Garden paths made of wood - ideas for durable paths! DIY wooden garden path.

There are many possibilities to organize garden paths. Many of these methods are very simple, and these ideas can be brought to life on your own, without hiring professionals and even spending a very modest amount on materials.

The second most popular material for garden paths after stone is wood in all its shapes and colors. Wood is inferior to stone in terms of reliability, but it creates a feeling of warmth and does not require serious expenses - both monetary and temporary.

Even in a garden decorated in modern style, wooden garden path looks very impressive. We have found for you a wonderful instruction on how to make a garden path from tree cuts with your own hands.

You will need:

• several tree trunks of different diameters
• varnish for waterproofing wood and protection against mechanical damage

Do-it-yourself garden path from saw cuts of a tree - instructions

First of all, you need to cut circles from tree trunks. Here, of course, you can use an ordinary saw, but, perhaps, then the whole process will take you almost a summer. Therefore, it makes sense to use benzo- or circular saw. Remember about safety! In case you have little experience in using this tool, start working in tandem with an experienced craftsman. And do not forget about safety glasses so that flying particles of wood do not injure your eyes.

Garden path made of wood: the first step is to file circles

The number of circles needed depends, of course, on the length and width of your garden path. You need to work with trunks of various diameters in order to be able to close the space that arises between large circles with smaller cuts.

Step two - level the base for the track

The next step is to prepare the foundation for the garden path. Mark the width and path of the future path by loosening the ground with a rake. Do not make the path too straight, winding "paths" look more attractive. As a foundation, you can use sand, gravel or special mixtures sold at a hardware store.

Step three - compact the base for the track

If the base is too dry, moisten it beforehand, then the compaction will be more effective. Otherwise, there is a risk that the wooden circles will eventually grow into the ground. Also, add a weed killer to the water to keep weeds from sprouting between cuts. You can compact the earth simply by trampling it with your feet - effective method without extra costs.

Step four - varnish the wooden saw cuts

Coat the surface of each saw cut with a protective varnish to increase their strength and resistance to the vagaries of the weather. You can start laying saw cuts as soon as the varnish dries.

The last, final step is to lay the cuts on the track

Since all saw cuts have different diameters, their laying can be compared to picking up a puzzle. Lay all the circles next to each other so that they match the intended width of the track. It is important to lay them tightly so that they do not begin to slip over time. For the best fixation, you can even glue the saw cuts together: after applying glue, press them tightly against each other.

That's all the information that needs to be taken into account when building a garden path from saw cuts with your own hands. You can watch the video tutorial below English language) for paving a garden path, as well as a photo of garden paths made of saw cuts and wood.

DIY garden path - video

Wooden saw cuts as an accent

Wooden saw cuts can be used as an accent in combination with gravel. Such a garden path looks even more romantic if delicate flowers grow on its sides.

Buried wooden saw cuts

Another design option for a garden path is to place saw cuts not close to each other, but at a distance. In this case, you should dig saw cuts into the ground so that only their surface is visible. Then they will not move out of their places over time, and your work will delight you with an excellent result for a long time.

Bright wooden garden path

The wooden garden path is good opportunity use wood leftovers instead of throwing them away. The photo above shows how cute a path made of brightly colored pieces of wood laid at random can look like.

Blue wooden planks

With whole wooden planks you can create a bright garden path. The color is, of course, your choice, based on color scheme your garden, terrace or gazebo. The gaps between the boards can be filled with earth, sand, gravel ...

Wood saw cuts and gravel

The color palette of gravel as a material for filling voids between cuts is very rich. In the example in the photo, a natural sand color is selected, matching the color of the saw cuts. There are many possibilities. For example, white gravel in combination with gray, weather-beaten wood will create a very stylish and modern look your garden path.

Wooden garden path from boards of different lengths

A garden path made of wooden boards does not have to be laid perfectly. As you can see from the example in the photo above, boards of different lengths look attractive and more natural than if they were carefully fitted to each other. The stones along the edges of the path are associated with the banks of a mountain river and give the path a sense of wilderness.

Paths give your garden a neat, finished look. In our time, when people are striving for environmentally friendly products and materials, wooden garden paths are more relevant than ever.

Asphalt gets boring in the city and, choosing what material is best for a path in the garden, you want something natural and at the same time unusual. We tried to consider the advantages of the most popular materials.

Design and purpose

First of all, it should be noted that the path must always lead to a certain place. Psychologists say that a path that leads nowhere or runs into a fence can cause internal discomfort. Therefore, initially, you should draw a sketch of the site, on which you indicate the main parameters of the designed zones and apply the exact location of the tracks.

Paths in the garden are like arteries in the body. It is not at all necessary that they all be the same size, plus material for garden paths can be combined depending on the functional load and type. So garden paths made of concrete or paving slabs are more suitable for paths with a large functional load.

Wooden garden paths or plastic garden paths will not be able to support the weight of the car and will quickly become unusable in areas between the house, garage and summer kitchen. But they are the best suited for arranging the territory of the site. The beauty of such trails fits in perfectly with most views. landscape design.

Another important thing is how to make paths in the garden. Square parallel-perpendicular lines correct form now rarely used. Their advantage is only in the simplicity of arrangement.

It is quite inconvenient to overcome right angles with a wheelbarrow, hilling the beds. Plus, the rectangular configuration visually makes the site smaller, so these are used infrequently in landscape design and only in large areas.

The best option are rounded, arched shapes. In some cases, straight lines can be used, but they are laid diagonally. Unlike a square, a diagonal arrangement visually enlarges the territory.

Important: I want to warn against overly winding paths. Intricate labyrinths will subconsciously annoy, there is always a desire to go straight. Therefore, for ease of movement, it is better to make the arc smooth.

Paths laid in summer cottages or on the territory of private estates are conditionally divided into several types.

• The most common can be safely called the paths mounted from rigid block material or from concrete.. This includes garden paths made of stone different kind and configurations paving slabs, brick or concrete screed. Such structures are distinguished by enviable longevity and endurance. But the cost of arranging such roads, as a rule, is quite high.
• In some cases, hosts prefer soft cover, this includes gravel, crushed stone, small pebbles, sand or tree bark. The only advantage of such a coating is the low price and ease of arrangement. But often these options are abandoned over time. Since, due to the fine fraction, the soft underlying material is gradually spread throughout the site.

• Wooden garden paths are now experiencing their rebirth, in our mighty country this material has been used for at least 200 years, but with the advent of asphalt, it was undeservedly forgotten. Relatively little durability, these designs compensate for the exceptional beauty and naturalness.
• Currently, wood is worthy of competition with plastic modules for garden paths.. Plastic can emit any material, including wood, plastic garden paths are easy to install with your own hands and last a long time. The only serious disadvantage is the artificial origin, not every person, escaping from the city, wants to walk on plastic.

The subtleties of the installation of wooden tracks

Before you make a garden path out of wood, you need to decide what kind of structure you want to assemble. The most common material now are wooden logs, laid vertically with the cut up. But sometimes you can find garden paths from boards, the installation instructions are a little simpler here, although first things first.

Ring decking

The flooring made of rings or wooden logs is especially beautiful, because the pattern on each ring is unique and such a coating lasts much longer than ordinary boards. Such material for garden paths is also attracted by the fact that old, fallen trees can be found in the nearest planting, so the price of such a design will be minimal.

Experts recommend using hardwoods for this purpose, oak is best of course, but larch or aspen is not much inferior to it. conifers are considered less strong and, despite the abundance of resin, quickly become unusable.

The height of the ring ranges from 100 to 250 mm. Too thin rings, especially those made from the trunk large diameter, can break down quickly. Since a lot of material is needed, it is better to use a gasoline or electric saw for cutting. It is desirable to remove the bark from the trunk, since it can contain many pests, and it will become an obstacle to the impregnating protective composition.

To save time, we recommend that you immediately start treating the rings with a protective solution. As a rule, drying oil or machine oil is used for this. The substance should be heated to a boil and the workpiece should be immersed in it for a couple of minutes, after which the workpiece should dry.

There is another way to process. Cold drying oil is applied twice to the workpiece. After the tree dries, its lower part, which is in the ground, is dipped in boiling bitumen and dried. Bituminous film will more reliably protect against decay and pests.

Tip: if you want to artificially age the material, then there is a simple folk method. The tree must be covered with copper sulphate.

While the material is drying, you can equip the foundation pit for laying. The depth of excavation varies depending on the height of the rings. Keep in mind that the flooring should rise 2-3 cm above the ground, otherwise it will gradually silt up. The size of the drainage cushion under the posts is made in the region of 100 mm.

When the pit is ready, the bottom should be well tamped and covered with geotextiles; technical polyethylene is also suitable for bedding. If there is clay below, then you can do without bedding, you just need to tamp it well.

In order for the tree to deteriorate less, a drainage layer of 100 mm of sand or gravel is laid and compacted. While you are doing the preparatory work, protective layer dry on the wood and you can start laying.

In order for the laying to be as dense as possible, immediately prepare cuts of different diameters. Natural gaps between the blanks are filled with sand or sawdust. To seal the gaps, the surface of the track must be periodically moistened.

Important: it is desirable to completely exclude direct contact of wood with the ground. Experts recommend equipping borders in order to protect the flooring from the sides and prevent the drainage layer from being washed out.

Whiteboard use

Garden paths from boards are a little easier to mount. The preparation of wood and the pit is carried out in the manner described above. Timber is used as the material itself. rectangular section with dimensions 150x250 mm.

Such blocks are laid directly on the drainage and the cracks are filled with sand. The gap between the blocks must be at least 5 mm so that they do not crack in the winter cold.

Often the owners go the simpler way, using wood from pallets. It is also treated with a protective solution, but the length of the board on the pallet is 1m and it is better to cut it in half. A bar from the same pallets is laid as guides on both sides. The entire structure is installed on a gravel pad and, if possible, waterproofed.

Tip: on this moment industry produces the so-called garden parquet. Of course, it cannot be called 100% natural due to deep impregnation polymer varnishes, but it has a decent appearance and lasts a long time. It fits in the same pattern as the circles.

In the video in this article, you can trace the subtleties of styling.

Conclusion

Wooden garden paths material is capricious and requires permanent care. Such flooring must be processed from above at least once a year. protective compounds. If the instructions were followed in in full, then such material for garden paths will serve for about 10 years.

landscaping household territory includes creating tracks. The markings for unhindered movement around the site can be different - in the form of crooked paths or solid paths designed from tree cuts.

Such paths perform not only a decorative role, but also a functional one. After all, you won’t move around the site, jumping from flower bed to flower bed - it won’t take long to damage the plants, besides, such movement is inconvenient.

From this article you will learn how to create a garden path or path from tree cuts with your own hands - with photos and examples good options for the site.

Advantages and disadvantages

If every detail is thought out in the design of the backyard territory, the work of the owners of the site becomes much easier. For example, when it comes time to harvest: how can you move around the site without breaking nearby crops and plantings if there are no paths?

Do-it-yourself path from saw cuts of a tree. a photo

They can be designed from various materials, but it is important to take into account what raw materials it is made of country house and outbuildings, and take into account the features of the style chosen for landscape design. Guided by these points, you can proceed to the choice of materials.

Consider the main advantages and disadvantages of country paths designed from saw cuts of wood.

Advantages:

• environmental friendliness;
• trees cut down during site clearing, large branches and firewood are affordable material;
• from various types of wood you can make an unusual path. Each tree has its own unique pattern;
• paths from wooden saw cuts are easy to lay, this does not require special tools and specialist services. It is not difficult to cope with the task of laying paths on your own;
• such trails require minimal maintenance;
• after heavy rainfall, water does not accumulate on the paths, and you can go to the garden for harvesting, bypassing the puddles.

Do-it-yourself garden paths made of wood, photo

The disadvantages of such tracks include a short service life. The tree is natural material, it is subject to the process of decay, so after some time the paths will need restoration.

The wood is prone to ignition, and after rains, such paths are very slippery, so you need to move along them with caution. To eliminate this drawback, the surface of the paths should be treated with coarse-grained sandpaper.

Tools and materials for work

Despite the fact that work related to the installation of paths in the backyard is considered a simple matter, it will be difficult to cope with this task alone.

Path from tree cuts, photo

Before starting work, you need to prepare expendable materials. Paths can be created from simple stumps of small height, from dies, logs or end parts of logs.

So, you will need:

• saw cuts of trees;
• level;
• drying oil and brush;
• mallet;
• spatula and bucket;
• sand and gravel;
• water;
• waterproofing material in rolls.

Having prepared everything that is required, you can take on the preparatory stage - prepare the wood, decide what your path will be (determine the optimal shape and size.

Saw cut wood for paths, photo

An important step is the choice of material for the realization of your ideas.

Advice! Do not save and buy hardwood. For example, the service life of pine is about 7 years, oak - about 10, and the most durable hardwoods will last about 20-25 years. But if the desired breed could not be found, you can use the wood that is at your disposal, or the one that suits the price.

As for the cost of saw cuts from wood, which are suitable material to create paths in the country, then birch blanks are the cheapest - about 700 rubles. per 100 sq. m, the highest cost of hardwood saw cuts is about 3,700 rubles.

Naturally, it will be necessary to update some sections in a few years, and maybe even a complete alteration of the track. The need for restoration work arises approximately three years after the laying of the track, but the period again depends on the type of cut you have chosen. But all this is not so scary, because you will already have experience in designing trails, and in the future you will be able to take into account all the nuances and make a more durable path.

What else needs to be taken into account? First of all, the dimensions of all parts separately. The maximum height of a wooden blank can reach 20 cm, but paths from 10 cm saw cuts are not very suitable option, as they will not hold securely in the ground. Even with a slight load, they will go out of line.

Wooden garden paths, photo

It is recommended to choose cuts that are identical in width, and the height must be adjusted by yourself. After completing the work, you just have to remove the bark from each cut. You need to get rid of it, because it does not fit well to the tree and insects quickly appear in it; because of this, wooden blanks and rot.

Important! Inspect each of the cuts: it is important that the workpieces are solid, without damage. If at least one piece is Bad quality, then the probability of violation of the entire structure is high. Regret the labor invested in this business!

Path from wooden saw cuts, photo

Workpiece processing

The processing of wooden blanks with drying oil will help extend the life of the tracks.

There is nothing difficult in this case:

1. Heat the drying oil, and as soon as it starts to boil, remove the container from the stove.
2. All wooden surfaces should be soaked with heated drying oil - so you protect the workpiece from water and insects.
3. Let the saws dry completely by placing them in a place protected from moisture.
4. After that, process the area that will be in the ground with bitumen. This measure will protect the wood from decay. Thanks to this, the paths will last longer. long term. Bitumen treatment is optional, but desirable.

Recommendation: if you want the path to look old, you can achieve this effect by processing wooden blanks with a solution prepared on the basis of blue vitriol. But keep in mind that after processing, the shade of the wood will change somewhat. In this situation, it is easy to achieve the perfect color of all cuts, due to which the path will look more harmonious in the landscape.

All processed workpieces should be dried and then taken to the next stage.

Walkway made of wood. a photo

Create markup

It is best to draw up a diagram on a paper sheet, designate the places where the paths lie, indicating their configuration, length and other parameters. If this seems difficult to you, just do the usual markup. Decide: how many tracks you want to create in the country.

If you are going to make just one path, you should think carefully about everything so that you can easily move around the site without bumping into obstacles in the form of beds. All buildings, including a country house, a shed, a bath, should be at the same distance.

The optimal path width for suburban area is 35 cm: in this case, one person will be able to move freely along it. But if there is enough space, increase this value by 15 cm. A 50 cm wide path will be more spacious and perfect for walking in the garden.

Paths in the country made of wood, photo

Everything is thought out, the route is defined - it's time to start serious actions. To perform the markup, you will need small pegs made of wood. Place them at the beginning of the trail at a distance of 30 cm and at the end. Fix the pegs by driving them into the ground, and then pull a thick thread or rope between them.

If the path is winding, then at each of the turns you need to drive in pegs for easier orientation and fulfillment of your plan.

Foundation preparation

The materials have been prepared, the markings have been made, now you need to prepare a platform for the location of the pegs. One should be identical to the markings and dimensions of the future path.

Take into account:

1. Path parameters - the site should not be more sizes tracks (only when mounting sides of 5-10 cm) or less.
2. The depth of the marking should be equal to the length of the cuts plus 20 cm. This is enough for the path to withstand a certain load without changing the location of the parts.

Using improvised tools, make a trench:

1. Perform waterproofing by laying a waterproofing material along the bottom of the created base (thick cellophane film for creating greenhouse complexes).
2. Film laying is recommended to be done with minimum stock, and pour crushed stone of fine fraction on top of it.
3. Distribute the drainage layer thoroughly and make a sand cushion.
4. Check the surface evenness with a level.

How to equip a garden path from the transverse cuts of the trunk

At the stage of creating country paths from the transverse cuts of the trunk, it is necessary to put bumpers that perform a protective function. But this is not a mandatory measure: proceed from your idea and the material used.

Borders are formed from bricks, small stones, wood bars, firewood, they can also be plastic or iron. Choose the material of your choice, but remember that the fences will be conspicuous. To make the path look harmonious, it is better to use materials of natural origin.

Paths and paths from tree cuts, photo

Having finished with the sides, lay the "sandy" pillow. Due to this material, the height rises slightly. Do the sanding consistently, and moisten it with water to compact.

Read about how you can use it when arranging flower beds and paths in the garden: installation nuances, size selection, recommendations for do-it-yourself installation are described.

Read about how to equip a beautiful perennial discount along the path.

Creating a path from saw cuts

Having completed preparatory work, start on your own milestone. In order to do everything correctly, you should decide: how the installation of wood blanks will take place. There are a lot of options for drawings: by changing the position of the parts, you can create the desired pattern.

Laying options: close or at a slight distance. Gaps can be left or small gravel can be used to fill.

The laying principle itself is very simple and does not need a detailed description: choose one blank, lay it on the prepared base, deepen it, apply a little effort and then tap it well with a rubberized hammer.

After a certain distance, be sure to check: how well you have done the work of laying wooden saw cuts. To do this, use the level, with it you can align all the details. The path should turn out to be perfectly flat - of course, by level, and not by eye.

Care

It’s not enough just to lay wood blanks to make beautiful paths. It is also necessary to provide proper care followed by. In the first year, it is recommended to fill the voids between the wooden blanks. For filling, you can use crushed stone of fine fraction or sand.

A good option is to let nature itself fill the cavities. A year later, grass will turn green between the blanks.

Advice! To prevent the growth of weeds, fill the cavities fertile soil and sow lawn grass. ornamental plants behind a short time fill the voids, and such a path will look even more unusual.

Wood can be left untouched, aged artificially, or stumps can be painted in variegated colors. You will get an original track: such a fun design will surely be appreciated by children.

Care features:

• allocate one day annually to prevent the condition of garden paths - use an iron scraper to clean round timber;
• after cleaning, cover the blanks with drying oil or paint;
• inspect the wooden blanks: if they have cracks, this indicates a rotting process, the damaged parts will have to be replaced.

Video

This video will show you how to make beautiful path in the garden or on the site of log cuts with your own hands:

Garden paths made of wooden blanks are simple and affordable option design summer cottages. Such paths look original, and it is quite possible to create them on your own. Improve yours too household plot with the help of presentable paths from saw cuts of wood.

photo gallery

Below we have made a small selection of photos with options and ideas for garden paths from saw cuts of wood and logs that you can equip with your own hands:

The paths on the site allow you to move freely between zones in any weather, without sinking ankle-deep in mud and without dragging the soil on your soles. They will become an element of landscape design, given not only the practical, but also the visual component. When choosing material for the tracks, they are guided by the general style of the design of the site and their financial capabilities. Wooden paths in the country are always universal - they are combined with lawns, and with flower beds, and with paved terraces, they can really be made independently, they look great without a border, and the cost depends on the chosen variety. Many users of the FORUMHOUSE portal ennoble the landscape with the help of wooden paths.

Do-it-yourself wooden paths

Wood as a material for garden paths is not the most popular category, but it is quite in demand, due to its high decorativeness, relative durability and availability. Although a cubic meter of processed board costs decently, many use construction residues for paths, which significantly reduces the cost. But even if you take new lumber, due to the lack of wet processes during laying and taking into account the peculiarities of the preparation of the base, the tree can be cheaper than other varieties. According to the manufacturing method, there are two types of wooden tracks.

Do-it-yourself wooden walkways

The main canvas rises above the ground level, the frame is laid on the prepared base. The boardwalk is raised above the ground to provide free air access - such ventilation will significantly extend the life of the track and protect it from waterlogging. It turns out a real "wooden sidewalk". This design needs a slight slope - it helps water to roll off the surface of the "sidewalk", even after heavy rainfall the canvas will dry out faster.

The basis for the flooring is a frame of longitudinal logs, on which, by means of fasteners, crossbars from a board or timber are fixed. It is possible to alternate segments of the same length, but different in width segments, it all depends on the idea. To avoid warping, a wide board is attached to three or four self-tapping screws (nails) from each edge, two are enough for a beam, hats are heated in depth to avoid injury to the legs when walking barefoot.

In order to move normally along the flooring, calmly pass by an oncoming one or, if necessary, roll a wheelbarrow, a track width of 80 cm or 1 meter and a board thickness of 25 - 50 mm are sufficient.

If family members have a solid weight, or the path in the garden will be used for transporting weights in a wheelbarrow, an additional, middle log is laid.

How to process a tree on a path

To protect the logs that are in direct contact with the ground, they must be treated with liquid bituminous mastic or similar means. The crossbars, if necessary, pass with a planer, grind with sandpaper, after which they are impregnated with antiseptics, dried and mounted on the frame. Two assembly options are possible - close, without gaps and with equal gaps between the elements. The wrong side of the flooring is also covered with mastic, the front surface is painted or varnished. Pre-treatment of structural elements with a coating before assembly is more effective than in ready-made, it is easier to cover the assembled flooring with bitumen and tinting.

Garden path from boards: how to make a sidewalk at their summer cottage

Although the flooring can be laid on a flat surface without pre-training so that it lasts as long as possible, and during operation it is not necessary to fight with the weed, it makes sense to follow the technology. There are two ways to prepare - for logs or for the entire width of the track, preparation is carried out in several stages:

• The soil layer is removed with a depth of 20 - 30 cm, the bottom is compacted;
• A layer of sand is poured, rammed, spilled, a layer of fine gravel is poured on top, rammed.

If possible, geotextiles are placed between the layers so that the materials do not mix, this increases the drainage capacity of the pillow.

If the device of wooden flooring is planned as temporary, you can do without a pillow, geotextiles, roofing felt, conveyor belt or similar materials are laid under the logs, weeds are treated with herbicides.

How to make wooden garden paths

Among portal users wooden decking enjoy well-deserved popularity.

Andjey FORUMHOUSE Member,
Moscow.

They came to make wooden paths in the country, the remnants were used - bars (larch, substandard) 3 cm thick and 10 to 2 cm wide. In the future, I will paint with some kind of impregnation. The soil was chosen for half a bayonet, a small layer of sand (tamped), geotextiles, and small gravel on it. On crushed stone - logs from the remains of a log and a beam of the 100th, 10 cm high. The logs were covered with mining.

Ilya79 Member of FORUMHOUSE

A board of 25 and 50 mm, transverse solid, covered the planks with an antiseptic with coloring, the width between the lags was by eye so that the boards protruded slightly from the edge (about 10 cm). I decided not to make a span between the crossbars: it is difficult to mow the grass, you scratch the trees.

Julia397 FORUMHOUSE member

We decided that we would have in the country wooden walkway from planks. So far, 21 meters of canvas are in the plans, 4.5 meters were knocked down over the weekend. For the next, we plan to finish knocking down and start polishing and painting in the color of the house.

Path from boards

frog555 Member of FORUMHOUSE

I am also for paths from boards in the country, clean and barefoot nice to walk on the concrete "roads" so do not run around after a bath.

Alternatively, the flooring is made from used pallets from building materials- pallet. For laying in its original form, choose pallets with a narrow span between the elements. Such a device does not have great decorative effect, but requires minimal cost time and effort to work. Not the most beautiful, but as a prefabricated temporary building - best option, proven by dacha practice.

To make such a path more decorative and last longer, pallets are treated with protective compounds and a full-fledged flooring is knocked together from them. More time is spent, but the result is much more attractive, and the cost of the track, both in the first and in the second option, cannot be cheaper.

A counterweight budget option from pallets, laid tracks from decking - special wooden tile modules from terrace board(on the picture). This garden parquet is laid on a flat base and surpasses home-made varieties in external data, those who made it leave only positive comments, but not everyone can master it due to the high cost.

Wooden garden paths

dug in

Wooden elements in such paths in the country are dug into the ground flush with the surface or protrude slightly above the ground, the voids are covered with drainage materials - crushed stone, coarse sand, granite screenings. Boards, saw cuts of logs, stumps, branches go to the paths, thick timber, the dies are cut 10–15 cm long. Since the tree is completely immersed in the ground, it needs enhanced protection from moisture, it is advisable to soak the washers in a solution of an antiseptic or hot drying oil, the lower saw cut is covered with bitumen, the upper one can be varnished or coated with wax. The laying of saw cuts is arbitrary; to increase the decorative effect, small ones are inserted between thick round timber. If a beam is used, imitation is relevant brickwork with ligation of rows.

Unlike flooring, which can be placed directly on the ground, dug-in paths made of saw cuts and timber require careful preparation of the base, as they will be in the ground and exposed to the external environment.

To avoid water stagnation and premature wear, an effective drainage cushion of sand and gravel is made under the saw cuts, at least 10 cm thick.

The bottom of the trench dug according to the marking is rammed, covered with geotextiles, after a layer of sand, compacted and spilled, a layer of rubble and the last layer of sand. The cut is put on the substrate, the alternation of different diameters increases the decorativeness of the track, the chocks are tapped with a rubber mallet, the horizon is controlled building level. The gaps are filled with fine gravel, coarse sand, granite screenings, clay.

The path from the saw cut perfectly fit into the landscape of the site of the forum member NikNikTar.

NikNikTar FORUMHOUSE Member

From the remnants of aspen logs from my construction site and the abandoned freebie behind the fence, I sawed washers 15-20 cm thick, took out the soil and laid it in peace on the geofabric and sand cushion, having previously bathed them in Senezh. I filled the gaps with chopped aspen trunks (there are a lot of them on the shore of the lake) and covered them with sand, and upper layer mashed fine granite chips. Aspen paths fit very organicallyin the area, pleasing to the eye, but slippery after the rain. I would not dare to make them as main ones, but as a design element and for sedate movements between small architectural forms on the site and walks in the garden - that's it.

Cheapness is one of the main advantages wood flooring, however, is far from decisive. Many homeowners prefer wooden paths in the country because of their decorative look, which fits perfectly into, and walking barefoot along such a path is very pleasant - wooden paths in the country house do not heat up as much as stone ones.

From boards and a round cut, you can make the most different combinations floorings, both in a strict modern style, and in a natural forest. Many do not dare to make such experiments, since wood in contact with wet soil is short-lived, however, with the right approach and following the technology, wooden garden paths can last for several decades.

The material is often at your fingertips - these are old logs, and various boards that were left idle, and thick branches obtained after pruning trees. Quite often they lie around and slowly rot in the barn - so why not be of use to them! Preparing the boards for laying is very simple - cut them into pieces of the same length. The same must be done with saw cuts - in order for the path to be durable, saw cuts are made up to 15 cm thick. And then the technology for creating paths in different occasions significantly different!

If you value your time and at the same time want to get a beautiful and high-quality paved path, consider purchasing one like this.

Form for making garden paths

To begin with, the boards need to be treated with antiseptic compounds or a solution of copper sulfate, however, a specialized antiseptic will cope with its task more efficiently.

When the boards are dry, you can proceed with their installation. Under the path, you need to dig a small trench up to 20 cm deep. So that weeds do not grow in the trench in the future, we cover the bottom with geotextiles, and make a 10-centimeter mound of gravel or rubble on top. In the process of filling the trench with stones on the sides and in the center along the pit, install bars - boards will be nailed to them. This design will fit into almost any interior design.

The second option is to lay the boards directly on a bed of gravel, "sinking" them between the stones. In this case, the boards can be arranged as if randomly, which will give the paths a natural look. In any case, try to lay them so that they do not touch the soil - such contact will significantly reduce the life of the wood. The advantage of such tracks is that after some time, failed elements can be completely easily replaced.

Logs should not stand idle - they can be used to make original furniture for summer cottages and textured garden paths. Wooden saw cuts are laid in a dug trench up to 40 cm deep. Geotextiles are covered at the bottom of the trench, and then a pillow of sand is poured, with a layer of 15-20 cm. Prepared saw cuts begin to be laid on top. The preparation of the tree consists in the treatment with antiseptics and bitumen. Bitumen is melted in a metal container and immersed in it with the lower part of the saw cut.

When it dries, you can start laying. From above, treat garden paths from tree cuts with drying oil, preferably several times. Laying can be done in several styles. If the saw cuts are the same size, they can be laid out in a checkerboard pattern or in rows, and the gaps between them can be filled with earth and sown with a lawn. If the saw cuts are of different diameters, they should be laid out in a chaotic manner, and the gaps between individual logs should be filled with saw cuts from small branches.