Types of slats for the bed, design features and purpose. Wooden slats for a Reiki bed of an orthopedic base how to bend

About the benefits orthopedic base a lot has been written for the health of the spine, so the demand for such mattresses is unusually high. But when you come to the store for the “right” mattress, or choose a sofa with a quality bed, you could hear information from consultants that there are special devices - slats that reinforce orthopedic effect mattress. What are lamellas? How do they work? What furniture are installed on, and is it possible to make them yourself? In this article we will talk in detail about the lamellas, and we will reveal the questions posed above.

What are lamellas and why are they needed

slats- These are thin, moderately strong plates that are part of the frame of bedroom furniture, and are used as the base for the mattress. They are made from veneer, i.e. glued together thin sheets wood, which gives the plate flexibility, and the mattress lying on it - an enhanced orthopedic effect.

Classic, “correct” lamellas are made of beech, which is distinguished by hard, dense wood. Veneering gives it flexibility, and if the wood is of high quality, then deflections will not affect the plate in any way, it will withstand high loads, easily return to its original position, and will not break. But to reduce the cost of production, lamellas are often made from other, less durable wood species, and covered with a single layer of beech veneer on top. Naturally, the service life of such plates is significantly reduced, and under increased loads, they can generally crack or break. Beech lamellas are able to withstand up to 40 kg. weight per plate, which characterizes them as an ideal material for this type of base, because each plate is fixed separately, at a distance, and copes with its part of the load on its own.

The lamella-based frame creates good ventilation for the sleeping place, moisture evaporates quickly, the mattress does not differ heavy spirit. Another design makes it easier to clean and care for furniture, perfect for people with allergies, because it does not contain additional dust collectors.

Types of slats

These products have several varieties, and the range continues to expand, thanks to new technologies, design methods. Types of lamellas are ranked by:

size;
material of manufacture;
rigidity;
fastening methods.

Regarding dimensions, there are two standard plate widths: 68 mm. and 53 mm., with the same thickness of 8 mm., individual length, depending on the size of the bed. In the furniture industry, wide slats are more popular, because they have a more aesthetic appearance, are considered the European standard, and less of them are needed to form the base. Narrow slats due to more, provide the best spring effect, so they can be used in tandem with any mattress. There is no fundamental difference in the width of the plates and the quality of sleep, therefore, the choice of slats is best left to the master, who will evaluate the design of a particular model and select the ideal slats for it.

Plates for the frame are made from alder, birch, beech, sometimes pine veneer. As we have already stated, the best option beech is considered. Alder and birch belong to the economy segment, since the service life of such rails is lower due to the low density of the raw material. Pine can be the basis for a single bed, or children's furniture, because its wood is soft and will burst under heavy loads.

Lamellas also differ in the degree of rigidity. There are spring, more flexible, recommended for adults to unload the spine, and straight plates that do not provide for deflection. They form a fairly rigid, even surface, ideal for a child's spine.

The method of fastening the rails depends on the material of the frame. It can be metal or wood. The first one is more durable, rarely creaks, and is able to withstand childish pranks. The second requires careful handling, the service life and degree of wear depends on the raw materials from which the bearing parts are made. The plates can be inserted directly into the frame, or special lamella holders attached to the frame. They are produced in the form of staples, rivets, and differ in price and raw materials.

Which sofa is better: spring or lamella-based

With the dilemma of choosing a new upholstered furniture faced by many people. The more information is known, the more difficult it is to decide, especially if we are talking about the filler. Each material has its own advantages, disadvantages, giving the product originality. Today we want to compare sleeping place with a spring block, with the same one based on lamellas, and decide which sofa is better.

So, the springs in the sofa allow:

do not use additional “sofa” mattresses, since the spring block inside does an excellent job of supporting;
withstand additional loads;
create a light effect of depreciation, to unload the spine.

The slats used in the design of the sofa provide:

tangible orthopedic effect;
long service life of furniture;
less dust accumulation in the bed;
enhanced air exchange.

If the main purpose of the future sofa is to use it for sleeping, then it is better to choose a model with lamellas, since it is more practical in terms of care, it accumulates much less dust than its spring counterpart. Also, due to good air circulation, it will protect the filler from the development of pathogenic microflora. If the sofa is purchased for gatherings in the living room, then there will be no fundamental difference between springs and lamellas, both types of filling can provide a comfortable location.

The distance between the slats and the choice of mattress

slats- a delicate matter, in the literal and figurative sense of the phrase. In order for them to serve for a long time, it is necessary to take into account all the nuances. For example, the number of rails in the bed, their width, distance from each other. These data will help you choose the best mattress for the purchased bed, and enjoy your daily, healthy sleep.

Each manufacturer, at its discretion, outlines the distance between the plates, guided by a single rule: the gap between the lamellas should not exceed the width of one bar. So, if rails with a width of 68 mm are installed on the frame, then the distance between them can be 65 mm, 50 mm, 25 mm. If the strips are narrow (53 mm.), Permissible gaps start from 50 mm. How does this information help when choosing a mattress? According to existing standards, an ideal surface is ensured while maintaining the pattern: the higher the density of the springs in the mattress, the smaller the gaps between the slats. So, if you want to sleep on a block of independent springs, or on a latex mattress, you need to choose a base with minimum distance between planks. By giving preference to classic dependent springs, you can use a base with fewer rails.

Is it possible to make slats for the bed yourself

You already know what lamellas are, what they are for, and now I want to move on to a more burning question: how to make them with your own hands, install them on the bed? Of course they answer experienced craftsmen. It is possible not only to replace the cracked rail, but to equip old furniture correct, orthopedic base. To do this, you can take beech, birch plywood, 8 mm thick, and cut it into planks yourself standard width. Also a popular material from which “homemade” lamellas are made are wooden mounting rails, sold in every hardware store. Their craftsmen cut them in length, width, bringing them to close to the factory parameters. However, it should be remembered that such work cannot be carried out without special tools, so it is permissible to purchase ready-made lamellas. desired length and install them yourself. Fortunately, the range of furniture centers allows you to buy and replace any item by the piece.

Summing up, we can confidently say that the lamellas are a very comfortable, practical material, easily self-repair, and providing healthy sleep to its owner. On the big choice furniture based on lamellas, and it will definitely not leave you indifferent.

Choose the width of your lamella Orthopedic bed slats(latoflex, armor), or as they are also called bed slats, are birch veneer glued in several layers and specially cut, so that it forms oblong plates, they are pressed at a certain angle and resemble plywood strips. Each lamella has an equally curved shape, which allows them to perform the orthopedic function of a spring, which straightens when pressed on it, and rises back when getting up from the bed.

Bed slats - material and production methods

Nowadays, veneer is usually obtained in two main ways.
sawing and planing. In accordance with the method of production is set and the cost of the material. Sawn veneer has more high quality and, consequently, a higher price than planed. The manufacturing technology of our bed slats according to GOST includes a whole range of complex operations, which include manufacturing processes using high-tech equipment by sawing to obtain a product premium. The main raw materials for the manufacture of latoflex are birch and beech. Beech is a rather expensive material, so birch latoflex has more demand and application, and in quality it is practically not inferior to beech.

Today, buying slats in Moscow is not a big deal, so before you make a purchase, read, spend five minutes of your time and find out what quality your bed slats will be so that you don’t return to this problem again in two or three months. And remember, our high-quality lamellas are the cheapest!

Below are orthopedic armors of various sizes in length and width, so as not to get confused and not look for the one that suits you for a long time, go to the MAIN PAGE and select the necessary lamellas individually, initially taking its width as a basis.

Many people face this choice when it comes time to buy a bed. The question arises, why buy an orthopedic base when you can get by with an orthopedic mattress?

If you decide to improve your body, choose a bed with an orthopedic base.

Buying good orthopedic mattress- this profitable investment for your comfort and well-being.

In this article, we will answer this question and tell you what are the advantages and disadvantages of the grounds, what to look for when buying.

There are two categories for beds: flat solid and orthopedic slatted.

1) Flat solid is a surface made from planed boards, plywood or chipboard (made from pressed wood shavings). Treated with protective and decorative means attached to the frame. The solid base is heavier than orthopedic, less mobile. And most importantly, it does not allow the mattress to reveal all its orthopedic characteristics and capabilities. Thus, sleep worsens.

Such a base interacts worse with the mattress due to poor ventilation, therefore, its service life is reduced.

2) Orthopedic slatted bed base is made of metal or wooden frame with a lifting mechanism and legs, wooden slats that are attached to it with lat holders.

Lamels are wooden curved planks.

Lamels can be made from the following types of wood:

Birch;
Beech;
Nut.

Birch lamellas are the optimal material. They perform their functions adequately and at the same time are cheaper than lamellas from other types of wood.

Walnut and beech lamellas are more expensive, but they are durable and can withstand more weight.

Standard lamella sizes:

Thickness from 6 to 8 mm;
Optimum width 63 mm;
Length according to base dimensions;
The distance between the lamellas is 70-80 mm, this distance improves the orthopedic effect;
The optimal number of lamellas is from 11 to 13 pcs.

The slats provide a comfortable and anatomically correct location body.

Such sizes of slats make the bed lighter. They give it elasticity, harmony of interaction with an orthopedic mattress, which allows you to achieve maximum comfort.

The lattice from lamellas maintains loading to 150 kg.

All orthopedic bases pass all mandatory strength tests.

Design features of a bed with an orthopedic base

In addition to these advantages, this design allows the bed to be more mobile, which will significantly save space in the car when moving, and facilitate unloading and loading.

This option is well suited for a rented apartment, motels, hotels.

Sleeping structures with such bases are disassembled and assembled without much effort, the following elements are separated from the frame:

Sleeping place;
Legs;
Upper base with lamellas;
The lower part, with drawers for linen.

The disassembled structure can be transported by car.

Such designs are equipped with a lifting mechanism, have the ability to compactly store things and bedding.The legs are detached, the slats are pulled out of lat holders , remains a metal frame with a mattress.

All other parts of the structure are compactly folded into a box.

Designs are available in 2 types:

1) Without stiffness adjustment;

The base of the bed without the ability to change the rigidity of the slats.

2) With adjustable stiffness (a very important, at the same time convenient feature for double structures).

This function is convenient for a bed on which people with different weights sleep.

Using the adjustment, you can adjust the rigidity of the orthopedic base, individually for each person lying on it. There are 7 hardness zone points:

Head,
Shoulders
Back,
Hips,
Lap,
Feet.

A bed with the ability to adjust the rigidity of the slats along their entire length.

To the base of the bed, it is important to choose the right mattress. Orthopedic mattresses are made with different fillers. These are mainly springs, horsehair, coconut coir, natural latex.

All these fillers do not cause an allergic reaction, are well ventilated and moderately elastic, which creates maximum effect for a comfortable sleep.

Dimensions

The length of the base should be 20 cm more than a person's height, the width of a single base should be at least 80 cm. Such dimensions allow you to comfortably sit on the bed.

A bed with such dimensions does not take up extra space in the room.

The legs are made of high-strength metal, the most convenient length of the legs is 24-25 cm. The height of the base depends on them. The stability of the structure is ensured by the number of legs (there are up to 7 of them on the frame).

To strengthen the structure, a central frame runs in the middle.

The total height is 27-28 cm, it all depends on the manufacturer. The lamella grid serves to properly distribute the weight on the mattress and prolong the life of the mattress.

Choosing an orthopedic base

When choosing, you need to pay attention to the following factors:

The quality of the lamellas (they should not have large knots and cracks);
The base should not creak, creaking causes discomfort;
The metal frame should not have rust, chips and scratches;
Wooden bases should not have loose holes for fastening, sharp raw edges;
Complete set of accessories;
Lamels should not have chips;

An important criterion is the brand of the product, because the quality of the product depends on the comfort of sleep, the service life of the orthopedic base.

The details of fastening the slats affect the price and quality of the bed. The slats are attached to the base -lat holders.

Lato holders are fasteners designed to hold the lamellas in the sleeping structure.

The slats are attached with the convex side up. They are rubber and plastic. Rubber is more flexible and more expensive.

Plastic lato holders are cheaper, but more rigid and durable than rubber ones.

Orthopedic bases are produced with a lifting mechanism. Mechanisms are divided into several types.

The manual mechanism is reliable and has a longer service life than all the others, but inconvenient, because you have to hold the base and the mattress at the same time when opening.
Spring-loaded, difficult to rise, but does its job well, over time it has to be changed due to the fact that the springs are stretched.
Gas shock absorbers open smoothly and silently, mainly used to lift heavy bed structures.
lifting mechanism with electric drive– it is convenient to use it, it is set in motion by the control panel.

Lift beds can be equipped with linen drawers, thereby saving space in the bedroom.

The legs are made of high-strength metal, have a comfortable height, can be easily detached and attached to the bed frame, provide stability to the entire structure and additional mobility of the bed.

Orthopedic base with adjustment

There are two types of adjustment.

1. Adjusting the stiffness of the lamellas.

This adjustment allows you to adjust the bed to your weight.

2. Adjustment of the upper and lower parts of the base.

This type of adjustment will allow you to comfortably enjoy breakfast, ensure the outflow of blood to tired legs, laying them at an angle.

From such functions, reliability and strength are not lost, since manufacturers take into account all the necessary points during testing.

Summing up

The advantages of classic beds with a solid base are that they are designed for a greater weight of a person than with an orthopedic lattice and are more stable due to their weight.

The disadvantages of the bases of such beds are that they are more bulky, less mobile, they have a shorter mattress life, they are more difficult to repair than beds that have an orthopedic base.

Beds with an orthopedic base also have a number of advantages and disadvantages.

The advantages of such beds are much greater than the disadvantages. They p designed for weight up to 150 kg, l light in weight, m plentiful, b dismantled and assembled quickly. Is inthe ability to adjust the rigidity of the bed individually. There is a largevariety of designs, wwide price range.The frame can be used independently of the bed. The beds supplied with the lifting mechanism are convenient in operation.

In the manufacture of such beds are used modern technologies, which expands their capabilities and gives additional comfort.

The only downside is that these bedsdesigned for less weight.

If the sleeping person weighs more than 90 kg, then you need to use narrow slats, wide ones are suitable for people with less weight. Some manufacturers of bases also produce mattresses. It is recommended to choose mattresses and bases from the same manufacturer.

Additionally, you can get a discount on products.

Pay attention to completeness, legs are ordered separately from some manufacturers. To feel the full effect of an orthopedic mattress, you first buy a mattress, then a base under it. If you don't have enough money to buy suitable option, In many outlets you can get a loan, thereby you will make a long-term investment in your health.

An additional advantage of the orthopedic lattice is a quick repair.

Instead of a broken lamella, you can always order a product of the right size, buy it in a store. Many sellers offer their customers free shipping grounds- this is another nice bonus.Sellers and manufacturers who value their reputation always meet the needs of customers and exchange goods in the event of a manufacturing defect.

Remember: a high-quality, correctly made orthopedic base is the key to a healthy sleep.

VIDEO: Instructions for assembling a bed with an orthopedic base.

The bed is an indispensable furniture for the bedroom, consisting of several components. Usually, a base is attached to the frame, on which the mattress is placed. In models of the highest quality, each of the structural elements provides optimal and reliable support for the body. Proper weight distribution can significantly extend the life of the furniture, increasing the level of comfort.

The base of the bed - what is it and why is it necessary

The base for the bed is used as a bed support. Mistakes at the stage of selecting this furniture component will lead to a significant deterioration in the quality of sleep. The strength and durability of the entire structure will suffer even with an excellent orthopedic mattress.

When choosing a base, you should pay attention to:

Types of frame (solid or collapsible).
Sleeping dimensions. If the product is selected for a finished bed, the frame should be measured.
Availability of additional functions lifting mechanism, transformation system, equipment for vibromassage).
Mattress options. For example, for orthopedic products, you should buy bases on lamellas.
Materials for production. The type of wood or the thickness of the metal is taken into account.
Price. The price often depends on all of the above factors.

When it comes to an orthopedic base, you will have to study the size and number of lamellae. Even a cheap model can provide optimal conditions for sleeping, but for this you will have to choose the right mattress. In order to improve the anatomical properties and increase the wear resistance of furniture, you will have to carefully study the device, dimensions and equipment. various types grounds.

How the base of the bed is arranged, what it consists of

The base of the bed in most cases is made of metal and wood, including wood-polymer composites (chipboard). The typical width of the canvas for a double bed is from 140 to 200 cm, the length is limited to 200-220 cm. A single bed has a size of 70 to 90 cm in width and 200 cm in length. In the production of children's furniture, bases are used that do not exceed 70x180 cm. If the dimensions and shape of the bed go beyond the standard values, the furniture is made to order.

Structural elements of the base:

A solid canvas, which consists of sheets of plywood or fitted wooden boards.
Lattice for an orthopedic mattress, consisting of slats of various widths.

Additionally used various systems mounts. The rack base is much more complicated in terms of configuration. It is made of slightly concave slats placed at a short distance. These wooden crafts, allowing you to create an ideal platform for placing an orthopedic mattress, are called lamellas or latoflexes.

Structural features of the orthopedic base:

The frame is made of metal and wood. Frame made of MDF with reinforcement in zones to accommodate the mattress. You can use natural or artificial leather as upholstery for the headboard. Metal frame made of round pipes or square section with a diameter of 15 mm or more, it is resistant to damage and has a modern appearance.
Wide (from 5 to 12 mm) or narrow (3-4 mm) lamellas made of glued wood are attached to the frame at a distance of 5-7 mm from each other.
Latoholders (fasteners) are made of rubber, plastic or metal. They allow you to securely attach the slats to the frame, providing a decent level of cushioning. Rigid fixation is prohibited, each rail should bend a little. This will enhance the orthopedic properties of the bed.
Plastic overlays on a lath for increase in level of rigidity. This component is only supplied with expensive bed models.

On average, 15 lamellas are enough to create a high-quality rack base. Manufacturers recommend beech products, as their strength level is much higher than that of cheap birch plywood counterparts. The rigidity of the bed depends on the distance at which the lamellas are placed.

Which is better to choose a base for a bed - types

Bases can be classified according to three main parameters, since structural features, dimensions and materials for production are taken into account. Types of bed base are globally divided into solid and orthopedic (rack).

The solid construction significantly loses to the orthopedic base in terms of comfort and wear resistance. A plywood sheet can break if the load is exceeded, and the rigid fixation of the boards will not allow you to use all the features of an orthopedic mattress to the maximum. Over time, the surface deforms, and its individual elements not suitable for replacement and repair.

Advantages of a solid base:

Low cost due to simplicity of design.
The solid construction is suitable for use with any type of mattress, although orthopedic products in this case partially lose their anatomical properties.
Smooth and hard surface useful for the treatment and prevention of certain diseases of the spine.

Choosing a bed base with an orthopedic design is recommended for lovers of comfortable and healthy sleep. The slats will significantly increase the shock-absorbing properties of the bed. To extend the life of the mattress, you will have to turn it over regularly, as it gradually sags during active use. The slats and fasteners also lose their elasticity, therefore, if necessary, the slats and clamps should be replaced.

Advantages of the orthopedic base:

Allows you to establish excellent air circulation, thereby increasing the hygiene of the bed.
Ensures proper weight distribution.
Extends the service life and increases the orthopedic effect of the mattress.
Has a flexible design. The bed frame can be extended for an extra bed.

Orthopedic bases are used in production compact furniture, so they can save a lot of space. How to choose a base for a bed will be told by professionals who will advise you to pay attention to materials and technologies for the production of this furniture component. Among the innovative models of the bed, you can find slatted bases with a vertical or horizontal lift. Transformation systems allow you to chip off and lay out a berth.

Materials for production:

A wooden base on rails, the main advantages of which will be low cost and environmental friendliness.
Plastic spring design with remote control remote control. Provides regulation of position of a berth. Service life exceeds 15 years. Plastic products are durable and easy to use.
Metal rack, solid or mesh base. Regardless of the type of construction, it is distinguished by durability (service life exceeds 25 years), optimal orthopedic properties and relatively low cost.

Wood is inferior to metal and plastic in durability, but provides excellent air circulation. The metal base is extremely rigid and takes a lot of time and effort to assemble.

What to Consider When Choosing a Bed Base

The buyer decides which base to choose for the bed, but first you have to take into account the type of mattress. Complete with any type of orthopedic products, rack structures on lamellas should be used, while a solid base is suitable for other types of mattresses.

Selection rules:

The width of the base (the length of the rails) should be 4 cm higher than the analogous parameter of the mattress.
In the case of using dependent spring block the distance between the thick rails should not exceed the diameter of the spring itself.
To complete the design with wide slats, it is worth using springless mattresses or models with dependent springs.
The bases with the transformation mode are not intended for a complete set with coconut coir mattresses. Bending the bed will deform the filler.

Furniture manufacturers often indicate recommendations for choosing a mattress in their operating instructions. You should listen to the opinion of professionals. For example, soft polyurethane foam products and thin mattresses can be used on solid bases. For transforming beds, a springless mattress with soft fillers is suitable.

Cozy, comfortable and healthy sleep will provide a properly designed bed. The quality of rest largely depends on the parameters of the bed, including its base. You should carefully study the interior of the room, offers from manufacturers, recommendations from orthopedists and personal preferences. Purchase right foundation provide comfort during sleep.

Video

broke down cross rail at the bottom of the bed? In our Latoflex.ru store you can buy durable orthopedic slats(slats) for beds and armchairs individually and as a set. In a warehouse in Moscow, there are always separate wooden slats(stiffening ribs) with a thickness of 6 mm to 12 mm, a length of up to 1320 mm and a width of 38 to 83 mm. All products of domestic production, therefore, are inexpensive, made of durable birch veneer, latoflex is covered with heat-treated glue, beech stiffeners are also available.

CHOOSE QUALITY LATOFLEX!

H OUR PATTERNS OF THE BEST QUALITY (1 GRADE WITHOUT KNOTS, DEFECTS, SMOOTH GLOSSY SURFACE), MEET EUROPEAN QUALITY STANDARDS, ARE IN DEMAND NOT ONLY IN OUR COUNTRY BUT ALSO ARE EXPORTED ABROAD.

The required size of the lamella to order

You didn't find the right lamella size in our catalog? Let's make slats for the basis of a bed in the necessary size, in any quantity.

Bed slats small38x8 , the maximum possible length 890 (mm), suitable for furniture manufacturers: DREAMLAND, IKEA, HOF, and others.

Available sizes (mm):

38х8х710	38х8х715
38x8x750	38x8x755
38x8x790	38х8х795
38x8x800	38x8x800
38x8x830	38x8x835
38x8x850	38x8x855
38x8x860	38x8x865
38x8x890	38x8x895
38х8х910

Material: birch veneer

Manufacturer: Russia

Bending radius: 4500 mm

Price 1 piece - 80 rubles

Small bed slats, 50 mm wide and 8 mm thick, maximum possible length 990 mm

Available sizes (mm):

50x8x530	50x8x535
50x8x540	50x8x545
50x8x590	50x8x595
50x8x610	50х8х615
50x8x630	50x8x635
50x8x680	50x8x685
50x8x690	50x8x695
50x8x720	50x8x725
50x8x730	50x8x735
50x8x750	50x8x755
50x8x770	50x8x775
50x8x780	50x8x785
50x8x790	50x8x795
50x8x800	50x8x805
50x8x850	50x8x855
50x8x860	50x8x865
50x8x880	50x8x885
50x8x890

Material: birch veneer

Manufacturer: Russia

Bending radius: 4500 mm

Price 1 piece - 90 rubles

Bed slats, small width 53 mm and thickness 8 mm, maximum possible length 990 mm

Available dimensions (mm) slats for beds and sofas "IKEA", "Leroy Merlin", "SHATURAMEBEL", "HOFF", "STOLPLIT", "ASKONA", "ORMATEK", "TORIS", Dimax and others.

53x8x530	53x8x535
53х8х540	53х8х545
53x8x590	53х8х595
53х8х600	53х8х605
53х8х610	53х8х615
53х8х630	53x8x635
53х8х660	53х8х665
53х8х670	53х8х675
53х8х680	53х8х685
53х8х690	53х8х695
53х8х700	53х8х705
53х8х710	53х8х715
53х8х720	53х8х725
53х8х730	53х8х735
53х8х750	53х8х755
53x8x760	53х8х765
53х8х770	53х8х775
53х8х780	53х8х785
53х8х790	53х8х795
53х8х800	53х8х805
53х8х830	53х8х835
53х8х850	53х8х855
53x8x860	53х8х865
53х8х880	53х8х885
53х8х890	53х8х895
53х8х910	53х8х915
53х8х990

Material: birch veneer

Manufacturer: Russia

Bending radius: 4500 mm

Price 1 piece - 90 rubles

The slats are medium, 63 mm wide and 8 mm thick, maximum possible length910 mm

Rails available for beds and sofas from manufacturers: "Sonya", "Righton", "Borovichi", "Perrino", "City", "Relax", "Factory March 8" and other manufacturers of upholstered furniture.

63x8x530	63х8х535
63x8x590	63х8х595
63х8х620	63х8х625
63x8x630	63х8х635
63х8х640	63х8х645
63х8х650	63х8х655
63х8х660	63х8х665
63х8х680	63х8х685
63х8х690	63х8х695
63х8х700	63х8х705
63x8x720	63х8х725
63x8x740	63х8х745
63х8х750	63х8х755
63x8x760	63x8x765
63x8x780	63x8x785
63х8х790	63х8х795
63х8х800	63х8х805
63х8х850	63х8х855
63x8x860	63x8x865
63х8х870	63х8х875
63х8х880	63х8х885
63x8x890	63х8х895
63x8x900	63х8х905
63х8х910

Material: birch veneer

Manufacturer: Russia

Bending radius: 4500 mm

Price 1 piece - 100 rub.

slats big, width 63 mm and thickness 12 mm, maximum possible length 1320 mm.

(Usually used in French Clamshell movements)

Available sizes:

63x12x610	63x12x615
63x12x630	63x12x635
63x12x720	63x12x725
63x12x790	63x12x795
63x12x800	63x12x805
63x12x820	63x12x825
63x12x890	63x12x895
63x12x900	63x12x905
63x12x910	63x12x915
63x12x1320

Material: birch veneer

Manufacturer: Russia

Bending radius: 8000 mm

Price for 1 piece - 180 rubles.

The slats are wide width 83 mm and thickness 8 mm, maximum possible length 1320 mm.

Available sizes:

83х8х510	83х8х515
83х8х540	83х8х545
83х8х630	83х8х635
83х8х670	83х8х675
83х8х690	83х8х695
83х8х720	83х8х725
83х8х820	83х8х825
83х8х850	83х8х855
83х8х890	83х8х895
83х8х910	83х8х915
83х8х1320

Material: birch veneer

Manufacturer: Russia

Bending radius: 8000 mm

Price for 1 piece - 160 rubles.

Didn't you find the required rail size in our catalog? Let's make slats for a bed framework in the necessary size, in any quantity.

Lamella for French folding bed

In our store you can buy wooden slats for "French" folding beds, both individually and in a set.

French folding bed - This is a sofa that transforms into a large comfortable bed with a special transformation mechanism (Mixotoil). This type of upholstered furniture is not suitable for frequent use, it is used in cases where there are few beds in the house, but you still need to arrange guests with amenities. The method of transformation from a sofa to a bed is as follows: lifting three sections, hinged together, onto themselves. The main disadvantage of such furniture is a large number of hinges and compactness of the frame, with frequent use of such a product, frame deflection and wear of the transformation mechanism are possible. This can be solved by replacing the standard awning or mesh with durable orthopedic lamellas (“Bent glued boards”). Also, a worn-out transformation mechanism can be replaced with a new one.

Choose high quality

All raw materials for the production of molded products are purchased from reliable suppliers who always meet high quality standards. Thanks to the constant modernization of the woodworking equipment fleet and the use of innovative technologies we provide consistently high quality final product. The slats of our production are made of durable birch veneer and beech, have aoptimal bending radius R 4000-8000 mm, pare produced in all standard sizes, Pcovered not with a colorless varnish, as many write, but covered with glue with heat treatment.

How to measure a lamella?

To determine the dimensions of the lamella (curved glued board), you can use a ruler or tape measure by attaching a tool as shown in the figure. Special accuracy in measurements is not required, since all lato-holders have a gap of 3 to 5 mm.

Konkovo
SWAD St. Profsoyuznaya, 109
TC "Seventy-seventh"
(2nd floor)
Daily from 10.00 to 20.00

Volgogradsky prospect
SEAD Volgogradsky pr-t, 32 k. 8
TC "Technohall"
(ground floor)
Daily from 10.00 to 20.00