How to paint walls with a patterned roller. wall painting technology

Painting the walls in bright stripes, applying colorful flowers to them, or making them look like picturesque paintings sounds much more interesting than just pasting bare walls with wallpaper that will soon have to be replaced. If you agree with this opinion and are thinking about making repairs in the apartment yourself, we invite you to get to know better what decorative wall painting is with your own hands and how it is done.

Why is paint better than wallpaper?

The huge advantage of paints over wallpaper is that:

waterproof paints can be easily washed and there is no need to repaint the walls if they get dirty,
there are much more lines of their service than paper wallpapers,
a wide palette of colors and shades allows you to choose exactly the tone that best suits the interior of your home,
they easily lie on the surface of the walls, regardless of their base,
water-based paints have a natural composition, therefore they are not contraindicated for use in a house where allergy sufferers live.

And there are many more such advantages. But, perhaps, one of the most important for all handmade lovers is the fact that with the help of paints you can apply on the wall exactly the pattern that you like best or the one that you come up with yourself.

Top 5 Stylish Wall Design Ideas You Can Repeat Yourself

Well, if you have not yet decided what it might be, we offer you 5 interesting ways to paint the walls with your own hands:

colorful stripe

Perhaps one of the easiest methods to create an unusual wall pattern is to apply bright stripes with paints in contrasting shades. This can be done with a roller (if the stripes are wide) or a brush (if they are narrow), masking tape and a high-quality color coating.

To do this, you must first paint the wall with the base shade, then stick masking tape in place of the stripes and carefully fill in all the voids with paint of a different tone. When it is completely dry, carefully remove the tape. If you did everything right, you should get perfectly even beautiful stripes.

By the way, they do not have to be horizontal or vertical. If desired, they can be placed at least obliquely - the main thing is that they fit into the surroundings of the house. The same goes for color selection. The simplest solution is to make the stripes two-tone, but if it seems boring to you, you can always paint them in all the colors of the rainbow or combine 3-4-5 or even more of any shades of paint with each other.

Wrinkled skin effect

Another popular way to paint walls is to create the so-called wrinkled skin effect. The secret of its creation lies in the use of an ordinary sheet of paper and a lot of time spent on work.

To create it, you need to take a blank sheet of paper and crumple it as narrowly as possible. Paint part of the wall along the width of the sheet and carefully attach the latter to the paint. Then carefully unfold the paper, removing part of the color coating with it. Thus, the effect of rumpled genuine leather should be obtained. Yes, its creation will require many hours of work, but the result is worth it to spend all your strength and imagination on such a painstaking task.

Smooth ombre

Painting the walls with a smooth transition of color from darker to lighter shades is a great solution for those who decide to freshen up the design of their own home a little. You can get it in several ways:

stencil patterns

If you want to create some kind of unique design at home or apply complex patterns to the walls, it is not at all necessary to order the services of an expensive designer or have an art education. Today, there are a huge number of stencils on sale that allow you to draw truly unique and beautiful patterns on the walls.

The first step here is to evenly paint the walls in the base color, and then attach a pre-prepared stencil to them, glue it with masking tape and carefully paint it with the chosen color. You can work with both a brush and a roller, which depends entirely on the size and complexity of the pattern.

Repeating pictures

One of the popular trends in recent years in wall decor is decorating the latter with textured rollers with a wide variety of patterns. This method allows you to easily and quickly turn your walls into real painted paintings that look very much like wallpaper, but they are not at all.

All that is needed in this case is again to apply a background shade, and then dip a specially selected roller into the paint and walk it over the entire surface of the walls, moving from top to bottom. Thus, you will get long stripes of repeating patterns, which together will turn into one bright canvas.

Of course, in all these methods there are still many nuances associated with the correct selection of the necessary paints, preliminary preparation of the walls, and much more. Therefore, before you start making repairs, you must first choose the staining technique that interests you most, and then find out in detail the details of its implementation.

Here, for example, is one of the master classes on how to properly paint walls using a textured roller:

Have you tried painting the walls yourself at home? And if so, what exactly did you apply and how?

Read also

Repair today is not what it was in the 90s, when everyone in the apartments used the same finishing materials.

Today, stores abound with goods of every kind and taste. Hundreds of types of paints, wallpapers, plasters, etc.

Today, many people try to avoid all sorts of clichés and repetitions, making their interiors as authorial and unique as possible.

In our article we will talk about decorative wall painting.

Wall preparation

It's no secret that the walls must be prepared regardless of the type of finish. But it is worth saying that in the case of painting, the walls need to be prepared best. Often it is the smoothness and evenness of the walls that is the formula for success. All the flaws are visible under the paint, so carefully inspect the walls.

Plaster. The walls must be plastered, creating the basis for putty work.
Putty. The walls are puttied with a thin layer, after which they are cleaned to a smooth state.
Primer. All gaps between plaster, putty and finishing must be primed. The primer provides good adhesion of materials.

What paint to choose

To choose a paint, it is desirable to understand the following about it:

How fast does the paint dry?
Does the paint smell too defiant?
Does the paint consumption correspond to what is indicated on the package.

You can paint the walls in the following ways:

Combining several ordinary paints, but different colors.
Choosing a special decorative paint and applying it in a certain way.

If you choose the first method, then you will usually have a fairly liquid paint that needs to be applied with a molar roller. In some cases, a spray gun is used, which allows you to evenly apply paint to every centimeter of your walls. However, in most cases, an ordinary roller is still used.

You should pay attention to how you apply paint. It is better to do this with uniform movements and equally on all wall surfaces. This ensures that the paint will fall equally on all parts of the walls.

It is necessary to paint the walls in several layers. Each subsequent one is applied to the dried previous one.

Use of decor

You can decorate your walls with specially purchased or self-made stencils.

A stencil can be made from any thick paper by cutting out the pattern you need on it.

This will give your walls uniqueness and beauty.

splash effect

We will recommend an interesting and easy-to-perform effect. A hard brush is taken, dipped in a paint of a different color than the walls, after which the brush is squeezed out and after that, bending the bristles of the brush, the paint is sprayed onto some areas of the previously painted and dried wall.

Contrasting staining

An excellent effect is achieved with the use of contrasting colors. For example, you combine cinnamon and pale burgundy, etc. If you are not deprived of imagination, then you can come up with interesting interiors.

other methods

There are a lot of options to give your walls an interesting look. You can wind pieces of fabric of different lengths on a roller and paint certain sections of the walls with such rollers. You can come up with anything you want, do not be afraid to experiment.

You can also use decorative paint. However, for its application, you need to learn some technological principles. For example, to make walls silky, use silk paint.

Apply it in one stop and let it dry.
After using a sponge, saturate the walls with a second layer, thereby forming a texture.
Next, you need to wait 20 minutes until the paint dries a little.
Take a wallpaper spatula and smooth the paint with arbitrary movements.

Get an interesting effect!

findings

Thus, we considered the topic of decorative wall painting. Most importantly, don't be afraid to experiment! And if experimentation isn't your thing, hire designers and finishers to help create your own unique paradise.

Good luck with your renovations!

Do-it-yourself decorative wall painting is an original solution that allows you to completely transform the interior of a room. There are various techniques that allow you to create completely individual surfaces. To perform such work, you can invite craftsmen, but the cost of the process will significantly affect the repair budget. Therefore, with strict observance of all the nuances, everything can be done independently.

First of all, you need to understand that the paint for special decoration is different from the standard options. Its use makes it possible to obtain non-standard visual effects. But with some diligence and skill, you can get an unusual result, even using standard options.

Currently, the most popular materials are:

Mother-of-pearl. The surface becomes like silk: depending on the angle of illumination, color shades change.
Velvet. A small fraction with a different color is specially added to their composition. Due to this, it is possible to obtain visual depth, as well as to create a soft velvet effect.
Mosaic. They can only be applied with a spray gun. Obtaining a decorative surface occurs due to the fact that the smallest bubbles, falling on the treated area, spread, forming a kind of textured inclusions. It is this method that allows you to most accurately imitate granite.

There are many more different options that have special inclusions in their composition that give a certain effect. There are also special textured paints (glazes and enamels) that perfectly fulfill their role.

If you work on the principle of "cheap and cheerful", then any widely presented variety of the product is suitable for use.

VIDEO: Creating the effect of silk or velvet using decorative paint (master class)

Applying decorative paint

The technology of applying decorative paint begins with the usual preparation, which is characteristic of all finishing and decorative materials.

Preparation process

The surface is completely cleaned of the old coating.
The walls are leveled with putty (after impregnation with soil), there should be no defects. It is a mistake to assume that a decorative coating will hide all the flaws. Sometimes it happens that they become even more noticeable.
The last stage of preparation involves the application of a primer, which is used to treat all areas.

At the preparatory stage, it is necessary to provide for the protection of furniture, windows, doors and other items from damage. This can be easily avoided if everything is securely covered with plastic wrap.

Advice! If possible, everything that is not involved in the performance of work is taken out of the room. This will not only save interior items, but also significantly facilitate the process.

Tools and fixtures are prepared separately:

brushes and roller;
a special device for obtaining the desired invoice;
a tray or any other container convenient for work;
protective clothing, gloves and goggles.

Tools and fixtures that you may need for decorative wall painting

You can create almost any decorative element with your own hands, but the most unusual options are used to facilitate the process. For example, a simple film can give the surface a relief that looks like a stone.

decorative coloring technology

Decorative painting of walls can be divided into two technological processes: simple and complex. But their general structure is almost the same. It lies in the fact that light and dark shades are used in the work. Initially, the main color is laid, and then, after drying, the second tone is applied.

Decorative wall painting involves applying two or more colors after a certain period of time, using a special technique.

On a note! Choosing the right moment for this procedure is considered a special skill. If the processing is done so that the finish layer is mixed with the previous one, but not completely, but forming a conditional border, then the effect will exceed all expectations.

A simple technique for obtaining a decorative coating

For this, both simple and special coloring compositions are used.

The most popular options for applying a decorative coating:

1. Applying a stencil.

Considered the easiest way. You can buy it at a hardware store or make your own. Especially fast is the work with adhesive templates. They are glued to the selected area, the roller or brush is impregnated in the solution to prevent streaks. The composition is applied evenly.

An interesting result can be achieved if you use an airbrush. In this case, the stencil must be made of a rigid material; it is not glued to the wall, but is held at some distance. The picture is blurry. This method is suitable when the base is not yet dry.

2. Usage.

The stores sell special devices for obtaining a decorative texture. The technology lies in the fact that the tool is impregnated with paint and carried out over the surface. The stripes should have different directions and not be too long. Boundaries cannot be created, so every previous parcel must be captured.

On a note! It is quite possible for everyone to make such a roller on their own. To do this, it is enough to wrap the cylinder with a cloth with knots.

VIDEO: How to apply decorative paint on walls using a texture roller

3. Applying a brush.

There are two options for using this decoration device:

The first way - the main shade is processed with a different color. Smears are carried out in different directions. The main thing is that the tool is not too wet.
The second method will require endurance. Two layers are applied to the walls: the main and the finishing. The second is allowed to dry a little. With a brush with stiff bristles, they begin to make movements from top to bottom along the entire height. Stripes with the main color showing through are obtained. This method can be applied to a single shade.

As a simple, but no less popular device, a foam rubber sponge can act, which seems to be stamped on the walls.

Sophisticated technique for obtaining a decorative coating

Complex options differ in that their implementation requires experience that will not spoil the surface to be painted, and this is quite easy to do.

1. Imitation of a marble covering.

Painting "marbled" requires special care.

The main shade is laid on the walls. Colors are selected close to natural material. Without waiting for drying, a new shade is applied with a wide brush. Movements should be directed in different directions, but not too chaotic.

The colors are mixed together. With a thin brush, arbitrary borders are formed. Finally, the paint is heavily diluted and some areas are blotted with a sponge to create a “smoke” effect.

Marble painting

On a note! An excellent result can be obtained even with a simple water-based composition.

2. Spray technology.

The method is quite troublesome, but very original. For work it is better to use solutions based on acrylic. The cover is completely unique. A feature of this option is that the base is sprayed with a different shade. This is done using a brush, the tip of which is slightly moistened with the composition. By choosing the desired distance, they get a different coverage area. But if you overdo it, then too much of it will be colored, and everything will merge.

Although decorative wall painting is not the easiest procedure, it will be an excellent solution in terms of decorating.

The original decorative painting of the walls can quickly transform any room - residential or non-residential. A huge variety of dyes, textures, color combinations, application methods will allow you to decorate an apartment, a private house, an office in accordance with your own ideas about beauty, and the costs will be relatively low.

Advantages of decorative paints

Dyes - a finishing material intended for wall decoration, have many positive qualities:

they retain a good appearance for a relatively long time - many times more than simple plaster, wallpaper;
in stores, in construction markets there is a huge selection of colors, effects;
there are no joints on the painted plane - it is covered with a uniform layer of pigment;
due to its high water resistance, the material is suitable for kitchen walls, bathroom;
the use of a water-based composition creates an environmentally friendly coating that does not cause allergies, does not emit toxins, which is important when decorating a nursery;
if the room wants to be repainted, it is not necessary to remove the previous layer at all;
coloring compositions fit perfectly on plasterboard, plastered, concrete, wood, walls made of OSB boards.

The main thing that is required from the decorative coating of the walls is the uniformity of its application.

Types of decorative paints

Decorative dye contains various additives, has a thicker consistency than ordinary dye, creates a very unusual design, and the appearance of the coating depends on the thickness of the application. Such compositions are divided into two main types: for external and internal work. By the type of film-forming component, four groups are distinguished: acrylic, water-based, latex, alkyd. You can paint with them not only the walls, but also the ceiling, doors, individual decorative elements.

If there is no or minimal painting experience, you should not take on complex patterns, starting with the simplest ones.

Acrylic

This type is the most popular, refers to water-dispersion, invented in the middle of the twentieth century. The composition contains acrylic resin, which creates a coating of high strength, elasticity, polymer emulsion, pigment. The coloring matter retains color for a long time, but for rooms where there is high humidity, such material is not used. It is easy to apply, dries in thirty to forty minutes. Separate varieties are used for artistic painting of the walls of any rooms, facades of buildings, and are sold both in cans of 0.5-4.5 kg, and in the form of aerosols in cans.

Latex

Latex dyes are created on a water-dispersion basis, they contain rubber, which forms an elastic, very durable film coating that is resistant to sunlight and water ingress. There is no harmful "chemistry" in them, because the material is suitable even for a children's bedroom, any interior that does not have sudden temperature changes, strong drafts. Three types are produced: glossy, matte, semi-gloss.
The dye is easily applied to any base - the film is very elastic, it beautifully repeats the surface relief. The coating is vapor-permeable, durable, inexpensive. It should be applied only on a perfectly flat surface.

Before painting, it is desirable to treat the surface with antifungal agents.

water emulsion

Refers to water-dispersion, contains pigments, polymers, water. The coating comes out moisture resistant - when water gets on such a wall, it evaporates, but does not penetrate inside. The composition is completely non-toxic, fireproof, fits well on any surface except varnished and glued, practically odorless, not suitable for covering walls in damp rooms, excessively smooth surfaces. Easy to apply with a brush, roller, spray gun, drying time depends on humidity, room temperature - an average of 3-24 hours.

Alkyd, oil

They are used to protect surfaces in rooms where there are high temperatures, high humidity. The composition contains alkyd resins that increase the service life of the coating. Saturated color remains for a long time, but when applied, dried, the paint has a strong, unpleasant smell. Since alkyd resins can harm human health, these compounds are used exclusively for exterior decoration or in non-residential, well-ventilated spaces.

Oil contains drying oil, pigment, fillers. As pigments are used:

soot;
graphite powder;
white (zinc, lead, titanium);
iron salts;
oxides of lead, cobalt, etc.

Oil formulations are applied in a thin, even layer, avoiding streaks that spoil the appearance. An excessively thick layer dries for a long time, looks worse.

Silicone

The paint is durable, moisture-resistant, heat-resistant, conveniently applied with a spray gun or brush, suitable for interior and exterior work, there is a huge variety of colors. It is not suitable for concrete surfaces, it is heavily consumed on wooden ones, and it is relatively expensive. There are two groups - protective emulsions and primers.

Created on the basis of "liquid glass" with ethyl silicate, polymers. Suitable for finishing facades, any interior. The material is very durable, often zinc, aluminum pigments are added to it, which give the coating anti-corrosion properties. For greater density, the composition includes chalk, mica, talc, etc.

These compounds are used for all kinds of surfaces - cement, limestone, plaster, brick. Completely unsuitable for all types of plastic, natural wood, some types of artificial stone. There are two varieties - silicone-silicate and silicate-dispersion.

How to prepare walls for painting

When a wall is painted for the first time, its surface must be gradually prepared for such a design. What exactly do they do:

remove the old finish;
ground the plane;
cover up various flaws;
putty, grind irregularities;
primed again;
waiting for the putty to dry completely.

Upon completion of the preparatory work, the wall is completely ready for decorative painting.

Cramped rooms with an area of three to six square meters that do not have windows (such as a hallway, a bathroom) should not be painted in excessively cold, dark colors. It is also advisable to refuse large bright drawings - such a room will look very small.

Necessary materials, tools

To paint the walls of the room, you will need approximately the following set of tools:

rollers;
sponges;
tray;
spatulas - steel, plastic, rubber, notched;
hard brushes;
sandpaper;
stencils - if you want to depict a clear ornament;
a mixer or a special nozzle on a drill - for stirring;
masking tape - to protect places that are not planned to be painted.

Before starting work, you should consider what kind of effect you plan to get so as not to buy a bunch of extra tools.

Application methods

Professional decorative paints are expensive, so cheaper analogues are often used, which, when used properly, create an equally beautiful decor. There are many examples of coloring - these are “star dust” and “crumpled skin”, “silk effect” and “pearl effect”, “ombre” and the effect of an unpainted surface, Venetian plaster and stippling, the use of stencils and special electrical tape.

It is not advisable to use more than two or three contrasting colors in one room - this greatly overloads the interior, especially in small rooms.

Using stencils

A stencil is the most original way to quickly transform any room, as well as:

visually change the shape of the room;
"refresh" the interior;
organize a niche;
"hide" the doorway;
mask the imperfections of the painted plane.

If you use a homemade stencil with an image repeated on textiles, the design of the room will become complete, and you don’t have to be an artist for this.
Stencils are distinguished by the methods of applying paints:

one-color - one dye is used;
multicolor - two or more colors are used;
volumetric - a kind of bas-relief is formed on the wall, two to three mm high;
reverse - paint over the space around the picture.

There are disposable and reusable options. The stencil is made by hand or ordered from specialists with any desired pattern. The most popular are plant and flower motifs, stylized animal figurines, regular geometric figures, plot abstractions, monograms and meanders.

The paint is applied through a stencil using brushes, a roller, a foam swab, a spray gun.

This option is used for both walls and ceilings. If you use gold, silver paint on a dark background, the design will come out the most sophisticated.
How it's done:

the wall is painted in the desired color or several at once;
the brush is dipped into the paint, slightly squeezed;
after it is bent in the opposite direction so that the dye splashes on the painted plane - here it is also allowed to use two or three or more different colors.

For work it is better to use a hard brush.

Stippling - the effect of aging

With this method of finishing, the wall looks as if “shabby”, shabby, very old, for this it:

paint in the desired color;
an acrylic layer is applied on top to get contrast;
cover with colored glaze, combined with a painted wall;
smooth the glaze on the wall as evenly as possible with a flat brush;
with a round-shaped paint brush, randomly touch different places, which gives the surface the effect of antiquity.

The method also has a minus: in the presence of multiple bulges, "pits", they all become visible to the naked eye.

The design is very suitable for loft styles, believe me.

The result of painting looks as if the walls of the room are covered with leather, which looks very solid in the office, study, various expensive interiors - baroque, empire, classic.
Finishing goes like this:

the surface is pre-prepared;
the walls are covered with paint containing latex;
the glaze is mixed with latex paint, but the tone is selected a little darker than the main one;
a small section of the wall is covered with the mixture described above, with a brush made of suede, previously moistened in water, squeezed out, with the help of light touches, it is carried out on a still wet surface, creating smooth decorative stains, sometimes removing excess;
when there are lines that are very noticeable, they are blotted with wet suede, cut into pieces, creating a semblance of a surface covered with leather.

A beautiful coating is done step by step, it requires some time costs:

you will need mother-of-pearl glaze, acrylic primer, vinyl dye in two shades;
a paper square is taken from a decorative material, a fragment of the wall is smeared under its size;
the leaf is wrinkled, applied to the plane, after it must be smoothed out, a “wrinkled” coating should be made;
with similar pieces, process the entire wall completely.

Venetian plaster effect

This option is one of the most decorative. It is used in art deco, classic, gothic, etc. interiors. To create a "Venetian" do the following:

latex paint is poured into a wide dish;
pigment for paints is sprinkled from one edge, gently stirring with a stick - dark and light parts will come out;
a lighter dye is taken with a spatula, applied like plaster;
after a dark composition is applied, part of the wall is covered;
when dark and light fragments are obtained, they are gently smeared with a spatula over the surface from side to side to make it look beautiful;
at the end, the plane is polished with fine sandpaper, rubbed with wax.

home > healthcare