much does it cost to call a measurement and change the glass in an interior door reviews

Instructions on how to care for laminated doors, tips on how to remove stains from laminated doors than to clean grease stains on the door

How to clean interior doors from greasy stains

Returning the doors to their original cleanliness and neatness is not as difficult as it seems at first glance. If greasy spots appear, then it is not necessary to change the canvases. We will figure out how to remove dirt from interior doors.

PVC doors

If a material such as PVC is contaminated, then the following will help to remove greasy stains:

liquid soap;
cleaner for toilet bowls, bathtubs and sinks;
sponges and rags.

Mix equal proportions of liquid soap and sanitary ware.
Apply the solution to the stained area. While carefully rubbing it with a sponge.
Leave to stand for 5-7 minutes.
wash away big amount water.
Wipe dry.

In this way, you can remove all traces of stains without spending a lot of time.

Doors from chipboard

This material is considered the most accessible. Hence, many people have many problems as soon as the first greasy spots become noticeable.

How and how to clean dried stains from doors after repair

It is difficult to wash off the dirt in this case. It is worth remembering that the material cannot be rubbed strongly, since the top layer is paper.

Try this method on an inconspicuous area first. Look at the reaction of the material to alcohol. If everything is fine, then feel free to proceed with the cleansing.

Higher quality laminated sheets can be cleaned with a household solvent such as ammonia or acetone. To do this, you can carry out the following manipulations:

Wet the sponge with the solution.
Apply to stain.
Keep for 3-5 minutes.
We wipe this place with a dry soft cloth.

Remember that when removing stains, you can not keep a damp cloth on the door for a long time. The waiting time should not exceed 5 minutes.

If dirt appears, then acetic or citric acid will help to remove it. coffee and various traces drinks can be cleaned with the following working solution:

3 art. l. baking soda.
200 ml of water.

Prepare the solution and gently wipe the stains with it. Dry thoroughly with a hair dryer.

If there are traces of wax or chewing gum on the doors, then washing them is not difficult. To do this, do the following:

Dry the contaminated area.
Remove wax or chewing gum with a special scraper.

Such manipulations should be carried out carefully so as not to damage decorative coating doors.

Remove paint stains folk methods not worth it. To do this, it is better to purchase professional tools.

MDF doors

If old greasy stains are found on the MDF door leaf, then do not rush to spend your money on expensive substances. Every home has raw potatoes. And then everything is simple:

Cut the vegetable into two halves.
Use the cut side to wipe stained areas.
Wait for the potato juice to dry completely.
Wipe the area with a dry cloth.

If there are small stains on the MDF doors, then prepare talc or powder. Apply the product to the fabric and gently work the fabric.

Fresh grease stains from MDF doors can be washed with a solution that is prepared as follows:

a little dishwashing detergent is poured into the bucket;
some warm water is added;
the product is thoroughly foamed with a sponge.

The solution wipes all greasy stains. Afterwards, we recommend rinsing the door with clean water and wiping it dry.

If the door leaf had a glossy surface, then after washing, treat it with a polish.

Unpainted wooden doors

If contamination is found, then they can be washed off using a special paste, which is prepared according to the following recipe:

The solution is diluted to the consistency of a thick slurry and applied to the stained area. Be sure to let the mixture dry completely. Next, remove it and rinse thoroughly with water.

Lacquered wooden doors

If you notice greasy spots, then a new varnish treatment will help to give the product its original appearance. To do this, you will have to remove the door and remove the old coating. You can do this in three ways:

flush;
heat treatment;
mechanical method.

At home, it is better to use the first method. To do this, you need to take several steps:

The wash, which you need to buy in the store, must be applied to the entire surface of the door. Each stroke should be applied in the same direction.
canvas wrap plastic wrap. We stand for about 4 hours.
Remove the varnish with a spatula or sandpaper.
Rinse the rest of the product with vinegar diluted with water.

After that, you can apply a new layer of varnish.

The considered methods will help remove greasy stains on the doors and give them their former beauty.

How to easily and simply clean MDF doors from greasy stains?

How to remove grease stains from different surfaces?

Each of us had to deal with the need to remove grease stains from fabrics and surfaces.

Cooking is not complete without grease stains on clothes and kitchen surfaces. Children leave greasy marks from their hands everywhere they can reach. The arrival of guests also does not go unnoticed, stains on tablecloths, napkins and furniture will remind you of a fun feast.

Therefore, the problem of removing stains is always relevant. Grease stains are not easy to remove, but, fortunately, enough methods are known. effective fight with them.

On the different surfaces grease stains are removed various methods. But the main motto for removing fatty contaminants is the sooner the better.

How easy it is to remove a greasy stain from doors made of chipboard, MDF and veneer 🚪

Remove excess fat, for example, with a knife. Do not try to wipe the stain, as you will make it even worse - the fat will spread over the surface faster. Blot a fresh stain immediately with a napkin or towel. The stain will not disappear from this, but you will stop its further spread.

1. Grease stains on fabrics

2. Grease stains on tablecloths and napkins made of cotton or linen

Even old stains will disappear if the product is boiled in water with the addition of two tablespoons of washing powder, two tablespoons of bleach powder and two tablespoons of vegetable oil. For boiling, take a stainless or enamelware in which you do not cook food.
If there is potato flour and gasoline in the house, try to remove the stains in this way: make a slurry of flour, dry it over a fire, cool and mix with gasoline. Apply to contaminated area. After a while, clean the product from the mixture and wash the tablecloth.

3. Grease stains on upholstered furniture

If a greasy stain appears on upholstered furniture, in hot pursuit, it can be removed by applying salt and alcohol. Apply salt to the oily stain, rubbing it into the place of contamination for several minutes. The salt will absorb the fat. Then wipe the spot with a cloth soaked in alcohol.
Potato starch applied to a greasy stain is also a good sorbent. Starch is rubbed into the place of contamination, left for fifteen minutes, then removed with a brush or napkin. If all the fat is not absorbed the first time, the procedure is repeated.
Lay a white paper towel over the grease stain and iron with a warm iron. When heated, the fat will transfer from the upholstery to the napkin. Repeat several times.
A greasy fresh stain on leather upholstery is removed with a whipped foam egg white. The protein is thoroughly washed off with water.
An old stain is treated with an aqueous solution of vinegar in the proportion: one part vinegar to four parts water.
Also, a greasy stain on leather upholstery can be treated with a mixture of gasoline and starch in equal proportions, let it dry and wipe off the remaining starch with a dry soft cloth.

4. Grease stains on the carpet

As with removing stains from the surface of fabrics, it is necessary to get rid of residual fat as quickly as possible. Soak the stain with a paper towel until the tissue comes out clean. Then treat the stain with industrial alcohol.
Use absorbent substances to remove fat: starch, soda, talc. Remove the rest of the powder with a vacuum cleaner.
Make a soapy solution by adding two teaspoons of dish soap to a glass of water. Then soak a sponge in this solution and rub the stain until soapy suds form. clean water remove the foam from the carpet. If the stain is not removed immediately, soak it with warm water, take dishwashing detergent and drip several times directly onto the stain, rub the stain with a soft brush. Leave the applied product for a while, but do not let it dry. Then wipe the carpet with a rag or sponge moistened with a solution of vinegar in water and rinse with water.
A somewhat exotic method of removing greasy stains from carpet using shaving cream or shaving foam (not gel). Foam is applied to the stain, left for ten minutes and washed off with water. The whole process can be repeated several times to improve cleaning efficiency.

5. Grease stains on furniture

To one liter of water you need to add two teaspoons of lemon juice and one teaspoon of ammonia. Then moisten a lint-free cloth in the resulting solution and treat the desired area, removing greasy stains. Then polish the surface of the furniture.
Grease stains can be removed from unpolished wooden surfaces with white spirit.

6. Grease stains on the floor

From a parquet floor, a greasy stain can be eliminated using borax (sodium tetraborate). The place sprinkled with brown is covered with a blotter and ironed with a hot iron several times.
To remove a greasy stain from a wooden floor, wipe it with a cotton cloth soaked in gasoline.

7. Grease stain on the wallpaper

If greasy contamination appears on the wallpaper, try to remove it with a roll of brown bread pulp.
Also, the grease stain from the wallpaper is removed with gasoline and blotting paper. Apply a drop of gasoline to the stain, cover with a blotter and iron with a hot iron.

8. Removing grease stains from kitchen surfaces

The kitchen is most prone to grease contamination. Work surfaces, stove and walls eventually become covered with yellow spots of fatty deposits.
Baking soda will help us get rid of them. We use baking soda as a mild abrasive. We make a slurry of soda and water and apply it to the contaminated parts. With the hard side of the sponge, wipe off the fat.
Grease stain will be removed with a solution of water and vinegar (proportion of 4 parts of water to 1 part of vinegar). Leave the solution on the stain for ten to fifteen minutes. Rinse well with clean water.
Wooden kitchen furniture can be removed from grease stains by carefully treating the contaminated areas with a mixture of vegetable oil and soda (mix two tablespoons of soda with one tablespoon of oil). You need to rub with a soft brush so as not to scratch the furniture. Then remove the mixture with water and wipe the furniture dry.
A universal mixture will help to wash any kitchen surface, for its preparation we take a glass of water, add half a glass of vinegar and half a glass of vodka or diluted alcohol, add ten drops of eucalyptus, orange or other essential oil. Pour into the sprayer, shake the mixture well before work and spray it on the surface, wait ten to fifteen minutes and remove the corroded fat with a sponge.

REMEMBER!!!

When working with solvents such as gasoline, kerosene, white spirit, avoid contact with fire and ventilate the area well.
We told you only about folk methods of dealing with greasy stains. To date chemical industry offers a diverse arsenal of stain removers, including various greases.
If you choose to use these stain removers, ALWAYS read the instructions carefully and test the stain remover on an inconspicuous area or fabric.

If you daily wipe the kitchen furniture with a soft cloth or sponge moistened with warm water, and then wipe it dry, the grease is easily removed. Multi-day fatty plaque in this way will not be removed.

Can be used special means designed for cleaning plastic coatings and wooden surfaces from fat: liquids, sprays and gels Frosch, Faberlic House, L.O.C. ™ (Amway) and others. But they are all quite expensive, and if you decide to use them, do not forget to check the effect of the drug on small area furniture in the least visible place.

Wash off fat kitchen set from wood, using folk methods, the effectiveness of which has been tested by many generations. Components for such tools can be found in every home. Here are some recipes:

The best known fat remover kitchen furniture- a mixture of baking soda and any vegetable oil in a 1: 1 ratio. The resulting slurry is applied to contaminated places and left for half an hour. Oily coating dissolves in oil, and soda binds a mixture of fats. The resulting lumps are easily removed with a damp sponge. Rubbing contaminated areas should not be, if the grease spots are not completely removed, repeat the procedure.
Ordinary laundry soap works on a similar principle. Soap shavings are dissolved in a small amount of water, the surface of the furniture is abundantly moistened with the resulting "jelly" and left for 20 - 30 minutes. The soap molecules act as a "lever" to pull the grease off the surface of the plastic or wood and keep it in suspension, making it easy to remove with a wet cloth or sponge.
A weak solution of ammonia is well laundered from kitchen furniture - you need to take a tablespoon of ammonia for 1 liter of water.
How to clean chipboard from stains

Contaminated surfaces are treated with this solution, and after a few minutes they are wiped with a damp and then dry cloth. True, after such a procedure, an ammonia smell will remain in the kitchen, but it will quickly disappear.
As a means for cleaning grease from wooden surfaces, you can use a dough baking powder - it contains ammonium carbonate and soda. The baking powder is moistened with water and applied to the spots of fat. After 15 minutes, the gruel is removed with a damp sponge and carefully wiped with a dry cloth. Relatively fresh traces of grease are easy to remove if you apply a layer of talc or baby powder (it includes talc and starch) on the stains, and then after 10-15 minutes remove the remnants of the product with a wet cloth and wipe dry.

General, periodic or unscheduled cleaning is part of our everyday life, and there is no getting away from it. Most of the measures provided for in such cases are carried out according to long-established, traditional technologies. However, not everyone knows how to effectively remove greasy stains from laminated doors. In fact, if you look in detail, all the methods implemented at home are quite simple.

When starting to remove stains, it should be borne in mind that doors made of PVC, chipboard or plywood are more “gentle” in terms of care. As a rule, they are the ones subjected to lamination, and this protective and decorative layer is easily damaged by an abrasive, especially if it is a paper-based film. Therefore, when washing such interior doors, utmost attention and accuracy are required.

What to cook:

Sponge or soft wipes. One will not be enough to remove greasy stains.
Warm water.
Cleansers - soda, alcohol, essence (lemon or vinegar), household solvents, laundry soap. They are used depending on the origin of stains, including fatty ones. After all, the latter may not be the only ones on the canvas, box, platbands. Therefore, when deciding how to wash wooden doors (plastic or otherwise), this must be taken into account; it is unlikely that anyone will be satisfied with the prospect of putting them in order in several “visits”.

Operating procedure

Determining the nature and degree of pollution

The door may not necessarily be stained with drops of grease. Traces on it, dirty spots appear even with repeated touching with seemingly clean hands. But the secretions of the sweat glands still remain. As a rule, in the place where the handle is located. Gradually, dust adheres to this area, and the lamination begins to darken. Such a preliminary examination will allow you to determine exactly what and how to wash greasy stains from doors covered with laminate.

Solution preparation

Depending on the degree of contamination, one of the following options is selected:

soapy;
acetic (10%);
lemon essence (same concentration).

Surface preparation

To simplify the process of removing fat, the base must be rid of adhering dust and dirt. How to wash the door, the hostess decides for herself, focusing on the material of the canvas and the type of lamination. As a rule, the same soapy solution is sufficient. But here you need to know the sense of proportion. It's one thing if the canvas is made of plastic - in relation to the liquid (if it is not aggressive) given material inert. But if you have to wash wooden door, care should be taken; the canvas is immediately "dry", that is, wiped dry with a soft cloth.

In some cases, before washing the sash or casing, you have to get rid of adhering lumps of dirt, which is often found on input structures. When deciding how to clean the door in this place, you should also consider the type of lamination. If on wooden canvas glued decorative paper, closed at the top the thinnest film, then no scrapers, knives, etc. can be used - such coated ones are easily damaged. It is worth first softening the dirt by moistening it with a wet cloth, and then wash this place clean with soapy water or soda solution(200 ml / 3 tsp).

Fat removal

To do this, you need a weakly concentrated solution (1 to 10) of citric acid or vinegar. Alternatively, alcohol. The agent is gently applied with a damp cloth to the stain. The recommended exposure is about 2.5 - 3 minutes (with an average degree of contamination).
Rinse off the solution together with the fat fragments with clean warm water.
Wiping the door with a dry cloth.

It is not recommended to keep the solution for more than 5 minutes. Any of the drugs used is aggressive to some extent, and may, with prolonged contact with protective layer damage him. The same fully applies to the question of how to care for the doors with lamination. In this regard, they are much “softer” than metal or glass counterparts.
When caring for wooden doors, removing various stains from them, it is advisable to dry the treated area with a hairdryer. This is more reliable and faster than wiping the surface with a cloth.

If you choose the right method for removing grease stains, then no traces will remain on the laminated door. It is advisable to clarify this issue when buying it. Managers furniture stores well oriented in this, and be sure to give some sensible advice.

home > Abrasives