How to make a spinner with your own hands: the easiest way. How to make a do-it-yourself spinner without a bearing: the best workshops Ways to make a spinner

All social networks are filled with photos of all kinds of spinners, so there are no problems with the question of what it is. Moreover, this rotating thing has become a trend in 2017, and the variety of their types, options and possibilities will not leave anyone indifferent.

There are turntables of different price categories from 29 rubles to several hundred thousand, but it is becoming more and more popular to make them yourself. It is more interesting and cheaper, and "your" toy is also unique and unusual. How to make a spinner at home - read this article.

What is it and why?

The spinner is an original fashionable anti-stress toy, also called a hand spinner and spinner. Its device and mechanism of action is simple: in the center there is a metal or ceramic bearing, and around it there are several blades or weights.

True, toys are now being modernized with might and main, experimenting with colors, materials, shapes, speakers, and even embedding a Bluetooth system for synchronization with a smartphone. Glow-in-the-dark spinners have also become widespread.

Both ordinary adults and psychologists argue about the functionality and benefits of spinning things. A consensus has not yet been reached, but most tend to believe that spinners have the following positive characteristics:

• Calms in stressful situations;
• Helps to concentrate;
• Develops children's motor skills;
• Copes with nervous and mental stress;
• It becomes a great alternative to bad habits;
• Causes desire to collect and collect;
• Promotes communication.

The danger of modern toys lies in its ever-growing popularity, as schoolchildren begin to invent and implement rather extreme tricks for the sake of spectacular videos. Also, turntables can distract from study, develop unhealthy competition.

However, if a child or an adult is on fire with the idea of ​​​​creating a spinner with their own hands, then here we can only talk about its undoubted benefits. Indeed, in the process, motor skills, logical thinking will definitely develop, and fantasy and creativity will reach a new level.

Instructions on how to make a do-it-yourself spinner

Mentally, the whole process of creating a spinner can be divided into four stages: thinking through the design of the toy, drawing up a drawing and diagram, preparing the necessary materials and directly working on the product.

Each stage is important, so let's look at them in more detail.

Step 1 - Thinking over the model

Here you need to decide what your future spinner will be: classic or unusual, paper, plastic or iron, simple or complex, and so on.

Based on this, an algorithm for further actions will be built.

Step 2 - Making a drawing

You can’t count on the eye, so it’s better to display your imagination on cardboard and remember your drawing skills.

If you don’t like working with pencil and paper, then go the easy way and look for ready-made schemes on the Internet, print out the one you like and start preparing materials.

Step 3 - Gathering Everything You Need

The materials from which you can build a spinner are striking in their variety, which allows you to choose the most suitable option. So, the basis can be paper, cardboard, electrical tape, chips, coins, solid wood, children's designer or soda caps.

“Tools” will help in translating fantasy into reality:

• Bearings;
• Scissors or stationery knife;
• Pen, pencil or felt-tip pen;
• Adhesive suitable for the type of material;
• Jewelry (rhinestones, gouache, stickers, etc.);
• Devices for working with wood (centimeter, hacksaw, jigsaw, chisel, sandpaper, drill, etc.)

The bearing can be removed from an old skateboard, a bicycle of non-functioning equipment (washing machine, printer, fan) or bought in a store where its price usually varies between 20-50 rubles. The diameter of the part is proportional to the size of the future toy, and a value of 2 cm is considered universal.

It is important to properly prepare the materials in order to enhance the capabilities of the product. So, bearings bought in a store should be removed from factory grease, since it is harmful for a toy: it stains hands and slows down rotation.

Extraneous plaque is removed simply: dust protection rings are removed, bearings are filled with gasoline to an unnecessary container and left in the liquid for several minutes, during which it is recommended to shake them.

Step 4 - Getting Started

When the choice is made and the tools are collected, you can get to work. Below are the simplest and lightest designs of spinners, having understood the structure of which, it will not be difficult to improve the technique with other materials.

Note!

paper spinner

In the simplest model of a turntable, the bearings are replaced with an axle, and the solid body is replaced with paper or cardboard. Making a paper spinner is easy and fast:

1. Prepare two paper squares 15x15 cm (preferably different colors), a toothpick and clip caps from the cap of the pen;
2. Fold each square in half, then bend their corners obliquely;
3. Lay the two pieces on top of each other so that they are perpendicular
4. Bend the triangles inward as follows: first the right one, then the top one, then the left one, and wrap the bottom one under the very first one;
5. Pierce the middle with a toothpick, expanding the hole by 1 mm;
6. Fasten the rod with clamps on both sides of the axle and cut off the excess ends.

Cardboard spinner

Spinners without bearings also include cardboard products. For a three-blade model, we make a drawing of four circles in the shape of a triangle on cardboard, cut out two copies, as well as four smaller circles. On one half we place coins of suitable diameter and glue them, and fix the upper part on top.

With nail scissors we make a hole in the structure and similarly in two small circles.

We put 1 cm of the plastic rod of a ballpoint pen into one of the circles, fix it with glue, put the rod into the spinner and close it with the second circle. The remaining third and fourth circles are fixed from above.

Bearings and bottle caps

A more complicated version is a model assembled from plastic bottle caps (from 4 to 7 depending on the number of blades) and four bearings.

Note!

You will also need tools: glue gun, drill, knife, sandpaper.

The technology looks like this:

• We grind corks with sandpaper to remove bumps and roughness;
• We cut a hole to match the bearing in the axial cover;
• We place the remaining caps around the center at the same distance from each other (for greater accuracy, it is recommended to use additional caps or a paper drawing);
• We glue the corks together, not forgetting the smooth transition between them and the central cover;
• We insert the bearings into the remaining covers, fix them inside with a layer of glue;
• We decorate and decorate the product.

Spinner cleaning

Instead of making or buying a new spinner, you can always fix the old one.

Failure is usually of two types: damage to the housing and contamination of the bearing.

In the first case, any super glue will come to the rescue, you can clean the metal ball with WD-40 and alcohol, not forgetting to eventually lubricate the bearing with synthetic oil. In general, the following algorithm should be followed:

1. Disassemble the toy, fixed with a thread, by fixing the lower part and unwinding the upper one.
2. If the lid is fastened with magnets, then you should pick up the top with a thin object through the visible joint and lift it up.
3. Release the bearing by easily removing the plastic or metal baffle.
4. If the part is fixed with sealant, then it is not necessary to chip it off and get it out. In such cases, the entire body is cleaned with isopropyl alcohol.
5. Pour the cleaner onto the balls and twist them with a toothpick or match to completely and evenly distribute the liquid.
6. Rinse the bearing, leave to dry, avoiding the ingress of lint and dust inside. You can use a hairdryer.
7. Lubricate the part with one drop of oil.

Everyone can make a spinner at home, because its device is clear and simple, and any available materials can serve as a body and a rotating rod.

Note!

It’s better to start with paper models, gradually improving your skills, and who knows what features and capabilities you will enrich your toy over time?

Photo of modern spinners

Children and adults are delighted with the popular ball bearing toy - the spinner. There are many varieties of them from different materials. Learn how to make a spinner at home.

How to make a paper and cardboard spinner

To make a do-it-yourself spinner, you will need certain materials and skills to work with them. The simplest for execution are models made of cardboard and paper. Their only drawback is fragility and fragility.

You will need:

• cardboard;
• scissors;
• awl;
• marker;
• silicate glue;
• coins of the same denomination - 3 pcs.;
• empty rod from a ballpoint pen;
• gouache paints and glitter.

Step by step instructions on how to make a spinner:

1. Draw a blank on the cardboard. To do this, circle the PET bottle cap with a marker, forming a triangle with a central (fourth) circle in the middle. Cut out two identical blanks.
2. Glue three coins on the "blades".
3. Glue the second piece of cardboard on top.
4. Make a hole through the center of the workpiece with an awl.
5. Cut off about a centimeter from an empty (without paste) ballpoint pen refill.
6. Cut out four circles smaller than the lids. To do this, you can circle small coins. In two circles, make through holes with an awl.
7. Insert a centimeter rod into one circle and glue. Then thread the free end of the rod through the central hole of the spinner blank, glue it. Insert the free end of the rod into the second cardboard circle.
8. Hide the ends of the rod, to do this, glue the two remaining whole cardboard circles on top of them.
9. Color the craft with paints and decorate with sparkles.

How to make a spinner from plastic caps

Spinners made of plastic are much stronger than cardboard ones. Children over 8-10 years old will be able to make a spinner out of caps with their own hands. The younger ones will need parental help.

To make a craft, you will need:

• lemonade lids - 4 pcs.;
• plasticine or clay;
• scissors;
• glue gun and glue stick;
• nail and lighter;
• toothpick.

Step by step description:

1. Fill the hollow space inside the three covers with plasticine, and fill the top with glue from the gun.
2. Poke a hole in the center of the fourth cover with a nail. To do this, heat the sharp end of the nail with a lighter.
3. Glue three covers filled with plasticine on three sides of the fourth with a hole, creating a triangle shape.
4. From the glue stick for the gun, cut two pieces one centimeter long.
5. Break the toothpick exactly in the middle.
6. Attach one end of the toothpick to the cut piece of glue stick.
7. Insert the loose end of a toothpick through the hole in the center cap. Hide the remaining sharp tip in another piece of glue stick.
8. If desired, paint the lids on top with acrylic paints or paste over with appliqués.

As you can see, spinners are quite easy to make yourself. This is a good opportunity to captivate the child for a while and enjoy the result with him.

To create a craft in the form of a fashionable spinner, you will need the usual improvised materials that you can always find at home. Good luck and creativity!

Reading time ≈ 6 minutes

More recently, the market of modern youth gadgets was blown up by an anti-stress toy called a spinner. Despite the large assortment of goods offered on store shelves and online resources, the option to create a do-it-yourself spinner looks very attractive, since it will not only save on the product, but also get the desired spinner according to your ideas and imagination. There are many options for making a do-it-yourself spinner at home, consider the most popular of them.

What is a spinner?

The original name of the toy - fidget spinner comes from the English word spinner, which means rotation or torsion. It consists of one or several bearings, which, by their rotation, help not only pass the time, but also improve finger motility, dexterity and attentiveness. Spinner analogues can be called the good old yo-yo, which at the beginning of the 2000s could be found in the hands of everyone. Now, one of the most popular places among fashion trends is occupied by spinners, according to the dexterity of handling which various championships are already held.

What is a spinner for?

The original purpose of the spinner is a toy for young people, a trinket that helps pass the time, but this spinner eventually turned into something more. As practice shows, the spinner is an excellent assistant in the fight against bad habits. This applies to quitting smoking, snapping fingers and many other unpleasant moments associated with the fact that a person needs to urgently occupy his hands with some business. As a result, spinner spinning has become a real hobby for many people who not only master the skill of spinning toys, but also compete in this aspect with each other.

How the toy works

The main task of this product is its rotation, which should be continuous and occur without much effort. The basis that betrays the rotational movement of the toy is the bearing, which is located in the center. In order for the spinner to spin for a long time and beautifully, it must have the correct shape and reinforcing weight. Typically, three weights are used, evenly spaced from the center, however, spinners can often be found with two or four weights. It is IMPORTANT to note that spinners do not require accumulators and batteries for spinning. If the toy is made in the right way, a light flick of the finger can make it rotate around its central axis. The most important thing in the normal operation of the spinner is the observance of symmetry, because even a slight deviation in the dimensions of the sides with weights will lead to poor and unstable rotation.

How to make a do-it-yourself spinner?

The manufacture of this twister is not a complex technological process that requires special knowledge and tools. The main material is one or more bearings, and there are a lot of options for making the base. The main nuance of this process is the weighting of the edges of the spinner, because otherwise it will not rotate well. Coins, nuts or other bearings are perfect for weighting. An IMPORTANT detail for hand spinners is bearing lubrication, which allows you to increase the rotation speed of the toy several times. It is recommended to lubricate with oils intended for motorcycle chains. If this is not at hand, you can use WD-40.

Wooden spinner

In order to decide on the question of how to make a spinner with your own hands, you first need to decide on the base material. Cool spinners are obtained from a wooden base, which, with proper and high-quality processing, is not much different from factory counterparts. First you need to create a drawing of the future product. It is based on the diameter of the bearing and three weighting agents, starting from these figures in the future. After transferring the sketch from paper to a wooden blank, you need to cut out the future spinner with a jigsaw.

Holes for metal parts are drilled on a special machine or with a pen drill. For ease of use, the workpiece must be carefully sanded and polished. Reliability of the finished toy will be betrayed by fixing metal parts to the base with epoxy or any other glue. In order to make it convenient to spin the spinner on a finger or any other surface, it is recommended to apply decorative overlays to the rotating part of the bearing. From improvised materials, two ordinary buttons of the appropriate size are perfect for this role.

Spinner with 4 bearings

An attractive manufacturing option is to create a do-it-yourself spinner from bearings. Firstly, this method does not require various foreign materials, except for glue and four bearings, one of which will play the role of the central axis, and the other three - weighting agents. Secondly, this method does not require a lot of time, allowing you to get a spinner in 5 minutes of work.

The only difficulty of the process is the poor adhesion of metal parts to each other. For reliable fixation, additional heat treatment will be required, which is often difficult to provide at home. After gluing, excess glue should be removed with a file or needle file, thereby removing all rough surfaces.

Handmade hot glue spinner

Hot glue is a great base for a homemade spinner. For manufacturing, you will need a set of weighting agents, a bearing, hot glue and a base that acts as a flask (usually made of thick paper or cardboard according to the drawing).

An important point is the installation of metal parts strictly in the center of their area. Then glue is poured into the mold and waits for complete solidification there. After hardening, the paper contour is removed and the spinner is polished to a completely smooth surface.

Epoxy glue toy

To make a homemade spinner, you can use not only hot glue, but also epoxy in the hardened floor. Glue in the form of plasticine not only connects the bearing and weighting agents together, but is also the basis for torque.

In this manufacturing process, it is important to correctly position the metal parts, for this it is better to use a pre-marked wooden board with drilled holes and inserted clamps. It is better to remove the main excess glue before it hardens completely, then polishing only small roughnesses.

The simplest and most budgetary option for making a spinner yourself is to work with plastic clamps that are designed to tighten cables. For ease of use, it is recommended to use metal weights of the same diameter as the bearing. Weights are laid out at three corners of an equilateral triangle, as shown in the photo. Around them, a base is created from three screeds closed to each other. Then, each of the weighting agents is also attached to the base with a plastic clamp.

After that, an axial bearing is installed in the middle and a uniform tightening of the clamps begins from the side of each weighting agent. For reliable fixation, the resulting structure is pulled together with three more clamps, from the center to each side of the weighting loads. This manufacturing method, although it is the most inexpensive and fastest, however, the appearance of the finished product is significantly inferior to analogues from other materials.

MDF spinner

Making spinners from medium density fibreboard is very similar in principle to working with a blank of wood. At the beginning of the process, markings are applied on a small MDF sheet, taking into account the placement of metal parts and the overall size of the spinner. Then holes are drilled for the central bearing and weighting elements and a size is adjusted that is close to the final one.

It is worth noting that when processing and drilling an MDF sheet, you need to be more careful and accurate than when working with wood, since this material is fragile and brittle. To give an aesthetic appearance to the finished product, it is recommended to paint it, while before painting the spinner must first be sanded and degreased.

How to make a do-it-yourself spinner at home? - a lot of people are interested in this issue. And not surprisingly, today there is a real boom with spinners. Everyone already knows about them, and everyone wants to spin it. But the prices of normal spinners are puzzling because a piece of material and bearings do not cost that much. There is always a way out - to make a spinner with your own hands.

To be honest, at first I generally thought that a spinner was some kind of spinning toy for cats, and only recently I became interested in what it is and how to make a spinner myself.

The choice fell on the classic three-spinner model, which has a bearing both in the center and on each petal. Bearings along the edges are needed rather, like weights, twisting, holding on to them is not so interesting, and depending on the size of the spinner, not everyone has enough finger length.

spinner bearing

So, in order to make a high-quality do-it-yourself spinner, you first need to acquire bearings. Cheap spinners are most often made without bearings, which is somehow not ice. You can cut it out of cardboard, and twist it on the rod from the handle, but we want everything to be according to Feng Shui).

The most commonly used bearing is designated as 608. This is not some kind of magic number, but simply a bearing brand, there are 607 (less) and 609 (more). The 608th bearing has an outer diameter of 22mm and an inner diameter of 7mm. It is 8 mm thick.

It is used most often at the anchor of the motors of rotary hammers and electric drills. Well, it was found in one of the auto shops. In the same place, by the way, they repaired a puncher with me.

Each bearing was packed in a bag and a small box claiming to be made in Russia. But as it turned out later from a familiar seller, the inscription "made in Russia", as a rule, indicates that he is Chinese ... (Clarification - I live in Tashkent, Uzbekistan, so I do not know how things are with this in Russia)

A high-quality bearing is a very important element of a spinner, because it depends on him how long the spinner will spin, and how stable it will be. Therefore, later the bearings were replaced with similar Korean ones.

Good bearings, but smaller (15mm in diameter and 5mm thick) were used in older hard drives. The rotational speed of the old generation hard drives was 5400 rpm, and the modern 7200 rpm. In modern hard drives, the bearing is located in the motor and is even smaller. On such a bearing, you can make a good high-speed spinner that can spin for a very long time.

Preparing bearings for a spinner

Bearings are sold sealed with dust rings and lubricated. No lubrication is required for the spinner, it will only get your hands dirty and slow down the rotation with its viscosity. Therefore, the lubricant must be removed. This will require 50-100 ml of gasoline.

We dissect the bearings, removing the dust rings from them with something sharp and thin. We throw the bearings into a jar and fill it with gasoline. We leave them in gasoline for a few minutes, then we chat with a jar so that the bearings slosh. Dipping an unnecessary toothbrush in gasoline, we remove the remaining grease from the bearings.

To get rid of the smell of gasoline, you can wash the bearings with soap using the same toothbrush. You can put back the dust rings if you want, but I like the combination of wood and metal more. Now the bearings are completely ready for use in the spinner.

spinner material

Plywood was chosen as the material, as it is the most convenient for processing. It can also be cut from a thick sheet of getinax or plexiglass, but it is easily scratched, so it is difficult to do it neatly. In the bins of the house, a piece of 10 mm plywood was found, from some dead Soviet tape recorder.

I did the markup using a compass, ruler, protractor and pencil. It is important to make a very accurate markup, otherwise the center of mass may then shift and the spinner will hit during rotation. It is more convenient to print a template from paper, cut it out and circle it, this will save both time and nerves.

Making a spinner case

Because Since the classic, curved shape was chosen, a 19mm hole saw was used to cut out the internal roundness and holes for the bearings. It is better, of course, to use 20 or 21 mm, but I simply could not find it on sale.

The crown has a special holder into which the centering drill is inserted. Before drilling large holes, it is better to drill guides of a smaller diameter in the centers of future holes, and then, having fixed the crown in the drill, we drill 6 large holes in a circle and one central one.

Wood crowns have fairly large teeth. They can easily peel off the top layers of plywood. Therefore, if you decide to make a do-it-yourself spinner from plywood, then it is better to drill to the middle, first on one side, and then on the other.

Cutting out the body of the spinner

Now we saw off the excess, of each petal. For this, a jigsaw was used, but you can also use a regular hacksaw. We try to cut as close as possible to the markup, so that later we have to grind less.

Drill holes for bearings

In addition to the outer part of the body, the inner part also needs to be improved, i.e. bearing holes. They turned out 3 mm less than required. Using a round file and guided by the markup, we bore the holes so that each bearing fits very tightly. Of course, it is better to do all this with a boron machine, if you have one.

We adjust the spinner in thickness and skin it

After everything was bored and turned, it was time to bring the found plywood to the thickness of the bearings, i.e. 8mm instead of 10. To do this, on each side of the workpiece, a layer of plywood was removed and it became exactly 8mm thick. Further, the entire workpiece was sanded first with large and then fine sandpaper.

Finished design:

Finger holder

After inserting the bearings and twisting, it was decided to make a holder for the fingers. When drilling holes, there were holey rounds, which just went to this business.

With a sharp knife, a column was cut out of the rail, along the inner diameter of the bearing. Kruglyashki were cut in layers up to 3. The ends of the column were filed off with a file so that round rounds were tightly worn on them. This is what the components of the holder look like:

It remains only to insert the holder into the central bearing, pre-lubricating the joints with glue and waiting for complete drying to enjoy a new toy - a do-it-yourself spinner)

Now you know how to make a do-it-yourself spinner - a rather useless thing, but cool.

Spinner- a newfangled simulator for the development of fingers, stress relief with a bearing in the center. To bring it into working condition, you need to take it by the inner part and unwind the outer one. The spinner will spin around the axis for a while.

The spinner is fun for everyone: for respectable men in expensive suits, and for restless children, the structure does not provide for small parts, and the toy itself does not have sharp corners.

The device has a beautiful aesthetic appearance, various colors. Its compact size allows you to take it with you everywhere.

A spinner is bought for personal use, as an unusual gift for all age categories of people of different status: the item will bring joy and pleasure to everyone.

According to experts, the subject helps people with autism, attention deficit disorder, to concentrate. For hyperactive children who do not know what to do with themselves, it helps to calm down. Some people find solace in the sound of the device vibrating.

In the article you will learn details about the little thing, the history of creation, instructions for use. Also learn how to make a spinner with your own hands.

Kinds

Spinners come in a variety of shapes, sizes, and prices range from a dollar to hundreds of dollars. The toy is made of different materials: metal, wood, plastic. When using a combined material.

Spinners come with three, two petals, smooth and rough.

Plastic ones are larger and lighter in weight than metal ones.

The ceramic bearing contributes to the long-term rotation of the object.

History of occurrence

The fidget spinner was invented by American chemical engineer Katherine Hettinger. According to her, the idea of ​​creating an anti-stress came to her in Israel. Seeing a picture of children throwing stones at police officers, she wanted to make a toy that would occupy the thoughts and hands of the boys, freeing their minds from pranks.

According to other sources, the scientist invented an occupation for her daughter, with whom she could not spend much time due to illness.

In the 90s, a woman offered her invention to manufacturers, but no one took the patent. At present, the device is not similar to the previously invented one.

In 2014, businessman Scott McCoskery created a similar stress relief product. This represented an iron spinning device. Everyone liked the invention, and in 2016 McCoskery filed a patent for himself.

The product appeared on the Russian market in 2016.

What is a spinner for?

The purpose of the spinner is to train the hands, develop the motor skills of children. The device relieves stress, helps to cope with anxiety, concentrate, and calms.

Often, the simulator develops fingers and hands after injuries.

A worthy advantage of the finger spinner is that it helps to get rid of smoking. Monotonous twisting movements soothe and distract from thoughts about addictions.

How the device works

The gadget does not require batteries or accumulators to operate. There is a bearing in the central part. All you have to do is click your fingers and the unit will work. Hold on to the middle with your thumb and middle finger. The machine must be driven with the index finger.

How to spin video spinner

The bearings are of excellent quality. The higher the rating, the longer the spin takes. For a rotating element, a central bearing is enough, the rest serve as a decorative element and weighting to improve balance.

How long does it spin

How long does a spinner last? Rotation time is an important quality and one of the main indicators of the features of a good apparatus. Connoisseurs of quality toys use only expensive bearings, calculated balance and the right materials for long spinner rotation.

It may not seem like much, but trust me, once you spin your first spinner, you will be surprised at how fast you want your spinner to spin faster and longer.

Spinner price starts from the dollar. Inexpensive trinkets rotate for a couple of minutes. The duration of rotation of serious units (using steel, copper, brass) reaches tens of minutes.

The greater the weight of the product, the faster the bearing works and the device rotates, the louder the sound and vibration. Ceramic and combined bearings vibrate less.

How long does it last

There is no single answer to the question of how long a spinner lasts. The criteria for a long service life depend on the materials used, the accuracy of operation, and the absence of mechanical damage. Metal bearings will extend the life of the device for many years.

Those who are skeptical about these toys simply did not try to twist them. One has only to find “your” device, you don’t want to part with it, the lesson is addictive.

Do-it-yourself spinner at home

Making a device with your own hands is not so difficult, follow our advice, watch the video, add dexterity and soon you will rotate the product.

Paper without bearing

A do-it-yourself spinner without a bearing can be made from paper and improvised materials.

Master class of the Plastilin channel.

How to make a paper spinner First draw a drawing: take a round object with a suitable diameter (in the example - a bottle cap), draw a sketch as in the photo.

Then you need to smooth the corners between the circles.

Cut out the shape along the borders.

Attach to cardboard, circle and cut out the second identical part.

You need to cut 4 circles with a smaller diameter.

The coins will serve as a weighting agent. Stick on three parts according to gravity,

Glue on top of the second half with glue.

Make a hole in the center with nail scissors.

This is how the blanks should turn out.

Decorate your toy, paint it in your favorite colors.

Cut off a part of the juice tube and insert it into one of the circles.

Fix with glue, let dry.

We collect our unit.

A circle without a hole is glued on top.

Do-it-yourself paper spinner is ready.

How to make a spinner from improvised materials video

Do-it-yourself wood spinner

If you have golden hands and they know how to use a jigsaw, a drill, you can easily make a wood product. It will turn out smooth, solid, it will be pleasant to hold it in your hands. Below is a ZarkReed channel master class.

spinner bearing

What bearing to take for a spinner? Answer: any. Extract from a broken skateboard, scooter. If the fan is broken, the computer cooler - take it out of there. If there is nothing to disassemble, order online or purchase in a store.

Stages

For beginners, it is best to start with a thin wood material, such as DPS. Production order:

• Draw a drawing.

• Cut out a sketch from paper, attach to a wooden surface, circle.

• Cut, sand the details with sandpaper.

• Drill a hole in the middle - it will turn out neater.

• An important point: the thickness and diameter of the hole in the tree and the bearing must match.

• Coins are sealed with glue.

• The base is painted over with acrylic paints.

• The central part, coins, is threaded and glued.

The spinner toy is ready.

Do-it-yourself wood spinner video

Do-it-yourself glowing spinner

Spinner can also be made luminous with the help of an LED strip and a battery. Stock up on the right ingredients, watch the video and make your own beauty.

If you make this little thing as a gift and give it to a dear person, he will appreciate it! This is a very popular and fashionable direction, you will need to look for those who are indifferent.

Text prepared by: Veronica