Gypsum figures for the garden with their own hands. Before that, only a madman could think of! But the idea of ​​making things out of cement is awesome...

Ekaterina Ivakina

Decorating your home and yard is an interesting business fascinating.

Develops your imagination. Everyone strives for comfort, so anyone who wishes to do this can embody their ideas.

craft handmade gives free rein to your creativity and gives you the opportunity to save your money.

Required for work cement solution in the ratio of 1 part cement to 3 parts sand.

The simplest is garden balls, which can be made using an old children's rubber ball.

A 5 liter plastic bottle was used to make the owl.

applied in stages cement mortar.

From cement you can make a vase - a flower bed. For its manufacture, old unnecessary containers were used.

For making my "tadpoles" newspapers, scotch tape, a 30-liter bottle were used.

It is more difficult to perform a turtle. 2 were used here liter bottles for legs, old shell cups, wire, Rabitz to reinforce the figurine.

The sheep is made on the basis of a 5 liter bottle.

Garden crafts from g cement it is better to dry for at least 2-3 days. Then they can be painted with acrylic or oil paints.

For better preservation, you can cover the figurine with varnish. And for the winter it is not necessary to clean it indoors, as our crafts made of strong and durable material, which is not afraid of rain or frost. And let them decorate your site for more than one season.

And I present to your attention stone and pebble crafts.

crafts for the garden with your own hands can bring you great pleasure. Choose the figurine that best suits your personality and the design of your garden and patio. And try to make it yourself!

Related publications:

"Country Stories". Commonwealth of tiles and cement. Part 3. Hello, dear colleagues! I'm glad you appreciated mine.

A creative person is never bored! Even the simplest thing, it would seem, in his hands can become a masterpiece! Modern children.

I bring to your attention ideas for graduation with your own hands. I made this design and gifts for my graduates last year. "Children.

"Tools of stone". Synopsis of the GCD as part of the implementation of an innovative project Abstracts directly educational activities in the process of implementing an innovative project. Project theme: "Networking.

Summary of GCD with elements of experimentation in the younger group "Introduction to the properties of stone" Purpose: development cognitive activity children in the process of experimentation. Integration educational areas: communicative-personal.

I present to your attention the work and crafts made of fabric with my own hands. The fabric is very well processed, retains color, quality, longer.

Landscape designers love to decorate suburban areas stone, concrete and cement products. Although these words sound very loud and intimidating, in fact, cement or pebble crafts look very cute. A big plus is that it is very easy to make crafts from cement for the garden with your own hands. Therefore, if you want to bring zest to your garden, then take a look at these dacha ideas. Everyone can decorate the garden with such homemade sculptures, flowerpots and candlesticks! See what can be done with concrete.

15 GREAT GARDEN DECORATION IDEAS

Make a bird drinker in the shape of a leaf. For this you will need big leaf burdock and concrete mortar. Just lay a layer of cement on top of the sheet, and wait until it dries completely.

Original garden flowerpots for growing annuals are made from boots. Just pour a cement solution into old rubber boots, place a mayonnaise bucket on top (to leave a notch) and dry. Cute boots will turn out to be surprising to everyone. You can color them in later.

Stylish lamps that are not afraid of rain can be hung on the terrace or in the gazebo. The principle of making crafts from cement with your own hands is the same - fill the form with a solution of cement, insert a tube for juice, where the wire will pass and dry.

The heart shaped mini flower beds are just amazing!

Now cement garden flowerpots can be made for every taste.

Wow, the decorative legs look very funny!

www.dom-v-sadu.ru

What products can be made from cement for a garden plot

if you have household plot, then you probably want to arrange it beautifully and in an original way. However, most decorative garden elements are expensive. And besides this, they can not be called durable. For those people who have a well-developed inner fantasy, they may well make interesting crafts for your garden from ordinary cement. This material differs from others in high resistance to different kind natural influences (hail, frost, bright sun, water), but also its accessibility.

The nuances of working with cement mortar

After reading this publication, you will learn how to create crafts from cement for the garden with your own hands. Below we will offer you only the most best ideas. In order to be able to decorate your backyard in an original way, you can use a planter, flower pots, various figurines fairy tale characters, and you can also make different objects flora from cement with their own hands. This material does not belong to the category of capricious, but many people have either little or a lot of experience with it. Despite this circumstance, there are a number of basic rules that should be observed when working with cement in order for crafts to be durable and of high quality.

As for the manufacturing technology itself, sweep, it consists of the following:

First you need to prepare the main elements for the job: building sand, cement, tile adhesive and water (for the best ductility and the lowest risk of microcracks). For one part of cement, you need to take two parts of sand and one part of glue. At the very least, it is necessary to add two hundred and a solution to the water in small portions to the consistency of thick sour cream. It will be much more convenient to work with this mixture: it will not drain, but it will remain very plastic.

All products made from cement will require a long drying time. This process can take up to seven days. In order to prevent the surface from spreading, ready product must be covered with PVC film. And to give the product the right and beautiful shape, you need to place the base on small hill from the sand, or a little buried in it. After the product has completely hardened, its surface should be coated with a primer. And only after the end of this procedure, you can start applying paint and varnish.

If your craft has any irregularities and roughness, then before priming it, you should modify the product with a file and sandpaper.

Apart from cement mortar concrete is used. This material is distinguished by the presence of large fractions (gravel or pebbles), and also by high strength. Crafts made of concrete for a garden plot can be in the form of large monolithic boulders. In addition, concrete is very convenient to use for making the base for all kinds of compositions (a pedestal for a sculpture or a platform for a fountain).

There is another material that is very similar in its use. This is plaster. Yes, it is worth noting that it does not have such strength as cement, but it is decorative and more plastic. With it, you can make hollow figures. For garden creativity, molding, architectural and acrylic types are used. When working with gypsum, it is necessary to take into account its very fast solidification. Often, this material is advised to be added to the cement mortar for the manufacture of sculptures.

The most interesting cement crafts will be presented in the photo. And you will really be convinced of this. If you do not have the necessary experience to apply cement in decorative purposes, you can start making something simple. The very first products in your garden can be colorful balloons, interesting in their form flower pots or cute mushrooms.

In order to make a mushroom, you will need to find an old rubber ball. It is from its diameter that the size of the future mushroom cap will depend. In addition to the ball, you will also need a plastic bottle. It will act as the basis for the legs of the mushrooms. Its size must necessarily be proportional to the size of the hat. In addition to the bottle and the ball, you will also need a metal rod to attach the cap to the stem of the mushroom. The ball must be cut into two halves. One of them must be installed on a bucket of sand and pressed evenly. Then it is necessary to pour cement mortar into the resulting form and level it. At a plastic bottle, you need to cut off the neck and bottom, and insert it into the filled form in the center, approximately immersing it by one or two cm. Next, using a long metal rod, you need to connect the cap of the future fungus to the leg and fill the cavity inside the bottle with a solution. Two, three days the finished product must harden. Then you need to remove a piece of the ball and a plastic cylinder.

Will look very nice on garden plot mushrooms different sizes in the form of a small field. In addition, it should be noted that your own imagination may prompt you to use other containers (jars, bowls). You just need to make an openwork ball that will seem airy and light. As a basis, you can use Balloon ik. All sizes of your future figures will depend on how much you inflate the balloon. Then you need to put in ready solution any rope and wrap around the ball. In this case, you do not need to wrap the base very tightly. It is necessary to leave small holes for the subsequent extraction of pieces of the burst ball. After your product is completely dry, you can start decorating. If you cover the balloons with a small amount of cement mortar with the addition of gypsum, then you can get very interesting and original garden lanterns or flower pots.

With this technology, you can make beautiful vases for dry flowers. In this case, not only external, but also inner side. If you pour the solution into a small hole in rubber balls, then as a result you can get monolithic balls of various sizes. Scattered in a chaotic manner and painted in a variety of colors, they will look stylish and concise. If you use plastic containers in the manufacture of products, you will be able to get a planter for a fat woman, cacti or Crassula Ovata as a result.

The container should be wrapped in PVC film, and a bag filled with sand or clay should be placed inside so that the container can hold its shape. Then it must be covered with cement mortar. After it is completely dry, remove all auxiliary materials. And in the bottom, with the help of a drill, you need to make special drainage holes. Then the product should be coated with a primer and paint. It is quite simple to make a flowerpot using a vase or bucket. One container should be inserted into another, and the solution should be poured into the space formed between them. As a result, you will get a beautiful product. You can decorate it as you go. It just takes a little imagination.

Those cement crafts that are in this article are painted step by step. Our instructions will help you beautiful products to decorate the dacha. Flowers that are planted in a flowerpot, in the form of crossed palms of the hands, will look very original.

In order to manufacture this masterpiece you will need rubber gloves. They should be evenly filled with mortar. And for rigidity, a metal bar must be inserted into each finger. In order for the product to come out of high quality, you need to try to prevent the formation of air bubbles. After the gloves are completely filled with the solution, they must be given desired shape and fix. After a couple of days, the rubber should be cut and removed. If you need to connect two palms together, you should use the same solution for this. Well, in the end, the surface must be polished with sandpaper, primed and painted.

Complex figures with a frame

Our garden crafts from cement are able to attract the attention of everyone. If you do everything right, then your garden will be filled with new colors. More interesting to decorate your country cottage area sculptures from mythical characters and animals. These masterpieces will involve the preliminary construction of a very strong frame and the application of cement in layers.

Very original flowerpots can be made using buckets from the building mixture. At the initial stage, the container of the required size should be wrapped with a plaster mesh and covered with a thick layer of cement mortar. At the second stage of these works, before the mortar is completely hardened, it is necessary to carry out a decorative adjustment, thus making an imitation of an old stump with natural wrinkles on the bark.

Next to artificial reservoirs, it would be quite appropriate to place a monolithic figure of a hippopotamus. But as for the place for the location of the sculpture, it must be determined immediately, and properly aligned, since in the future, the figure will be stationary. As a frame, 2 elongated basins can be suitable, which should be fastened together with a wire. You can think of another option: a very thick cement mortar must be covered on top of a large pile broken brick or rubble. As for the figure itself, it will not contain very complex elements. It's pretty easy to make. After the cement has completely hardened, the figure must be treated with a special fixing impregnation, or with a dry pigment for concrete, carefully rubbing the powder with a sponge.

The most complex sculptures are made in several stages:

1. First you need to make a frame of foam, wire or containers.
2. Then the blank is covered with a plaster mesh.
3. Then the mixture is applied in several layers.
4. Next, small details are formed (clothes folds, facial features, clear texture, etc.).
5. At the last stage, the primer and painting of the finished work is carried out.

Flower vases in the form of swans will be a very beautiful and elegant decoration of your garden. An old plastic basin will serve as the body frame of the future swan, and the neck will be made of interlaced wire. You will need to make wings, head and imitation plumage from cement mortar.

Powerful monolithic figures will have a lot of weight. For this reason, there is a method of making lightweight large-sized sculptures. You can also decorate and revitalize your garden with boulders. different size. In order to make them, you need to take a wire and tie a light and unnecessary material into a very tight ball ( plastic bottles, clipping polyurethane foam, Styrofoam). The base you have received should be wrapped with a plaster mesh and covered with a thick layer of cement. The more protrusions and irregularities you get, the more natural and natural the stone will look. And small garden figurines you can make from a mixture of cement with the addition of gypsum or portland cement. In this case, you can apply the manufacturing methods described above, and also any basis: clothing items, old unnecessary toys, household utensils).

Step-by-step instructions for making: 3 master classes

Below we will present cottage crafts made of cement, which you will be happy to do with your own hands. Just prepare everything you need, and also be patient. In this case, you should be fine. In order to analyze in more detail all the existing nuances of this work, we will try to consider in this section the best master class with a step-by-step explanation of the work being done.

Spectacular flowerpots made of fabric and cement.

In order to make flowerpots for your garden from fabric and cement, you can use either Portland cement or pure cement mortar without any additives. In this case, the mixture with the addition of water should turn out to be very liquid. In addition, you will need a bucket or other container for the frame, a piece of cloth and a piece of polyethylene.

The material must be very dense and perfectly absorb liquids. In this case, synthetics are simply not suitable for these works. It is best to use cotton fabric.

First you need to cut a piece of the fabric you need. If you need smooth edges, then you should round them.

Then you need to moisten the cloth well in the cement mortar.

A PVC film should be fixed on the prepared container.

From above it is necessary to lay out and smooth the matter moistened with cement mortar.

After a couple of days, the cement will completely set, and you can remove the bucket without any difficulty.

The finished product must be slightly moistened with water and left to dry completely for 5-6 days.

In the finished flowerpot you can plant even large plants.

Funny cat for the garden.

First you need to prepare a frame from wooden slats and a cut plastic bottle. Next, we will fasten them with wire. The solution should be made from sand and cement in a ratio of 1 to 1. Gypsum can be added during work. Being engaged in the gradual application of the solution, it is necessary to create all the details of the sculpture. The finished figure should be polished with a wet hand and left to dry for 3-4 days. The final touch is painting with water-based paint or enamel.

Large drinking bowl for birds and pets.

A very interesting and versatile decoration for your backyard will be a sheet of cement. On a small mound of sand, you need to lay a PVC film, then a large sheet. (the mound will help us get a figure with a slight indentation, but not a flat one). If you find small holes in the sheet, then they need to be closed with small leaves so that the cement solution does not leak. Then the sheet should be covered with a thick layer of mortar. And insert a small piece in the center plastic pipe and then filled with cement. This will serve as the leg of our leaf. For 2-3 days, the workpiece must be covered with a film until it dries completely. Then you need to remove the sheet, prime and paint the finished product.

Summing up

We hope that now you can create beautiful crafts from cement for the garden. Decorate your yards with something beautiful and draw attention to them.

www.svoimi-rukamy.com

Before that, only a madman could think of! But the idea of ​​making things out of cement is awesome...

House Ideas Interior Apartment Construction Handmade

Cement is a completely unsuitable material for crafts, this opinion is very common. But people who are selflessly in love with construction have proved the opposite! Looking at these things, I want to buy a bag of cement immediately.

Now not only men, but also women can play the builder - cute little things that will decorate the interior will not leave anyone indifferent.

Having received a functional thing made of cement as a gift, your friend will understand that your friendship is the strongest in the world. Open your mouth in amazement and enjoy these ideas. I dream of a concrete phone stand...

Crafts from cement

Thanks to creative people work in different areas life, such wonderful ones appear, non-standard solutions.

Now you know how many incredible things can be done from ordinary cement. Yes, it's insanely inspiring! Share this inspiration with your friends, help them go beyond the ordinary.

takprosto.cc

DIY unique garden decor - cement leaves

Sometimes one unusual detail is enough to make the garden sparkle with new colors and begin to attract the attention of neighbors and guests.

Recently I was at the dacha of one of my good friends. This woman simply has golden hands, because what I saw on her site is beyond praise. Evgenia loves plants very much and draws inspiration from nature. Her new find is the creation of a unique garden decor in the form of cement leaves.

We, inspired by this idea, offer you an affordable step by step master class, which will help you make such an amazing garden decor with your own hands.

WILL NEED

• big leaves
• metal grid
• cement mortar
• acrylic paints
• rubber gloves

MANUFACTURING

First you need to find a large rhubarb leaf or any other large leaf.

We cover the sheet cement mixture.

After the first layer, we cover the product with a metal mesh, the size of which is smaller than the finished product.

Then we cover the workpiece with another layer of cement.

When the product is completely dry, turn over and remove the leaf of the plant. To do this, you can use a soft brush or a razor blade. The main thing is not to scratch the future decor!

If you have a personal plot, then you probably want to equip it beautifully and in an original way. But still, most decorative garden items are expensive. And besides this, they can not be called durable. For those people who have a well-developed inner fantasy, they may well make interesting crafts for their garden from ordinary cement. This material differs from others in its high resistance to various types of natural influences (hail, frost, bright sun, water), but also in its availability.

The nuances of working with cement mortar

After reading this publication, you will learn how to create crafts from cement for the garden with your own hands. Below we will offer you only the best ideas. In order to decorate your backyard plot in an original way, you can use planters, flower pots, all kinds of figurines of fairy-tale characters, and you can also make various objects of the plant world from cement with your own hands. This material does not belong to the category of capricious, but many people have either little or a lot of experience with it. Despite this circumstance, there are a number of basic rules that should be observed when working with cement in order for crafts to be durable and of high quality.

As for the manufacturing technology itself, sweep, it consists of the following:

First you need to prepare the main elements for the job: building sand, cement, tile adhesive and water (for the best plasticity and the lowest risk of microcracks). For one part of cement, you need to take two parts of sand and one part of glue. At the very least, it is necessary to add two hundred and a solution to the water in small portions to the consistency of thick sour cream. It will be much more convenient to work with this mixture: it will not drain, but it will remain very plastic.

All products made from cement will require a long drying time. This process can take up to seven days. In order to prevent the surface from spreading, the finished product must be covered with a PVC film. And in order to give the product a correct and beautiful shape, you need to place the base on a small hill of sand, or deepen it a little. After the product has completely hardened, its surface should be coated with a primer. And only after the end of this procedure, you can start applying paint and varnish.

If your craft has any bumps and roughness, then before priming it, you should finalize the product with a file and sandpaper.

In addition to cement mortar, concrete is used. This material is distinguished by the presence of large fractions (gravel or pebbles), and also by high strength. Crafts made of concrete for a garden plot can be in the form of large monolithic boulders. In addition, concrete is very convenient to use for making the base for all kinds of compositions (a pedestal for a sculpture or a platform for a fountain).

There is another material that is very similar in its use. This is plaster. Yes, it is worth noting that it does not have such strength as cement, but it is decorative and more plastic. With it, you can make hollow figures. For garden creativity, molding, architectural and acrylic types are used. When working with gypsum, it is necessary to take into account its very fast solidification. Often, this material is advised to be added to the cement mortar for the manufacture of sculptures.

The most interesting cement crafts will be presented in the photo. And you will really be convinced of this. If you don't have the experience to use cement for decorative purposes, you can start making something simple. The very first products in your garden can be multi-colored balls, flower pots of interesting shape or cute mushrooms.

In order to make a mushroom, you will need to find an old rubber ball. It is from its diameter that the size of the future mushroom cap will depend. In addition to the ball, you will also need a plastic bottle. It will act as the basis for the legs of the mushrooms. Its size must necessarily be proportional to the size of the hat. In addition to the bottle and the ball, you will also need a metal rod to attach the cap to the stem of the mushroom. The ball must be cut into two halves. One of them must be installed on a bucket of sand and pressed evenly. Then it is necessary to pour cement mortar into the resulting form and level it. At a plastic bottle, you need to cut off the neck and bottom, and insert it into the filled form in the center, approximately immersing it by one or two cm. Next, using a long metal rod, you need to connect the cap of the future fungus to the leg and fill the cavity inside the bottle with a solution. Two, three days the finished product must harden. Then you need to remove a piece of the ball and a plastic cylinder.

Mushrooms of different sizes in the form of a small clearing will look very nice on the garden plot. In addition, it should be noted that your own imagination may prompt you to use other containers (jars, bowls). You just need to make an openwork ball that will seem airy and light. You can use a balloon as a base. All sizes of your future figures will depend on how much you inflate the balloon. Then you need to place any rope in the prepared solution and wrap the ball around. In this case, you do not need to wrap the base very tightly. It is necessary to leave small holes for the subsequent extraction of pieces of the burst ball. After your product is completely dry, you can start decorating. If you cover the balloons with a small amount of cement mortar with the addition of gypsum, then you can get very interesting and original garden lanterns or flower pots.

Using this technology, you can also make beautiful vases for dry flowers. In this case, not only the outer, but also the inner side will be decorated. If you pour the solution into a small hole in rubber balls, then as a result you can get monolithic balls of various sizes. Scattered in a chaotic manner and painted in a variety of colors, they will look stylish and concise. If you use plastic containers in the manufacture of products, you will be able to get a planter for a fat woman, cacti or Crassula Ovata as a result.

The container should be wrapped in PVC film, and a bag filled with sand or clay should be placed inside so that the container can hold its shape. Then it must be covered with cement mortar. After it is completely dry, you need to remove all auxiliary materials. And in the bottom, with the help of a drill, you need to make special drainage holes. Then the product should be coated with a primer and paint. It is quite simple to make a flowerpot using a vase or bucket. One container should be inserted into another, and the solution should be poured into the space formed between them. As a result, you will get a beautiful product. You can decorate it as you go. It just takes a little imagination.

Those cement crafts that are in this article are painted step by step. Our instructions will help you make beautiful products to decorate your summer cottage. Flowers that are planted in a flowerpot, in the form of crossed palms of the hands, will look very original.

In order to make this masterpiece, you will need rubber gloves. They should be evenly filled with mortar. And for rigidity, a metal bar must be inserted into each finger. In order for the product to come out of high quality, you need to try to prevent the formation of air bubbles. After the gloves are completely filled with the solution, they need to be shaped and fixed. After a couple of days, the rubber should be cut and removed. If you need to connect two palms together, you should use the same solution for this. Well, in the end, the surface must be polished with sandpaper, primed and painted.

Complex figures with a frame

Our cement garden crafts are able to attract the attention of everyone. If you do everything right, then your garden will be filled with new colors. It is more interesting to decorate your summer cottage with sculptures of mythical characters and animals. These masterpieces will involve the preliminary construction of a very strong frame and the application of cement in layers.

Very original flowerpots can be made using buckets from the building mixture. At the initial stage, the container of the required size should be wrapped with a plaster mesh and covered with a thick layer of cement mortar. At the second stage of these works, before the mortar is completely hardened, it is necessary to carry out a decorative adjustment, thus making an imitation of an old stump with natural wrinkles on the bark.

Next to artificial reservoirs, it would be quite appropriate to place a monolithic figure of a hippopotamus. But as for the place for the location of the sculpture, it must be determined immediately, and properly aligned, since in the future, the figure will be stationary. As a frame, 2 elongated basins can be suitable, which should be fastened together with a wire. You can come up with another option: a very thick cement mortar must be covered on top of a large pile of broken bricks or rubble. As for the figure itself, it will not contain very complex elements. It's pretty easy to make. After the cement has completely hardened, the figure must be treated with a special fixing impregnation, or with a dry pigment for concrete, carefully rubbing the powder with a sponge.

The most complex sculptures are made in several stages:

1. First you need to make a frame of foam, wire or containers.
2. Then the blank is covered with a plaster mesh.
3. Then the mixture is applied in several layers.
4. Next, small details are formed (clothes folds, facial features, clear texture, etc.).
5. At the last stage, the primer and painting of the finished work is carried out.

Flower vases in the form of swans will be a very beautiful and elegant decoration of your garden. An old plastic basin will serve as the body frame of the future swan, and the neck will be made of interlaced wire. You will need to make wings, head and imitation plumage from cement mortar.

Powerful monolithic figures will have a lot of weight. For this reason, there is a method of making lightweight large-sized sculptures. You can also decorate and enliven your garden with boulders of various sizes. In order to make them, you need to take a wire and tie a light and unnecessary material (plastic bottles, cutting foam, polystyrene) into a very tight ball. The base you have received should be wrapped with a plaster mesh and covered with a thick layer of cement. The more protrusions and irregularities you get, the more natural and natural the stone will look. And you can make small garden figurines from a mixture of cement with the addition of gypsum or Portland cement to it. In this case, you can apply the manufacturing methods described above, and also any basis: clothing items, old unnecessary toys, household utensils).

Step-by-step instructions for making: 3 master classes

Below we will present cottage crafts made of cement, which you will be happy to do with your own hands. Just prepare everything you need, and also be patient. In this case, you should be fine. In order to analyze in more detail all the existing nuances of this work, we will try in this section to consider the best master class with a step-by-step explanation of the work being done.

Spectacular flowerpots made of fabric and cement.

In order to make flowerpots for your garden from fabric and cement, you can use either Portland cement or pure cement mortar without any additives. In this case, the mixture with the addition of water should turn out to be very liquid. In addition, you will need a bucket or other container for the frame, a piece of cloth and a piece of polyethylene.

The material must be very dense and perfectly absorb liquids. In this case, synthetics are simply not suitable for these works. It is best to use cotton fabric.

First you need to cut a piece of the fabric you need. If you need smooth edges, then you should round them.

Then you need to moisten the cloth well in the cement mortar.

A PVC film should be fixed on the prepared container.

From above it is necessary to lay out and smooth the matter moistened with cement mortar.

After a couple of days, the cement will completely set, and you can remove the bucket without any difficulty.

The finished product must be slightly moistened with water and left to dry completely for 5-6 days.

In the finished flowerpot you can plant even large plants.

Funny cat for the garden.

First you need to prepare a frame from wooden slats and a cut plastic bottle. Next, we will fasten them with wire. The solution should be made from sand and cement in a ratio of 1 to 1. Gypsum can be added during work. Being engaged in the gradual application of the solution, it is necessary to create all the details of the sculpture. The finished figure should be polished with a wet hand and left to dry for 3-4 days. The final touch is painting with water-based paint or enamel.

Large drinking bowl for birds and pets.

A very interesting and versatile decoration for your backyard will be a sheet of cement. On a small mound of sand, you need to lay a PVC film, then a large sheet. (the mound will help us get a figure with a slight indentation, but not a flat one). If you find small holes in the sheet, then they need to be closed with small leaves so that the cement solution does not leak. Then the sheet should be covered with a thick layer of mortar. And insert a small piece of plastic pipe into the center and then fill it with cement. This will serve as the leg of our leaf. For 2-3 days, the workpiece must be covered with a film until it dries completely. Then you need to remove the sheet, prime and paint the finished product.

Summing up

We hope that now you will be able to create beautiful cement crafts for the garden. Decorate your yards with something beautiful and draw attention to them.

Any personal plot can be revived with crafts from stone materials. Original do-it-yourself figures made of concrete are a clear confirmation of this. Such products tolerate dynamic loads well and retain an attractive appearance for at least 40 years.

At one time, concrete was used exclusively for the construction of houses, airfields and roads. Today it is also used in decoration. adjoining territories. This is facilitated by the fine-grained structure and the optimal hygroscopic moisture content of the material. Especially popular among amateur sculptors is architectural concrete. It is famous for its greater resistance to moisture and aggressive alkaline environments.

Cement garden figures create unlimited zoning possibilities suburban areas. Even if the most common mixture is used gray color, it is important to make the solution correctly:

1. Mix sand, crushed stone, gravel and cement until completely homogeneous.
2. Dilute the mixture with water. It is important to remember that after adding the liquid, it will decrease slightly in volume.
3. It is better to mix all components with a perforator or drill, and if you need to make large garden figures from concrete, then concrete block.
4. The amount of materials depends on the brand of cement. For example, when using M-300, 2 kg of sand and approximately 3.8 kg of crushed stone go to 1 kg of cement. If there is M-200 cement at hand, the amount of crushed stone and sand must be increased by 0.9 kg.

Video "DIY garden crafts"

This video will show you how to make several interesting jewelry for the garden with their own hands.

Necessary equipment for concrete crafts

Shovels, scales, watering cans, hammers, buckets and dyes will come in handy in the work. The latter are needed to color the mixture in red, blue, purple, or, for example, green color. Ready-made fiberglass molds for crafts will help you quickly and better recreate the images of legendary characters.

For implementation frame technology with your own hands you will need a metal mesh, foam or cardboard. If you need to fasten individual elements sculptures, it is better to use a wire with a diameter of at least 8-10 mm.

Master classes

Concrete will make unusual vases and stands for living plants. To this end, experts recommend taking old shirts, sheets and towels as a basis. First you need to soak them in a solution of cement. After 10-15 minutes - hang on stands and wait for complete hardening. Optimum temperature air for solidification of figures - 30-35 ° C above zero.

After 2 weeks, it will be possible to plant tulips and hyacinths in ready-made flowerpots. If so unusual craft the owners plan to decorate the area near the fountain or pond, it is better to use wild rose seeds.

For a frame that imitates the body of animals, 5-liter plastic bottles are suitable. The wire will serve as a mustache, and well-crafted foam plastic will serve as wool for goats and sheep. The shape of the fountain can be repeated by a loosestrife leaf or a balloon. If it is important for the owners to achieve the maximum similarity of crafts with a fabulous insect, the surface of the products will have to be treated with fragments of ceramic tiles.

Cement flowerpot

For the first craft, you will need metal rods, old tights and thin cables. To begin with, cement must be poured into a stocking. To prevent the material from tearing, insert reinforcement into it. Pretty legs and noses are obtained from twisted ropes. A ten-centimeter piece of fabric will be needed to simulate a fabulous beard. Once the cement has dried, the finished gnomes can be polished with plaster mortar.

The algorithm for crafting concrete birds, especially swans, looks like this:

1. We insert a rod bent in the form of a two into the neck of a five-liter eggplant.
2. We fix the “neck” in the bottle with fragments of stones and broken tiles.
3. Expanding plastic container, imitating the sides of birds, with sand.
4. We knead the solution for processing the bottom of the product and the swan neck.
5. We attach wings to the frame from metal mesh. For better fixation of the head and neck, we use gauze bandages.

Completely crafts harden on the seventh day.

Sculptural concrete produces original figurines with wavy hair, deep-set eyes and expressive eyebrows. But since this task is only possible experienced craftsmen, we recommend using old dolls as a template. top toys will have to be cut off, because it is in this part of the flower garden that curly hoya or campanula will settle.

Cement-treated heads, after complete drying, are covered with gray paint. Then apply more light tone. In the future, garden paths and areas near artificial fountains can be decorated with such products.

DIY figures and sculptures

For a large craft, you will need a 20-liter eggplant from under the water. You can use wire as a mustache. At the first stage, it is important to pierce the bottle with a steel cord. This is necessary for better processing of the base with a cement mixture. Next, we fix the wooden planks. They perform the functions of the legs, head and tail of the mustachioed owner of the flowering monastery.

It is better to mix the cement-sand mortar in a ratio of 1: 1. To prevent it from drying out ahead of time, you need to work with gloves. In order to avoid cracks on the head, legs and tail during the drying period, it is important to spray these elements of the product. cold water every 3-4 hours. For coloring finished crafts, water-based compositions are more suitable. They tolerate mechanical loads well, are not afraid of moisture and ultraviolet radiation.

Fairy tale and cartoon characters

If broken toys are lying around in the nursery, do not rush to take them to a landfill. At proper processing rubber and plastic products with a cement mixture, it will be possible to fashion Cinderella, Vasilisa the Wise, Winnie the Pooh, Cossacks and even the legendary Captain Vrungel from them. If you are interested in modern heroes, we advise you to make little ones, fixies, octonauts, and for lovers of exciting adventures - Lady Bug and Super Cat.

Plastic bottles, polystyrene foam, aluminum rods, spatulas and paints will definitely come in handy in the work.

Such figures look great in children's arbors and in the garden, surrounded by evergreen giants and fragrant beds.

Here, the main thing is to follow a clear sequence of actions:

1. Cut off a large leaf. To prevent water from flowing out of the drinker, plants without a tail are preferred.
2. Mix the cement-sand mortar in a ratio of 1:3.
3. Place a burdock leaf on a sandy surface. It is important to get a small hill the size of a plant. Before that, she needs to be covered. plastic wrap.
4. Coat the sheet with a thick solution.
5. Decorate the concrete surface with colored glass. If there are none, hammer a couple of dozen bottles of drinks with a hammer.
6. After 7-10 days, remove the dried leaf.

Candle stands

For home creativity, you will need cookie jars, M-300 cement, three-dimensional forms to create the desired texture, glasses, glue and sandpaper. The first step is to free the jars from the contents, wash and dry. Considering the optimal length of the candles, cut off the excess parts with scissors.

Inside the products you need to place patterned napkins. For their better fastening Use building glue. Next, mix the solution. The mixture should be viscous and homogeneous. And since the highlight of any composition is not only diverse, but also multi-colored elements, use a coloring pigment.

After the mixture is in jars, candle cups are immersed in concrete. After 3-4 days it will dry, after which it will be possible to remove the cardboard, napkins and molds. Sandpaper will deal with unevenness.

Other interesting ideas for concrete crafts

Thanks to excellent physical and chemical properties material with its help, it is really possible to lay a mushroom plantation, a flower bed and even a stone garden. In the latter case, it is better to take polyurethane foam as a basis, from which it will be possible to mold a square or circle. After that, you need to prepare a cement-sand mixture with the calculation of 3 kg of sand per 1 kg of cement. Next, we improve the form. To fake diamond had more similarities with natural, it should fit in plastic bag. So you will be able to create original prints.

After the final drying, we proceed to grinding and decorating products. To this end, experts recommend water compositions of red, yellow, brown and green. P80 sanding paper will add more realism to finished crafts.

How to effectively use crafts in the exterior

Concrete figures may differ in shape and purpose. Small items look better along walking paths and on terraces. It is better to decorate the front part of the local area with large ones.

Around the concrete fountain, you can equip a recreation and sleep area. Blooming flowerpots will always find a place on the porch and on the steps of street stairs.

it The best way improvement of stone-lined areas where it is unrealistic to plant even the most unpretentious plants.

Cement is not only unique construction material for the construction of buildings and structures. Cement is also an excellent substance for making all kinds of household items: flowerpots, tables, stools, garden paths, sculptures, etc.

What can be made from cement on their own?

Given the low cost and excellent plasticity of the cement-based solution, crafts from this material limited only by the imagination of the master. At the same time, all crafts are not “dust collector trinkets”, but have one hundred percent practical use. Below are a number of options that, no doubt, will certainly interest everyone. home master"with arms and head."

Cement garden path

You will need the following tools and materials:

• Special forms (can be purchased at any hardware store);
• Cement mortar prepared according to the following recipe: 3 parts of sand, 3 parts of gravel, 2 parts of M400 cement, water - about 0.5 of the amount of cement;
• curbstones;
• Polyethylene film;
• Reinforcing mesh. A steel mesh is suitable, cut to shape for plastering;
• Color for concrete (if necessary, get a color track);
• Equipment for the preparation and leveling of concrete mortar: container, shovels, buckets, trowel, spatula, building level.
• Materials for marking the track: twine and metal or wooden pegs.

The main stages of pouring the garden path:

• Marking and digging trenches;
• Installation of curbs and backfilling of the pillow with sand or granotsev;
• Setting forms by level. Forms are pre-lubricated with machine oil or a special release solution;
• Preparation of cement mortar. If necessary, a color for concrete is added to the solution (proportions according to the manufacturer's instructions);
• Filling the mold up to half, laying the reinforcing mesh, final pouring, tamping and leveling the surface;
• Having covered the filled forms with plastic wrap for 72 hours. In hot weather, the surface of the track must be regularly moistened with water by spraying;
• Dismantling the molds, filling the seams with sand.

From cement, or rather their cement mortar, you can make a designer one: a countertop, a stool and even a sconce lamp.

Designer worktop made of cement

The solution for pouring the product is prepared according to the previous recipe. Reinforcement is also according to the previous recipe. The dimensions of the craft in terms of are taken either according to the existing table frame, or the tabletop is first made, and then, according to its dimensions, the frame with legs is made.

You will also need to make a mold for filling. As a mold material, you can use moisture-resistant plywood for the bottom of the mold and wooden slats 40x40 or 50x50 for edging and ensuring the thickness of the product: 40 or 50 mm, respectively. Consider the main stages of filling:

• Lubrication of the inner surface of the mold with a release agent and setting it level on bricks or a flat surface;
• Solution preparation;
• Fill to the middle of the border;
• Laying reinforcing mesh;
• Final pouring, vibrating, leveling and covering with plastic wrap for 72 hours;
• Careful disassembly of the form, cleaning, chamfering, installation in a cool shaded place until it is completely dry.

Designer stool made of cement

You need a conical shape. A round plastic bucket is suitable, in which they sell water-based paint, glue, etc. In addition, you need to pick up three legs. Suitable wooden circle with a diameter of 35-40 mm.

The length of the leg is taken with a margin for fine trimming: 450 mm (stool height), 0.5 of the thickness of the concrete seat - 50 mm, fine trimming tolerance - 25-30 mm. Total 525-530 mm. The steps for making a designer stool are as follows:

• Form preparation - lubrication with a release agent;
• Preparation of concrete solution. Similar to the previous options;
• Filling the seat with a thickness of 100 mm;
• The introduction of the legs into the uncured solution to a depth of 50 mm, with a slope of several degrees from the center in different directions;
• Exposure within 72 hours;
• Removal of a stool;
• Cut legs to size. Chamfering;
• Finishing the seat - sanding and chamfering.

Designer sconce lamp made of cement

You will need the following materials:

• Cement mortar similar to the previous options;
• lamp holder, lamp, electrical plug, electric switch and electrical cord
• Plastic bottle with a capacity of 2.5 and 1.5 liters;
• Emery skin;
• White paint on concrete;
• 2 self-tapping screws for wood or metal, 50-60 mm long;
• Steel tube, 120 mm long, with 3/8" threads on both ends and 4 3/8" nuts to it;
• Scissors, drill with a diameter of 10-10.5 mm, hand or electric drill, spanners, mortar preparation tool, screwdriver.

Where to start for making a lamp:

• Cut off the bottom of the bottles with a knife or scissors;
• In the necks of the bottles we drill holes with a diameter of 10 or 10.5 mm;
• We fasten a threaded tube to the caps so that there is a distance of about 80 mm between the caps, and the ends of the tube protrude from the top of the bottle cap by 2.5 liters and the bottom of the bottle cap by 1.5 liters by about 20 mm;
• We wind the bottle caps in the format - “a 1.5 liter bottle inside a 2.5 liter bottle;
• Stepping back from the edge of the bottom of a large bottle of 2.5-3 centimeters, we connect both containers with self-tapping screws in the “one opposite the other” format;
• We knead the solution and fill the space between the containers;
• We leave for 72 hours. We heat it with a hairdryer, cut and remove the bottles, process the “plafond” with sandpaper, paint inner surface ceiling with white paint.

Next, collect wiring diagram, consisting of: a plug, an electrical cord, a switch and a cartridge, make a simple cantilever bracket from wooden slats, paint it with white paint, hang a lamp on it and strengthen the resulting exclusive design on the wall.

In addition, you can make, from cement, as well. Turn on your imagination and you will succeed.