Burlap lampshade for floor lamp. How to make a lampshade with your own hands from fabric

Decorating the lampshade will help create a unique atmosphere of comfort in the house. In addition, it will help to give old things new life. No need to throw away old lamps and fixtures, but it is worth showing a little imagination to create a completely new one. designer thing. The decor of the lamp can be made from improvised means, creating a lamp that will harmoniously complement the interior of the room.

Decor materials

In order for a hand-made lamp to look original, you can use a wide variety of materials and fixtures to decorate it. Basic materials for work:

glue (PVA, silicate or glue gun);
twine, wire, twine;
beads, rhinestones, beads;
scissors;
pliers;
thick cardboard, sheets of white paper;
lampshade frame;
bulb holder and wire.

This is not a complete list of materials that are used to create a lampshade. In the work, you can use any improvised means and materials.

The simplest version of the base for the lampshade is the frame from the old lamp. You can use metal frames from old lamps, which are later decorated at the choice of the master. Can also be used as a base glass jars, plastic container. The frame of the product can be made of wicker or wood panels.

The light bulb holder and wire can be purchased on the market or use the remnants of an old lamp.

From papier-mâché

An interesting solution for interior design is a papier-mâché lampshade. For decoration you will need white paper, old newspapers (can be replaced with thin sheets paper), PVA glue, balloon, water. Before starting work, the ball is inflated to the size that the lamp will then be. The newspaper needs to be cut into long strips, which are briefly left in glue or paste. Wet the surface of the ball with water and lay out the first layer of newspaper. One of the parts of the ball is not sealed, since light will come from it in the future.

An unusual solution: if you do not cover the bottom of the ball with a newspaper layer, the light will be directed towards the floor. You can also leave the side of the ball free, in which case the light will come out to the side.

To create an unusual papier-mâché lamp, you will need to apply 5-6 newspaper layers. Be sure to ensure that before applying the next layer, the previous one is completely dry. After completing the layout with a newspaper, the lampshade can be pasted over with white paper, apply liquid wallpaper. After decorating the lamp, the ball needs to burst, paste over the lampshade with paper inside. Make a hole for the chamber on top of the product.

From cardboard and paper

Another decor option is a paper lamp. This requires thin cardboard in white or other colors. The length of the cardboard sheet depends on the required diameter of the finished product. The selected contour is applied to the cardboard (butterflies, hearts, stars, etc.). With the help of a clerical knife, the selected drawings are cut out of the canvas. The cardboard is glued along the edges and attached to the frame of the future lamp. Along the edge of the lampshade, you can attach ribbons or a fishing line decorated with beads, on which you can hang symbols cut out of cardboard. Such a product looks very original on the ceiling of a nursery or bedroom.

Colored beads can be strung on ribbons, which will alternate with paper figures.

After turning on a lamp with such a frame, funny figures will appear on the walls of the room.
Using fabric to decorate a lamp

Fabric lampshades are easy to make and hold up well to cleaning. as the most simple option lampshade, you can take a piece of fabric that looks harmonious with the interior of the room, and sew its edge. A cord is threaded in the upper part and that's it - the lampshade is ready. This product is attached to metal carcass and also easy to remove.

More difficult option fabric lampshade can be decorated with ruffles, weave ribbons. Lampshades trimmed with fabric ribbons or embroidered with beads and sequins look quite original.

For the decor of the living room, you can make a lampshade, decorated with fringed ribbons. Ready-made ribbons are sold in sewing stores. A hot glue gun is used to attach the fringe to the frame. Adhesive thin layer is applied to the frame of the lamp, to which the braid is subsequently attached.

If there is a need to decorate the finished lampshade to make it match the interior, various figures can be cut out of the fabric, which are attached to the lampshade with a glue gun.

From improvised items

In any home you can find a lot of items that can be used to decorate a lamp. And if you look in the garage, you can create a whole studio of designer chandeliers. The most important thing is to show imagination and approach the choice of materials for decor outside the box.

In order to fire safety you need to use objects that are resistant to high temperatures or screw in low-power light bulbs before starting work, the surface of the object must be cleaned of dust and dirt, degreased.

Choosing the style of the lampshade, it is worth considering the interior of the room, its purpose. For example, a lampshade made of plastic spoons would look strange in a living room that is decorated in a frilly glamorous style. At the same time, a lampshade decorated with rhinestones and stones will be completely out of place in the kitchen or in the summer gazebo.

From plastic spoons

This lamp is ideal for decorating the kitchen. It is very simple to make, while the materials for the lamp cost a penny. So, for work you will need the following materials:

A set of plastic spoons. A total of 50-100 pieces of fixtures will be required, depending on the desired size of the lamp.
Gun glue.
A set of acrylic paints and brushes.
Lampshade frame. For work will do finished metal frame from an old desktop floor lamp.
Scissors.

First, you need to cut off the holder from all the spoons. For each product, you must leave 0.5 cm of the boat for fastening. Further, parts of the spoon are randomly attached to the frame. They can overlap each other, imitating fish scales, or scatter, resembling rose petals. Spoon legs can also be used for decoration. After covering the entire surface of the frame, the surface of the spoon is covered with acrylic paint - plain or multi-colored. Using this decor technique, you can create a lamp in the form of a pineapple, a flower, a goldfish and others. A lampshade made of plastic spoons is suitable not only for ceiling lamp, but also to decorate the bedside lamp in the nursery.

From plastic or glassware

Water bottles often accumulate on the farm, which can be used to decorate lamps. Before starting work, the bottle must be thoroughly washed and dried. Further actions are the freedom of the master's imagination.

For example, by cutting off the neck of a bottle, you can create an excellent holder for a light bulb holder. Several of these accessories, which are glued together, form an unusual chandelier. Bottles can be used from multi-colored plastic or coated with a transparent colored varnish. So, multi-colored rays of light will sparkle in the room.

To create a lampshade, you can also use glass pickle jars. Hanging on different levels lamps from cans will become interesting design decision in the design of the kitchen. Also, when arranging the kitchen, you can use saucers, cups, fragments from broken dishes to decorate the lampshade.

From twine

Such lamps can often be found as lanterns on the streets or on terraces. Making such a lamp at home is very simple - twine and glue are used to create it.

Before starting work, as in the case of a papier-mâché lampshade, you need to inflate a balloon of the desired size. It is he who will serve as a form for the future product. The string must be soaked in a paste and wound around the ball in random order. The free edges of the twine are tied, while the knot must be placed at the top of the ball, where the chamber will then be located. The product will dry for about 2-3 days. Then the ball needs to burst and you can attach the chamber and the light bulb. The finished product can be decorated with large beads, dried flowers. To decorate the gazebo, you can use several of these lampshades of different sizes.

Thus, there are many options for creating an original lampshade. In work, you can use not only special equipment, but also improvised items. The manufacture and decoration of the lampshade will allow not only to decorate the house, but also to have a great time.

If a person loves creative experiments and wants to spend a day off with benefit, you can make a new beautiful lampshade.

This craft will decorate your home. And only at first glance it seems that it is too expensive to make lampshades for table lamps with your own hands. There are ready-made proven schemes with dimensions. All you need is some wire, fabric and thread (or fabric glue). This is easy to do, and simple improvised materials are suitable for crafts. Such an element of the interior as a lampshade will bring a new motive to the usual interior of the room or will be a wonderful gift for acquaintances and friends.

How to make a lampshade for a table lamp with your own hands?

What is a living room without a beautiful lampshade? Masters of handmade art have in their arsenal a lot of advice on how to create a beautiful lampshade for an old lamp from the time of your grandmother's youth. The most practical option is to make a round lampshade frame for table lamp from wire. And stretch the fabric over the wire and fasten it.

There are ready-made proven schemes with dimensions. By doing everything according to the instructions, a beginner will avoid many mistakes. Let's give an example of the most common classic lampshade frame scheme. We also make a pattern for fabric according to these sizes, but with an allowance.

The best fabric for a lampshade is felt or cotton. Felt allows you to make a multilayer unusual craft. And on plain cotton, before fixing the fabric on the frame, you can apply a pattern with an iron. To fix the fabric correctly and evenly, it is convenient to use transparent textile glue. You can easily find it in a decoupage store. The result is an excellent lamp.

How is the drawing applied? There is no special trick in this either. You need to find special paper for thermal transfer of photos. A suitable pattern is printed on it, and then you need to take a heated iron and iron every millimeter of paper well. Nothing more needs to be done. When the pattern cools down, the fabric is securely fixed to the frame. Just do not forget to make a small gap when cutting out fabric patches so that the edges (top and bottom) can be folded and carefully glued from the inside. Or use ordinary colored tape for these purposes.

Frame options

DIY lampshades for table lamps are in any case nicer than bought factory ones. Everything that the author's imagination is enough for is possible. But for a round shape, it is easiest to choose a pattern that is glued to the fabric.

If you don’t want to mess around with drawings, it’s enough to take an ordinary plain chintz fabric and make patterns suitable for the shape of the wire frame. The main elements of crafts are fantasy and the ability to work with your hands. Therefore, the wire frame of the lampshade for a table lamp is made by anyone with your own hands.

Unusual lamps for a new interior

When in new room renovated, and I want to complement the image of the living room with some exclusive detail, you can put one lamp with unusual design to a small coffee table. Or on the dressing table in the bedroom. This will be an excellent solution. After all, even when decor costs are minimal, creative taste is always appreciated.

To find unusual ideas for a lamp, and, in particular, a new lampshade, you can at exhibitions of handicrafts, or simply by applying maximum imagination. Now popular various shapes rice paper lampshades. Many people love colored things and decorate the frame with decorative colored beads.

The main thing in creative experiments is to choose the right shade of small decor elements. When the right style, color scheme and shape are chosen, even the simplest things will look elegant in your room.

Stylish cardboard lampshade

You can make a lampshade for a table lamp with your own hands from cardboard. It will be completely different from others. The material for crafts needs to be selected durable, but thin. The advantage of this option is that it is an incredibly easy way to create a lampshade from scratch.

The sequence of actions is as follows:

4 identical frames are cut out of cardboard. The same frames in which they put photos.
A piece of fabric is glued to the back of each frame.
On the side, carefully make a few holes with a gypsy needle and sew the frames with laces. You need to get a small flashlight. The cardboard is pre-glued. It is stitched in order to make the craft look more beautiful.

The advantage of this option is that it is a completely simple way to create a lampshade from scratch. In addition, this "flashlight" is a very light object. And it is possible to repaint it in any color, but it is desirable to match the selected fabric. It looks unusual and fits in style for elegant interiors.

DIY lampshades for table lamps for a nursery

An interesting lamp in the nursery will be very useful. Make a better lampshade for your child together. Trust his personal taste. After all, the main thing for a child is the process, not the result. You can use denser materials that do not transmit light well, such as plastic pasted over with paper. With a lampshade-cap made of plastic, the lamp dimly illuminates the room, it acts as a night light.

Maybe the child will want to see their favorite cartoon character on such a night light. Using the cotton print idea, this can be done.

Lampshade for a cozy bedroom

But for the women's bedroom, a lampshade with a knitted pattern is more suitable. Some stores sell simple knitted doilies as decorations for tables or shelves. These wipes are great. If a woman knows how to crochet, she can make such a napkin herself.

When the napkins need to be shaped into a ball, you need to put a few pieces on a baby ball, cover them completely with glue and let them dry a little. Remove unnecessary details in advance. Then the fabric is removed and hung on a prepared circle of wire lampshade.

A self-knitted napkin already has the desired size in advance, it does not need to be adjusted to the size of the frame. The napkin is sewn to the edge of the frame with ordinary threads. Making a do-it-yourself lampshade for a table lamp with a crochet is as easy as shelling pears.

A ball of thread as a lampshade

A very popular method is a glued ball of thin threads. All you need is a skein of thread, PVA glue and balloon. Threads can be taken and thick.

What to do?

A balloon is inflated, smeared with glue.
On fresh glue on the ball, layer by layer, wind the threads in any order.
At the bottom there is a place so that you can then twist the light bulb.
When a ball is obtained, a layer of PVA is again smeared on top of the thread chaos.
This ball is left to dry for 12 hours.

After that, the balloon is pierced with a needle and pulled out. Now the lampshade is ready to be installed on the lamp. Do-it-yourself lampshades for table lamps made using this technique do not have to be round. Instead of a ball, it is convenient to take a plastic 5-liter bottle or other square-shaped object, and apply the same "scheme". You get a wonderful lampshade if you take an inverted plastic flower pot instead of a shape.

New life for an old lampshade

What to do when there are lamps with a lampshade, but the old glass cover is broken? How to repair the lampshade of a table lamp with your own hands? Sometimes you don’t want to say goodbye to old favorite things, even though they age and fade with time. What can be done to keep them going? They can be ennobled, return to them a beautiful stylish look. But how to update the lampshade of a table lamp with your own hands?

Of course, the old frame must be repainted, repaired if it cracked somewhere. Now many types of glue for the restoration of such things are sold.

Then consider what base you will choose for your craft. If you are new to handmade, ask someone more familiar with the details of this hobby for advice. But still the best basis for the lampshade there will be a classic fabric.

Update a lampshade for a floor lamp with your own hands, make a new one or repair an old one good idea to give a fresh gloss, a new mood to your home.

How can you make a lampshade for a floor lamp with your own hands, if the old one is worn out or no longer corresponds to the new time or the new tastes of the owners.

Everyone loves floor lamps. This is the most versatile light source. It is so comfortable to sit under it with knitting or a book, it can be moved, it is mobile and is an interior decoration. Therefore, the decor of the floor lamp so attracts the eyes of needlewomen.

Many lamps are inherited from previous generations, and, perhaps, at first, they push it somewhere, but then the aura of old household items becomes attractive. There is a desire to repair the old floor lamp, update the lampshade and all this at home.

This is a good idea, now there are so many ideas around and the possibilities for their implementation that it is simply embarrassing to sit idly by. To arrange a hauling lampshade on an old frame or to remake a floor lamp is completely up to you, the process will be exciting in any case.

Lampshade frame

From wire disposable hangers

Using pliers, unroll and straighten wire from disposable dry cleaners hangers.

Using a ruler and wire cutters, cut two pieces of straightened wire desired length. The length is equal to the length of the perimeter of the floor lamp shade

Use pliers to make a circle with each hook and loop wire to hold the circle together

Measure and cut two pieces of straight wire equal to the height of the lampshade + hem allowance for the hinges

Bend loops at both ends of these wires, use a round stick and pliers

Slip the loop at one end over the circle and pull off, and the loop at the other end over the other circle. Do the same with your own hands with the second wire. To secure the frame structure.

Glue the loops. Adhesive for metal « Cold welding”, “Epoxilin”, “Superglue”.

Cut 4 pieces of wire to size equal to the radius circle minus the radius of the small circle for the light bulb, plus hem allowances for the hook. You can calculate the radius from a known circumference using a formula known from school, or you can use online calculator at allcalc.ru/node/783

Make a small circle for the light bulb with your hands from a piece of wire a little longer than the circumference of the light bulb socket plus an allowance for the hook. Connect the wire into a ring and glue the ends

Attach all 4 needles to the big circle and to the small one.

wire mesh

For a floor lamp you will need 2m of mesh 40cm wide

How to sew a fabric lampshade video

What can be made

Do better with what you know how to do. If you knit well, show off the knitter's talent, if you embroider boldly embroider a plot that beckons you. The main thing is to do it yourself. Your guests will gasp with delight and admiration.

Fabric lampshade

A very convenient option if you need to update or repair with your own hands at home. And it happens that the furniture has been updated and you need to change the colors of the accessories. Or, finally, the most beautiful embroidery is finished and it turned out to be appropriate for a floor lamp. Padding saves in many cases, see detailed wizard class on the site.

You can make a lampshade for a floor lamp or a table lamp in minutes, or you can create a masterpiece from the world of lampshades with your own hands for weeks.

Master class fabric lampshade. Master class fabric lampshade with paper pattern

Lampshade in macrame technique

A macrame lampshade can be found even on the street, as an attractive advertisement for a store or a cozy cafe.

Thread lampshade

Surprisingly, threads have been used for this purpose for several decades. The threads create a particularly cozy look, whether they are tightly attached to each other or scattered in sparse, light, elegant weaves.

Choose threads for harmonious combination with room interior
Use dense, thin threads, they hold their shape and color better. Loose gain glue and become faded.
Before winding the threads, evenly grease the ball with petroleum jelly
Use transparent glue that becomes glassy when it dries.

For a black lampshade, we took a skein of black satin thread and 2m of strong black braid.

crochet lampshade

Crocheted lampshades look incredibly cute and cozy at the same time, and at the same time can be exquisitely stylish. Create an exclusive thing with your own hands. Even for beginner knitters, crocheting in a circle is a simple thing. And for experienced needlewomen, a whole expanse of ideas is more complicated.

A lovely lampshade for a flat kitchen lampshade is crocheted according to the scheme. The diagram is attached below.

Wooden lampshade

Wooden lampshades are made from slats or from a single piece of wood. The mind-blowing video shook my imagination.

Video how to make a floor lamp from a log with your own hands

A selection of photos for inspiration and pleasure

Ideas used in the article:

lazuli-handmade.nl, http://marrietta.ru, arxip.com

Always with you, It's beautiful here.

Every housewife wants to make her house extraordinarily beautiful. Some arrange it in some unusual style, for example, provence, country or minimalism. Someone is trying to decorate with decorative elements. Others focus on one element, for example, a lampshade or a ceiling.

Consider the options for how to make a do-it-yourself ceiling lamp for a chandelier. To do this, you will need not some rare, but ordinary improvised means.

Option number 1: paper

The easiest way is to make an original paper lampshade. Such a decor element can have any shape. It will harmoniously fit almost any interior - in the kitchen, in the living room, in the nursery. It is worth remembering that the life of a paper lampshade for a lamp depends on the quality of the paper. It should not be too thin, but at the same time light-transmitting.

The easiest way is to consider how to make a lampshade with your own hands from the wallpaper left over from the repair. Consider how to make a product in the form of an accordion. The workflow does not take much time and does not require any special skills, abilities or schemes. From the wallpaper you can make a lampshade for a floor lamp with your own hands, for a table lamp or sconce:

First you need to prepare the material - a piece of wallpaper 1.5 m long and approximately 30 cm wide.
Mark the ribs with a pencil or pen.
Carefully form an accordion. The width of each rib should not exceed 3 cm.
Using a hole punch, make holes in the accordion.
Pass a decorative cord through the holes and glue the lampshade along the side seam.

Even a child can make such a product on their own.

In the process, instead of wallpaper, you can use rice paper. With it, you can update the old lampshade. Wrapped with such paper, it will look stylish and modern. You can decorate the product with the help of such decorative elements as special stamps, stickers, etc.

Do-it-yourself paper lampshades will decorate any interior in style. The main thing is to choose the right color scheme and form.

Option number 2: rope

A do-it-yourself lampshade made of rope will look original. It can be used to decorate any lamp: sconces, floor lamps and others.

First you need to prepare necessary tools and materials:

20 meters of rope;
1 balloon for the base;
PVA glue;
white paint (preferably in a spray can);
duct tape;
gloves (ordinary household or medical);
weaving device (special board or perfume box).

It is quite easy to make such a lampshade with your own hands:

Using a weaving board, make a decorative ribbon out of the rope. Its lines can be smooth or curved - as your fantasy tells you.
Now you need to glue the balloon filled with air with tape.
Taking the top of the ball as a reference point, lay the rope in smooth turns. At the same time lubricate it with glue.
Remove the cover from the lamp. Color it in White color. Put on a finished lampshade from above.
Paste the ball completely and grease with glue again.
Poke the ball with a needle and pull it out. After that, a form woven from a rope will remain.

A do-it-yourself twine, twine or rope lampshade is suitable for a table lamp, sconce or floor lamp. Under it, it is recommended to use an LED lamp, which will not heat up such a ceiling very much.

Option number 3: threads

Another option is a do-it-yourself lampshade made of threads. Self-made chandeliers from threads look very original. They attract attention and fit perfectly into any interior.

You will need:

balloon;
cotton threads of one or more colors;
250 ml of PVA glue;
suspension cord;
Powersave lamp;
scissors;
large needle;
oilcloth or plastic the size of an A3 sheet;
petrolatum;
tassel;
cotton pad and stick.

The process of making a lampshade for a table lamp, sconce, chandelier or floor lamp from threads with your own hands consists of several stages:

Blow up the ball. It is desirable that its size be from 25 cm.
Lubricate its surface with Vaseline.
Cover the work surface with paper or oilcloth.
Closer to the bottom of the tube with glue, pierce a hole.
Wrap the ball with threads in any order.
Lubricate the threads with glue. Leave to dry completely overnight.
Using a cotton swab, separate the balloon, deflate and pull it out.
In the upper part of the finished product, make a hole for the lamp and cartridge.
Insert the lamp inside. Fix the holder for the cartridge in the hole.

Now just hang the finished lampshade in the place intended for it.

Option number 4: lace

You can try to make a lampshade out of lace with your own hands. From this material you can make a lampshade for an old table lamp with your own hands, for a wall lamp or a floor lamp.

Work begins with the preparation of the things necessary for work. This is actually lace, PVA glue with a brush, a balloon and electrical elements for the lamp.

Stages of work:

The first stage is the preparation of lace. It is necessary to cut several circles of different sizes.
Blow up the ball. Lubricate its surface with glue.
Attach lace circles to the ball. It needs to be done with a twist.
Leave the product until completely dry. This will take about a day.
Pop the balloon and pull it out.
Fasten the socket, lamp and wires. It is recommended to use low power lamps that will not heat up the lace.

Option number 5: macrame

lovers original elements decor will undoubtedly pay attention to the macramé lampshade.

To make macrame lampshades with your own hands, you need to prepare:

172 m of 3 mm thick cord;
metal tubes and rings for the frame;
8 rings with a diameter of 7.5 cm;
1 ring with a diameter of 17 cm;
1 ring with a diameter of 36 cm.

How to make a frame for a lampshade with your own hands? We connect together two rings (17 and 36 cm in diameter) and 8 metal tubes 27 cm long.

The workflow for making the plafond itself looks something like this:

It is necessary to cut 40 threads of 3.5 m each from the cord. Attach them to the top ring.
Using patterns for macrame, weave an openwork mesh.
Insert 8 rings along the bottom edge, braiding them with a thread.
Also braid all the vertical tubes of the frame.
Decorate the bottom edge with decorative elements.

Before you make lampshades with your own hands, you can watch master classes. They will help you master the basic elements of macrame weaving and avoid mistakes in the workflow.

Option number 6: fabric

A fabric lampshade will also look great. With the help of fabric, you can update or restore an old product. It is enough just to cover it with prepared material and decorate it with any suitable elements decor. A fabric lampshade based on cardboard is suitable for a table lamp, sconce, infrared lamp, night light and even chandeliers.

To make the product neat, it is necessary, before being fitted, sheathed on sewing machine. In addition to it, you need to prepare:

iron;
pencil;
ruler;
the cloth;
pins;
matching color threads;
thick paper (thin cardboard or whatman paper);
universal glue.

The workflow consists of several steps:

Make a pattern out of paper desired shape. It is important that it fits the frame.
Connect the template to the fabric using pins. Circle it with a pencil. Draw another line 2 cm from the template line.
Wrap the allowances inward, gradually detaching the pins. Mark the fold line with them.
Remove template.
Sew the fabric on the machine.
Iron the fabric well.
In a well-ventilated area, lay out the workpiece and grease it with glue. Let dry a little.
Glue the fabric to the frame. All seams and cuts must be hidden.
Let the lampshade dry. You can use it after a day.

A fabric lampshade, decorated, for example, with flowers, buttons, bows, will look good. Instead of regular fabric, you can use organza.

Option number 7: tree

Separately, it is worth mentioning the lampshade in the steam room, sauna or in the bath with your own hands, because here high humidity, and the adhesive may no longer hold the shape of the product. For making with your own hands from improvised materials, wooden materials are most popular.

To make a wooden lampshade for a steam room with your own hands, you need to take:

paper;
pencil;
wood;
sandpaper for grinding;
self-tapping screws.

With this set of tools and materials, you can make a corner lampshade:

On paper, draw a template for the bottom of the frame. It should be in the shape of a trapezoid. It is important that its sides fit the walls of the bath.
Using a pencil, transfer the drawing to the prepared wood. Cut out.
Sand with sandpaper.
Cut out 3 strips with a width of 1 cm and a thickness of 0.5 cm. The height should be equal to the height of the lamp.
These strips will connect the top and bottom of the frame. They need to be nailed on the sides and in the center.
After measuring the distance from the center to the edges, cut a few more strips of the same size.
Fasten the strips with self-tapping screws from the inside of the lamp. You can fix them in any position.

As you can see, there are many options for making lampshades with your own hands. In addition to those listed, there are also products made of wire, knitted, lampshade made of beads and many others. In the process of work, almost any material that is at hand is used. If necessary, you can make a new product, or you can update the old one (do restoration). Almost always, a scheme or template is required to work. It is important that the workpiece exactly matches them. Only in this case ready product will become a real decoration of the house or apartment.

lampshades

An organza lampshade looks simply amazing, and you don’t need to water such a flower.

Materials and tools:
. Marsh Gold Organza and turquoise color
. Golden green beads
. golden wire
. Aerosol acrylic paint golden color
. Lamp
. Glue
. Pliers
. wire cutters

1. We cut out 40 petals along an oblique line from an organza of two colors.
2. We fold the petals of two colors in pairs and step back from the edge of 0.5 cm. We sew with a zigzag seam with stitches 2 cm wide. Cut off the excess fabric. Lightly pull along the seam of each petal so that the edges are wavy.
3. We cut the wire into 20 segments 10 cm long and fasten at their ends along the bead. We collect blanks in a bundle. We twist the ends of the wire so that a flat leg is obtained. These will be takedowns.
4. Cut off a wire 35 cm long and string 50 beads on it. We bend so that there are 30 beads on one end and 20 beads on the other.
5. Using glue, we fix the petals on the lampshade so that we get a flower.
6. We attach the stamens and a long wire, imitating brushes.
7. Paint the lampshade leg with gold paint.
"Handmade"

making such a lampshade

An ordinary lampshade under an elegant cover looks completely new. Most suitable fabrics- light, rigid and transparent. Choose such tones so that a warm, caressing light emanates from the lamp, good mood create white, cream and pink shades. You can successfully use the old lampshade. For an ugly frame, take an opaque fabric - taffeta, light silk or thin cotton. If you like the color of the lampshade, let the design show through the transparent cover.

Curly lampshades
According to this method, the lower cover and the gathered upper cover are sewn separately, which are held on by an elastic band. The lining is put on the lamp and the upper edge of the lampshade, and the outer cover is attached a little lower, while the junction is hidden under a wide ribbon. Decorate the cover with a silk ribbon, light braid, emphasize its narrowed part with a bow, rosette or silk flower - this is a convenient occasion to practice with decorations. You will need: Concave frame or lampshade. Centimeter, ruler, pencil and scissors. Paper. Textile. Threads. Elastic band 6 mm wide. 2 safety pins. Tape 50 mm wide.

Measurements. Measure the lower circumference (A) with a centimeter, add 4 cm for the seam. Measure the length of the side (B), add 8 cm to the drawstring for the elastic. Determine the height of the outer cover (C) and add 1.5 cm for the hem. Write down your measurements.

Calculation of fabric consumption. By measured standards taking into account the allowances for the seams, draw a rectangle AxB on paper. Draw a second rectangle, taking into account the gathering allowance Cx2A. Determine the fabric consumption from the pattern - you need to cut one rectangle of each size.

Open. Poke the pattern onto the fabric with pins along the lengthwise and cut out the outer cover and lining.

Stitching lining and cover. Stitch the short sections of the lining with a French stitch. On open sections, stitch the drawstrings, tucking them first by 3 mm, then by 12 mm. On each drawstring, leave unsewn sections to thread the elastic. French stitch the short sections of the outer cover. Turn one long edge 3mm over and stitch. Tuck it in again by 3mm and stitch again.

Lining fit. Thread the elastic bands into the drawstrings, fasten the ends with pins. Put the cover on the lampshade, tighten the elastic bands so that the cover fits the lampshade. Trim the ends of the elastic bands and sew them together. Sew the drawstrings with a hidden seam.

How to measure the elastic band for the outer cover. Wrap the rubber band around the lampshade at the level of the top edge of the cover. Stretch the elastic band slightly so that the cover fits snugly. Cut off the elastic and sew the ends.

Attaching a rubber band. Fold the elastic in four, mark the folds with pins. Fold the cover in the same way and mark the folds. Pin the elastic to the upper edge of the cover from the wrong side, matching the marks. Stretching the elastic and gathering the cover in folds, stitch the elastic in a zigzag pattern.

Finishing. Place the outer cover over the lining already placed on the lampshade. Tie a ribbon around the constriction to cover the line where the covers join, and secure with a few stitches. Decorate the lampshade with a bow, rosette or flower.

Lampshade - "coolie"
For a conical lampshade, you can also sew a cover. Here are the instructions for sewing the flowered sheer fabric lampshade cover mentioned above. Such a cover is simply glued to a small white conical lampshade. If you do not have an old lamp that can be refurbished, pick up an inexpensive lampshade that matches the color in the store. You will need: Tapered lampshade. Centimeter, ruler, pencil, scissors. Newspaper. Threads. Tape 35 mm wide for tying the top and for the bow. Glue universal.

Measurements. Measure the bottom edge of the lampshade (A), add 4 cm for the seam. Measure side (B), add 6 mm. Draw a 2AxB rectangle on paper, taking into account the seam allowances and calculate the fabric consumption.

Open. Cut out a rectangle of fabric according to the pattern along the share. Sew short sections with a French seam.

Hem. Fold one end in 3mm and topstitch. Tuck the edge 3mm again and stitch again.

Trimming the top edge. Fold the cover in four, mark the folds with pins. Sew along the top edge twice, starting and ending at the pins. Mark four equal sections on the top edge of the lampshade with a pencil. Put the cover on the lampshade and, matching the marks, adjust it to fit the size. Spread the gathers evenly, fasten the threads and remove the cover.

Top binding. Cut the ribbon so that it covers the top edge, add 1.5 cm to sew the ends with an overlap. Fold the tape over the gathered edge, tuck one edge, attach the tape. Sew the tape to the edge, grabbing both sides and gathers into the seam.

Finishing. Put the cover on the lampshade, glue universal glue in several places. Tie the remaining ribbon in a bow at the glued area to hide it.

Advice. Tulle lampshade. To cover from thin and soft tissue better kept on the lampshade, it can be strengthened with a stiff tulle lining. Measure the distance from the edge of the lampshade on one side to the edge on the opposite side through the top. Cut a circle of this diameter from tulle. Drape it symmetrically on the lampshade and cut out a circle to cover the top. Sew the cover as above, but baste the lining before you tape the top edge.

The color of the lampshade under a transparent cover with a small frill at the top harmonizes perfectly with the decor of the room. Sew a cover, as for a conical lampshade. Close the gathering seam with a ribbon with a bow or a garland of roses.

Types of lampshades
Making a lampshade with your own hands is not difficult at all - this is good way save.

Table lamps and pendant lights play a prominent role in the interior. These are not just light sources in the house, but also important elements decor. You can reduce spending on decor and choose the perfect lamp if you make a lampshade with your own hands.

What you need to make a lampshade
Kits for most of our models are commercially available. But if you don't have a lampshade unusual shape, can be found in thrift store the original old model, which you will decorate to your liking.

Frames. The frame consists of upper and lower rings connected by uprights and a lampshade base. The rings and the shape of the uprights determine the type of lampshade. For example, in a lampshade in the form of a cylinder, the diameters of the upper and lower rings are the same. Rings are connected straight uprights. The elegant "concave empire" lampshade has an upper ring smaller than the lower one and the pillars are gently curved inward.

Materials. To make and fit the frame, you will need: A strong, tightly woven cotton ribbon that is wrapped around the frame so that the lampshade can be sewn on. Self-adhesive paper tape if the lampshade will not be sewn on. Enamel for painting a metal frame.

Textile. When choosing fabric for a lampshade, follow the rules: Look through the fabric at the lamp and check how it transmits light. For a lampshade without lining, you need dense fabric, which will hide the outlines of the lamp and pillars. If the contours are visible through the lampshade, make a lining. The fabric sets off the light of the lamp. For example, blue and green lampshades give a cold light, red and yellow - a warm reflection.

Fittings. Attachments for lamp fittings are attached to each frame. Usually, the lampshade of a table lamp is attached to its stand by a suspension ring with spacers or to a special frame that rests directly on the armature; small “candle” lamps have clips that hold the lampshade. Lampshades hanging lamps hung on a rebar.

Parchment paper for a smooth lampshade. Self-adhesive PVC sheet is a rigid polyvinyl chloride sheet to which fabric or other material can be glued. decorative trim, which is glued or sewn to mask the joints and trim the lampshade.

A dark heavy fabric lampshade lets in light from above and below and creates a directed stream of light.

A thick fabric is not suitable for a pleated lampshade. On the expanding lampshade, the pattern is more distinct at the bottom. Check how the folded piece of fabric looks.

For a curly lampshade, soft, easily draped fabrics are needed. The pattern of the fabric should fit nicely diagonally.

Frame manufacturing
Before covering the frame of the lampshade with fabric, it must be prepared depending on the type of frame and the fitting material. For example, if you are making a cardboard hood on a plastic-coated frame, no preparation is required. The metal frame should first be painted with white enamel so that it does not rust. The old frame needs to be cleaned sandpaper. If you will sew the lampshade to the frame, then you must first paint the frame and wrap it with tape, after which you can sew on the cover.

Frame painting. If the metal frame is not covered with PVC, it should be painted. Remove rust marks with sandpaper. Sand the frame so that bumps and protrusions do not damage the fabric. Paint the uprights and rings with white enamel, but don't touch the center ring.

Frame wrapping. If the frame is covered only with fabric, then you need to wrap it with cotton tape. Do not wrap suspension and fittings ceiling lamp. To calculate the amount of webbing, measure the length of each post and the circumference of each ring and multiply by 3. This will be the total length of the webbing. If a white ribbon shows through the dark fabric, paint the ribbon to match the color of the lampshade.

Rack wrap. Cut strips of tape 3 times the length of the stand. Start work from the top end of the rack. Wrap the end of the ribbon around the ring, then around the post to secure the end. With light tension on the tape, wrap the upright in a spiral from top to bottom so that each turn covers and holds the previous one. The finished winding must not move.

Winding fastening. When you reach the bottom of the rack, wrap the braid around the ring, thread the end into the last turn to make a knot. Tighten the braid tightly and leave a free end. Wrap all the racks in this way, except for one.

Wrapping the top ring. Measure the circumference of the top and bottom rings and the height of the last unwrapped post. Cut the string to the given length. Roll up the tape and secure with a rubber ring, leaving a free end of 20 cm. Hold the end of the tape in front of the top ring at the unwrapped rack. Pass the ribbon over the ring over the free end, secure the end.

Completion of work. Wrap the top ring, wrap the braid around each rack with a “figure of eight”. Having reached the unwrapped rack, secure it with a “figure of eight” and wrap it from top to bottom. Make a figure eight at the bottom and wrap the bottom ring. On each rack, cut the ends of the braid to 1 cm and hide them under the wound “eight” braid. When finished winding, cut all ends of the braid to 6 mm, tuck and sew by hand.

How to choose a base stand
The lampshade and the stand-base of the lamp must form a single whole. There are a few principles to keep in mind when choosing a base stand and lampshade. The lampshade should completely cover the fittings, but not the lamp stand-base. The bottom diameter of the lampshade should be twice as wide as the wide space base racks. The height of the lampshade should be 1-2 times the height of a round or vase-shaped base stand. The height of the lampshade for the stand-base and candle should be 1/3 of the height of the stand.

home > ISO classifier