DIY armchair - a simple step-by-step instruction from design to design (115 photos). How to make a simple chair out of boards How to make an upholstered chair with your own hands

Frameless furniture on Russian markets appeared quite recently. But thanks to its many benefits, it quickly became popular. But the price of such a novelty is often too high.

In the meantime, making an easy chair with your own hands is not difficult at all. Such work will not take you much time. And to tailoring and decorating such original decoration your room can attract children.

Preparatory stages

Before you start, prepare detailed drawing. If you do not carefully calculate all required dimensions, then you may not get the result you expected.

The easiest way is to make an easy chair in the form of a pear or an ordinary bag.

Figure 1. An example of a drawing of a simple chair.

But you can give it the shape of a pyramid or, for example, a cube. Often, ottomans are made for children's rooms in the form of a drop or a funny animal, for example, a dragon.

An example of a drawing of a chair of a rather simple form is shown in fig. 1. Naturally, you can change the dimensions given in it as you wish.

Next, choose a fabric. You will need two types of matter. For the inner cover, get a fairly thick fabric with a tight weave. Otherwise, the filler balls may eventually come out of the bag. For this purpose, satin, coarse calico, a fabric intended for sewing breastplates are well suited.

But the outer cover can be sewn from any material. Denim, artificial leather, fur or furniture velor will look good in any interior. The color of the material depends only on your taste, preferences and appearance rooms.

In order to, you need to buy a special filler. Usually frameless furniture stuffed with polystyrene foam. It can be purchased at stores that sell furniture repair products.

Be careful when buying this product remotely (for example, from a catalog or via the Internet). This filler is very light and voluminous. To transport 10 kg of "balls" you will need a cargo gazelle, because in a normal a car he won't get in. When buying a filler, pay attention not to the weight, but to the volume of the package. For tailoring an easy chair, you need a bag with a volume of 200-250 liters.

If desired, polystyrene foam can be replaced with foam chips. It can be obtained by crushing, for example, decorative tiles used for finishing the ceiling.

Some experts advise stuffing frameless furniture with hay or buckwheat husks. But, using natural materials, remember that they should be changed about 1 time in 5-6 months. Fillers plant origin they absorb moisture well, because of which mold fungi can start in them. In addition, such materials are quickly compressed, and the easy chair will lose its volume and elasticity.

Back to index

Sewing a frameless version

In order to make an easy chair of the dimensions indicated in the drawing, you will need the following materials:

• fabric for the inner cover (with a width of 150 cm) - 3 m;
• fabric for the outer cover (with a width of 150 cm) - 3 m;
• zipper, 22 cm long;
• sewing threads;
• decoration materials (piping, braid, ribbons, inlays).

Start by cutting out all the necessary details. Don't forget to leave seam allowances! They should be 1.5-3 cm.

First you need to prepare the patterns for all the elements of the easy chair. They are usually made from paper or polyethylene film(if you want to make patterns that are reusable). When creating patterns, allowances do not need to be taken into account.

The finished pattern is placed on the wrong side of the fabric and circled around the office with chalk or a bar of soap. Between the details of the pattern leave a space equal to the allowances. If you provide the same allowances for all parts, then the elements can not be marked separately. It is enough to fold the fabric in several layers and circle the pattern 1 time.

Tailoring should begin with the manufacture of the inner cover. “Petals” are sewn to the bottom in turn. The sides are then sewn together. long parts. Leave a hole in one seam for stuffing. The top part is sewn on last.

Next, make a cover. It is done in the same way, only a zipper is inserted into one of the seams. To do this, the seam is sewn from below, to a length of 3-5 cm. Then a pass is made equal to the length of the zipper and stitched to the end. The parts sewn in this way are turned right side out, and the allowances for the fastener are folded over and ironed. Lightning is placed under the workpiece from the inside and pinned to the allowances with pins. First, a line is laid on one side, trying to place it as close as possible to the teeth (usually special paws are used for this). sewing machines), then on the other. The fastener is finished by laying double seams at the beginning and end of the zipper.

Additional decor will make the chair a unique detail of your room. It can be decorated with embroidery, appliqués, decorative braid. This finish depends only on your personal taste.

The idea of ​​making a baby easy chair with your own hands has a number of advantages. The main one is the opportunity to save money. homemade furniture costs several times cheaper than purchased products. At self-manufacturing interior items can be selected optimal design, size and color of the final product.

Similar articles:

Children's room

The room for the child should be spacious enough for games, placement of cabinets, a table and chair, toys and other accessories. And most importantly - a comfortable and functional place to relax. Installing a bed is not always justified, especially in small rooms. Frame products also do not always meet safety aspects. In such cases, parents think about how to make a baby bed that can be transformed into a chair. This is a feasible task that can be solved without the involvement of specialists.

Thanks to creativity can be made safe upholstered furniture which the child will be able to independently move, disassemble and assemble.

Frameless chair that can change shape

Such products are several pillows fastened together. These elements of the interior have many advantages.

They are as follows:

1. A light weight. For the manufacture of transforming furniture, timber, plywood and heavy pressed boards are not used. The chair is effortlessly rearranged to a new place when the need arises.
2. Security. Accessory does not have hard surfaces and sharp corners that children can hit. In the unfolded state, the height of the soft part above the floor does not exceed 20 cm - the fall of the child in a dream will not cause him any discomfort.
3. Presentability. Properly made and tastefully decorated furniture looks beautiful and representative, organically fitting into the interior.

A folding chair without a frame is easy to maintain and repair. It is easily disassembled into component parts that can be quickly replaced or upgraded.

What will be required

Before starting work, it will be necessary to conduct a survey of the premises and draw up diagrams. It is necessary to measure the size of free niches and the area that can be occupied by furniture. If you make several identical items, then you can assemble a sofa or a corner for the family or friends of the child to spend time together.

To do Baby chair with your own hands, you will need to accurately calculate the need for materials. It is advisable not to save on fabric and make all the pillows the same color on both sides. So the furniture will look much better when unfolded.

You can calculate the pattern of a frameless chair using paper copies of each pillow and ottoman on a scale. The cut rectangles are superimposed on the fabric roll strip layout so that there is less waste. Separately, it is advisable to add a supply of matter to the calculations for replacement in case of damage to the product.

To make a chair with your own hands, you need the following materials:

• foam rubber slabs 10 cm thick;
• upholstery fabric;
• inexpensive chintz;
• braid 2 cm and 5 cm wide;
• threads;
• detachable zippers;
• decor elements;
• synthetic glue.

Tools needed to make the chair:

• sewing machine;
• tailor's meter;
• roulette;
• scissors;
• stationery knife;
• marker or pencil.

Since the foam rubber will have to be cut with a sharp knife, then flooring during operation it is recommended to protect. For this, plywood or a piece of old linoleum is used.

Sewing order

For the manufacture of upholstered folding furniture, it is necessary to have an adequate supply of needles and threads.

Sewing covers is performed in the following sequence:

1. A strip of matter spreads on the floor. If possible, it is better to fix it tightly in the corners in a taut state.
2. Patterns are transferred to the fabric. It is advisable to place the templates on the same line in order to obtain several blanks with one cut. Pattern details are clearly visible. The part is marked on the reverse side.
3. The markup is checked for correctness. After that, the matter is cut with scissors. The excess is removed, and the blanks are stacked.
4. The edges of the blanks are finished with an overlock. The covers are sewn together, zippers and wide braid are attached to them.

To reinforce the edges of cushions and give correct form, at the corners of the covers, sew a narrow braid.

Similarly, a bean bag chair is sewn with your own hands. Since it has rounded shapes, the seams with braid can not be reinforced.

Backfill filler

For a product in the form of a pear, an inner cover is made of dense fabric. It is necessary to hold small fragments and dust. As a filler, you can use foam, polyethylene or polyvinyl chloride balls. All these materials are environmentally friendly and are sold in the construction markets.

To fill the cover, 0.3-0.5 m³ of material is required. To accurately calculate the need, you need to multiply half the length of the rounded part by the width and depth of the base. It is recommended to purchase balls with a margin of 20-30% in order to add them to the case as the filler shrinks. Backfilling is carried out with the help of a scoop, the completeness is determined empirically. The child is the recipient of the job. After filling the inner tank, it is fastened with a zipper, and an outer cover is pulled over it.

Child seat made from improvised materials

Making chairs and chairs from foam rubber, polyurethane foam and mattresses is a great and profitable way to recycle old things. Old beds, wardrobes and sofas are used as starting materials. Their components go to blanks for frames, sidewalls, armrests and niches for things.

Tools and materials

To make folding upholstered furniture, you will need:

• roulette;
• hacksaw;
• square;
• electric drill;
• screwdrivers;
• spanners;
• sandpaper;
• PVA glue;
• sewing machine;
• ruler;
• marker.

If a sofa is being dismantled, then a folding mechanism, corners, bolts and nuts are used in the work.

What do you do with old furniture?

All children deserve a cozy place they can call "their own", whether it's for lounging, watching cartoons or reading. Even something as small as a comfortable seat can be one.

And while you can choose absolutely any chair in the store, wouldn't you like to make it as unique as your child? Try to make a baby easy chair yourself.

By building something with your own hands, you will get exactly what you would like, as well as save money.

by the most simple option there will be a pear chair, or a bean bag chair. Simplicity, perhaps, lies in the fact that this model is frameless.

Some online tutorial videos can be intimidating in their complexity. But don't worry. Two pieces of fabric, a zipper, a little machine stitching with straight stitches - and a charming baby bean bag is ready.

Necessary materials:

• two pieces of fabric (upholstery fabric is preferred - it is more durable);
• zipper 60 cm long;
• filler (the amount will depend on the type of material).

For seam allowances, leave 1.5-2 cm.

Working process:

1. Cut out two pieces of fabric 107 × 82 cm. The cuts can be identical or different colors.
2. Fold the fabric right sides. Sew the long raw edges with a zigzag stitch. This is how you prevent wear. Then sew the same edges with a straight seam. It is advisable to use short length stitch, which will also give density to the product.
3. Fold the fabric in half (horizontally).
4. Starting from the folded side, round off the ends by trimming about 15 centimeters from the corner.
5. Turn the fabric right side out. It turned out a symmetrical rounded bend on one side. You have a rough edge again. Work it with a zigzag stitch, and then sew with a straight line.
6. Open the raw edge. Fold the right sides together, but now in such a way that the seam between the two pieces of fabric faces up.
7. Sew the zipper into the hole. You can use invisible lightning, it will be almost invisible.
8. Close the edge of the fastener with straight stitches on both sides.
9. Turn the finished cover right side out and fill with filler.

Frame chair

What does it consist of:

• chipboard;
• plywood;
• foam rubber;
• special glue;
• upholstery fabric.

Instruments:

• self-tapping screws.

Working process:

1. Cut the chipboard sheets in a semicircle - this is your basis. Using self-tapping screws, attach three bars (40 cm each) at an angle of 90 °.
2. From plywood, cut out the front pillars. Their width should be half the length of the semicircular part. The length is equal to the length of the bars.
3. Attach all parts to the bars with a drill and self-tapping screws.
4. Attach foam rubber to the frame.
5. Sheathe the finished fittings with a cloth.

For covering, you can also use a leather substitute, which is very convenient for children's furniture. This upholstery is easy to care for.

Wheelchair from tires

A great idea on how to put into use the plywood scraps and worn tires left after the repair.

What you need:

• 2 tires;
• plywood;
• foam rubber;
• upholstery fabric.

Instruments:

• self-tapping screws;
• furniture stapler.

Working process:

1. Install tires one by one.
2. Fasten together with large self-tapping screws.
3. Be sure to cover the bottom tire with felt so as not to damage the floor in the future.
4. Make a plywood back. Give it the desired shape. Also attach it with screws.
5. Choose a denser foam for the inside of the seat. Cut out the circle and fill the tire with it. Then cut out a larger circle to cover the top of the seat. You can use thinner foam.
6. Sheathe the back with foam rubber using a furniture stapler.
7. Cover the chair with upholstery fabric.

Instead of upholstery, you can sew a cute quilted cover. The child will appreciate!

Unfortunately, sometimes it is difficult to navigate the size and quantity of materials if you use leftovers. Try to create your own unique model.

First, evaluate your resources: what materials and tools do you have at your disposal? Is there enough? Get down to drawings! Don't worry if the materials available to you are a bit out of the ordinary. By connecting imagination and enthusiasm, a chair for a child can be made from anything.

What is upholstered children's furniture made of? Yes from everything:

• Styrofoam;
• thick cardboard;
• old furniture pillows;
• foam rubber without the use of a frame;
• remnants of laminate or parquet;
• mounting foam;
• plastic bottles and more.

Involve your child - he will give you a thousand ideas. Make your chair soft and comfortable. Choose from fun prints that you think fit with your loved one's personality. little man. This will be an unforgettable gift not only for the holiday, but just like that.

There are no related posts.

Using a chair-bed instead of full-fledged individual items furniture relevant for small spaces. Successful combination places for sitting and sleeping allows you to ergonomically organize the space of the room.

Search for options for arranging space small apartment often leads to the idea of ​​buying a folding chair.

Buying such a thing can be disadvantageous. But you can make furniture yourself, if you have the skill. How to make a chair bed , know many who equip their apartments and houses with handmade items.

Advantages of self-production furniture - a bunch of. First, the main, which are used, can be found at home or in the country, as well as bought in specialized stores at a price incomparably lower than the finished item.

Blanks made of wood or its derivatives, filler and fabric - that's what you need, not counting various types fasteners.

To make a chair bed with your own hands , you will spend 2-3 times less money. In addition, you can choose the design yourself designs , coating material and color scheme.

All this allows you to create an original model that is convenient for your home.

Deciding on design and construction

Chair-beds are divided into two main types:

• Frame;
• Frameless.

Intraspecific differences furniture vary based on the choice of forms and the transformation mechanism.

Traditional materials of execution make it a reliable tool for many years.

It is more difficult to make a wireframe model. Furniture with a rigid base is complemented by a layout mechanism, which must be done correctly so that the “liner” can be easily removed and straightened without distortions. A design with two folding legs is easier to make than with four.

You can choose both a wooden base of supports and a metal one.

Define one or the other suitable design is necessary not only based on the complexity of creation, but also on its style, safety and convenience for recreation. For reclining chair you can choose theselike chipboard, plywood, the cloth a certain density, foam rubber for upholstery, if a frame option is expected.

This furniture is compact and ergonomic, its dimensions are noticeably smaller than a standard bed, but it is not inferior to it in terms of comfort.

A product without a rigid base may have a streamlined shape, in addition, it is lighter in weight.

Whatever designs you choose, they must be strong and safe.

Do not forget about convenience - the body should be comfortable during sleep or daytime rest.Remember that the base must be wide enough - at least 60 cm, otherwise the sleeper will not turn around on the bed.

Today there are many varieties of this furniture. All of them find their place in the interior of the apartment.

Necessary materials

To make a wireframe model, you will need the following::

• Chipboard;
• fiberboard;
• Wooden bars;
• Plywood;
• Foam rubber;
• self-tapping screws;
• hinges;
• PVA glue;
• Sandpaper;
• Upholstery fabric.

We will make a simple but comfortable thing in everyday life, which will be strong and reliable to withstand any unexpected guest.

In building a structure others can be used. For upholstery, it is better to choose a special the cloth , differing in density and well giving in to cleaning.

For frameless furniture used:

• Matter for covers;
• Foam rubber;
• Strong threads.

Upholstery will need high-quality foam rubber.

Required Tools

So that the intended subject furniture to do it right and firmly, you will need:

• Long ruler or tape measure;
• Simple pencil;
• Staples and construction stapler;
• Scissors;
• Hacksaw;
• Screwdriver;
• Sewing machine (for making a frameless chair).

Tools for work.

If in the design decor is provided (for example, in the form of applications), then a stencil cut from a dense file folder will come in handy.

Manufacturing process: step by step instructions

Before starting work, it is imperative to complete a drawing of the product, which will indicate exact dimensions and detailed parts of the model.

Product drawing.

For the manufacture of folding chair frame type you will need a lot of space. Choose a spacious room.

First we make the body:

Then we start creating the folding part. Make 2 frames of bars along the width and length of the seat. Attach sheets of plywood to them.

Connect the frames with long loops.

In order for the chair to unfold evenly, use the metal transformation mechanism - attach steel contours with through loops on the sides.

The main thing in business is how to make a bed chair yourself, so that the parts folded together make up a beautiful and even square.

Such a cute armchair bed, which we made with our own hands, can be painted, varnished or upholstered with foam rubber and stylish beautiful fabric.

The next step will be plating:

1. Glue cut-to-size pieces of foam rubber 2-3 cm high to the top of the frame.
2. Lay the fabric flat and using a stapler, attach it to the bars at the bottom.
3. The sides can also be upholstered with a thin layer of foam rubber.

For folding design need legs.

They are made in the middle and front of the frame, flush with the bottom point of the bottom or slightly higher. For armrests, use stripped sandpaper wide bars.

The seat easily unfolds without clinging to the sidewalls, and just as quickly turns into a chair.

The frameless model is much easier to manufacture. It needs foam rubber, which can be used in 2-3 layers, and dense fabric like a "raincoat fabric" (or less slippery). The cut material is stitched from several sides. the remaining opening is designed to be placed inside the foam rubber.

To prepare the chair-bed for sleeping, you should unfasten the straps, then pull the top cushion towards you.

Equip the unsewn section with a “zipper”. For a more practical use of the frameless sample, make an outer case.

Since it does not have a rigid base, the back should be placed against the wall

Chair-bed decoration

In order to give the finished product a stylish and original look, use fantasy.

The design of the created thing can be improved by using interesting prints, applications.

Of the fabrics used for decoration, tapestries look good. If you want to make the upholstery softer to the touch, choosewith pile like faux velvet.

This material is also stronger and more durable.

Applications are best sewn on before the upholstery process. To keep them neat, prepare stencils and shreds in advance different color matched to match or contrast with the main gamut.

In a folding frame-type chair, the front legs, which are not retractable for all models, can be made carved or metal.

To prevent the surface from gathering dust and rubbing, use a cape or sew a special cover. Suitable and carpet of the appropriate size, and faux fur - this will make the placement in the chair more comfortable, cozy. Another option is to sew interchangeable covers from a light fabric.

This will make it easier to take care of the upholstery.

VIDEO: Armchair bed with your own hands.

The vast majority of soft chairs can be divided into frame and frameless. Child seats stand apart, the manufacture of which has a number of technological differences. The question arises - is it necessary to pay big money for ready product, if you can do something similar with your own hands?

We will tell you about the process of manufacturing soft chairs, provide drawings, photographs and videos that will allow you to successfully cope with the task. You will also find a list necessary materials and tools.

First of all, you need to decide on the material of the upholstery. There are significant differences in both the cost of upholstery and its physical properties. Consider the most popular options:

• Velours. Velvety and fleecy fabric. Looks like faux fur.
• Chenille. natural material, "diluted" with synthetic fibers. Thanks to this, the surface does not roll, it is practical and durable.
• Flock. The fabric vaguely resembles velor, but experts recommend using flock for the manufacture of child seats. The fabric is easy to clean and wash, has water-repellent and wear-resistant qualities, does not fade.
• Jacquard. The fabric is easy to clean and highly durable, but the structure includes synthetic fibers. Therefore, loose loops can lead to puffs.
• Faux suede. The material is fleecy and durable, does not fade and can "breathe". Ease of maintenance is an added bonus.
• Artificial leather. The material is characterized by high wear resistance. In this case, the skin is distinguished by the presence of embossing.
• Tapestry. This is a natural and very expensive fabric, which can be distinguished by visible weaving. Multi-colored threads, woven into the overall structure, form beautiful patterns.

At the heart of the most primitive frame structures lies a plywood template. Therefore, you will need sheets of birch plywood, self-tapping screws, nails and a standard set of tools.:

In the case of the manufacture of a bean bag, your toolkit will be thoroughly reduced. In addition, there are simplified technologies developed craftsmen, which allow you to assemble an easy chair quickly and with minimum set inventory.

DIY soft chair photo

Any work cannot be started without a clear plan of action. Decide on the design of the future piece of furniture. Creating a frame chair is more difficult, but it looks more respectable.

If you decide to sew a bean bag chair, get ready to master the patterns. Your actions will lie not so much in the sphere furniture production how much in the field of sewing art. In any scenario, you will need an approximate budget and an idea of ​​\u200b\u200bthe consumption of materials. For example, a bean bag chair costs 1200-1300 rubles. This includes fabric for the outer (about 300-500) and inner (200-300) covers. Also, 500 rubles are laid for the purchase of a filler.

Perhaps you already have an old "grandfather's" easy chair that has lost marketable condition? Then you can drag and repair it with your own hands, as shown in the following video:

An ordinary chair requires a thorough approach and extensive preparatory phase. Consider the list of materials and tools required for the manufacture of a plywood chair with upholstery:

• 20mm plywood;
• electric drill;
• emery skin;
• screws;
• jigsaw;
• metal rims;
• thin nails;
• foam rubber;
• wood glue;
• artificial leather;
• stain;
• black glossy paint;
• pencil;
• masking tape;
• roulette.

Let's get to work:

1. After downloading one of the drawings below, proceed to large-scale work. Calculate the amount of materials and start making a template. First, cardboard templates are made, pieces of plywood are cut out from them.
2. The side parts of a standard chair resemble a banana. You will also need cross bars. Decide on the angles of inclination, bending and dimensions of the product.
3. Surface wooden parts cleaned and polished. Special attention give the ends - soak them with heated drying oil, flatten the fibers with a hammer (if bends are provided). Each part of the frame is cut with a jigsaw.
4. The side parts of the chairs are painted or stained. The ends of the sidewalls are reinforced with metal rims. After that, the wrapping process begins.
5. Electric drill is done required holes. The rims are fixed with screws. First, the back of the back is trimmed with artificial leather, then it is the turn of other fragments of the chair.
6. To secure the fabric, you will need wallpaper nails with large hats. At the back, the upholstery is fixed along the transverse parts (along the very edge), in front it should cover the slats. It is better to process the attachment points with carpentry glue - this will increase the level of reliability.