What to do if indoor anthurium does not bloom for a long time? Growing anthuriums with lush and long flowering.

The name "anthurium" is translated as "flower tail". This name was given because of the original structure of the flower, which is a flower cob and a bract. It looks very beautiful, stylish, unusual, only flowers when breeding a house, this chic tropical plant rarely pleases amateur florists. But why does the anthurium not bloom? How can the situation be changed?

There can be many reasons for this. This child of the tropics is distinguished by finicky, capricious disposition, the conditions of the apartment are not always to his liking, he may not like the water for irrigation, the soil. Even the size of the pot is important.

Soil selection

You can not plant a plant in ordinary soil, the plant will not be able to get used to it, even if you provide care, regularly feed it. Perhaps the leaves will not turn yellow, grow, develop normally, but refuse to bloom. The most optimal solution would be to purchase a land mixture for orchids, which consists of:

• tree bark;
• coal;
• peat;
• sphagnum.

To this land still needs to be added:

• leaf humus;
• perlite;
• a little high-moor peat (if the peat is low-lying, then you can not count on flowering).

Such a mixture will be “tasty” for a tropical exotic because in nature it grows on a mixture of the remains of overripe wood and leaves. Weak roots always receive good ventilation, are in conditions of humidity.

flower pot size

The reason for the refusal to bloom can be wrong size flowerpot. IN natural environment of its habitat, it grows as a saprophyte, often representing a liana, has a poorly developed root system, therefore, when growing at home, one must take into account: the smaller the capacity for planting, the greater the likelihood of flowering. Most likely after transplanting into a low wide container on a pallet with wet expanded clay or gravel.

Change the "place of residence" should be every 3-4 years. This fidget, unlike most of his fellows, loves transplants.

Proper watering

At home, anthurium is very picky about watering conditions, its soil should always be moist, but not damp, otherwise the tender roots may rot. Only soft water is suitable, and before use it must be defended and boiled.

Water, trying not to fall on the leaves, otherwise after that they will darken, the plant will look untidy. Leaves are best moistened with a spray bottle. You can overlay a flower with any moss, water it, providing required humidity soil, only aerial roots are best left in the air, regularly sprayed along with the leaves. In the spring, it is advisable to pour it once with soft boiled water at a temperature of 40-50 ° C. This can serve as an additional impetus for bookmarking inflorescences.

Heat and Light

Also, the reason for the reluctance of anthurium to bloom may be improper lighting, non-compliance temperature regime.

This gentle creation of the humid tropics requires a lot of bright light, but does not tolerate direct sunlight, burns may appear on its delicate leaves, they turn yellow. Requires diffused sunlight or artificial lighting. At home, northwestern, eastern windows are ideal for him.

No drafts - it can kill anthurium!

Anthurium is also picky about air temperature, about + 16 ° C in winter, up to + 28 ° C in summer. Go to winter mode necessary from September, gradually lowering the temperature. At correct mode around the second half of February, it will begin to form buds, after which it will become necessary permanent care behind the plant. At the first sign of the beginning of flowering, artificial lighting should be increased.

top dressing

Anthurium when grown at home needs additional nutrition. It can be fed:

• Applying diluted fertilizers to the soil. Do this once every two weeks, starting in the middle of winter. After the start of flowering, the amount of fertilizer should be reduced by half.
• Spray the leaves daily with a special foliar top dressing.

Care during flowering

All care recommendations are fulfilled, the first buds are tied on the plant, making the florist's heart beat joyfully in anticipation of the white, pink or red flowers finally blooming. Immediately guess about the duration of the flowering period. With proper care, anthurium is able to bloom year-round, only the flowers will be somewhat smaller than those that were at the time of purchase. The secret is simple: breeders achieve large flowers by using a growth stimulant, such as gibberellic acid.

Anthurium is a tropical plant, more suitable for growing in greenhouses or greenhouses at a certain humidity and temperature. Therefore, at home, waiting for its flowering is quite difficult. But if you properly care for the plant and create the necessary environment for it, then it will soon delight you with charming inflorescences. The duration of flowering can be several weeks, anthurium flowers persist for a long time even in a cut state.

Causes

Anthurium can release the first peduncle only by the end of the second year of life. If inflorescences are not formed, then the conditions for normal growth and development are violated. To understand what to do when the anthurium does not bloom for a long time at home, you need to figure out the reason for the delay in flowering. There are many factors due to which the plant does not form buds. The main ones are the size of the pot in which the flower is located, the soil in the pot, the level of light, temperature and humidity.

1. Of particular importance to good growth has a container in which the flower develops. Anthurium belongs to the family of epiphytes - plants that grow on the trunks and branches of trees and receive nutrients from environment. The roots of epiphytes are poorly developed, so the container with nutrient soil for a flower should be small. The less soil around the roots, the more actively the aerial part of the flower will develop. Bye root system does not completely occupy the entire volume of the soil under it, the aerial part of the plant will not develop.
2. Another reason why anthurium does not bloom is in the degree of illumination of the room. The plant should not be exposed to direct sunlight, although the place should be well lit. In nature, only diffused light enters the plant, which passes through the foliage of trees. If the flower pot is on south side rooms, lighting should be limited. When there is not enough light, backlighting with fluorescent lamps is necessary. IN winter time the flower should be lit for at least 9 hours a day, and in the summer - at least 12 hours.

1. Inflorescences usually begin to form at the anthurium in mid-February. During this period, temperature control is very important. The temperature in the room with the flower should be between 20-22˚С. When the air is cooled to 15˚С, the plant hibernates and stops growing, it is this regime that needs to be provided to it in winter.
2. Since the anthurium is a tropical plant, the humidity in the room where it is located should be quite high. After all, the epiphyte receives moisture and nutrition mainly through the leaves. You can maintain the level of humidity using special devices that humidify the air, or by daily plentiful spraying of the foliage. warm water. You can put a container with a plant on special pallets with grates, on the bottom of which water is poured.

Advice! Anthurium leaves 1-2 times a month can be washed under warm shower. At the same time, the foliage is not only perfectly moistened, but dust and possible pests are washed off from it.

1. Very important for normal flowering proper watering, stagnant water, as well as drying out of the soil, lead to the withering of the plant. In winter, anthurium is watered once a week, since it is in hibernation. In the warm season, watering is done every 3-4 days, taking into account soil moisture.
2. The soil for anthurium needs light, breathable, slightly acidic. The substrate should be renewed every spring, while ensuring good drainage.
3. In the room where the flowerpot stands, drafts or sudden temperature fluctuations should not be allowed.

Knowing what conditions are necessary for the successful flowering of a tropical handsome man, you can find out the reasons why he does not release buds and try to correct the mistakes.

What to do if the anthurium does not bloom for a long time

If the plant has a too large pot or, conversely, it is almost invisible due to the roots of the earth, then it needs to be transplanted. At the same time, it is necessary to take into account several nuances proper fit anthurium:

• A pot for growing anthurium should be chosen low flat, plastic is better, it should be changed no more than once every 3 years.
• When planting, the roots are buried no more than 4-5 cm, otherwise they may rot. In this case, the plant will not bloom. Therefore, when transplanting, make sure that the roots are not too deep.
• You can not cut the roots when transplanting. In order for them to fit entirely in the pot, you need to pick up suitable size and tank depth. Only rotten or dried areas can be removed.
• If there is no special substrate for epiphytes, you can prepare the soil yourself. Peat, expanded clay, pine bark, charcoal are mixed into the soil for azaleas or begonias.
• Anthurium at home prefers acidic soil, so it is advisable to add coniferous needles to the soil.
• To stimulate flowering and additional moisture after transplanting, it is recommended to wrap the stems at soil level with wet moss.

Make sure the anthurium gets enough light and heat. It's easy to find out. If the illumination is insufficient, only the leaves actively grow in the plant, but their color becomes pale. Try moving the flower to a sunny window sill, while shading part of the window. Place the pot close to the heaters to create a comfortable temperature. To stimulate development, constant heating of the surrounding air to 25˚С is necessary.

Important! If your anthurium has begun to bloom, be sure to cut off the inflorescences that begin to wither. If this is not done, seeds will begin to form and ripen on them, this greatly weakens the flowering plant and inhibits the further formation of buds.

Find out if the plant has enough moisture. With a lack of moisture, the tips of the leaves begin to dry out, they may form brown spots. For irrigation, water must be settled or passed through a filter. This is necessary in order to prevent liming of the soil, which is detrimental to the flower. You need to water the anthurium with warm water, and not even at room temperature, but heated to 30-35˚С.

It is best to do this in the morning so that the water has time to evaporate during the day. When spraying, make sure that large drops of water do not fall on the leaves. It is necessary to spray not only the leaves, but also the roots protruding from the ground.

If mold or green algae has appeared on the soil, then there is too much moisture. This can lead to root rot, in which case you need to remove upper layer soil, pour fresh soil and reduce watering.

Tip! If regular watering and spraying do not help, try to speed up flowering with a warm bath. To do this, pour into the pan hot water(temperature around 60˚C). Warm steam will create for anthurium comfortable temperature and humidity. Cooled water can be drained. You can arrange such a procedure every 7-10 days.

If everyone the necessary conditions are observed, but the buds are not formed, it is necessary to stimulate their formation with the help of top dressing. Start top dressing gradually from the middle of winter, at first use only half the usual amount of fertilizer for indoor plants. With the beginning of spring, top dressing is intensified. When choosing top dressing, it should be borne in mind that nitrogenous fertilizers stimulate the active growth of leaves, but inhibit flowering. It is better to choose top dressings with a high content of phosphorus.

This inflorescence-cob provided with more or less wide coverlet a wide variety of colors and shades - red, white, green, orange, purple.

Smells, exuded blooming anthuriums, are no less changeable: from subtle to very strong, from fragrant to fetid - it all depends on which pollinating insects are more common where specific view anthurium.

in the greenhouse and room culture most often grown beautifully blooming in white-pink-red tones Anthurium Andre And Anthurium Scherzer(including their numerous hybrid forms), as well as decorative leafy crystal anthurium with inconspicuous flowers that have a delicate pleasant aroma.

Anthurium juice is poisonous and should be handled with care.

How to make Anthurium bloom?

Indoor anthuriums potentially able to bloom from February to November, that is, practically all year round, pausing only during the coldest and darkest winter months; in addition, their flowers are unusually long-lived in the cut and remain unchanged for up to four weeks.

For such a fabulous flowering, these plants need relevant conditions which require considerable experience and knowledge.

The main problem is to find such balance of light, temperature, soil and humidity, which will remind the anthuriums of their native alpine rainforests and they, perhaps, will agree to live in your apartment.

Creating an appropriate microclimate includes provision illumination - bright, but diffused; quite long throughout the year.

Temperature regime

summer temperature must be maintained 20-25 degrees, winter- in the interval 16-18 degrees.

The soil temperature should not be lower than the air temperature, so anthuriums are planted in plastic containers. These containers should not be deep - but not too wide, otherwise the cultivation of roots and children will go, not flowers.

Air and soil

Air saturated with water vapor should be fresh - but without drafts.

The soil is wet- but not wet.

top dressing needed - but fertilizer solutions should not be too concentrated.

Compliance with all these “ifs” and “buts” is the main condition for the constantly blooming “male happiness”.

And finally, your anthurium has blossomed - but it's too early to calm down. After a while, bright red bedspreads turn green, or a rich pink variety turns white, losing color. This is normal, this is how these plants bloom - and obsolete flowers must be removed.

It also happens that you have acquired a luxurious variety with numerous large flowers - and at home it somehow thinned out, crushed and reluctantly forms new inflorescences.

This situation may arise due to the fact that in the commercial cultivation of anthuriums in greenhouses to improve presentation use gibberellins - phytohormones that accelerate growth and general development all parts of the plant.

How to care for a flower to bloom Male happiness?

Deprived of constant stimulation, the specimen gradually returns to its natural state and, if it is provided with the proper one, will bloom again - albeit not so brightly and plentifully.
Can Anthurium be transplanted during flowering?

During flowering, transplantation of anthuriums is excluded

During this period you need feed plants: once every two weeks, complex mineral fertilizer. You can alternate between organic and mineral supplements, but in any case, the concentration of the solutions should be weaker than the standard.

Anthuriums belong to the species, enough difficult in room culture. Sometimes this plant is given a separate "apartment" - a terrarium, in which, behind glass, they create a real tropical atmosphere for it, lighting up, regulating the temperature, saturating the air with water vapor. Anthuriums are also grown hydroponically.

However, these "Tropicans" may well grow without special shelters and tricks.

True, there are interruptions with flowering: the red bedspreads have turned green, you have removed the faded ones - and new flowers do not form, although winter is still far from the rest, judging by appearance the plant is doing well.

Sometimes a young specimen does not bloom or a transplanted anthurium grows, but does not bloom.

All these problems have their causes, which can be eliminated.

If you are waiting - do not wait for the flowering of a specimen grown from seeds, remember:

Anthurium blooms no earlier than a year and ten months, sometimes two years.

If you, as expected, in the interval between flowering, and not during it, transplanted the anthurium into a new, expanded container, it may turn out to be too wide and flowering will not begin until the container is filled with roots and children. Needs a small pot to bloom. You will find more information about planting and transplanting anthurium.

Why does Anthurium not bloom at home?
Check if everything terms proper care respected:

• The soil- should be suitable for epiphytes - plants with aerial roots: loose, fibrous, moisture and breathable, well drained, ideally - a special soil for orchids.
• Watering- provides a constantly wet, but not stagnant-damp state of the soil. The water is soft, its excess immediately drains from the pan.
• Air humidity– significantly increased: wet sphagnum on a pallet can be added to frequent spraying. Aerial roots are also covered with this moss.
• top dressing- twice a month, with a diluted solution of complex fertilizers.
• Temperature- in the flowering season, not lower than 22 degrees (stimulates the development of buds), in winter - from 16 to 18 degrees (stimulates the laying of buds).
• Lighting- bright and at the same time diffused: a western or eastern window, additional illumination with a short daylight hours.

If all these conditions are present, the anthurium is not too young, not busy growing roots and forming children - and still does not bloom, you can try it further stimulate.

To do this, in the spring water the plant with soft water with a temperature of 40-50 degrees.

Some once a week pour water heated to 60 degrees into the pan and leave it there until it cools, after which it is drained. The atmosphere of a warm steam room helps the anthurium finally awaken to a full-blooded life.

Abundant, regular, exotic flowering of anthurium can be considered a successfully passed exam for the title of a diligent and skillful florist, and the happiness that should cover all domestic men, apparently, is beyond description.

A photo

Next you will see a photo of how Anthurium fades:

IN natural conditions the flower grows in tropical and subtropical areas of South America. In nature, the flowering of anthurium can be observed often, so that it blooms, no effort is needed. However, many people want to have this plant on their windowsill in a house or apartment, where living conditions are not at all the same as in the tropics. Some of those who grow this flower are wondering why the anthurium does not bloom? To see it bloom beautiful plant, care for him should be correct and the conditions of his maintenance should be as close to natural as possible.

The main reasons why there are no flowers on the bush

Often, anthurium does not bloom at home, because it is not cared for correctly, and there are certain mistakes made by the grower during the cultivation of this tropical plant. Why do anthuriums not have flower stalks, buds and flowers? This may be due to such reasons:

• the plant receives little sunlight, or vice versa, too much, the sun's rays can burn the leaves;
• the room is cool during the period when the flower should have buds;
• insufficient soil moisture, due to which the roots begin to dry out, the leaves wither, as they receive few nutrients;
• watering the soil is done too often;
• the air in the room is too dry;
• very rarely, or vice versa, too often fertilized;
• the pot in which the plant is located is not chosen correctly, it has too large diameter and depth;
• frequent change of location of the flower;
• various pests, diseases;
• location of anthurium in a draft;
• many withered buds on the bush.

These are the main reasons why anthurium does not bloom. Quite logical questions arise: how can you make anthurium bloom? What to do, and how to help the plant to see beautiful flowering?

How to make a bush bloom

How to make it bloom? First of all, it must be placed on the east or west windowsill, where the anthurium will receive a sufficient amount of sunlight. It is desirable that diffused light falls on the flower, because due to the direct rays of the sun, the leaves may begin to turn yellow and the bush will become weak and lethargic. Anthurium is a light-loving plant, it does not bloom if it is in a dark corner of the room or in the corridor, where light enters very rarely.

To help Anthurium bloom can be transplanted into suitable soil. You can not grow a plant in dense soil, where moisture and air do not penetrate well to the root system. The substrate must be porous, breathable. If room anthurium does not bloom, then you can choose for it suitable soil by mixing:

• two parts of humus and peat;
• one part perlite;
• four pieces of store-bought orchid substrate.

This mixture must be disinfected in the oven for 15-20 minutes, you can add a little crushed charcoal to it. Such a substrate is nutritious, and it passes water and air well to the roots.

If the anthurium does not bloom, then you can analyze the irrigation regime. In natural conditions, where it grows, it rains for six months in a row, so this plant will never bloom in dry soil. To help anthurium and accelerate flowering, you need to regularly moisten the soil. As soon as the top layer of soil dries up, it indicates the need for watering.

What else to do if the bush does not bloom? You can help it bloom by moistening the air. Do not forget that anthurium is a tropical flower, and the humidity in the tropics is very high, so it is advisable to moisten the leaves with a spray gun every day. Experienced flower growers use humidifiers, or simply put a flower pot in a tray filled with pebbles, gravel or crushed stone, and filled with water. But the pot should not be in direct contact with water. Due to this moisture, most likely there will be no problem of lack of flowering.

If flowering does not occur, then you can remember when the anthurium was last fertilized. The substrate may not always provide the plant with all the necessary trace elements that are needed for active growth, development and the appearance of flowers. In the period from spring to autumn, the plant needs regular top dressing. It is desirable to use a fertilizer with a high content of phosphorus, and it is desirable to apply less nitrogen. Special granular fertilizers are now sold in stores, which are applied once every 3 months. This is very convenient, since you do not need to worry about monthly top dressing.

If the anthurium does not bloom, then you need to look at the thermometer located in the house. The best temperature for this plant is 18-20 degrees. There must also be a dormant period, which usually begins at the end of autumn in a flower and lasts about 3 months. At this time, the temperature in the room should be about 16 degrees. In such cool conditions, the bush rests and gains strength for the next flowering.

At the end of winter, buds begin to form on the plant, so around mid-February, the temperature in the room should be increased to 18 degrees. But if the temperature in the house exceeds 20-21 degrees, then, most likely, flowering will not occur. IN summer period best temperature is 20-25 degrees. Throughout the year, the bush must be protected from drafts, as they adversely affect the plant and are often the reason why there are no flowers.

What to do if a bush purchased in a store stops blooming?

Did the purchased anthurium stop blooming? This is quite common, because many houseplants sold in the store grow in small pots with very little peat soil. In addition, often store flowers are treated with chemicals and abundantly fertilized with special dressings, which make the bush bloom for several months. Therefore, the first thing to do after acquiring a flower is to transplant it into a nutrient substrate and wait a few months for the root system to grow and strengthen. If you do not transplant the anthurium, then it will quickly deplete and most likely die.

However, sometimes even after transplanting, the bush does not begin to form buds. What to do, how to help the plant bloom? Needed in late autumn or early winter period move the bush to a room where the temperature is 16-18 degrees. There should be enough light in this room, you can even turn on artificial lighting for several hours. Do not forget about watering the anthurium, it is necessary to moisten the soil regularly, but much less than in the summer. The substrate should not be allowed to be excessively wet, it should be slightly damp.

After about one and a half to two months, young shoots will appear, this signals that it is time to transfer the bush to a warm room and increase soil moisture. The temperature in the room at this time should be about 23 degrees. If the bush did not want to bloom before, then in warm room a peduncle will definitely appear. If subsequent care of the bush is regular and correct, then the flower will feel comfortable and flowering will last up to 8 weeks.

IN South America they joke, they say, put the anthurium on the ground, and then the plant itself, if necessary, will dig into the ground, climb a tree and bloom. Indeed, in the conditions of the subtropics and tropics, where there is everything necessary for growth, and the climate is only favorable, it is not difficult to get bright inflorescences.

But what if the place of residence of the flower is a window sill in a city apartment, and the indoor anthurium does not want to bloom in any way?

In the shadow of the tropical forests of Colombia and Ecuador, anthuriums will bloom throughout the year without any effort. Therefore, the grower, who decides to get an equally spectacular and long flowering at home, will have to try and create a semblance of a foggy alpine forest for the pet.

Why does anthurium not bloom?

First of all, it is necessary to assess the conditions in which the plant is located. Sometimes the anthurium does not bloom due to oversight or mistakes made by the grower. And until they are corrected, it is not worth waiting for the appearance of anthurium buds.

Discomfort that can affect a culture so that it refuses to bloom is associated with various aspects of maintenance. This:

• insufficient or excessively bright lighting that burns the plant;
• low air temperature at the time of the appearance of anthurium buds;
• prolonged waterlogging of the soil;
• insufficient, leading to drying out of the roots, withering of the green part and deficiency nutrients;
• excessive dryness of the air;
• excess or lack of nutrients in the substrate.

Do not forget that indoor anthurium rarely forms inflorescences if a too large pot is mistakenly selected for it.

Indeed, until the root system completely occupies the entire volume of the substrate due to the plant, the development of the aerial part is suspended.

Not in the best way, the course of flowering is also affected by being on a bush of peduncles with already fading inflorescences. Such cobs take away from the plant the strength necessary for the growth and opening of new buds on the anthurium.

How to make anthurium bloom?

Wondering why flower stalks do not appear at the anthurium, the flower grower should first of all pay attention to the level of lighting in the place where the pot stands. The length of daylight and its intensity have a decisive influence on flowering.

Since the formation and deployment of buds in anthurium occurs in the spring, when daylight hours are just beginning to lengthen, the plant sometimes lacks light. This is expressed in the stretching of the cuttings of the leaves and a paler than usual color. In this case, the pot can be transferred to a lighter windowsill or use special ones.

For indoor anthurium, it is extremely important to be planted in suitable soil. Often, plants suffer from an excessively dense substrate that prevents air and moisture from evenly penetrating to the roots, accumulating moisture and causing the reproduction of all kinds of pathogenic microorganisms.

As a result of an illiterate selection of the soil mixture, the plant either dries up or is regularly waterlogged. In the conditions of a foggy tropical forest, so named because of the frequent rains that create a fog-like haze in the air, anthuriums are found in moist air and soil. But due to the high porosity of the substrate, the root system of the plant does not suffer and, on the contrary, is actively developing. Anthurium blooms without ceasing. A similar mixture can be made at home by mixing:

• 2 parts of humus;
• 2 parts;
• 1 part perlite;
• 4 parts ready ground for an orchid.

If there is no substrate for orchids at hand, it can be replaced in the same volume with crushed one to give structure. charcoal, steamed chopped bark coniferous trees and fine gravel. Such soil mix should have an acidity level of 6.5 to 7.0 units.

Planting indoor anthurium in a similar substrate will provide the plant with the necessary nutrition, and will not allow the roots to experience a lack of air and moisture. They will not be squeezed and will easily wrap around the entire clod of soil in the pot.

Anthurium needs frequent watering, at which its roots would absorb the entire volume of moisture entering the pot.

In the homeland of the plant, almost constant rains fall for 6–9 months, so a dried flower will never bloom. For the comfort of anthurium, the soil is kept moist, but not damp. And the drying top layer of the substrate signals the need for watering.

If the soil for indoor anthurium needs moderately moist, then the best air humidity is close to 100%. Unfortunately, it is unlikely that it will be possible to create a semblance of fog for a non-flowering indoor anthurium in an apartment, but use everything available ways combating excessive dryness of the air is extremely important.

For this, plants are irrigated from a spray bottle, household humidifiers and other improvised means are used. Works effectively normal pallet filled with gravel for drainage and filled with water. Fill a shallow pot with coarse gravel. If you put a pot with indoor anthurium on the surface of a layer of gravel, it should not come into contact with moisture, but life will become more comfortable for the plant.

Sometimes indoor plant lovers, diligently watering and transplanting their pets, completely forget about such a necessary measure as fertilizing home plantings.

When indoor anthurium does not bloom, one of the reasons for this is a lack of nutrients. Loose, consisting of rather large fragments, the soil for anthurium cannot always provide all the elements vital for the growth, development and flowering of the culture. Therefore, during the period of active vegetation, from spring to autumn, the plant must be fed.

To do this, it is easy to use complex compositions for flowering plants, but you need to remember that an overabundance can cause increased foliage growth. But at the same time, overfed anthurium will stop blooming. And sometimes an excess of fertilizer causes acidification of the substrate and the development of rot on young roots.

It is best to stimulate the appearance of buds on the anthurium by feeding it with a composition with a high content of phosphorus, an element that is extremely important at the stage of flowering and the formation of ovaries. Today, flower growers are increasingly using granular fertilizers with a long period of activity. Such funds can be applied every three months, and the label should indicate that the top dressing is intended for flowering crops.

Bought anthurium stopped blooming

novice amateurs tropical plants often faced with the fact that the anthurium, recently bought and struck by an abundance of peduncles, has ceased to bloom. At the same time, new foliage on a green pet is not visible. How to help the plant, heal and make the anthurium bloom again?

Such an instance, first of all, must be transplanted and allowed to gain strength. From industrial plantations to the shelves, most indoor plants come in shipping pots and a small amount of peat soil, richly flavored with fertilizers and chemicals. These funds, the supply of which is designed for a couple of months, make indoor anthurium bloom. But neither the roots nor the aerial part, which also supplies food, develops. If urgent measures are not taken, the plant is depleted and often dies.

After transplantation, the pet needs several months to strengthen and build up the root mass. If you maintain the proper conditions, then in the spring the long-awaited flower stalks will appear on the anthurium.

Sometimes flower growers cannot wait for the flowering of young plants that did not please the owners before. bright inflorescences. To provoke such an indoor anthurium to form buds, you can use the methods used in greenhouses.

late autumn or at the beginning of winter, the anthurium is placed in a room with a temperature of 16–20 ° C. In such a room it should be light, and if necessary, artificial lighting should not be abandoned. Watering the plant needs regular, but not as plentiful as in summer months when the air is noticeably warmer. The soil should be moist, but never wet.

After 1.5–2 months, when the crown is replenished with new shoots, the anthurium is transferred to heat and watering is increased. Optimum temperature for this period is 22–24 °C. Anthurium, which has not bloomed before, will definitely release the first peduncle. And the subsequent flowering, if you do not forget about the proper care and comfort for the anthurium, will last about six or eight weeks.

How to water anthurium - video