DIY creative ideas for your home. DIY design: ideas for your home that are easy to implement

If you have a couple of evenings to spare, then why not start making crafts for the kitchen and home? After all, with their own hands from improvised, natural and even waste materials you can create a bunch of useful or just beautiful little things. In this article, we presented 50 inspiring photos and 12 super ideas with step by step master classes for the manufacture of decor items, storage accessories, kitchen utensils and more.

Idea 1. Cutting board tablet holder

Watching your favorite TV shows on a tablet or peeking into a recipe book while cooking will become easier if you make a special stand for this from ... an ordinary cutting board. Making this DIY kitchen craft will take no more than two hours, and it will be used every day.

To make a holder for a recipe book or tablet you will need:

• You can either use an old cutting board or buy a new one (wooden is best, but bamboo works too). Its size should not be much larger or smaller than the tablet.
• A small wooden plank, or better a molding fragment (it will hold the tablet / book).

• Another block of wood or plywood from which you can cut a sharp triangle;
• Paint or stain in the desired color, for example, to match countertops, fronts or kitchen apron ;
• Brush for painting or rags for staining;
• Jigsaw or saw;
• Wood glue or any other strong adhesive.

Instruction:

1. Using a saw or jigsaw, shorten your plank or molding to the desired size (according to the width of the board), sand the edges sandpaper, then just stick on the bottom of the board.

1. Cut out a piece of wood to support the stand in the shape of an acute triangle with a right angle as in the photo below and glue it too.

The angle of inclination of the holder will depend on the inclination of the hypotenuse of the triangular bar

1. Paint the entire piece following the paint manufacturer's instructions and leave to dry.

1. If desired, the handle of the resulting stand can be decorated with a jute rope or ribbon. Thus, when the stand is not needed, you can hang it on a hook.

Also, the craft can be further decorated - for example, artificially age as in this master class, draw inscriptions, burn out the drawing, cover with slate paint. In the next selection of photos, you can get decor ideas for original cutting boards.

Idea 2. Jute coasters

If your kitchen (or, for example, a country or summer kitchen) is decorated in a rustic, mediterranean, rustic or nautical style, then you will surely love this kitchen craft idea. In just a couple of hours, you can make coasters for plates for the whole family and guests with your own hands.

To make one substrate with a diameter of 33 cm, you will need:

• 10 meters of jute rope 1 cm thick (sold in hardware and hardware stores);
• Hot glue gun;
• Scissors.

Instruction:

Just start twisting the rope in a circle, alternately smearing with glue small areas and fixing them for a while. When the mat is formed, cut the end of the rope and glue it.

Idea 3. Organizer for cutlery and kitchen appliances from cans

Tin cans cost nothing, but they are durable, easy to care for, and their shape is just right for storing all kinds of spatulas, ladles, forks, spoons and other utensils. With a little effort and creativity, you can make a convenient and pretty organizer out of them, which, if it doesn’t fit into the interior of the city kitchen, will definitely take root in the country. And a do-it-yourself organizer made from cans can be used to store tools, brushes, felt-tip pens and other small things.

Stand for spoons and forks from cans

To make such a stand for spoons and forks, you will need:

• 4 or 6 clean and dried cans without lids and burrs;
• Acrylic paint for metal or enamel paint (it will protect the cans from rust);
• A few wood screws and a screwdriver;
• Thick nail and hammer;
• Furniture handle or leather strap with fittings;
• A small wooden board.

Instruction:

1. Paint the jars inside and out and let them dry for one day.
2. If necessary, saw the wooden plank to the desired size, sand, clean and finally paint (not necessarily the same color as the cans).
3. Take a nail and a hammer and make a hole for a self-tapping screw in all the jars.

Tip: To facilitate this process and not damage the paint layer, place a small bar on the table with a clamp, then wrap the bar with felt and only then put a jar on the bar (see the picture in the next photo collage in the lower left corner)

1. Attach the jars to the plank and align them as they will be mounted later. Mark the holes on the board with a pencil.
2. Punch small holes in the board at the marks using a hammer and nail.

1. Screw a self-tapping screw into the hole in the first can to attach it to the plank. Repeat the procedure with all remaining banks.
2. Finally install on the butt wooden board furniture handle or leather strap using the same self-tapping screws. Ready!

Here are a few other deco ideas and design modifications for cans.

Idea 4. Topiary for kitchen or home decor

Topiary is a small decorative tree that decorates a dining room or coffee table, chest of drawers or mantelpiece. Also, a topiary is a great addition to a gift, especially if you decorate its crown with, say, sweets or flowers. Making such crafts with your own hands does not take much time, does not require the use of expensive materials, and even beginners can do it. Having mastered basic principle, you will be able to create topiary for any occasion, any shape and design. Take a look at our selection of DIY home decor photo ideas, you will surely like something!

Halloween Kitchen Decor Idea

To make crafts you will need:

• Styrofoam, plastic or floral foam base in the form of a ball or other desired shape;
• Trunk (a smooth branch of a tree, a pencil or any other small stick);
• Decorative elements for creating a crown: coffee beans, artificial flowers, cones, colored beans, etc.;
• Decor to mask the pot filler, such as moss, pebbles or sisal fiber;
• Flower pot;
• Filler for the pot, which will fix the trunk. For example, cement mortar is suitable, all the same polystyrene or alabaster (the best option);
• Hot glue gun;
• If necessary, you will need paint to decorate the trunk, base or pot. Also, the trunk can be decorated with ribbon or twine.

Basic instruction:

1. To begin with, it is desirable to paint the base in the color of the crown elements so that possible bald spots are not noticeable. You can also paint the trunk and pot and leave them to dry.
2. Cut a hole at the base of the crown for the trunk a couple of centimeters deep, fill it with glue and fix the trunk.
3. Take the base of the crown and start gluing the decorative details one by one. The principle of operation at this stage is simple: first, large parts are glued, then medium ones, and finally, small elements fill in the bald spots. You need to glue the decor quickly, until the glue is absorbed into the base.
4. Dilute the stem fixing mixture in the pot according to the manufacturer's instructions and fill the pot with it, not reaching a couple of centimeters from the edge. Next, insert the barrel, hold it for a while and then leave it to dry for a day.
5. Mask the filling of the pot with a decorative "cover" (you can fix it a little with glue).

Idea 5. Serving board-tray

But the idea of ​​​​an unusual serving board-tray, which, although not a cutting board (intended for laying out products only in dishes), can nevertheless be very functional. For example, it can be used for beautiful presentation to the table of snacks for drinks (olives, pistachios, nuts, chips, etc.), sauces, honey, sour cream, jam. Thanks to the slate part, while the board is not used for its intended purpose, it can simply be hung on the wall and used for writing.

To make this DIY kitchen craft, you will need:

• Wooden board 5 cm thick;
• Stain of the desired color (for example, to match the countertop);
• Sponge, rag or brush;
• Slate paint;
• Two furniture handles and wood screws for their fastening;
• Jigsaw or saw;
• Screwdriver or screwdriver;
• Ruler, pencil.

Instruction:

1. Cut your board to the desired size with a hand/electric saw or jigsaw. AT this master class the board is 60 cm long, but you can make it shorter or longer.
2. Paint your board with stain according to the manufacturer's instructions and let dry.

1. It's time to paint the inside. To do this, first glue masking tape around the edges of the board to limit the painting area. Next, apply slate paint (in this case, paint in a can) and let it dry.

1. Screw the handles around the edges of the board.

You can replace furniture handles with leather straps, paint the board in bright color, burn a picture on it or attach two “legs” to its reverse side.

Idea 6. Stand for mugs and glasses

If you're the type of person who collects wine corks (whether for fun or in the hope of making something useful out of them someday), then you'll love this craft idea.

To make one coaster you will need:

• 8 corks (respectively, for the manufacture of a set of 4 coasters, 32 corks are required);
• A roll of cork board, mat, or plate coaster (for cutting out the base of the coasters);
• Hot glue;
• Leg-split.

Step 1. Arrange your corks in pairs in a square format, as shown in the photo below. Using hot glue, apply a bead of glue between two corks and press them together for 30 seconds. Repeat the process for all other pairs.

Step 2. From a sheet cork (board, rug), cut a square corresponding to the size of the future stand. Next, apply hot glue on it, wait 15-20 seconds. and glue your blanks.

Step 3. Fill the gaps between the plugs with glue and let it dry. For better adhesion of the glue to the corks, you can put some kind of press on the workpiece.

Step 4. Wrap the craft with twine and tie a knot.

Do-it-yourself coasters for mugs, glasses and glasses can be beautifully packaged and presented to a friend

If desired, the coasters can be made round, triangular or hexagonal, cutting off the excess with a knife.

According to the described principle, you can make such a hot stand with your own hands. By the way, in this case, an old CD will do as a basis.

Idea 7. Wall panel

Another craft idea for the home and kitchen, which you can do with your own hands from wine corks- wall panel for decorating the interior and storing notes, memorable photos and postcards.

Panel of corks in a frame from Ikea

To work, you only need beautiful frame(from a picture or a mirror), paint of the desired color, hot glue and a large pile of corks. Corks can be laid out in a herringbone pattern, checkerboard pattern, even rows, and in other ways that you like. If necessary, for example, if there are not enough traffic jams, they can be cut lengthwise or across. And to make the corks easier to cut, they need to be soaked in hot water for 10 minutes.

Other interesting ideas making wall panels with your own hands.

Idea 8. Universal knife holder

Knife stand - very useful device for the kitchen, which helps to contain working space in order and keep the sharpness of the knife blades longer.

Making a knife holder with your own hands is very easy - just pick up a small vase and fill it tightly with bamboo / wooden skewers, colored beans or ... colored spaghetti, as in our master class.

To make a knife stand, prepare:

• A container or vase is the height of the blade of your largest knife. The shape of the container can be any, but without any bends;
• Spaghetti, lots and lots of spaghetti;
• Several ziplock bags big size(or just large packages that can be tightly tied into a knot);
• Alcohol (for example, vodka);
• Liquid food coloring in your desired color (or multiple colors if you want to make a multi-color filling)
• baking sheets;
• Aluminum foil or an old oilcloth tablecloth;
• Paper towels;
• Kitchen scissors.

Instruction:

1. Make sure your container is clean and dry, then fill it tightly with spaghetti. When the container is full, take out the spaghetti and add a couple more bunches of pasta to this pile as a spare (in case of replenishing broken sticks).
2. Divide the spaghetti evenly among the bags and pour enough alcohol into them so that it can wet all the sticks. Next, add 10-40 drops of food coloring to each bag.

1. Seal or tie your bags, then put them in additional bags to avoid leaks. Slowly shake and turn the bags to mix the dye into the alcohol and pasta. Next, lay the bag on one side and leave for 30 minutes, then turn the bag over again and leave it for another half hour. Continue soaking the spaghetti in this way (no more than 3 hours) until it reaches the desired color.
2. Cover your baking sheet with aluminum foil, then a layer of paper towels (or oilcloth). It is advisable to wear gloves to protect your hands from staining. Remove the spaghetti from the bags, after draining all the liquid, lay them out on a baking sheet in a single layer and leave to dry. From time to time, spaghetti needs to be sorted out for them to dry evenly.

1. Once your spaghetti is COMPLETELY dry, start putting them in the container.
2. Shake the filled container and flatten the spaghetti. Insert your knives to determine the optimal filling density, add pasta or remove excess if necessary.
3. Now, using kitchen scissors or other very sharp scissors, cut the spaghetti to desired length without taking them out of the container (best to do this over the sink). It is important that spaghetti does not exceed the height of the container by more than 2-3 cm, otherwise they will break quickly.

Idea 9. Jars for storing spices and bulk products

Today we will talk about the express technique for making a paper basket, which can be used to store small items (keys, stationery), yarn, as well as for unusual serving of fruits, Easter eggs, bread or pastries to festive table or as a gift.

Even a child can weave such baskets quickly and easily.

You will need:

• About 15 sheets of A3 thin paper, cut in half along the sheets (this can be printer paper, a sheet of newspaper in full spread, and even baking paper);
• Capacity right size with straight walls (for example, a jam jar);
• Glue in a stick;
• One skewer;
• Spray paint (optional).

Instruction:

1. Starting at one corner, begin to fold a piece of paper tightly around the skewer until diagonally opposite corner to get a smooth and long tube. When the straw is ready, add a few dabs of glue to the corner of the paper to fix it in place and pull out the skewer. Do the same for all remaining sheets. In this master class, it took 30 tubes to weave 2 baskets.
2. If necessary (for example, if you used newspaper sheets) or if desired, paint the tubes with acrylic paint.
3. Take even number tubes and connect them together as shown in the photo in the upper left corner. In this master class, it took 6 tubes for a basket the size of a jam jar, and 8 tubes for a larger basket.

1. Start braiding: take one of the outer tubes (which is under the grate) and pass it over the next tube, then pass it under the next tube, then pass the tube over the next tube again, and so on. Continue weaving by lifting the already wrapped tubes vertically (now we will call these tubes racks).
2. When 2-3 cm remain from the first working tube, increase its length. To do this, apply glue to a new tube and insert it into the remaining "tail". Continue weaving again and again, adding paper tubes as needed.
3. As soon as you weave the base of the desired diameter (the same size as the container), place the container on it and start weaving around it, pulling the rack tubes close to the walls.
4. Having finished weaving the basket to the end, take out the jar and carefully wrap the end of the working tube in weaving.
5. Wrap the ends of the uprights inside the weave and trim if necessary. Next, you can spray paint from a spray can, as in our master class.

Idea 11. Wall holder for towels and kitchen utensils

From an ordinary grater, you can make such a convenient and beautiful holder for towels and storing kitchen utensils or even live or artificial plants.

From a flat grater, you can make a decor for the kitchen in country style, Provence or Shabby Chic with your own hands

To make a heated towel rail and a tray for small things, you will need:

• A grater (preferably an old one, but a regular new grater is also suitable, as long as it is metal);
• Patina for metal (for artificial aging of the grater);
• small cutting board or just a wooden board;
• Wooden plate (for the bottom of the grater);
• Glue.

Instruction:

1. Follow the manufacturer's instructions to coat the grater with a metal patina, for example, in green, as in this master class.

1. Install a wooden bottom in the inside. It must first be cut to the size of the top of the grater. As a rule, at the top of the grater there are protrusions from metal handles, it is on them that the bottom will be attached.
2. Screw the grater to the board with self-tapping screws, having previously made holes in it with a nail and a hammer.
3. Mount the board on the wall near the sink, hang a towel on the handle, put your spatulas, ladles or flowers inside.

Idea 12. Flower vase

Glass bottles from wine, milk or other drinks are almost ready-made vases that are just waiting to be painted. acrylic paints and/or clippings.

Almost every house has a lot of old ones that are often a pity to throw away - whether it's worn, but once beloved jeans or a blanket, a lampshade for a lamp or a table inherited from a grandmother. With a little imagination and patience, you can make these items with your own hands, which will favorably decorate the interior of your home. In addition, the completed craft can become original and an exclusive gift for your friends and family.

Opening the closet

The search for old things for needlework can start with a wardrobe. Surely somewhere on the far shelf there is an old favorite T-shirt or a worn sweater. Don't clutter your closet with things you don't use. Just give your rare jeans or blouse a new life!

Pants turn into... elegant shorts!

Handmade things will create unique image and highlight the style. Worn jeans can be easily recycled into summer shorts. For this you will need:

• scissors;
• rhinestones;
• lace;
• a little fantasy.

Measure the length of the jeans and mark the line where you will cut off the excess material. Try to carefully cut the fabric along the dotted line. Do not throw away the trousers themselves. They will come in handy for the next craft. Now decorate the bottom by carefully tacking it. Pockets can be decorated with rhinestones. Thus, a new and exclusive thing was learned.

Denim crafts. Master Class

The remaining trousers can be used to craft one of the following items:

• a mini handbag (you will also need a cream-colored strap);
• sofa pillow;
• hot stand;
• case for mobile phone;
• cover for e-book.

These handmade things will be very useful in everyday life. To create a hot stand, we need:

• 20 identical denim strips (15-20 cm each) cut from the leg;
• lace;
• threads;
• scissors;
• sewing machine.

All denim strips are laid in a braided pattern. Each horizontal row is stitched (10 times in total). The resulting square is cut off at the edges to make them more even. In order for the craft to look neat, braid or lace is sewn around the perimeter. Unusual stand is ready!

Taking care of the printed word

If you're an avid reader and used to keeping your books organized, make a denim cover for them. Despite the fact that this craft requires a minimum of effort, you will get an amazing result!

Materials:

• trouser leg (preferably with a back pocket);
• glue;
• scissors;
• needle with thread;
• book.

Measure the amount of material needed for the cover. To do this, lay an open book on jeans and mark a dotted line for the cut, leaving 5 cm as an allowance. Wrap the book in a cut-out blank, sew the edges well. Decorate the cover with a denim pocket, sequins, rhinestones - whatever you want. Decorate the edges of the cover with lace or braid.

Unusual decor

You can also make interesting things with your own hands and profitably change the interior of the room, giving it originality. Those who have accumulated a lot of buttons can be advised to make simple, but very for the home, such as:

New interesting crafts with your own hands you can also make from disks that have become unusable. It can be both Christmas decorations that even a child can easily make, as well as household items: chandeliers, curtains, jewelry boxes and much more. A lamp made of CDs looks very stylish and unusual. In order to fasten them together, you need to stock up on staples or metal rings. Holes in the discs must be done with a screwdriver.

These items, made by hand from old things, look very beautiful and unusual.

In the shop for craftswomen

You can make interesting things with your own hands using special material that is sold in any needlework store. It can be yarn, base for embroidery with a pattern, special paper, etc. This material is intended for classes certain types needlework: macrame, patchwork, decoupage, quilling, etc. Knowing the basics of work in this area, you can perform unusual crafts. A master class of this kind of classes is presented below.

We collect on a patch

Recently, patchwork has become an interesting and very popular type of needlework (translated from English means “work with a patchwork”). From scraps of fabric, skilled needlewomen create real masterpieces of art: blankets, rugs, carpets and even curtains. In order for the work to turn out to be of really high quality, it is necessary to select fabrics that are similar in texture. It is also desirable that the patchwork pattern is in harmony with each other. It is necessary to cut out pieces of fabric, taking into account allowances - from 0.5 to 1 cm. The cutting of the material is carried out along the longitudinal thread. Wash and iron the fabric first to prevent shrinkage. The material can only be drawn with soap, pencil or chalk, but not with a pen - there is a risk of traces on the front of the product.

Blanket "Spring mood"

For manufacturing, you need to prepare:

• green, pink, yellow, orange and blue fabric;
• soap, chalk or pencil, ruler;
• template - square 6 x 6 cm, rectangles 24 x 6 and 12 x 6 cm;
• scissors;
• sewing machine;
• a piece of fabric 111 x 83 cm (for the wrong side of the product);
• sintepon.

Prepare the fabric: wash, dry and iron. Lay out the prepared cardboard templates on the material. Cut out 12 squares of pink, blue, green and yellow, leaving a 1 cm allowance. In addition, you will need 60 squares of the same size but in different colors. With them you will sheathe a blanket around the perimeter. Prepare 24 strips 24 cm long and 6 cm wide of different fabric and 24 strips of 12 cm of the same width.

We begin to sew: take 4 squares of 6 cm in different colors and sew them together. Then sew 4 strips of the same color along the perimeter of the resulting product: 2 short strips on the sides, 2 long strips on top and bottom. In the same way, collect all the other squares. Sew the resulting products together. You should get 4 large squares in length and 3 in width.

The next step is to sew squares (set aside 60 pieces) around the perimeter of the blanket. The order of their arrangement by color is completely up to your imagination. It is now necessary to sew a fabric measuring 83 x 111 cm to the blanket (3 cm per allowance). Connect the 2 sides to each other with the right side inward. After you have sewn 3 sides, turn the product inside out and stuff with padding polyester. Then carefully join the 4th edge (by machine or by hand). Soft and beautiful blanket is ready!

In exactly the same way you can also throw blankets. Creative things (with your own hands), the photos of which are presented in this article, bring warmth and comfort! Try doing them yourself.

Crafts ... from food

You can even make things for the home with your own hands from food: various cereals, pasta, dough and even sweets. With a little imagination, you can make paintings, pendants and even watches! Buckwheat or rice must be glued to PVA glue on a pre-prepared template. Groats can be painted - and the picture will sparkle with all colors. Involve your child in the work - this will help him develop fine motor skills of hands and imaginative thinking. In order to create, you can use coffee beans. Also from this material you can make other interesting things with your own hands, for example, a chic bonsai tree that will delight your original view you and those around you.

Part of the East

To create a bonsai tree you will need:

• balloon;
• PVA glue;
• brown threads (slightly thicker than nylon);
• thick branch;
• flower pot;
• pebble.

The balloon must be tightly wrapped with a thread dipped in glue, set aside. The workpiece should dry for at least 4-5 hours. Next, the balloon must be pierced and carefully removed. On the remaining base, planted on a harvested branch, you need to glue coffee beans. The branch should be strengthened in flower pot using a pebble. A beautiful tree is ready!

Now you know that making things for the house with your own hands is interesting and useful!

Create beautiful and cozy interior in your home you can use crafts made by yourself. It is not so difficult to make such original things - professional skills are not needed for this. The things that we make with our own hands are unique, they give individuality to the interior of the home, bring diversity to the atmosphere.

From crafts handmade emanates a special warmth hearth. Thanks to unusual creative gizmos, you will get the opportunity to change the interior as you wish or in accordance with the seasons (for example, create christmas decor). DIY home decor is distinguished by its variety and purpose. Homemade beautiful things and useful crafts for the home can be used as original furnishings, decorative elements or as fixtures designed to store various household items.

In order to make things with your own hands, it is not necessary to buy expensive materials, you can use improvised means.

Creation unusual decor possible without large material costs. Most of you will have various unnecessary trifles in the house, for example, fabrics, multi-colored paper, buttons - all this can be used as a material for crafts.

There is such a “junk” in almost every house, if you dismantle the pantry or dig in the attic, you will find something. For the manufacture of beautiful new products and homemade little things will also come in handy natural materials, glue and thread. But the ideas of handmade decor at home are needed - of course.

Many people think that only people with experience can make and create presentable interior items on their own - this is a delusion. Show your imagination, combine materials of different textures, do not be afraid to experiment, and you will create not only beautiful, but also original decor for home.

Even if you have to tinker with the first thing, each subsequent decorative craft will come out better and better, and you will spend less time.

DIY home craft ideas

So, what can you do with your own hands for the home? Let's take a look at some ideas for inspiration. Among the proposed options, you will definitely find something interesting for yourself and try to make your favorite thing with your own hands.

Housekeeper

One of the useful things for the home, while performing a decorative function that you can make with your own hands, is the key holder.

The peculiarity of this housekeeper is that its design imitates brickwork. The basis for the key holder is thick cardboard (you can use part of a box). You will also need a dense toilet paper or thick paper towels. Dense material is needed so that it does not spread when lubricated with glue. Stock up on acrylic paints, varnish and glue (regular PVA will do).

Make the back wall of the key holder out of rectangular cardboard or plywood sheet. Hooks will be attached to the base. Cut out small rectangular bricks from cardboard, the size should be the same and glue them to the base, leaving a small distance between the parts. Not the entire surface of the cardboard is pasted over with bricks.

In the central part, you need to stick a plate decorated with an inscription, and place a beautiful picture in the upper part.

After that, coat the bricks well with glue, and put a napkin (previously crumpled) on top, a little more glue for impregnation. Using a stick, press a napkin or paper into the gaps between the miniature bricks to make corners. Give the piece time to dry.

Paint over the dried panel with paint (to simulate natural brick, you need to choose a red-brown shade). Use bronze paint to paint the seams.

After the paint dries, coat the bricks in the same tone using a dry brush (dip the brush in the bronze-colored paint, and then wipe it on paper until it is almost dry, and only then brush the brickwork).

On a note! When painting bricks with a brush, you need to drive without changing direction.

To make the key holder smooth, cover it with a transparent matte varnish.

The work is completed by attaching loops, after which it can be hung on the wall or presented to someone. In the photo below - the finished key holder:

Hanger for jewelry

All the fair sex love jewelry; almost every woman has jewelry that needs to be stored somewhere. The original storage for jewelry will be a hanger made like a picture.

In order to make a hanger for storing jewelry, you will need:

• baguette frame;
• plywood;
• stain (you can use paint as a substitute);
• hooks and handles from boxes;
• nails;
• screwdriver and drill;
• cutting tool.

Cut the plywood according to the size of the frame and coat it with stain, then dry it and attach it to the frame. Mark the places where the hooks will be attached and screw them on. It remains to hang decorations on a hanger.

Now you have a place to store women's treasures - jewelry.

Plastic canvas box for storing small items

A simple but presentable box designed to store various little things can be made from a plastic canvas.

Canvas is a material for embroidery. You will need a canvas made of plastic, you can buy it in stores that sell everything for needlework.

On a note! Canvas made of plastic is usually made in the form of sheets, A4 size. Perforations in plastic canvas vary in size. Canvases are produced with a different number of perforations, the more there are, the smaller they are.

In addition to the canvas, you need to stock up on the following materials:

• dense threads;
• large needle;
• fabric or beads;
• scissors.

Embroidery on plastic canvas is almost no different from the usual. Embroidery techniques can be different, the most popular are cross and satin stitch.

Plastic canvas is flexible yet very durable.

Decide what size your box will be. Divide the material into parts intended for the sides and for the bottom. There should be five parts in total. Make elements for the cover. Make a blank, the size of which is 0.5 cm larger in width and length from the bottom. The sides of the lid should be slightly narrower. You will need five more parts. Then sew the parts with dense threads (you can use both braid and even ribbons).

You can embroider any pattern on blanks. Drape the parts that are not embroidered with a cloth or embroider with beads.

Having issued all 10 blanks, start the assembly. At the first stage, the side parts should be sewn to the bottom. Then sew all the side elements of the box from the outside and sheathe the top along the edges. The last step is to assemble the lid in the same way.

We assemble the lid of the box in the same way.

A beautiful plastic canvas box is ready.

Wicker rugs in tapestry technique

One of the options that allow you to give the interior coziness is tapestry rugs. To weave such things, you do not need special tools. A tapestry rug can be made from improvised materials: thick threads that are used for knitting (they can be replaced with ropes made from old clothes) and cords.

The tapestry is a lint-free carpet made by hand. The base of tapestry rugs is decorated with ornaments created by interlacing threads. We will create plot composition in the form of a circle with drawn lines, a thread will run along them, which will serve as the basis.

All work is done with weft threads. Under the complex name, ordinary ropes and braid are hidden, from which weaving and decorative patterns are created.

• choose a strong thread to create the base;
• thread-duck broach should be done by hand;
• to make the tapestry more dense, you can press the threads to the center, for this they use a simple fork.

Stage one. We draw cardboard with a size of 500 x 500 mm. We carry out the firmware of the cardboard with the thread chosen for the base. To do this, cut the markings drawn on the cardboard and thread the rope through the lines so that it runs through the central part.

Stage two. Let's start weaving the tapestry. It is necessary to carefully fix the initial thread. Weaving in the technique of tapestry consists in pulling the cord underlying the alternation of one thread from above and the second from below.

Stage three. Having weaved the last turn of the thread in a circle of cardboard, you need to turn the resulting rug on the reverse side and cut off the base cords. When trimming, leave about 5 cm at the ends. Pull the ends of the laces out of the notches made on the cardboard (the picture does not need to be removed during pulling out) and tie them in pairs. Attach pompoms to the resulting knots.

Finish the composition by sewing a thick rope on the wrong side in a circle - this will hide the knots and ends of the threads.

Advice. Using different textures and shades of threads, you can make different rugs and then combine them into one. You will get a large carpet that can be hung on the wall or laid on the floor.

A tapestry rug laid on the floor will make it warmer, and besides, it looks beautiful. Weaving a tapestry rug with your own hands is not difficult: try it and see for yourself.

Ribbon curtain

You can make an unusual curtain from ribbons. The tape blind is suitable for both windows and doors. It will take a little time to make a curtain from ribbons, even a sewing machine is not needed. Fluttering tape curtain repels insects well; earlier such curtains were made from newspapers cut into strips.

To make a curtain from ribbons, you need the following materials:

• ribbons or fabric strips (with not fraying edges);
• cornice;
• clips or buttons.

Tapes need to be thrown over the eaves and fixed with clamps. Large beads can be strung on fabric strips for decoration.

The tape curtain performs not only a practical, but also a decorative function. The advantage of a curtain made of ribbons is lightness. This is a great option for giving, the tape curtain can be hung in the apartment.

Flower pots from paper bags

Many people have paper bags at home, instead of throwing them away, make flower pots out of them.

Materials for making flower pots:

• paper bags;
• wooden skewer;
• scissors;
• rope;
• glue;
• plastic container.

Take paper bags and make a markup on them: eight strips measuring 70x300 mm, then cut the paper along the dotted lines.

Place a wooden skewer in the corner of one of the strips and wind it around paper base diagonally. You must make a paper tube from each strip. Seal the corners of the paper tubes so they don't unwind. The easiest way to do this is with a glue gun.

Take a plastic container, apply glue to it and wrap it with paper (from all the same bags) so that the plastic is not visible. Glue paper tubes to the bottom of the container. Cut paper strips 70x450 mm (you will need large bags) and make straws.

Wrap the tubes so that they are pressed tightly against the walls of the container. Attach a long tube of paper with glue to the bottom of the container, and wrap it around it, you need to braid the main tubes. Wrap all the main tubes, and then change the direction of weaving to braid the missed tubes - this is how you need to wrap the entire container.

Make two holes in the sides of the pot (above).

Pull the rope through the holes made, at each end of the twine you need to tie a knot in order to fix it well. Another woven tube will help to hide the ends of the twine. Wrap the tubes protruding above the pot inside the container and secure with glue.

Unusual flower pots are ready.

Handmade homemade things can be used as a decor element in your home or as a gift to friends.

Most of the things made by hand are not only beautiful and original, but also useful and necessary in the household. Feel free to start working on homemade things and decorate your home with them.

Video Five more ideas for handmade crafts with your own hands to decorate the interior of rooms, see the video below:

There are people who inspire: with their lives, their work, becoming an example for others. And quite recently I was lucky to meet one of these representatives.

Mikhail is a leading architect in the capital, and he is also a practical decorator. In all his design projects, he brings handmade items, which fit perfectly into the interior, adding liveliness, comfort and benefiting the owners of the house.

The most interesting thing is that most of his handicrafts are things that until recently lay in the attic or pantry and, in fact, were old trash. But it is worth applying to them creativity , a little patience and a few hours of work, and sometimes only half an hour, and in front of you is no longer garbage, but cool decor items!

To beautifully decorate your living space, there is no need to purchase expensive decorative interior items. After all, all this can be done with your own hands. The main thing is to have imagination and be able to handle various materials and tools!

Editorial "So simple!" invites you to familiarize yourself with 11 decor ideas that will be useful and bring comfort to your home. No. 4 conquered even my husband!

DIY home ideas

1. Turn an old door into a unique table: coffee, dining or work. To do this, you need to install the door on the legs like a countertop.

   

2. With knitting skills, you can create many beautiful things. For example, using yarn or threads, you can get unusual wall tapestries that will help enliven the interior and create an element of exclusivity.

   To make such a panel, tie the threads of the chosen color into thick braids, then connect them together into a single carpet. Make loops along the top edge so that the tapestries can be hung on the wall.

   Pass a bamboo stick with a rope threaded through it through all the loops and hang the decoration on the wall. That's it, the beauty is ready!

   

3. Great garden chair idea!

   

4. Another item that is easy to make with your own hands is a hammock. Such a product will be a great addition to any interior.

   All you need is old pieces of fabric and strong threads.

   

5. Make an original DIY lamp with wire lampshade even beginner needlewomen can do it. For its manufacture you will need: colored wire for home needlework, a light bulb, a cartridge with an elongated wire and multi-colored bilateral figures on a clothespin - in our case, butterflies.

   Numerous charming, quivering, multi-colored butterflies emphasize the airy lightness of the wire model, which will add a little magic to the house.

   

6. A rug made of flat stones fixed on a rubber base will add an element of sophistication to the house. Also as finishing material wood saw cuts, polished and impregnated with antiseptic compounds, are great.

   

7. Use old tie-down straps and you have this hallway stool.

   Well, if you get bored, you can take it apart and return to reading these books again!

   

8. If you are bored with the design of the old door, use this great idea.

   

9. Unusual design of bottle vases.

   

10. An interesting decoration of a candlestick or a small vase with the help of shells brought from the sea.

    

11. Also, concrete, gypsum and clay provide scope for creativity. These materials are used to make unique stucco elements for interior decoration.

    They also make beautiful garden lamps , original vases, whimsical candlesticks, exclusive figurines and other decor.

    I really like this idea of ​​creating a stylish candle holder. Great, isn't it?

    

I also suggest that you learn 7 simple and effective ways like right now. For those who want to diversify the atmosphere in the kitchen, giving it originality, bright colors and at the same time the atmosphere of comfort!

Making something interesting is not only profitable, but also useful. In addition, the whole family, including young children, can participate in this exciting activity.

In a short period of time, without having any experience in performing similar creative projects, from ordinary things and improvised material is possible for your home.

Tell me about these great ideas to your friends on social networks, because inspiration is so contagious!

Nastya practices yoga and loves traveling. Fashion, architecture and everything beautiful - that's what a girl's heart aspires to! Anastasia is engaged in interior design, and also makes unique decorations with a floral theme. Dreams of living in France, learning the language and keenly interested in the culture of this country. He believes that a person needs to learn something new all his life. Anastasia's favorite book is Eat Pray Love by Elizabeth Gilbert.

If you have a fabric umbrella, it is easy to convert it for this you need to take:

• transparent elastic film;
• scissors;
• wide braid;
• thread with a needle.

Open the fabric, attach it to the film, cut out a similar-shaped top for an umbrella from it. On the sewing machine or on your hands, stitch the braid along the edge, making a seam on one side, and then on the second, which will be parallel to the first.

Make a small circle in the center of the cellophane circle. To make this place strong, not torn, it is also better to sew a braid here. Put a cellophane cover on the umbrella, on your hands sew it from below to the knitting needles, piercing the braid with a needle. After that, you can cover the sown seeds.

There are other interesting ideas for a vegetable garden, a garden, which are very easy to implement with your own hands.

This is how beautiful the signs of what is planted where can be. On dark stones, write with white acrylic paint, and on light ones - with color.

Pets won't trample on beds with still weak sprouts if you stick disposable plastic forks left over from a picnic here. In the course will go and knives from the same material. You can write on them with a simple pencil where what is planted.

Speaking about what interesting ideas for a garden garden with your own hands can be quickly implemented, let's focus on the next one. Summer residents know how quickly the soil dries up in street planters. If there has been a heavy downpour, water, on the contrary, can stand in a pot and lead to rotting of the roots of the plant. Ordinary baby diapers will help create optimal soil moisture in such a container. They will absorb excess moisture, and in a drought they will give it away.

To do this, simply lay a diaper on the bottom of the planter, fill in the soil, water it, plant a plant. Now you don’t have to worry about how green pets feel in the country while you are in the city at work.

How to make a pond from a tire in the country?

Using interesting creative ideas, you will create it with ease. Look at the photo of the master class, which shows the stages of work. Then prepare what you need, this is:

• tire;
• durable film;
• decorative stones;
• plants;
• cement;
• sand.

If you plan to use the tire as a small decorative artificial pond, then you can take a tire from a car. If you want to take water procedures in such a homemade pool on a hot day, in this case you will need a tire from a truck, tractor or special equipment.

Clean the tire from dirt, leaving only one side of the wheel, cut off the second with a sharp knife.

To make it easier to cut the tire, lubricate it laundry soap. Cut the cord with a hacksaw.

The tire can be completely dug into the soil or only a third. Put it in place, outline the outline of the wheel with a shovel. Dig the soil to the desired depth. If you want to make a decorative pond to decorate an area in which they will not swim, then lay thick cellophane inside the tire. Secure the edges with stones.

Make sure that the film is not too stretched, but is freely placed in the tire so that the cellophane does not tear during operation.

Prepare a mortar of cement, sand and water. Using it, lay the rest of the stones along the edge of the pool. When the concrete dries well, it remains to pour water, and you will have a decorative pond in the country. It is pleasant to plant aquatic plants near it with your own hands.

If you plan to swim in it, then you need to dig recesses in the soil along the contours of the wheel, select the ground, pour a gravel-sand cushion, pour it with cement on top. When it dries, place a tire on the platform, pour 2 more buckets of concrete into it, level it so that there are no holes left between the bottom and the walls of the pool.

AT ornamental pond water can be cleaned with a net or by periodically adding preparations to clean it. And in a do-it-yourself pool, the water must be drained after it is contaminated in order to replace it with clean water. See how the drain system works.

Creative ideas will tell you how to decorate such a pond or pool in the country. Before filling with water, it can be painted inside and out.

If you plant moss along the edge of a dug-in pond, such a pond will also look great. Inside you can place small pebbles.

Looks good exterior finish a pond of stones that are "planted" on a concrete solution.

If you don’t have a dacha, but you want to have a small decorative pond, make it from a large planter and put it on the windowsill. Among indoor flowers, this one looks wonderful and creates the humid microclimate they need.

For a small home pond you will need:

• flower pot or pot;
• a strip of roofing felt, corrugated iron or other waterproof material;
• clay soil;
• water;
• aquatic plants.

Bend a piece of waterproof material near one side of the pot, fill in the soil here, plant the plants. Pour water into the planter, plant pond plants such as lilies here.

And if you have not one, but several tires in your country house, then, in addition to a pond or a pool, you can make a swing for children. For the first, you must first cut a notch on the side of the tire, turn the tire to the other side. Both sides are cut in the form of petals. It remains to tie 2 strong ropes, and a children's swing
ready to give.

You can make such a swing for the kids. For these use:

• tire;
• wooden board;
• bars;
• saw;
• paint;
• self-tapping screws.

Saw the tire in half. Attach a board to any half, mark where the bars will be located. Also attach them to the tires with self-tapping screws. It remains to paint your creation, let the coating dry, and the swing is ready to give the photo shows the stages of work.

How to decorate a mirror in the house?

Not only in the summer cottage, you can embody a lot of interesting things with your own hands, the ideas of your home will tell you how to decorate a backyard or city dwelling at the lowest cost.

See how to decorate a mirror to make it stand out. If you spent a vacation at the sea, brought shells from there, use this design element. You can also buy them in the store. To decorate the mirror, take:

• mirror;
• degreasing solution;
• shells;
• glue.

Shells can be glued around the perimeter on the mirror itself or on its durable frame. If you want the decor to be in the same style, take shells. various shapes but in the same color scheme.

When decorating rectangular mirrors, place large elements in the corner. Arrange identical shells in groups.

The pebble looks nice too. See how the decor of the mirror is done with the help of such smooth pebbles.

In order for the shells and stones to hold well, do not forget to first degrease the surface, and then glue these decorative elements to it.

And here are other ideas for the home, which are also interesting to implement with your own hands. See how to decorate a mirror with a mosaic.

For work, take:

• sheet of thin plywood or hardboard;
• jigsaw;
• glue;
• mosaic tiles;
• double sided tape;
• mirror.

We follow these instructions:

1. Put the mirror on a sheet of hardboard or plywood, outline it, leaving the same allowances for the frame on all sides, cut it out. If you have a wood or plastic frame ready, use that.
2. Attach the mirror to the base with double sided tape.
3. When applying glue to the frame, apply mosaic elements here. They can be left as such or at the end of the work, apply grout, let it dry, remove the excess with a soft cloth.

And here's how to decorate a mirror with ordinary plastic spoons.

For this idea, use:

• thick cardboard;
• scissors;
• plastic spoons;
• paint in a can;
• pencil;
• mirror.

Manufacturing:

1. Cut off the handles of the spoons. We do not need these elements.
2. Put a mirror in the center of a sheet of cardboard, outline. Outline the outer line along which to cut the frame.
3. We begin to glue blanks from spoons first inside, stepping back from the place where the mirror will be glued. After completing the first row, go to the second, then to the next.
4. When all the blanks are glued, cover them with spray paint, let it dry.
5. Glue a mirror to the center of the frame.

By the way, from spoons, but from metal ones, wonderful interior items are obtained. If the old lampshade has become unusable or burned out, drill holes in the upper part of the spoons, thread the fishing line here, tie it to the upper ring of the lampshade.

Having cut off the handle at the metal fork, bend the rest with pliers and get such an original ring.

A grater will help you store your earrings in an original way and never lose them at home.

Crafts from kinders

Children love to receive kinder surprises as a gift, eat chocolate, and take out a toy. Do not throw away plastic packaging, they will also give a lot of interesting ideas for your home, garden.

Let a vase with flowers flaunt on the table that will never wither. For such an interior decor, take:

• plastic packaging from under kinder surprises of different colors;
• straws for a green cocktail;
• scissors;
• small glass jar.

Take two halves of a kinder egg, cut in a zigzag pattern at the bottom. The next step should be taken by adults. Clamp the nail with pliers, heat it over the burner, make a hole on the back of the half of the egg. Insert a straw here.

To secure it, cut with scissors or tie directly into the tulip over the hole in a knot.

After the kinder toys are removed from the eggs, plastic packaging can be used to make interesting entertainment for young children.

This will require:

• kinder surprise packaging
• a hammer;
• nail;
• pliers;
• lace;
• caps from plastic bottles.

Lay the lids on a work surface and use a nail and hammer to make holes.

And in a plastic container, make it with a hot nail. When the blanks have cooled, you can use them. Pull the string through the hole in the plastic egg, tie a knot on the back.

Educational toy for children is ready to use. Let the baby string the lids on the string.

So that the end of the lace does not fray, grease it with natural glue made from starch brewed with boiling water. Artificial adhesives do not use for such a children's toy.

To diversify useful entertainment, invite your child to string lids with holes on the pyramid, and its elements on a string.

Such a pyramid and a kinder toy also looks good in the interior, as well as a tea set.

For him, the child will need:

• Kinder surprise containers;
• plasticine;
• a sheet of glossy cardboard.

To make a teapot, let the child roll a thin “sausage” out of plasticine, cut it in two. One half will become the spout, and the other half will become the handle of the teapot. Other actions will also help develop fine motor skills: let the baby make another oval from plasticine, cut it into circles with a plastic knife. The largest one needs to be attached to the top of the teapot, and decorate it with the rest.

By the same principle, a sugar bowl is made and cups are decorated. Saucers - from plasticine.

From thin paper ribbons, you can make elements using the kanzashi technique and attach them by making: a teapot, a samovar, cups, a sugar bowl.

Such DIY ideas for the home will help unity with the child, make the living room even more comfortable. After all, then you will play tea drinking with him, seating dolls and animal figures next to him. To do this, make these stools with your children, for which you need:

• hair bands;
• toothpicks;
• cardboard;
• scissors;
• glue.

To make a seat for the first stool, glue elastic bands folded in half to the cardboard, for the second one, the rubber bands are sewn in pairs and then interconnected. For a yellow seat, the elastic bands of this color need to be twisted. To do this, the second is threaded into the first, twisted, then the third into the second, and so on.

The rubber blanks are glued or sewn to the cardboard, then you need to glue 4 toothpicks on each stool - these are the legs.

For a kinder collection, several chocolate eggs are required. And from the remaining container you can make a Christmas wreath or just decorate your home. To do this, plastic packaging must be painted with acrylic paints, and then glued together in the form of a ring.

If you want to get such funny chickens, then glue red paws from colored paper on them. From the same material make eyes and beaks.

Putting 4 black rubber bands on each yellow package from under the kinders, you need to bend the wire in the form of antennae, glue paper wings, and paint the muzzle. You get such mischievous bees.

And here are other ideas for creativity that will decorate the house. Let children's work be placed on the stand. Show them how to make these adorable animals using plastic containers from kinder surprises and plasticine.

And if you cut out strips from cardboard, fold each into a pentagon, glue them together, then you get such honeycombs. Plant bees here, and you will have a natural corner at home.

Similar material is useful outside the city. Such ideas for giving will tell you how to decorate a mesh fence.

And to make juicy strawberries, take:

• Kinder egg packaging;
• acrylic paints;
• brush;
• pencil;
• wire;
• green plastic bottle;
• scissors;
• candle.

Manufacturing instructions:

1. If your Kinder packages are not red, cover them with paint of this tone.
2. When it dries, by lowering the pencil lead into black paint, make dots on the berries.
3. Cut off the neck of the bottle. Next, working with scissors, cut the tape from the bottle in a spiral. To attach it to the wire, heat sections of it over a flame and wrap it with plastic tape.
4. Cut out a small circle from the bottle, make its edges zigzag. This is the green of the berry.
5. Heat the remaining free tip of the wire over the flame, pierce the greens of the “berry” with it first, then it itself. Bend this end of the wire with pliers.
6. Use glue or a flame to attach the green plastic leaves to the trunk. Here's what garden figurine you got it.

If you want to see other interesting ideas for giving from improvised material, watch the video.

The second one tells how to decorate mirrors with film and rhinestones.