Acrylic wallpaper. Acrylic wallpaper for the home - advantages and disadvantages, application Paper-based acrylic wallpaper reviews

The wide distribution and love of consumers for acrylic paints prompted manufacturers to further experiment. And now an extensive family of finishing materials based on acrylates and polyacrylates has been supplemented with acrylic wallpapers.

How do they differ from other types of coatings, what are the features of their production, installation and operation?

Acrylic wallpaper: characteristics

Let's start with the question of how acrylic wallpapers are made. This is by no means idle curiosity. It is the raw materials and manufacturing technologies that give materials main properties and characteristics that they bring into our lives.

Acrylic wallpaper is a two-layer material, the basis of which, as a rule, is thick paper. A layer of acrylic paint is applied over it. Or rather, not a layer, but a relief. The first feature of acrylic wallpaper is that the finish layer is applied not as a continuous film, as is the case with vinyl wallpaper, but in fragments.
Acrylic itself is an artificial compound obtained by the polymerization of acrylic acids. On the basis of the obtained substances, paints and varnishes are made, which are easily diluted with water, and when dried, form a thin but durable film with water-repellent properties.
Acrylates differ in that they do not have a negative impact on human health, unlike, for example, benzoates. Acrylic paint after drying, does not emit harmful substances, even when the temperature in the room rises. In addition, this substance is practically odorless, which confirms the absence of fumes.
In the production of acrylic wallpapers, acrylic paint is used as a decorative coating. It does not lay down in a continuous layer, but is applied with a pattern or relief. This technology, on the one hand, provides acrylic wallpaper with the ability to carry out free air exchange in the room. On the other hand, it deprives the wallpaper of the properties of a continuous acrylic coating. In particular, resistance to moisture.
Acrylic wallpaper is often compared to vinyl. Although this comparison is not entirely successful. These are different materials, with different properties, including consumer ones. Acrylic wallpaper creates a more comfortable space due to its vapor permeability. Vinyl is stronger and better resist moisture and steam.
Acrylic wallpaper, like the rest of the wallpaper material, is available in the form of rolls, usually 10.5 meters long and 0.5 to 0.9 meters wide. The cost of wallpaper is very diverse - from 150 rubles per roll to 1.5 thousand. It all depends on the manufacturer, country of origin, year of production of the collection and wallpaper design.

In order to make the right choice, we systematically analyze the entire a range of advantages and disadvantages of acrylic wallpaper.

The advantages of this coverage include:

Vapor permeability, which allows natural ventilation of the room.
High quality workmanship. Saturated colors, original textures, beautiful patterns and unusual ornaments - all this can be found in the catalogs of acrylic wallpapers. Moreover, for this it is not at all necessary to buy expensive imported analogues. Our manufacturers produce samples that are in no way inferior to European counterparts.
Safety for human health and for the microclimate of the room. Wallpaper creates a comfortable living environment. They do not emit harmful substances and prevent the formation of excessive dampness in the room. Therefore, unlike vinyl wallpapers, acrylic wallpapers are quite suitable for decorating bedrooms, children's and other rooms of frequent or permanent stay.
Acrylic wallpaper is cheaper than vinyl, so the availability of the material becomes one of the main arguments in its favor.
Acrylic wallpapers allow the use of wet wipes and mild detergents in the care. So if the wallpaper is too dirty, there will be no problems with cleanliness.

Cons of acrylic wallpaper:

Low resistance to moisture, water, and mechanical damage.
As a result, the service life, although not short, is not as long as that of vinyl wallpaper. On average, acrylics last 5-7 years. Although under proper operating conditions, this period may increase.

Sometimes you have to meet the opinion that acrylic wallpapers are produced in a limited design. This is a highly controversial claim. To dispel it, it is enough to get acquainted with the collections of inexpensive, but diverse in style and design, domestic "Slavic wallpapers". Fans of unusual colors, original combinations and complex textures should pay attention to acrylic wallpapers produced by Bluemountain (Canada) or Wallquest (USA).

How to choose the right acrylic wallpaper?

The issues of choosing the right color, texture and design are always very acute, because it is very difficult to navigate a wide range of acrylic wallpapers. To make your life easier, use a few very effective tips.

Be practical in your choice. First of all, you need to take into account the purpose of the room and the operating conditions of the coating. If this is a bedroom, study, nursery, living room, hall, then you can, and even need to buy acrylic wallpaper for these rooms. They will not harm the health and climate of the premises. For the kitchen, bathroom, hallway, which has access directly to the street, the living room where they smoke, it is better to choose a different type of wall covering.
Consider the size of the room and its configuration. Dark tones, large patches of color, a wide variety of colors, such as uneven color stripes that are so popular now - all this will make a small room cramped and smaller. Visually expand the perception will help light colors, small drawings, two or three colors of alternating horizontal or vertical stripes. An unsuccessful niche in the room can be decorated with wallpaper-panels, they are also made using the acrylic technique. A light image with a perspective will visually expand the scope of a small room and help to include a niche or alcove in the space.
Do not be afraid to show imagination. By combining plain and colored acrylic wallpapers, you will not only get a trendy design, but also add variety and depth of perception to it. For example, acrylic wallpaper in a vintage design that mimics an old wall can be organically complemented by cute roses on a faded blue background. It was this pattern that was very popular in wall decoration more than 100 years ago. Get a lovely, discreet design with a touch of retro. And by the way, the combined wallpaper will not get bored for a very long time.
It is not necessary when buying to choose the most expensive wallpapers of overseas brands. It is enough to purchase wallpaper from a large, well-known manufacturer. His name will serve as a guarantee of the quality of the purchase. And the technologies for the production of acrylic wallpaper, in fact, do not differ from each other, no matter in which countries they are produced.
Do not try to match the wallpaper to match the furniture or the color of the textiles. It's no longer interesting. On the contrary, modern design welcomes a variety of options and combinations. This does not mean bad taste and excessive variegation. You can strike the right balance if you apply the golden rule of an interior designer. It says: in any diversity, unity must be observed. This may be the unity of the ornament. For example, a recurring theme on wallpaper, cushions and curtains, but in different textures, colors, sizes and designs. Most often, these are flora and fauna - flowers or tropical birds. It may be the unity of color. Different patterns, shapes, sketches, but made in the same tone, look incredibly fresh and stylish. For example, the blue stripes on the wallpaper are accentuated by blue glass vases, they are echoed by curtains with blue-green concentric circles, and on the floor there is a dense, short pile carpet in the color of thick ultramarine.

How to glue acrylic wallpaper

The technology is not much different from conventional wall pasting.

In order to paste over the walls with acrylic wallpaper, it is better to purchase glue for medium vinyl wallpaper. No need to take glue for heavy coatings, it will be too thick and dense.
The wall must be well prepared, that is, dried, leveled and cleaned of unwanted deposits, dust and construction residues.
Glue is applied to the wallpaper strip. The canvases themselves are glued joint to joint. Acrylic wallpapers have some elasticity, so they can be adjusted during pasting, shifted at the right angle.
It is necessary to dry the wallpaper for at least a day, in a room where there are no drafts, and the temperature is kept in the range from 18 to 22 degrees.

Acrylic wallpapers are an excellent alternative to vinyl coverings in residential areas for permanent use, moreover, they are distinguished by democratic prices.

Acrylic wallpapers are beginning to enjoy great popularity among buyers. They are similar to vinyl, but the acrylic coating is much thinner, it is easier for air to pass through itself. Acrylic is one of the most environmentally friendly materials.

Acrylic wallpaper is thin and eco-friendly

Recently, acrylic wallpapers are becoming more and more popular.

Types of acrylic wallpaper

Acrylic wallpaper consists of 2 layers - base and foamed acrylic. There are two types of acrylic rolls.

Acrylic wallpaper on non-woven base

Advantages and disadvantages

Acrylic wallpaper has many advantages compared to other types:

ecological purity of the material;
high quality;
low price;
resistance to various types of damage;
a light weight;
a variety of colors and relief patterns;
do not require special care, these wallpapers, with a little care, can be wiped with a soft, damp sponge.

Acrylic wallpaper is easy to clean

The cons of acrylic rolls are much less than the pros:

poor water resistance;
less life than vinyl.

How to choose wallpaper and glue for them

When choosing acrylic wallpaper, the main attention should be paid to the interior of the room in which they will be located. Bright, unusual colors are suitable for modern styles. Monochromatic wallpapers, designed in the same color scheme with objects in the room, will go well with the classics. If sunlight does not enter the room, then warm-colored wallpapers will be very useful here. For interiors filled with sun, it is better to choose a coating of cold shades. Do not choose bright colors, large patterns for small spaces. This will visually reduce the room even more. As for whether to choose a domestic company or a foreign supplier, it depends on your desire. Since domestic and imported canvases are of the same quality.

The choice of glue should be taken seriously

The choice of glue is a responsible matter. Its quality affects the strength with which the wallpaper will be attached to the walls.

You need to pay attention to properties such as:

viscosity;
acidity (if the manufacturer indicated a pH value of 6-7, then such an adhesive composition will not turn yellow after drying);
hygiene - the presence of bactericidal additives in the adhesive composition;
shelf life, operation;
moisture resistance;
service life - the period of time during which bubbles will appear between the wallpaper and the base.

For acrylic wallpaper you need to select a special glue

Acrylic paper-based wallpaper requires a special adhesive. The composition of such glue includes starch and various additives that prevent the appearance of mold and fungal microorganisms on the paper roll. It is necessary to follow the instructions exactly so that the adhesive composition retains all the declared properties.

Glue should be applied according to the manufacturer's instructions.

Preparing walls for gluing

Before proceeding with gluing acrylic, you should properly prepare the base. The durability and reliability of finishing works depend on this.

First of all, cleaning work should be carried out - the old finishing materials (old newspapers, fallen off plaster, peeling paints) are carefully removed from the walls.

First you need to clean the wall of old wallpaper

Sometimes it can be very difficult to remove the old wallpaper. If it is a paper material consisting of one layer, it can be softened with water or with a special wallpaper removal solution. If there is a moisture-resistant two-layer canvas on the walls, you must first make cuts on it with a knife, then apply the solution.

There are several ways to remove old paint. Oil, enamel are removed with metal scrapers. The water emulsion is cleaned with metal spatulas, which are moistened in soapy water. Places where the paint holds firmly can be easily cleaned with a grinder.

Paint can be removed from the walls with a special machine.

To assess the strength of the plaster, the walls must be tapped with a hard thing. Exfoliated, bubbling plaster should be carefully removed. Then plaster these places together with the cracks formed in the walls.

After cleaning work, the surface of the base is primed with a special agent. You can choose the appropriate type according to the characteristics indicated on the package. A primer is needed in order to strengthen the walls, improve the adhesion of the adhesive and the base.

At the end, it is recommended to prime the walls

How to glue acrylic wallpaper

When the preparatory work is completed, proceed to gluing. To ensure that the material lays flat, markings are made from floor to ceiling. A roll of wallpaper is cut on a flat surface. About 5 cm of stock should be added to the desired length. A pre-prepared adhesive solution is applied to the paper for a couple of minutes. During this time, the wall is treated with glue. After that, the strips are applied to the wall, leveled along a vertical line, glued. To avoid air bubbles, acrylic wallpaper is leveled with a soft brush from the center to the edges. If bubbles still form, you need to pierce them with a needle, then smooth them out. Excess matter from below is cut off with a knife.

To avoid air bubbles, acrylic wallpaper is leveled with a soft brush from the center to the edges.

Excess glue protruding from under the wallpaper is removed with a clean, dry cloth. It is better to start sticking from the corner of the room. It is advisable to have a partner for this work, then sticking acrylic wallpaper will be done quickly and efficiently.

Acrylic wallpaper on a paper basis requires special gluing conditions. The glue is applied in a very thin layer to avoid excessive moisture. When gluing such wallpaper, it is important to avoid drafts. Otherwise, deformation of the web or its peeling will occur. The room is ventilated 2 days after gluing.

Glue on the wallpaper is applied in a thin layer

Acrylic wallpaper care

Acrylic wallpaper is very easy to keep clean. The most important thing is to clean with a soft sponge dipped in plain water without any additives. Acrylic coating is very delicate, with a hard brush and inappropriate means it can be ruined. In stores there are special detergents designed for wallpaper. The minimum amount of washing liquid is applied to the sponge and the acrylic contamination is gently wiped. After that, wipe with a damp cloth. Instead of chemical liquids, ordinary laundry soap is used, which has a cleansing effect. If you properly care for acrylic wallpaper, they will last a very long time.

Video: Which wallpaper to choose for an apartment

Not so long ago, acrylic wallpapers appeared on the construction market, which quickly became widespread among consumers. This is due to their attractive appearance, practicality and some other advantages. Next, we will take a closer look at what their features are, as well as how to properly stick them on the walls and take care of them.

General information

First of all, consider what acrylic wallpaper is. So, this material is analogous to vinyl. It differs only in that instead of foamed vinyl, foamed acrylic is applied to the base.

Like vinyl, acrylic wallpaper consists of two layers - a paper base and, in fact, foamed acrylic. One of the main features of acrylic wallpapers is that they are applied using a dot method, as a result of which the coating is breathable.

In addition, the difference from vinyl wallpaper lies in the fact that the foam layer is 2 mm, not 4, i.e. they are twice as thin. This, of course, affects the weight of the wallpaper, making it easier to stick with your own hands than vinyl sheets.

Among other advantages, the following points can be distinguished:

High performance, including good wear resistance.
The price is lower than the vinyl counterpart.
Environmentally friendly, as the polymer coating does not emit toxic substances. In addition, the coating "breathes". Thus, there is no harm to acrylic wallpaper, so they can even be used for. In addition, they do not create favorable conditions for the development of all kinds of bacteria and microorganisms.
They are water resistant, although not as good as vinyl wallpaper. Therefore, they should not be used in rooms where direct contact with water is implied.
Thanks to the wide range of colors on the market and the unique relief pattern, the wallpaper can be used in completely different interior styles.
Due to its good resistance to mechanical damage, the material can be used in rooms where there are small children.

As for the minuses, a shorter service life can be noted than that of vinyl wallpaper. This is due to the fact that the canvases have a smaller thickness. In addition, wet cleaning must be done very carefully for the reason indicated above.

Wallpapering

Foundation preparation

Now let's look at how to glue acrylic wallpaper so that the coating is reliable and durable.

To do this, you must first prepare the base as follows:

First of all, you need wallpaper, etc. Often, home craftsmen are interested in - is it possible to glue wallpaper on acrylic paint? On account of this, the opinions of experts differ, so it’s better not to risk it.

However, if you decide to save time, then you need to make sure that the paint adheres securely to the wall. After that, it is desirable to sand the coating.

Then the surface must be covered with a layer of soil composition.
If necessary, the base must be leveled with putty.
Before gluing, the primer must be applied again.

In the photo - puttying the wall

Sticking

After the base is prepared, you need to prepare a special glue, which is recommended by the material manufacturer. The glue preparation recipe is printed on the package.

After that, you need to cut the wallpaper into canvases of the required length. It is advisable to perform this procedure on a flat surface.

Further instructions for pasting the walls are as follows:

First you need to measure the width of the canvas from the corner and draw a vertical line using a plumb or level.
Then glue is applied to the canvas and left for several minutes.. During this time, it is necessary to glue the wall.
Next, a canvas is applied to the wall and aligned along the marked line. The coating should be leveled on the wall with a soft cloth or brush so that no air bubbles remain under it.
The rest of the canvas is cut off from the bottom.
The rest of the walls are glued in the same way.
After completion of work, it is necessary to provide normal conditions for the wallpaper to dry.. To do this, it is necessary to close all windows and doors, since the material does not tolerate temperature changes. You can ventilate the room two days after gluing.

Advice! It is more convenient to stick wallpaper with two people. In this case, one person applies the wallpaper from above, and the second from below.

Wallpaper care

The main rule when caring for this coating is not to overdo it. This is due to the fact that acrylic-coated wallpapers are quite “delicate” and can be damaged by rough brushes or sponges.

It is best to clean with plain water. However, if a stain appears that cannot be washed off with water, then detergents must be carefully selected. In some supermarkets, you can find special formulations designed for cleaning washable wallpaper.

After the detergent is selected, it must be applied in small quantities to a rag and gently rubbed over the contaminated area. Then the surface is wiped with a damp sponge or cloth soaked in clean water.

Note! This coating does not tolerate abrasive products, as they can permanently damage the coating.

Conclusion

Acrylic wallpaper is a great contemporary. In many of their properties, they are superior to more expensive types of wallpaper, however, like any other building material, they are not without some drawbacks. Therefore, when choosing, one should take into account not only its pros, but also cons.

For more information on this topic, see the video in this article.

Acrylic paper-based wallpaper appeared on the domestic construction market relatively recently. But during this time they have already managed to gain considerable popularity among consumers. In this article we will try to analyze in more detail how to glue acrylic wallpaper with a paper base.

Features of acrylic wallpaper

Acrylic is a universal polymer widely used in the production of modern building and finishing materials. It is an ingredient for the production of adhesives, paints and fillers, various sealants and organic glass. Acrylic was first synthesized in Germany in the 1930s. Over time, on its basis, a whole family of polymers with different physical properties was created, which received the general name "acrylic".

According to its characteristics, acrylic is in many ways analogous to vinyl. According to their type, paper-based acrylic wallpapers are two-layer. Foamed acrylic is applied to a paper base and represents the front side. Among the main advantages of acrylic wallpaper are the following:

Lighter weight than vinyl counterparts. The layer of foamed polymer applied to the paper base is twice as thin in this case: two millimeters versus four. This greatly simplifies the sticker process.
Significant service life. Greater resistance to abrasion, UV exposure, mechanical damage than single-layer paper options.
Affordable price, less than that of vinyl analogues produced on a paper basis.
Environmental friendliness. This polymer coating does not emit harmful substances during operation. Also, a special technology of applying a polymer on a paper base allows the walls to "breathe". The point method of applying the polymer does not create a continuous, air-tight layer of acrylic on the paper base.
Suitable for wet cleaning with soft sponges.

Attention ! Due to the special technology of applying a polymer on a paper base, which does not form a continuous waterproof layer, it is not recommended to use acrylic wallpaper in rooms with high humidity.

For the same reason, wet cleaning should be done as gently as possible, without the use of aggressive cleaners.

Due to the large range of color options on the modern market and the unique relief pattern, acrylic coated wallpaper can successfully fit into any interior.

Acrylic wallpaper gluing

The technique of gluing wallpaper made of acrylic basically does not differ from gluing other wallpapers. The paper base makes them unpretentious in the choice of glue, and they will also adhere perfectly to any wall. Before you start gluing, you need to prepare the wall for work. From this will largely depend on how well the wallpaper will be pasted.

Preparing the wall for gluing

Preparing the wall for wallpapering is one of the key moments of the whole job. If this process is not approached responsibly enough, then soon it will be possible to observe the sad consequences of poor-quality repairs.

First of all, it is necessary to clean the walls from the remnants of old finishing materials - wallpaper, paint, loose plaster and putty.

Removing old wallpaper can be a significant difficulty. Sometimes they stick so tightly that they cannot be separated even with a spatula or knife. To facilitate the separation process, they should be softened with water. Single-layer wallpaper on a paper basis should be thoroughly moistened with a special solution for wallpaper removal. Similar tools in the range can be found in building supermarkets. In addition, such a tool can be prepared at home: you need to add a little wallpaper paste to the soap solution. Glue will be needed so that the solution penetrates better to the paper base and lingers on it longer without draining or drying out.

To remove moisture-resistant options - with vinyl or the same acrylic coating - you need to use a special technology. Before applying the solution to the surface, it will be necessary to make cuts or scratches with a clerical knife or a needle roller. Places where the paper base holds especially firmly, you can try to steam with an iron through wet gauze.

If the walls are painted with paint, then it also needs to be carefully removed. Oil paint or enamel should be cleaned with a metal scraper. If the paint adheres to the wall very firmly, you can process it with a grinder. Water-based paint is easily separated from the base (plaster, concrete) with a metal spatula, which must be periodically moistened with soapy water.

After that, the basis of the wall should be assessed - the plaster or putty should hold firmly enough, without peeling off, and without forming "bubbles". In order to ensure the strength of the base, the walls are tapped with a solid object: a ringing sound upon impact means that the plaster has peeled off in this place and needs to be removed.

Attention ! All places of plaster peeled off from a brick or concrete base must be carefully removed, and then re-plastered.

If there are any cracks on the walls, they must also be carefully puttied to prevent their further increase.

After the walls are fully prepared, it is advisable to prime the surface of the wall base with a special compound. Today, there are many types of different primers on the market - alkyd, acrylic, mineral, etc. You can choose the variety that is most suitable for your case by reading its technical characteristics or by consulting a specialist in the store. The primer will greatly simplify the entire gluing process - it not only strengthens the base of the wall, preventing it from shedding, but also improves the adhesion ("adhesion") of the wallpaper adhesive to the wall. After carrying out all the necessary preparatory work, we proceed directly to gluing the wallpaper.

The choice of wallpaper paste

Today, the attention of consumers is provided with a huge number of various adhesive compositions. The choice of glue must be approached with all responsibility, since the adhesion strength of the paper web to the base depends on its quality. It should immediately be said that the paper base is quite unpretentious to the technical characteristics of the glue. Paper has the ability to interact well with any adhesive composition, absorbing it well.

Not so long ago, a home-made composition prepared from starch and flour was used for gluing. However, it has much worse adhesion than factory-produced compounds. And, as a result, it has a low resistance to moisture, it is prone to delamination from the wall over time. In addition, a home-made paste is a beneficial environment for the reproduction of fungi and microorganisms that pass onto the paper layer of the canvas.

Another, not so long ago, popular glue is building PVA, or bustilat. On the one hand, it has excellent adhesion, which causes a strong adhesion of the paper base to the wall, but it creates an airtight layer on the wall surface. Another disadvantage of bustilat is a very strong adhesion to the base of the wall. Therefore, during subsequent repairs, it will be possible to separate the bustilate layer and the paper base only together with the top layer of plaster.

The best option for gluing paper-based acrylic wallpaper is adhesives specially designed for this purpose. Such compositions, for the most part, are made from modified starch with the addition of various ingredients that prevent the development of fungi and mold on the paper web. In order for the adhesive to meet the declared technical characteristics, when preparing it, it is necessary to carefully follow the instructions indicated on the package.

Wall marking

Before starting work, vertical markings should be applied to the wall, which will make it possible to stick the paper sheet as evenly as possible. Start marking, as well as gluing, should be from one of the corners of the room. Using a level or plumb line, we draw a vertical line from the ceiling to the floor. From there we start wallpapering. Next, we measure the height of the ceilings and cut the wallpaper into strips of the required length, leaving 5-10 cm overlaps. We spread the canvas on the floor and proceed to lubricate it with glue.

Glue application

When gluing paper-based acrylic wallpaper with glue, the following technologies must be observed. Glue is initially applied to the wall, and then to the paper base of the wallpaper. It is necessary to apply glue in a thin layer, since the paper web does not tolerate excessive moisture - deformation of the paper is possible, which, after gluing and drying, will lead to warping of the web and displacement of the pattern. Then the paper web should be folded in half, with the glued side inward and left in this position for 5 to 10 minutes. This will allow the paper surface to be evenly saturated with glue. Thanks to this, the paper web will adhere evenly and firmly to the wall.

Sticking wallpaper on the wall

It is best to work on sticking wallpaper together - this way the work will be done much faster and better. We apply the canvas smeared with glue to the wall, aligning its edge with the vertical marking line. We should not forget about the overlaps from the bottom and top of the canvas - they are removed after finishing work with a clerical knife, when leveling the wallpaper.

Important ! When gluing wallpaper with a paper base, it is necessary to ensure that there are no drafts.

When dried, they do not tolerate temperature changes caused by drafts. It is also possible uneven drying of the adhesive, which will lead to delamination of the base from the wall. Therefore, when gluing paper-based wallpaper, all doors and windows must be tightly closed.

The base of the next canvas is also smeared with glue, the strip is folded in half and left for several minutes. The second canvas is glued end-to-end with the previous strip. The rest of the strips are glued in the same way. Upon reaching the opposite corner, the wallpaper strip should be cut from the milestone down so that its edge extends 3-4 cm onto the adjacent wall.

For leveling irregularities when gluing, it is best to use a special plastic spatula. Excess glue squeezed out from under the canvas is removed with a dry cloth. Air bubbles formed under the base are pierced with a needle and then smoothed out.

acrylic coating

Do you want to choose an inexpensive, aesthetic and attractive finish for your walls? You should buy paper wallpaper with acrylic coating. The material is supplied in rolls and consists of a paper base coated with a thin acrylic substance.

Acrylic coating is applied pointwise, so that the material fully retains the ability to "breathe". In addition, thanks to this spraying, the wallpaper acquires additional volume and decorativeness - looking through paper wallpapers with acrylic coating in the photo in the interior, you will see the most expressive design solutions.

Features of paper wallpaper with acrylic coating

The catalog of acrylic coated paper wallpapers includes many different solutions:

colored and plain canvases;
with a pronounced texture or applied pattern;
in the style of classic, ethno, minimalism, country, hi-tech, modern and so on.

It is important that the price of acrylic-coated paper wallpapers remains affordable - this is one of the cheapest wall coverings, which is durable, durable, and hygienic.