Tomatoes after tying

When the tomato bushes in the greenhouse or in the garden have grown and begun to bear fruit, there is a need for support: tying up the tomato bushes. And so how to properly tie up tomatoes in a greenhouse? This procedure is relevant from mid-June to mid-July. If the tomato bushes are not tied up in time, then they can simply break under the weight of ripening tomato fruits. As a result, this can destroy the entire tomato crop. Of course, timely and proper tying of tomatoes will ensure an excellent harvest of tomatoes. You can check it out with your own hands.

It is worth noting that the correct tying of a tomato, like any other procedure associated with growing vegetables, has its advantages and disadvantages. The main disadvantage is that due to tying a tomato in a greenhouse, a disruption in the development of the root system can occur. Indeed, without support, tomato bushes must independently strengthen themselves due to their root system. While tying acts as a "crutch" that supports the plant.

Naturally, such tomatoes will grow and develop beautifully. Them root system will be more powerful, since the roots will be forced to go deeper into the soil, where there is much more moisture and trace elements necessary for plants. In addition, such plants are practically not afraid of short dry periods. After all, they will be able to compensate for the lack of rain with moisture located in the deep layers of the soil. However, the plants will not be able to bear the heavy fruits in the later stages when they begin to ripen. There are still people who know on the windowsill, and we know too!

So, how to properly tie up tomatoes in a greenhouse or garden so that. The main advantage of tying is to ensure that the plants do not deform and break over time. Today, there are varieties of tomatoes for which tying is not a whim of the gardener, but a necessity. This primarily applies to tall varieties of tomatoes. Especially those plants in which the height of the bush is initially quite large.

Tomato tying

Schemes on how to tie up tomatoes

Today, there are many ways to tie tomatoes so that they do not deform and you will learn how to tie tomatoes in a greenhouse correctly.

Of course, there are general rules. For example, garter material. It should be sufficiently wide so as not to dig into the trunk of tomatoes and not violate the integrity of the plant by friction. At the same time, it doesn’t matter how you tie the tomatoes: with a rope or fabric ribbons. For tying, do not use hard material, such as wire or fishing line. As a result, such material will simply cut the stem of the plant and lead to the death of the crop. The material for tying should be updated annually. Today this is not a problem, since everyone has improvised means. For these purposes, shreds of any fabric, such as a torn sheet, or old nylon tights, are perfect. Well, if you have a greenhouse, then we will tell you simply and quickly.

To properly tie tomatoes in a greenhouse, you need to have not only tying material, but also wooden stakes, which are perfect for the role of a “crutch”. The stakes should be placed not far from the bush to be tied up: at a distance of 10 to 15 centimeters from the stem of the plant. Before tying the bush, you should make sure that the pegs are firmly held. They should be driven to a depth of 20 centimeters. If this is not done, then the stakes will not be able to provide the plants with normal support. As for tall tomatoes, not only wooden stakes, but also metal fittings can be used to tie them up. Indeed, in such a situation, the load on the support increases significantly.

Tying a tomato

After preparing for the process, you can start tying tomatoes in the greenhouse. Wrap the stem of the plant with garter material to create a loose loop. Twist the ends several times and wind them to the peg. You should not tie knots, as it will be quite difficult to remove a piece of fabric or a rope from a plant. Do not tighten the loops too tight, as this will only harm the plants. In addition, after a couple of weeks, the garter will need to be re-tied. After all, the bushes grow and their height will increase more than once. Like these ones simple tips and recommendations on how to properly tie up tomatoes, tomatoes in a greenhouse or garden, but after you grow them, you can always do it yourself. Thank you and good luck!

How to tie up tomatoes video

To properly grow tomatoes, it will take a lot of effort, from planting to a competent garter. Every tiny moment can affect yield, quality, and even how soon ripening begins. Tomatoes need to be tied up in order to promote abundant fruiting, since if the branches break, this will stop the flow useful substances to the fruits, and can even cause rot, falling off of the ovaries and dying off of the branch. Each gardener should be familiar with how the garter is carried out, at what time, and how to avoid mistakes. Only in this case, you can achieve an excellent result.

Tomato tying is the process by which stems and branches are attached to special support using ropes, fabric strips, plastic stems. You need to tie up the tomatoes immediately, after pinching has been carried out and the ovaries have formed. As the bush of tomatoes will gradually increase, tying is required several times.

In addition, you should not think that the plant requires additional fastening only if it is too high, since absolutely all bushes require this procedure.

Not only the stems themselves are tied up, but also the branches on which the fruits are laid. In special cases, it may be necessary to strengthen each branch if the fruiting is very good. It is strictly forbidden to pull the branches of tomatoes with too strong knots or pull the trunk to the support. It is desirable, with respect to the growth of the bush, simply dressing to a higher level.

If you correctly carry out the garter, you can get a number of advantages:

1. Well-tied tomato bushes, allows you to feed and water without getting the solution on the foliage, which the culture categorically does not tolerate.
2. Tomatoes that hang rather than lie on the ground or other branches are virtually immune to the problem of late blight and slugs.
3. It is much easier to collect fruits from tied bushes.
4. Heavy branches will not be damaged even with too much fruit on them.
5. The plant will not be deficient in incoming oxygen and light.

In a polycarbonate greenhouse, tying is not difficult, and for this you can use a support or special garter material. As for the canvas, cotton fabric, nylon tights, cut stockings are suitable. After the season is over, do not throw away the garter material, because if it is washed, it will fit on next year, which will eliminate the problem with its preparation and significantly reduce the time.

It is better not to use such material options for garters as thread, fishing line, thin twine, wire. Thin and too hard material can cause damage and, accordingly, break the branch.

High-quality garter of tomatoes in a polycarbonate greenhouse

There are a variety of ways to tie tomatoes in a polycarbonate greenhouse, but the most popular are tying each bush to an individual support, mounting on a wire frame, linear tying, trellis tying, vertical trellis.

Most often they are tied up on an individual support, as it is suitable for a greenhouse and made of polycarbonate and ordinary film.

A support for attaching bushes can be used in the form of:

• wooden stakes;
• plastic or metal pipes;
• Thick rods.

The support is installed near each bush, and in height it should be selected in accordance with the height of an adult bush. The stem is wrapped with a strip of fabric and fixed on a support. The method is perfect for both undersized and medium-sized tomato bushes. For tall ones, it is not advisable to use it, since the support may fall along with the bush.

Ways to tie tall tomatoes in a greenhouse

What to use for tying tomatoes in a greenhouse

In order for tomatoes to fully justify all the work invested in them, you will need a choice of seeds, competent planting, proper care, careful and neat look of the garter. As a rule, which option for tying the crop will be used depends on personal preferences, the availability of certain types of materials, the plant variety that affects fruiting, ripening rate and even the growth of the bush, the dimensions and capabilities of the greenhouse, how the cultivation will be carried out, for example year-round or seasonally. You need to choose methods that are as safe as possible and very effective.

Tomato garter in a polycarbonate greenhouse (video)

It is quite possible to install such a fastening of the bushes, which will allow you to use the structure every year without disassembling it. The main thing is to follow the recommendations and properly install the structure so that it does not fall and lead to breakage of the bushes and damage to the crop.

Examples: how to tie up tomatoes in a greenhouse (photo)

For growing in greenhouse conditions, tall varieties of tomatoes are suitable, which are characterized by high yields. In order for the branches of plants not to break off under the weight of the fruits, they should be tied up. Every summer resident knows the technology of tying tomatoes in a greenhouse. There are several proven ways to attach the branches and stems of seedlings. The article tells how best to tie tomatoes in . Based on these methods, each gardener will choose the best tying option.

Binding: why is it necessary

Tying up tomatoes is a simple procedure and involves attaching the branches of a plant to supports using fabric or ropes. Other materials may also be used. The stems should be tied up immediately after pinching is done and fruit ovaries are formed. After the seedling grows in growth, the procedure is repeated. No need to tie undersized, early ripe varieties tomatoes. It's about about varieties for open ground:

• Amber;
• Northerner;
• Polar.

Such varieties have an average yield and are rarely grown in greenhouse conditions. Because experienced gardeners prefer tall and high-yielding varieties tomatoes. This is justified by the fact that in a small area of ​​\u200b\u200bthe site you can grow big harvest. These varieties include:

• Honey saved;
• Mushroom basket;
• Southern tan.

Such varieties have tall liana-shaped trunks. Their average length is about 3-3.5 meters. Big number side stems and their long fruiting period make these varieties very popular. A prerequisite for growing: the need to tie branches to supports.

Not only the stems of plants, but also branches with tomatoes are subject to tying up. In special cases, they should be fixed in two or three places for reliability. It is impossible to tie knots tightly, and also tie close to the trellis. If this is necessary, then the mount should be removed and the stem fixed in another place.

A competent garter will bring great benefits to plants. Benefits of the right harness:

• The fruits of plants do not like high humidity. If moisture gets on the foliage or stems, it can cause rot. If the plants grow vertically, and watering is carried out under the root, then this will avoid rotting;
• Tomatoes that hang are more convenient to collect, and they will also be protected from damage by photofluorosis, slugs;
• Branches do not break under the weight of fruits;
• Tying the branches will allow the fruits to receive more air, light, which in turn will speed up the ripening process;
• The technology of tying the stems simplifies the care of tomatoes, namely weeding, fertilizing, pinching.

Watch the video! 5 ways to garter a tomato

What to use for fastening

It is necessary to firmly tie up the shrubs with the help of garter material and trellises. After the crop is harvested, you can leave the fixtures on next year. Garter material must be washed and disinfected.

Important! Do not use thin twine, fishing line, wire and other hard materials that can damage the stems of plants.

It is recommended to use special tools based on adhesive tape and a cutter that resembles garden pruner. Thanks to this device, you can accurately and effectively fix the stems at the required height. The tape is quite easy to remove without damaging the plants. Such a device should be used to tie tall shrubs to props.

One of the most budget methods fasteners - plastic clips that are fastened with one movement of the hand. The clips are strong and can withstand any weight. Can be used multiple times. Clips different size and they are suitable for fixing stems, branches and fruits.

Tying options

There are several ways tying tomatoes in the greenhouse. The choice depends on the height of the shrub, yield, type of greenhouse and variety.

About, how to tie seedlings should be thought out in advance. This will simplify the care of plants, avoid damage to the stems and roots.

Step-by-step tying to an individual support

This method is suitable for small film greenhouses. For supports, metal, plastic pipes, wooden stakes.

Supports must be installed next to each bush. The stakes should be the same height as the plants. The fixing material should be wrapped around the stem and secured to the support. This method is suitable for small tomato bushes. tall tomatoes this support will not last.

Wire frame mount

Best used for tying compact high-yielding varieties of tomatoes. Coarse mesh metal mesh should be wrapped around the shrub in the form of a wide pipe and dug a little into the ground. Such a support is suitable for attaching not only stems, but also branches with fruits.

If necessary, such a structure can be moved to another location. The disadvantage of this method is that it is difficult to harvest.

Line Mount

A simple method that is suitable for growing a large number of shrubs. With it, you can quickly tie up shrubs. Such a device should be mounted immediately after the greenhouse is built.

On both sides of the beds you need to drive metal pipes to which the rope is attached. Bushes must be tied to a rope at the same distance from each other. The only disadvantage of the method is that it is not suitable for plants with heavy fruits.

Tapestry fastening

This fastening is used for greenhouses made of polycarbonate, and is also suitable for tall, high-yielding varieties of tomatoes. Metal poles are installed along the edges of the greenhouse, between which ropes are stretched every 30 centimeters. It should be a strong mesh. Plant bushes must be fastened with plastic clips.

Spreading plants with fruit branches can be attached to such trellises. For convenience, you can also use ready-made trellises made of plastic or wooden slats. The structure must be firmly fixed.

vertical trellis

Convenient mounting option for year-round greenhouses. Ideal for tall shrubs. Next to each bush should be fixed rope, which is attached to the roof of the greenhouse. This method will allow you to withstand a large weight of the fruit. To prevent damage to the branches, a wide or soft rope should be used.

Mesh mount

Instead of a rope between the posts, you can stretch a metal or plastic mesh. The network must have large cells. Next, you should fix the stems or branches of the bushes. In the process of plant growth, branches can be untied and fixed in a new place.

In order to choose desired option tying, you should try several methods. Stable structures can cost more, but will last for several years.

Not only, but also other tall plants can be attached to such structures.

The article discusses the reasons for the need to tie tomatoes in a greenhouse. Various ways tomato garters in photos and videos, what materials can be used and which ones should not. The opinion of gardeners about the procedure.

Many summer residents, having plots near the house, grew early harvests of vegetables on their own. Our grandparents not so long ago planted vegetables in glass greenhouses. Thanks to the development of science, glass was gradually replaced by polycarbonate: a durable, lightweight material that perfectly retains heat and evenly transmits light streams inside the structure.

Although the polycarbonate walls are quite thin, only 4 mm, they have increased strength: the structure will withstand both hail and heavy rain, strong physical impact, as well as other misfortunes.

For the first time, carbonate was mentioned by scientists in the 19th century. German inventor Alfred Einhorn discovered it by accident while trying to make a painkiller from ether. After some time, German and American scientists received polycarbonate.

In the 70s of the last century, cellular (or cellular) carbonate was obtained as sheet material. During these times in Israel, where in hot conditions actively developed Agriculture and animal husbandry, became interested in the new discovery.

Glass was expensive and fragile, acrylic did not hold desired temperature, and polycarbonate was ideal for solving the problem.

Why tie up tomato bushes

The nightshade family requires increased attention. If you forget about them for a week, the bushes will change their appearance very much:

• They will grow, they will release stepchildren.
• Heavy branches will fall to the ground or even break from a heavy load.
• The worst can happen: the tomatoes will get sick, wither and drop the fruits.

Something else important: the plant does not like moisture on the leaves and can die from water. If the bush is raised up, then it becomes convenient to water the plant without harm to it: right under the spine.

In this position, the stepchildren (additional outgrowths that need to be removed) are clearly visible, it is convenient and pleasant to harvest a ripened crop.

Tied Bush:

• takes up much less space
• well lit by the sun
• it is easy to handle
• air between the branches circulates evenly,
• does not come into contact with the soil, which protects it from diseases,
• well protected from slugs.

Exists big variety varieties, in addition, tomato bushes are different heights.

undersized tomatoes, strong and small, grow well without support. tall tomatoes reach 1-2 and even 6 meters in height and, of course, need support. The high stem of the tomato, despite the powerful root system, will not withstand the weight of the fruit.

And if you planted tall varieties to be good harvest, tying is important and must be carried out!

Some vegetable growers open field get a crop from tall varieties of tomatoes without tying them up. This requires a lot of free space. You need to plant the bushes away from each other, their stems will spread along the ground, and even put out additional roots.

Materials for tying

• Wooden bars or metal rods,
• twine (twine), long strips of cotton fabric,
• garter tool (tapener).

For these purposes, you can tear into strips of 5-6 cm an old sheet or nylon tights that are out of use. Nylon tights as a garter material are soft, elastic, durable.

If the garters are preserved from last year, they can be reused after sanitization.

Boiling and disinfecting will protect the bushes from disease.

The main stem is tied with a soft strip of fabric or pieces of tights, twigs can be ordinary twine, folded in half or three.

A special tool, a taper, will help you perform the operation super-fast and without knots. Weighs little, they are easy to work with.

This device is specially designed for tying climbing and creeping plants: grapes, tomatoes, cucumbers, raspberry bushes, currants, roses. It fixes the bush with an elastic band, fixes it with a metal bracket. In the photo below you can see an example of his work:

How to tie up tomatoes in a greenhouse, steps

1. pasynkovanie,
2. preparation of equipment and materials,
3. garter in the chosen way,
4. watering.

It is interesting to know that the plants in the greenhouse and in the garden, if they are the same varieties, are tied up in the same way. The only difference is that the greenhouse, where more than favorable conditions, they grow faster and will give best harvest.

Possible mistakes

For garter tomatoes, preference should be given natural materials, despite only lasting one season. Synthetic materials adversely affect vegetation.

It is important to know what not to use thin materials: rope or fishing line! They hinder progress nutrients, will crush the stems and simply destroy the entire future crop.

Tying methods

Simplest - with wooden pegs up to 1 meter high. Attached to it top part stem. As the bush grows, the tying is repeated.

The remaining methods are performed without stakes.

Linear (horizontal)

On the edges of the beds are installed strong wooden blocks. Stretch a wire between them, fix the bushes to it with a rope.

This method is good because re-gartering is not required: the plant will catch on the wire, wrap around it securely and be securely attached.

Wire frame in the form of a prism or cone

This method is suitable for fixing medium-sized or undersized varieties. Can be costly if planted a large number of tomatoes.

More time-consuming - trellis

A trellis is a special vertical support for growing vegetables in a greenhouse. The principle of operation is as follows: the plants are fixed to the ceiling, and during growth they are pulled up. This is very convenient if the area is small, or it is a greenhouse.

Today there is a wide variety of its designs: from wood, metal, plastic in the form of a grid, and other improvised materials. In specialized stores it is easy to buy ready-made for every taste.

You can do it yourself. From various improvised materials: even from hockey sticks. The method allows you to leave stepchildren.

Tie up or tie up?

Tomato garter on hooks and chains:

Greenhouse - quite expensive building. Why not grow different vegetables in it. Let's take a closer look at how to do it right.

Tomatoes come from South America, where the climate is mild with abundant, but not frequent rains. They bear fruit at a temperature of 20-25 gr, do not like heat.

Cucumber once grew in the wild in India, where it is hot and humid, he, on the contrary, loves frequent watering at high temperature (above 25).

Tomatoes need frequent ventilation, cucumbers do not. In addition, they have different soil moisture requirements. How to be?

You can grow tomatoes with cucumbers in one greenhouse, only they need to be divided into three parts:

• northern cool - plant cucumbers,
• central - the most ventilated, under the windows, select tomatoes,
• southern, sunny and hot to offer sweet peppers.

It should be noted the fact that one culture in the greenhouse feels better, it can be created ideal conditions, and in the case of a compromise, everyone loses a little.

​Related Articles​

Agronomists who grow tomatoes in whole plantations and export them buy special garters. This device is somewhat similar to a stapler and allows you to wrap around the stem and support with a special tape that meets all the requirements for it. Such devices are also used by those involved in the cultivation of grapes.​
It takes a lot of time and effort to make ladders and rings, but made once they last for many years and during their operation the time required to care for plants is greatly reduced. In addition, when fastening the lashes of cucumbers with rings to the ladders, the plants are not damaged and the rings do not interfere with their growth and development. The yield of cucumbers increases when using ladders.

Why do tomatoes need to be tied up

As the plants grow, about once or twice a week, their stem (top) is wrapped (wrapped) around the twine clockwise, on average, one revolution per internode.

If the greenhouse structure itself is strong, then it is more rational to use it for tying tomatoes.

Thus, growing tomatoes in winter will not be special work if you approach this task in advance with all responsibility and warmth.​
You can also tie up tomatoes using frame trellises. Several rows of wire or twine are pulled between stakes at a distance of 35-40 cm from each other. Stems are attached to the twine.
You should not rush between mineral and organic fertilizers. Both need to be used. The main thing is that they contain important elements for growing tomatoes: potassium, nitrogen and phosphorus.​

• 
  Tie up plants that produce red juicy fruits, can be done in several ways. In this case, it is necessary to be guided by the power and height of the stem, as well as the variety of tomatoes.

Did you like the material?

• When growing tomatoes, another method of tying them is used. To do this, as in the first case, a strong cable is pulled over each row of tomatoes, and wire hooks are also prepared from thick steel wire and rubber rings from an old bicycle tube are cut.

You can use nylon clamps instead of fabric strips different size. They are freely sold in stores.​

Ways to tie a tomato

All gardeners need to be able to tie up tomatoes in a greenhouse. This is an indispensable condition for growing tomatoes and getting a good harvest.​

How to tie up

The essence of easy way garters of tomatoes consists in the manufacture of support stakes. Their role can be ordinary metal rods or wooden sticks. The distance between the stakes should correspond to the distance between the seedlings, but the rods themselves must be stuck into the ground about 5-10 cm from the shoots. The depth of planting the stake in the ground is 20-30 cm. The height of the stick itself will depend on the tallness of the tomato varieties that will need to be tied up.
Properly selected fertilizers will help to avoid all sorts of diseases of this crop, which include: twisting of plants, dying off of shoots, yellow-brown spots on leaves, and the like.

Stems and branches of tomatoes, as they grow, are tucked into the wire from one side or the other, according to the principle of braiding. Heavy brushes are tied to it or hung on hooks.

If you are growing tomatoes for sale and you have a lot of them, you can get a special device - a garter that acts like a stapler, wrapping a special tape around the stem of the plant and the support. It is very popular with those who grow grapes. As you know, tomatoes do not like water on the leaves and ovaries, they should be watered under the root. It is almost impossible to do this when the plants are lying down. Growing each garden crop has its own subtleties. Just sowing the seeds in the ground and waiting for the fruits to appear is not enough, you have to make a lot of effort to get a good result.
Three main ways:

Pieces of strong synthetic twine, fishing line or aluminum (copper) wire are tied to the cable above each plant with loops made in advance every 20-25 cm. Wire hooks are inserted into these loops, the rubber ring is brought under the stem of a plant or a bunch of tomatoes, the ring is folded in half and hooked on the hook. As the plants grow, they make it an additional attachment to the next twine loop.

If you wish, you can put tomatoes under the roof of the greenhouse, tilting the tops and directing them along the greenhouse. But for this it is necessary to foresee such a possibility in advance and take the necessary measures. Namely, when planting tomato seedlings, alternate tall varieties with short ones. This will make it possible to create additional free space at the top.​

There are several of them, and the choice of one of them depends both on the variety of culture and on the preferences of the hostess. Tomatoes tie up:

You can increase the yield of tomatoes many times over if you learn how to tie them up correctly, and this is not so difficult to do.

How to tie

It’s good if the greenhouse as part of its soil will have additional elements: magnesium, boron, copper, manganese and sulfur, as they have a beneficial effect on good growth tomatoes under adverse environmental conditions.
The advantage of the trellis method is that plants do not have to leave only one central stem; several stepchildren can be allowed to develop in order to increase the yield. This is quite possible in heated greenhouses, where tomatoes can continue to grow after the onset of cool weather.

• 
  As you can see, without a garter, you can generally lose your crop, no matter how strong the root system is. Yes, and the gardeners themselves will be much more convenient to take care of the plants, and subsequently remove the ripened fruits from them.

And tomatoes are one of the most demanding crops to care for, requiring the implementation of many activities aimed not only at obtaining a crop, but also at preserving it. One of them is a tomato garter in a greenhouse.

Easiest to use

found a mistake in the text
​To attach the stem to the loop of twine, a short piece of twine can be used instead of a wire hook and elastic band. In this case, the stalk of the tomato is tied to a loop of twine, as to wooden stakes, using short pieces of twine. When using this method, the lower end of the looped twine can be tied to a small peg driven into the soil next to the stem of the plant.​

• ​For more comfortable work, it would be a good idea to buy a special tool for quick and convenient operation. It is called a garter.
  to wooden stakes;

It is important that the roots and shoots of the plant do not burn out, so the greenhouse where the growth and garter of tomatoes will take place must be equipped with vents or special holes. Timely ventilation will avoid many problems when growing this crop (for example, watery fruits).

Planting seedlings occurs after the age of the seedlings reaches 50 days.
Another type of trellis garter is linear. In this case, the wire is pulled between the stakes only along the top, and a rope is tied to it above each plant.

• ​Yes different ways garters of tomatoes in the greenhouse. Their choice depends on the power and height inherent in the cultivated tomato variety.
  There is no difference between how to tie up tomatoes in a polycarbonate greenhouse or in the open field. Both the materials for the garter and the technology itself are no different.​

We note right away: not all varieties of tomatoes need a garter. Early maturing and stunted tomatoes they may well do without support, but in greenhouses it is usually tall and abundantly fruiting varieties that are grown - this is much more profitable, as it allows you to collect a bountiful harvest from a small area of ​​protected ground.

individual pegs

Conclusion

​please let us know: highlight it and click:​

parnik-teplitsa.ru

How to grow tomatoes in winter?

​When used instead of twine with loops of aluminum or copper wire with hinges, steel hooks are not required. In this case, the stem of the plant can be attached with a rubber ring directly to the loop made on the wire.​

In greenhouses, as a rule, tall varieties of tomatoes are grown, as they are more productive. This is beneficial for limited greenhouse space. That is why it is so important to carry out the correct and timely garter of tall varieties of tomatoes.

to a wire stretched at the top of the greenhouse or a rail nailed to the racks;

Tomato flower should be pollinated artificial way.​

It is better to plant tomato seedlings in a greenhouse when it reaches the age of 50 days. The distance between plants should be approximately 60 cm. If the distance between seedlings is less, then in the process of growth, the tomato bush will be limited in additional space for branching.

Its lower end is attached to the stem. And that's it. You don’t have to think about how to tie tomatoes in a greenhouse - they will need to be wrapped around the rope as they grow. Watch the video in the article, read the recommendations below and choose the one that suits you best.​

All that is needed is long stakes or metal rods, wire or strong twine, as well as the “dressing” material itself, which will come into direct contact with the plants. It must be strong and wide enough.​

Planting seedlings in a greenhouse!

For reference. Not all gardeners believe that tying tomatoes in a greenhouse is necessary, explaining their position by the fact that nature itself knows how best, and that a plant that is not tied up takes root and develops better.

for each stem. Surely every summer resident will find some trimmings of fittings, remnants of plastic pipes, metal rods, etc. It is possible, without further ado, to cut wood rails. The correct garter provides for the deepening of the stakes 25-30 cm into the ground and they should rise the same distance above each stem. After that, you can start wrapping the stem of the plant with a garter. The ends must be crossed with a figure eight or twisted, and then fixed on a support. Additionally, you can support heavy brushes. This method is recommended to be used for garters not of all varieties, but only of medium height, moreover, such actions will have to be repeated more than once throughout the season;

Ctrl+Enter

When growing tomatoes, you can tie them to stakes. Stakes are slats 1.2-1.5 m long with a section of 20x20 or 20x25 mm, pointed at the bottom. To increase the service life of the rails, it is recommended to cover with drying oil and paint with oil paint. Tomato stalks are tied to stakes with a figure eight, strong waterproof twine or other materials, as described above. Tall and medium-sized varieties of tomatoes are tied up in two or three places as the plant grows.

When growing vegetables in protected ground facilities, it is necessary to use various devices and devices that facilitate the care of plants and allow you to get high yields per unit area of ​​the structure. The main vegetable crops grown in the greenhouse are cucumbers and tomatoes. These plants in the greenhouse are usually tied up.

Garter tomatoes will increase productivity!

To the peg and wire (rail).

The greenhouse itself is a kind of closed ecosystem that does not imply the presence of bees. That is why greenhouse tomatoes should be artificially pollinated. This is usually done during the day: we pass between the rows of plants and gently shake the flower brushes. After that, it is advisable to sprinkle water on the flowers themselves (you can use a spray bottle) and water the soil.

5-6 days before planting seedlings in a greenhouse, it must be sprayed with boron solution (1 g boric acid per 1 liter of water). This nuance will allow you to save flower buds even at the first ovary. Therefore, in the near future, the yield will be at its best.​

1. The easiest and most affordable is to use individual stakes for each plant. These can be trimmings of reinforcement, and a metal bar, and a wooden lath, and thin plastic pipe- what is at hand.
2. Wire, fishing line, harsh thread, thin twine - all this is not suitable for a garter, as it will crash into the stem as it grows, pull it, and you will destroy the plant with your own hands.
3. However, growing tomatoes in a greenhouse in our climate is not in itself natural for them. And artificially created conditions dictate their own rules of care.

Tapestry method

Airing

Pollination of tomato flowers

When tied to stakes, plants are blown out worse and shaded with stakes, however, due to the convenience and simplicity, tying to stakes is used by many vegetable growers.

There are several basic ways to tie plants.

The greenhouse itself can play a significant role in choosing the method of garter. Or rather, its framework. It is very often used as a place for tying transverse twines, eliminating the need to install top rails and stretch the wire.

It should be noted that the water temperature for irrigation should not be lower than 20 degrees, as cold water causes inhibition in the development of plants.

Prevention of late blight

Seeds can be sown immediately in the soil of the greenhouse, but they must first be prepared. Seeds before sowing are first calibrated, then pickled for half an hour in a 1% solution of potassium permanganate. They should be planted in the greenhouse soil at 4 g per 1 sq.m. Before germination, it is important to ensure that the temperature during the day is maintained at 20-25 degrees, and at night - 16-18 degrees.

Each of the described methods is quite popular and has its adherents.

1. The length of the stakes should be 25-30 cm higher than the height of the plants - it is to this depth that they are driven into the ground a few centimeters from the bush.
2. Here are the main reasons that speak in favor of the garter. And every summer resident has the right to decide for himself whether it is worth doing.

considered more complex, but also more reliable. To do this, you will need tapestries - long stakes that must be driven into the ground at some distance from each other. Between them in a horizontal plane, it is necessary to stretch a cable or cord, maintaining a step of 35–40 cm. As the plant grows, the stems and branches must be tucked into a stretched thread from one side or the other, guided by the principle of braiding. brushes with a large number fruits can be additionally tied up or hung on hooks. This method is good because it allows you to do without pinching and ensure the growth of branches to increase the number of fruits. This is quite possible to achieve in a heated greenhouse, where the growth of the plant will continue after the onset of cold weather;

ParnikiTeplicy.com

The arrival of spring marks the beginning of the summer season, and amateur gardeners rush to their plots to grow a good and rich harvest. However, not everyone gets it like that, because growing cultivated plants This is a huge job that requires certain knowledge and skills. So tomatoes need to carry out certain activities, which are aimed not only at getting a crop, but also in order to save it.

Garter methods

​Can also be used combined method garters, in which the lower part of the stem is tied to a stake, and the upper part is attached with twine to a thick wire (trellis).

• ​When growing on trellises, a strong steel wire (cable) or insulated wire is pulled along each row with plants at the top of the greenhouse. copper wire- make tapestries.
• This operation is carried out throughout the summer as needed. How to tie up tomatoes in a greenhouse? The first garter is done during the planting of seedlings in the greenhouse or when it reaches a height of 40–50 cm (if small seedlings were planted). To do this, hammer the pegs desired length and tie to them. As garters, it will be correct to use strips of soft tissue(gauze, bandage) 3–5 cm wide. When the tomatoes grow, the procedure is repeated. And so several times over the summer.
• After a while (after about 1.5-2 hours), the air humidity should be reduced by ventilating the greenhouse. Thus, you will prevent waterlogging of the soil, and the fruits will be tasty and sweet.

Thus, when planting tomato seedlings, it is important to do everything right in advance. This forethought is necessary so that the tomato bush branches well and nothing prevents its timely ripening.

When to tie tomatoes

Perhaps the instructions given in this article did not reveal anything new for experienced gardeners. But if it turned out to be useful to novice summer residents and helped them decide on their own cultivation of the most beloved vegetable crop in our country, we will assume that it was not written in vain.

Tying tomatoes to wooden stakes

After that, the stem of the plant is freely wrapped with garter materials, its ends are crossed by a figure eight or twisted and tied to a support. The same is done with heavy brushes so that they do not break off under the weight of the fruit.

tie for trellis

Tying to a wire or rail

The most effective way to tie tomatoes

Tapestry garter can be performed and

Every gardener knows that this plant, which produces juicy red fruits, must be tied up. On the open ground early and undersized varieties they may well grow without support, but it is tall plants that bring a bountiful harvest that are chosen for growing in greenhouses. As a result, under its weight, a thin stem can simply break. Some summer residents are of the opinion that the plant should take root and develop in its natural conditions, without human intervention. But the creation of greenhouses is already such an intervention, which means that this process must be managed from the very beginning to the end.​

When growing cucumbers on wire trellises, instead of twine, wooden ladders are also used to tie plants. For the manufacture of ladders used wooden slats section 15x15 or 20x15 mm. The length of the rails should be 10-15 cm longer than the distance from the wire to the surface of the bed. Holes with a diameter of 2-3 mm are drilled along the entire length of the rails every 10-15 cm, so that ordinary matches enter them with little effort. Burnt or removed gray matches are inserted into the holes obtained. To increase the life of the ladder, it is advisable to paint it with oil paint.​

The ends of the wire are best tied to steel U-shaped studs driven into the wooden frame elements. Studs are pieces of steel wire bent in the form of staples and pointed at both ends or nails with a hat previously bitten off or chopped off with a chisel.

It is necessary to securely hammer strong stakes into the ground for each tomato. Tie the plants to them so that the bush stands straight and is stable. The length of the stakes must match the grade. If the bush is already large, then make several strappings. In the middle, you need to tie the stem itself with a stake (use a strip of cloth), above, clasping the entire bush, tie back to wooden support. Since the consumption of strapping material will be large, it is better to use ordinary twine in several threads.

Late blight is the most common disease among greenhouse tomatoes, therefore, once every two weeks, its prevention should be carried out.

When growing vegetables in protected ground, devices are usually used that make it easier to care for plants, while allowing you to get high yields. So how to tie up tomatoes in a greenhouse?

How to grow tomatoes in winter? This topic is becoming more and more relevant these days. It's so nice to feel the taste of summer when there's a blizzard and a blizzard outside! Despite the fact that many varieties of tomatoes are imported from hot countries, nothing can replace the taste of "homemade" vegetables that you have grown yourself!​

TeplizaNaDache.ru

How to tie cucumbers and tomatoes in a greenhouse - All about Seedlings and Greenhouses

Pay attention. This method is suitable for medium-sized varieties, since the support may not withstand heavy weight and fall along with the plant.

It is best to use a fabric torn into strips 3-4 centimeters wide.

1st way to tie cucumbers and tomatoes

To prevent the growth of tomatoes, stepchildren should be removed from them (see Tomato stepping, why is this necessary?). On these processes, ovaries and fruits are also formed, but they rarely have time to ripen, taking a lot of strength from the plant.

in a linear way

Tying up tomatoes is also necessary for their convenient pinching. Numerous stepchildren contribute to the growth of the plant, but the fruits in these places will not have time to ripen, but they will draw a significant concentration of nutrients onto themselves, which will not fail to affect the quality and quantity of the crop. That's why tomatoes need to be pinched, but it's more convenient to do this when they are tied up, and not spread along the ground. In addition, fruits lying on the ground can be attacked by slugs and other pests. Late blight is no less dangerous - a disease caused by a pathogen whose habitat is the soil.

Such ladders will require one or two for each plant.

For tying plants, it is necessary to use strong twine, ribbon, cord and other materials that can withstand a significant load throughout the season. These materials must be wide enough, as thin materials can cut through the plant stem. A good material for tying plants is an old used tape from a reel to reel tape recorder. It does not get wet, does not rot, is durable, withstands heavy mechanical loads, is easy to clean and disinfect.​

This device is not very convenient for a greenhouse, as it will impede free access, but still some gardeners use this method and tie tomatoes to it, which in itself is very convenient. But we must remember - the greenhouse space is very limited. It is better to use another way.

Of course, there are ready-made special preparations for processing tomatoes from late blight (ordan, zircon, nitralin, etc.), but it is quite possible to get by with improvised methods. Here are some of them:​

The right garter is one of key points care. For tying tomatoes, it is important to use a strong cord, good-quality ribbon, twine or other materials that can withstand heavy loads. An important point is the thickness of the rope itself, since thin materials can easily injure the stem or cut it.

2nd way to tie tomatoes

To get mature and delicious tomatoes, first of all, it is worth thinking about a properly made greenhouse.

The disadvantage of this method is that you will have to repeat the described procedure several times during the season, moving the rope higher or new.

It can be old sheets or linen.

Stepson tomatoes are more convenient when they are tied up, and not lying on the ground.

garter of tomatoes to stakes

. All you have to do is drive in the stakes and pull just one row of wire over the top. Attach a few long ropes, the ends of which must be fixed on opposite stems. As it grows, it remains only to wrap the stem around the rope.

Tying tomatoes is also necessary because the plants should be watered under the root, avoiding moisture on the leaves and fruits. It is clear that this is almost impossible to achieve if the tomatoes creep along the ground. If you do not comply with this condition, you can be left without a crop, and in this case even a strong root system will not save. In addition, it is much more convenient for the owner of the site to take care of the tied plant, because there is no need to bend down or work on your knees.

​Split rings with a diameter of about 30 mm are required to use ladders. Rings are made of soft, for example aluminum, wire with a diameter of 2-3 mm. Such rings are needed for 5-7 pieces for each plant.

Garter cucumbers to a wooden ladder

The twine is tied to the bottom of the plants under the bottom leaf with a loose loop so as not to interfere with the growth and thickening of the stem, and then the twine is wrapped around the plant around the stem.

These methods are used most often, as they are reliable and do not limit the space of the greenhouse. A strong cord is tied to a wire tightly stretched at the top or a nailed rail and lowered to a tomato bush. The bush is tied to this cord (it will be the main one). As the culture grows, it should be tied up again. To do this, wrap the entire bush around with a cord (twine) in several threads), then wrap it around the main cord, pull it up so that the bush becomes more compact, and tie a knot.

Mix 250 g of salt and 10 liters of water, add 10 drops of iodine. With the resulting solution, we spray the leaves.

The garter allows plants to avoid attack by pests, as well as withstand the weight of their weight, reaching a certain height.

Tomatoes are thermophilic culture. Optimum temperature for their growth and development fluctuates between twenty and twenty-five degrees. Therefore, if you want to enjoy the taste of fresh tomatoes even cold winter, first of all, you should think about how to make a greenhouse correctly.

Some people prefer nylon stockings and tights - they do not rot in one season and can be used repeatedly.

Tall plants are not able to support the weight of the fruit and may break. See also: Planting and growing gladioli - the rules for caring for beautiful flowers See also: Diseases of cucumbers. Their types and treatment. Pests Manufactured ladders and rings are used as follows. Before planting seedlings, as usual, thick wiring is pulled along each row of plants - trellises are made. Insufficient loop size in the lower part of the plant can lead to constriction when the stem thickens, making it difficult for nutrients to reach roots and water to leaves and fruits, which eventually causes the death of the plant. As the plant grows and thickens, the tight knot needs to be loosened. It can be called combined. The difference from the previous one is that the cord is tied not to the bush itself, but to the stake. Then it is pulled tight and tied at the top. The advantage of this method is obvious, it is more reliable and durable, there is no danger that the whole tomato will break out by negligence with the root. On this basis, the tied plant will be very stable. Garters can be made to the very top without fear of injuring the plant itself.

rassadnik.com

We take 1 liter of skimmed milk, mix with 10 liters of water and add 10 drops of iodine.

Why you need to tie tomatoes

Tomatoes are tied using linear trellises.

The greenhouse should be well lit, since in the winter months the daylight hours are too short, and the lack of light can adversely affect the growth and ripening of fruits.

A more complex, but also more reliable method involves the use of trellises. How to tie tomatoes in a greenhouse to trellises can be seen from the diagram below.

​Attention! For use in the next season, the garter material must be disinfected by scalding it with boiling water or washing it with laundry soap in order to destroy the pathogens of various diseases that affect tomatoes.

How to tie tomatoes

Tying up tomatoes in a greenhouse is also necessary to preserve the fruit. Lying on the ground, they are attacked by slugs and other pests.

You need to act very carefully so as not to break the fragile shoot. Tomato garter pegs must be inserted into the ground at the time of grafting or immediately after. It is not worth waiting for the plant to grow quite tall, otherwise the roots may be damaged. Before driving the pegs into the ground, it is necessary to make holes in it with a diameter of 7 to 15 cm. The depth should be sufficient so that they do not stagger or collapse. As soon as flowering appears, the plant can be fixed with a garter.

It is clear that the material for this is needed so that it does not damage the thin fragile stem, does not contribute to the growth of bacteria and does not rot before the end of the summer season. Harsh thread, thin twine, fishing line and wire should be discarded immediately. by the most the best option is an ordinary cotton fabric from which bed linen is sewn. Having cut it into strips 3–4 cm wide, you can safely go to the greenhouse.

Garter methods

When the fourth or fifth leaf is formed on the cucumbers and they begin to lean towards the ground, ladders are installed near each plant. To do this, one ring is tied above the plant to the trellis with twine or thin soft wire, and the upper end of the ladder rail is inserted into it. The lower end of the ladder is simply placed on the ground next to the plant, and the plant is attached to its lower steps with the help of rings. To do this, the ends of the ring are bred.

The upper end of the twine (it should have an allowance of 15-20 cm) is thrown over the wire and tied with a sliding loop of a figure eight, a bow or a tie knot.

• Do not spare the threads (twine) - the main thing is that the bush itself stands securely and is tied up correctly. We dissolve 50 g of soda ash in 10 liters of water, add 40 g of crushed laundry soap. We spray the leaves. You can tie tomatoes in a greenhouse using linear trellises. Pipes or stakes 2 ma high are placed along the edges of a row with plants. A strong twine or wire is pulled between the pipes, and a rope is tied to it. Each tomato bush has its own rope, around which it will wrap as it grows and matures. The lower end of the rope is carefully tied with a free knot to the stem of the plant. As the bushes grow, you will need to make sure that the stem wraps evenly around the rope.
• If you choose the right fertilizers, you can avoid all kinds of tomato diseases. Long stakes are driven into the ground along the beds at some distance from each other. Between them, a wire or strong twine is stretched horizontally in increments of 35-40 cm.
• In addition, now on sale you can find various reusable plastic devices both for garter and for maintaining individual brushes with fruits. Their price is low, you can buy once and forget about this problem for many years.​ In addition, they are affected by late blight, a disease whose pathogen is found in the soil. First, it is necessary to ensure the fixation of the main stems, and only then, as they grow, wrap the stepchildren with ropes. This process must be monitored and monitored all the time so that the new process is tied up before it starts to touch the ground.

How else to tie up tomatoes in a greenhouse? Many gardeners have appreciated the nylon stockings and tights: they are soft, do not overtighten and do not cut into the stem as they grow, moreover, they differ long term operation and can be used for more than one season. After harvest experienced housewives wash such garters with laundry soap and scald with boiling water for better disinfection. But all these devices are already yesterday. Today on sale you can find special devices for tying and supporting individual branches with plastic fruits. They are inexpensive, and can be used constantly.​

How to tie tomatoes

A ladder rail and a cucumber lash are inserted inside the ring, the divorced ends of the ring are connected and the ring is lowered to the nearest lower step (match) of the ladder. In the future, as the plants grow, the lashes themselves are fixed with their whiskers on the steps of the ladder or are attached to it by the vegetable grower using rings in the same way as described.

When tying plants, do not pull the twine too much, as if the trellis wire vibrates, this can lead to the plants being pulled out of the soil.

www.polzavred.ru

The main stem must be tied with a soft fabric strip, and everything else can be done with a simple twine folded into 2-3 threads.

Planting a tomato in a greenhouse fertilizer Fertilizing tomatoes in a greenhouse Seedlings of tomatoes how to properly plant in a greenhouse