How to clean the gas stove grate? How to clean a gas stove grate.

Kitchen hood - important element technology that creates comfortable conditions cooking and eating. Untimely cleaning of the filter and grate reduces the performance of the unit, allowing the formation of soot in the kitchen. The exhaust hood, which eliminates unpleasant odors and prevents the formation of soot, must also be cleaned periodically. An increase in operating noise and a decrease in productivity are the first factors in the pollution of cleaning equipment. How to clean the hood inside, even if it is impossible to clean it with a sponge and detergent from the outside? The presence of a suction effect attracts evaporation particles to the surface of the unit, thus forming a sticky coating of fat on the device.

Cleaning kitchen hood is a rather labor intensive process. Before washing, it must be completely disassembled. But the most difficult thing in the process is the direct cleaning of the mesh and filter from soot and dirt. Depending on which material body and parts are made, selected special remedy for cleaning. Which tool you need to use is usually indicated in the instructions for the device. Incorrectly used detergent can damage the elements of the unit. Therefore, it is very important to know how to clean the hood in the kitchen correctly.

Before proceeding with the cleansing, you need to take a few steps:

study in detail the instructions and recommendations of the manufacturer on the issue of cleaning specific parts;
to study the list of collapsible sections of the structure;
disconnect the equipment from the mains;
dismantling and disassembly is carried out according to the process description in technical documentation- this will allow you not to lose parts and correctly fold them back.

If you want to know how to wash the hood in the kitchen, follow the following standard algorithm of actions:

Remove the top surface of the housing.
Extract grid covering the internal cleaning system.
All details and retainer must be removed and soaked in a separate container with soapy water, as they will also be present greasy coating.
Take off filter.
Unscrew the pipe leading to the vent hatch polluted air.

After you managed to dismantle the device and remove all dirty parts, you can both wash the hood from fat and process all the elements, including the outer case.

Ways to clean the kitchen hood

The most affordable and effective means of cleaning grease from any hood in the kitchen are home remedies. How can you wash the hood if it is not used very intensively, and the cooking process occurs from time to time? The cleaning interval can be 6 months using normal dishwashing detergent and a sponge. All parts and the air filter will be washed with soapy water. But before cleaning, you should make sure that it is to be washed, and not replaced.

To make the separation of contaminants easier and faster, cleaning should be done quarterly.

With the formation of a sticky coating with a thick layer of greasy dirt on the mesh, it will be necessary to use stronger products. Options for cleaning the kitchen hood can be as follows.

Cleaning with soda

Treatment with soda solution

It is the fastest, safest and cheap way mesh cleaning. The procedure includes the following steps:

Select a container that can boil the grate in solution, depending on its dimensions. If it is large and does not fit in any pan, you can take any dishes into which it will fit in width and clean from both sides in turn.
Preparation of soda solution: 0.5 tbsp. dilute soda in 3 liters of water.
The cleaning process takes 20-30 minutes, depending on the degree of contamination.

in boiling water soda solution particles of any origin are separated, while the structure is not scratched.

Treatment with ammonia

If the pollution is old, and when boiling in the soda solution, there are residues of pollution, you can wash the grate of the hood with ammonia. For these purposes, you need 0.5 tbsp. alcohol diluted in 3.5 liters hot water. Considering that ammonia has Strong smell, it is better to carry out the procedure in a mask so as not to burn the mucous membrane, as well as open the window. The soaking process will take 1-1.5 hours, after which the mesh can be washed under running water and dry with a towel or paper towel.

Ammonia for cleaning

soap solution

The use of a soapy solution requires a rough cleaning of the hood from fat, since a sponge will not help much for these purposes. Here you need plastic or metal scraper. To prepare the solution, you need the usual 72% laundry soap dissolve in hot water, with a concentration of 0.5 bar of soap per 3 liters of water. Small parts can even be boiled, and the mesh can be rubbed with a solution and mechanical processing can begin.

Acetic acid

If you don't know how to clean a greasy hood grate, try this method: acetic acid treatment is also effective tool to remove sticky dirt. The smell is pungent, so access must be provided fresh air. All the elements are rubbed with a sponge dipped in vinegar. 7-10 minutes are enough to separate the contaminants. After treatment with an acid solution, the parts should be washed in running water.

Lemon acid

With weak pollution, you can use lemon, it, as in the case of acetic acid, is capable of break down fat particles. Lemon treatment of the hood body is very effective, which also attracts dirt and soot forms on it. Instead of lemon juice, you can use dissolved citric acid at the rate of 2-3 tbsp. for 1 liter of water.

Chemicals

This method is used for old fatty formations, when the hood was not cleaned long time. For these purposes, it is used drain pipe cleaner You can try oven cleaner. If the consistency is liquid, it is worth soaking the grate and other parts for 10 minutes, and rinse hot water. The powder must first be diluted in water, and then processed.

The cleansing process will take no longer than any other treatment. kitchen appliances. Regular cleaning of the filter, even in an ordinary soapy solution, will not allow soot to settle on the grill and other internal parts. If available, you can wash the elements of the exhaust hood in dishwasher. Regular maintenance of exhaust equipment will reduce the cleaning time of all parts of the structure and extend the performance of the unit.

Cleanliness in the kitchen is very important for any housewife. We can say that the methods described in the article are suitable not only for cleaning hoods. Vinegar, lemon acid and soda are used to clean the most different surfaces. To make the kitchen shine, read the rules for cleansing and its fellow,. Many do not suspect, but the dishwasher needs regular cleaning, and how to do it right, ours will tell you.

Have you ever wondered why the grates on gas stoves are black?

This is probably done so that the soot, which eventually appears on them, is not immediately evident. It is the black color that weakens the vigilance of the housewives - for the time being it seems to them that the lattice is clean.

In fact, dirt accumulates daily, so it is advisable to wash it regularly, but, as practice shows, rarely anyone adheres to this rule. We begin to clean the grate of the stove when the rods become rough to the touch, and the carbon deposits are clearly visible. On the this stage many have difficulties: it is quite difficult to return the original purity.

I bring to your attention a few simple ways, with which you can very quickly cope with fat and soot.

What material is the grate made from?

First, determine what material the rods are made of. This information can be found in the instructions for the gas stove, you can ask your husband, last resort contact a specialist. This is very important, because for each material there are different methods removal of accumulated soot and grease. As a rule, rods are:

covered with enamel;
steel;
cast iron.

Having found out which grate is installed on your stove, feel free to proceed with the cleaning process.

How to wash enamel rods

Enamel can be easily scratched, so iron brushes should not be used. It is best to wash such a grate in a dishwasher, if, of course, you have one. To do this, place the enameled part of the plate in the compartment for dirty dishes, fill in the washing liquid and turn on the machine. At the end of the process, remove the part and dry it properly.

Enamel is perfectly cleaned with mustard powder. Wipe the wet surface with dry mustard, leave for several hours without rinsing. Rinse under running water, dry well.
Instead of mustard, you can use soda or vinegar: they also do an excellent job with fat and soot.

br />

Best and fastest grate gas stove clean from fat with a mixture of soda and water. You need to rub the grate with this mixture and leave it for a while. Then clean it with a steel wool.

An effective, inexpensive folk method. Here's a video showing how to do it:

If you can’t immediately get rid of fat, you will have to repeat everything from the beginning.

Cleaning the steel grating

Steel is not afraid of abrasives or chemicals, so there are a lot of cleaning options:

The easiest way is in the dishwasher. Pour a large number of dishwashing liquid and turn on the appliance. At the end of the procedure, dry the part well.
Use the pre-soak method. To do this, dissolve any dishwashing detergent in water, soak the rods overnight. In the morning, rinse the part of the gas stove, if necessary, scrape off the remaining deposits with a knife or a hard abrasive.
Using a wire brush, carefully clean the surface with sand or soda. Rinse with water and dry well.

At the end of the cleaning procedure, apply the following mixture to the washed surface:

soda ash - 6 parts;
washing powder- 1 part;
clerical glue (transparent) - 2 parts.

Allow the mixture to dry after application. AT next time When you need to wash the grate again, just rinse it with warm water. Carbon deposits and grease will easily come off along with a protective layer of glue and soda.
It is advisable to repeat this procedure regularly.

Cleaning cast iron surfaces

Cast iron parts require quite careful handling. It can not be washed in the dishwasher, scraped with sharp objects, hit. You can clean the cast-iron grate of a gas stove from fat in the following ways:

In the country or in nature, make a fire and singe the rods well. When heated, pieces of fat and dirt will fall off. After that, wipe the part with a damp cloth and dry it.
If it is not possible to ignite on an open fire, use burners on a gas stove. Turn on the hood at full power, open the windows and bake the rods until the fat is completely burned. Wipe and dry afterwards.
You can clean the grille with a car engine cleaner. Treat cast iron well, then rinse and dry.
You can clean cast iron from carbon deposits with a metal brush, but this must be done carefully: metal particles are scraped off along with fat, and the rods gradually become thinner.
Preheat the oven, put a heat-resistant container with water on the bottom. Lay the cast iron piece on top. Under the influence of steam, pieces of fat will gradually begin to fall off.

Try to limit the contact of the cast-iron part with water as much as possible; it is only permissible to wipe the rods with a damp cloth at the end of any procedure.

Try to wash the gas stove grate after each cooking, especially if you have fried something.

Be sure to wear protective gloves during the cleaning procedure, even if you use only home remedies (vinegar, soda, mustard powder).

Enamelled and steel parts will be much easier to clean if they are pre-soaked overnight in a soda or vinegar solution.

After you have managed to wash the grates of grease, wipe dry the entire surface of the grate with a clean cloth. This must be done, otherwise the droplets of fat will again happily stick to it at the first opportunity.

You can do without radical methods of cleaning the grate: it is enough to immediately remove fresh dirt from it.

Appliances work for us: dishwasher and steam generator

If the house has a dishwasher, and the grate is disassembled into parts, the fight against fatty deposits will not require much effort from the hostess. One cycle in intensive mode is enough for the grate to regain its original purity. If fat deposits have been accumulating for several months, the dishwasher will most likely not be able to cope with them right away. In this case, after the end of the first cycle, without waiting for the end of drying, you can remove the grids and process them manually: brightened and softened fat deposits without special work removed with a knife or a stiff brush. You can do without " handmade", but then for complete cleaning grates will need one or two more wash cycles.

A household steam generator can also help clean dirt from the gas stove grate. Steam has a temperature of about 140 ° C, and this is quite enough to remove carbon deposits and greasy deposits from the cast-iron surface. To clean the grilles, a small round nozzle with hard bristles is usually used, however, it is not always possible to reach hard-to-reach places, so dirt can remain in the corners. But the cleaning of the plate in this case occurs without the use of any household chemicals.

Grid cleaning with soaking

In order to economize own forces, it is better to “soak” the dirt in the solution before cleaning detergent. This can be done in an enamel bath or a large basin. Dissolve grease in very hot water (you can use stove and oven cleaners, gels for kitchen surfaces, dishwashing liquid, or any other alkaline agent). You can also use regular soda. Immerse the grids in the solution for several hours.

Alkali dissolves grease, and softened deposits will be much better cleaned from cast iron. You can apply the cleaning agent (already undiluted) to the grate again before washing and leave it for 10-15 minutes to act.

To clean the grate, it is better to use not sponges (they wear out very quickly on cast iron), but a stiff brush or a metal washcloth. Angles and hard-to-reach places can be processed with an old toothbrush.

Cleaning without soaking

If the grate is one-piece and cannot be immersed in water, you will have to do without soaking. In this case, you will have to use more aggressive detergents. As a rule, special sprays for cleaning ovens and products marked “Anti-grease” are used to clean dirty grates.

Moisten the grate with water, treat with a product, leave to act for 10-15 minutes, then carefully brush. At heavy pollution this procedure will have to be repeated several times.

note

If you clean the grate without removing it from the stove, cover the surface of the stove with foil, then dirt and cleaning agent will not enter the nozzle.

Even if you use a mild detergent to clean the grates, wear rubber gloves. Cleaning the grates is a dirty job, and the risk of scratching your hands or breaking your nails is quite high.

Before cleaning, you can ignite the most polluted places over the fire to burn out fatty deposits.

For many housewives, cleaning the gas stove grate is the most unloved job. Often there is not enough strength for it - and then the layer of soot increases catastrophically, making the process of its removal more and more difficult.

But there are many elementary ways that will help to clean the entire structure without much effort, including hard-to-reach places.

Cleaning technology

How to quickly clean the grate of a gas stove from carbon deposits at home? To do this, you need to perform only two steps:

figure out what material it was made from;
choose the best tool in accordance with the degree of contamination of its surface.

We determine the material of the product

It is problematic to determine the material from which the grate is made after intensive use of the plate. You'll have to remember what it looked like when you bought it. One of three options is possible:

uncoated steel bar;
steel bar coated with enamel;
cast iron.

Cast iron structures are distinguished by their high weight and quality factor. Profile cross section lattice body - trapezoidal. Another difference cast iron product- its elements do not cross the burner.

Cast iron is completed with expensive models of gas stoves.

Cleaning methods

All known ways removing carbon deposits from gas stove grates can be divided into three groups:

using household appliances;
manually with soaking;
manually without soaking.

Using household appliances

The structure can be cleaned using a dishwasher or steam generator. The dishwasher will do an excellent job if the fatty coating is not old.

In this case, during one cycle of operation of the machine in intensive mode, it is enough to completely remove carbon deposits. After washing, the grate, which is thoroughly overgrown with fat and soot, will have to be cleaned manually with a knife and a stiff brush.

If you use a steam generator, you can use it: choose a hard round brush as a working nozzle.

Soak cleaning

How to clean a cast iron grate if there is neither a steam generator nor a dishwasher in the house? You can facilitate the process by pre-soaking the structure in a detergent composition. To prepare the working solution, you can use gels and liquids intended for kitchen surfaces. The product has large dimensions, so you can soak it either in a large basin or in a bath. A few hours later, armed metal washcloth or a brush (its bristles should be stiff), you can easily remove the soaked layer of dirt.

Cleaning without soaking

Not every housewife will risk her snow-white bathroom for the sake of cleaning kitchen utensils. You can refuse soaking by using aggressive detergents. They can be distinguished from conventional drugs by the label "Antifat".

The cleaning process is as follows:

The grid is pre-wetted with water;
Then a cleaning agent is applied to its surface;
After ten to fifteen minutes, the product is processed with a stiff brush.

It did not work the first time - you have to repeat the procedure again.

Folk remedies

There are two verified folk ways grate cleaning:

Roasting: the structure is held over an open fire until the fat layer is completely burned. Only steel bars can lead - at the end of the cleaning procedure, it will have to be corrected.
Place the structure in a trash bag. Throw a pack in there. baking soda and add hot water. You can also put pens in there. Tie up the package. After a few hours, the grate can be easily washed with a sponge.

And here is another way to clean with soda. Watch the video:

You can do without radical methods of cleaning the grate: it is enough to immediately remove fresh dirt from it.

As a result of daily cooking, the stove grate inevitably becomes dirty, quickly covered with a layer of fat and soot. It's hard to remove it. The fact is that we usually pay attention to such pollution when the layer is already thick enough. The problem of how to clean the grate of a gas stove worries almost all housewives, so it is necessary to consider the most effective ways.

Types of pollution

When we use the stove, dirt on the grate is inevitable. First of all, it is fat and the remnants of food that spilled out during boiling. However, there are always other sources:

dust that is generated in the house and gets into opened window, settles on the grate and, due to the high temperature, is tightly welded to it and creates soot;
pet hair: cats can climb on the stove to warm themselves;
villi from the outfits of people who cook, especially if they are wearing a warm jacket or bathrobe.

Since there are always many sources of pollution, and we are too lazy or forget to wipe the entire kitchen every day, the question of how to clean the grate from a gas stove always remains relevant.

Features of cleaning structures made of different materials

You can clean the grate with ordinary detergents, which are sold in abundance in household chemical stores. However, they can damage the surface and irritate the skin of the hands. Therefore, when cleaning, be sure to wear rubber gloves, and this is quite inconvenient. Folk remedies will be much more useful and even more effective.

When deciding how to clean the gas stove grate, it is worth considering the material from which it is made: enamel, steel or cast iron.

Mustard powder is most suitable for an enameled surface: it must be diluted with water to the consistency of thick sour cream, applied to the surface, rubbed with a sponge for washing dishes and washed off warm water. Such a lattice is completely contraindicated for "aggressive" chemicals and iron brushes and nets, you need to clean it as delicately as possible. In general, this design is best washed in a dishwasher with a special washing liquid. If there is no such technique or the grate is too large and does not fit into it, you should resort to the help of mustard.
The steel grate can be washed with dishwashing detergent using a sponge or a stiff brush. Such a surface is not afraid of either a metal brush or “aggressive” household chemicals. It is better to soak it overnight and clean it in the morning. Of the funds for her, both mustard and ordinary sand are well suited.
The cast iron grate from the gas stove is the most difficult to clean. Hard scrapers and strong household chemicals are also unacceptable for working with it. Preheating required for best results. At the same time, it is very undesirable to wash it in the dishwasher.

Working with cast iron

Preparing the cast iron grate:

turn on the stove, heat the structure over an open fire, the pollution will begin to fall off;
put the pot to boil so that the steam falls on the dirtiest places;
heat the oven, put a heat-resistant dish with water in it, wait for it to boil and insert the grate: under the influence of steam, dried pieces of fat and soot will fall off, you need to heat for about 15 minutes;
you can use a steam generator;
when cleaning the grate of the stove in the country or in a private house, you can heat it over a fire.

During heating, there is bad smell from burning fat, which is also quite harmful, so during this process you should open a window in the kitchen.

At the same time, contact with water should be minimal, it is possible to wet the grate only at the very end when washing off the product, but it is better to simply wipe it with a damp cloth.

The best folk recipes

The problem of how to clean a cast-iron grate (and from other materials) can be solved using ammonia, dry mustard, vinegar, laundry soap or soda.

The easiest way to cleanse is to use alcohol or mustard. It is necessary to spray the grate with ammonia from a spray bottle or apply the powder with a damp cloth, leave for an hour or two in plastic bag or in a basin, then carefully treat with a sponge and rinse with warm water.

A mixture of laundry soap and office glue is also effective. You need to clean the grate in it as follows:

grate soap 72% on a grater, pour into a container that can fit a wire rack, pour water, add glue (150 ml), mix thoroughly;
to boil water;
place the structure in the mixture, “cook” over low heat for about an hour;
take out and wash without letting cool.

In order not to burn your hands, you should take an oven mitt or put on special mittens.

Recipe with soda:

put the grate in a bag or trash bag, pour soda there (a whole pack), pour water;
tie the bag and shake it properly so that the soda dissolves and covers the entire structure;
shake the bag periodically for 2 or 2.5 hours;
after this time, rinse thoroughly.

Similarly, you can wash the cast-iron grate with soda and vinegar:

half a pack of soda and half a standard pack of vinegar should be dissolved in water in a large container;
put a structure there;
soak for 2 or 3 hours;
Rinse.

Salt solution is also effective:

fall asleep in 0.5 liters of water 2 tbsp. salt;
smear the surface with this product and leave overnight;
in the morning wipe with a damp cloth or sponge, and then dry;
after that, grated laundry soap, soda ash and vinegar should be mixed (25, 20 and 50 g, respectively);
smear a dry grate with this composition;
wipe off after 2 or 3 hours.

Such additional cleaning will help to get rid of old dirt better.

Coca-Cola and similar harmful carbonated drinks are well suited for cleaning: the phosphoric acid contained in them dissolves the fat.

Cast iron grates are heavy and difficult to clean, therefore, to make it easier to get rid of soot and grease, it is recommended to wipe the structure with a damp cloth after each cooking. No need to wait for complete cooling, it is better to clean it warm. If the state of the structure is running, it is necessary to soak it in a cleaning agent. Wash off with a soft cloth. If the structure can be disassembled into parts, it is better to do this - it will be much easier to clean it.

In search of an answer to the question of how to clean the grate on a gas stove at home, housewives often forget about the rules for organizing this procedure. As a result, the effect is weak, or they harm their health. Therefore, it is always important to observe the following rules:

when using household chemicals, as well as soda and vinegar, gloves should be worn;
the cleaning agent must be applied to the surface evenly, preferably in a thick layer, keep for as long as indicated in the instructions;
after rinsing, it is necessary to wipe the grate dry, because new drops of fat, dust, etc. will very quickly stick to a wet surface, besides, the water contains particles of detergent and salt; if they are not removed in time, stains will remain;
when we clean the stove, we need to ventilate the kitchen, especially if we work with chemicals;
the grate should be removed from the stove, and if this is not possible, an oilcloth should be placed under it so that the product does not get on the surface and burners (it is better to clean them separately).

To make the stove less dirty, it is important to choose the right dishes for cooking and carefully control this process. It is better to take a frying pan with high sides - this way it is less likely that the fat will splash during frying, and besides, if possible, cover it with a lid. Be sure to carefully monitor that boiling soup or milk does not run away, and if this happens, you must wipe it off immediately, without waiting for it to dry.

Also, to protect the gas stove grate from grease and other contaminants, you can prepare a special mixture. It is necessary to mix soda, washing powder and glue (6:1:2) and smear the surface. This protective layer will pick up all the dirt. For the next cleaning, it will be enough just to wipe the grate with a damp cloth.

The surface of the stove gets dirty quickly and needs to be cleaned frequently. However, it is important to know not only what to wash, but also how to prevent the appearance of soot. Careful preparation of food and regular cleaning will help to deal with dirt more easily. Numerous home remedies will also clean it well.