Painting lining indoors - consider the options. Painting lining inside the house in different colors: beautiful ideas in the interior Creative ideas for painting lining in the country

Natural wood - what could be better? In addition, most have already enjoyed plastic and wallpaper to their heart's content, and have decided to switch to environmentally friendly material. Moreover, naturalness has come into fashion. How to paint a lining- a question that interests many. Buying the right paint should be approached very carefully, because the wrong option can ruin all the work. Therefore, it is not at all strange that it occupies a leading place in terms of prices, but oddly enough, almost everyone dreams of such material. Yes and the cost depends on the type of wood. If you decide to sheathe the walls with clapboard or you already have them from this material, then the question of whether how to paint a wagon will become itself. Wall decoration from this material can take place both outside and inside the house.. But many builders and designers prefer the second option.

wooden facade- it is certainly very beautiful, and it looks rich, but do not forget that wood, like no other, is affected by the environment and various precipitations. And this high humidity is very bad for her. This raises a completely logical question, why is it necessary to paint the lining inside the room. There is no snow, no rain, no other weather precipitation. Of course, there are times when wood is not painted, but left in its natural form. Undoubtedly, the tree has its own specific pattern, color, pattern, in addition to this, it always looks perfect everywhere, but painting is still necessary.

Why does the lining need to be painted?

1. This material is a sheet wood and it ignites very quickly. Naturally, not even the most expensive coating will give a hundred percent guarantee against fire, but there are special protective compounds, or flame retardants as they are also called. They greatly increase the protection of the material.

2. Any natural material after a certain time begins to deteriorate, that is, to rot. Antiseptics help prevent this process or slow it down. It is impossible to permanently get rid of rotting wood. The lining can not be painted, but it is simply necessary to use an antiseptic.

3. These coatings serve to protect against any damage. Placed in a thick layer on the wood, it takes the whole blow on itself and does not allow the intruder to get to the material itself.

4. Under the influence of the sun, the wood darkens, and does not brighten, as one might expect. That is why protective coatings repel the rays of the sun and thus preserve the natural shade of the wood.

5. The attractiveness of lining. Colorless varnishes give the wood not only shine, but also shade it a little. In addition, there are paints that drastically change the color of the material, if you need it.

What are the materials for painting lining?

In order for the wood to have a beautiful color after painting, the paint must be thoroughly mixed before the procedure itself. To the question - what is the best tool for painting? There is simply no single answer. After all, choosing the right one entirely depends on what exactly you want to achieve. If your goal is to protect the lining from various pests, then enough simple antiseptic. If you want to add shine, then you need to apply varnish. If you create a lining of a certain shade, then the coatings for decoration will fit just right. Today in construction stores there is a fairly large selection of products for various coatings and impregnations. Purely theoretically, it is realistic to divide them into two groups: means for protection and for decoration.

Protective equipment.

As already mentioned, the most popular are fire retardants, they keep the tree from fire. But the highest quality option is factory processing, because it is done under great pressure. Processing with your own hands will not create the proper result. Before painting the wood, it must be treated with an antiseptic to protect against insects and decay. An antiseptic is a drug that destroys various bacteria and also prevents their active reproduction. A lot of people just use them. When purchasing these funds, pay attention to the type of substance. The packaging must indicate - for internal use. If you want to protect the wood without changing its shade, then this is the ideal option.

Another way is acrylic varnish. It is made for protection and decoration at the same time. It can be tinted. There is an option - first apply a transparent varnish, and then a product with the desired shade, in this situation, the pattern and texture of the wood will not change. If the building material in the house is located in a room where residents are not always located, for example, a balcony. You can always use synthetic varnish. True, it contains chemicals that, as studies show, are harmful to humans. But such a tool lies very evenly and gives the lining shine. He has great competition wax products. They give a very beautiful matte shade, and at the same time protect the wood from pests. But they have the main disadvantage is that it is very difficult to apply.

Coatings for decoration. Oil-based paint is perfectly absorbed into the lining. Does not pass water, but after a short amount of time loses its color. using such a coating means that the natural color of the wood will not be visible. They are suitable for further coatings, because the original natural shade should not be hidden. Over time, the lining darkens. Yes, and most just want to change something in their home, so they resort to such painting. Designers advise not to paint the wood in a dark color, as the relief will be completely lost, but painting in pastel colors will be an excellent option.

Oil paint occupies a leading position. It has been in the arena of building materials for a long time. It fits perfectly into the top layer of the lining, keeps it well from water. At the same time, the shade does not fade. The disadvantages of this tool include: long drying time and very rich persistent smell. It is impossible to apply it in the cold season, because there is no way to ventilate the area well. If lining painted oil paint, then she will no longer be able to breathe normally. All these disadvantages were taken into account by the manufacturers, and they released another model - acrylate. It dries very quickly and does not have such a persistent chemical smell. The paint retains its color and gloss for a very long time, is very elastic and vapor-tight. This suggests that even when exposed to severe frosts or high exposure to the sun, the surface will not crack. Color and gloss do not change even when exposed to harmful rays. Her chief minus - the price is much more than oil. Acrylic lacquer made specifically for internal treatments, because it is non-toxic, does not harm people, and is suitable for a children's room. If you only want to change the shade of wood, then wood stain is a good option.

TOwhat kind of instools needed to paint the lining?

You will need: gloves, stepladder, bucket, fine and medium sandpaper, spray gun, work clothes, brushes of the right size, metal brush, small container, primer, wood bleach (may not come in handy), painting agent.

Initial wood preparation

Before painting a tree, it must be treated from any dirt, if this is not done, the paint will peel off. Of course, the whole process of preparing the surface before painting depends on what materials and means you have chosen. The preparatory processes can be divided into 2 types: painting new wood and re-painting. If you purchase a lining, then choose one that has already been treated with an antiseptic. As already mentioned, the factory method is much better than the home method. In the absence of an antiseptic on the lining, first of all, clean it of excess debris. Only then apply a layer of the product.

The most suitable option is deep penetrating agent. After you need to wait the required time specified in the instructions and you can paint the surface. If the lining is recently purchased, then it is better to process it before installation, since in this case it will be fully protected. If the wood is old and has already been painted, then you need to remove the layer of paint with a wire brush. Just do it carefully so that the lining is not damaged. If cracks occur, you will have to process the top layer. There are times when, after removing the old paint, a darkening of the wood was found, bleaching agents are used to remove it. If they are unable to cope, then you should use a stain for clarification. After completion of these works, it is necessary to apply antiseptic primer. It is applied to the surface with an even shade, if the wood was made lighter, then it is possible to cover the lining with a primer only after it has completely dried. But before applying it, the surface must be sanded with fine sandpaper. And only after it has completely dried, you need to start applying the paint itself.

1. Each type of coloring agent needs a certain number of layers, often 1-2. But this information needs to be clarified in the store.

2. Do not use a thick layer. It will blur one hundred percent, and the service life of this coating is not long. It is better to paint in several thin layers than one large one.

3. When applying various products, the brush should move along the surface without breaking away from it. You should not press with great force on it, it is enough that only the tips of the villi come into contact with the lining.

4. Immediately prepare thin brushes for hard-to-reach places.

5. In addition to the brush, you can use a paint roller, it will definitely not leave any villi on the lining.

Having experienced all the advantages of natural wood, many no longer want to give it up. Moreover, many have already had their fill of plastic and wallpaper, naturalness is coming back into fashion.

The choice of paint for lining must be approached very carefully, as an incorrectly thought-out decision can ruin the whole look of this material.

Therefore, it is not surprising that wooden lining is in the price category above the average, but at the same time, almost everyone can afford this material, since the price directly depends on the type of wood from which the lining is made. And if you are just going to sheathe the walls or you already have walls sheathed with clapboard, then the question will still be how to paint the clapboard inside the house.

You can decorate the walls with clapboard both outside and inside. But most craftsmen and designers prefer wood as a material for interior decoration. Finishing the facade with wood is possible, but still this is a street, where snow, rain, wind, frost, and high humidity do not affect the tree in the best way.

And why is it so necessary to paint the lining inside the house, because there will be no rain, no snow, no fog, no other negative factors? Yes, there are times when the lining is not covered and left in its original form. Yes, natural wood has its own individual pattern, color and texture, it looks beautiful and stylish in any room, but finishing is still necessary.

Reasons why lining needs to be painted

1. Clapboard is sheets of wood, and wood is a flammable material. Of course, no coating will provide 100% protection against fire, but there are special protective compounds (flame retardants) that significantly increase the protection of the material from fire.
2. All natural materials begin to rot over time. This is a natural process. But it can also be stopped if covered with a special compound. These are antiseptics. The lining can not be painted, but it is necessary to cover it with an antiseptic.
3. A special coating protects against mechanical damage, scratches and cracks. Being a strong layer on the tree, it takes all the impact and at the same time does not allow cracks to form.
4. In the sun, the tree does not brighten, on the contrary, it darkens. Therefore, protective coatings protect from the effects of the sun's rays, thereby preserving the natural color of the wood.
5. aesthetic appeal. With the help of colorless varnishes, you can give the tree only a shine or shade it a little. There are also paints that completely hide the original color underneath, retaining only the structure of the tree.

Back to index

Materials for painting lining

In order for the lining to shine and its color to be uniform, it is necessary to thoroughly stir the paint before starting work.

What material is best to paint the lining from the inside of the house? There is no definite answer, since the choice of material depends on what you want to achieve. If you only need to protect the coating from insects, rodents, fungi, mold and decay, then an antiseptic will be enough. If you want to give shine, then wood varnish is necessary. If you add color, then already decorative coatings.

Today, a wide range of various coatings and impregnations for wood is presented in hardware stores. Conventionally, they can be divided into two types: for protection and for decoration.

Back to index

Protective coatings

Flame retardants protect wood materials from fire. However, a better flame retardant coating is obtained by factory processing, as it is applied under high pressure and evenly. Do-it-yourself processing does not give such a result.

Before painting the lining, it must be treated with an antiseptic to protect it from mold, black spots and insects.

Antiseptics are compounds that kill bacteria and prevent their further reproduction. Basically, such products are on the same basis and protect against fungi, mold, insects and decay. However, when buying, you should pay attention to the type of work of the chosen tool. The label should say "for interior use". If you are looking for how to paint the lining inside the house without changing its color, an antiseptic is what you need.

A water-based acrylic lacquer designed for both protection and decoration. They are transparent and translucent. They can be tinted. You can apply the first layer of transparent varnish, and the second - with the necessary shade, but the relief and structure of the tree will be preserved.

If the room in the house, which is covered with clapboard, is not used for permanent residence, for example, a balcony, synthetic-based varnishes can be used. They contain substances such as xylene and toluene, which are considered harmful to human health. But at the same time, such a varnish lays down as smoothly as possible and adds shine.

Wax-based products compete well with varnishes. They give a pleasant semi-gloss shine, and reliably protect the tree from pests. However, there is a downside - such funds are quite difficult to apply.

Back to index

Decorative coatings

Oil paint for wall paneling is perfectly absorbed into the wood and does not allow moisture to pass through, but may lose color over time.

Painting the lining with a decorative coating means that the natural color of the wood will be completely hidden. Such products are suitable for the first coating, but initially there is no need to hide the natural color of the tree.

Over time, the tree darkens, and many people get bored with the color of the walls. In this case, you can radically change the color. However, there are design solutions when it is just assumed initially that the relief of the tree should be present, and the color of the walls will be completely different. The lining painted in pastel colors looks good, you can choose pale blue or white.

The leader can be safely called oil paint. She is a veteran in the building materials market. Oil paint has earned such a long stay among the leaders by penetrating deeply into the top layer of wood, it reliably protects it from damage and moisture, and the coating lasts up to 7 years, while the color does not fade or fade. But there are also disadvantages.

Oil paint takes a long time to dry and has a strong chemical smell. Therefore, it is impossible to paint with it in the cool season, when there is no possibility of round-the-clock ventilation at home. If the surface is painted with oil paint, it will no longer "breathe". Therefore, painting individual objects is not recommended with this paint.

Manufacturers do not sit still, so all the shortcomings of oil paint were taken into account, and acrylate paint was released. It dries quickly, does not have such a rich chemical smell, and is suitable for painting inside houses.

The advantage of acrylate paint is its ability to "breathe", vapor permeability and elasticity. In addition, it retains its color and luster for a long time.

The acrylate paint coating is elastic, therefore, even under the influence of frost, high temperature, moisture and sun, it does not crack. The color and gloss are preserved for many years even under the influence of ultraviolet rays. But the disadvantage is significant - the price of such paint is significantly higher than oil.

Water-based acrylic lacquer is designed specifically for indoor use, as it is non-toxic, harmless to human health, suitable for children's rooms, bedrooms, and people with allergies.

If you only need to change the shade of the wood, stain will do the job perfectly.

After you have chosen how to paint the lining, it's time to start the painting process itself. Initially, it is necessary to check all the necessary tools and carry out preparatory work.

Back to index

What can be useful in the process

You will need the following tools:

To paint the lining, you will need such tools as: a roller, brushes, goggles, adhesive tape, paint, and so on.

• gloves;
• stepladder;
• bucket;
• sandpaper with fine or medium grain;
• spray gun (if possible);
• brushes of the required width;
• clothes for work that you don’t mind throwing away;
• means for removing old paint (if required);
• metal brush;
• tray (for ease of painting);
• primer;
• wood bleach (if necessary);
• paint, enamel, varnish - depending on what you have chosen;
• impregnation.

Popular means to paint the lining inside the house: stain, drying oil, varnish, paint, impregnation. Step-by-step painting instructions + photos of various painting methods.

Clapboard trim is one of the most convenient ways to decorate. This material looks great both in a city apartment and in a private house, suitable for almost any room. Since from time to time the wood darkens and noticeably loses its attractiveness, many owners are thinking about how to paint the lining inside the house in order to preserve the texture of the coating.

Compositions for lining lining

Means for wood processing are divided into protective and decorative. The former help to extend the service life, the latter are designed for interior decoration. Before lining the walls, the lining undergoes the necessary treatment to protect it from mold, moisture, ultraviolet radiation, but over time, such a coating is erased and needs to be updated. That is why periodically the wood should be impregnated with flame retardants, bactericidal compounds and coated with various varnishes.

Compositions for lining lining	Description
flame retardants	Flame retardants reduce the level of combustibility of wood, which is especially important in a residential area. In the event of a fire, this will slow the spread of the fire and help extinguish it faster. Flame retardants do not emit harmful substances and practically do not affect the appearance of the finish.
Bactericidal formulations	These products will help to avoid infection with a fungus and stop the already developing mold. Even in a dry room, vapors can accumulate between the seams of the panels, and in combination with dust, these are ideal conditions for the development of microorganisms. Over time, antiseptics are washed out or evaporate, so re-treatment is necessary. There are special biomoisture protective compounds that simultaneously kill mold, repel pests, give the tree water-repellent properties and decorative effect. The cost of such a composition is quite high, but at the same time it replaces an antiseptic, stain and varnish.
wood stain	Impregnations also perform antiseptic functions, but additionally change the shade of wood. One of the popular impregnations is stain, which paints the surface in a darker color. The stain does not create a film on the surface, but is absorbed into the pores of the material to a certain depth, due to which the texture of the lining is clearly visible. The surface impregnated with stain must be varnished, otherwise the panels will appear dirty.
Linseed oil	Linseed oil is also perfectly absorbed into the wood, hardening its surface several times over. The lining impregnated with linseed oil is not afraid of moisture, it is not affected by fungus for a very long time, it has a beautiful matte shade and a pronounced texture.
Drying oil	But drying oil, which was previously widely used for lining, is gradually losing ground. The surface impregnated with drying oil quickly darkens and after 2-3 years begins to stick.
Bleachers	If dark spots, stripes, areas of a bluish tint appear on the lining, they are treated with wood bleaches. There are several varieties of this tool, which differ in the method of application and effectiveness. To remove wood stains, bleaching compounds are applied to the surface for a certain time, after which they are washed off with water. In most cases, the darkened areas return to their original color.
Varnishes for wood	For interior work, you need to use acrylic varnishes, which are the most harmless. Such varnishes perform a dual function - they protect the surface and make it more decorative. The first layer of the coating is necessarily transparent, and coloring pigments are added to the second. A good alternative to varnish are wax mixtures, which also effectively protect the wood and give the lining a semi-gloss sheen.
Oil paint	Oil paint is often used to decorate wood, and lining is no exception. Such paint penetrates deeply into the pores of the material, does not allow moisture to pass through, and is highly resistant to external influences. But at the same time, its vapor permeability is too low, it takes a long time to dry, and the color fades quickly.
Acrylic paint	Acrylate paint is superior to oil paint in all respects: it does not lose its luster and color saturation for a long time, penetrates perfectly into the lining, and dries faster. Its vapor barrier properties are very high, and the coating that it creates does not crack during temperature deformations of the panels. The only drawback of acrylate paints is their high cost.
Acrylic scuba diving	Acrylic scuba diving is the most optimal option for processing lining. They are harmless, create a durable decorative coating with high resistance to moisture and abrasion, do not fade with time. Lining treated with such a tool looks very attractive and expensive.

Rating 2019: TOP-3 lining paints

Acrylate latex paint "Harmony"

Paint «Tikkurila Harmony»

• High cleaning resistance
• Gives the surface a velvety effect

• Not suitable for doors and furniture
• Takes a long time to dry

Tikkurila Harmony paint prices

Paint Tikkurila Harmony

Water-based paint TEX washable Station wagon

Washable paint "TEX"

• Great for wet areas
• Drying time only 1.5 hours

• Not recommended for frequently soiled surfaces

Prices for paint "Tex Universal"

Paint "Tex Universal"

Paint "BELINKA WASHABLE" for interior walls

• Designed for surfaces subject to heavy wear
• Environmentally friendly
• Without smell

Prices for paint BELINKA VD WASHABLE B1

Paint BELINKA VD WASHABLE B1

Preparing the lining for painting

If a staining agent is selected, the surface of the panels follows. The quality of painting depends on the quality of preparation, so this stage is very important.

For work you will need:

• pumice;
• clean rag;
• paint brush;
• primer.

Step 1: Cleaning the Panels

First you need to clean the lining from dirt. They take 5 liters of warm water, dilute 150 g of soda in it, and then wash the entire surface with the resulting solution. For better adhesion of paint to wood, it is recommended to completely remove the previous coating layer, especially if there are delaminations and cracks. To facilitate this process, you can use a building hair dryer and a metal spatula: the coating is heated with a hair dryer, after which the paint layer is easily pry off with a spatula. There are also special liquids in stores: a little product is applied to the surface, they wait for the time indicated on the package, and then they rub the lining with a stiff brush and wash it.

Old oil paint can be removed with a piece of foil and an iron: the foil is applied to the surface, ironed slowly and the layers of paint are removed with a spatula within 20 seconds. After cleaning, they carefully inspect the entire lining: remove mold spots, treat darkened areas with special bleaches. Finally, wipe the boards with a clean rag to remove the smallest pieces of paint and dirt. If there are damaged panels, they should be replaced.

Video - How to paint the lining inside the house or in the country

Step 2 Sanding

Clean lining needs to be carefully sanded, and pumice stone or fine-grained sandpaper is best suited for this. In order not to miss a single section during grinding, it is recommended to divide the skin into small squares and process them sequentially. Do not press hard on the surface of the panel or rub one area for a long time, sanding should be as even as possible.

Step 3. Priming

After grinding, the lining is wiped from dust and a primer is applied with a brush or spray gun, carefully processing the seams between the boards. One coat of primer will be enough. Very often, surfaces are produced with the same composition that is intended for painting.

Prices for popular types of antiseptics

Antiseptics

Step 4. Painting lining

Apply paint to wood

The interior decoration of a country house should be durable, safe and durable. And if in winter it is empty and not heated, then it is also moisture resistant, since the risk of condensation in this case is very high. Not every material will cope with such tasks, however, if properly processed and decorated with natural wood lining, it will last for decades.

Depending on how to paint the lining inside the house in the country, it will have a different appearance: it will retain its natural pattern and shade or acquire a new one. And protective compositions for wood impregnation improve its performance.

Lining in the design of a country house

Any material made of wood must be coated with protective compounds. Without them, the finish will quickly lose its appearance and become unusable. Paints, varnishes and impregnations perform several functions:

• Improve the appearance of the front surface of the lining;
• Prevent natural darkening of wood;
• Protect against mold, fungus and rot;
• Reduce the release of resin from conifers;
• Improve water repellency, thereby preventing swelling and deformation;
• Reduce the ability to ignite and spread fire.

Coatings of different types solve one or more problems. Therefore, for the best protection, you have to choose several compositions at once. How to paint the lining inside the house depends on exactly what functions are assigned to the coating and what kind of finish you would like to get in the end.

Types of compositions for lining

All means for wood processing are conditionally divided into protective and decorative. Some of them need to be combined, others can be used on their own. Ideally, primary processing should be carried out before the installation of wooden lining, so the products will be protected from adverse factors from all sides. If the skin is already installed and coated, it will need to be removed or sanded.

Note! Eurolining, if it is made according to the standard, is already covered with protective or protective and decorative compositions.

protective equipment

The primary tasks of these compositions are to protect the tree from pests, mold, fungus, moisture, temperature changes and extend the life of the lining and finish coating.

Covering the lining with a protective compound before installation

Common means for processing wooden surfaces:

1. Primer. A popular decorative base. It improves adhesion, prevents the absorption of moisture and the release of resin, fills the pores and hides small irregularities. Compositions with an antiseptic additive are produced, they protect the tree from damage by mold and fungus.
2. Oil-wax. Creates a dense film surface that perfectly repels water. This treatment is necessary for rooms with high humidity.
3. Linseed oil. Deeply impregnates wood, hardens over time. Protects from moisture and gives the lining a pronounced structure.
4. Drying oil. A once popular processing tool. Today, it is being replaced by more advanced formulations. Improves the hydrophobicity of wood, but the coating quickly changes color and sticks.
5. Bleach. The material is more often used locally, where there are defects such as blue spots, natural darkening.
6. Antiseptics. Protect the surface from pests, fungus and mold. They are already used on the affected areas of the finish.
7. Flame retardants. Reduce the ability of wood to ignite and spread fire.

Oil-wax and linseed oil do not require additional processing, as they give the surface a pronounced pattern, and the color can be tinted. It is also permissible not to paint drying oil, but it will have to be updated often. Primer and antiseptics are used as a base for finishing.

Lining covered with drying oil

Decorative coatings

It is necessary to select these compositions taking into account the state of the finish. There are products that preserve and emphasize the natural look of wood, make annual rings more pronounced, give a shade. Others, on the contrary, hide the pattern under a dense colored layer. The former should be used if the lining has no defects (Extra, A and AB varieties) and old paint. The second, for products with numerous damages (grade B and C) and coatings that cannot be removed.

Transparent compositions for finishing wooden lining: varnishes, stain, some paints. Opaque: acrylic and oil paint, water-based.

Lucky

Acrylic, alkyd and water-based varnishes are most suitable for interior work. Completely preserve the natural appearance of wood. Pigment can be added to the composition, which will give the lining a shade. The varnished surface has a glossy or matte texture. Additionally protect the finish from moisture, discoloration and minor mechanical damage. May contain antiseptic additives.

Lacquer coating for lining

Decorative azure

Gives wood a pronounced structure and any color. It does not form a film on the surface, but penetrates deep into. The material is transparent, so the lining under it should be without significant defects. In addition to being decorative, it also has a protective function.

Variants of shades of decorative azure

wood stain

It has almost the same effect as decorative azure. Paints wood in saturated brown color of different shades. Stain is often used for artificial aging of lining. It is important to consider that it does not sufficiently protect against moisture.

Stain shades

Acrylic water-based translucent paint

Forms a thin layer on the surface of the wood, through which the texture and natural shade of wood are visible. Such paints hide minor defects in the finish.

Translucent paint on lining

Oil paint

Thick opaque finish. Forms a film on the surface. May have any shade. Keeps color and integrity for a long time. This lining paint needs to be renewed approximately every 5 years. Has a pungent odor.

Covering lining with oil paint

acrylic paint

More durable opaque finish than oil paint. Virtually odorless, dries in a short time. Can create a matte and glossy finish. Its only drawback is its high cost.

Matte acrylic paint

water emulsion

The colors are odorless and dry quickly. Form a matte or semi-matte texture. Suitable for dry rooms only.

Water-based paint for decorating a country house

The video shows an example of a competent combination of protective and decorative coatings for wall paneling, applied at home, without the use of special tools.

Tips for choosing a finish coating and interesting ideas

A wide selection of coatings allows you to choose absolutely any color and texture for lining. In the conditions of a country house, it is better to give preference to the most persistent and unpretentious compositions that do not have to be updated frequently.

If the panels have many defects or an old coating, then dense, opaque paint is indispensable. It is possible to improve the appearance of the base surface by removing the top layer of wood, but this is too laborious and time consuming.

An unusual combination of shades of paint for lining

The colors and shades of lining can be combined in the decoration of one room. This technique allows you to divide a spacious room into zones. Decorate or diversify the design, place accents.

Color accents in clapboard trim

Due to the color of the finish, you can achieve some visual effects. Light shades expand the space, dark ones, on the contrary, make it smaller. A white ceiling looks taller than a brown one.

The color solution for lining can match the palette of shades used in the interior or contrast.

Harmonious combination of color palette of textiles and walls

Lining processing technology

Protection and painting of lining is carried out in several stages. The first one is preparation. If the finish is new, then before covering the lining, it is enough to clean its surface from dust with a solution of 5 liters of water and 150 gr. soda. After drying, the first layer can be applied.

In the presence of old coatings, grinding with pumice or sandpaper will be required. It is better to do it with a grinder. The task of this procedure is to create a rough texture that will easily adhere to the coatings.

Cleaning walls from old paint with a grinder

If dense paints are applied to the lining, then they can be cleaned off mechanically (with a building hair dryer and a spatula, grinder) or with special chemical solutions. Neither method guarantees perfect results, but it's worth a try. This option is better than painting the lining inside the house right on top of the old finish.

The coating can not be removed, but then it should be degreased. Without fail, remove areas with crumbling paint, air cavities and clean to smoothness.

In the presence of serious defects, such as fallen knots, it is necessary to putty the hole and clean it to smoothness.

Applying protection

If the coating could not be applied to an uninstalled lining, then the joints should be more carefully coated in order to process as large an area as possible. The composition must be applied in a thin and even layer. To do this, you can use both a brush and a roller, as well as mechanical tools. If the protection is applied in several layers, then it is important to dry each of them thoroughly before painting the lining with the next composition.

Coloring

The method of applying the finish coat depends on its type. General rules for work:

• Use two brushes (wide for the main part, narrow for joints) or an airbrush;
• Painting starts from the top so that accidental drops do not spoil the finished surface;
• Pass one section once, in a continuous line;
• Some varnishes and paints are applied in two or three layers, each of which must dry naturally for several days;
• It is better to make several thin layers than one thick layer;
• Only painted finishes should not be exposed to UV rays and extreme temperature changes.

In hard-to-reach places, a foam rubber sponge can be used for staining. It is best to apply the composition over the entire area in a short time. If you want to take a break, then the joint must be located in an inconspicuous area.

Applying paint with a spray gun

For the interior decoration of a country house, lining is one of the best options. It does not require complex maintenance, and it is enough to restore the surface once every 7-10 years (depending on the type of coating). If you process it according to all the rules and taking into account the features of operation, the material will last at least 25 years.

Wooden lining is a beautiful, natural material. It is not surprising that so many users around the world prefer it as a finishing and cladding material.

The environmental friendliness and natural beauty of wood not only decorates the room, but also creates a certain microclimate in it. And the lining covered with a dense coating (paint, varnish) allows you to create any decor.

But, the tree has a significant disadvantage, which affects the performance of the lining - it undergoes decay, various damages, and also tends to darken.

This article is intended for those who want to protect and at the same time keep the lining in its natural form. Consider step by step how and what is better to cover (impregnate, process, paint).

I must say that the “take a brush, paint and paint” method is good, precisely because of its simplicity. But how long will wood painted in this way last? Wouldn't it be better to choose a more thorough and correct approach?

Proper painting of wooden lining consists of 4 stages:

Stage 1 - preparing the lining for painting

For eurolining, such a stage will be superfluous, since manufacturers are guided by the European standard, which provides for mandatory primary processing of wood with protective compounds.

Those who bought a standard domestic-made lining or deal with an already painted surface must first of all carry out the initial processing of the panels.

Preparing a new lining

Preparation of new slats includes:

• sorting. It is known that the intersection of varieties up to 10% is allowed. That is, a batch of first grade lining may contain up to 10% of second grade lamellae. In order not to disturb the surface, they need to be sorted;

• drying. Purchased lamellas must be dry before installation;

• maintaining room temperature in which it is planned. It is natural to heat the sauna so that the boards “warm up” makes no sense. But here it is necessary to lie for 2-3 days in the room where they will be installed by the boards;

• removal of defects. The surface defects of the lining include chips, roughness, the appearance of blue, white spots, dead (falling out) knots. On part of the panels, defects can not be touched. This is due to the fact that in the process of work, a short lining will be needed. For example, for finishing under a window or above a door. However, in order to proceed with the installation on an open surface, the boards must be cleaned of defects by bleaching (for this purpose, it is recommended to use SenezhNeo or Hoarfrost). Grease stains can be removed by deresining - rubbing with a 25% acetone solution. Roughness is removed with sandpaper (sandpaper) or a metal brush.

Preparation of the operated (old) lining

Unfortunately, painting a wooden lining is not an action that can be performed once for the entire period of its operation. Painting lining is a process that needs to be repeated periodically.

In the event that it is necessary to paint previously painted, varnished surfaces, the panels must also be pre-treated.

When to paint the lining:

• peeling of the bottom layer of paint;

• loss of lamella color;

• loss of gloss of paint or varnish;

• the appearance of a significant defect, for example, the ingress of fat, oil, solvent, other dye, the manifestation of fungi on the surface of the lining;

• new style, thirst for change and fashion. For example, the existing color of the lining does not fit into the updated interior of the house and other factors.

How to clean the lining from varnish, paint and dirt

There are two ways to remove old paint or varnish from the lining:

• Mechanical. In this case, the existing coating is removed with a scraper, wire brush or blow dryer and a spatula. To completely remove the paint, you need to treat the boards with a solution of soda (100 g of soda for 1 liter of water). A significant disadvantage of the method is the possibility of damaging the lamellas with a scraper. Tip: this method is suitable for cleaning the lining from oil paint.

• Chemical. It involves the use of various synthetic solutions and compositions (washes, softeners), which contribute to the peeling of the paint from the base. It is worth noting that the chemical method is quite aggressive. Work with solutions in a well-ventilated area with the necessary personal protective equipment. After removing the surface layer, the lamellas should be washed with water or rubbed with white spirit.