Decorative corners on the corners of the walls: application features. Decorative finishing of wall corners

Finishing the corners in the apartment has various options for its implementation. There are also two types of corners that can be finished. For this, a huge number of modern materials are currently used. How the facing of the corners is made, let's consider in more detail.

Varieties of corners in the room that can be finished

Ways to finish the corners are quite diverse. They are based on what kind of corner is made and what material the walls are decorated with (see Wall finishing options).

All corners in the room can be:

• Internal.
• Outdoor.

Most often, decorative trim is performed on the outer corners, as they are most susceptible to rubbing. This is a kind of protection of the main finishing material from deformation along the edges of the finish. Internal corners in the decoration of the whole room and do not require special decoration.

Advice. It is necessary to decorate the internal corners in the room only if it is required by the design of the room from www.24siding.ru.

For example, completely two walls are treated with decorative plaster, and the inner corner is decorated with decorative stone or ceramic tiles. The photo shows examples of the design of internal corners according to interior design.

How can I arrange the outer corners in the room

How to finish the corners in the apartment? Everything is very simple for this today there are a large number of modern materials. You can use ready-made fixtures for this or make the facing of the corner surface yourself.

Finished fixtures are presented in the form:

• Plastic profiles with a straight corner radius.
• Plastic corners.
• Styrofoam or wooden corners.

All of them are quite easy to install and are able to decorate any finish.

Plastic profiles and corners for finishing external corners

Plastic profiles for finishing wall corners can be used both on external and internal structures. They are universal, as they are mounted on the surface of any finishing material.

Advice. For facing internal corners, profiles and corners should be used only if using plaster or other means it is not possible to make the corner perfectly even.

They are moisture resistant and are not able to react with deformation to temperature changes. They are very practical and reliable. Dirt and dust are not absorbed by their surface, due to which there is a quick and easy cleansing.

The dimensions and appearance of such devices are quite diverse. There are the following surfaces of corners and profiles:

• Smooth or rough.
• Glossy or matte.

More:

• The color range of the material is also quite large and it will not be difficult to choose the necessary shade for decorating the surface of the corners.
• The length of the profile or corner is at least 250 cm. The width starts from 1 cm and ends at 10 cm.
• They do not burn, but can only melt under the influence of a temperature of at least 150 degrees. They are used freely in damp rooms and where there are temperature differences.

They are considered environmentally friendly, since various harmful chemicals are not used in the production of profiles and corners.

Styrofoam corners

Very often, the decoration of the corners of the walls in the apartment is carried out with polystyrene foam corners. They are quite practical and durable. The surface of the material is represented by various reliefs. They are very light and will not put extra stress on the entire finish.

So:

• The material does not absorb moisture and dirt.
• Does not burn and can be used in any room with any temperature regime, as they are not afraid of temperature fluctuations.

• They are made of expanded polystyrene, by pressing under the influence of high temperatures. They have a wide range of colors.
• The main advantage of styrofoam corners is that they can be painted.

Advice. With a high passability of the room or with a very small square of it, such corners are not recommended for use in decoration, since they are not resistant to abrasion and deformation. With an inaccurate turn, the structure of the corner breaks quite quickly and simply, thereby spoiling the appearance of the corner.

Finishing the corners in the apartment with the corners of their polystyrene foam is simple and liquid nails are used for this.

Wooden corners for decoration

The method of decorating corners with the help of wooden structures is quite common in the wooden decoration of the room. There are both internal corners made of wood and external ones. They have a very attractive appearance. There may be carvings or other decoration on their surface.

Advice. Since such elements are sold ready-made and their surface is not varnished, it will definitely be necessary to paint it before installation. Such actions are also performed after the installation of the element, but only if the main decoration of the room is not completed.

The price for them is quite high. All this is due to the environmental friendliness of the material. They are very durable and reliable. The color scheme is limited only to shades of natural wood.

Note. To darken the shade of the material, special tools are used that not only change the color of the material, but also give it special strength and moisture resistance.

It is not recommended to use wooden corners in rooms where there is high humidity and sudden temperature changes. The structure of the tree is designed in such a way that it is able to absorb moisture and at the same time deform (cry out and shrink).

How to mount plastic, polystyrene and wooden decorative corners

All work is easily done by hand, and for this you will need to carry out preparatory work on the surface of the corner. They include leveling the corners even before the main finishing of the room.

This is done in two ways:

• The use of drywall.
• Application of plaster.

Let's take a closer look:

• To use the plaster on the corners there is an instruction. In this case, not only the main types of plaster are used, but also metal corners, which are pre-mounted on the surface of the corner and help to make the corner even. The process is quite lengthy and laborious.
• The use of drywall to level any surface is characterized by the speed of work. The material is used for both external and internal corners.

How to level corners with drywall

Finishing external corners with drywall is currently very popular.

There are two ways to mount such material on a surface:

• On the frame.
• Without him.

Advice. Finishing the outer corners of drywall should be done in the same way as the alignment of the walls in the room. That is, if the wireframe method is used, then the angle should also be using the wireframe. This will make the surface around the perimeter of the room in the same plane.

Carrying out work:

• If you opt for the frame method of fastening the material, then initially a crate is made using special metal profiles. It is fastened with dowels to ensure a secure fit.
• Sheets are mounted to the frame with self-tapping screws. The joints of the material are puttied with a small layer and processed after complete drying with sandpaper. Now on the drywall surface, you can perform a fine finish.

Advice. For such work, it is better to prime drywall sheets for a stronger bond between the finish and the surface.

• Drywall finishing of external corners without the use of a frame is considered simpler and more practical. For mounting sheets of material, a special glue is used. It is applied to the back side of the GLK, and the material is pressed tightly.

Advice. Before such work, the surface of the corner must be prepared: cleaned and primed.

• Joints of sheets or open cuts must also be puttied. The surface of such an angle is also primed.
• Drywall has one drawback - its surface does not have an attractive appearance and it is used only for rough finishing.

Advice. Be sure to veneer the plasterboard surface with another finishing material.

Methods for finishing plasterboard corners

Options for finishing the corners of plasterboard are quite diverse. Here you can use various modern finishing materials:

• Ceramic tile.
• Plastic panels.
• Natural or decorative stone and other materials.

Finishing the corners with ceramic tiles is done using:

• A tile cutter that cuts material very quickly.
• Building level, which ensures smooth installation of each finishing element.

• Special glue or concrete mortar.
• Ceramic corners, which serve as the basis for mounting tiles on the corners.

Execution of works:

• Decorative putty masks the seams of ceramic tile masonry. It is possible to use decorative corners on top of such a finish in case of uneven laying of tiles. They are attached to the surface of ceramic tiles with a sealant or a special adhesive. Most often, foam or polystyrene foam corners are used.
• Finishing the corners of PVC (plastic) panels is also quite simple. Only here you can use liquid nails, which are able to firmly fix any material on the surface.

The only thing to consider is that finishing the corners with PVC panels requires additional decoration, since plastic cuts will be visible on the surface of the corner. Small plastic corners are used for such masking. They are glued to PVC panels using special glue or liquid nails. Watch the video on how to decorate corners with decorative stone.

Finishing the corners on the facade and inside the room should provide a long service life of the finish, safety, strength and aesthetics: evenness and beauty. All this can be realized with competent finishing of corners. It is difficult to finish the corners already because they do not just have to be close to the ideal of evenness in all planes. A finished corner is the section of the wall most frequently impacted, and the main condition for a correct corner is sufficient strength. Choose the type of decor for the corner, depending on the type of wall decoration, which can be plastered, wallpapered and paneled. Also, the corners are often trimmed with clapboard. The outer corners of the facade can be sheathed with siding of various types. Much also depends on the material of the wall: it is clear that fixing the corner finish on a plastered concrete or brick wall is not at all the same as finishing the corner of an aerated concrete wall or the corner of an internal wall trimmed with drywall on a frame.

For plastered and sheathed plasterboard walls, special protective plaster elements are used, there are two types of these corners:

• Aluminum perforated for finishing on flat areas; durable and reliable parts, there are options for fasteners with reinforcing mesh;
• Arched plastic corners. Very flexible elements, designed for arches and semi-arches, suitable for surfaces with any curvature.

For the joints of PVC panels, you can buy special plastic corners in a variety of colors, but the sizes are standard.

Corners are glued to the main plaster or putty when applying a rough layer of plaster. When installing the corners, it is mandatory to control the verticality in two planes, use the building level or level. Corners for plastering corners are used not only for interior decoration. On the facade, such protection will not interfere even with light siding, since it not only aligns the corners, but also protects against mechanical damage.

For walls lined with light clapboard or plastic panels - this finish is popular for kitchens, hallways, bathrooms, loggias - corners can be finished in several ways. The easiest is to use a corner profile, a complete siding part. When installing and fastening the corner profiles to the crate, level control is required. The profile is fixed with a construction stapler on the frame, and the siding panel is inserted into a special groove. If there is no profile corner, you can decorate the wall with a plastic panel bent along the center line. If you make a neat longitudinal cut in the plastic, then the panel is bent very carefully, and for plasticity on the front side, the panel is slightly warmed up with a building hair dryer.

Wooden lining is not necessarily adjusted and cut at the corners to the millimeter, and then the flaws are filled with putty to match. Special wooden corners perfectly decorate the corner - both internal and external. The junction of the lining is made quickly and without problems, the fasteners are made with glazing nails, the caps of which are bitten.

Decorative corner trim

To finish the corners of the house with the technology of insulation and plastering "wet facade", plaster corners with perforation and with a reinforcing mesh are used. If the facade is sheathed with siding, then there are usually no problems with corners, since all facade panels are completed with additional elements. But you can protect or repair the corners of a house lined with siding at any time. The corner also serves as a fastener for siding panels, protects the corner from accidental influences and performs a decorative function. Often the corners are decorated in a contrasting color. In addition to decor, the corner performs the following tasks:

• Fixing panels;
• Making panel joints;
• Protection of the ends of the panels from mechanical impact;
• Corner - a guide element when installing siding.
• Mount the outer corners of the siding along the crate, fasten it with self-tapping screws with vertical control.

On wooden walls, decorative finishing is not necessary - a corner chopped from a bar or log is in itself a decoration of the house, moreover, strength is ensured when cutting corners. But another question is to protect not only the design, but also the material. For the corners of wooden chopped houses, where the end of the lumber is the least resistant to water, moisture, insects and microorganisms, protective measures are required - treatments with special sealants and impregnations for wood. The compositions for the ends are used not only on the facade of wooden houses, but also in the interior.

Finishing corners on walls pasted over with canvases or finished with liquid wallpaper is traditional: All external corners of the apartment can be finished with decorative polyurethane, wooden or PVC corners. For classic interiors, polyurethane baguette corners are used, these linings look quite presentable, but more importantly, they provide protection to the corner. Pasting corners with decorative flexible stone is very popular - an easy way to make an exclusive finish with your own hands.

Finishing under the stone can be done with clinker tiles, and natural stone, and artificial - gypsum or cement, stylized as antique masonry. Stone materials and blades are used for facades, and in an apartment, corner finishing with a flexible brick or polyurethane corner is more popular. Installation of heavy corners requires wall preparation - you need to remove all layers of coatings to a solid foundation.

What types of decorative corners are there, methods of application, installation rules and examples of use in the interior. Contents One of the most problematic areas in interior decoration are the outer corners.

It is rather difficult to paste over them with high quality, often the wallpaper rises at the corners, the corner is easily damaged by hitting furniture when rearranging or ...

Decorative corners made of aluminum, wood or silicone on the corners of the walls: how to decorate under or on the wallpaper, what is best to glue and fasten

What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.

Decorative wall corners

One of the most problematic areas in interior decoration are the outer corners.

It is quite difficult to paste over them with high quality, often the wallpaper rises at the corners, the corner is easily damaged by hitting a solid large object when moving furniture or carrying it.

Decorative corners help to solve these problems.

The corner protects the surface from mechanical damage, allows you to hide some flaws in the finish, arrange the transition from one material to another, close the ends of tiles or panels.

Where applicable

There are many options for using corners in the interior. They can be used to decorate both external and internal wall corners. Some difficulties arise when finishing corners other than 90 °, this requires special, so-called. folding corners. To finish the curved surface of the corner, flexible, “arched”, corner profiles are used.

The most common ways to use decorative corners:

• Adjacency of a window slope to a wall. It is extremely rare to see a slope, the near edge of which is not closed by a corner. Their use in this case protects the edge of the slope from damage and prevents the wallpaper from peeling off, which quite often happens at external corners. In addition to the technical, the angular profile also carries an aesthetic load. The use of a white corner completes the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
• Decoration of the doorway. Corners can also be used in the design of the doorway, when the thickness of the wall is greater than the width of the door frame. In this case, additional strips are installed to the door, the junction of the end of which to the wall is closed with a corner element matched to the color of the door.
• Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall finish from mechanical damage, such as accidental impact with a heavy oversized object. It helps to preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies the cleaning of the room. Often, handprints remain on the outer corners, which are easier to remove from plastic than from wallpaper. Properly selected contrasting corners allow you to avoid dullness and monotony of the interior.
• Formation of openings. In interior design, instead of doors, they often leave just an opening, for example, between the kitchen and the living room. The corners serve to decorate and protect the corners.
• External corners of walls tiled with tiles or wall panels. The ends of the tiles are closed with an angular profile, because. they differ in color from the front surface of the tile. If the tile is cut to size, and the cut edge is not sanded, it is easy to cut yourself on such an angle. When mounting the corner on the panel, they close the corner joint. The use of a special corner profile for these purposes is not always convenient, then decorative corners are used.
• Decorating and protecting the corners of gypsum board structures, such as racks or shelves.
• Decorating furniture, framing mirrors. In addition to decorative functions, it protects the edges from chipping.

Varieties according to the materials of manufacture

Corner profiles are made of various synthetic materials, MDF, wood, metal. Its appearance, technical characteristics and scope depend on the material of the corner.

metal

Made from aluminium, stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are divided into polished, anodized and with a decorative coating, usually wood-like, but can also be painted in various colors. They are mainly used in the manufacture of furniture, less often in interior decoration. To protect the ends of the furniture boards, they are covered with a corner with different shelves, one of the shelves of which completely covers the end, the second goes slightly onto the plane. Unpainted profiles are suitable for framing mirrors and glass-covered pictures or posters.

Metal corners can be mounted on walls as a basis for a light false ceiling of the Armstrong type or PVC panels. Aluminum products are attached to the steps as anti-slip pads and edge protection from chips.

Wooden finishing

They are made from various types of wood, including valuable ones. Wooden corners are used to complete the decoration in rooms made of wood, for example, wall cladding with a block house or clapboard.

With their help, the ends of the boards are closed, both on the outer and inner corners. Also, these products are suitable for decorating painted or wallpapered walls. In this case, they need to be painted or varnished. Wooden corners can only be used at strictly right angles, because. they are fragile and with the slightest effort to bend or unbend them can crack.

Transparent silicone corners for wallpaper

If you need to protect the corner and keep the pattern of the wallpaper, stick a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present, because. reduces the risk of a child being injured by hitting a corner. The relative disadvantage of these products is that due to their transparency, they do not hide flaws in the finish.

Polyurethane

They are smooth, with a relief ornament and profiled. Smooth ones are similar to ordinary PVC corner profiles, differing from them in a larger shelf thickness. On the shelves often reproduce a three-dimensional ornament.

For use in classic interiors, polyurethane profiles of a complex section are produced that imitate gypsum stucco molding. On sale are white and painted in various colors, including imitating wood, you can also find painted in several colors, for example, a smooth part under a tree, and an ornament under gold. Due to the complex shape, they require great care in installation. Paints used in decoration fit well on polyurethane.

Plastic colored

Made from PVC. Visually imitate wood, metal surface or simply painted in one shade. The palette of monochrome corners contains approximately 30 shades. If necessary, in the desired shade, you can use special paints white profile. It is used everywhere in decoration, second only to white in popularity. For the design of arches and other curved surfaces, there is a special type of corners - flexible or arched.

MDF corners

They are 2 strips of MDF glued together with a film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are movably fixed relative to each other, the same profile can be used on surfaces mated at different, internal and external, sharp, right and obtuse angles. Usually used when lining walls with MDF panels, but can also be used instead of any other type of corners.

MDF corners are undesirable to operate in rooms with high humidity.

Corner decor in an apartment: how to decorate a room with corners

The options for using decorative corners in the interior design of a room depend on many factors:

• surface material. A white plastic corner glued to the corner of walls lined with clapboard will look ridiculous.
• Finish colors. In no case should a red element be placed in a room designed in pastel colors.
• General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior, a polyurethane, “stuccoed” profile, not suitable for high-tech style.
• Purpose of the premises. In the nursery, silicone corners are perfect. They will keep the corners intact and help protect the child from injury.

Design options for wallpaper

To complete the finish after wallpapering, a profile from any of the above materials can be used. The main criterion for choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are of approximately the same shade, you can match the product to the color of the walls, if different - to the color of the wall that is more often looked at. For example, when finishing the corner between the room and the hallway, it is more logical to choose a profile to match the color of the room.

As one of the finishing options - decorating with a wooden corner, tinted in the color of the doors or the floor with the help of an impregnation stain and varnished. For the same purposes, products made of MDF and PVC, decorated under a tree, are suitable. When decorating a strict laconic interior, metal corners will look good.

The solution for the corners on the slopes: the better to close the corners in the apartment

To complete the finishing of the slopes, corners are used in the color of the slope, almost always white. Often, a sandwich panel serves as a material for slopes, therefore, so that the material does not differ much, PVC corner profiles are used. The width of the shelf is chosen such that it covers the end of the panel or plasterboard. If there are any defects in the finish near the window opening, for example, unevenly cut wallpaper, the corner is chosen so wide that these errors are closed.

The angle between the wall and the slope is usually more than 90 °, in order for the corner to lie flat, it should be slightly “unbent” - put on a flat surface or a pipe of large diameter and lightly press with your hands, moving along the corner.

In the cold season, the profile must warm up to room temperature before work.

Option for decor under the wallpaper

For walls pasted over with wallpaper, an option with wallpapering a corner may be suitable. For these purposes, profiles made of PVC, MDF, wood or smooth polyurethane are suitable. The profile should be of a light shade, because dark can come out from under the wallpaper. Wallpaper is glued on it, the glue is allowed to dry, then, not earlier than the next day, it is mounted on the wall. Wallpaper on the corner should be glued in one piece, of such a size that the wallpaper goes to the inside of the shelves.

How decorative corners are attached

For the installation of an angular profile, various adhesives are usually used; much less often, metal and wooden parts are mechanically fixed using self-tapping screws or nails.

What to glue plastic

For fixing PVC corners are used:

• "liquid Nails";
• acrylic sealant;
• silicone sealant.

When using sealants, the profiles must be fixed for 12 hours after gluing with masking tape. The best result is given by liquid nails, some brands of this glue do not require fixation for the drying time. As a rule, such glue must be applied to one of the surfaces, pressed on the second, then removed, allowed to dry, and then firmly pressed on the part to be glued.

For the installation of polyurethane products, you can also use liquid nails or special glue.

Finishing wooden corners in the apartment

The surface of wooden corners must be protected with varnish or paint. The varnish will allow you to preserve the texture of the wood, the paint applied in a thick layer will hide it. If you need to give the tree some shade, while maintaining the texture, you should use a wood stain or tinting impregnation for wood.

Fasten wooden elements with liquid nails, wood glue or PVA. It can also be attached to finishing nails.

When hammering a nail, the distance from the edge of the part to the nail should be more than 10 of its diameters.

How to stick a plastic corner on the wallpaper

The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the place of installation is well glued to the wall, the wallpaper glue is dry. It is best to wait a few days after wallpapering and then decorate with corners.

How much dries

The drying time of the glue is indicated on the packaging, and rarely exceeds 12 hours. When sticking to silicone or acrylic sealant, it is desirable to keep the elements fixed for a day.

Decorative corners allow you to solve many tasks for decorating a room. They are inexpensive and relatively easy to assemble and dismantle, so it is quite possible to experiment if desired.

Useful video

Corners play a bigger role in the interior than it might seem at first glance. It is enough to look at their uneven or “erased” surfaces, so that it immediately becomes clear: no one will call such a neat finish. Decorative corners on the corners of walls, slopes of door and window openings began to be used everywhere during repairs only in recent years. Until then, the materials that covered the joints simply changed more often than the rest of the finish.

You can appreciate the transforming effect of a decorative element even in an empty room without furniture. According to the type of location, they are classified into two types:

Also, elements are classified into those that are imposed on the outer sides of the corners and those that are inserted into the inner ones. The latter may have semicircular shapes that "soften" the finish. You can make a corner with your own hands, or purchase it in a specialized store. Products are made mainly of plastic, MDF, but there are also more durable metal, stone options. Polyurethane effectively imitates various natural materials: wood, marble, sandstone, brick. Plastic corners are used not only as a decor, but also as a durable finishing element that will outlive wallpaper or other less durable wall surface coating. There is also a “mystical” component to the question. According to Feng Shui, the “junctions” of the walls are considered energy breaks that create an imbalance and negatively affect the perception of the situation, so their edges are decorated with corners, “smooth out” the sharpness.

What are decorative corners for?

Corners most often “touch” people passing by with their shoulders, elbows and carried objects. Accordingly, it is this part of the wall that is erased and scratched more than the rest. To protect the joint from mechanical stress, a decorative corner is attached to it - a special type of finishing materials, a special "overlay". It is designed to perform two functions:

• Decorate the finish;
• Protect the "sensitive" area.

In addition, the decoration using these elements looks neater, and the interior seems finished. With the help of the material, color and size, you can emphasize the features of the style used in the design of the room.

When to apply

The corner part of the wall is covered with decorative elements in several cases:

• If the corner has visually noticeable defects: curvature, "dimples" or protrusions that have not been corrected with plaster;
• When the protruding part interferes with the passage or is located next to the "pedestrian" zone. Accordingly, it will constantly be touched, washed, scratched. Over time, mechanical damage will become noticeable and adversely affect the sensitive wall finish and its appearance;
• If without them the interior does not look complete;
• To prevent the destruction of the outer corner of the building and give the exterior a neat appearance.

The installation of elements usually completes the repair: they literally become the final touch in the design.

Size of plastic corners

The standard size range of PVC corners starts from 10x10 mm and ends at 50x50 mm. Between them, a gradation with a difference of 5 mm is used. Parts of non-traditional sizes are made to order. Between the two guides of the decorative element, an angle of 90 degrees is observed, at which all planes of the apartment should intersect. If you got housing with “curved” walls, then you need to take appropriate measurements and contact the master with a request to make individual details.

Decorative panels for the kitchen

Types of decorative corners on the walls

Corners are universal finishing elements. They are glued in bathrooms, kitchens, bedrooms, balconies, offices and living rooms. Decoration is carried out using several types of elements:

• Arched, for plasterboard partitions;
• For ceramic tiles. The same category includes profile strips for the bathroom;
• Corners made of natural and artificial stone;
• Options made of wood;
• Special guides for siding (exterior design);
• Corners for ceiling and floor "joints";
• Textured options;
• For external and internal corners;
• Corners for openings of doors and windows.

Each of the types is combined with a certain wall decoration and organically merges into specific styles. Not only walls are decorated with corners, but also fireplaces, stoves, furniture, “boxes” for masking communications and pipes.

Arched

Arched corners are used under plaster or glued on top of an already finished surface. "Internal" elements provide smooth straight lines. Corners for semicircular partitions are characterized by increased flexibility, which allows them to be tightly bent to the curved surfaces of the base. If the decorative wall has a strict rectangular or square shape, then the decorative elements can be selected from standard plastic options designed for simple walls.

For ceramic tiles

Ceramic tiles are used for walls and floors in kitchens and bathrooms. At the corners, the tile joints are tightly sealed, they do not let water through, but they collect dust, dirt and grease (in the cooking area). Also, it is these places that are usually used by bacteria and fungi to organize their "hotbed". Microorganisms will not get under properly processed seams, but they may well arrange a comfortable “housing” for themselves on their surface. When cleaning tiles, it is advised to pay special attention to these areas. The overlay of the corners allows you to reduce the scope of work and make the place of convergence of the walls reliably protected from the adherence of dirt particles. In addition, the decorative element will competently mask uneven tile cuts, and options that contrast with the color of the tile will add chic to the room. Corners are divided into two types:

• Internal. They are used to decorate the joints between walls and ceilings, floors, shower cabins, that is, “depressed” corners. Usually they have a convex or concave shape (fillet);
• Outdoor. Used in the processing of protrusions.

Popular plastic for decorating tiles is not used, since the main coating can compete with polyurethane in terms of durability and strength. We also need all the finishing elements to “grow old” in approximately the same way, otherwise, due to the corner that has become unusable, the tile will have to be “disturbed” once again. To decorate tiled surfaces, metal and ceramics are used.

There are so-called "tape" corners. They are made of flexible plastic, are available in "bobbins", have high flexibility, and are easily replaced if necessary. This option is ideal for quick repairs.

For outside and inside corners

Separately, the elements are classified into external and internal. The former are used to decorate protruding surface joints. The latter are used less often in "concave" corners. The latter are not so in dire need of protection, so the overlays are only needed to decorate the finish. Internal corners usually have a semicircular concave or convex shape.

textured corners

Textured options differ in color and pattern. They are usually made of plastic. Often the corners imitate a certain material: bricks, marble or granite surfaces, porous stone, wood (wenge, cork, oak, cherry). A variety of shades allows you to choose a contrasting or background option for a particular interior.

Wallpaper under a tree: types, advantages and disadvantages +50 photos

Wooden

Wooden corners are usually made of thin MDF boards, bamboo, cork or veneer. In terms of lightness, the materials are not inferior to plastic. MDF is flexible, and a decorative layer with a protective film against damage is applied to the surface of the compressed sawdust. In veneer versions, the element is made from thin wood cuts, that is, it is more natural and has a natural pattern. Solid wood corners are denser. Glued to the surface, they will protrude slightly on it.

It is not recommended to use natural wood in bathrooms and kitchens. Before attaching the material, it should be coated with a layer of varnish. Wooden elements are most often made independently. Unfortunately, a cracked corner can be deformed, and crack from a strong blow. For the natural beauty of the decorated surface, you will have to “pay” with a lower service life.

Corners for ceilings and skirting boards

Ceiling and floor plinths at the junctions of individual modules have a very unsightly appearance. No matter how carefully the sections are processed, they will slightly shake the aesthetic picture of the interior. For their disguise, decorative corners are used. In appearance, they differ from wall-mounted options: they look like small overlays that are designed to decorate a small area. For ceiling plinths with stucco molding in classical styles, special corners with monograms are purchased, repeating each bend of the connected lines. On the ceilings, the use of elements is not mandatory, which cannot be said about the floors. Here, skirting boards are constantly in contact with the feet of guests and household members. Their "joints" can loosen, fray and become completely unusable. Corners will save skirting boards from rapid wear.

In design compositions, the lower decorative elements sometimes overlap with the upper ones. This solution ensures the integrity of the composition, so the ceiling and floor plinths often have the same shape, respectively, and the corners for decorating them are identical.

natural stone corners

Decorative elements made of natural stone are usually used to decorate the facades of houses. Due to the strength of the material, they serve as excellent protection against the destruction of the building. However, with the popularization of the industrial loft, brick and stone masonry became an organic addition not only to the exterior, but also to the interior of the house. Such corners will necessarily "protrude" slightly above the surface. You should choose flat stones that will provide a neat look for the whole structure. They are fastened with cement mortar, that is, the corner will be monumental and installed for a dozen years. Elements are combined with plasterboard walls, embossed plaster and wooden clapboard.

artificial stone corners

Artificial stone corners are considered cheaper and more practical options. As a rule, imitation is made of plastic. It repeats not only the color, but also the “rough” texture of the surface. PVC is flexible, often goes beyond the "boundaries" of the corner and crawls onto the wall itself. This solution is used in order to create the illusion of natural scenery, because real masonry is usually not adjusted to the ruler. Combine a corner with wallpaper and the same plastic panels.

It is important to know. The most budgetary imitation of stone on the corners are dense wallpapers. Curly pieces are cut out of them along the contours of the pebbles and glued to the joint. Such an element will not protect the surface from scratches and damage, but it will cope with the decorative task.

Options for using a corner profile for finishing corners

The corner profile is used to decorate the following elements:

• "Natural" joints between walls that are in a vertical plane;
• Door and window slopes;
• Places of "convergence" of ceilings, floors and walls in horizontal planes with a concave shape;
• Corners of decorative partitions, including arched openings;
• Joints between shower cabins, fireplaces and other "monumental" (not involving movement) interior objects and walls, floors.

Mirror tiles in the interior: application ideas

A decorative element can "smooth out" any "seam" at the junction of finishing materials. If earlier it was necessary to carefully process the sections so that they retain a beautiful aesthetic appearance, now irregularities and chips are allowed on them, which the corner will mask.

Finishing the slopes of doors and windows

Double-glazed windows usually come with special corners that complete the installation of the window. Door sets also often include trims and architraves. If the corners are left without additional protection, then you will have to pick up and glue it yourself. The element will protect the slopes from damage and smooth the junction of two different materials. For example, the end of the wallpaper will begin to wear off and peel off over time. No matter how smoothly you cut the finishing material on the slope, it will look untidy without additional coverage. In doorways, slopes can be scratched by furniture that is carried through them.

The best option would be to use PVC corners. If necessary, it is easy to replace, and the surface texture can imitate any natural materials. By choosing a particular shade, you can create an illusory transitional border between the color of the wallpaper and the window frame or doorway. Less commonly used corners made of veneer or bamboo.

arched doorways

Arched openings, as a rule, have one of the classic forms: with a semicircle on top. Not every material can repeat its contours. For example, solid wood corners can only be used to decorate straight lines. Smooth transitions are decorated with elements made of flexible plastic, MDF, veneer or bamboo. All of the above options will easily follow the contours of the arch, and complete the design of the doorway.

How to stick a plastic corner yourself

In addition to decorative corners, you will also need a fastening composition. For narrow elements, it is not recommended to use glue, the excess of which cannot be removed from the surface without a trace. The joint before carrying out the procedure must first be cleaned of dirt and residues of wallpaper or protruding pieces of finishing material. No corners will save an excessively uneven and bumpy surface. Then the wall is measured. Measurements are accurately transferred to a piece of corner. It is better to cut the material with a hacksaw with fine teeth. Do not forget about the joints between the corners themselves (in doorways, windows): two straight lines should end with cuts at an angle of 45 degrees. The “wrong side” of the prepared material is smeared with glue and applied to the wall. Hands firmly press the corner to the surface and hold until the fastening composition "grabs"

Conclusion

There is another type of decorative corners that decorate furniture (sofas, wardrobes, beds, cabinets). It is used, as a rule, to protect the joints of MDF or chipboard boards, which are especially sensitive to damage and begin to crumble over time. Special silicone corners save the little fingers of the household from constant impacts on these surfaces. In interior design, the use of these elements usually completes repairs. Their installation is akin to the last strokes of a brush on an almost finished canvas, when the artist, moving away from the easel, evaluates his creation with a critical eye and corrects individual areas so that the composition becomes complete. Decorative corners have become an indispensable element in the design of the room, which emphasizes its accuracy and beauty.

When furnishing a house or apartment, they often face the problem of what to put in a corner or how to occupy it so that the place is not empty and looks beautiful. If you think about this issue correctly, then this space can be used really efficiently.

We offer a few ideas on how this can be done. For convenience, we divide them into subparagraphs, based on the location of the corner:

• In the room
• In the hall
• In the kitchen
• In the nursery
• In the bedroom
• In bathroom

Shelves

Several small shelves located in the corner of the room will immediately perform both a decorative and practical function. Place photos or figurines on them and see how much your room will change.

Corner for creativity

Furniture can also be placed in the corner if decor and space allow. This desk or work desk is ideally placed, close to windows on both sides, providing good lighting and making it possible to both work and read in a pleasant atmosphere.

Small corner table

Such a table is not intended for writing or eating, it, in fact, has the role of a shelf for several photos, a table lamp, a vase of flowers or similar decorative elements.

Reading nook

Another great idea is to create a reading nook in one of the empty corners of your home. Find a sufficiently lit corner (closer to the window) and equip it with a pouffe and a floor lamp. In winter, add to this a warm soft blanket and the perfect place to spend your free time reading your favorite books is ready.

Like as a photo - in this article

Another photo idea for setting up a reading or thinking corner. You can just put a chair, or you can also hang it with curtains, shutting yourself off from the whole outside world for a while and plunging into your own.

An armchair in the corner near the window also makes a good place to read. Just a fabulous place to read and relax. Here you will have to make more efforts than just laying a pouf, but it turns out incredibly cozy.

Home cinema.

The corner of a room is actually a very good spot for a TV because it allows you to see it from almost anywhere in the room. Arrange armchairs and sofas around and enjoy watching movies and TV shows.

TIP: if you don't have a special corner TV cabinet, just put it in the corner on the bedside table, the end result is the same.

In this case, in the corner we put not a TV, but a sofa of a special shape. The whole family or a group of friends will fit, stock up on popcorn and enjoy watching.

Mirrors

Beautifully framed mirrors can also do a good job of filling up an empty corner space in a room. This will give the room more light and a cozy atmosphere.

Hangers

The hanger is very helpful when you need to get something from the top shelves of the closet, with it you do not have to risk your life and put a chair on a chair to get what you need. But its storage in the apartment takes up a lot of space, and the view is not very aesthetic.

But this idea will solve all the problems: use the steps of the stepladder as a hanger for blankets and its appearance will immediately change and you can take blankets as soon as you want to wrap yourself up and keep warm.

Library

Pay attention to how effectively this corner is made, all the shelves complement each other perfectly. Standing in one place, you can reach almost any book. Of course, not many people have a piano at home, but even without it it will look very good.

Tea corner

It is very convenient to have a corner bench or a sofa in the living room, put a small round table there, and you will get a cozy place for tea drinking or pleasant conversations.

Plants and vases

Plants, especially large ones, are a very beautiful decorative element and are suitable, in fact, for all rooms. However, they take up a lot of space, so the corners are perfect for them. Plant a flower in a beautiful large vase and it will wonderfully complement your home interior.

Floor lamp or floor lamp

A floor lamp placed in the corner will gently illuminate the room, creating a cozy homely atmosphere in the evenings.

Empty corner in the hallway

Photos on the wall

Fill an empty corner with paintings or photographs, organize a small art exhibition at home. It will definitely please the eye more than bare walls.

book shelves

Corner shelves with books can be placed not only in the hall, but also in the hallway. Of course, a full-fledged library will not fit here, but you can arrange your favorite books and figurines. More ideas in this article!

Brought finds

Make a mini museum of your travel adventures in the corner of the hallway: surfboard, large wooden statues, paintings, photos or posters, do not let it all gather dust in the closet.

In the kitchen

Corner cabinets

We wrote a separate article about - 30 ideas, we will open some tips here. Such a wardrobe is very practical and beautiful, while it visually practically does not reduce the room. You can arrange cups, vases and various decorative elements on the glazed shelves.

Round table

A small round table with four chairs placed in the corner is a good option for apartments with small kitchens. A great economy idea would be to use old chairs or a stool. - see here.

In the nursery

wigwam

In a children's room, you could use a corner as a place for a wigwam. Kids love tents, but putting it in the middle of the room would take up too much space, and the corner fits just right.

little stage

Having hung two beautiful curtains, the corner miraculously turns into a small stage. Here, children can play, develop their talents, or even arrange a small home theater.

In the bedroom

Double bed

If your bed is in a corner, then make a double headboard. This is practical, because during sleep, the soft back will prevent you from accidentally hitting your knee against the wall, and it looks more symmetrical and beautiful.

Table or nightstand

A small table or bedside table, placed in the corner near the bed, is a convenient place to put the watch or earrings taken off before going to bed, as well as the phone with the alarm turned on, a glass of water and a book that you read before bed.

In bathroom

Corner bedside table

Bathrooms in many apartments are made so tiny that it is especially important to use really every possible space in them. A corner bedside table will help organize the space as best as possible, place all cleaning supplies and clean towels.