Which SIM card is inserted into the iPhone 5. What SIM card is needed for the iPhone? Getting started with the iPhone

Is it difficult to deal with the iPhone?

From the point of view of the complexity of its device, the iPhone may well claim the title of one of the most accessible and intuitive devices - even a child can figure it out. However, when working with it, many people have the same question: how to insert into the iPhone? To cope with this seemingly difficult task at first glance, you need to carefully study the scope of delivery of this device.

To insert a SIM card into the iPhone, you need a special paper clip

In simple mobile, the SIM is inserted into the iPhone using a special paper clip, which can be found in its box. Outwardly, it resembles the most ordinary paper clip and is made of a special flexible wire. Before inserting a SIM card into the iPhone, it must be turned off. This can be done by pressing the on / off button of the device and holding it for 3-4 seconds. Immediately after that, Slide to power off will appear on the iPhone screen. Just swipe your index finger over it and it will immediately turn off. Now you can insert a SIM card into it.

Inserting a SIM card into an iPhone is easy

Then take out the special paper clip from the box. Insert one end of it into the hole for the SIM card slot and press it a little. Remember that you need to press lightly and very carefully, otherwise you may damage the iPhone. Once pressed, the slot should pop out automatically.

Then take the SIM card and carefully insert it into the slot. Slide it back in and turn on your iPhone. This completes the whole procedure.

What do you do if you have an iPhone and a heavily built stranger asks you for your phone so they can insert their SIM card and make a call? Can't you refuse them, because calling your mother is sacred? Or are you changing your mobile operator? Or are you just selling your Apple device and you need to get your SIM card? It would seem an elementary operation, however, difficulties can arise with it.

How to insert or remove a SIM card on various models of iPhone, iPad

It is worth mentioning right away that SIM cards are inserted into the iPhone using a special small container. It is securely fixed in the case along with the operator's communication chip. This “box” for a SIM card is usually located on the side panel of the device, it can be located at the top and bottom. Only a few Apple devices (iPhone 3GS, iPhone 3G) had a SIM card slot built into the top of the phone.

The appearance of the container is practically unchanged. It is a compartment with a hole for a special key.

On the right side we find the SIM card slot with a keyhole

So, the key must be inserted into the hole and slightly pressed. You need to apply force carefully, since the Apple device is crammed with circuit boards and chips from top to bottom. And they are very easily damaged from any scratch.

The key with which we pull out the SIM card slot

Most likely, the container will give in almost immediately and "jump out" as soon as you use a special spring.

Using the key, we take out the container with the SIM card

The question immediately arises: where to get the key? Often, phone manufacturers, and Apple is no exception, put SIM card slot openers in the box with the device and fix it so as not to scratch the device during transportation.

In the box with the device we find the key

But if you didn’t find such a gift in the box, don’t despair. To open the slot, you can use any item that has similar physical and geometric characteristics. The most popular choice for opening the SIM slot is an ordinary paper clip.

Paper clips to open and pull out the SIM card tray

A special key, like a paper clip, can be replaced with anything. For example, a needle (use only a blunt end), a toothpick, a piece of hard wire, etc.

And the operation can be successfully carried out without a special key.

Do not use brute force, push too hard and try to pry the container with a knife. Most likely, this will lead to disastrous consequences and spoil the integrity of the case.

Video: how to remove the SIM card tray from iPhone

How to remove the SIM card from the iPhone if it is stuck inside

Unfortunately, cases of stuck sims in iPhones are not uncommon. This is especially true for the so-called cropped and self-cut 3FF and 4FF SIM cards.

SIM cards of 2FFm 3FF and 4FF formats, which are used in the operation of smartphones

In the event that the SIM card is stuck, you must try to put it back into the tray, and then repeat the operation with pulling out the slot:

shake your phone: perhaps the SIM card will fall into place immediately;
try a couple of times to open and close the SIM container;
find a small piece of thick plastic wrap or very thin plastic. Use scissors to cut it into a strip, slightly narrower than the SIM slot. Try, by slipping this “tool” into the slot between the container and the phone, put the SIM card back into place in the tray. When you feel the card has clicked into place, carefully try to open the container again.

Video: how to remove the SIM card if the container is stuck

If the SIM card container does not move at all

If the SIM card slot does not respond at all to your attempts to open it, you will not be able to avoid contacting a service center. A similar problem can only be solved by completely opening the device, and without specialized skills and tools, the probability of damage to the device is extremely high. It is important to remember that service centers, along with support services, are created to help users and collect information on device defects and bugs. So by turning to specialized branches, you are also helping companies make their products better and safer for you.

Removing the SIM card from your Apple device is easy. If you have any problems with this, do not panic and immediately rush to the service center. It is enough to show patience and a little skill, and you will cope with even the most difficult task.

Those who received as a gift or bought their first iPhone face a serious problem when they start working with it. At first glance, it is not known where to insert a SIM card in it. In ordinary smartphones, it is installed under the battery, and new users have no idea how to get into the compartment where it is located. Also, many have heard that standard SIM cards are not suitable for this smartphone. Therefore, the question of how to insert a SIM card into an iPhone should be considered in more detail.

Types of SIM cards used

Depending on the generation, different types of SIM cards are used in a smartphone from Apple. At present, perforations can be found on SIM cards to make it more compact. Thus, you can reduce its size to microsim, which is used in smartphones of the 4 series and below. Before inserting a SIM card into an iPhone, read the user manual. Usually you can find information about the required type of card in it. Series 5 and 6 use an even smaller SIM card, which the manufacturer calls nanosim. Its difference from the previous version is a more compact size by reducing the amount of plastic around the chip, as well as reducing its thickness.

Cutting a SIM card

Before inserting a SIM card into an iPhone, you need to prepare it. This can be done in several ways:
. Cutting a SIM card with a special device that will do it most accurately.
. Replacing a SIM card with your mobile operator in the office.
. Self pruning.

For owners of Apple 4 series devices, all modern SIM cards have perforation, and cutting will not be difficult. The greatest difficulties await the owners of more advanced devices of the 5th and 6th series. To insert a SIM card into the iPhone 5, you need to cut it as much as possible. It is quite difficult to do this on your own, since it is very easy to damage the chip. It is also necessary to grind off a little the thickness of the plastic with the help of iPhone users, when cutting the card on their own, it is advised to leave more plastic around the chip than necessary, and then adjust the size with a needle file.

How to insert a SIM card into an iPhone: instructions

In order to install a SIM card in a special slot, you need to find a key in the kit, with which you can pull out the SIM card holder. To do this, you need to insert the key into the hole on the case, press it, and after that the card slot will pop out. In order to insert a SIM card into the iPhone 4S, you need to find a key hole and a panel on the side of the device case. After the compartment for the SIM card comes out, you need to put the card cut to microsim into it and install it back. After this procedure, if everything is done correctly, the phone will detect the card and register on the network. Similarly, you can insert a SIM card into the iPhone 6, the only difference is the location of the compartment for the card. It is located on top, near the power button, and it contains a card cut to nanosim.

What to do if the phone does not come with a special key

Many users are faced with a situation where the key for installing a SIM card is lost. The fact is that this is a very small accessory and it is easy to drop it out of the box and lose it, for example, when checking the device in a store. It is easy to replace a special key with an ordinary paper clip, which needs to be slightly unbent. Open the compartment carefully so as not to damage the device. Installing a SIM card in an iPhone is usually not difficult. Cutting a SIM card if you need to get a nanosim is best left to specialists in a communication salon or exchange your old SIM card for a ready-made one at the operator's office. At the moment, due to the widespread use of Apple devices, major communication companies are producing cards suitable for these smartphones.

In conclusion, an interesting fact. iPhones appear in a lot of movies and TV shows, but as a rule, the phone model has no connection with the storyline and is most likely chosen randomly. For example, in The Big Bang Theory, Dr. Koothrappali managed to fall in love with Siri, the voice assistant of the iPhone communicator. Often the appearance of a familiar logo on a screen or in literature is a well-planned advertising campaign.

No mobile phone will work without a SIM card. Rather, it will work, but it will not fulfill its main function. Given the variety of slots and formats for SIM cards, it is important to know how to insert a SIM card into an iPhone. There is nothing complicated in this, but some points require clarification.

Note that modern smartphones (especially iPhones) are undemanding to this process. For example, the old Nokia phones were incredibly difficult in this regard. I had to bother a lot and look for a slot where to insert a SIM card. In the iPhone, everything is provided for the convenience of the user: there is no need to remove the back cover, and even a special tool for removing the tray is included in the kit. However, the tray itself was not invented by Apple. All the same company Nokia first implemented a removable tray. But this is past history, and we will go directly to the question itself.

Types of SIM cards

First of all, we pay attention to the fact that different iPhones use SIM cards of different sizes. The third generation of phones from Apple worked with SIM cards of regular sizes. Then came the fourth generation of phones that could only insert Micro Sim cards. Further, the fifth, sixth and seventh generation only work with Nano Sim cards.

All these cards differ only in size: width, length, thickness. Therefore, when buying a starter pack, it is important to check with the seller so that he sells the card of the size you need. Some starter packs come with cards of all sizes at the same time: that is, there are special bending lines along which you can break out a card for your phone.

Will a regular SIM card fit in the Micro SIM slot?

During the shortage of Nano and Micro SIM formats, people did not know how to insert a regular-sized SIM card into an iPhone, but they still found a way out. They simply cut an ordinary large SIM card to the required size and inserted it into the phone. Even the metal contact had to be cut off. Surprisingly, it worked and the phone perfectly received the signal of the desired operator. Even today, an ordinary standard size SIM card can be cut to the size of Nano or Micro SIM and it will work.

But there is no such need now. Operators sell SIM cards of all sizes. And if you still have an old large SIM card, and you bought a phone where it does not fit, then in any mobile phone store you will be replaced with the desired size. In this case, you do not need to know how to insert a SIM card into an iPhone. This can be done even in the store, and you just have to watch.

SIM card installation

So, how to insert a SIM card into an iPhone? In the box, the phone always comes with a paperclip (it is also called (iScrepka), with which the tray opens. This paperclip can be seen with something else: a pin, a needle, nail scissors, even a toothpick. But this can simply damage the tray. It is located with right side (on the side of the phone).

We take our paper clip, insert it into the hole of the tray (a very small hole), press down a little, after which the tray will come out a few millimeters. Then just take it out with your hands completely.

When the tray is in your hands, place the SIM card in it. It is important that it be placed chip-side down, otherwise the card will not work. Although the tray is designed in such a way that it is impossible to insert a card in a different way, some users manage to do this.

Now insert the tray with the SIM card back into the slot and press down a little.

Settings

Now we know how to insert a SIM card into an iPhone, but what to do next? Important: You don't have to turn off your phone. Previously, you had to remove the battery, and only then insert a SIM card, but now there is no such need.

After the SIM card is inside, the phone will ask you to unlock it. It's normal that it's disabled by default. To do this, you will need to enter a PIN code. You must know this code for sure (it is indicated on the starter pack), but if this is your old card, then you already know it for sure.

We enter the PIN code, the lock is removed and the phone finds the desired network. If the network cannot be found, then in the settings there is an item "Operator". There you can choose the operator to which the card belongs. The default is "Automatic", and in this position everything should work fine. But there are exceptions. Therefore, just select your operator and the phone will immediately find the network. But if problems arise and you still don’t know how to insert a SIM card into the iPhone 5S, then proceed to the next step.

If the SIM card is not detected

If after the manipulations and even the choice of the operator, the phone writes: "No network", then this means that you inserted the card incorrectly or the SIM card is not working. But it can be even worse: this is when the phone is tied to another operator and can only see its SIM cards.

Yes, it's annoying, but it's not a big deal. They learned to remove the lock long ago, so special slots for iPhones are sold on the radio markets, with which even a locked phone will work with any operator. Such a tray is inexpensive - about 150-200 rubles. The kit includes the tray itself, a special chip gasket for the SIM card, and a paper clip.

This article describes in as much detail as possible how to insert a SIM card into an iPhone 6, but this instruction is valid for all models.

Before thinking about how to upload your photos or, the user should take care of providing the main function of the device: the ability to make voice calls and send text messages. Both are impossible without installing a SIM card in the iPhone - not only an Apple specialist, but also the owner of the phone can correctly put it in the slot. How to insert a SIM card into an iPhone or change an existing one - let's try to figure it out.

Preparing for the first run

The first thing a happy iPhone owner needs to do is turn off the device by holding the power button. You can also open a slot “for profit”, however, in this case, the probability of failures in further work increases sharply; it is better to be patient and act strictly in accordance with the manufacturer's recommendations - since this is also not difficult,.

Important: You can insert and remove a SIM card from your iPhone without opening the cover of the device. It is enough for the owner of the phone to follow the simple instructions below - and not to climb unnecessarily into a rather complex system of cables and radio components.

The power button is located, depending on the device model, on the upper end (older versions) or upper right (more modern). You need to hold it until you are prompted to turn off the phone - after which, after waiting until the screen goes blank, proceed to further manipulations.

Determining the SIM format

The next thing the owner of the iPhone should do is determine the desired SIM format. To do this, you need to carefully consider the existing SIM card and check the accepted terminology:

if the SIM card has not yet been broken out of the holder, it is simply called SIM - in modern iPhones and smartphones based on the Android OS, this format is not used (number 1);
SIM cards of the usual size (15 × 25 millimeters) are called mini-SIMs and are installed in third-generation devices that are clearly not related to (number 2);
smaller sims (12 × 15 millimeters) are micro-SIMs used in fourth-generation iPhones (number 3);
SIM cards measuring 12.3 × 8.9 millimeters are called nano-SIMs and are used in new iPhone models starting from the fifth generation (number 4).

Quite often, mini-SIMs are simply referred to as SIMs; while the classification of the remaining sims remains unchanged.

Important: a user who purchases a new SIM card for an iPhone does not have to worry about compatibility. The original mini-SIM does not even need to be cut to fit your device - just carefully break it down to the desired size, remembering to save the frame just in case - it can come in handy when switching to another device.

If the SIM card is old, do not cut it manually - there is a high risk of damaging the chip. It would be much more reasonable to take the SIM card to any service center or, if funds allow, purchase a device to adjust the format at home.

Advice: you should not break out the SIM cards from the holders until the slot is removed from the iPhone - there is always the possibility of making a mistake with the size. If you need to "grow" a SIM card from a smaller size to a larger one, just insert it back into a suitable frame - the one from which it was taken out, or any one that was at hand.

SIM card installation process

Now, having decided on the format of the SIM card for iPhone, you can proceed to the main thing - try to insert it into the slot. This is not as difficult as it might seem - much easier than. The user needs:

Find on the right side of the device (in new models - immediately under the on / off button) a small hole, the diameter of which fits a regular paper clip.

Take a special paper clip that came with the device - or, as just mentioned, a clerical one, dip the sharp end into this hole and press without applying undue effort.

Wait for a characteristic quiet click, followed by detachment from the end of the front cover of the slot, and carefully remove the SIM card holder.

Once again, check with the required size of the SIM card, break it out of the frame and immerse it in the slot - it will fall along the guides by itself.

Carefully, again until a slight click, insert the slot back into the iPhone. Now you can turn on the phone by pressing the appropriate button and start working in normal mode.

Fine! The SIM card is installed in the device and after a few seconds it must be authorized by the operator. Having successfully completed the task, the user should not stop there - it is much better to expand their knowledge even more by learning how to use this multifunctional service correctly.