Applying textured paint with your own hands. Features and types of textured wall paint

Modern manufacturers building materials and repair materials offer a variety of modeling and design tools interior spaces. Textured paint is no exception.

Textured (structural, textured, embossed) paints allow you to create a special original texture and surface structure, like internal surfaces walls and facades.

This is explained by the fact that embossed wall paint is a thick, coarsely dispersed mass, which, in addition to acrylic, includes inclusions of various structures (drop-shaped, scaly, and so on) due to which the necessary texture is created.

Thus, structural wall paints are a godsend for those who want to update the design of their home quickly, in an original and quite simply.

Textured wall paint in the photo:

Structural paint application methods

The final appearance of the painted surface largely depends primarily on the composition of the paint used and the texture filler. However, the way the paint is applied plays a very important role in obtaining the desired result.

As a rule, structural paint is applied with a roller, spatula, sponge or brush, that is, in the traditional way.

But pneumatic spraying of embossed paint also takes place. Ultimately, not only appearance the surface to be coated, but also the consumption of the starting material.

So, how to apply textured paint:

brush painting

For this method, it is better to choose a wide brush. On the prepared surface, the paint should be applied in large strokes in any direction. To get a more or less uniform texture of the wall, you must first perform horizontal and then vertical strokes. It is also possible to apply arbitrary patterns on the wall with a brush.

Roller painting

When applying relief paint with a roller, two conditions must be met: there must be at least three rollers: two of the same size and one of a smaller size. Two rollers of different sizes are involved in the main painting.

They must be completely lowered into the source material and gradually applied with vertical strokes to the wall, first with a larger tool, and then, if necessary, correct inaccuracies with a smaller roller. At the end of the work, be sure to check the thickness of the applied layer and, where there is too much paint, remove it with a clean, dry roller.

Spray surface coating

It should be noted that structural paint is available in a spray gun. It should be applied with care, because the thickness of the application with this method is difficult to catch. Therefore, before you start applying paint to the wall, it is worth trying to spray paint on a piece of wood or drywall.

Spatula application

A spatula as a tool for painting surfaces with textured paint is the best suited when using thick embossed paint with a coarse filler or, if you want to get a non-uniform surface, and single various volumetric strokes. The spatula can be soft for a more “delicate” texture and hard, respectively, for a rough relief.

Sponge application

The photo of applying textured wall paint with a sponge speaks for itself. This is an opportunity to bring any of your creative ideas to life. The best way satisfy the creative hunger for those who want to draw.

Also, applying paint with a sponge makes it possible to use a variety of stencils when painting.

The depth of the texture in this case depends on the "grain" of the sponge.

Do-it-yourself textured wall paint

Relief paint can be prepared independently at home.

For this it is necessary acrylic paint for appropriate works (external or internal) mix, for example, with granite crystals. These crystals are sold in construction stores in sachets and will help to give the painted surface the look of a sparkling mineral.

If you add special sand to the acrylic paint to give relief, the wall will take on the appearance of a surface painted with colored sand. You should not experiment and use the sand that can be found on the beach or by the river.

It is also possible to combine different structures. For example, to the main large relief applied with a brush, add small bright inserts of sand islands or stencil pictures applied with a sponge.

Embossed wall paints: pros and cons

Pros:

• Huge variety of textures and colors
• Simplicity and speed of application
• The ability to hide irregularities and various damage to the walls

Minuses:

• Structured finishes require 15-30% more paint than plain finishes.
• Re-staining is possible only after the removal of the first

More interior photos:

The ideal alignment of the walls for painting is a long, tedious and rather costly job, from which many try to get away, using drywall and losing part of it. usable area. But now you can do it easier, saving not only time, but also money. This will allow you to do textured painting of the walls with your own hands. special formulations, which will be discussed here.

Textured wall paint is produced in the form of a thick viscous mass based on an acrylic, mineral or silicone binder, which includes fillers that give the surface a relief. It can be colored and white. Mineral compositions for finishing facades can also be sold in the form of a loose mixture, which is diluted with water.

For reference. In the white version, mainly water-soluble paints are produced, which can be tinted independently using special pigments.

The walls already finished with it are difficult to distinguish from those on which decorative plaster and ordinary paint have been applied. That is, the effect is almost the same, but do-it-yourself textured paint is applied much easier and faster.

Types and sizes of filler

According to the type of particles included in the composition for density and relief, texture paints are divided into compositions with the following fillers:

• Granite or marble chips;
• Crushed gas silicate;
• Quartz sand;
• Metal particles with reflective properties;
• Sawdust;
• Natural and synthetic fibres.

They may also include modified starch and other thickeners, as well as special pigments that give the coating the effect of silk or mother-of-pearl. In shape, these particles are most often scaly or drop-shaped.

And the depth and severity of the future relief depends on their size:

• Fine-grained paints include paints with a filler diameter of up to 0.5 mm;
• To medium-grained - 0.5-1 m;
• To coarse-grained - 1-2 mm.

Application area

Like all other paints and varnishes, textured paints, depending on the composition, can be used for both exterior and interior work. Therefore, before buying, you need to familiarize yourself with the recommendations of the manufacturer.

As for the type of base on which they can be applied, it is:

• Wood;
• Plaster;
• Concrete;
• Brick or stone masonry.

Manufacturers and prices

Despite the fact that this material is relatively new, texture wall paints are produced by many manufacturers.

Among them, the following brands are especially popular:

• Ecoroom;
• organic;
• Clavel;
• amourcoat;
• GALAMIX;
• Bayramix;
• Balticolor and many others.

The price depends on many factors: the type of binder and filler, the presence of unique additives, color, manufacturer. It is rather difficult to voice the average cost, since the spread is large.

For reference. For example, a 20-kilogram can of Prorab Sandeco textured paint from Bayramix costs about 1,500 rubles. The same volume of SuperDecor paint from Balticolor will cost 4,000 rubles. And Arabesco from Clavel is already 9400 rubles.

If you want to save money or create something of your own, there is a way to make textured paint with your own hands. To do this, you need to add clean sawdust to acrylic paint, granite chips or quartz sand. The latter are sold in hardware stores. But select the initial composition carefully, taking into account where you plan to use it - on the facade or in the interior.

Stages of applying textured paint

Before applying paint to the walls, they must be leveled. But not to perfect smoothness - but simply by level. Small irregularities and cracks can be left untouched: the composition is applied in a fairly thick layer, it will perfectly hide everything. In addition, the relief surface visually masks small flaws.

Note. Of course, the surface must be durable, without crumbling and falling off pieces. And to ensure good adhesion, it must be treated with a primer. deep penetration. Preferably on the same basis as the paint itself.

Decorative work on painting surfaces with textured paint is divided into two stages. This is preparatory stage and the application of dye.

Training

This work is not difficult, but mandatory.

It will mainly determine the durability of the coating:

• It is necessary to carefully check the treated wall for any deformations, even the smallest ones, which over time can damage the integrity of the textured layers.
• A prerequisite is the removal of the old surface coating, complete cleaning walls and getting rid of possible defects. The maximum allowable height difference is about two millimeters.
• To improve the adhesion of the coating to the work surface, it is worth covering it with a primer (see Primer for walls for painting - types and tasks), created on the basis of acrylic. A row of soil must be applied evenly, and color scheme must exactly repeat the note of the selected paint. After applying the primer, you need to wait for its complete drying, which will last from three to five hours.

Application

For plastic, this finish is not used, the plaster simply will not hold, but when applying, you must adhere to a certain set of rules:

• Before the start of painting work, the container filled with the prepared mixture must be brought to a degree value that is typical for a room.
• Next comes the process of mixing the composition, which is best done with a special construction mixer.

Attention: It is allowed to add water to the composition of the paint, the amount of which should be two or three percent of the total volume of the dye.

• You need to know exactly which texture will be ideal. Already in accordance with this, it is necessary to supplement the mixture with the necessary proportions of special additives. The overall consistency will depend precisely on how much of such a filler will be taken for the total mass.
• As a rule, “texture” is applied in 1-2 layers in stages. This will be enough to achieve the desired result. After finishing the work, you will have to wait a day for the paint to dry completely.
• Despite the fact that hardening occurs after a quarter of an hour, it is necessary to allow the paint to dry completely. It is then that it will acquire the desired texture and shade, and the interior will not look unfinished.

Tools and resulting effects

The texture of the finished wall will depend not only on the type and size of the filler, but also on the method of applying paint to the wall. There are formulations that come with clear instructions on how to proceed. But for most embossed wall paints, you can use different ways and tools and get different textures.

• Brush or brush. After applying textured paint to an area of ​​1.5-2 square meters a wide and rather rigid brush is taken, with which lines are applied to the surface in any direction: vertical, horizontal, cross, wavy, etc.

• Comb. With it, you can get a more pronounced and rare relief, using the same method.

• Putty knife. Im on the processed first thin layer the surface is applied with rough, rare strokes of paint, which are shaped into a stone. This is perhaps the most difficult self-produced way.

• An ordinary roller with a fur or foam rubber coat (see). Rolling it over fresh paint, you can get a uniformly rough surface, the relief of which will depend on the type of fur coat.

• Figured roller. This is a roller with an embossed surface, with a convex pattern that is imprinted on freshly applied paint. To work with it, a section of the wall must be processed to the full height from floor to ceiling so that the pattern is not interrupted.

• Natural sponge, crumpled paper or cloth. All these devices are used according to the principle of facing - that is, they stamp the surface with “bumping” movements, as it were.

Even yours can become a tool own hands in rubber gloves. You can draw patterns with your fingers or set prints over the entire surface.

When working with textured paint, the main thing is not to be afraid to experiment. For example, you can apply brush strokes different color and then blend them with a large soft sponge.

But no more than 15 minutes are allotted for any decoration - then the paint begins to dry. Therefore, it is recommended to apply it in small areas. Or work in tandem with an assistant.

Advantages and disadvantages

This material has a lot of advantages:

• The ability to mask various minor defects and uneven walls without puttying them;
• Creation of a homogeneous seamless surface;
• The possibility of finishing with your own hands with a spectacular result and saving money on the services of specialists;
• Resistance to mechanical damage, moisture resistance, vapor permeability;
• Absence of harmful toxic substances.

However, it also has disadvantages. First of all, this is the need to completely remove the coating if in the future you want to change the finish to a smooth interior paint or wallpaper.

And a big expense. For 1 sq.m. the surface of such paint may require from 600 grams to 1.5 kilograms. What affects the final cost of finishing.

Conclusion

If you've never worked with textured interior paint, it's best to practice on a piece of plywood or an inconspicuous area of ​​the wall first, getting your hands full and experimenting with the texture. And to understand the technology of creating a particular relief, carefully watch the video in this article and other training and demonstration videos.

The disadvantage of this method is that we reduce the internal area of ​​the rooms.

After that, putty, wallpaper, oil paint or wall panels are applied to the resulting structure.

Recently, textured wall paint has gained popularity, which allows you to level surface irregularities up to 2-3 mm.

It can be applied to any surface, and when using special additives, it can be used both for and for exterior painting of building facades.

The relief and pattern is formed through the use of fillers.

Types of textured wall paint

Textured paint is a thick dispersion mass, the basis of which is a polymer.

The relief is formed by special fillers. Manufacturers offer ready-made water-soluble paint, usually white.

Various shades and colors are obtained by adding colors (special pigments). Substances based on mineral binders are sold in powder form. They are simply diluted with water according to the instructions, the main area of ​​\u200b\u200buse is facade decoration.

The use of polymer binders allows the surface to withstand mechanical and climatic external influences.

Classification of paint by type of surface

According to the type of surface, textured wall paint is divided:

1. Relief. These are paints with the help of which numerous and varied structures are obtained, which are formed due to various fillers. As a filler, most manufacturers use natural quartz chips. Apply paint with a flat spatula.
2. Marseille wax. These paints imitate the structure natural materials(cork, stone). To protect against moisture and give depth to the color, the paint layer is coated with wax. Widely used in restaurants, swimming pools and offices.
3. Atacama. The paint has a velvety surface with excellent reflective effects. The effects appear as a result of the use of metal filings, the relief is formed by quartz sand, and the base is acrylic.
4. mizuri. The basis of the paints is acrylic, and modified starch is used as a binder, all this is diluted with water. With the help of these paints, both a smooth surface and embossed textures are created.
5. Pearl Blend. Distinguished by its unique pearl luster. Pearlescent pigment is finely ground and added to the acrylic base with the addition of water. The effect of wet silk is obtained by applying the finished mixture with a roller, in different directions.

As we understand, a competent choice will allow you to create an original and unforgettable design of your home with your own hands.

By size and type of filler

To create relief and density, the following fillers are used:

Particle shape

1. Drop-shaped.
2. Scaly.

According to the particle size of the filler

• Fine-grained - particles have sizes up to 0.5 mm.
• Medium-grained - particles have sizes from 0.5 mm. up to 1 mm.
• Coarse-grained - particles have sizes from 1 mm. up to 2 mm.

Key Benefits of Using Textured Wall Paint

Thanks to a balanced multicomponent composition, we have a number of advantages:

1. The composition of the paint includes only environmentally friendly components. The composition is completely hypoallergenic.
2. High resistance to moisture. Possibility of use in a bathroom, a bath, pools, kitchen.
3. Easy to wash and clean painted walls.
4. The paint does not absorb the smell and is not afraid.
5. The coating is resistant to mechanical stress, ultraviolet radiation and frost.
6. Can be used on almost any surface
   • Masonry.
   • Brickwork.
   • Concrete surface.
   • Wood.

1. It is enough to apply one layer, does not require fixers and additional operations.
2. No special skills are required to use. Can be used for interior and exterior walls.
3. At the colors of this type high elasticity, which allows them to be used in new buildings, and when the building shrinks, the surface does not deform.
4. Large selection of colors, and also has good decorative properties.

disadvantages

The disadvantages include 2 factors:

1. The first factor is that if you decide to make repairs, you will have to completely remove the textured paint from the wall, and this is a laborious process.
2. The second factor is the high cost. For a high-quality drawing, consumption per 1 sq.m. is from 650 gr. up to 1500 gr.

It should be noted that paint consumption depends on the pattern on your wall surface.

It is also possible to use special varnishes to increase the effects.

That is, the shade, and the color of the picture will look different depending on the light.

How to paint walls with textured paint?

Surface preparation

We start with the preparation of the surface of the walls, as mentioned above, chips, cracks and irregularities up to 2-3 mm are allowed. The most important thing is to align the walls in a plane, usually a building one is used for this. Moreover, the very texture and relief of the future paint will visually hide most of the defects.

We process the prepared surface. You should wait for the primer to dry completely, which is about 4-6 hours to a day. The rate of drying of the primer is affected by humidity and room temperature. There are times when two coats of primer are required.

Paint preparation

The next step is the preparation of the paint itself. We bring the paint into the room for several hours, so that it takes the ambient temperature. Some paints have temperature and humidity restrictions, so read the instructions carefully before use.

If you want a smooth surface of the coating on the wall, then you should add ordinary water, no more than 1% of the paint volume. If relief is required, then add fillers. To give the desired color to the paint, add color. Regardless of the added components, the entire volume should be thoroughly mixed to obtain a homogeneous mass.

Mixing should be done only with a construction mixer, and not by hand.

Application

The layer should be thick, but not more than 1.5 cm. Sometimes paint is applied in two layers. The second layer is applied only after the first has completely dried.

Complete drying of the layer occurs after 24 hours. We apply paint in small areas of approximately 1.5-2 sq.m.

And do not forget that the setting of the paint on the walls already begins 15 minutes after application. In these 15 minutes, a decorative pattern should be applied.

Drawing tools

For application decorative pattern you can use the following tools:

Lacquering

After applying the pattern and completely drying the paint layer, the surface should be varnished or waxed. This is done so that the color and texture last for a long time.

Manufacturers and price

This is enough new material on the construction market. But, despite this, there are quite a lot of manufacturers of this product.

The price depends on the manufacturer, filler, binder, color, presence of special additives in the composition.

Now we will voice the most popular brands:

• Ecoroom,
• Bayramix,
• amourcoat,
• organic,
• Balticolor,
• Clavel,
• GALAMIX.

The process of working with this material is not complicated, however, it differs somewhat from the application technology. regular paint. Before proceeding with the use of textured paint, we recall the competent pre-treatment of the surface.

Textured paint is applied in a thicker layer compared to conventional paint, therefore, the requirements for surface strength are also increased. It should be dry (no more than 2% humidity), not dusty, without foreign deposits.

All areas that impair adhesion, such as old cracked, crumbling layers of finishes, whitewash and other paint surfaces, should be removed. If the main cover is Oil paint, the wall should be examined for delamination and swelling. Where the paint is well preserved, its surface must be sanded: for better adhesion, it should become matte.

If, after removing the base coat, you have an ugly wall with rough drops, it should be lightly puttied to even out the irregularities at least to a level of 2 mm. Large cracks are recommended to be reinforced with mesh.

The finished surface must be clean, dry, not "chalky" and without signs of mold.

Tools you will need:

1. Drill with mixing attachment.
2. Spatula or trowel.
3. Rollers to choose from: smooth, rubber textured, foam rubber, porous.
4. Decorative brushes.
5. The brush is flat.
6. Masking tape.

Wall putty

The quality of the study should be set, however, according to the situation: depending on the desired relief, the paint is selected and the thickness of its layer is set. The thinner it is, the more carefully the surface should be prepared.

Wall primer

Its purpose is to improve the adhesion between the wall and the paint. Refer to the materials at acrylic base, for example, Galamix-53 and Galamix-51 or "Universal". If the coating crumbles easily, you can use the special strengthening primer "Profi" or apply 2 layers of the usual mixture. Areas affected by mold and fungus are pre-dried and treated with an antifungal primer, for example, Akkurat 115.

After drying, the primer creates on the surface thin film filling and smoothing the pores at the base of the wall, making it easier to apply finish coat, increases its durability and saves on material.

Depending on the manufacturer, temperature and humidity in the room, the primer dries for about 6 hours, after which you can proceed to the finishing stage.

Painting walls with textured paint

Before use, mix the textured paint thoroughly, diluting it, if necessary, with water. Part of the water should be no more than 5-10% of the total mass, otherwise the beauty will become fluid and will not hold its shape. The paint is mixed manually or with a drill with a mixing attachment at low speed for no more than 2 minutes.

Note: material consumption depends on the manner of work, the chosen tool, the degree of preparation of the wall. To get an idea of ​​the consumption, make a test area on the work surface.

How to apply texture paint:

1. The first step is to define clear structural boundaries for the top, bottom and trim width using masking tape. Also pay attention to the protection of surfaces that are not to be decorated.

1. Lighting - important factor successful work. It should be sufficient and as close as possible to future permanent lighting in terms of intensity and angle of incidence. The fact is that the relief of the paint is “read” precisely due to the direction of the light, and proper lighting will help create the desired effect on the wall. Both daylight and electric light should be considered.
2. If during work you make technological breaks, containers with paint at this moment should be tightly closed.
3. The paint is applied with a spatula, roller or spray. If you use a roller, then it should be smooth or with a hard short pile up to 1 cm long. The spray nozzle should be at least 3 mm in diameter. It is recommended to keep the roller in the same direction during the entire application stage in order to form a consistent relief.

1. If you use a spatula, then the pattern will be applied in the next step, and not simultaneously, as is the case with a roller. Enough is applied to the spatula a large number of mixture, which is applied with a layer of 3 mm, and then, within an hour and a half, you have the opportunity to experiment with texture, correct and add, change rollers and other tools for creating relief.
2. It is correct to start work from the corner of the plane to the opposite corner.
3. If necessary, painting with textured paint is carried out in two layers, while the second layer should be applied after the first has completely dried, that is, after 3-10 hours.
4. To avoid the formation of joints, work within the same plane should occur in one approach according to the “wet on wet” principle.
5. After work, the tool must be rinsed immediately with water.
6. The time for complete drying of the paint under normal conditions is 24 hours. It acquires final hardness and uniform polymerization only after 14 days.

Remember: the pattern and the resulting texture depend on the material of the roller and the speed of its movement along the wall.

Getting a drawing

Method 1. Textured paint is applied to the wall, as in the photo, using a trowel or spatula with a layer of 2-3 mm. Then the surface is treated with the selected texture roller, by rolling it from the bottom up.

Method 2. The paint is applied in the same way as the first one, an adhesive spatula is taken with teeth and a relief is given with wave-like movements. You can describe semicircles, waves, layer them and change direction.

Method 3. Relief "Bark beetle". Texture paint is applied in a thin layer of 1 mm using wide spatula. Then, pressing it tightly against the wall, the excess mixture is removed, as a result of which the large components of the fractions leave a path behind them.

Method 4. The wall is pre-painted with paint to match the texture, or, conversely, with a contrasting color. In this case, when scratching, the bottom layer will show through. For example, lilac texture paint is applied to a yellow base. It is also worth experimenting with shades of the same color: light gray and darker, powdery and rich beige.

You can additionally decorate the finished textured wall by mixing an ordinary transparent varnish with a special creative paste. With the help of this technique, it will be possible to notice how the shade of the wall changes from a change in the angle and intensity of lighting.

Technical features of the paint:

1. It is forbidden to mix anything and add it yourself to the paint.
2. Do not apply the material to the facade in particularly hot or rainy weather, or under direct sunlight.
3. At street work It is necessary to check the serviceability of storm and drainage facilities.
4. Condensation must not form on the work surface.
5. The ambient temperature must be between +5°C and +30°C.
6. At internal works good ventilation should be provided.

Tip: when painting the facade, it is better to choose pastel shades of texture paint: firstly, it is in harmony with environment, and secondly, from prolonged exposure to light, any bright color burns out.

Prepare exactly the amount of material that is guaranteed to be enough for one layer. If you have more than one container, make sure that the color of the mixture is the same in all of them. Applying textured paint is a crucial step: use the tutorial videos and consult with those who already have experience in this.

When creating an exclusive interior space great solution is textured wall painting. Such a finish does not require special skills or sophisticated equipment, all work is carried out exclusively by hand, which allows you to show imagination and realize design solutions. For painting, special textural and decorative mixtures or traditional compositions applied in a certain way are used.

Any paint can be used traditional varieties compositions, but the best result is achieved when choosing special options, which are divided into decorative and textural.

Decorative varieties include:

• Mother-of-pearl. Imitate silk fabrics.
• Mosaic. Due to the application with a spray gun, an interesting texture is formed.
• Velor. The inclusion of hard particles gives the coating depth and softness.

Combined decor gives good results

But special attention texture paints deserve, which make it possible to obtain a relief surface. This category includes the following options:

• Marseille wax. Allows you to create amazing custom structures.
• Misuri. The resulting layer may have a well-defined relief.
• Atacama. The necessary texture is achieved due to sand and metal particles in the composition.
• Mixes with natural fillers. It can be sawdust or quartz chips.

Each type of composition gives its own texture.

To enhance the effect, varnish or wax is used.

On a note! In addition to creating a decorative relief, this method of painting allows you to hide minor wall defects.

Options for obtaining the desired invoice

To obtain an unusual relief, there are various ways using a variety of tools and fixtures.

In general, any suitable materials and tools. Even with your hands you can create an interesting relief.

If desired simple tools you can create genuine masterpieces on the walls

Advice! All created effects recommended to test for small area plywood or cardboard, this will give an idea of ​​​​the final result.

How to apply paint

To get it right, the process is broken down into three standard sequential steps: preparation, grounding, and painting.

Training

Action algorithm:

The surface must be smooth and without defects. If you need to reinforce visual effect, then the required geometry is pre-assigned to the base. An example is a small wall slope from top to bottom, which will be an excellent addition to horizontal straight or wavy stripes.

Primer application

Priming is an important procedure that ensures reliable adhesion of the applied composition. The deep penetration solution is laid with a roller, it is necessary to process all areas. The number of layers varies from 2 to 3, before applying the next coating, wait for the previous one to dry completely.

Ground application is mandatory procedure with any artistic finish

It is better to choose the composition of a well-known and trusted manufacturer, this will guarantee a good result.

Coloring

To get beautiful textured walls exclusively with your own hands, you must follow some rules, especially when using special texture compositions:

• Preparation of the solution is carried out exclusively according to the manufacturer's instructions. It is not recommended to dilute such mixtures, only if necessary, but the amount of thinner should not exceed 1-2% of the total paint volume.
• The surface is divided into conditional sections. Due to the rapid setting of the composition (15 minutes), the mixture should be applied to an area of ​​​​no more than 2–3 m 2. This will create the desired relief.
• The design is thought out in advance and the necessary texture is selected.

If any pattern is provided, then marking is performed before applying the compositions

General painting technology:

1. The base coat is applied first. For this, a water-based acrylic compound. The need for such a layer is determined individually.
2. Then the base is laid. The desired relief is formed with a suitable tool.
3. After drying, the surface is covered with wax or varnish.

There are 4 basic ways to apply texture to the wall

You can simplify the work by inviting a partner who will be responsible for the texture or application of the composition.

Should know! Lighting is an important detail. You should paint with exposed light sources, this will allow you to evaluate the resulting texture and, if necessary, make adjustments.

To get an excellent result, staining should be carried out in good light.

Methods for applying textured paint

Exist various methods, allowing you to realize the ideas of decorating a house or apartment.

This technology includes two methods:

With a regular comb, you can apply a very original pattern.

In both cases, at the final stage, the surface is treated with a transparent or matt varnish.

stone effect

This finish allows you to get a textured coating that imitates stone cladding. Scheme of work:

Each method must be adapted to specific situation, this will allow not only to realize the idea you like, but also to achieve individuality.

VIDEO: how to apply textured paint on the walls with your own hands