Fire safety certificate product list. Fire safety certificate and other permits. Assistance in registration

Certification body PozhStandard LLC provides services for obtaining fire certificates. Below are examples of issued certificates. To view information on the certificate you are interested in, simply click on the picture.

Mandatory fire certificate	fire declaration	Voluntary fire certificate	negative decision on the application

Attention! We guarantee 100% authenticity of each permit issued by us!

The objectives of fire certification are:

ensuring the safety of Russian citizens and protecting them from low-quality products;
official confirmation that the goods meet the requirements fire safety;
increasing the competitiveness of Russian products both in the domestic market and in the external one;
control over fire-hazardous and fire-technical goods that can pose a threat to life, health, property of a person, as well as the environment around us.

As a result of fire certification, the following documents are issued:

mandatory fire certificate;
declaration of conformity;
voluntary fire safety certificate;
refusal letter for a fire certificate.

The procedure for conducting research, standards, as well as a list of products subject to fire certification, is defined in the Technical Regulations "On Fire Safety Requirements", which was put into effect by the Federal Law of the Russian Federation No. 123 on July 22, 2008.

Based on this normative act such control is provided for the following products:

building materials for internal and external works;
means used to protect against fire;
technical devices that generate heat;
solids, liquids and gases;
wires and cables, etc.

Fire certification is provided for products manufactured in Russia and for goods imported from other countries. Carrying out a certification procedure for products specified in the technical regulations is an indispensable condition for their production and sale. Besides, fire certification is carried out in advance before issuing a certificate of product quality in the State Standard.

Fire safety certificate and other permits. Assistance in registration

PozhStandart LLC issues fire safety certificates for products various categories at an acceptable cost. The procedure for issuing permits complies with the requirements established legislative framework Russia.

The fire safety certificate and other documents issued by our organization have full legal force, since FireStandard LLC is accredited by the Ministry of Emergency Situations. Such permits guarantee the conformity of products or services to the requirements imposed by the legislation of Russia.

If the goods are not included in the list defined in the technical regulations, they can be produced and sold on the territory of the Russian Federation without official permits, one of which is a fire certificate. Refusal letter for fire certificate will be required in case of movement of goods that are not included in the list of products subject to mandatory confirmation compliance with the requirements of technical regulations, through customs. A refusal letter for a fire certificate (fire safety refusal letter, refusal letter from the Ministry of Emergency Situations) does not guarantee product quality, but only confirms that the product is not subject to this control.

For some products there is filing a fire declaration. In fact, such a document does not have significant differences from a certificate. The difference lies only in the design features: in the declaration, the applicant himself indicates the full data on the safety of the goods and their quality. Our employees check the information, but the responsibility for accuracy rests with the declarant.

At the request of the seller or manufacturer, fire certificates can be issued on a voluntary basis. Their difference from mandatory permits is that the customer chooses the norms and requirements that his goods must comply with. In this case, fire certificates are also issued for those product groups for which certification is not required.

The presence of such a document has a positive effect on the competitiveness of goods. A voluntary fire certificate provides consumers with additional assurance regarding product safety. In addition, a fire certificate can be obtained both for mass-produced products and for a specific batch of goods, limited in volume.

How fire certification is carried out

The safety certificate is issued on the basis of an application submitted by the manufacturer or seller. At the same time, a person interested in confirming compliance must provide a minimum package of documents and samples of products for research.

Fire tests are carried out in a special laboratory, which has been accredited and has premises that meet the conditions for conducting these tests. Laboratories have necessary equipment to study products for fire resistance, toxicity during combustion, combustibility. Fire tests are carried out in accordance with approved methods. Based on the results of the analysis, a decision is made on the conformity of products established standards. With a positive outcome of the certification procedure, a safety certificate is issued.

PozhStandart LLC has its own testing laboratory, which is accredited by the Supervisory Department of the Ministry of Emergency Situations of the Russian Federation. Examinations are carried out by qualified staff. The laboratory is equipped the latest installations, allowing you to check products for compliance with the requirements of TR.

With the help of laboratory equipment, you can test for:

flammability, fire resistance, combustibility and incombustibility of building materials;
spread of flame over the surface of roofing and floor coverings;
toxicity of combustion products polymer materials using a Bunsen burner and a needle flame burner;
on the incombustibility of cables that are laid in a bundle;
on non-proliferation of cable burning;
determination of the coefficient of smoke formation of solid materials and substances.

The validity of permits providing guarantees in this aspect has a validity period of 1-5 years. At the end of the specified period, you should get a fire certificate again.

PozhStandart LLC offers services for the execution of all types of permits that guarantee fire safety.

Our fire certification body issues certificates and declarations as soon as possible. This is achieved thanks to:

accreditation from the Ministry of Emergency Situations of the Russian Federation;
accreditation from NSOPB;
own test fire laboratory;
own staff of highly qualified experts;
Each customer has a personal manager.

If you decide to order certification, you will need a number of documents.

Documents required for fire certification

A set of documents to receive fire safety certificate for Russian and foreign products is different. If for Russian goods the main customer for mandatory or voluntary fire certification is the manufacturer, while for foreign products it is the importer.

Documents for Russian products, without which fire certification is impossible:

Information about the manufacturer and the name of the product;
Decorated specifications(TU), the registration of which took place in the manner prescribed by law;
Documents confirming the ownership of production area or lease agreement;
Previously obtained fire safety certificates (if any);
Certificate of registration and registration with the tax authorities of the Russian Federation;
Other documentation related to the conditions and features of the technological process.

To obtain certificates of conformity Russian requirements fire safety for foreign-made products, you must provide the following documents:

Documentation (OGRN, TIN, GosKomStat) of the organization - the initiator of the audit;
Specification for products imported under the contract;
Availability of a certificate according to the ISO system;
Conclusion of the SES;
Instructions, product passport;
Label with marking (for some types of products);
Samples of goods in the quantity necessary for the examination.
In addition, to obtain a certificate of conformity of foreign products with fire safety requirements, other documents may be provided (depending on the characteristics of the product).

Schemes for which certification is carried out:

for mass-produced products:

scheme 1d - declaration of conformity of the applicant based on his own evidence;
scheme 2d - declaration of conformity of the manufacturer (seller) based on their own evidence and testing of a standard product sample in an accredited testing laboratory;
scheme 3d- declaration of conformity of the manufacturer (seller) based on their own evidence, testing of a typical product sample in an accredited testing laboratory and certification of the quality system in relation to the production of products;
scheme 2c- certification of products based on the analysis of the state of production and testing of a typical product sample in an accredited testing laboratory;
scheme 3c- certification of products based on testing of a typical product sample in an accredited testing laboratory with subsequent inspection control;
scheme 4c- certification of products based on the analysis of the state of production and testing of a typical product sample in an accredited testing laboratory with subsequent inspection control;
scheme 5c- certification of products based on testing of a typical product sample in an accredited testing laboratory and certification of a quality system with subsequent inspection control;

for limited edition products:

scheme 5d - declaration of the manufacturer (seller) based on their own evidence, tests in an accredited testing laboratory of a representative sample of samples from a batch of products;
scheme 6c- certification of a batch of products based on testing a representative sample of samples from this batch in an accredited testing laboratory;
scheme 7c - certification of product units based on testing of a product unit in an accredited testing laboratory.

"PozhStandart" is accredited by the Ministry of Emergency Situations of Russia, as well as accreditation of the National Union in the field of Fire Safety(NSOPB) and operates legally.

Working with us means saving time and money.

Rights and obligations of the applicant

1. The applicant has the right:

choose the form and scheme of confirmation of conformity provided for certain types of products by the relevant technical regulation;
apply for implementation mandatory certification to any certification body whose scope of accreditation covers the products that the applicant intends to certify;
apply to the accreditation body with complaints about the illegal actions of certification bodies and accredited testing laboratories(centers) in accordance with the law Russian Federation.

2. The applicant is obliged:

fulfill established requirements to the objects of confirmation of conformity that have passed certification, as well as requirements for carrying out work on certification;
take the necessary measures to control the fulfillment of the established requirements for the objects of conformity assessment, to consider complaints;
to provide copies of certification documents in accordance with the requirements of certification schemes for the purpose of carrying out work to confirm compliance;
comply with the established requirements, the requirements of the certification body or certification schemes regarding the use of marks of conformity, references to product certification in the means mass media;
register complaints brought to the attention of the applicant about the performance of work on conformity assessment and related to the fulfillment of requirements for objects of conformity assessment, including those established by certification schemes, and providing them to the certification body at its request;
take appropriate measures in relation to such complaints and any deficiencies found in the objects of conformity assessment that affect compliance with the requirements for objects of conformity assessment, including those established by certification schemes, documenting the actions taken;
inform the certification body about changes that may affect the fulfillment of the requirements for the objects of conformity assessment, including those established by certification schemes.

Fire certification of products is a confirmation of the safety guarantee of manufactured or imported goods. By issuing a conclusion and assigning a certificate, the product certification center accredited by the Ministry of Emergency Situations of the Russian Federation assumes full responsibility for decisions taken. The list of goods subject to mandatory fire certification is regulated by Federal Law No. 123 " Technical regulation on fire safety requirements. Product Fire Safety Certification compulsory procedure for goods that, in the event of a fire, may have an impact on the safety of bystanders. This also applies to products used in the field of fire extinguishing.

Find out if you need a procedure peer review for a group of products that you sell or manufacture.

Benefits of contacting Alfa Fire Safety

Do you need a product conformity certificate? Do you want to increase your competitiveness, or did the inspecting fire inspectorate instruct you to obtain an opinion? We have every opportunity to provide services without the involvement of intermediaries.

Our laboratory is accredited by the Ministry of Emergency Situations of Russia. Alfa Fire Safety is the official certification body for fire safety products, which has earned an excellent reputation for providing services to manufacturers.
The obvious advantage is the presence of our own fire laboratory, on the basis of which there is everything necessary settings and firing test equipment. Moreover, we regularly upgrade our testing facilities.
Qualified specialists in the field of fire certification with experience of 10 years.
We are direct service providers.
We strictly adhere to the deadlines set in the contract for the performance of work.
For product certification, the cost of the service is transparent and understandable to the client. No additional costs.

The obtained certificates fully comply with the requirements of the fire safety inspection, and are a reliable guarantee of your calm business.

Service provision specifics

Our specialists have developed a clear and convenient algorithm for the provision of services so that you can easily issue a certificate for products.

Initial consultation. The need of the customer and the specifics of the products subject to certification are revealed, the price of which will depend on the specific type of product, the specifics of the upcoming tests and their complexity.
The customer draws up an application and transfers to the specialists a package with accompanying documentation and product samples. If by established rules an inspection at the production site is required, the schedule and conditions for the upcoming work are agreed.
A contract is drawn up listing all the upcoming work and their cost.
After payment, our specialists begin to perform their duties.
AT set time the customer receives a certificate of mandatory or voluntary order and a package of accompanying documentation, including a conclusion, acts of work performed. If the product is found to be non-compliant with fire safety standards, a formal negative decision will be issued.
The validity of a fire certificate varies. From 1 to 5 years depending on the type of product. Certificates are registered in the registry. In the event that the conditions for the production or sale of a certified product have changed, the certificate may be suspended or canceled.

Answers to popular questions

What to do if the manufactured or sold products are not included in the list established for mandatory certification, but its purpose raises questions from the inspecting fire authorities?

In such cases, the application for fire certification is submitted on the recommendation of fire inspection or voluntarily, where the applicant is the manufacturer or seller. Based on the testing of samples, a conclusion will be issued whether mandatory fire certification is required for this group of goods.

Do I need any documents from the manufacturer of the imported goods?

Such documents include a copy of the supply contract, a document certifying the quality of the goods and the charter of the importing organization, if the goods are supplied by the manufacturer himself. Learn more from our experts by ordering a consultation at a convenient time for you.

Fire certification

Mandatory fire certification the procedure for confirming the compliance of certain products with the fire safety requirements approved in the Russian Federation is called. Fire certification in Moscow, as in others settlements RF, not only fire extinguishing means, fire detection means and means of personal protection, but also some products general purpose: for example, Construction Materials, cables, building construction and so on.

Distinguish between mandatory and voluntary certification of fire safety. The second is carried out at the initiative of the applicant and is necessary, first of all, to increase the attractiveness of products in the eyes of consumers (i.e. voluntary certification in the field of fire safety allows you to increase the competitiveness of your product / product).

Obligatory fire certification is one of the essential conditions sales of products (included in the list of products subject to mandatory fire certification) on the territory of the Russian Federation. The certification procedure applies to both domestic goods and goods imported from abroad. Also, the passage of fire certification is a prerequisite for obtaining a GOST R certificate (and a number of others) for products subject to fire certification.

Documents required for fire certification

How long does a fire safety certification take?

The time it takes to get fire safety certified depends on the complexity of the device being certified, as well as the institution you applied to. According to general statistics, the certification procedure may take from 5 days to several months. When contacting the Pro-Certification company, you are guaranteed to receive the required certificate (in case the products comply with fire safety requirements) as soon as possible.

Another question that interests our clients: how much does fire certification cost in Moscow? As in the case with the timing, a lot depends on which institution you applied to and what products need to be certified. The cost of certification consists of the cost of registration and issuance of a certificate, the cost of testing. The most expensive part, of course, is the testing itself.

In addition, during fire safety certification, there may be additional expenses: for example, if you need to check the production. It is basically impossible to imagine the cost of this part: each case is unique, which means it will have its own cost.

But we can guarantee that when contacting the Pro-Certification company, the cost of fire certification will be affordable, which is achieved due to the flexible pricing policy of our company.

Fire Certification Procedure

In order to pass the fire safety certification, you need to apply to the Pro-Certification company with the package of documents described above. However, in some cases necessary documentation may differ slightly from this list, so we recommend that you first contact the consultants of our company, who will answer all your questions in detail.

After you provide our specialists with all necessary papers, sampling will begin. If the selected scheme (depending on which product is being certified) provides for production verification, then it is performed on this stage. All fire safety certificates obtained during this stage are recorded in the acts of sampling and production evaluation, while the samples themselves are sent to the laboratory.

In the laboratory, samples are subjected to regulated tests, the results of which are also recorded (in the appropriate protocol). It is on the basis of the protocol that a decision is made to issue (or refuse to issue) a fire safety certificate (the main document establishing the compliance of products with fire safety standards).

If a mandatory fire certification passed by the products successfully, the customer receives a certificate in his hands. If the product does not pass established tests(that is, it does not comply with fire safety standards), then the manufacturer is given a reasoned refusal to issue a certificate.

If your products need to be certified, please contact Pro-Certification. We have experienced employees who value the time and money of clients, so all procedures are carried out as soon as possible (without compromising the reliability of the tests). The company "Pro-Certification" will help you in obtaining the necessary certificates and will do all the work efficiently.

1. By joining this Agreement and leaving your data on the Website http://www.site, (hereinafter referred to as the Site), owned by ESK LLC (hereinafter referred to as the Site Administration), by filling in the fields of online application forms, the User:

Confirms that all data provided by him belongs to him personally,

Affirms and acknowledges that they are attentive to in full read this Agreement and the conditions for processing by the Site Administration of his personal data indicated by him in the fields of online applications, the text of the agreement and the conditions for processing personal data are clear to him;

Gives consent to the processing by the Site Administration of the personal data provided as part of the information in order to conclude this Agreement between him and the Site Administration, as well as its subsequent execution;

Expresses consent to the terms of processing personal data without reservations and restrictions, namely, with the Site Administration performing the actions provided for in paragraph 3 of part 1 of Art. 3 federal law dated July 27, 2006 N 152-FZ “On Personal Data”, and confirms that, by giving such consent, he acts freely, according to his will and in his own interests. Personal data refers to any information relating to a directly or indirectly identified or identifiable to an individual(citizen).

2. The user also gives his consent to the processing and cross-border transfer of personal data to the Company's contractor for sending marketing and information mailings.

4. The basis for the processing of personal data are: Article 24 of the Constitution of the Russian Federation and Article 6 of the Federal Law No. 152-FZ "On Personal Data" with additions and changes.

5. During the processing of personal data, the following operations will be performed: collection, storage, clarification, transfer, blocking, deletion, destruction - all of the above actions only for the purposes specified in clause 2 of this Agreement.

6. The Company undertakes not to transfer the information received from the User to third parties. It is not considered a violation to provide personal data to third parties acting on the basis of an agreement with the Company to fulfill obligations to the User and only within the framework of this Agreement.

7. Personal data is stored and processed until the completion of all necessary procedures or until the liquidation of the Company.

8. The Agreement is valid indefinitely from the moment the User provides his data. Consent can be withdrawn by the User or his representative by sending a written application to the Company by e-mail [email protected] website. The user may also opt out of receiving electronic messages using the "Unsubscribe" link located at the end of each email.

9. The user accepts the cookie policy used on the Site and agrees to receive information about the IP address and other information about his activity on the Site. This information is not used to identify the User.

10. When processing personal data, the Company takes the necessary and sufficient organizational and technical measures to protect personal data from unauthorized access to them, as well as from other misconduct regarding personal data.

11. The Site Administration has the right to make changes to this Agreement. When making changes in the current version, the date of the last update is indicated. The new version of the Agreement comes into force from the moment of its placement, unless otherwise provided new edition Agreements.