How to make an unusual clock. DIY watch decor: we make a masterpiece from Chinese stamping (44 photos)

Surely you guessed that skilled people can transform anything and, as a rule, this does not require a lot of money or unique materials. Enough improvised means and good imagination.

We wrote in the previous article, so check it out. Perhaps you can pick up a few ideas for yourself.

Today we will talk about how to transform a wall in your house or apartment by creating a clock. If you want to learn how to make a wall clock with your own hands, then this article is for you.

Clock "Flower"

To make this watch you will need:

• Plastic teaspoons of any color - 220-250 pieces;
• silicone adhesive;
• Scissors;
• Dial from an old clock;
• Paint (optional);
• Screwdriver and screws;
• Expanded polystyrene or ordinary foam of medium thickness - one square.

Take the styrofoam base and cut a hole in the inside for the dial. Using self-tapping screws and a screwdriver, make fasteners so that the future product can be hung on the wall.

Then take the spoons and glue the heads in the form of a flower around the hole, as shown in the picture.

When the gluing is over, you can paint the spoons in any color if you chose white.

When the paint dries, put together the dial and the "petals".

As a result, you will get such a clock.

moon clock

Such a clock will be the perfect solution for a nursery, especially if your child loves space and everything connected with it. In addition to the Moon, you can take any satellite or planet of the solar system.

You will need:

• Plywood sheet;
• White cardboard;
• Scissors;
• fasteners;
• Glue;
• Clockwork;
• Printed print of the moon or planet.

Take a sheet of plywood and cut out a circle of the desired size. Based on the resulting circle, cut out the backing for the watch from white cardboard. Next, glue the cardboard onto the plywood.

After that, take a printout of the moon and cut it to fit the base, then glue it on. When the print is dry, drill a hole in the center and install the mechanism.

Attach the fasteners to the back of the plywood and hang the product on the wall. This way you can make a big clock. The main thing is good print resolution and high-quality printouts.

watercolor clock

In order to make this clock out of wood, you will need:

• birch plywood;
• Watercolor paints;
• tassel;
• Wooden numbers for decoupage and silicone glue (optional);
• Clockwork;
• Fasteners.

Take plywood and cut out a circle. After that, using a brush, moisten the base with water and begin to carefully make paint stains. The color scheme can be any, according to your desire. When the paint dries, you can glue the numbers. If you decide to do without them, then you can proceed with the installation of the mechanism. To do this, just drill a hole in the center and set the arrows. You can also varnish the watch.

Finally, install the fasteners and everything, your watch is ready.

If the interior in your house or apartment is made in a minimalist style, you can make a wall clock with your own hands following all the rules of minimalism.

You will need:

• Plywood;
• Black paint;
• Gold colored clock mechanism;
• Fasteners.

Cut out a circle from plywood and paint it black, then varnish it. Cut a hole for the mechanism and install it. Attach fasteners and hang on the wall.

Knitted watch

If you ask how to make such a watch, we will answer - very simple. The only condition is that you need to be able to knit. Otherwise, there are no problems. You won't even need a crate.

You just need to have an old round watch, thread and knitting needles (hook). Knit a watch case and put it on top.

The result is this beauty.

Dominoes

Beautiful and original watches for which you need:

• Base - plywood, wood;
• Dominoes - 12 bones;
• Clockwork;
• Dye;
• Silicone adhesive.

Take the base, cut a square out of it and paint it any color you like. If you wish, you can varnish the base. After that, cut a hole in the middle and install the mechanism. After that, glue the bones according to the time. Attach fasteners and everything, the product is ready.

Beautiful wall clocks are always not only a source of information about the time, but also decorate the apartment interior, give it a special charm.

And if you think that making a wall clock with your own hands is very difficult, then you are deeply mistaken. This is a very real task, which is within the power of almost everyone. After all, for such a watch you do not need to assemble the mechanism itself.

In contact with

Classmates

It is taken from old watches or taken out of cheap Chinese alarm clocks. And already on this basis, you decorate them to your taste, taking into account the design of your apartment.

What are wall clocks made of?

If you decide to make a wall clock yourself or make a grandfather clock with your own hands, then you need to know that this can be done from almost any material. Of course, the most popular is wood. Due to its properties, wood clocks are made in a variety of shapes and serve for a long time.

Usually, not only wall clocks, but also floor clocks are independently made from this material. By the way, drawings for the manufacture of wall clocks are usually not required, but they may sometimes be needed for floor structures that have a more complex assembly.

Record clock

Plastic and other materials

Plastic watches are also popular. They are even more durable, but their manufacture is more complicated. The original clock can be made from cardboard, and the simplicity with which this can be done is surprising. As a material for wall clocks, you can use paper or, for example, records.

Note!

It is quite possible to make a clock for the kitchen from a tin can.

The additional material used mainly for the manufacture of arrows is also distinguished by a great variety. It can be tree branches, buttons, pencils or wire.

Cardboard clock

As we have already said, cardboard watches are made quite simply, so we will now tell you how to make a cardboard watch yourself. In order to carry out this venture, we need the following materials and tools:

1. Clockwork. It can be pulled out of an old unnecessary watch.
2. Piece of corrugated cardboard. Its dimensions depend on the dimensions of your future product.
3. Wooden disk.
4. , PVA glue, kraft paper (special high-strength wrapping paper).
5. (fine-grained and possibly coarse-grained), hook, decorative elements.

Paper clock

Main stages of execution

First you need to take a disk made of wood (the same goes for a wooden clock), and make a hole for the clockwork with a puncher. After that, we cut out two circles from cardboard and stick them on both sides, and in one of them we also make a hole for the clock mechanism.

Having made the base for the clock, you need to paste over the ends of the disk with cardboard, cutting out a piece with a width equal to the thickness of the disk and a length equal to its circumference. We fix it with PVA glue. Then you need to paste over the watch with craft paper and, on the reverse side, fix the hook with which we will hang our product on a carnation. By the way, a master class on making watches can be viewed below.

DIY wall clock video:

Final work

Now we need to color our disk black. It will be enough to do it from the front side. After the surface has dried, we make a hole for the arrows, using an awl for this. Now we need silver paint, which contrasts as well as possible with the black color of the disc and with its help we apply divisions and numbers on the dial. Paint the arrows with the same color. We finish our work with the installation of the clock mechanism and the decorative decoration of the ends and edges of the disk.

Note!

This can be done, for example, with rhinestones.

As can be seen from the presented instructions, the manufacture of watches from cardboard is within the power of almost any person.

Wood clock

Let's look at how quickly you can make a wooden clock. For their manufacture, you will need the following materials and tools:

1. Wooden disc with a diameter of 330 mm.
2. Wooden sticks and balls of small diameter in the amount of 12 pieces.
3. Clockwork.
4. Sandpaper, glue, .
5. Nippers and perforator.
6. Black cardboard and paint in two colors.
7. Pencil, scissors, ruler.

Step-by-step instruction

1. Sand the disc and balls to a smooth surface and wipe them from dust.
2. Cut wooden sticks to the same length. We choose the length.
3. Using a perforator, make a hole in the center of the disk, intended for the arrows.
4. Let's drill 12 holes on the end of the wooden disc. They will serve as grooves for sticks with balls. The distance between the disks must be the same. To do this, use a protractor and make marks every thirty degrees.
5. Pour glue into the holes and fix wooden sticks in them.
6. At this stage of making wooden watches, you need to treat the surface with a primer and, after drying, apply several layers of paint. The paint color, in our case, should be white.
7. Now we need to color the balls in red (it is most suitable for a white disk). To make it convenient to do this, we need a piece of foam and the remains of our wooden sticks. We string balls on them and paint them, after which we insert them into a piece of foam and wait for them to dry. For painting, we use a spray, since it is unlikely that it will be possible to evenly paint with a brush.
8. After drying, insert the balls into the sticks and “sit down” on the glue.

1. The final step will be to install the clock mechanism on the back of the disk and fix the arrows to it. The arrows are made of thick cardboard, painted black.

It is interesting! do it yourself - master class

Paper clock

In order to make a clock out of paper, we need the following materials:

1. Clock mechanism and hands.
2. The dial is made of wood or other dense material.
3. Decor paper and buttons.
4. Decoupage glue (acts as glue, varnish and sealant), ordinary glue, paints.
5. Small paper plate.
6. Ruler, scissors, pencil, pen.
7. Brush and foam brush.

plastic watch

Manufacturing steps

Let's look at how to make a watch with your own hands in stages.

1. First, we cut the paper (choose the color that suits you), in the form of an elongated trapezoid, along the length of the dial. In this case, all pieces should be the same in size and shape. The total area of ​​the paper should be larger than the dial, so that later it will be possible to bend the ends. Then we fix the paper to the dial with decoupage glue and wait until it dries. After that, we bend and glue the hanging ends to the back of the dial.
2. We apply decoupage glue to the surface of the dial in several layers. Each subsequent layer is applied to the previous one, but after complete drying. When properly applied, the surface of the dial will become glossy.
3. We make the markup of the dial. It is convenient to do this with a paper plate. That is, first we mark all the points on the plate, then we apply it to the dial and put the points already on it. After that, in place of the numbers, we glue, for example, buttons or something else that your imagination is designed for.

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Hello dear friends and readers! Today I want to show you how to make a clock with your own hands for a child.

All parents know how important it is to teach children to correctly tell the time by the clock. Especially if the kid is going to school.

Many children have difficulty counting minutes. Some cannot understand what 13, 14, 15, etc. means.

To easily explain how the clock works, how to correctly determine the time from it, you can make a clock model with your own hands at home. Moreover, it is not difficult at all.

How to make a watch with your own hands

For crafts we need:

1. A sheet of colored or white cardboard

2. Sheet of colored paper

3. Low box or box lid

5. Ruler, simple pencil, compass

6. Markers

7. A piece of foam

8. Needle with a tip at the end

9. Scissors

Sequence of execution step by step with a photo

♦ Take the box and turn it upside down.

♦ We cut out a square from cardboard to fit the box and glue it, this will be the watch case.

♦ Cut out a circle from colored paper. We draw it with a compass, you can also circle a round object, such as a plate.

> First, we divide our circle into equal 12 parts, in each part we write the numbers with a felt-tip pen from 1 to 12 as on the clock.

> Below, in front of each digit indicating hours, we write minutes in a different color.

> We draw lines from the edge between the numbers, 3 cm long, cut along them with scissors.

♦ Then draw and cut arrows from cardboard:

> We make the hour hand 6 cm long, 1.5 cm wide.

> Minute hand - 8 cm long, 1 cm wide.

♦ Glue the circle with the dial to the center of our case, leaving the edges free.

♦ We bend each edge in order, starting with 1 and write 13 under it, under 2-14, under 3-15 and so on up to 12.

♦ Attach the hands to the center of the clock with a tipped needle.

♦ To prevent the sharp end of the needle sticking out from below, you can attach a piece of Styrofoam or a cork to it.

Now you know how to make a clock with your own hands from cardboard and paper for a child.

With the help of them, it will be much easier for the baby to learn to tell the time.

Please click on the social media buttons and share information with your friends.

Stylish wall or table clocks can drastically affect the mood in the interior, bring some shade of your own into it. And wrist chronometers can change the image of a person. However, in search of a suitable option, you can spend a lot of time and still not find the right one. In today's article, we bring to your attention ideas on how to make a watch yourself, a master class describes in detail the various techniques for making and decorating watches.

Do-it-yourself watch from a record

From the plate, using the decoupage technique, you can make very beautiful chronometers that can be a gift for loved ones, especially those who are constantly late.

1. We find an unnecessary vinyl record, remove the label. It is better to choose one so that the middle is white - it is almost impossible to paint red with white acrylic.

2. We purchase a clockwork or take it out of an unnecessary watch.

3. We prime the plate from the can. You can simply paint the surface with acrylic using a sponge, but further work will be more convenient if primed with an aerosol. We dry.

4. Paint the background with a sponge. We chose slightly golden acrylic. Waiting for drying again.

• smear the surface with glue;
• wet the card;
• apply the card to the adhesive surface;
• on top we apply another layer of PVA;
• we expel all air bubbles from under the card with fingers or a brush;
• dry with a hair dryer.

6. Glue rice paper on top. We work with it in the same way as with a regular decoupage napkin.

7. We apply at least 3 layers of varnish.

8. We make marking drawings and paste the numbers of a suitable size.

9. We cut the hole sealed in the process of work again; turning the scissors a couple of times, we increase the hole for the clock mechanism to the desired size.

10. Insert the mechanism, put on the arrows.

11. If there is no loop included with the mechanism, then you can glue it on the Moment glue.

12. Also, if necessary, the arrows can be painted in a contrasting color.

13. Insert the battery.

So we learned how to make a wall clock with our own hands, the master class also revealed to us the features of working in the decoupage technique.

coffee clock

We continue to use decoupage to decorate watches, but another decoration option is also applicable. In this case, we will make a clock from coffee beans with our own hands, and the master class below is devoted to this particular topic.

Materials:

• blank with a hole in the center;
• clockwork;
• napkin with a beautiful pattern on the theme of coffee;
• coffee beans
• priming;
• decoupage water-based varnish;
• colored acrylic;
• contour on glass - silver, gold, bronze;
• stained glass paint;
• sponge, brush, regular and rubber roller, paper file, toothpick;
• PVA glue.

1. We prime the surface of the workpiece.

2. We paint one side with white paint, the other with brown.

3. On a dry surface, we spread PVA glue diluted in a ratio of 1: 2. Wet the napkin and glue it on top. Cover again with glue. We apply a wet stationery file and roll it on top with a roller, getting rid of air bubbles. Leave until completely dry. Then varnished.

4. With a contour, draw the boundaries of filling with coffee beans.

5. After 10-20 minutes, we can start decorating with grains. To do this, we cover a small area with stained glass paint and carefully place coffee on it in random order, moving a toothpick towards each other.

6. After an hour, the paint will dry, and everything will hold.

7. The dial can be made from improvised means, the same coffee beans, you can draw numbers using a contour. With the same contour, you can draw additional details: at least butterflies, if you think they are appropriate.

8. It remains to insert the clockwork, and the battery into it.

Such a clock can be hung in the kitchen: if you have not varnished the grains, they will give aroma for a long time.

Video Compilation

In this collection you will find other options for making watches with your own hands.

Wrist:

And other ways to decorate:

Marianne Nettina

Good day to the guests of my page!

In order to introduce clocks to older preschool children, to teach them how to set the time, we need a clock layout with arrows that can be rearranged.

For handouts or a didactic game, you can make a do-it-yourself clock layout from cardboard and cocktail tubes.

prepare white cardboard, black cardboard, glue, adhesive tape, tube, matches, clock face printed on a colored office leaflet (downloaded from internet)

Cut out the dial, stick on white cardboard, "laminate" with adhesive tape. With the help of an awl do a hole for a cocktail tube in the center of the circle. Cut from black cardboard arrows short and long. punch holes with a hole punch.

piece of tubule (1 - 1.5 cm) insert into the center of the dial, insert the arrows. With the help of matches or a lighter, set fire to the horses of the tube and press it down. The same on the other side.

These clock can be used in a didactic game to consolidate the parts of the day, to consolidate the numbers.

Hour hand

hour hand

Hour after hour,

Slowly, not lagging behind

And he takes us with him.

Minute hand

Minute hand

You are the watch sister.

Minute hand,

You are long and fast.

Count down the minutes

It's not a joke!

Related publications:

Defender of the Fatherland Day is coming soon and we are already thinking about what gifts to make with children for dads. I propose to make such a clock.

Material: 1. Cardboard 2. Red and white colored paper. For the torso we use A4 size red cardboard. 3. Cotton wool 4. Paste.

How to make exercise your child's favorite habit How to make exercise your child's favorite habit - This is not a mystery at all - To develop strength And all day long.

Preparation for a home holiday goes in three directions. Firstly, this is the creation and maintenance of a festive state, that is, an emotional state.

Master class "Clock". These clocks can be made with the children of the preparatory group and learn the time from them. 1. Cut out the base for the template.