Warehouses are designed to store various materials and goods. Often, for the storage of certain groups of goods, special conditions are required, including a certain temperature, humidity, and in general a microclimate. To create these conditions, the room must be isolated as much as possible from the effects of conditions. external environment, that is, for sealing and thermal insulationIn cold climates, the facades of houses are not able to retain heat inside the premises by themselves. As a result, high heating costs, the low efficiency of which is due to high thermal conductivity. building materials.

POLYURETHANE FOAM IS THE BEST SOLUTION FOR WAREHOUSES

To date, for the thermal insulation of rooms of any type, a lot of modern heaters are used, which are designed to solve various problems. However, for the insulation of warehouses, polyurethane foam, or polyurethane foam, is best suited. This heat insulator has unique characteristics, yet unattainable for other materials. In particular, polyurethane foam has the lowest coefficient of thermal conductivity, which makes it possible to recoup investments in thermal insulation in just two seasons, and subsequently save up to 50% on energy resources for a long time to come.

find out the cost of thermal insulation of your room

We will call you back at a convenient time for you

PROPERTIES OF POLYURETHANE FOAM SO NECESSARY FOR WAREHOUSE INSULATION

The only disadvantage of PPU can be called susceptibility to ultraviolet rays. However, this problem is solved by simply painting the thermal insulation with any paint that will protect the surface.

Naturally, it is impossible to create the necessary microclimate in the warehouse only by thermal insulation of the premises. Therefore, in combination with a heater, it is necessary to take care of high-quality, well-thought-out ventilation. Such a complex will help make your warehouse an ideal place to store any goods.

Any warehouse is characterized by a huge space. Therefore, it is very difficult to heat it - to create comfortable temperature. After all, people work in this room, materials are stored and mechanisms work, for example, scissor lift tables. If this problem is solved only at the expense of powerful heat sources, then the bills for consumed electricity will be huge. That is why such a room must be properly insulated. It is necessary to eliminate all "cold bridges", seal the gaps and, if possible, keep the gate open for a short time.

Warehouse insulation

A room of this type is not insulated at all like ordinary housing. Here you need to take into account the huge space and work at height. In addition, the company does not always have the opportunity to stop the work of the warehouse for insulation. As a rule, such work is carried out at night or during the performance of basic functions. To insulate the warehouse, you can use the following materials:

1. Mineral wool is a cheap and popular insulation. This material is non-flammable and does not rot. But cotton can absorb moisture. The basis for such a material must have high strength.
2. Polyurethane foam is a sprayable material. Not combustible, is a good vapor barrier, has a low thermal conductivity. Easy to apply, no seams. There are no cold bridges. This material is expensive. It is impossible to carry out work on insulation without stopping the warehouse.
3. Sandwich panels are a durable material that does not require processing. Minus: high weight, difficult installation, heavy load on the walls.
4. Styrofoam is a cheap, lightweight insulation. Easy to mount.

It is very important to properly insulate the gate. For this, the following materials are used:

1. Sheet expanded polystyrene.
2. Mineral wool slabs.

Door insulation with polystyrene foam

To do this, use a dense foam with a thickness of 50 mm, self-tapping screws and a beam of 50x50 mm. First you need to treat the timber with a remedy for fungus and mold. After the timber has dried, a crate is mounted from it on the inside of the gate. Since the width of the foam sheet is 50 cm, then vertical bars fixed in increments of 49.5 cm. If this size is not respected, then additional fastening will have to be arranged. Gaps that may appear after the completion of these works must be filled construction foam. After that, this insulation must be covered with any sheet material (plywood, tin).

Door insulation with mineral wool

Metal gates from the inside need to be cleaned. Next, holes are drilled and a crate is mounted from a bar (step 100 cm) using self-tapping screws. Insulation plates must be cut in such a way that their width is 3 cm more than the pitch of the bars. Mineral wool slabs are placed in the resulting cells from a bar (with the help of glue). Sheet material is fixed on top of the insulation, which is not afraid of moisture.

How to reduce heat loss when opening the gate

One of the ways to retain heat at the moment of opening the gate is the device of an intermediate vestibule. However, this method is not entirely convenient, because the process of moving goods becomes more complicated. Also, the bath problem can be solved with a heat gun. In this case, a sensor is installed on the gate. As soon as the gate is opened, the heater immediately turns on, which works until the gate closes (and for some time).

If you are in business, then it is not for us to tell you how important reliability is. storage facilities. Just imagine that frost hit and all your goods suffered from it. Such situations need to be considered in advance. This will avoid losses.

Insulation of warehouses will help to save marketable condition your products all year round. This procedure also allows you to save money, since after thermal insulation you will be able to heat your warehouse not as intensively as before. After all, insulated walls retain heat inside the room.

What material should be chosen for thermal insulation of a warehouse?

If you decide to insulate your warehouse, then it is best to choose polyurethane foam for this purpose. It has a lot of advantages:

Ease of installation. Insulation work with this material take no more than 1 day. Agree that such terms are quite attractive;

Saving. In addition to the fact that your goods will always be safe, you can save on heating. Insulation of warehouses with polyurethane foam reduces energy costs by 50%. A one-time investment in thermal insulation will help you save money for years to come;

Durability. Polyurethane foam as a heater can last for several decades.

Why insulate a warehouse with our help?

You have decided to insulate your own storage facilities, but do not know who to entrust this work to? Contact MasterPena.

For more than 7 years we have been providing services for the insulation of objects using polyurethane foam. Our specialists have rich experience in this field and use modern equipment.

The MasterPena company takes on objects of any complexity. And the result of its work and the materials used gives a guarantee of up to 50 years. We use only certified polyurethane foam.

All work is carried out as soon as possible - up to 1 day. At the same time, the cost of our work is very affordable. In fact, you only need to pay for the material itself. Its delivery, installation and calculation of the cost of all work are carried out absolutely free of charge.

Effective insulation of hangars, warehouses and vegetable stores. Operational measures and longevity of the result The success of an enterprise, the economic well-being of individual companies, cities or even countries depends not only on the level of development of production, but also on how long they can store their products. On a simple small example it becomes obvious. It makes no sense to stock up for the winter a large number of vegetables and preserves, if it is impossible to provide them right conditions for storage. They will just spoil.

Therefore, a combination of factors such as temperature and humidity, the presence or absence of sunlight, inflow fresh air, as well as many other nuances directly affect the shelf life of raw materials or products, regardless of their types. Hangars, warehouses, vegetable stores must fully meet certain requirements dictated by the types of products stored in them. It is very important to maintain on the territory of the hangar, warehouse or vegetable store constant conditions in any season. And not everyone can achieve this.

Only proper insulation and thoughtful design can positively affect the operation of the facility.

Only proper insulation and thoughtful design can positively affect the operation of the facility. With minimal energy consumption, the owner of a warehouse or hangar has the opportunity to maintain optimal conditions for the storage of a particular raw material or product for a long time. But how to insulate such a large structure without missing anything and without miscalculating the materials? The answer is simple - entrust this business to professionals.

Varieties of warehouses, hangars and vegetable stores. Their design features and the resulting requirements for heaters

To begin with, it will be correct to consider the most commonly used types of hangars, warehouses and vegetable stores. This will allow you to better understand what kind of insulation materials you need to use.

Hangars

This type of object is often used to store various kinds machinery and equipment. It can be agricultural machines, aviation equipment and much more. Hangar features include:

Hangars are often used to store various types of machinery and equipment. It can be agricultural machines, aviation equipment and much more.

• Differ in large scale - the height, width and length of the hangar should allow to accommodate large equipment
• The use of vaulted roofs - for hangars, this optimal design. In fact, this avoids the need to build walls, but when building large hangars for certain types of equipment, walls can also be raised, on which a vaulted roof is mounted.
• The use of thin sheet materials - thin sheet steel is often used for construction, which is sheathed with a metal frame. This allows you to reduce costs when building such large objects.

Old hangars can be sheathed with wood. But today it a rarity. Design features of this type of objects themselves dictate the requirements that the insulation must meet:

• It should be easy to fix on metal thin surfaces
• It must tolerate dynamic thermal deformations of the base well, since the metal is very sensitive to temperature changes
• Should be highly efficient - in fact, it will not only insulate, but make up 95% of the thickness of the entire wall, so it should be as efficient as possible
• Have a small mass - the vaulted roofs of such hangars are designed for certain loads, so they cannot be overloaded. And given the scale of the structure, the use of heavy heaters is simply unacceptable

Warehouses

This concept is very broad, since a warehouse can be built from almost any building materials, its configuration can be anything, and it itself can be only a small part of a large real estate complex. At the same time, almost any goods, raw materials or equipment can be stored in warehouses. Thus, no less requirements will be imposed on the insulation. In addition to what has already been announced for hangars, we can mention:

Warehouses can store almost any goods, raw materials or equipment. For this reason, more lenient requirements are imposed on insulation.

• Resistance to moisture and chemicals - the warehouse area can be periodically sanitized using water and chemical substances, so the material should not be vulnerable to them
• Possibility of application on almost any surface - the warehouse can be built of metal, stone, concrete, wood or combinations thereof. The material must adhere perfectly to any substrate.
• For maximum efficiency in minimum flow usable volume of the premises - if the insulation layer is too large, and an additional frame is required for its fastening, then its use will be impractical, as this will go to the minus of the useful internal volume of the warehouse
• Be affordable - a lot of insulation may be required - it all depends on the scale of the warehouse. Therefore, the price of the material must be not only acceptable, but also fully justified, economically justified

Vegetable storage

These are specialized warehouses or hangars designed specifically for storage fresh vegetables or fruit. Here, the temperature regime and the level of humidity are of particular importance. Often they are built of stone or concrete, equipped with systems forced ventilation and refrigeration units. In this case, it is very important to properly insulate the vegetable store in order to reduce energy consumption to ensure its operation. As we are talking about storage food products, one of the main requirements for insulation is environmental friendliness and chemical neutrality. Under no circumstances temperature conditions and influences, the thermal insulation material must not emit toxic substances. In addition, the range of its operating temperatures should be wide enough.

General requirements for insulation for warehouses, hangars and vegetable stores

In addition to those already listed above, there are also some General requirements to thermal insulation materials, regardless of where they will be used:

A number of requirements are presented to thermal insulation materials, the observance of which is simply mandatory when choosing them.

• Fire safety - materials should not adversely affect the level fire safety, and ideally they should protect load-bearing structures from the effects of fire in cases of local fires
• Longevity - carrying out regular overhauls warehouse is impractical. Therefore, the material must be characterized by the highest durability.

It is now clear that the market thermal insulation materials very hard to find one golden mean which is being discussed. Of course oh self-insulation a whole hangar is out of the question - this task is too large-scale, requiring professionalism and rich experience, appropriate production resources. Therefore, we will consider what companies can offer today, and what is already a thing of the past.

Thermal insulation materials of the past century

It cannot be said that today they are not used anywhere. These materials are still used today by contractors seeking maximum savings and benefits for themselves during the construction of private and apartment buildings, as well as for the insulation of some industrial and commercial facilities.

Styrofoam

This material is familiar to everyone. Today it is still used for outdoor insulation in some countries. However, its use is associated with a number of difficulties and dangers. The negative points include the following:

Today, foam is still used for outdoor insulation in some countries. However, its use is associated with a number of difficulties and dangers.

• High degree of flammability - foam plastic blazes like high-octane fuel. At the same time, it releases toxic volatile compounds into the air - a pure poison. Extremely dangerous to human life and health
• He likes only flat planes - he is rather fragile. This is a sheet material that can only be used on flat walls. The lack of flexibility makes it impossible or extremely difficult to insulate irregularly shaped structures
• Installation is detrimental to the base - requires the use of anchors. You can not fix it everywhere. Violating the integrity of the foundation, specialists reduce the operational life of the entire structure
• Short-lived - average service life is only 15-20 years

With all the desire to save money, it will not work, and far from everything can be insulated with them. And the presence of joints significantly reduces its effectiveness. Moreover, there is no need to talk about environmental cleanliness either. Requires careful protective finishing. So, we immediately cross it off our list of applicants.

Wizard Tips: When backfilling the soil in 90% of cases, the foam, as well as the waterproofing coating, which is most often ordinary polyethylene, are damaged. So the level rise ground water leads to wetting of the wall, as well as to the loss of the effectiveness of the insulation.

Mineral wool

Compared to foam, more safe material, since it, at least, does not support combustion. However, when exposed to fire or even high temperatures, it releases volatile formaldehydes, which does not make it completely safe. Installation is also associated with a number of difficulties, since the material requires the use of additional fasteners. But this is not main disadvantage this material:

Compared to foam mineral wool a safer material, since at least it does not support combustion.

• Afraid of moisture - when wet, loses up to 80% of its nominal efficiency
• Is heavy and dense sheet material- this indicates not only the impossibility of using the vaulted roofs of hangars for insulation, but also the presence of seams, which are the weak point of any insulation
• Average durability - service life does not exceed 25 years

Even with a stretch, this material also cannot be called the best insulation. But many companies offer these materials for the insulation of warehouses, hangars and vegetable stores. And we strongly recommend that you avoid such "bear" services. After all, there is modern material, which is much more efficient. Why not insulate with mineral wool? The answer can be found in the video:

Foamed polyurethane "Ecothermix" - maximum efficiency and economic feasibility

The company "Ecotermix" offers the most effective solution to the problem of insulating warehouses, hangars and vegetable stores with the help of foamed polyurethane. This is a unique material, which is based on natural components obtained in the process of agricultural activity. Unique is not only the composition of polyurethane, due to which it has the highest performance properties, but also the method of its application. But first things first. Consider the key performance benefits of polyurethane foam:

The company "Ecotermix" offers the most effective solution to the problem of insulating warehouses, hangars and vegetable stores with the help of foamed polyurethane.

• The highest degree of efficiency - foamed polyurethane consists of 90% microscopic air bubbles, which, as you know, are characterized by minimal thermal conductivity. Accordingly, the material itself most effectively allows you to maintain an optimal microclimate inside hangars, warehouses or vegetable stores.
• Ease - the weight of the material does not exceed 11 kilograms per one cubic meter. For comparison, the same volume of mineral wool will weigh from 60 to 100 kilograms. Therefore, foamed polyurethane from Ecotermix can also be used to insulate light vaulted roofs of hangars.
• Chemical neutrality and chemical resistance - the only thing that can somehow spoil this insulation is industrial solvents of some brands. Household chemicals not dangerous to him. And the material itself is absolutely chemically neutral, that is, harmless to people and food.
• Ecological cleanliness - this allows you to use the material for the insulation of warehouses and vegetable stores with food products without any fear
• Strength and elasticity – special kind polyurea bonds, which form the basis of the material, gives it strength and elasticity. Due to this, the material perfectly copes with thermal deformations of the base and moderate mechanical stress.
• Polyurethane is not afraid of moisture - polyurea, which is based on the same components and elements, is used for waterproofing, which is unsurpassed today. Therefore, polyurethane foam is also invulnerable to moisture, and its absorption coefficient is a maximum of 1.5% of the total volume.
• The material is fire resistant - polyurethane foam "Ecotermix" not only does not burn, but is also able to withstand fire, protecting load-bearing structures from its harmful effects. This allows you to significantly improve the level of fire safety.
• Durability – The service life of polyurethane foam is at least 50 years. There is no such insulation that would last longer
• Protective effect – the material protects the substrate from corrosive influences and pests such as woodworms or mold

Now let's get acquainted with the technology of applying this insulation. For this, the masters of the Ecotermix company use a special unit that mixes two liquid components of polyurethane in a strict proportion, and then feeds them into the sprayer under high pressure. That is, polyurethane is applied to the base by spraying, similar to conventional surface painting. But the difference is that already a few seconds after spraying, the reaction between the components of polyurethane and air begins. It foams, saturated with microscopic air bubbles, increasing in volume up to 70-100 times!

For spraying polyurethane foam, the masters of Ecotermix use a special unit that mixes two liquid polyurethane components in a strict proportion, and then feeds them to the sprayer under high pressure.

This method of application makes it possible to cover surfaces of any shape, fill any niches, joints, even in the most inaccessible places of the structure. But that's not all. The insulation has the highest degree of adhesion, so it can be applied to any base: wood, metal, stone, concrete. At the same time, the foundation does not require serious pre-training. It just has to be clean. The advantages of this application method include:

• Full tightness - the coating is seamless, which means that it simply has no weak points
• Time saving – insulation of even large industrial facilities takes a minimum of time, which allows you to quickly put them into operation
• Maintaining the integrity of the base - this allows you to maintain the nominal operational life of the building, and sometimes even extend it

There are simply no analogues to foamed polyurethane in terms of properties and installation method today, and any alternative is much less effective. Therefore, PPU is successfully used for thermal insulation of real estate objects, namely:, and other structures. It is wonderful , and equipment . Let us consider in detail how the insulation of hangars, warehouses and vegetable stores takes place.

Insulation of hangars with foamed polyurethane

Often hangars are built on metal frames using sheet steel. Polyurethane is applied directly to it, which allows you to get something like a sandwich panel as a result. The insulation is applied in an even layer with inside, after which it can simply be covered protective layer polyurea, and be used in this form. If desired, it can be sheathed with any finishing material. Often, a layer of about 10 centimeters is enough to insulate the hangar. This allows you to maintain an optimal microclimate inside for the maintenance of equipment, transport, food.

Polyurethane is applied directly to it, which allows you to get something like a sandwich panel as a result.

It is important that when hardening, polyurethane produces an additional strengthening effect, increases the level of sound insulation, and dampens vibrations. This makes staying inside more comfortable and also prolongs the operational life of the hangar. All load-bearing structures are covered with this material, which protects them from any external influences. Insulation with polyurethane foam occurs in a short time. We recommend watching a video where the hangar was insulated in 3 days:

Warehouse insulation with polyurethane foam

Warehouses built of stone or concrete can be insulated both inside and out. External insulation is considered more effective, as it prevents the wall from freezing in the cold winter season. Polyurethane foam is applied directly to the wall itself, and then covered with a layer of plaster mixture on top and painted. To achieve maximum efficiency, complex insulation can be carried out by covering the walls with an additional layer of polyurethane foam from the inside.

Polyurethane foam is applied directly to the wall itself, and then covered with a layer of plaster mixture on top and painted.

With external insulation, polyurethane foam takes on all the blows of the elements, coping well with them. So the walls of the warehouse will last longer, as they will not be subject to temperature changes and other negative impacts. Porous and loose surfaces are pre-coated with waterproofing (polyurea) and primer. Warehouse insulation allows you to significantly reduce the cost of heating or air conditioning. No dampness or mold will occur, which is especially important when storing non-moisture resistant products.

IMPORTANT: PPU is a non-combustible and environmentally friendly insulation, so you can not worry about normative documents. The material is safe for people, and also does not have any effect on the goods or raw materials in the warehouse. Therefore, this will be the best option for you.

Insulation of vegetable stores with polyurethane foam

Foamed polyurethane (PPU) is ideal for warming vegetable stores. Its environmental friendliness and chemical neutrality allows you to keep products in the form in which they were placed in storage. It is here, where refrigeration units or complex air conditioning systems are most often used to maintain an optimal microclimate, polyurethane foam is especially needed.

Foamed polyurethane (PPU) is ideal for warming vegetable stores.

Energy costs can be halved, as the microclimate will be maintained much easier. Both external and complex insulation of vegetable stores is acceptable. It is very important that polyurethane foam is excellent for thermal insulation of communications, such as ventilation ducts, for example. It perfectly fixes them, absorbing vibrations and making the system quieter.

When should work on the insulation of a warehouse, vegetable store or hangar be carried out?

Of course, the insulation of such facilities must be carried out even before they are put into operation at the construction stage. However, the company "Ecotermix" provides services for the insulation of already used objects. With external insulation, there is no need even to suspend the operation of a warehouse, hangar or vegetable store. Thermal imaging survey allows you to identify the most weak spots buildings, and therefore, to focus on them.

IMPORTANT: The optimal conditions for external insulation with foamed polyurethane will be calm, dry weather with an air temperature of +10 to +30 degrees Celsius. After complete solidification, which will take only a few hours, the operating temperature range of the material will be from -90 to +100 degrees Celsius. Internal insulation can be made at any time of the year, regardless of external conditions.

The company "Ecotermix" provides constant information support to its customers and partners. You can contact the specialists of the consulting department using the " contact information". Competent employees of the company will kindly answer all additional questions, provide detailed technical information, will tell you about the most advantageous offers and discounts. And we continue to answer the questions of our readers, who happened to face certain problems in the process of insulation. Now we are considering issues related to the insulation of warehouses, hangars and vegetable stores.

Questions from our readers

Stepan M., city of Kaluga : "Hello. Faced a serious problem, losing most of the crops in the past year. The construction of the vegetable store started two years ago. The total capacity is 1500 tons. We store mainly onions. Insulation was provided to maintain the required temperature indicators. Our storage facility is semi-basement. The upper - above-ground level, was insulated from the outside with mineral wool, and the lower level was insulated from the outside with foam. As a result, the entire lower level throughout the winter was covered from the inside with moisture - condensate. As a result, the vegetable simply rotted in the storage throughout the winter, as the ventilation could not cope with such humidity. Now we can’t get rid of the fungus and mold, which covered all the corners. The new season is on the nose, so we want to quickly solve the problem. What could be the result of this dampness? Maybe we chose too thin foam? But on the advice of experts, we took best option. How can we be? Thanks"

Hello Stepan. In some cases, the appearance of condensation on the walls after insulation can indeed be a sign of the low efficiency of the material. But this is far from the only problem that can be the cause of your troubles. Firstly, when installing the foam, you probably used plastic anchors for secure fastening. In doing so, you drilled the base. Often it is these holes that become weak points during operation. If your region has elevated level groundwater, then this condensate may be the result of a banal wetting of the wall. In any case, there is only one way out - it is necessary to dig out the underground part of the repository again. It is necessary to remove the foam and make insulation with foamed polyurethane, followed by the application of a waterproofing coating - polyurea. Outside, such a coating can be plastered over a reinforcing mesh. After that, you can safely backfill and be confident in the effectiveness of insulation. Additionally, we recommend warming upper part storage with foamed polyurethane from the inside. This will guarantee that the temperature will be even, even if the mineral wool insulation was not done professionally.

Vitaly G., city of Petrozavodsk : "Greetings. Finally, he fulfilled his old dream - he bought a small six-seater plane. I will use it for private purposes. A small hangar is currently under construction. He did not become sophisticated - he leaned towards the use of a typical steel structure with metal lining. I want to make the hangar heated so that maintenance can be done right there at any time of the year. I also plan to keep a car and two tractors there, so there will be enough work with them, both in spring and in autumn. What is better to use for insulation? Heard about some Ecowool - what is it? They say expensive, but effective. What do your experts recommend? Thanks to"

Hello Vitaly. Great question! Indeed, today on the market there is such a heater as Ecowool. The newfangled prefix "Eco" often speaks of the environmental friendliness of the product, but not in this case. The manufacturer is guided only by the fact that Ecowool is based on cellulose. But to give it the properties that it possesses, a number of chemical binders are used.

Wizard Tips: What is Ecowool? This is a heater that is applied by spraying, like foamed polyurethane. But in the case of Ecowool, the process takes much longer, and even the most hard-to-reach places often fails to cover evenly. Does not possess Ecowool and high operational characteristics. She is afraid of moisture, reacts poorly to thermal deformations of the base, is not able to withstand fire, and often even supports it.

As you very correctly noted, Ecowool is very expensive. And the worst thing is that it does not justify its price. Foamed polyurethane "Ecotermix" fully pays off several times over a long service life, which exceeds 50 years. Do not forget that Ecowool will not be the best base for many finishing materials. But you can cover the frozen polyurethane foam with almost any finishing material. Obviously, the choice should be made in favor of foamed polyurethane. In addition, it will have an anti-corrosion effect, increase the level of sound insulation, the degree of fire safety and the strength of the entire structure. And, of course, this insulation will allow you to minimal cost maintain an optimal microclimate inside your hangar.

Olga M., St. Petersburg : "Hello. We have such a problem. The warehouse is located in the same building with the production complex - one common wall as well as semi-trailer parking. The latter is not insulated in any way, so it is very cold in the warehouse. Partitions made of ordinary profiled steel sheet. Of course, it is impossible to talk about the efficiency of warehouse activities. It is simply impossible to be in the warehouse, since the temperature in it is almost the same as in the street. What can we do in this situation to ensure the normal operation of the warehouse? We were offered mineral wool, but in those conditions it would be a waste of money. I don’t want to build additional partitions either.”

Hello Olga. Indeed, mineral wool, as well as bulk insulation, will be completely useless in such a situation. We offer you foamed polyurethane "Ecothermix", which will provide complete tightness, will allow you to close all the cracks and joints. This insulation is applied by spraying, after which it increases in volume by almost 100 times. Thanks to this, all joints between individual sheets of corrugated board are completely sealed. The material is applied directly to the metal, perfectly fixing on it. If desired, you can make subsequent finishing with any materials.

Summing up

For the insulation of any warehouse, vegetable store or hangar, you will not find a better material than foamed polyurethane, which in all respects bypasses any alternative solutions. If you value money and time, and are also focused on achieving an impeccable result, then Ecothermix specialists are at your service. These are not only the best prices, but also guarantees of the quality of the result. And this is a pledge successful management business in any area.

Convince yourself of the environmental friendliness and reliability of Ecothermix polyurethane foam by watching the video below: