How to make original chandeliers and lamps for the home from improvised materials. DIY chandelier: manufacturing principles with a photo

Lighting devices can not only dispel the darkness, but also give an unusual aura to your interior.

There are many different ideas with which you can make Wall Light or any other type of lamp with my own hands.

You yourself are able to create a masterpiece that is not in any store.

Creating an extravagant chandelier

Very original thing is obtained from the simplest materials, most of which can be saved after a picnic. Lamps from various containers will look spectacular.

For this you will need:

• oval plastic bottle with a capacity of 5 liters;
• disposable spoons;
• cable with cartridge and plug;
• low power LED lamp;
• pliers;
• glue gun;
• screwdriver;
• stationery knife.

To avoid fire, use only LED bulb!

With a knife, carefully cut off the bottom of the bottle, then remove the handles from all plastic spoons. Apply to the cut a large number of hot glue from a gun, stick them on the bottom of the container.

Approximately you will need about seventeen pieces. Place the next and remaining rows in a checkerboard pattern.

In order to hide the neck of the bottle, put ten to twelve spoons without a handle on the glue so that they form a ring.

Pull the cartridge with the lamp and cable through the hole at the bottom of the bottle.

If you do not want to make this part yourself, you can purchase it in any department of household goods - the wire, cartridge and plug are already connected together.

Make a hole in the lid for the cord by drilling it with a drill or a hot self-tapping screw. Screw on the lid, put on the previously prepared ring of spoons on top. Exclusive LED lamp ready for operation.

A few ideas for creating lampshades

It is enough just to create a lamp from improvised materials for a house or a summer residence.

Idea N1

• any hollow dishes (it can be an old pan or flower pot);
• wire;
• polyurethane foam and gloves;
• paint and brush;
• sharp knife;
• pliers.

Place the object taken as a basis upside down. Wind the wire around the product the way you want to see the lampshade, since all the turns copy its shape. Put on gloves and squeeze the foam a little bit onto the frame so that it completely covers the wire, leave to dry.

Then, using a knife, give the contours more evenness and paint in any color. This option will be the best for a street lamp.

Idea N2 is a classic

• thick wire;
• pliers;
• small water bottle.

Note!

To make the upper central element on the bottle, wind a coil of wire, then remove it and cut off the excess. The ends must be fixed so that they form a ring whose diameter should allow the cartridge to pass through at the bottom, and prevent it from coming out at the top.

Next, you need to make a large outer ring from the wire. To secure it, you will need four equal pieces of wire. Connect one edge of each with a small one, and the other with a large ring. The upper part of the lamp is ready.

The largest will be the lower circle of wire, it must be attached to the second upper one, evenly placing five identical pieces of wire.

To decorate the frame, pass the wire through the second upper ring, giving it a wavy shape, wind it onto the base. Do the same for the bottom ring.

Note!

On a walk through the forest, take an interestingly shaped branch with you, an excellent wooden lamp will come out of it. Wash the branch and peel off the bark from it with a knife, varnish it for wood. For good stability, screw the lamp to a heavy stand with screws, it can also serve as a tree.

A better option is an oak, find a broken branch and saw off a circle of at least five centimeters thick from it. Coat it with varnish or paint it too.

Making a lampshade with children

There is an option for making a lampshade with children. For the frame, you need a canister or bottle with a capacity of five liters. You need to roll the paper strips into a tube, it is best to wind them around a pencil or sushi stick, then glue the remaining edge with glue.

These blanks must be glued to the frame in several layers so that there are no gaps. When the glue dries, you can put the lampshade on a table lamp or make a ceiling lamp that looks very unusual.

Experienced needlewomen can knit or crochet a lampshade, decorating it with knitted flowers and ribbons.

To give the product the correct shape, you can use a starch solution or ordinary PVA glue. Look at the proposed photos of knitted lamps, how much tenderness and comfort they have!

Note!

This article told you how to make a lamp with your own hands. Using the information received and your own imagination, now you can create an exclusive lighting fixture for any room.

DIY lamp photo

Interior design is incomplete without lighting design. The right light fixture can completely transform a room. To show your individuality and creative inclinations, try to make a chandelier with your own hands. There are no restrictions on the choice of materials. Get inspired by lighting ideas handmade in different styles, three detailed master classes will help you make a unique piece of decor with your own hands. And tips on connection and installation will help with installation.

The first step is to decide on the material that you will use as a basis:

• old chandelier;
• all kinds of rings, hoops, frames - for the frame;
• elementary paper lampshade;
• natural materials;
• other.

The easiest way is to use an old unnecessary chandelier as a base, which has already served its purpose. Such restoration will help to look at this rarity in a completely new way and extend the life of the lamp. There is a clear advantage in using old frames: the main elements, such as the frame, fastening and the entire electrical part, are already ready. You just have to deal with design, without thinking about any technical points.

The rest of the materials will require more attention to the connection of wires and cartridges. Homemade chandeliers and lamps on a flat round or other shaped frame can be of any size, made in different styles and techniques. The manufacturing principle is simple: various decorative elements: beads, fringe, paper and cardboard figures and various unusual things. It turns out effectively.

Another easy way to make a DIY chandelier is to use a paper lampshade that you can buy at the store. Lampshades come in different sizes and colors, you need to choose in accordance with your idea. You can use several identical lampshades to create one lamp - fantasy will be where to roam.

A paper lampshade costs a penny, and there are hundreds of ideas for its reincarnation!

The use of natural materials has become a new trend in interior design. Creative ideas using branches, roots, cones and other improvised means are becoming more popular and find a place in different design styles.

An ordinary branch in skillful hands turns into a lamp in scandinavian style

If there is no suitable frame, you can always take a coil of wire and make a base for a chandelier out of it. desired shape. Another option is not to use the frame at all, replacing it with a balloon for a while.

Video: do-it-yourself chandelier-ball of threads

What chandeliers can be made with your own hands

You need to choose ideas for creating a lamp on the ceiling, depending on what style you have chosen to decorate your home. Approach the question responsibly, look at the photo original chandeliers, made by yourself, and choose the most suitable lamp for your interior that you like.

Homemade lamp in boho style

The now popular boho style is the most suitable for hand-made lovers. This is a free style that is distinguished by a variety of materials, colors, textures and shapes. In such an interior, everything is possible, and the chandelier should be its highlight.

Artificial flowers will decorate any craft

A little fringe and hot glue - fresh and original

Fringe is a favorite element of boho lovers. When creating a chandelier with your own hands, this material will come in handy. Moreover, all kinds of braid with fringe are found on sale, which further simplifies the process.

In order to make a boho ceiling lamp, take a few rings. different sizes, connect them in decreasing order and decorate each with a braid. The original chandelier is ready, it remains to fix the cartridge with a wire.

Alternatively, instead of a ready-made factory fringe, you can use colorful or plain ribbons, ribbons and threads. It will take a little longer to tinker, but as a result you will get one-of-a-kind homemade chandeliers.

Even old T-shirts and dresses cut into strips are suitable as a braid.

Retro and vintage

In the interior vintage style homemade chandeliers and lamps fit quite organically. The most suitable option in this case is a converted chandelier of those times. It can be found in your grandmother's house or at a flea market for a penny. The main thing is that the device works. But even if it does not work - it does not matter, you can always fix it.

Suitable for a vintage lamp decorative ornaments:

• crystals;
• beads;
• lace;
• feathers.

Remove the old shades and decorate the frame with the prepared plastic crystals.

Important! To make the picture whole, use light bulbs in vintage style- depicting candles. A retro chandelier will lose its charm if spiral housekeepers are screwed into cartridges.

A fringe with feathers glued onto a paper round lampshade around the perimeter will turn the lamp into something weightless and airy. Such a handmade chandelier for a vintage-style home will become the center of the composition. Start gluing from the bottom tier, gradually rising up. Your task is to hide the attachment points with the next layer of feathers.

Such a lampshade is suitable for both retro interiors and modern design Houses

Another essential attribute is lace. But how to make a lace chandelier with your own hands? A balloon, PVA glue and grandmother's lace napkins come to the rescue. If you know how to crochet, you can make some lace doilies specifically for this purpose.

Take a few knitted elements, soak them abundantly with PVA glue. Do not worry, after drying, the glue will become transparent and will not be noticeable. Take a balloon of the desired shape and size. Lubricate the surface of the ball with a fat cream or oil and carefully glue the napkins.

Your ceiling can be in the shape of a ball, then you need to start gluing from the bottom. The central element of the first napkin should be strictly in the center of the lamp. If you need a slightly open ceiling, you should start with the side surfaces.

After the glue has completely dried, air must be released from the ball. Remove the ball and the ceiling is ready.

The idea is ridiculously simple, but how effective!

Experiments with lamps in the nursery

Often, when making repairs in the nursery, parents cannot choose a chandelier that the child would like and look good in the interior. If you find yourself in this situation, learn how to make a DIY chandelier and create the light fixture your child dreams of.

Many girls dream of a room that looks like a fairy or princess bedroom. A magical chandelier made of rose petals floating in the air will be a good addition to a fabulous nursery. Use an old floor lamp shade as a base or make a steel wire frame.

As a decor, ready-made petals of artificial roses, which can be found on sale, are suitable. Another option is to make the petals with your own hands. You will need thin fabric for this. desired color, which will not crumble at the edges. Of the tools, scissors and a needle and thread are enough.

Cut round petals according to the prepared template. Connect them with a thread to make garlands. Attach the resulting threads to the frame around the entire perimeter. In the center of the frame, make a wire base for the cartridge and a suspension for mounting on the ceiling.

This chandelier is as light as a ballerina and as delicate as a feather.

If you have a glue gun, making your own lamps will not be a problem. Cool idea for the nursery - a colorful chandelier made of plastic cups. Glasses should be made of durable and transparent plastic. These are often found in the party departments next to balloons and caps.

The work on connecting the elements is quite scrupulous. Start from the middle. Choose diameter and connect right amount cups around the circumference. Cast on rows one by one until you reach the top of the lampshade. Then turn the piece over and repeat on the other side. The bottom of each glass should face the center of the sphere. In the middle there will be a fairly large space where you can easily put a light bulb.

DIY children's lampshade - everything is very simple

Ideas for simple lamps for a couple of dollars

A very simple, but at the same time cute idea is a plywood night lamp. The choice of form is limited only by your imagination. A plywood figure is attached at a short distance from the ceiling or wall, and behind it is a light bulb. The result is a muted diffuse glow around a dark silhouette.

A popular option is the cloud. Cut out a cloud from plywood or chipboard, for beautiful composition you can make a few more reduced clouds. Paint the clouds white with non-toxic acrylic paint. Attach to the cloud from the back metal elements in the shape of the letter "P". Pull out the wires and connect the cartridge. Then screw your cloud to the wall, hiding the wiring and light bulb behind it.

You can make such a chandelier-night light with your own hands in just a couple of hours.

IMPORTANT! Please note that any homemade chandeliers can only be used with those types of light bulbs that do not heat up during operation. Diode bulbs work best. They do not heat up, shine brightly and consume little electricity. In addition, a variety of shapes allows you to choose a light bulb even for the most original lamp.

A simple and traditional way is a cylinder lampshade. These are often found on old floor lamps. From two identical circles form the upper and lower edges of the ceiling. A fabric or paper is stretched between them. Depending on the color and the presence of a print, the same chandelier model can be presented in completely different styles - from ethnic motifs to minimalism.

Such a lampshade can even be made from a piece of wallpaper

Simple but spectacular idea- spider chandelier (photo below). Its highlight is in long wires that are not hidden anywhere, but on the contrary, serve as decoration for the ceiling. They resemble the long legs of a spider, which is why this model is so named. A cartridge is connected to each wire, and a light bulb is screwed into it. The wires spread along the ceiling in all directions, are attached at the anchor points and hang down. Bold and extraordinary, very simple to perform.

The lamp really resembles a large spider with thin legs.

The most original ideas for the brave

In principle, to make chandeliers for the home with your own hands, you can use any object without exaggeration as a basis. Turn on the imagination, and you will understand that any thing can be creatively beaten.

Old wooden clothespins? Why not an idea for a homemade lamp! The principle is the same: frame, decor, cartridge mount, fixation on the ceiling. The result will exceed your expectations. Such a chandelier will decorate the interior in the loft style. Looks very original.

wooden clothespins- stylish and eco-friendly

A skein of thread and a flower basket? Wonderful! Don't be afraid to experiment. Cut the threads and tie them to the top edge of the basket. Tie a knot from below, straighten the drapery a little, decorate with beads to your taste and attach to the ceiling, where the wiring has already been brought out and the light bulbs have been connected.

Everything ingenious is simple, and this idea is proof of that.

Pompoms, origami figurines, Christmas decorations, beads, crockery, tea set, cutlery, CDs, all kinds of scraps, scraps - if you wish, you can transform this trash into a breathtaking lamp.

Chandelier making step by step tutorial

For those who want to try to make chandeliers with their own hands, we offer original ideas And step by step guide. most popular and good ideas lamps are considered in more detail. If you follow the recommendations and make a little effort, it will turn out the same as in the photo, or maybe even better.

Chandelier from plastic bottles

Some people think that used plastic bottles should go to landfills. last resort- to the plant for the secondary processing of raw materials. But some needlewomen do not think so. Lampshades of incredible beauty are made from ordinary green, brown and transparent bottles from drinks.

Fantastic lamp you can do it yourself

Such a chandelier made of plastic bottles in the form of leaves can also settle in your home. To do this, collect the necessary materials and tools:

• bottles of several colors;
• scissors;
• thin wire;
• awl;
• soldering iron;
• wires;
• cartridge;
• switch.

Tools and materials

Instructions for the manufacture and assembly of the chandelier:

1. Draw a stencil in the shape of a leaf. It is better to do this on thick cardboard.
2. Cut out the resulting sheet.
3. Place the stencil on the plastic and circle it with a pen. Find the optimal arrangement of templates so that there are as few scraps as possible.
4. Cut identical leaves from plastic of all colors. The edges of the leaves may seem too sharp and sloppy to you - don't worry, we'll fix it soon.

chopped leaves

1. When the stock of leaves is ready, we proceed to processing. This is where a soldering iron comes in handy. Warm it up and run along the edge of each element. The plastic will begin to melt and the leaves will begin to round.

Turns out pretty neat.

1. Process all the details in this way.

Leaves need to be prepared a lot

1. Using an awl, make holes in each sheet at the base.
2. Collect twigs from wire and leaves. Use different shades to make the branch more voluminous and brighter. Fasten the wire in the holes of the plastic, try to make the branches thick to hide the wire behind the leaves.

Branches of wire

1. Let's start assembling. From small branches, collect large ones, connecting them together with the same wire as if you were weaving a wreath. Form a lampshade of the shape you need. The wire is flexible, if something went wrong, it can always be corrected and trimmed.
2. At the base of the chandelier, make a wire mount for the cartridge.

1. Put the shade on the chandelier.

Luxurious glass chandelier

From wine glass bottles you can create unique chandelier for living room or bar. The idea is large-scale - a powerful wooden base and a dozen bottle-plafonds for light bulbs. All this bulky structure will be suspended from the ceiling.

Can a real connoisseur of wine have another lamp?

What you will need to make a DIY bottle chandelier:

• wine bottles - yes different color and brands, but similar shape and size;
• boards;
• chains for suspension;
• self-tapping screws with loops - for fastening;
• glass cutter;
• jigsaw;
• grinder;
• drill;
• stain;
• cartridges and wires.

The master class is quite difficult, but detailed instructions will help you solve the problem:

1. Prepare the bottles: clean them from the labels, wash, dry. Make a mark at the same height on each bottle. Cut off the bottom of each with a glass cutter.

Sometimes labels have to be soaked in water for better peeling.

1. Take care of the boards. Cut them with a jigsaw into segments of the desired size - be guided by the area of ​​\u200b\u200bthe room and the number of bottles (in the example there are 10 of them).

sawing boards

1. Finish the edges with a grinder. The ends should be as smooth as the rest of the surfaces.
2. Stain the wood with a stain. The color depends on your interior. The author chose a dark shade.

Get a deep noble color

1. Mark the places for installing bottle-plafonds. They will be installed symmetrically in two rows of 5 each.
2. Using a drill with a 25 mm wood core bit, drill holes in each mark.

Hole drilling

1. At the corners and perimeter of the base, screw the screws with loops from above for fastening to the ceiling. Measure the lengths of the chain of the desired length and connect to the base.
2. Insert the necks into the bottle holes.

bottle hole

1. Prepare 10 rounds and connect them to the cables. Thread each separate wire through the bottle so that 10 wires remain on top of the lamp.
2. The cables are connected in a circuit and insulated. Hang the chandelier by chains. Connect electricity.

Finished wine bottle lamp

Pearl strands - a chic idea and implementation

Glamorous shabby chic chandeliers or sparkling Swarovski - lamps made of stones and beads attract attention and make any interior festive. Making a chandelier of beads and rhinestones with your own hands seems to be something out of reach, in fact, the technology for creating it is very simple.

For such a bright and massive model, prepare:

• ready-made garland beads (sold in any department for decor) or a large number of beads, fishing line and patience, if you decide to collect the threads yourself;
• garden hanger for flowers or other similar basket;
• acrylic paint in a can;
• knitting wire or special wire for making jewelry;
• glue gun and rods for it;
• wire cutters.

Necessary materials

How to make a lamp from beads with your own hands:

1. Prepare beads. It is better to take ready-made beads (for example, to decorate a Christmas tree), otherwise you will have to tinker with stringing. If the color does not suit you, paint them with spray paint.
2. While the beads are drying, take care of the basket. If it is rusty, brush over the metal. If in good condition or new - just paint.
3. The beads are dry. Now from several garlands you need to assemble one large length. Connect the outer beads with hot glue.
4. Cut the wire with wire cutters into pieces of 5-7 cm. You will need several hundred of them for such a chandelier.

The work is monotonous, but it goes fast

1. Take a garland and one piece of wire. Attach the beads to the basket at the bottom. Continue beading the basket, securing the result with wire so that the decor does not move to one side.

DIY decor for the bottom of the lampshade

1. When the lower part of the basket is completely ready, proceed to decorate the upper half. Long threads are passed through the top of the lamp and pulled over the top edge of the basket. Do not pull the garlands, they should hang freely. Fix them on every turn.

Almost done - it remains to remove the remnants of the wire

1. If you did everything right, the beads completely hid the basket and hanging chains. You can decorate the resulting masterpiece with ribbons, rhinestones or other elements.

Beautiful with and without a ribbon - it's a matter of taste

Subtleties of installation and installation

With the design of the lampshade, everything is clear - there is a place for fantasy and fiction. But what about the electrical part? After all, even the most luxurious chandelier will not work without a correct and safe connection.

We really hope that if you decide to make an electric lamp yourself, then you are familiar with the intricacies of installation and safety rules. But just in case, we list all the important little things again:

1. Never spend electric installation work(even the banal replacement of a burnt out light bulb) with the power on.
2. Do not hang the chandelier by the cable. The design should be based on a suspension: a chain, a rope, a cable - anything, but not a working cable.
3. The light bulb should also not hang on the wire - because of this, breakdowns most often occur. Provide a mount-support for the cartridge at the base of the lamp, so you will remove the load from the cable.
4. Use an indicator to identify the phase of the wiring. You do not need to do this "by experience", connecting the device at random.

The yellow wire usually means "ground"

1. Use 3-wire double-insulated wire. The cross section is selected depending on the total power of the device. For a lamp up to 60 W, an area of ​​\u200b\u200b0.35 mm 2 is enough, up to 120 W - 0.5 mm 2, up to 300 - 0.75 mm 2.
2. Make good contact at the joints. A bad connection can cause the wiring to heat up, which is very dangerous.

Use a screwdriver to fix the cable in the chuck

1. Incandescent lamps are incompatible with paper lampshades - this is a fire hazardous combination.

As you can see, subject to simple rules safety and creativity anyone can make a homemade lamp. Photo ideas inspire the search for creative solutions and an extraordinary approach. Your lamp will become a reflection of your personality and decoration of the room.

The cosiness and comfort in the room depends on the lighting. Do home atmosphere full heat can be made by making a lamp with your own hands. Ideas to help you personally and with minimal cost to make an exclusive and fashionable lampshade, you can learn from this article.

Pendant lamp in the interior

Training

What you need to know before making a lamp:

1. It is recommended to use LED or energy-saving light bulbs, creating your own designer lamp. Standard incandescent bulbs get too hot and can damage its structure.
2. If the finished lamp is disassembled, you need to be extremely careful with the wires, and after finishing, make sure that they are intact.
3. There are bulbs of several color temperatures. When creating a pendant lamp for the home, it is worth opting for a “warm” shade.

An illustrative example for distinguishing color temperature: than more on the box, the higher its temperature, and the colder the shade of light it has.

Light bulb color temperatures

Frame selection

Before you make a lamp, you need to prepare the base. Most often, it is a pair of rings to which a backing of cardboard or plastic is attached to give shape.

The following ideas will help resolve the issue of finding the basis of the future lampshade:

• You can make this type of frame yourself, with only wire and pliers on hand.
• Frames are sold at construction stores or in craft shops.
• Often in the flea market there are old lamps, where you can get the frame.
• Instead of a frame structure, the lamp holder can hold the neck of a 5 liter plastic bottle. Therefore, there is a solution in the figure below.

DIY lampshade

Lighting Ideas

There is nothing complicated in decorating a pendant or table lamp with your own hands. But it is better to draw a sketch on paper before starting work. The process will be simple and fast, and changes can be made along the way.

"Live" lamp

This designer lampshade is called "Photosynthesis". It was designed and implemented by an author from Tel Aviv. The frame here is represented by a metal mesh, at the base of which is placed indoor plant. As it grows, the flower fills the entire interior space of the lamp and makes the design of the room look summery and fresh. Here it is not necessary to use a regular LED. Making such a pendant lamp is not too troublesome. You can add variety to its decor, given what accessories and tools will be available.

Suspended "live" lamp

When making such a lamp with your own hands, you can not use an overly heavy pot with a plant. Special attention you need to give insulation to the wiring and run it along the supporting wire.

Making a lamp with your own hands from fabric is a great solution, because big choice colors and textures allows you to realize many creative ideas and create decorative lampshades for a room with any interior. First of all, you need to prepare the necessary materials:

• the cloth;
• adhesive tape or self-adhesive film;
• ruler or centimeter;
• scissors;
• simple pencil;
• metal rings for the frame;
• binders;
• tassel;
• glue;
• strip of paper.

Sequencing:

• Before you make a lamp, you need to determine its shape. For a fabric product, a cylindrical base is ideal.

When deciding on the height and width, you should take care that the base is not too close to the light bulb.

• It is necessary to cut a rectangle from the adhesive film and a flap of fabric, the edges of which are 5 cm larger. Attach the fabric to the table with the film, face down.
• Find the most beautiful pattern on the fabric that should be on the lamp and use a ruler to draw corners and a dotted line.
• Align the fabric and stick a film on it.
• Using paper clips-binders, fix the lampshade on the surface of the frame from below and above.
• With a pencil, mark the edges and the side that will be on top. Glue the parts of the lampshade to each other, let them dry.
• Turn the structure over, apply glue to the edge and insert a wire ring. Fasten with binders, let dry. Repeat the procedure on the other end.
• Glue a strip of paper from the edges. After it dries, glue the fabric strip on top. Do the same on the seam on the side of the lamp.

DIY fabric lampshade

If you make small triangular cuts in the paper while gluing it, it will bend better.

There are other ideas on how to make a lamp with your own hands. Using various materials and accessories, you can create no less impressive decorative lampshades from threads, paper and other improvised means.

photo collage

To make such a designer lampshade-photo frame, you will need:

• frame, as in the previous example, or a finished purchased lamp with a clean white lampshade;
• several sheets of tracing paper;
• scissors;
• PVA glue;
• simple pencil;
• printer (recommended to use an inkjet).

Selecting your favorite and beautiful pictures, with the help of photo editors you need to make a collage. You can collage images by cutting them out of paper. This method leaves a lot of room for creative idea: any decor can be applied to the lamp, not just a photo: a drawing of a child, a motivating aphorism or a map of your favorite area.

DIY table lamp photo collage

Before you make a lamp out of photographs, you should make sure that the paint dries. It is strictly not necessary to bend paper sheets of tracing paper, because the place of bending will always be evident.

Rope Sun

Creating such a pendant designer lamp is much easier than it seems. Required tools:

• threads;
• glue (for wallpaper or PVA);
• petrolatum;
• balloon.

Initially, the already inflated balloon is lubricated with petroleum jelly. This is necessary so that threads do not stick to it. The threads are dipped in glue and wrapped around the ball. After the product dries, it is blown off and removed. Rope sun crafting completed.

What needs to be done to make the decor of the lamp as successful as possible: firstly, you should first “get your hands on it” and make a couple of small lamps for testing. Secondly, before winding the threads on the ball, you need to mark the place where there should be no threads. Through this hole, the ball will be removed, and the light bulb will be inserted.

Making a lamp

To carry out the decor of the lamp is half the battle. The main thing is a quality work done without sad consequences. Therefore, the following factors must be taken into account:

1. If a luminaire hanging from the ceiling is connected, the junction of the wires and the product itself must be covered with a protective cap.
2. If during operation, the light bulb becomes very hot, the designer lampshade surrounding it should not be too close. That's why you should use low incandescent bulbs.
3. If the product is heavy, it is strictly forbidden to hang it on wires. For this, special rods, cables or brackets are specially provided for mounting on walls or ceilings.
4. To illuminate a room with high humidity: a bathroom, sauna or bath is better not to implement your own ideas for making a lamp with your own hands, but to buy and install a special product that has moisture protection.
5. During the installation of the lamp, the wiring must be insulated to exclude the possibility of injury to the master and his relatives.

With my own hands. Video

How to create a LED lamp with your own hands from improvised materials, this video will tell.

Decor made of paper, photographs, threads, fabrics and any other means has its own advantages over finished goods purchased at the store. With a minimum of costs and time, decorative lamps not only decorate the home, but also emphasize the originality of its owner. DIY modeling lighting fixtures is an opportunity to realize your creativity, decorate the interior and bring relatives together for joint work.

It takes ~3 minutes to read

Each piece of interior, which is made by hand, is able to fill the house with special comfort and warmth. In addition, such crafts will not only look great in any room, they will become a completely exclusive thing. Chandeliers that are made on their own with the help of improvised materials will look very original in the house. This is a wonderful idea!

To create such a beautiful product, discover the inimitable design talent that exists in every person. It is this revealed quality that will bring into the house not only bright light, but also a cozy atmosphere.

DIY kitchen chandelier

Such a product of needlework will look very elegant and graceful in the kitchen. And when guests come to the house, they will not even be able to guess that such a chandelier was made by hand, and not purchased in an expensive designer store. Imagine their admiration if they find out that it was you who could create such a masterpiece as a chandelier with your own hands. In the kitchen with such a product is always fabulous.

You will need the following materials:

1. A leg that can be removed from an old chandelier.
2. Hemisphere, which is made of metal.
3. Any light fixture that has been used in the home in the past. You can disassemble and remove the necessary part. If this is not available, then an old school globe, previously cut in half, will do.
4. Sandpaper. It may not come in handy, but it should still be available just in case you need to do some sanding to get the surface perfect.
5. Wallpaper glue. Use this particular type, because, after drying, it will become completely transparent.
6. Ordinary sponge.
7. Dye. For the manufacture of a chandelier, you can take a matte one, which is also used for painting walls.
8. The fabric is white.
9. Artificial leaves as well as flowers.
10. Half beads.
11. Beautiful tape.

So everything the right materials are at hand, you can come directly to the manufacture beautiful chandelier for kitchen.

1. First, dilute the glue and lower a piece of fabric there. All material must be completely saturated with glue. Now you can lay out a sticky piece of fabric on the previously prepared hemisphere - this is the future ceiling. In order to make it more convenient to make folds on it, you can use any sharp object to make small cuts. Everything that remains to stick out, wrap it inside the product. The lamp must be glued absolutely completely.
2. Give the product time to dry.
3. We take a sponge and paint the surface with it (inside and out). As soon as the paint is completely dry, it is better to apply another layer for reliability. Now you can attach the resulting product to the leg.
4. The next step is to decorate the lamp. But first, think carefully. Decide what the final product should look like. You can make several sketches on paper with different options design. Once you have decided, you can move on to further work above the lamp. First glue the decorative leaves in random order. Then comes the layer of flowers. If you have ladybug figurines, for example, you can attach them too.
5. To complete the composition, you can decorate everything with a beautiful ribbon. But fasten it in such a way that it is under the leaves, it is more beautiful.
6. At the end, you can add half beads to the composition. The lamp is ready.

Chandelier made from old plastic cups

Many people are involved in creating amazing and beautiful things that are perfect for decorating the interior of the house. But often everyone forgets about chandeliers and lamps. Or maybe there is simply no idea for creativity ... That is why people so often ask the question: is it possible to make a chandelier with your own hands using what is at hand? Yes, sure!

Necessary materials:

1. Plastic glasses (about 300 pieces).
2. Staples and stapler.
3. Bolts.
4. Washers (one large and small).
5. An energy-saving light bulb (it is this type that is taken, since the usual one is very hot).
6. Cartridge with wire.

We proceed to the manufacture of the chandelier:

1. Use a stapler to staple three glasses together. It is best to start the connection from the bottom, and then go to the very top. What happened is the basic design. The resulting product is attached to the rest of the cups. The conical design provides a sphere. And we must not forget that when everything is ready, you need to leave one hole for the cup empty. It is in this last glass that you burn a small hole. Put a large washer inside.
2. The electrical wire is tied in a knot and then pushed through the holes to the outside.
3. Now attach the cup with bolts and small washers. If there is any breakdown, then you can easily disassemble it all. Using the same technology, you can also make a floor lamp by finding a suitable and beautiful stand.

Openwork sconce or floor lamp

Chandeliers (lamps) and sconces, which are made from improvised materials with their own hands, always look very beautiful. Any glass jar can be used as a ceiling lamp, and a container for bulk products is also suitable. Knitted openwork lace will be used for lampshade decoration elements.

To make a lamp, you will need the following materials:

1. Glass container and tin lid.
2. Hex nut.
3. Drill with drills.
4. Electric wire.
5. Bracket and cartridge.
6. Electric lamp.
7. Napkin or any lace product.
8. Aerosol glue, as well as paint.

You can get started:

1. It is necessary to drill a hole in the very center for fastening. And also you need to make four holes in a circle to avoid overheating.
2. Now we fasten the bracket, nut and cartridge, and then install the light bulb.
3. A layer of glue is applied to the surface of the jar, and then lace is applied. They can be applied to any part. Everything depends on the imagination.
4. If you plan to make a sconce, then an openwork napkin can be attached with ordinary tape. After that, everything is painted with spray paint. When the product dries, the napkin can be removed, and the painted form will be preserved.

Chandelier of rose petals (pendant lamp with your own hands)

This is a very romantic version of the pendant lamp.

stock up the following materials before starting production:

1. Wooden hoop (you will need 3 pieces of various sizes).
2. Rose petals (you can buy them in a special store for decoration or make your own by cutting them out of thick white fabric).
3. Silk thread.
4. Starch for paste.
5. White acrylic paint.
6. Fishing line.

Let's get to work:

1. We cut out white circles from the fabric, and then glue them with a paste in pairs. Lay a white thread between them. The length should be approximately 40 or 50 cm.
2. Now let's move on to coloring the hoops. You need to use white paint. Then we hang them on the fishing line in the following sequence: the largest ring comes first, then the middle one, and the smallest will be the last.
3. Now tie the threads with the petals to the hoop. In the place where the binding is made, stick a circle of fabric. This process is very labor intensive. But the result will be excellent.

Wire butterfly chandelier

This is a very original chandelier that will bring into the house constant sensation summer and warmth. Flocks of butterflies will literally come to life after a slight breeze blows. And the best part is that such a chandelier is very easy to make with your own hands. The idea of ​​using a beautiful butterfly when making a lamp is very good.

Necessary materials:

1. A lampshade that has two rings.
2. Chains are decorative.
3. Scissors.
4. Silver paint (preferably in the form of an aerosol).
5. Very thin marker.
6. Transparent plastic.
7. Pliers.
8. Silver wire.

Completing of the work:

1. The lampshade is painted with silver paint.
2. A stencil is made in the form beautiful butterflies. Here you can use your imagination and do everything yourself or find ready samples in the Internet.
3. We cut out butterflies from plastic according to stencils.
4. Several butterflies need to be painted silver. The rest should remain transparent.
5. You need to cut chains 10 cm long. Now you need to put transparent beads on them. So, the product can be given very beautiful view, because the beads will shimmer every time the sun hits them.
6. Next, attach the butterflies with pliers and wire. We attach the remaining end of the chain to the lampshade.

Making from disposable spoons

Such a simple item as a plastic spoon can become a real masterpiece in skillful hands. Consider how to make a chandelier from such material.

Necessary materials:

1. One plastic bottle with a volume of 3 liters.
2. Glue.
3. Wire cutters.
4. Plastic spoons (one large package).

Chandelier assembly:

1. Using wire cutters, separate the heads of the spoons.
2. Next, cut out the bottom of the bottle.
3. Starting from the very bottom of the bottle, we proceed to sticking the heads of the spoons over the entire surface of the bottle. Each new row must be glued so that it goes on the previous one. Arrange the spoons in a checkerboard pattern.
4. When you come to the neck of the bottle, you need to stop. In this place, a ring is made that resembles a bracelet. We make it from well-glued spoons.
5. For this chandelier, only energy-saving light bulbs should be used, as ordinary ones get too hot. And this will ruin the design.

Original idea: thread lampshade

Threads are another very beautiful and simple material at hand that can be used to make a beautiful DIY chandelier. You will get a very unusual ceiling. You need to prepare the following materials:

1. Balloon.
2. Knitting.
3. Starch glue.
4. Lighting fittings and wire.
5. Foam brush.
6. Yorshiki.
7. Scissors.

Manufacturing process:

• First, the balloon is inflated.
• Dip the threads into the glue, and then wrap them around the entire surface of the ball. It is better to arrange the threads evenly in four or five layers. Then they are fixed on the base of the ball.
• Next, cover the surface good layer glue. It is better to use a foam brush.
• The ball should dry well while hanging.
• When the threads are dry, you can pierce the ball and remove its remains from the ball, which is now completely composed of threads.
• At the very top of the ball, in the place where the threads were tied, cut a hole. Dimensions are selected so that you can put a light bulb inside. Light fittings are attached inside.
• In order to fasten, wrap the wire with brushes, then thread them inside the sphere.

That's all, you just need to look around and turn on your imagination to see the potential in any improvised thing from which you can make a truly beautiful product. An idea can come from looking at any object. Good luck in creativity.

Photo examples of unusual shades made from improvised materials

In this article, we propose step by step master classes how to make do-it-yourself table lamps from improvised means that are always in the house. It would seem at first glance ordinary and unnecessary things, but from them you can make original and designer lamps for desktop.

The most popular and simple improvised materials are: glass bottles and cans, cardboard and paper, plastic vessels, water pipes and cement. How to make lamps out of this we will show and tell in this article.

With a simple and elegant copper table lamp, you can decorate any corner of your home with your own hands. It will perfectly fit modern interior from loft style to rustic. Prostate and conciseness - this is the main trump card of this table lamp.

For this you need tools:

• Roulette, marker
• Pipe cutter and washcloth
• Wire stripping and stripping tool
• Pliers and a thin flat head screwdriver
• crosshead screwdriver

M materials:

• Copper pipes
• Acetone and super glue
• Copper corners 90 °, 7 pcs.
• electrical wire
• Plug and Electro chuck
• Switch and light bulb

Table lamp assembly technique

To get started, take a tape measure, a marker, a pipe cutter, a rag, copper pipes and acetone.

Marking and cutting tubes

• Use a measuring tape and a marker to mark where you will cut the copper pipes.
• Do this carefully, accurately measuring every millimeter, because if the details are different, then in the end result they will not be as large as they should be.

• Point the pipe cutter and adjust the diameter of the pipe with the nut. Look at copper tube, gradually readjust diameter with nut, so that the closure goes on until the pipe is cut.
• After, with acetone and a rag, you can wipe the markings from the pipe.

TIP: Our parts have: 3 cuts of 15 cm, 1 cut of 20 cm, 1 cut of 45 cm, 1 cut of 25 cm. We used 12 tubes. When designing your luminaire, please note that the size of the copper cubits will be added.

While the cable is inside, we connect the parts

Paste the pieces together and glue super glue. In order to avoid problems in the future, it is better to glue each part and put it together.

Despite the instantaneous effect of the adhesive, it is preferable to wait a few minutes before proceeding to make sure the pieces are glued perfectly.

Tip: It will be more convenient to apply glue if you use a brush. If you want the lid to be at the very top, install it first. So the first part will be ready, and the cable will go in the other direction.

Instruments:

• Wire stripping and stripping tool
• incisors
• thin flat screwdriver
• crosshead screwdriver

Materials:

• fork
• electro chuck
• switch
• Copper pipes
• electrical wire

Install electrical system

1. Open the faceplate of the cover and start by stripping the insulation. Connect ground ( blue color) and phase (brown, gray or black) using the two screws you find inside.
2. Repeat the same process in the plug and switch.
3. In the switch you will find two pairs of small screws, a cable that you must cut to the height you want the switch at and connect to the appropriate sockets by going inside the small screws.
4. All you have to do is screw in the light bulb to make your copper table lamp.

Finally, put the lamp in a corner or place you like, and you will see how it will become a wonderful addition to your interior, illuminating the space!

Master class: Table lampfrom paper

When I first saw the Robert Delta table lamp, it was love at first sight! The shape is amazing, it comes in various bright colors, everything I like. Recently I thought, since the accessories were amazingly durable, why not use them for the lamp?

Here are all the materials used:

• old lantern or lamp kit
• template and thick cardboard or paper, you can take polypropylene sheets
• glue and putty
• sanding block (medium + fine)
• wood block (add weight to base)

Instruments:

• artistic tapes
• metal ruler / xacto knife
• drill (can optionally replace xacto knife)

Lamp manufacturing technology

• First, print the pattern (6 of each triangle) (1 of each hexagon).
• Cut out the shapes so that they fit snugly on the board. Then use glue to attach the pieces to the back of the mat.
• Using a metal ruler and a Xacto knife, cutting board, cut each shape.
• Put them together.

• Next, glue the bottom (shapes 2 + 4) to the base (shape 6). The triangles fit together nicely and if you did everything right, they will just fall into place.

Then use small pieces of art tape to stick them together and wait for the glue to dry completely.

TIP: Use super glue, it dries instantly (we used Aleene). Apply glue lightly, and wipe off excess.

1. After gluing the bottom half (forms 2 + 4 to the base, form 6 turn upside down (open end down), place the square on a flat surface and let it dry overnight, this will help preserve its area.
2. The next day, start working on the top of the lamp. Glue the 1 + 3 shape, leaving a little hole to insert the lamp inside. The top one (form 5) was glued along with the art tape, but it is not glued to the form 1 + 3 yet.
3. Then reinforce the seams with glue from the inside.

Then start working on the base of the lamp.

The level at the bottom of the lamp needs to be made a little larger, so cut a few 1×4 pieces to raise it a bit. Additional weight will also be added, which will give it more stability. Use screws to attach 1×4 to existing metal base. (We swapped the existing stem with one from another lamp to get it to the correct height).

Next, drill a hole for the cord and insert the plastic sleeve from the old lamp. The lamp should be disassembled, and pull the cord and wire through the threaded rod of the hole in the new base. Glue it in the center inside the lamp.

At the top (form 5), mark the center and drill a hole for the center rod. Then glue it in place.

1. After applying the adhesive, wipe off excess and, if necessary, lightly and apply a second coat after sanding.
2. Medium-grit putty and fine sandpaper, finish with a sanding block. At this point, you will notice its strong base.

When you've finished removing the dust, apply paint! To cover upper part threaded rod, use the top of the old lamp - it just slides over the rod. Then return back to the nest!

Everything, a handmade table lamp is ready.

Bottle table lamp

Tin lamp

Such a lamp is perfect for a home desktop, both for a student and a schoolboy. Boys will especially appreciate it, it looks more like a transformer and a robot from the future. You can paint or decorate the jar itself with paper, thread, or make it more embossed. How right.

Table lamp made of plastic bottles

Plastic bottles can always be found on the farm, so decorating an old table lamp is not difficult. Usually, when restoring old lamps, the bases are left and plastic is used for the lampshade. The lampshade mount is usually used the old one. When working with plastic bottles, remember that cutting them is easier paper cutter or construction knife. Glue is used for rubber or special for plastic.

Table lamp made of branches and cuts

Wood in the interior is always a classic - it is always fashionable and relevant. By decorating a table lamp with a cut of wood or an old driftwood with your own hands, you will get designer item which simply has no price.

1. To do this, we need to pick up any piece of wood we like, process it properly namely, dry it, apply impregnation from pests and cover it with varnish.
2. The second stage is to mount the top from the old floor lamp into the base. If this is not the case, it does not matter, in stores everything for light usually sells bases for lampshades.

Other original ideas

The basis for a table lamp, in principle, can serve as any object that you do not need: these are children's toys, Sewing machines, unnecessary socks and so on. Experiment and create beauty!